• Enforce an effective QA program, which follows the guidelines of the company QA Manuals, processes, and customer requirements.

• Report periodically direct to Management on performance relating to quality processes, within the projects and the shipyard

• Managing and planning the inspection activities in production, and resource planning for carrying out QA and QC activities, including NDT, Welding inspections; inspection test procedures.

• Monitoring the quality standards of yard and contractors; and the main liaison throughout projects in terms of quality, for both internal and external parties

• To identify and analyze any quality procedural or product issues, and providing corrective action plans for parties to work on

• Acting as the main champion for continuous improvement, and spearheading process improvements within the organization

• Keeping track on the quality standards in the shipyard, and ensure compliance and preparedness for internal and external audits

• Improving quality assurance processes and practices. Involved in the recruitment and mentoring of QA Engineers.

• Overseeing and coordinating the investigation of Customer Complaints and Non-conformities.

• Interfaces with customer representatives in matters pertaining to quality for assigned tasks

• Prepare product and process quality reports by collecting, analyzing, and summarizing information and trends

• Develop and report on Quality Key Performance Indicators

• Liaise with the customer and classification societies on all quality issues

• Ensure the implementation of project Quality Plans

• Review contract documentation/specifications/quality plans to identify the quality requirements and documentation deliverables.

• Conduct any quality hold points/inspections/tests or other customer nominated activities.

• Carry out materials inspections and verify segregation and traceability of materials

• Carry out welding inspections at all stages of the process

• Fit-Up Inspection (Including surveillance of pre-heat requirements)

• In-Process Welding Inspection

• Finial Visual Inspection of Completed Welds

• Witness Production verification activities (Dimensional Inspection, FAT's etc.)

• Carry out sub-contract surveillance activities where required

• Co-ordinate Customer/3rd party inspections.

• Control, populate and sign-off Welding Logs as the works progress

• Ensure the approved project Inspection & Test Plans are adhered too, signed off, and verification documentation is available at the appropriate stages of the manufacture, inspection and test process.

Position Summary:

The Quality Control Engineer is an experienced engineer with a good understanding of construction principles, standards and processes. The QC Engineer is responsible to identify the measures and controls required to give a reasonably practical assurance that the quality of the works will be achieved.

The QC Engineer will have a detailed understanding of the project specifications and legal/contract/company quality requirements.

This QC Engineer will be involved in reviewing method statements and preparing inspection and test plans. They will also train and advise project staff on quality matters, monitor the progress of submissions, inspections and tests. They will coordinate the management of defects and nonconformances.

Note: The QC Engineer does is not responsible to undertake frontline inspections or tests, they are there to support the Site Engineers and ensure the Quality Control systems is functioning effectively.

Responsibilities:

•Study and understand legal and contractual requirements for the works including specification

•Study and understand standards and in-house requirements

•Develop inspection & test plans and records systems, and work procedures

•Review method statements, and confirm they are being followed

•Train and advise project personnel on the QC system;

•Monitor the QC activities of site engineers/supervisors, and review quality records

•Report on the QC status of the works, maintain QC filing, make QC submissions to Client

•Coordinate the reporting and resolution of non-conforming works

Skill:

•Excellent technical knowledge of construction methods, quality controls, risks to quality and acceptance criteria

•Well organised/effective administrator

•Able to work in a team and communicate effectively while also being strongly independent and able to challenge non-compliance.

•Computer literate / digital tool literate

Requirement :

Singaporean only

University Degree in Civil or Structural Engineering (or equivalent)

Engineer: 4 years + experience in on-site construction works

Who we are

Oishi Manufacturing Pte Ltd, established in 2003, is a prominent manufacturer and wholesale supplier of frozen desserts in Singapore. Specializing in halal-certified ice creams, gelato, and sorbets, the company serves a diverse range of clients including hotels, restaurants, cafes, fast food chains, and distributors.

Oishi operates from a 18,000 sq. ft. facility, offering both its own brands—like ArtisertZ—and customized OEM services. Their product range extends beyond frozen treats, including soft-serve pre-mixes, waffle and pancake premixes, frozen lava cakes, and equipment like soft-serve machines. The company is known for its commitment to high quality and halal compliance, holding certifications like FSSC 22000​ and BRCGS.

Oishi caters to both local and international markets, priding itself on reliable delivery services and competitive pricing. This has solidified its reputation as a preferred business partner within the food industry​

Job Description

1. Monitoring Production Processes: Ensuring that all manufacturing processes comply with established standards and regulations. This involves frequent inspection of equipment, facilities, and procedures to identify any deviations or potential issues.

Quality Testing: Conducting regular quality tests on raw materials, in-process samples, and finished products. This may involve various tests such as sensory evaluation, chemical analysis, and microbiological testing to ensure that products meet safety and quality specifications.

Documentation and Record-Keeping: Maintaining detailed records of quality tests, inspections, and any deviations observed during the production process. Documentation is essential for traceability and compliance with regulatory requirements.

Troubleshooting and Problem-Solving: Identifying the root causes of quality issues and implementing corrective actions to prevent recurrence. This may involve working closely with production teams to address process inefficiencies or equipment malfunctions.

Training and Education: Providing training to production staff on quality control procedures, food safety practices, and regulatory requirements. Ensuring that all employees understand their roles in maintaining product quality and safety.

Continuous Improvement: Participating in continuous improvement initiatives to enhance quality control processes and optimize production efficiency. This may involve implementing new technologies, adopting best practices, and staying updated on industry trends and advancements.

Compliance with Regulations: Ensuring compliance with local regulatory requirements, such as those set by the Singapore Food Agency (SFA) and other relevant authorities. This includes staying updated on changes to regulations and ensuring that manufacturing processes align with current standards.

Requirements:

1. Educational Background: A bachelor's degree or higher in food science, food technology, microbiology, chemistry, or a related field. Some positions may require specific certifications or training in food safety and quality management systems.
2. Experience: Previous experience in a quality control or assurance role within the food manufacturing industry is often preferred. This could range from entry-level positions for recent graduates to mid-level or senior roles requiring several years of relevant experience.
3. Knowledge of Food Safety Regulations: Familiarity with local and international food safety regulations and standards is essential. In Singapore, this includes regulations set by the Singapore Food Agency (SFA) as well as international standards such as ISO 22000 and Hazard Analysis and Critical Control Points (HACCP).
4. Analytical Skills: Strong analytical skills are necessary for conducting quality tests, interpreting data, and identifying trends or deviations in production processes. Proficiency in statistical analysis and data interpretation may be required for more advanced roles.
5. Attention to Detail: A keen attention to detail is crucial for conducting thorough inspections, identifying quality issues, and ensuring compliance with quality standards and specifications.
6. Communication Skills: Effective communication skills are important for collaborating with cross-functional teams, documenting quality issues, and communicating findings and recommendations to management.
7. Problem-Solving Abilities: The ability to troubleshoot quality issues, identify root causes, and implement corrective actions is essential for ensuring continuous improvement in quality control processes.
8. Teamwork and Collaboration: The ability to work effectively as part of a team is important in a production environment. Quality control personnel often collaborate closely with production, engineering, and quality assurance teams to maintain product quality and safety.
9. Adaptability: The food manufacturing industry is dynamic, and individuals in quality control roles must be adaptable to changing circumstances, such as new product introductions, process improvements, or regulatory changes.
10. Computer Skills: Proficiency in using computer software for data analysis, documentation, and reporting is typically required. This may include spreadsheet software, statistical analysis tools, and quality management software.

​My client is currently hiring a Business Control AVP for their Private Banking Business. This is a new headcount sitting within the Private Banking team, the incumbent will be performing new account opening / account review and developing AML control strategies to optimize account opening and underwriting opportunities to support business growth, while ensuring an appropriate balance between risk and return.

RESPONSIBILITIES:

The incumbent will be responsible in performing client due diligence on-boarding checks and review as defined by prevailing policies and guidelines. You will also take ownership in clearing system generated name screening alerts or perform manual screening.

This role requires a close collaboration with front office and other stakeholders to supplement and improve relevant operating procedures to ensure full compliance with policies and regulatory.

Additionally, you will ensure full compliance of operation manual, investment & insurance sales workflow, sales guideline to PB frontline and ensure client due diligence & client suitability checks are in order, and to ensure accuracy of capture to avoid incidents and dealing errors.

REQUIREMENTS:

To be qualified for this position,

• Degree holder
• Minimum 5 years of relevant experience in banking in compliance, risk and operation management.
• At least 3 years of hands-on experience in the AML field (client onboarding review [including documentation], ongoing periodic client review, transactions monitoring) in a Private Bank and must be familiar with the MAS 626 requirements or other international AML/CFT standards.
• In depth understanding of risk management for private banking products, investment products and credit products & delivery channel.
• Familiar with relevant regulatory and statutory requirements.

Please contact Xuan Kwok at +65 6950 0354 or [email protected] for a confidential discussion.

EA License no: 16S8066 | Reg no.: R1433611

Only successful candidates will be notified.

Job Scope

• Responsible to review and approve master batch records and subsequent batch records
• Review and approve cleaning records and procedures and ensure compliance with set
• Review and approve GMP documentation Ensure adherence to quality procedures, regulatory requirements and cGMPs.
• Review and approve deviations according to the site procedures
• Handle product complaints.
• Ensure complaints are investigated thoroughly with CAPAs effective to prevent recurrence.
• Coordinate with cross-functional team to prepare Annual Product Reviews, discuss trends and atypical observations and recommend improvement actions.
• Conduct internal and external audits
• Maintain inspection readiness and support inspections from regulatory agencies and customers.
• Actively participate in GMP walk downs to ensure site operation and facility maintained in inspection ready state.
• Support the maintenance of validated stated of GMP systems and processes.
• Facilitate and prepare regulatory submissions and attend to regulatory queries in a timely manner

Requirements

• Min Degree in Science / Chemical Engineering or equivalent with relevant pharmaceutical experience.
• Minimum 1-3 relevant years of experience in QA/QC and GMP Compliance
• Familiar with manufacturing operations applications; six sigma and lean principles and process improvement tools.
• Thorough knowledge of GMP compliance regulations, ICH Q7a Guidelines, Good Documentation Practices and other applicable regulations.
• Proven track record of continuous improvement in quality operations or manufacturing.

All qualified applicants, please send in your resume to: [email protected]

Alex Goh Hock Leong (R1763413)

Recruit Express Pte Ltd | Company Reg. No. 199601303W | EA License Number: 99C4599

Our client is a leading logistics company. They are looking for a Senior Quality Executive to assist their Quality team for the next phrase of their business. They are located at West of Singapore– easily accessible. The Senior Quality Executive is responsible for:

Duties

• Establish, update, and uphold the Quality and Environmental Management System (QEMS) in alignment with ISO 9001:2015, collaborating with stakeholders to create and revise relevant procedures.
• Track quality trends and performance metrics, ensuring continuous improvement within the organization.
• Manage internal and external ISO 9001:2015 certification processes, audits, and compliance to meet all required standards and objectives.
• Communicate quality assurance strategies and processes across the organization through quality programs, training, and awareness initiatives.
• Lead monthly quality review meetings, generate performance reports, and conduct site inspections to ensure compliance with quality standards.
• Participate in customer audits, lead investigations into quality issues, manage supplier onboarding, and address improvement areas based on non-conformities.

Requirements

• Min Diploma or Bachelor’s degree from an accredited institution in relevant Quality, Science or Engineering studies.
• Min 3-5 years of working experience in the quality function preferably in chemical, manufacturing, or logistics industry.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Reg. No. R23115141 (Tan Su Yee)

Location: Chinatown

Woirking hours: 8.30am to 5.30pm (Mon-Fri)

Job Scope

• Assist in the development, management, and implementation of the framework across schools.
• Support the Vice President in monitoring, reviewing, and evaluating the effectiveness of the framework and the knowledge repository.
• Coordinate with school leaders and staff to ensure effective adoption and implementation of standardised policies and procedures.
• Maintain documentation of all policies and procedures, ensuring they are up-to-date and accessible in the knowledge repository.
• Support the Vice President in serving as an internal assessor for schools preparing for EduTrust certification.
• Assist in reviewing EduTrust-related documents.
• Assist in the development and implementation of data protection policies and procedures.
• Support in conducting data protection risk assessments and audits across all schools.
• Coordinate data protection training and awareness programmes for staff.
• Other ad hoc duties assigned

Job Requirements

• Bachelor’s degree in Education, Business Administration, Quality Management, or a related field.

• Minimum of 3 years of experience in quality assurance, compliance management, or a related field.

• Minimum of 1 year of experience with data protection and privacy laws, and their implementation in organisational processes.

• Knowledge of quality/compliance management systems and frameworks (e.g., EduTrust, ISO 21001) is essential.

• Any additional certifications in quality management or project management will be beneficial.

Interested applicants please send your resumes to [email protected]

Jessica Nguyen Huynh Thanh Truc

Recruiter (R23113787)

EA License No. 99C4599

We regret that only shortlisted candidates will be notified.

• Well Established Company
• Basic $3000 - $4500 + Allowance + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: East
• Working hours : Normal working hours
• Training provided for those without/lesser experience

Job Responsibilities:

• Manage project and site activities, attend project meeting
• Perform equipment set up, start-up and commissioning
• Project implementation to ensure the successful and smooth delivery of systems/projects through effective planning, management, and deployment of resources
• Provide technical support and troubleshoot equipment faults after project handover
• Familiar with Singapore safety regulations and process. Prepare and submit project safety documents
• Manage project-related submission and paperwork by ensuring all necessary materials are current, properly filed and stored
• Works closely with the Project Team, Manufacturers and Vendors to deliver Customer’s expectation within timeline
• Involves in technical specifications review of the project scope
• Provide operational and maintenance training to customers
• Any ad hoc duties as assigned

Job Requirements:

• Minimum ITE/Diploma/Degree in Mechanical Engineering or its equivalent
• Training provided for those without/lesser experience

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

Leong Wei Ling (R23117584)

EA Recruitment Pte Ltd

EA License No: 21C0492

[Job ID:670864]

Responsibilities:

• Troubleshoot and resolve technical issues related to semiconductor equipment and systems, including computer systems, complex software, and networked or wireless systems.
• Perform on-site installations, oversee continual improvement programs, carry out parts overhauls, preventive maintenance, modifications, and repairs on equipment.
• Act as the company's liaison with customers on both administrative and technical matters for assigned projects.
• Coordinate logistics and communicate with customers regarding equipment-related issues.
• Address customer complaints and provide timely solutions to resolve their concerns.
• Monitor product performance, provide regular updates, and report feedback on customer service requests.
• Report recurring customer complaints to management for future resolution and reference.

Requirements:

• Must Have:Minimum Poly Diploma/ Bachelor's Degree in Electrical/Electronics/Mechanical/Mechatronics Engineering
  At least 2 years of relevant experience with semiconductor equipment.
• Strong communication and interpersonal skills.
• Detail-oriented, organized, and a resourceful team player.
• A highly motivated individual capable of working independently with minimal supervision.
• Able to work in a cleanroom environment.
• Willing to work or be on standby during after-office hours, weekends, or public holidays.
  

We regret that only shortlisted candidates will be notified. However, rest assured that all applications will be updated to our resume bank for future opportunities

Please kindly refer to the Private Policy of Good Job Creations for your reference: https://goodjobcreations.com.sg/en/privacy-policy/

EA Personnel Name: Wong Slaine

EA Personnel Reg. no.: R2096245

EA License no.: 07C5771

[Job ID: 759655]

Responsibilities:

• Manage the day-to-day sales activities for the semiconductor manufacturing equipment products within the designated sales territory so as to achieve the sales target set by management.
• Monitor, regulate and direct the activities of the sales representatives to maximize the market opportunities.
• To make forecasts / targets regularly and to monitor performance of the sales team in relation to these forecasts.
• To drive new marketing promotion efforts and to work with EC on the implementing the marketing and promotions efforts for the semiconductor manufacturing equipment products
• To make, develop and manage the localized marketing and sales program for the sales territory.
• To communicate with the sales team to understand customer demands and offer sales support where necessary.
• To work with EC to set the industry pricing level.
• To manage the SAP ERP system for monitoring the progress of quotations, purchase orders, delivery and invoicing of customers.
• To work closely with EC on the new accounts and new products, using the local team to win new contracts.
• Establish customer rapport an acceptance.
• Any other duties as assigned by the management.

Requirements:

• 5 years of sales experience in semiconductor industry.
• Knowledge of commercial and shipping documents (Incoterms).
• Knowledge of the semiconductor manufacturing equipment products (e.g. CMP Tools).
• Good people skills with a pleasant personality.
• Strong communication, interpersonal and customer service skills.
• Excellent presentation and negotiation skills.
• Ability to work independently as well as collaboratively within the team.
• Must be prepared to travel overseas for training and to our customers’ location in the region as required.

We are regret that only shortlisted candidate will be notified.
However, rest assured that all applications will be updated to our resume bank for future opportunities.

Please kindly refer to the Privacy Policy of Good Job Creations for your reference: https://goodjobcreations.com.sg/en/privacy-policy/

EA Personnel Name: Voon Jie Ying
EA Personnel Reg. No.: R1872434
EA Licence No.: 07C5771

Job Description:

Be part of an exciting team working on cutting-edge advanced packaging process technologies. Participate in process development and integration solution to enable advanced packaging process technologies in the world of mobile, IoT, consumer and high-performance computing area. Partner and work with various teams from inside and outside of IME to help develop leading-edge packaging solutions for our customers, taking the solutions from concept to mass production. Responsibilities will include assisting in operations support in clean room to make sure projects are completed successfully and delivered on time.

This position is based in Singapore.

Responsibilities:

• Operate semiconductor equipment to perform processes, measurement, and inspection of wafers. (Include equipment setup, loading and unloading of wafers)
• Monitor basic equipment/process errors and perform recovery.
• Work with internal and external parties to align for tool time, execute process sequence and collect data to feedback to integration owner.
• Logistically transport wafer lots between equipment within cleanroom and between worksites.
• Identify and address potential areas for improvements such as cycle time, utilization, and cost.
• Perform chemical change/ top-up for equipment under supervision.
• Understand and follow all Environmental, Health and Safety (EHS) procedures and requirements.
• The candidate may be required to perform shift work (Mon-Fri).

Experience:

• NITEC/ Diploma in Electrical/Mechanical/Chemical Engineering
• Basic understanding on semiconductor process is preferred
• 1-3 years of experience in semiconductor processes (Litho, Etch, CVD, PVD, Plating, Metrology etc.) will be added advantages

Responsibilities

• Plan, execute, monitor and control the various technical aspect of the project.
• Manage or participate in new setup or upgrade of system/network infrastructure projects.
• Responsible for supporting operational systems satisfying contractual Service Level Agreement
• Perform and manage routine preventive maintenance and operational activities
• Provide project documentation and reports
• Diagnose and rectify technical issue

Requirements

• Experience in Windows server OS, Unix/Linux OS & VM environment
• Good knowledge and hands-on experience with Microsoft SQL Server would be an advantage
• Good Working knowledge with VPN, firewall appliances and Cisco routers/switches
• Excellent written and verbal communication to convey technical ideas to both technical and non-technical audiences and contribute within a team environment
• Pro-active, dynamic and with good analytical/conceptual thinking
• Fresh graduates are welcome to apply

Only shortlisted candidates will be notified.

Please email a copy of your detailed resume to [email protected] for immediate processing.

(EA Reg No: 20C0312)

Company’s Profile
Julian Grey’s client is a solution provider for security and enterprise applications.

Key Responsibilities

• Accurately document all equipment deliveries and removals.
• Conduct routine audits to ensure inventory integrity and compliance.
• Use equipment such as pallet jacks to facilitate safe item movement.
• Work within a ticketing system to manage tasks and assignments effectively.
• Execute the secure destruction of data-storing devices, including hard drives and SSDs.
• Manage shipping, receiving, and inventory processes.
• Prioritize and resolve tickets, escalate issues, and handle blockers to sustain inventory operations in line with service agreements.
• Be prepared to work outside standard business hours, including weekends or holidays, as needed.

Qualifications and Skills

• Diploma or Degree in IT, Computer Engineering, or a related discipline.
• At least one year of experience in IT Support or Systems Monitoring (fresh graduates with a proactive attitude are encouraged to apply).
• Minimum six months of experience in Inventory Control, Logistics, or Warehouse Management.
• Capable of performing physical tasks, including lifting and working at heights, with or without equipment assistance.
• Excellent communication skills in English, both spoken and written.
• Motivation to grow and learn new technical skills.

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Please WA Jian Wei @ 87389860
Shortlisted candidates will be notified

Quek Jian Wei
Reg No. R22110928
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

This position is a member of the Quality Systems team which supports the implementation and maintenance of various Quality Systems and to guarantee the quality oversight for validation related activities which includes Data Integrity at site.

Responsibilities

• Support the site projects on Qualification/ Validation

· Assessment and Approval of Documents

• Responsible to review and approve the Quality Control related (Analytical Instrument Qualification, Analytical and Microbiology Method Validation, Critical Reagent Qualification) protocols, reports, procedures and other related documents to ensure compliance to internal procedures and regulatory requirements.

• Evaluate and approve discrepancy related to qualification/validation protocols in order to guarantee documentation of the incidents and identification of corrective actions.

• Support collaboration and participations in projects as Quality Representative for Quality Systems and Validation.

• Support in multisite initiatives to ensure harmonization of Quality Systems and qualification/validation related activities between the plants.

• Any other duties as assigned by Manager/ Supervisor.

Requirements

• Degree in pharmaceutical sciences, life sciences, biology, biotechnology chemistry, chemical engineering, engineering or a related discipline.

• Certification and trainings such as Certified Quality Engineer or specific Validation topics will be advantages.

• Min experience of 2-3 years in the pharmaceutical or biotechnology in quality assurance, manufacturing operations or validation

Interested candidates please send in your resume to:

[email protected]

EA Personnel: Valerie Yong Kian Fung

CEI No.: R1103704

Recruit Express Pte Ltd, EA License No.: 99C4599

Key Responsibilities:

• Component Enhancement: Enhance and maintain components within a comprehensive environment for systematic risk trading, utilizing modern C++ and Python, integrated with q/kdb+ for analytics and user interfaces.
• Requirements Analysis: Analyze business requirements with the Equity Line of Business (LOB), and create architectural designs for low latency C++ components, particularly for market making activities.
• Collaboration: Collaborate closely with the Site Reliability Engineering group to ensure industry-leading reliability and scalability of trading solutions.
• Core Development: Lead the core development and testing of low latency components, ensuring optimal performance and minimal downtime.
• Automation Focus: Promote an automation-first mindset across the software development lifecycle, emphasizing shift-left testing practices.
• Team Culture: Foster a responsible and professional culture within project teams, encouraging collaboration and accountability.
• Communication: Communicate effectively with both technical and non-technical stakeholders to ensure alignment and understanding of project objectives.

Key Requirements:

• Minimum of 8 years of extensive experience in C++ development on Linux, with a strong focus on building quantitative electronic trading applications.
• Specific exposure to automated on-exchange market making is preferred.
• Strong programming skills in C++, with practical exposure to Python development.
• Familiarity with Agile software development practices and the ability to implement associated best practices.
• Knowledge of equities, futures, options, and FX asset classes, along with algorithmic trading strategies for these products.
• Familiarity with regulatory requirements for trading in APAC markets.
• Working knowledge of architecting applications for cloud and/or containerized environments.
• Strong communication skills, capable of collaborating effectively with diverse teams and stakeholders.

Sales Engineer

Location: Loyang Way
Working Days: Mon - Fri
Working hours: 830 a.m. to 530p.m.
Salary: $3,000 - $4,500 (depends on experience)

Position Overview:
We are seeking a motivated and experienced Sales Engineer to join our team. The Sales Engineer will play a critical role in driving sales and delivering technical solutions that meet our clients’ needs. This role requires a blend of technical expertise and sales acumen, as you will work closely with customers to understand their requirements, present tailored solutions, and support the sales process from inception through to implementation.

Key Responsibilities:

1. Customer Engagement and Relationship Management:

• Develop and maintain strong relationships with key customers and stakeholders.
• Conduct needs assessments to understand customer requirements and challenges.
• Provide technical consultation to customers, offering solutions that align with their operational goals.

2. Sales Support:

• Scout, develop and obtain leads with new customers to develop sales in your assigned territory.
• Prepare and deliver compelling presentations and product demonstrations to potential clients.
• Develop detailed quotes and proposals, addressing customer needs and specifying technical requirements.

3. Service Support:

• Liaise with customers, end-users and purchasers to introduce the company’s service capabilities.
• Drive the sales of services to existing and new customers with equipment sold by the company.
• Coordinate with the engineering and service teams to ensure seamless project execution and delivery.
• Act as a point of contact for post-sales support, troubleshooting and sales of service.

4. Market and Product Knowledge:

• Stay up to date with industry trends, emerging technologies, and competitive landscape.
• Continuously enhance product knowledge and understand advancements in equipment and service offerings.
• Share insights, feedback and customer requirements with the product development and marketing teams to drive innovation.
• Participate in all company-participated trade shows and seminars in Singapore and abroad.

5. Training and Support:

• Educate customers on equipment features, benefits, and maintenance requirements.
• Conduct training sessions for customers and internal teams to ensure proper usage and understanding of products.
• Assist management with any other ad-hoc tasks and duties as and where required.

Requirements

• Education: Bachelor’s degree in engineering, Mechanical Engineering, Electrical Engineering preferred or related technical field, Minimum Diploma in related technical field.
• Experience: Minimum of 3 years of experience in a sales engineering role, preferably within the equipment sales and service industry.
• Technical Skills: Strong understanding of vacuum pump technology or other technical equipment. Proficiency in technical sales and solution design.
• Sales Skills: Proven track record in achieving sales targets and managing customer relationships.
• Travel: Required to support regional customers in Southeast Asia (30-40%).

WhatsApp: https://wa.me/6591044149 (Shermaine)

Siah Sze Ming Reg No: R24125414

The Supreme HR Advisory Pte Ltd EA No: 14C7279

• Well Established Company
• Basic $3000 - $3800 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: West
• Working day: Monday to Friday
• Working hours: 8.15am to 5.15pm

Job Responsibilities:

• Responsible for outdoor and indoor repair work of all cleaning products
• Mechanical preventive maintenance - verify mechanical faults, replacement of spare parts and repair
• Work closely with service technicians for problem solving and coordinating jobs between field service and workshop repairs
• Any ad hoc duties as assigned

Job Requirements:

• Possess at least a Professional Certificate/ Nitec in any Electrical & Electronic or Mechatronics Engineering or relevant qualification
• Experience in repair of forklifts, automobiles, heavy industrial equipment, and knowledge in engines, motors and electrical would be relevant and useful

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

Leong Wei Ling (R23117584)

EA Recruitment Pte Ltd

EA License No: 21C0492

Location: Yishun

Mon to Fri 8.30am to 5.30pm

salary: $3000-$3500

Japanese MNC

Have AWS & bonus

Industry: Electronic component manufacturing

Job Highlight

• Work life balance
• Career progression

Job Description

• Serve existing customers
• Understand customers’ needs, obtain feedback, and accurately forecast short-term and long-term requirements.
• Proactively explores business opportunities and expands market share including developing and implementing market penetration strategies to maximize business opportunities.
• Other adhoc duties as assigned.

Requirements

• No experience / Fresh / Entry welcome
• Diploma in engineering
• Ability to communicate effectively in English and to be bilingual (for business communication)

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.

Alternatively, you may also email your resume to us at [email protected]

Emily Fong

Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443
EA Personnel Reg No.: R1768368

• Position : Senior Project Engineer (Building & Construction/Civil Engineering) - Up to $7,500
• Location : Resorts World Sentosa
• Working hours : Monday to Saturday | 8am to 5pm
• Salary (commensurate with experience) : Up to $7,500 + Performance Bonus + Transport Allowance + 14 Days Annual Leaves + Medical Benefits
• Duration : Permanent
• Industry : Engineering & Construction

Main Responsibilities:

• Monitor and manage the day-to-day operations of project
• Create project plans, schedules and budgets
• Liaise with Subcontractors, Surveyors and Site Supervisors/Foremen to make sure that works are carried out in time and smoothly on site
• Attend regular meetings with Owner/Client/Contractors/Subcontractors on the project related matters
• Carry out site inspection and ensure that the works are executed to the required quality standards

Requirements:

• Degree in Civil Engineering or equivalent with minimum 4 - 5 years of working experience in Building & Construction Industry.
• A team player with positive working attitude
• Bilingual in English and Mandarin to communicate with Chinese clients who can only speak mandarin.

Email to: [email protected]

Do visit www.facebook.com/search.personnel and https://www.instagram.com/search.personnel for more job listings and career tips!

***We do not charge our candidates any referral fee nor bind them with any contract.***

Chloe Ong

Senior Consulting Manager (APAC)

Reg no.: R22105510

EA No: 13C6684

• MNC Company
• Salary $3500 - $4500 + Allowances + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: West
• Working days: Monday to Friday
• Working hours: 8.30am – 5.30pm

Job Responsibilities:

• To supervise, execute and coordinate project activities together with a group of Engineers and Technicians leading to successful project completion
• Monitor and control project on schedule, within budgeted cost and quality standards
• Work closely with consultant/owner to ensure project is delivered according to requirements
• To perform system programming and troubleshooting during project implementation
• Any other tasks assigned by superior

Job Requirements:

• Possess minimum Higher Nitec and/or Diploma in Electronics and/or Electrical Engineering or relevant field with 1-2 years of relevant experience
• Possess Class 3 Driving License will be an advantage

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

Leong Wei Ling (R23117584)

EA Recruitment Pte Ltd

EA License No: 21C0492

• MNC Company
• Basic $3500 - $4000 + Allowance + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Jurong East
• Working days: Monday to Friday
• Working hours: 8.30am – 5.30pm

Job Responsibilities:

• Perform regular maintenance and carry out diagnostic analysis for trouble shooting and repair work
• Handling of measurement and detection equipment for military and homeland security
• Handle sales product enquiries
• Manage post-sales delivery of equipment
• Prepare basic reports
• Any other tasks assigned by superior

Job Requirements:

• Possess minimum Higher Nitec and/or Diploma in Electronics and/or Electrical Engineering or relevant field with 2-3 years of relevant experience
• Possess IT software installation and configuration skills will be an added advantage

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

Leong Wei Ling (R23117584)

EA Recruitment Pte Ltd

EA License No: 21C0492

• Review and approve shop drawings for RC and temporary works (e.g., struts, walers), and collaborate with consultants, the construction team, and authorities.
• In charge of structural design of temporary works, including scaffolding, falsework, and formwork.
• Take the lead or assist the project department in addressing design-related issues, while managing and resolving production, quality, design, engineering, and scheduling challenges.

Requirements:

• Degree in Civil Engineering or equivalent.
• At least 7 years of infrastructure project experience in structural design.
• Proficient in STADD, AutoCAD, and Microstation.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R24125585

• Manage Standardized Work Chart (SWC), subcontractors, and site staff to ensure on-time project completion and update clients, consultants, subcontractors, and stakeholders on project progress.
• Prepare method statements, identify drawing discrepancies, submit material and sample submissions, and provide technical advice to resolve M&E-related issues
• Inspect work to ensure compliance with contract specifications, codes of practice, and safety regulations, while coordinating with SWC on structural and civil work matter
• Conduct inspections with RTO/RE based on specifications and approved drawings.

Requirements:

• Diploma/Degree in Electrical/Mechanical Engineering or equivalent
• At least 5 years of experience including involvement in two MRT/LTA underground project
• Proficient in leading CSD/SEM coordination, design interface, and construction coordination for transit projects, including chairing and leading coordination meetings
• Strong experience in BIM software and AutoCAD.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R24125585

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a Associate Engineer/ Technician to be part of our IE&CE Advanced Mechatronics Department diverse team of talent.

What you will be working on:

• Fault identification, disassembly or removal of fault component
• Conduct acceptance tests on repaired part such that its functionality is repeatable and reproducible to ensure good quality
• Ensure proper knowledge transfer is conducted and supervise Industrial Attachment (IA) students
• Provide support to module Equipment Engineers and perform repairs for wafer fab frontline semiconductor production equipment and parts in cleanroom environment, on ad-hoc basis
• Adhere to SOP when performing repairs to ensure best quality and to strive to achieve 95% repair success rate
• Perform inventory control on consumables and spare parts used in repair workshop
• Source and liaise with vendors for quotations of required parts and follow up on delivery timeline
• Ensure workplace safety is practiced at all times

More about you:

• Diploma/ Higher Nitec/ Nitec (Microelectronics, Mechatronics, Electrical, Mechanical)
• Minimum 3 years of relevant experience in semiconductor field
• Fresh graduates are welcome to apply
• Expertise in either soldering, pumps, valves or strong knowledge in Microelectronics
• Able to perform circuit board repair and component level troubleshooting skills
• Resourceful and has initiative
• Working experience in front end semiconductor industry would be advantageous

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

Job Description:

Be part of an exciting team working on cutting-edge advanced packaging process technologies. Participate in process development and integration solution to enable advanced packaging process technologies in the world of mobile, IoT, consumer and high-performance computing area. Partner and work with various teams from inside and outside of IME to help develop leading-edge packaging solutions for our customers, taking the solutions from concept to mass production. Responsibilities will include assisting in operations support in clean room to make sure projects are completed successfully and delivered on time.

This position is based in Singapore.

Responsibilities:

• Operate semiconductor equipment to perform processes, measurement, and inspection of wafers. (Include equipment setup, loading and unloading of wafers)
• Monitor basic equipment/process errors and perform recovery.
• Work with internal and external parties to align for tool time, execute process sequence and collect data to feedback to integration owner.
• Logistically transport wafer lots between equipment within cleanroom and between worksites.
• Identify and address potential areas for improvements such as cycle time, utilization, and cost.
• Perform chemical change/ top-up for equipment under supervision.
• Understand and follow all Environmental, Health and Safety (EHS) procedures and requirements.
• The candidate may be required to perform shift work (Mon-Fri).

Experience:

• NITEC/ Diploma in Electrical/Mechanical/Chemical Engineering
• Basic understanding on semiconductor process is preferred
• 1-3 years of experience in semiconductor processes (Litho, Etch, CVD, PVD, Plating, Metrology etc.) will be added advantages