Responsibilities:

• Develop comprehensive project plans, schedules, budget estimates, resource allocation, and risk management strategies for infrastructure projects.
• Manage on-site project/construction activities to ensure compliance with design specifications, safety standards, and quality requirements.
• Ensure all project activities comply with environmental regulations and industry standards
• Monitor project expenditures and manage project budgets to avoid cost overruns.
• Identify and implement cost-saving measures without compromising quality or safety.
• Implement and enforce quality control measures to ensure high standards of workmanship and materials.
• Strong knowledge in Construction Productivity in Productivity Enhancement
• More job-related scope will be brief during Interview.

Requirements:

• Knowledge in Architecture Engineering or related field
• Specialist Diploma in Construction Productivity (SDCP) certificate and Basic Concept in Construction Productivity Enhancement (BCCPE) certificate required.
• At least 5 years of relevant experience in the construction industries
• Able to start work immediate or within short notice.

Job Role:

(a) Checking the logs of the network equipment and network links every morning to ensure no abnormal activities;

(b) Install, maintain and upgrade all hardware, firmware and software used;

(c) Apply software and security patches.

(d) Fine-tune the network or system parameters;

(e) Patch/Re-Patch cables in patch panels, network points and all network equipment;

(f) Labelling of cables, patch panels, racks and equipment;

(g) Create, delete or modify access rights for the network equipment related user accounts in terms of authentication, authorisation and accounting;

(h) Connect Customer-approved network equipment to the Customer’s network;

(i) Manage IP addresses and IP assignment scheme;

(j) Manage firewall rules setting and security configuration e.g. add, delete or modify firewall rules, change encryption keys;

(k) Perform troubleshooting to resolve network issues;

(l) Manage incidents

(m) Document and maintain configurations of all network hardware, cabling information and software used in the operating environment;

(n) Perform routine backup of network configuration for network equipment including firewall rules;

(o) Perform ClearPass administration for security posture check enforcement which minimally includes the following tasks:

· Review error logs for failed authentications;

· Verify the policies are active;

· Import Customer LDAP Data Interchange Format (LDF) file into the local user database;

· Housekeep the local users and static host list;

· Update posture policies for endpoint protection and Windows patches;

· Perform software updates and patching;

· Verify validity of certificates, trust lists and update status of Certificate Revocation Lists (CRLs); and

· Downloading and viewing of authentication and posture reports.

(p) Analyse network utilization pattern and problems, recommend and implement corrective and preventive measures;

(q) Recommend new or improved hardware, software, configurations, etc. to enhance the existing system performance and management;

(r) Assist the Customer to evaluate new hardware and software for implementation in the operating environment, when required by the Customer;

(s) Enforce physical access controls to the network room and the equipment, including escorting its own Sub-Vendors and the Customer-appointed Supplier, and maintaining proper management of keys and access logs at all times; and

(t) Provide standby and support service for network upgrades, network implementation or building maintenance activities such as testing and servicing of building power generators, Uninterruptible Power Supply (UPS), air-conditioning and fire suppression systems, which may affect the

operation of the equipment in the network rooms.

Requirement – Network Administration

Minimum Requirement:

(a) The network support engineer must be trained and minimally be proficient in the following areas:

· Network technologies and protocols;

· Network configuration;

· Network utilization and performance monitoring;

· Network fine-tuning, incident troubleshooting, interpretation of statistics and traffic pattern;

· Firewall rules configuration and security setting; and

· IDS/IPS, CDN implementation and IPv6;

· Familiar with Cisco and Alcatel and Palo Alto

(b) The network support engineer shall have at least three (3) years of hands-on experience in configuring routers/switches (e.g., Cisco and Alcatel), firewalls, and intrusion detection/protection systems.

(c) The network support engineer shall minimally have the Cisco Certified Network Engineer certification, or equivalent, and have experience in WAN implementation.

Network/Security

• L2 install/operate/troubleshoot (switches) - (Products – Cisco/HP/Juniper)
• Experience in STP, VSS, VLAN, PVLAN, Stack, POE,
• Plan for upgrade of firmware and other operational tasks
• Administration of Cisco ISE
• L3 install/operate/troubleshoot (Routers) - (Products – Cisco/HP/Juniper)
• Experience in routing protocols like BGP/OSPF/Static/EIGRP
• Operate and troubleshoot complex routing environment
• Install/operate/troubleshoot Wireless LAN controllers & AP’s.
• Firewalls ( Products – Checkpoint/ Cisco/Fortinet/Paloalto) – Paloalto/Cisco Firepower and Fortinet is a Must
• Install/operate/troubleshoot

Policy, routing, Security features, patches

Site-to-site IPsec VPN tunnels

Policy review and clean up

Sound knowledge in DMZ architecture.

SSLVPN(remote access) gateway (Juniper/Checkpoint)

• Install/operate/troubleshoot

Security (IPS/IDS)

• knowledge in IPS/IDS.

Monitoring (WUG/Cacti/Solarwinds/HP SAM)

• Sound knowledge and experience in managing/operating Solarwinds/WUG/Cacti
• Building dashboards in monitoring tools
• Running automated reports in monitoring tools

ITIL ( HP SM9/Servicenow)

• Experience in process management (HP SM9/Servicenow)
• Deep understanding of ITIL process.

Strong knowledge on Azure/AWS and any cloud based services

• Manage/Operate firewalls and vPC/vNET
• Troubleshoot Cloud hosted services connectivity issues

Co-ordinate with 3rd party vendors and may require to work after office hours.

Knowledge in SD-WAN/MPLS/MetroE

May require travelling within Singapore to the customer location and work from Customer location.

Strong documentation skills

Ability to learn and adapt new technologies quickly and able to work together as a team

Good time management and communication skills

Weekly on call Support.

Certification in Cisco/Checkpoint/Fortinet/AWS/Azure is an added advantage.

Qualifications – Minimum Bachelors in Info-communication technology or equivalent.

Experience – Minimum 7+ Years of Experience and 5 years working in an Enterprise or DC IT environment.

Skills and experiences required

· Able to do AUTOCAD

· MS Office at least to intermediate level

· Able to work independently with minimal supervision

· Able to work under tight deadlines and schedules

· Good technical and communication skills

· Able to converse in both English & preferably Mandarin as required to liaise with Mandarin speaking site workers, subcons/vendors

Duties & Responsibilities

· Coordinate piping design with other engineering disciplines

· Prepare piping layouts, general specifications and documents according to project standards.

· Analyze and interpret stress/vibration results, offering recommendations for piping system designs.

· Develop piping layouts for critical equipment like compressors and reactors, in 3D CAD if possible

· Review project documentation such as scope of work, schedules, and design basis.

· Assist in planning and organizing piping engineering activities, including manpower requirements and schedules, ensuring alignment with project scope and budget.

· Able to do material take-off (MTO) and ensure conformance with company design standards and compliance with project specifications, codes, and industry practices.

· Participate in inter-department coordination on all project-related issues

· Support field engineering during construction and advise on installation and testing.

· Conduct site visits

· Any other relevant tasks as assigned by Project Manager

Qualifications & Other requirements

· Diploma/Degree in relevant industry. Safety certifications an added advantage

· Min. 3-year working experience in a construction firm

· Ability to work well in high volume, fast-paced environment as a member of a collaborative team

· Singaporean or Singapore PR preferred

JOB DESCRIPTION

• To manage team of Engineers and provide them technical guidance.
• To perform engineering analysis and prepare calculations complying with Project Design Criteria, codes of practises and company standards.
• To supervise drafters in the production of engineering drawings in order to develop practical and economic designs.
• To participate in the preparation of all project design deliverables including layout drawings, detail drawings, schedules, specifications, data sheets, calculations requisitions, and technical tender evaluations, in accordance with the project requirements and the company procedures and standards.
• To ensure technical integrity of design deliverables.
• To ensure that all document checking and design verification tasks have been completed in accordance with the company and project procedures before formal document issue.
• To ensure conformance with customer requirement.
• To liaise with other consultants and to co-ordinate the discipline activities with the others to achieve the overall project design objectives in the most efficient manner.
• Attend meetings as and when required and prepare minutes of meeting.
• Resolve technical problems at site by liaising with PE directly.
• Prepare tender specifications and assist team to select competent vendor
• Manage site supervisors (RE/RTO)
• Support supervisors in the day-to-day execution of projects
• Undertake learning and development on a consistent and regular basis.

QUALIFICATIONS

• Graduate or post graduate degree in Civil & Structural Engineering from a reputed university. Degree recognised by PE Board will be an advantage.
• The applicant with Professional Engineer (PE) registered is added advantage for this application
• 5 to 8 years of experience with proven track record of successful delivery in infrastructural, building or industrial projects preferably in Singapore
• Conversant with Eurocode design.
• Knowledge of BIM modelling will be an advantage.
• Good interpersonal and communication skills.
• Good written and communication skills.
• Capable of working in multi-cultural environment.

handle drawings

allot jobs for project incharge

follow up with client

Responsibilities:

• To assist the Project Manager on project site work by focusing mainly on the aspects of construction, safety quality management, and project coordination of projects and maintenance works and to ensure smooth work progression and completion within target time and budget.
• Prepare method statements, design plans, and specifications.
• Liaise with the stakeholders (e.g. clients, authorities, consultants) on permits, drawings, and design matters.
• Develop projected milestone and operational plans for different phases of the project which includes scheduling, monitoring and reviewing of the work of others.
• Determine project requirements and estimate resources such as manpower, materials and equipment.
• Ensure that site works are executed accordingly based on approved detailed drawings, interpreted plans, and requirements of relevant authorities.
• Ensure project meets dateline/schedule, safety & quality standards of client’s requirements. Support contract administration and construction inspection by reviewing final plans, specifications, special conditions, and agreements.
• Other job duties as assigned.

Requirements:

• Candidate must possess at least a Professional Certificate/NiTEC, Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Civil), Engineering (Others), Engineering (Environmental/Health/Safety), or equivalent.
• At least 3 year(s) of working experience in the related field is required for this position.
• Specializing in Engineering - Civil/Construction/Structural or equivalent.
• Familiar with Civil, Archi & Steel Structural Works
• Experience in process plants handling both consultants with client will be added advantage

To support project manager and sales manager in adminstrative work

To help coordinate jobs

To help do quotations to customer

To help do service report for project manager

To help to reply email

To help sales manager to follow up on order and payment

Mon to Fri 8.30am - 5.30pm

Objectives of the position:

This role is for the validation of Customer technical requirements by means of inspection of In-coming goods and release lots in SAP with defined usage decisions. Testing of ISIR samples (type test) for product approval process (power, control & data cable) with compliance to company standards and verify compliance to the international cable standards e.g. EN / IEC requirements. Understanding of each testing standards and be able to communicate the requirements to respective parties including suppliers. Establish test specification to be followed by suppliers. To be able to operate all laboratory equipment in the process of cable type testing. Keep track of product approvals and Company's approved suppliers’ performance monitoring to ensure continuous product compliance to the intended specification. Corrective and preventive action process with supplier with CAR logging and follow-up for effective closure of complaints and issues related to product quality.

Knowledge in product testing and certification will be an added advantage.

Key Responsibilities:

1. Validate product quality conformance by conducting In-coming inspection and type testing for cable & accessories, include updating into SAP.

2. To be able to operate Laboratory test equipment for cable testing and accessories inspection

3. Understand international cable testing standards and inspection requirements with compliance to internal ISO procedures. Prepare test specification with detailed inspection requirement to be followed by the supplier.

4. Prepare and issue Customer test reports, certificates & COC

5. Track supplier quality by means of in-coming inspection or arise from Customer complaints. Update results in SAP system and release inspected lots according to the usage decision defined.

6. To generate supplier CAR and track for corrective action and effective closure of CARs by liaising with the supplier.

7. Liaising with relevant departments including suppliers to effectively close the CAR issued for Customer complaints or CAR’s which arise from internal findings (Z2 & Z8).

8. Maintain inspection records in SAP, determine skip lot and setup inspection requirements in SAP.

9. Assist Customer’s Technical enquiries e.g. Customer letter, RoHS, REACH & CE

10. Understand and comply with relevant ISO procedures, work instructions and corporate directives

11. Assist in other day to day activities related to QA department as assigned by superior.

12. Contribute to achieving company, department and personal KPIs through due diligence, duty of care & personal accountability for Quality assurance in all tasks.

Skills & Qualification:

▪ Min. Diploma or Degree in Engineering (Electronics / Electrical) or equivalent

▪ Min. 2 years’ experience in electrical / electronic product testing and qualification.

▪ Knowledge in ISO 9001:2015 QMS standard will be added advantage.

▪ To be able to operate lab equipment e.g. calliper, visual scope, resistance checker, High voltage tester etc.

▪ Prior experience in SAP system and knowledge of cable product testing is an added advantage

▪ Good written and communication skills

▪ Good customer handling skills and able to communicate to all levels in the organization

▪ Proficient in Microsoft Words and Excel

▪ Addresses present issues immediately and independently

▪ Possess self-confident and willing to share opinions and expertise in discussions

▪ Anticipate potential problems and takes action to avoid crisis

▪ Provide support to colleague in the Department and work as a team to achieve Department goals and targets

Authorities and Responsibilities

1. Ensure all fabrication work is done with acceptable quality by daily monitoring include inspecting according to specification, procedure and applicable standards.
2. Understand all technical specification and standard compliance and ability to handle troubleshooting project correction.
3. Prepare welding methods, PQR assembly and other CWI duties.
4. Co-ordinate, communicate with member even carrying out inspection of all the welding and associated actions in accordance with the approved Welding Procedure Specification, drawings and Company Specification and requirements.
5. Co-ordinate and liaise with Production personnel to ensure that all inspection stages comply to inspection and test plans on material or structure.
6. Witness and verify all tests include reinstatement etc. and prepare reports after such tests are conducted.
7. Verify product identification through material verification inspection and periodical random checks on site.
8. Responsible in executing directives as set forth for the Quality Assurance Department in meeting management objectives in term of quality control/assurance of all production fabrication works/projects.
9. Implement and maintain a system of auditing the facility and periodic calibration of test, measuring equipment and tools include all documentation, procedure qualification records accordance to customer specification and code.
10. Manage and supervise a team of inspectors / technicians in meeting departmental quality goals and production schedule.
11. Manage customer complaints, corrective and preventive action programs and Administer and manage continuous improvement program for all QA processes.
12. Work closely with customers, production and suppliers to meet the quality requirements.
13. Review / prepare, administer and implement Quality Assurance Plans, Inspection Test Plans and other Operational procedures in accordance to the technical specifications, customer's surveillance requirements, and good manufacturing / engineering practices, and enforce the same on Operations in their execution.
14. Work closely among inter-department to ensure committed schedules are met in a timely and effectively manner.
15. Manage the implementation / schedule of calibration control.
16. Participate in the implementation of risk assessment and risk control of medical devices.
17. Any other tasks and responsibilities assigned from time to time.

Competence Requirement

• Min. ITE-NTEC/Diploma/Degree level PE/ME or its related discipline.
• Fresh Degree or min 3 years in Quality Assurance in production/fabrication/welding environment or it relevant experience in QC/QA environment.
• Perform CMM programming, smart-scope and QC measuring tools/equipment.
• Certified with welding certification by American Welding Society, Certification Welding Inspector, AWS-CWI. - Optional
• Minimum 3 years of related experiences in welding capacity in structural fabrication.
• Able to interpret technical drawings and reading symbols.
• Understand the quality principles, standards, internal business systems and processes.
• Good interpersonal skills, ability to communicate and Works well with all levels of staff and technically competent.
• Good knowledge of International Codes and Standards (ASME, AWS, ASTM, API).
• Basic Knowledge and usage of Microsoft Office
• Sound Technical knowledge on steel structural and steel fabrication procedures and welding inspection.
• Basic knowledge of ISO 9001 and OHSAS 18001 Management system

Objectives of the position:

This role is for the Customer Quality Support for Company’s product distribution where Customer’s feedback & Product Quality requirements / issues are handled. The person will be responsible to handle Customers requirements such as complaints, test data & other technical information as requested. Customer complaints handling will also include the necessary communication with all the stake holders (Customer, Supplier, CS, PP, SVM, LOG). Knowledge in cable testing and specification requirements will be required to understand Customer complaints (technical & logistics).

Key Responsibilities:

1. Manage Customer complaint processes such as acknowledgement of the complaint, updating into SAP, keeping track of the complaint, closure of the complaint & summarizing for monthly reporting. Proper handling of customers’ needs by providing accurate and timely information on enquiries related to cable standards, test reports and handling of customer complaints.

2. Track supplier quality by means of in-coming inspection when required or arise from Customer complaints. Update results in SAP system and release inspected lots according to the usage decision defined. To generate supplier CAR and track for corrective action by liaising with the supplier.

3. Familiar with and comply to international cable testing standards and procedures. Contribute to achieving company & department KPIs through due diligence, duty of care & personal accountability for Quality assurance in all tasks.

4. Liaising with relevant departments to effectively close the Customer complaints

5. Maintain records in SAP

6. Operate Laboratory test equipment when required

7. Assist Customer’s Technical enquiries e.g Product Test Report, RoHS, REACH, CE

8. Supplier claim processes and 8D report.

9. Prepare and issue Customer Test Certificates & COC

10. Assist in other day to day activities related to QA department as assigned by Superior.

Skills & Qualification:

▪ Min. Diploma or Degree in Engineering (Electronics / Electrical) or equivalent

▪ Min. 2 years’ experience in electrical / electronic product testing and qualification. Training will be provided.

▪ Knowledge in ISO 9001 : 2015 QMS standard.

▪ Must be able to operate lab equipment (calliper, visual scope, resistance checker, High voltage tester).

▪ Prior experience in SAP system is required for this role. Knowledge of cable product testing is an added advantage.

▪ Good written and communication skills

▪ Good customer handling skills and able to communicate to all levels in the organization

▪ Proficient in Microsoft Words and Excel

▪ Addresses present issues immediately and independently

▪ Possess self-confident and willing to share opinions and expertise in discussions

▪ Anticipate potential problems and takes action to avoid crisis

▪ Provide support to colleague in the Department and work as a team to achieve Department goals and targets

Note: This role will require travel to China and Vietnam for approximately 10 months per year. Proficiency in Mandarin is essential for effective communication with Chinese-speaking clients and stakeholders.

Job Summary:

• We are seeking a talented Senior Design Quality Engineer (DQE) to lead quality initiatives for our thermal cooling solutions within the electronics and computing industry. The ideal candidate will be responsible for ensuring design and process quality while driving continuous improvements to achieve product excellence. If you are passionate about quality control, process optimization, and collaborating across functions, we encourage you to apply.

Key Responsibilities:

• Implement advanced monitoring systems to enhance product quality and yield. Identify areas for improvement and lead initiatives to optimize production processes.
• Take charge of addressing and improving abnormal quality issues in manufacturing processes. Collaborate with cross-functional teams to implement effective solutions and preventive measures.
• Strengthen internal quality control processes and improve overall capabilities, particularly in mechanical processes such as metal stamping, forging, brazing, die casting, CNC machining, and milling. Drive initiatives aimed at maximizing operational efficiency.
• Lead corrective actions for customer-reported quality issues and communicate preventive solutions to relevant stakeholders.
• Streamline quality inspection planning by integrating automation and advanced technologies whenever possible.
• Promote effective communication and coordination with design, production, and other teams to ensure adherence to quality standards.
• Manage task assignments, performance, and development of the quality team, ensuring timely completion of deliverables.

Requirements:

• Bachelor’s degree in Mechanical Engineering, Industrial Engineering, Quality Engineering, or a related field.
• Minimum of 5-7 years of experience in quality engineering, particularly in manufacturing and design quality.
• Proven experience in mechanical processes, including metal stamping, forging, brazing, die casting, CNC machining, milling, and knowledge of tooling and the design/manufacture of fixtures and jigs.
• Strong analytical, problem-solving, and leadership abilities.
• Familiarity with quality management systems and standards.
• Six Sigma certification or equivalent is a plus.
• Willingness to travel frequently and work abroad in China and Vietnam for a minimum of 10 months per year (includes four round-trip tickets to Singapore annually and separate arrangements for living accommodations).

Brandon Lim | EA Registration No: R21102894

EPS Consultants Pte Ltd| 95C5630

Note: This role will require travel to China and Vietnam for approximately 10 months per year. Proficiency in Mandarin is essential for effective communication with Chinese-speaking clients and stakeholders.

Job Summary:

• We are seeking an experienced Senior Supplier Quality Engineer (SQE) to lead quality and process optimization efforts across our supplier network, with a strong focus on mechanical processes (e.g., metal stamping, forging, brazing, die casting, CNC machining, and milling). The successful candidate will work within the electronics and computing sectors, particularly focusing on thermal cooling solutions, ensuring that our suppliers meet rigorous quality standards and process reliability. You will collaborate closely with suppliers to enhance product quality, optimize processes, and drive continuous improvement.

Key Responsibilities:

• Develop and implement systems to monitor and assess supplier quality. Ensure that materials and components, particularly those related to mechanical processes (e.g., metalworking, tooling, fixture and jig design), comply with specified standards. Address and resolve any non-conformance issues.
• Work closely with suppliers to optimize their manufacturing processes, such as metal stamping, forging, brazing, die casting, CNC machining, and milling. Drive improvements in process yield and consistency to ensure the high quality of materials and components.
• Lead the resolution of abnormal quality issues in collaboration with suppliers, focusing on root cause analysis and the implementation of corrective and preventive actions.
• Perform detailed audits to evaluate suppliers' quality management systems and process capabilities, particularly in mechanical and metalworking processes. Ensure adherence to relevant industry standards, and drive improvement actions based on audit findings.
• Work in partnership with suppliers to develop and enhance their quality processes and manufacturing practices. Ensure that their systems align with company standards, especially in the areas of tooling design and fixture/jig manufacturing.
• Collaborate with internal teams (design, production, procurement) to ensure clear communication of quality expectations and standards.
• Promote a culture of continuous improvement within the supplier network, focusing on enhancing quality management systems and manufacturing practices for metal-based components and mechanical parts.

Requirements:

• Bachelor’s degree in Engineering, Quality Assurance, or a related field.
• Minimum 5-7 years of relevant experience in supplier quality engineering or a similar role within the manufacturing or electronics industry.
• Proven experience with mechanical processes such as metal stamping, forging, brazing, die casting, CNC machining, and milling.
• Strong understanding of supplier quality management systems and industry standards.
• In-depth knowledge of metalworking, tooling design, and the manufacture of fixtures and jigs.
• Strong analytical, problem-solving, and negotiation skills.
• Experience with supplier audits, corrective actions, and continuous improvement processes.
• Six Sigma certification (or similar qualifications) is advantageous.
• Willingness to travel extensively (approximately 10 months per year) to China and Vietnam. Travel includes four round-trip tickets to Singapore annually, with separate living arrangements provided.

Brandon Lim | EA Registration No: R21102894

EPS Consultants Pte Ltd| 95C5630

Job Description

• Industry/ Organization Type: General Cleaning Services
• Position Title: Pest Control Technician
• Working Location: Islandwide
• Working Hours: Monday to Friday (9 am-6 pm), Saturday (9 am-1 pm)
• Salary Package: Basic $2,000 - $2,800 + Bonus + Allowance
• Duration: Permanent

Key Responsibilities

• Conduct inspections and identify infestation sources.
• Implement targeted treatment plans using safe and eco-friendly methods.
• Educate clients on pest prevention and maintenance strategies.
• Maintain accurate records of service visits and recommendations.
• Ensure compliance with safety regulations and company standards.

APPLY NOW!!!

• Ability to work independently and in a team
• Able to commit 5.5 days a week
• Must have a valid NEA Vector Control License
• Must have a valid Class 3 Driving License

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #69357 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Assurity Trusted Solutions (ATS) is a wholly owned subsidiary of the Government Technology Agency (GovTech). As a Trusted Partner over the last decade, ATS offers a comprehensive suite of products and services ranging from infrastructure and operational services, authentication services, governance and assurance services as well as managed processes. In a dynamic digital and cyber landscape, where trust & collaboration are key, ATS continues to drive mutually beneficial business outcomes through collaboration with GovTech, government agencies and commercial partners to mitigate cyber risks and bolster security postures.

We are looking for a Cloud Infrastructure Engineer (Migration Engineer) to join us!

• Work with Agency IT on the IT onboarding and enablement of Agencies' endpoint to the central architecture in a phased approach, ensuring a smooth transition for each agency.
• Work closely with Agency IT to whitelist network access for applications, including network configuration changes, connectivity testing, troubleshooting, and integration with SSO, to ensure seamless integration to the central architecture.
• Work with Agency IT on the device provisioning process using Windows Autopilot and coordinate the central provisioning of laptops, if applicable.
• Work with Agency IT to troubleshoot app packaging issues and ensure the compatibility and functionality of the applications on the new endpoint solution.

Requirements

• Comfortable with a 1.5-year direct contract
• At least 5 years of experience in the above domain areas
• Proven track record of large-scale ICT migration projects, particularly in the deployment of endpoint, end user services, or security solutions.
• Good understanding of endpoint management, endpoint security, and network solutions including Windows Autopilot, Microsoft Endpoint Manager, M365 services, Entra ID, SSE technologies, DNS, and network architecture.
• Experience in network troubleshooting for endpoints and applications.
• Candidate who can start work within short notice is preferred.

Join us and discover a meaningful and exciting career with Assurity Trusted Solutions!

The remuneration package will commensurate with your qualifications and experience.

We thank you for your interest and please note that only shortlisted candidates will be notified.

By submitting your application, you agree that your personal data may be collected, used and disclosed by Assurity Trusted Solutions Pte. Ltd. (ATS), GovTech and their service providers and agents in accordance with ATS's privacy statement which can be found at: https://www.assurity.sg/privacy.html or such other successor site.

Benefits

• A wholly-owned subsidiary of GovTech.
• We promote a learning culture and encourage you to grow and learn.
• A competency framework is in place to help you grow your career with us.

The job :

• Attend to customer quality issues.
• Improve manufacturing processes and products
• Provide quality services to ensure compliance with the quality system
• Achieve quality targets of products

Requirements :

• Diploma / Degree in Engineering
• No experience are welcomed
• Good interpersonal and communication skills
• Proficiency in spoken and written Chinese is required

Interested applicants, kindly click on “APPLY NOW” or send your resume in MS WORD format to hestia.wong(at)trustrecruit.com.sg

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).

Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd

EA License No: 19C9950

EA Personnel: Wong Ying Huan (Hestia)

EA Personnel Reg No: R24122431

Job Responsibilities

• Customer support for Domestic as well as regional
• To arrange service visiting, install, repair, troubleshooting, and re-location on site.
• To set up and dismantle equipment for demonstrations.
• To conduct equipment familiarization training for users.
• To answer service enquiries.
• To attend user’s meetings.
• To install and commission new equipment at customer’s sites.
• To practice and enlightenment for Customers satisfaction in service team.
• Service administration
• To prepare service quotations, contracts, report, and invoice.
• To arrange spare parts from suppliers.
• To send / deliver repair item and spare parts.
• To collect equipment for in house repairs.
• To deliver new equipment to customers.
• To attack and pursue outstanding debts.
• To send faulty parts to vendors for checking and testing.
• To furnish technical information and quality report to Principal

Qualifications and Criteria

• Min Diploma in science or Engineering
• Min 1 to 2 year of servicing exp in medical or lab devices

Lifescience MNC

Office hours Mon to Fri

Up to $3.3K (Basic)

Interested candidates, please forward your resume to [email protected]

Consultant: Huang Jingsheng Kevyn (R1333338)

Recruit Express Pte Ltd (99C4599)

About ByteDance

Founded in 2012, ByteDance's mission is to inspire creativity and enrich life. With a suite of more than a dozen products, including TikTok, Helo, and Resso, as well as platforms specific to the China market, including Toutiao, Douyin, and Xigua, ByteDance has made it easier and more fun for people to connect with, consume, and create content.

Why Join Us

At ByteDance, our people are humble, intelligent, compassionate and creative. We create to inspire - for you, for us, and for millions of users across all of our products. We lead with curiosity and aim for the highest, never shying away from taking calculated risks and embracing ambiguity as it comes. Here, the opportunities are limitless for those who dare to pursue bold ideas that exist just beyond the boundary of possibility. Join us and make impact happen with a career at ByteDance.

About the Team

ByteDance Networking brings together innovative ideas and technologies from network architecture, software-defined networking (SDN), network virtualisation, switch software and hardware co-design, and high-speed networking, to create hyperscale data-center networking solutions that power several of the most popular apps of the world such as Douyin and TikTok which serve hundreds of millions of users around the globe.ByteDance Networking is responsible for designing, building, and operating the global, intelligent network infrastructure to meet the requirements of high availability, scalability, and high-performance. By joining this team, you will gain marketable software development and/or network operation experiences in data center networking on a massive scale.

Responsibilities

• Deploy, configure and operate OTN solution in the cloud
  Automate Cloud OTN daily operations and optimize cloud architecture
• Participate in route-map setup and conduct PoC of new cloud OTN solutions.
• Improve Cloud OTN availability and efficiency
• Travel may be required up to 15% - 30% of the time.

Minimum Qualifications

• Bachelor's in Computer Science, Information Science, System Engineering or Science
• At least 5 years of working experience in the related field
• Knowledge on optical transportation, OTN solution, system design, architecture, service delivery and operation
• Hands on experience of major OTN devices, such as Ciena, Nokia, Infinera etc.

Preferred Qualifications

• Good troubleshooting skills, able to handle various OTN issues
• Self-motivated, good communication and written skills.
• Team player and participate Bytedance network global on call rotation.
• Network knowledge, such as TCP/IP, BGP is preferred

ByteDance is committed to creating an inclusive space where employees are valued for their skills, experiences, and unique perspectives. Our platform connects people from across the globe and so does our workplace. At ByteDance, our mission is to inspire creativity and enrich life. To achieve that goal, we are committed to celebrating our diverse voices and to creating an environment that reflects the many communities we reach. We are passionate about this and hope you are too.

2. SKILLS
SwitchesMASSIVETroubleshootingHardwareData CenterLevel DesignHigh AvailabilitySystem DesignNetwork ArchitectureNetworkingWritten SkillsRoutersVirtualisationBGPFirewalls

Our client is a well-established MNC, market leader in the Water Treatment industry. They are looking for a QC Coordinator Engineer assist their Engineering team for the next phrase of their business. They are located in South – easily accessible.

Responsibilities:

• Conduct quality control audits.
• Organize pre-inspection meetings with clients.
• Create Project Inspection and Testing Plans.
• Draft Project Inspection and Testing Procedures.
• Address client feedback on QC documents.
• Coordinate and schedule QC activities, including inspection notices and factory acceptance tests.
• Manage coordination and scheduling of QC procedures, reports, and documents.

Requirements:

• Minimum of Bachelor Degree in Engineering or Quality Management
• Minimum of 5 years experience in Quality Control function.
• Experience in the Oil and Gas or offshore and marine industry
• Proficiency in metal welding inspection and piping system testing and inspection

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R21101676 (Ng Zhi Qing Alethea)

Position: Sales Engineer

Working Day: Monday – Friday (8.30am – 5.30pm)

Working Location: Woodlands

Salary: $2300 - $3,000 + Mobile Claim + Transport Allowance (Cab-charge Card)

Requirements:

• Possessed Diploma in Engineering or any equivalent qualification
• Prefer at least 1 year working experience
• Technically incline with Sales Experience in Semiconductor Industry are preferred
• Willingness to travel oversea as required
• Training Provided

Responsibilities:

• Identify and create sales opportunity to penetrate new accounts for parts sales and main existing products
• Service corporate accounts and manage full sales cycles
• Follow up with customer enquiries
• Build strong and sustainable relationships with customer
• Any other ad hoc duties assigned

WhatsApp: +65 9642 0989 (Han)

Email: [email protected]

Chaw Chiaw Han, Reg No：R22106723

The Supreme HR Advisory Pte Ltd, EA No：14c7279

Marine Service Engineer

Office location : Boon Lay Way, Tradehub21
Working Location: On board ship

Working days: 5 days (Mon- Friday)

Working hours : 8am - 5pm

Salary : $2,000-$2,800 basic + OT + Allowances (Gross Salary $3,000 - $4,000)

Job Description

• Conduct periodic inspections, repair, service and maintenance of marine equipment to ensure reliable
  operation.
• Collaborate with clients and superintendents to deliver quality services efficiently.
• Generate reports and present findings to relevant personnel.
• Provide remote troubleshooting support through emails, ensuring customer issues are resolved promptly to maintain high satisfaction levels.
  

Requirements:

• Diploma in Engineering or equivalent (Electrical/Electronics/Mechanical/Mechatronics).