Responsibilities:

• Coordinate and Supervise project work on various site
• Manage project schedule efficiently
• Review M & E Drawings
• Follow up on drawing discrepancies
• Implement project planning, design, material requisition, cost control and documentation
• Ensure smooth progress of works on site and timely completion
• Liaise closely with clients, consultants, and suppliers on all project related matter

Requirements:

• ITE/Poly/Diploma/Degree in Electrical in any engineering field
• Prior experience in interior fit out works would be an added advantage
• Office proficient in (AutoCAD/Microsoft Office/Microsoft Project)
• Independent, resourceful, pro-active and team player
• Possess good organization, planning and project management skills
• Ability to work under tight deadlines

Responsibilities and Tasks:

You will work regularly with Micron’s Business Units to ensure solutions meet or exceed business requirements. You will be expected to suggest, promote, and leverage published standards to minimize environment complexity and ensure regulatory as well as license compliance. You will have the opportunity to travel to other Micron sites as well as technology conferences and trainings.

As part of your responsibilities, you will be required to:

• Supporting acquisition, installation, and administration of enterprise Data Storage & Backup environment.
• Solving, perform root cause analysis and identify data storage related problems
• Provisioning of data storage resources to servers and provide system security and access
• Providing data backup client installations & scheduling, backup policies setting, performance tuning, and fixing.
• Use management tools to analyze performance and identify bottlenecks or slowdowns and take appropriate action to resolve.
• Develop scripts to automate manual processes for operational improvement
• Planning, coordinating and upgrading components of the data storage as needed with software, hardware upgrades. Collaborating closely with vendors as needed in this process
• Provide engineering support for raised ServiceNow cases and drive closure within SLA.
• Upkeep service efficiency and end-user satisfaction levels through service SLA.
• Maintaining systems and update operational documentation to ensure that they are current.
• Provide regular and timely update of project status to the key business partners.
• Involving in projects to upkeep the computing environment to meet future demands.
• Participate in worldwide collaboration meetings to share on engineering efforts, technical challenges and breakthroughs
• Participate in 24/7 on-call rotation, major incidents and reviews (postmortems).
• Attend to level 2/3 user service requests and service restoration through ServiceNow (Incident Management)
• Work with vendors and team members to tackle issues related to the operations (Problem Management)
• Ensure assets are updated promptly in Asset Management system
• Ensure all changes to systems are recorded and accurately executed with approval (Organizational Change)
• Review the performance of systems and plan for lifecycle projects and future expansion (Capacity Management)
• Participate in Business Continuity Planning and DR strategy including detailing of DR procedures, and executing DR drills
• Maintain and review the DR documents on a periodic basis.

Requirements:
• Bachelor’s or Masters in Computer/ Electrical/Electronics Engineering/Computer Science/ Computing

ClearSK Healthcare Pte Ltd An international aesthetics clinic chain headquartered in Singapore, with presence in Shanghai, Hangzhou and now Kuala Lumper, is looking for suitable candidates for the above positions. In your role you will have opportunities to work alongside doctors, para-medical and finance professionals. For the motivated candidates, this is opportunity to earn high income but also a chance to learn and grow in your career.

To fit in with our culture of excellence, we look for only the F.I.T.: Fast, Innovative and Trainable as well as commitment, integrity and professional skills

Job Responsibilities:

· Report to Financial Controller who is a qualified CPA / Chartered Accountant

· Execute the company’s inventory policy

· Manage the company’s inventory system including stock profiles and locations

· Churning of necessary daily and weekly Inventory/Purchasing reports

· Ensure incoming goods are receipted and managed appropriately in Finance aspect

· Review historical data to build timely forecasts for assigned markets

· Responsible for planning periodic stock checks via audit work and stock takes

· Perform reconciliation or audit after physical counts and liaise with business units to rectify variance

· Monitor inventory stock -cards and systems to maintain safety stock level to avoid ‘’out-of-stock’’ situations

· Audit check on stock flow accuracy

· Timely update stock movement in physical stock-card and inventory system

· Check on supplier invoices

· Assist in other financial matters

Qualifications and Requirements:

• Minimum Bachelor's degree in Business, Analytics, Accounting, Finance, or a related field
• Good in planning and organizing work flow, with strong in numeracy, analytical and good interpersonal and communication skills
• Enjoy working in fast-paced and dynamic environment independently
• Diligent in checking work to ensure no errors before submitting to superiors for review
• A multi-tasker and learner with self-motivation and sensitive with figures
• Comfortable with computerized data processing and able to comprehend tables and spreadsheet templates
• Diligent in checking work to ensure no errors before submitting to superiors for review
• Familiarity with accounts payable processes and administration
• Exceptional attention to detail and commitment to accuracy

Application process:

Should you wish to be considered for shortlisting, please complete the attached Google Form at the link below prior to submitting your application on MyCareersFuture:

https://forms.gle/ZdnDCJYqZ916n8iQ7

Please be advised that only candidates who have completed the form and are subsequently shortlisted will be notified.

Mandatory Skills

Windows 2016 Server

Windows Server administration

Installing, configuring, and maintaining Windows Servers

Expert knowledge of Windows troubleshooting

Preferably certified in Microsoft Certified Systems Engineer (MCSE), Microsoft Certified Systems Administrator (MCSA), ITIL or equivalent.

Preferred Skills

Windows Server 2019, Red Hat Enterprise Linux (RHEL)

Internal Code: AI25003

*Internship period: January 2025 onwards (6 months internship period)

Activate Interactive Pte Ltd (“Activate”) is a leading technology consultancy headquartered in Singapore with a presence in Malaysia and Indonesia.

Our clients are empowered with quality, cost-effective, and impactful end-to-end application development, like mobile and web applications, and cloud technology that remove technology roadblocks and increase their business efficiency.

We believe in positively impacting the lives of people around us and the environment we live in through the use of technology. Hence, we are committed to providing a conducive environment for all employees to realise their full potential, who in turn have the opportunity to continuously drive innovation.

We have opportunities for you to grow your career path and are looking for talented professionals to join our team.

What will you do?

· Follows the instruction of test leads, test manager and/or project managers.

· Test newly developed and existing software, features, and record any bugs or performance issues.

· Assist in developing detailed, comprehensive, well-structured cases and review test result to determine system's functionality.

· Design, develop and execute manual test cases

· Design, develop and execute automation scripts using open source tools

· Manage and track to ensure proper closure of defects detected during testing

· Liaise with internal teams (e.g. developers and project lead) to communicate on bugs

We regret that only applicants with IT background (work experience/academic background) will be considered.

Requirements

· Positive mindset, and willing to learn new knowledge not taught in school.

· Strong background knowledge of programming languages such as Java, Python, JavaScript, Typescript.

· Meticulous eyes for detail

· Ability to work with minimal supervision

· Keen user of mobile applications

· Proficient in English (verbal and writing)

· Strong & effective interpersonal and communication skills, motivated, good attitude, responsible, proactive and an energetic team player will be a plus.

Activate Interactive Singapore is an equal opportunity employer. Employment decisions will be based on merit, qualifications and abilities. Activate Interactive Pte Ltd does not discriminate in employment opportunities or practices on the basis of race, colour, religion, sex, sexuality, national origin, age, disability, marital status or any other characteristics protected by law.

Protecting your privacy and the security of your data are longstanding top priorities for Activate Interactive Pte Ltd.

Your personal data will be processed for the purposes of managing Activate Interactive Pte Ltd’s recruitment related activities, which include setting up and conducting interviews and tests for applicants, evaluating and assessing the results, and as is otherwise needed in the recruitment and hiring processes.

Please consult our Privacy Notice (https://www.activate.sg/privacy-policy) to know more about how we collect, use, and transfer the personal data of our candidates. Here you can find how you can request for access, correction and/or withdrawal of your Personal Data.

Mon to Fri: 8:30am to 6pm

Position Summary

Oversees the Quality Assurance team in the development and administration of internal and external regulations, protocols, and policies as well as creates and maintains test data, performs testing, and report results to ensure consistency

Responsibilities

Primary Responsibilities

• Ensure ALL processes and procedures comply to Client’s Standards and GMP requirements.

• Able to lead and drive Quality Awareness in Warehouse/Production Assembly with plans.

• Able to lead and drive for Quality Improvement and Root Cause Investigation for NCR/Customer Complaints to improve KPI performance.

• Lead GMP & GDP Audits for Production Assembly and Warehouse.

• Provide Quality Trainings for new or existing employees.

Qualifications Summary

Experience:

• Experience in ISO9001/GMP system. Experience in GMP/GDP/ISO audits.

• Leadership, multitask and energetic to strive for improvement.

Education:

• Min Diploma (at least 1 yr working exp in Manufacturing) OR with similar working experience

Skills:

Technical Skill Requirements

• Conversant in English for interact with external customers

• PC literate at basic levels

Behavioral Skill Requirements

• Self-motivated and able to work under pressure

• Good team player

AEDAS is a leading global design practice dedicated to creative excellence and diversity in the built environment. We are a global platform for the most talented architects and designers, focused upon delivering locally-celebrated solutions for cities, communities and clients. Our global network of 12 offices forms a diverse staff base with skills across all sectors in architecture, interior design, building consultancy, master planning, landscape and urban design.

To support our continuous growth and expansion in Asia, AEDAS Singapore is seeking a committed candidate for the following position:

DOCUMENT CONTROL ASSISTANT / DOCUMENT CONTROLLER

Responsibilities:

· To take direction from Document Control Manager

· To be able to work as a proactive team member

· Management & filing of all Project documentation (Outgoing & Incoming)

· Preparation of Document Issue Packages to meet Project stage deliverables as defined by the Project Team Leader

· Checking that all documents meet defined AEDAS standards before being transmitted, and to highlight non-compliances to team members responsible. i.e. File name & drawing nomenclature compliance (Checked against any earlier revisions).

· Maintenance of Electronic PDF in project folders reflecting:

o AEDAS “Current“ Documents (Drawings, Specifications, Reports)

o “Current” Documents from all other Consultants

o “Current” Documents from Contractors as Submission Packages documents

· Downloading, Internal distribution and eventually filing of contractor submissions

· Uploading of commented documents via Workflow

· Assistance in preparation of and updating the distribution matrix as and when required, and advising all changes as appropriate

· Production of Reports to include but not limited to;

o Incoming & Outgoing reports on a weekly basis

o Tracking registers to record receipt & return of submittals

o To maintain & manage RFI tracking lists

o To highlight to team leaders any late items not yet responded

o Other reasonable tasks as required by Doc Control Manager & Team leaders

Requirements:

· Document Control Assistant - 1 year of working experiences in Electronic Document Management System (EDMS) environments, such as Aconex, Procore & BIM360 Documents

· Document Controller - 4 years of working experiences in Electronic Document Management System (EDMS) environments, such as Aconex, Procore & BIM360 Documents

· To fully engage with the usage of Electronic Document Management System (EDMS) and any other electronic document control systems pertinent to a project.

· Illustrate a positive, proactive attitude

· Logical approach to work with a consistent attention to detail

· A full understanding of AEDAS IMS and its supporting documents

· Ability to cope with conflicting demands, to be able to proactively highlight any conflicts of priorities and suggest action plans to resolve issues

Please submit a copy of your updated CV including your current salary, expected salary and notice period to [email protected].

- Permanent

- Up to $3800

- West area

- Monday – Friday: 8.45 am – 5.30 pm

Responsibilities:

• Organize and conduct regular credit & AR review meetings with BUs/sales departments to close out all delinquent accounts.
• Follow up and communicate with customers.
• Review and process new customer account applications.
• Maintain and update particulars and credit limits of customer accounts in SAP.
• Monitor daily sales transactions for credit hold in SAP and communicate with the sales department to address overdue issues.
• Disseminate or circulate invoices, statements of accounts, reminders, and confirmation letters.
• Perform customer account reconciliations and confirmations.
• Prepare regular collections and AR status reports for management and for HQ.
• Liaise with insurers and apply for trade credit insurance for customer accounts with credit terms.
• Liaise with banks in respect of bank guarantees including but not limited to letters of credit.
• Act as key AR and billing liaison person for the overseas shared service center.
• Check supporting documents to carry out billings to customers.
• Other adhoc duties assigned by Senior Financial Controller/ Assistant Manager.

Period:

• Permanent

Location:

• West area

Working Hours:

• Monday to Friday; 8.45 am – 5.30 pm

Salary:

• Up to $3800

Requirements:

• At least 2 years of relevant working experience.
• Proficient in MS software including Outlook, Word, Excel, and Powerpoint.
• SAP working experience is preferred but not necessary.
• Working experience with Letters of Credit is desired but not mandatory.
• Communicate with customers and insurers tactfully and professionally.
• Prioritize issues, and have a sense of urgency and ownership of tasks.
• Comfortable working closely with different departments simultaneously.

Interested applicants, kindly email your detailed resume (MS Word format is preferred):

[email protected] (Reg No:R1549023)

Please ensure that applications sent through email are no bigger than 1Mb.

We thank all applicants for your interest but regret to inform that only shortlisted candidates would be notified.

Success Resource Centre Pte Ltd (EA License Number: 04C3201)

3 Shenton Way, #19-01 Shenton House

Singapore 068805

T: 6337 3183 | F: 6337 0329 | W: www.successhrc.com.sg

Company's Profile
Julian Grey’s client is a global semiconductor equipment provider, specializing in inspection solutions for various industries. They have offices in APAC and are seeking motivated individuals to join their growing team.


Responsibilities:

• Offer technical support to field service engineers and customers as needed.
• Assess and define performance specifications for vision systems.
• Oversee customer-specific projects and associated documentation.
• Provide technical documentation and training as necessary.
• Contribute to product improvement initiatives.

Requirements:

• 1-3 years’ experience in Engineering discipline
• Vision/Optical Inspection system knowledge; semiconductor manufacturing experience

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Interested Applicants
Please WA Jian Wei @ 87389860
Shortlisted candidates will be notified

Quek Jian Wei
Reg No. R22110928
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

Job Responsibilities:

• Independently carry out Design Safety Philosophy, HSE Plan and specifications for fire protection systems (Active and passive), HFE, etc.
• Participate in Process Hazard reviews and analysis, including HAZOP/HAZID/SIL studies and be responsible for actions close-out
• Lead/Chair the HAZOP/HAZID/SIL workshops, if required
• Review third Party safety studies including FERA, Dispersion analysis, EERA, ESSA, Dropped objects study, QRA studies, etc. (not limited to)
• Capable of independently carrying out similar safety studies, as required
• Independently design active and passive fire protection systems and prepare Hazardous/H2S Area Classification documentation, safety and fire fighting layouts, escape route and lifesaving equipment layout, and other safety drawings
• Carry out safety critical elements performance standards, RAM, fire and gas detection mapping, etc., based on project requirements
• Act as Package Engineer for safety and firefighting equipment
• Manage and guide Junior/Senior Engineers and Designers on Concept/FEED/Detailed Engineering projects
• Provide health and environmental inputs (including health risk assessments such as chemical exposure, noise and lighting, Ergonomics/Human Factors Engineering, environmental impact assessments, etc.) to projects
• Interface/Coordinate with other engineering disciplines and clients, and take the lead in resolving technical matters related to safety aspects.
• Deliver project safety deliverables as per project schedule
• Provide inputs and support to projects in all safety aspects, including progress reports

Job Requirements:

• Bachelor’s Degree in Chemical Engineering or equivalent from an accredited university
• Minimum 22 years of relevant design engineering experience
• Good HSE Engineering experience in the oil and gas industry, in process safety/technical safety, with a minimum of 3-5 years in a Lead position on similar projects
• Involvement in design projects for offshore (FPSO/Platforms) and onshore (Refineries, LNG facilities, Storage terminals, etc.)
• Experience in a minimum number of offshore projects (FPSO/Platforms)
• Good knowledge of oil and gas process facilities, local and international process safety codes and standards, and regulatory/marine codes and standards (MODU, SOLAS, DNV/Lloyds Register)
• Hands-on experience in plot plan review, HAZID, HAZOP, SIL classification/verification, and other safety reviews (e.g., SIMOPS, ALARP)
• Good working knowledge of PIPENET Vision, Flaresim, and other consequence modeling software such as DNV PHAST, etc
• Ability to influence designs to achieve optimal HSE outcomes
• A team player with leadership potential and proactive inter-discipline communication skills

Job Responsibilities:

• Carry out design safety philosophy, HSE Plan, and specifications for fire protection systems (active and passive), HFE, etc
• Participate in process hazard reviews and analysis, including HAZOP/HAZID/SIL studies, and be responsible for action close-outs
• Review third party safety studies, including FERA, dispersion analysis, EERA, ESSA, dropped objects study, QRA studies, etc. (not limited to)
• Independently carry out similar safety studies, if required
• Independently design active and passive fire protection systems and prepare Hazardous/H2S Area Classification documentation, safety and fire fighting layouts, escape route and lifesaving equipment layout, and other safety drawings
• Carry out safety critical elements performance standards, RAM, fire and gas detection mapping, etc., based on project requirements
• Act as Package Engineer for safety and fire fighting, life saving equipment
• Manage and guide team Engineers and Designers
• Provide health and environmental inputs (including health risk assessments such as chemical exposure, noise and lighting, ergonomics/Human Factors Engineering, environmental impact assessments, etc.) to projects
• Interface/coordinate with other engineering disciplines and clients, and take the lead in resolving technical matters related to safety aspects
• Deliver project safety deliverables as per the project schedule.
• Provide inputs and support to projects in all safety aspects, including progress reports

Job Requirements:

• Bachelor’s Degree in Chemical Engineering or equivalent from an accredited university
• Minimum 12 years of HSE engineering experience in the Oil and Gas industry, in process safety/technical safety, and preferably worked 1-3 years in a Lead position on similar projects
• Involved in design projects for offshore (FPSO/Platforms) and onshore (Refineries, LNG facilities, Storage terminals, etc.)
• Experience in a minimum number of offshore projects (FPSO/Platforms)
• Good knowledge of Oil and Gas process facilities, local and international Process Safety codes and standards (e.g., NFPA, EI15, etc.) and regulatory/marine codes and standards (MODU, SOLAS, DNV/ABS/Lloyds Register)
• Hands-on experience in plot plan review, HAZID, HAZOP, SIL classification/verification, and other safety reviews (e.g., SIMOPS, ALARP)
• Good working knowledge of PIPENET Vision, Flaresim, and other consequence modeling software such as DNV PHAST, etc
• Ability to influence designs to achieve optimal HSE outcomes
• A team player with leadership potential and proactive inter-discipline communication skills

• Technical Expertise:
  Provide in-depth technical support and expertise on semiconductor products, applications, and technologies.
• Customer Engagement:
  Build and maintain strong relationships with customers, understanding their requirements and providing appropriate solutions.
• Sales Support:
  Collaborate with the sales team to develop and execute sales strategies, including product demonstrations and presentations.
• Market Analysis:
  Conduct market research to identify potential clients and assess competitive landscape.
• Proposal Development:
  Prepare and present technical proposals, quotations, and contracts to clients.

Elsa Fontanne (CEI No. R24124496)

Recruitment Consultant

Contact Number: 67860100

Email Address: [email protected]

Recruit Express Pte Ltd / EA Licence No: 99C4599

We regret only shortlisted candidates will be contacted

Roles & Responsibilities:

. Monitor progress, quality of workmanship and compliance with authority requirements.

. Highlight and advise the project staff on the interfacing of M&E services and the building works

. Coordination with multiple parties not limiting to design consultants / engineers, clients’ project representatives, statutory / authority agencies etc. for the establishment of the design deliverables requirements for submission

. Review design deliverables together with the design consultants / engineers and ensure that it is in order for submission

· Able to understand and has a good knowledge in electronics (e.g. Electronic Circuit Diagram)

· Able to read and draw floor plans and schematic diagrams using AutoCAD

· Able to communicate well in written and verbal communications

· Able to work independently and adapt to a dynamic working environment quickly

· Participate in product requirements definitions

· Develop hardware requirement and specification documentations

· Participate in test strategy development, methodology, test plans and cases

· Design and integrate power electronics and motor control system

. Motivated, responsible with positive attitude and able to work under pressure and stress.

. Successful candidate able to work after office hours depend on site/project schedule

· Knowledge in electrical termination and troubleshooting is an advantage

· Knowledge of computer skills and software such as Microsoft (Excel, Word, PowerPoint)

· Able to work under pressure to meet project deadlines and multiple accounts/projects.

· Proficient in writing daily reports

· Perform project coordination, system installation, termination, testing & commissioning

. Leading Testing and Commissioning of project team and conduct training to customers after completion of project.

. Provide technical support to customers and site project team in the selection of equipment for the project.

. Support in acquiring new opportunities – Tenders and Business Development.

. Performs other duties as assigned.

· Perform user operation training of the system installed

· Organized, fast learner, proactive, able to multi-task and with positive attitude

. Support internal for spare parts warranty, preparation, and assembly.
. Improve on site report and process.

. Excellent problem-solving skills, attention to detail, and the ability to work in a fast-paced startup environment.

. Strong experience with PCB design, layout, and simulation tools (e.g. Eagle, Autocad).

· Perform field service to troubleshoot and rectify system fault

· Required to carry out standby duty for servicing and answering calls

· Attend site coordination meeting and site walk

. Able to coordinate with contractors and consultants for engineering issues and drawing plans.

. Perform all duties in accordance with company policies, processes, systems and procedures.

Job Description

You will be part of the mechanical team in Engineering, reporting to Mechanical Engineering Manager. You will use 3D CAD tool to design plastic and metal parts for electronic boxes. You will work on conduct rapid prototyping and rapid testing to validate design requirements You will perform design trouble shootings and design solution implementations.

You will support parts fabrication, product assembly and production processes. We would have you work on technical drawings, design reports, test plans and technical documentations. We would work with Quality team to ensure product quality and reliability

Your Responsibilities:

• ability to evaluate stress and strain for plastic and metal designs
• experience in and understanding of various 3D printing technologies and other rapid prototyping techniques
• ability to design mechanical tests for design verifications
• understanding of plastic molding and metal fabrication processes
• ability to design parts that facilitate product assembly and production processes
• Understand the design of electromechanical connectors
• Experience providing design solutioning to prevent product being damaged by thermal and mechanical shock and vibration

The Essentials - You Will Have:

• Degree/Master in Mechanical or Mechatronic Engineering
• You have min 3 or more years of experience in mechanical design of plastic and metal parts, for electronic boxes, in electronic product industry

The Preferred - You Might Also Have:

• Candidate with the following skills will be preferred:ability to conduct computer modeling and simulation, using Ansys, during product design
  ability to instrument product and conduct shock and vibration tests on a shaker table
  You have skills to perform troubleshooting and solutioning.
  

What We Offer:

• Health Insurance including comprehensive In-patient coverage along with Top-up plans for voluntary coverage upgrade.
• Out-Patient benefits including clinical consultation, prescribed medication, telemedicine, health screening, dental & vision.
• Life and Accident Protection – covering death and disability due to natural cause, illness, and accident.
• Hybrid & Remote flexible work options.

At Rockwell Automation we are dedicated to building a diverse, inclusive and authentic workplace, so if you're excited about this role but your experience doesn't align perfectly with every qualification in the job description, we encourage you to apply anyway. You may be just you or other roles.

#LI-Hybrid

Developing Engineering Strategies.

• Implementing Engineering Strategies.

• Conducting Project Safety Briefing.

• Controlling Materials Order and Usage.

• Supervising your Construction Team.

• Increasing our Company's work quantity.

• Improving our Company's work quality.

• Reporting to the Director and ad-hoc duties.

Job Description:

• Inspection of project sites
• Coordinate, manage, and supervise all the instrument installation and monitoring works
• Liaise and coordinate with contractor for installation and monitoring issues
• Attending site progress meetings, preparing meeting minutes and coordinating with clients
• Process and interpret monitoring readings
• Coordinate with construction team to minimise obstruction and damage to the monitoring instruments
• Supervise and quality control in instrumentation works
• Other ad hoc duties as assigned

Requirements

• Relevant education background in Civil Engineering / Geotechnical / Geology
• Min 3 years of working experience in instrumentation and monitoring works
• Experience in LTA projects
• Senior position will be considered with relevant experience
• Only Singaporeans

You may send your resume / CV to email address directly: [email protected]

Job Descriptions:

• Assist in maintaining and updating all the Quality Management System (QMS) Documentation
• Support the maintenance and improvement of Quality Management System
• Assist in monitoring the progress or implementation and effectiveness of Quality Management System (QMS) for relevant standards such as:

a) ISO/IEC 17020: 2012 – Inspection Body

b) ISO/IEC 17025: 2017 – Laboratory

c) ISO/IEC 17065: 2012 – Product Certification

• Assist with training in quality awareness
• Assist in keeping track of relevant quality standards, and ensure compliance and preparedness for External Audit
• Assist QA/QC Manager with Internal and External Audit
• Perform any ad-hoc duties as and when assigned

Requirements:

• Posses at least Diploma in Civil Engineering or equivalent
• Knowledge and proficiency in Microsoft Office
• Exceptional attention to detail
• Good oral and written communication skills
• Great team player and able to work efficiently with minimal supervision
• Only Singaporeans

You may send your resume / CV to email address directly: [email protected]

Responsibilities:

• Design, develop, and maintain automated test scripts using Selenium WebDriver for web-based applications.
• Perform API testing using Postman and automate API test cases.
• Manage and track test cases, test execution, and defect management using HP ALM.
• Participate in creating detailed, comprehensive, and well-structured test plans and test cases.
• Identify, log, and manage bugs and defects. Ensure issues are resolved promptly by working closely with development teams.
• Integrate automated tests with CI/CD pipelines to ensure continuous quality assurance.
• Assist in performance and security testing as required.
• Work closely with cross-functional teams including developers, product managers, and other QA engineers to understand requirements and design appropriate test automation strategies.

Requirements:

• Bachelor’s degree in Computer Science, Information Technology, or a related field.
• Extensive hands-on experience in automation testing using Selenium (Java, Python, or other relevant languages).
• Proficiency in writing and executing API test cases using Postman.
• Experience with HP ALM for test management, defect tracking, and reporting.
• Knowledge of automation frameworks such as TestNG, JUnit, or Cucumber.
• Solid understanding of one or more programming languages like Java, Python, or C#.
• Experience with Git or similar version control systems.
• Familiarity with continuous integration tools such as Jenkins or Bamboo.
• Experience working in an Agile/Scrum environment.
• Strong verbal and written communication skills to articulate complex concepts effectively.
• Experience with mobile automation tools like Appium.
• Experience with performance testing tools like JMeter or LoadRunner.
• ISTQB or other relevant certifications.
• Familiarity with cloud environments like AWS or Azure.

Disclaimer: The company is committed to ensuring the privacy and security of your information. By submitting this form, you consent to the collection, processing, and retention of the information you provide. The data collected (which may include your contact details, educational background, work experience and skills) will be used solely for the purpose of evaluating your qualifications for the position you're applying for. Your data will be stored securely and retained for the duration necessary to fulfill our hiring process. If you are not selected for the position, your data will be kept on file for a limited period in case future opportunities arise. You have the right to access, correct, or delete your data at any time by contacting us at Quess Singapore | A Leading Staffing Services Provider in Singapore (quesscorp.sg)

We are looking for a Generative AI Innovation engineer/ Technologist with keen interest in nation-wide initiatives.

• Be a part of the innovation team from a leading industry of Singapore's GDP.
• Attractive Remuneration Package.
• Hybrid work arrangement.

Responsibilities:

• Be the expert on the latest advancements in GenAI and apply such knowledge to shape organization’s strategy for GenAI.
• Scope GenAI projects based on problem statements from internal and/or external stakeholders, ideally through an application of design thinking practices.
• Deploy Python-based AI/ML frameworks, specifically PyTorch, TensorFlow and scikit-learn, and latest frameworks/tools for GenAI such as Langchain for POCs developed.
• Develop and maintain clear and concise documentation of GenAI models, processes, and results.
• Optimise model performance through experimentation, hyperparameter tuning, and advanced optimisation techniques.

Requirements:

• Degree in Computer Science or equivalent.
• Experienced in developing AI/ML solutions in a corporate or research setting, deployed solutions into production.
• Strong programming skills in Python/Java/Javascript and full stack development.
• Aptitude for data story-telling, visualisation and technical communications. Able to abstract and convey technical concepts to non-technical audiences well.
• Team player with a keen interest in mentoring and collaborative problem-solving.

Interested candidates may click on apply or apply via email to [email protected] (indicating Job ID J49425 for faster processing).

By submitting your resume, you consent to the collection, use, and disclosure of your personal information per ScienTec’s Privacy Policy (scientecconsulting.com/privacy-policy).

This authorizes us to:

• Contact you about potential opportunities.
• Delete personal data not required at this application stage.
• To withdraw consent, email [email protected].

All applications will be processed with strict confidence. Only shortlisted candidates will be contacted.

Lee Wen Ying (Mattias) - R23112909

ScienTec Consulting Pte Ltd - 11C5781

ABOUT AMS

We’re inventing the future, right here, right now, at Thales. We design the critical security solutions of tomorrow by combining the curiosity to explore, the intelligence to question and the vision to create. Together we solve complicated problems by combining our experience in the market with our leading research and development capabilities.

Be part of revolutionising our skies for the future of aerospace. A future where all modes of aircrafts piloted or unpiloted, civilian or military move around our skies safer, more efficiently and sustainably for a greener and more harmonised airspace.

ROLE DESCRIPTION SUMMARY

The Senior Network Engineer is responsible for the provision of network integration activities for the respective project and/or bid activity. The Engineer is a key member of the Hardware Deployment & Integration team that provides:

• Technical and resource supervisory input to Network Integration and Deployment engineering activities

• Skilled input to the Network Integration and Deployment activities within the respective project engineering segment, and

• Assistance to the Integration Group for bid response activities.

KEY ACTIVITIES AND RESPONSIBILITIES

As a Sr. Network Engineer, you are accountable for:

For Projects:

· Revise solution architecture drawings and diagrams, cost templates (devis), the List of Supply (LOS) / Bill of Materials (BOM), and interfaces at the start of the project.

· Create and/or update network integration engineer contributions to the Solution Specification and Design documentation, Network Acceptance Test Procedures, and other associated network integration documents.

· Define equipment configuration for the ATM solution(s) and coordinate with Hardware Deployment and Integration management for assembly of the ATM system and interface with Tools Engineering, Customer Service and Site Services departments where necessary to accomplish this task.

· Load, configure, validate, and hand over equipment to Software Integration in the factory and on customer sites.

· Support configuration changes to system platforms in factory and customer sites.

· Attend Design Reviews with customers.

· Provide customer training.

· Identify risks at solution architecture level and propose where possible alternate validated solutions.

· Provide system and networking expertise useful in the design.

· Follow and contribute to the development and enhancement of engineering processes

· For Bids / Tenders:

· Creation and Peer Review system architecture diagrams.

· Creation of the List of Supply (LOS) / Bill of Materials (BOM)

· Creation of Hardware Integration section in the Engineering Department devis.

· Definition of system interfaces.

KEY KNOWLEDGE AND EXPERIENCE

To be successful in your role, you will have demonstrated and/or acquired the following knowledge and experience:

Qualifications

Relevant bachelor’s degree or Master Degree

Technical skills

§ Must-have

ü Cisco formal certifications (CCNP, CCNA etc)

ü Good level of knowledge of, and experience with Unix/Linux (Redhat distribution preferred) Operating System

ü Familiarity with a wide range of Computer and Networking hardware (preferably Cisco)

ü Scripting (TCL/TK, Perl, & Shell)

ü Able to work on multiple activities con-currently and effectively self-manage (autonomy)

§ Nice-to-have

ü Work experience in a mission-critical, near real-time environment preferably ATC-related

ü Experience in large and distributed networked computer systems

Interpersonal skills

ü Sense of ownership

ü Team player

ü Verbal and non-verbal communication,

ü Listening skills,

ü Problem solving,

ü Decision-making,

ü assertiveness,

ü patience,

ü empathy

Morgan McKinley is seeking a Full Stack Engineer (Python) for a 12 month contract assignment with a possibility to extend or to go perm!

Responsibilities

• Design & Development: Create robust, scalable application programs and interfaces.
• Problem Solving: Devise procedures to tackle complex challenges, considering infrastructure capabilities and desired outcomes.
• Documentation: Enhance technical documentation for tools and solutions.
• Optimization: Evaluate enhancement requests and identify opportunities to streamline solutions.

Skills & Qualifications

• Candidates must possess a Bachelor's degree in Computer Science
• 5+ years of hands-on experience in software development.
• Python (3.x): Your expertise in Python will drive our backend development.
• Frontend Stack: Familiarity with frontend technologies is essential.
• Communication & Independence: Strong verbal and written skills, ability to work independently, and manage time effectively.
• Troubleshooting: Resolve issues promptly and make necessary system changes.

Interested candidates may apply through the application system or send it to [email protected]. Shortlisted candidates will be notified.

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to Morgan Mckinley Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.morganmckinley.com/sg/privacy-policy. You acknowledge that you have read, understood, and agree with the Privacy Policy.

Morgan McKinley Pte Ltd
Koh Boon Sien
EA Licence No: 11C5502
EA Registration No. R1110345

• Planning / Assign sub-contractors and manpower for the maintenance work and from project handover
• Supervising & Managing of Sub-contractor to carry maintenance & servicing works
• Plan and schedule Preventive Maintenance
• Perform routine check, system back-ups & restoration, troubleshooting and upgrading / improvement of system to ensure optimal functioning of BMS//DCS//PLC//SCADA System
• Record servicing & maintenance data and generate service report
• Provide Technical / Operational guidance, engineering solution to the Maintenance Site Facility Management

Mon to Fri: 9am to 5:30pm

Objective:

We are looking for a Field Application Engineer to drive new projects and business pipelines for FY24 growth.

Responsibilities:

• Responsible for pre & post sales requirements of Company’s Power Quality products (preparing technical documents & commercial proposals)

• Provides technical support to distributors and key account customer for troubleshooting, on-site testing and commissioning

• Provides trainings to distributors and customers to enhance their capabilities

• Responsible for design-in (spec-in) of company’s products with the distributor in the appointed territory and market segments, achieve yearly design-in targets

• Lookout for opportunities to cross out competitor part

• Coordinate PQ Application and On-site Measurement Services in line with the company strategy

• Maintains good relationship with both end-users, local distributors, external test laboratories and build customer loyalty through field visits

• Maintenance of existing customers base and achieve development of new potential customers.

• Effective use of CRM/CAS system to record key activities, including customer visit/call reports and opportunities

• Able to communicate and work well with internal departments.

• Any other responsibilities as assigned by the Strategic Account Manager or/and Sales Manager

Job Requirements:

• Possess fundamental PQ Harmonic knowledge and application.

• Basic knowledge of EMC / EMI compliance is a plus

• Bachelor’s degree or equivalent in Electrical/Electronics/Mechatronics Engineering or other relevant majors

• Prefer minimum 3 years technical experience in the field of industrial products

• Able to operate common test equipment like voltage meter, clamp meter, oscilloscope, analyzer, etc.

• Good interpersonal and communication skills

• Well-versed in basic MS Office tools (eg. Word, Excel) and SAP (preferred)

• Interpersonal savvy

• Good follow up and consultative approach attitude

• Able to work independently and resourceful

What we offer:

• Attractive remuneration and incentive package

• Annual leave, medical welfare and insurance

• Provide opportunities for career advancement within the company

Job Responsibilities:

Gather software requirements and design solutions for modules and small software systems

Develop and support software including applications, database integration, interfaces and new functionality enhancements.

Coordinate cross-functionally to ensure projects meet business objectives and compliance standards.

Write both internal and external technical documentation

Deploy, install, and configure hardware and software systems

Work with team members in customer support, field test and deployment

Perform bug fixing and improvement of current application framework

Requirements:

Bachelor Degree in Computer Science & Engineering, Electrical & Electronics Engineering, Information Technology, or equivalent

2-4 years of in-depth knowledge and experience in front-end and backend development

Ability to solve complex development problems and produce high-quality code while pushing the technical boundaries.

Proficiency in one or more programming languages; we use Python, Javascript and TypeScript.

Knowledge in frontend frameworks such as React, Next.JS, FastAPI, REST API or similar frameworks.

Experience with Docker/Kubernetes, DevOps, CI/CD, Github

Experience with Linux operating system (Ubuntu, RHEL, etc.)

Experience working on Agile projects and Agile methodology in general

Excellent problem solving, communications, and teamwork skills

Civil Engineer (Civil Construction)

(LTA project experience required)

5.5 days work day at East area

Primary Roles

• Plan, prioritize and manage assigned projects, involved in the areas of pre-planning, budgeting, resources allocation, contract negotiation, drawings submission, progress claim, and worker coordination, to ensure that the team’s resources are used effectively and project deadlines are met.
• Supervise construction site personnel and subcontractors, client & consultant, attend weekly project progress meetings, and monitor compliance with building and safety codes and regulations.
• Ensuring the timely, budget control, and cost-effective completion of construction projects.

Key activities

Project Planning

Responsible for creating a comprehensive project plan that outlines the project's objectives, scope, deliverables, timeline, and resource requirements. They collaborate with stakeholders to define project goals and develop a roadmap for project execution.

Risk Management

Identify potential risks and develop strategies to mitigate them. Conduct risk assessments, create risk management plans, and implement risk response strategies to minimize the impact of risks on project outcomes.

Schedule Management

Develop project schedules, defining tasks, dependencies, and timelines. Monitor progress, track milestones, and identify any deviations from the planned schedule. If necessary, adjust keep the project on track.

Quality Assurance

Ensure that project deliverables meet the required quality standards. Define quality criteria, establish quality control processes, and conduct regular inspections and reviews to monitor and improve the project's quality.

Reporting and Documentation

Responsible for generating regular progress reports and status updates for stakeholders. Document project activities, decisions, and outcomes to create a comprehensive project record.

Stakeholder Management

Identify project stakeholders and establish effective communication channels with them. Engage stakeholders throughout the project, manage their expectations, and address any concerns or issues that may arise.

Change Management

Handle changes that occur during the project lifecycle. Assess change requests, evaluate their impact on the project's scope, timeline, and budget, and implement appropriate change management procedures.

Continuous Improvement

Evaluate project performance and conduct lessons learned sessions to identify areas for improvement. Use feedback and insights gained from completed projects to enhance project management processes and practices within the organization.

Requirements:

Minimum a Bachelor's Degree in Civil Engineering with PE Board recognized

Minimum 3 years construction experiences in Singapore especially in Civil & Infrastructure works

Knowledge in project management methodologies

Good organization & Time Management

Strong Analytical & problem-solving abilities

Adaptability and Flexibility