Responsibilities:

• To assist to liaise and co-ordinate with LTA, authorities, Consultants and stakeholders.
• To ensure risk assessment and safe working procedure are properly executed on site.
• To conduct daily health, safety and environmental inspections, prepare reports and follow up with Project Safety Team.
• Ensure compliance with environmental regulations, develop environmental control plan & liaise with NEA (such as report submission, etc.).
• Proper documentation of all EHS records, certificates, notice and official related EHS correspondence.

Requirement:

• At least 5 years relevant experience in construction for LTA projects.
• NEA registered ECO.
• Able to work independently with minimal supervision.
• Able to ensure compliance with the latest environmental regulations.

Job Responsibilities:

• Inspect and identify all possible forms of hazards in a work environment.
• Inspect work areas regularly to ensure compliance with workplace safety and health requirements.
• Check equipment to ensure it is in working condition and do not pose any environment health hazard to user or the workplace.
• Provide solutions to address any unsafe practices or act at workplace.
• Conduct risk assessments on work site.
• Prepare reports on workplace safety assessments.
• Take charge of all matters related to environmental health such as:

1. Disease-bearing insects and rodents

2. Proper disposal of construction waste

3. Noise, air and dust pollution

4. Earth littering

5. Siltation of drains

6. Food hygiene in workers canteens if any

7. Any other environmental health matters

• Report these conditions/ situations with recommendations on remedial measures to be taken to prevent recurrence

Requirement

• Diploma in any field.
• Registered Environmental Control Officer with NEA.
• At least 2 years of working experience.
• Preferably personnel specialized in Building Construction - Environmental/Health/Safety or equivalent.
• Candidate who possess high experience will be considered for senior role.

• Work closely with the project manager and administer the design control system and programming to meet budget and timeline expectations of the project.
• Responsible of modifying controls, designs, and other documents in accordance with processes and standards and in line with industry standards as per the customer's URS.
• Assist and participate in internal the purchase, FAT and SAT, test and debug, controls and validation operations.

Requirements:

• Diploma in engineering or equivalent
• At least 3 years of relevant work experience in control systems design.
• Knowledgeable in Allen Bradley and Siemens-S7 programming

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R24120303

Job Description

• Provides support on quality systems, processes, and procedures to ensure compliance with FM Contract, Company’s, and ISO policies.
• Responsible for preparing and conducting quality control checks, investigations for potential quality non-conformance, compliance concerns and recommend follow-up actions to mitigate such issues on Building Facilities including M&E Systems, Building Systems and soft services.
• Prepare report for management review and facilitate for follow-up actions required.
• Attend regular maintenance meetings on behalf of the Company with Clients and Clients’ Representatives.
• Lead the internal audit program for operation site include identifying opportunities for quality systems’ improvements and meet company’s quality objectives.
• Maintain good records and filing systems of reports for future reference and coordination

Job Requirement

• At least 3-5 years relevant working experience in Engineering, Facilities or Estates Management, Quality Management Systems, Quality Control or equivalent.
• Minimally Diploma in any Engineering field, Facilities or Estates Management or equivalent with knowledge in ISO Standards 9001, 14001 and/or 41001.
• Certified QMS Auditor / Lead Auditor in ISO or equivalent will be advantageous.
• Pro-active, independent yet service and team-oriented, and able to perform under pressure with minimal supervision.
• Strong interpersonal and communication skills with ability to work cross-functionally with different departments to meet timeline and objectives.
• Location is at Singapore Polytechnic
• 5.5 work day

The Service Quality Associate (SQA)act as the media between internal partners and residents as well as their families. The SQA is to maintain high standards of care and service delivery, promoting residents’ well-being, and ensuring a conducive living environment for residents, through gathering feedback and working with internal partners.

Work Location: Senja Care Home

Client Care Management

• Act as the point of contact to interact and gather feedback from residents and their families to understand their needs and preferences.
• Work towards resolving issues and ensuring a positive outcome for all parties involved.
• Collaborate with internal partners within the care home to ensure a cohesive and collaborative approach to resident care and service delivery.
• Identify and share areas of improvement and provide recommendations.

Training and Activity Management

• Coordinate and deliver in-service talks to residents and staff.
• Encourage residents to participate in activities and events for their health well-beings.

Service Quality

• Monitor and evaluate the quality of care provided to residents by conducting regular assessments, audits and surveys.
• Identify areas for improvement and recommend strategies to enhance the quality of services.
• Implement initiatives to enhance resident satisfaction and improve the overall resident experience.
• Prepare reports for management and regulatory agencies as required.
• Ensure that the care home complies with all relevant regulations, policies, and procedures. Stay abreast with industry standards and best practices to maintain compliance.
• Escalate to HOD or Senior Management Team (SMT) for feedback that warrants immediate attention or has insinuation of escalation to public forum or media.
• Track all visits, feedback, recommendations and report at Vanguard Rehab and Clinical Meeting (VRCM) platform or any other platforms when necessary or required.

Administration

• Maintain accurate records of quality assurance activities, resident feedback, and compliance measures.

Requirements

• Diploma / GCE “A” level / GCE “O” level / GCE “N” level in a relevant discipline
• Possess at least 1 - 2 years working experience in Service Quality function or quality improvement programmes in healthcare or similar setup.
• Those with experience in Nursing Homes and/or long-Term Care Facility would be preferred.
• Ability to interact in at least 2 of the languages/dialects such as Malay, Mandarin or Tamil to communicate with the clients and families.
• Effective interpersonal, engagement and follow-up skills
• Detail-oriented
• Passion for quality and ageing issues
• Good written and verbal communication skills

Responsibilities & Requirements:

The successful candidate for this role is expected to have a strong background in Regression and end-to-end Testing, with a deep understanding of JSON, API, and SQL. Familiarity with financial instruments and entities will be considered a plus.

This role requires an individual who is a fast learner, able to quickly comprehend business requirements and translate them into effective test cases using our in-house automated regression tools.

Skillset (Must have)

• Proven experience as a Software Test Engineer or similar role.

• Proficient in JSON, API, and SQL.

• Experience in regression and end-to-end testing.

• Strong problem solving skill and attention to detail.

• Excellent communication skill.

• Ability to learn quickly and work in a fast-paced environment.

• Experience in writing clear, concise, and comprehensive test plans and test cases.

• Willingness to support BAU operations as needed.

Skillset (Good to have)

• Familiarity with financial instruments and entities.

• Experience with performance testing.

• Knowledge of Agile/Scrum development principles.

• Experience with automated testing tools.

• Understanding of coding and scripting for automation purposes.

• Knowledge of continuous integration and continuous delivery (CI/CD) processes.

• Familiarity with version control systems like Git.

• Knowledge of software QA methodologies, tools, and processes.

Please refer to U3’s Privacy Notice for Job Applicants/Seekers at https://u3infotech.com/privacy-notice-job-applicants/. When you apply, you voluntarily consent to the collection, use and disclosure of your personal data for recruitment/employment and related purposes.

Job Description

1. Maintain, monitor the implementation & update of relevant audit programs
2. Provide technical advice & support various departments
3. Conduct compliance inspections in production floor & warehouse, identifying key areas for improvements and advice corrective actions
4. Perform QA inspections for incoming/outgoing cargoes based on compliance requirements
5. Coordinate with suppliers to resolve non-conformances
6. Provide in-house training on compliance etc for various departments

Job Requirement

• Diploma in Food Science/Food Technology or related disciplines
• Strong knowledge in food safety, well verse in GMP/GWP
• Strong analytical & problem solving skills
• Excellent interpersonal & communication skills

About Innowave Tech

Innowave Tech is a leading AI solution provider in the semiconductor industry, specializing in developing cutting-edge technologies for innovation and efficiency. Our focus is on leveraging computer vision and large-scale data analytics to meet the complex needs of our clients.

Position Overview:

As a Quality Management Intern, you will assist our Quality Assurance team in establishing and maintaining the ISO 9001 QMS. You will gain hands-on experience in quality management principles, documentation practices, and continuous improvement processes. This internship offers a unique opportunity to learn about ISO standards and contribute to the development of our quality management framework.

Responsibilities:

• Support QM Documentation: Assist in the creation, revision, and maintenance of QM documentation, including policies, procedures, work instructions, and forms.

• Data Analysis: Help analyze quality data and metrics, generate reports, and identify trends or areas for improvement.

• Process Improvement: Contribute to process improvement initiatives by participating in root cause analysis, corrective action planning, and effectiveness reviews.

• Audit Assistance: Support internal and external audits by preparing necessary documentation and coordinating audit logistics.

• Training Support: Aid in the development and delivery of QM training materials and sessions for employees.

• Compliance Monitoring: Assist in monitoring compliance with quality standards, regulatory requirements, and internal policies.

• Project Assistance: Work on special projects related to quality management and process optimization as assigned

Requirement:

• Currently pursuing a diploma or degree in Business Process and Systems Engineering, Quality Management, Industrial Engineering, or a related field. Recent graduates may also be considered.

• Strong analytical skills, attention to detail, and proficiency in Microsoft Office Suite (Word, Excel, PowerPoint).

• Basic understanding of quality management principles, ISO standards (e.g., ISO 9001), and quality tools (e.g., root cause analysis, statistical analysis) is preferred.

• Excellent written and verbal communication skills.

• Ability to work effectively in a team environment and collaborate with cross-functional teams.

• Enthusiasm for learning and a proactive attitude towards taking on new challenges.

• Resume stating nationality and school name due to MoM requirement, Singaporeans/PR preferred.

Screening Questions

1) Do you have basic understanding of quality management principles, ISO standards (e.g., ISO 9001), and quality tools?

2) Are you currently pursuing a degree in Engineering, Quality Management, Industrial Engineering, or a related field?

3) Do you have excellent written and verbal communication skills.

Task Management

• Develop and implement a comprehensive product quality improvement plan, aligned with the organization'soverall goals and objectives.
• Lead and participate in cross-functional teams to identify and analyse root causes of quality issues.
• Developing and implementing corrective and preventive actions to prevent future quality issues.
• Monitoring and reporting on product quality metrics to track progress and identify areas for improvement.
• Conduct audits and assessments to identify and address potential quality risks.
• Collaborate with suppliers to ensure their products meet our quality requirements.
• Collaborating with various teams such as engineering, manufacturing, classification societies, and suppliers to ensure consistent quality throughout the product lifecycle.
• Stay up-to-date on the latest quality improvement methodologies and tools.
• Track and analyse warranty data for reporting, change implementation to new products and continuous improvement
• Identify and communicate process and product improvements.
• Continually seek to identify areas of quality risk and resolve them before they impact on the vessel.
• Delivery of regular communications & reports to the Key internal relationships.
• Establish and maintain high standards of quality and control of cost within budget limits.
• Carry out customer familiarization of our products.
• Occasional travel to vessels country operating area to conduct fact finding on their operations and acceptance of our products in operation for quality.

Interpersonal Management

• Communicate effectively: This involves actively listening, clearly conveying information, and providing constructive feedback with all levels of staff.
• Build trust and rapport: This involves being genuine, respectful, and reliable.
• Ensure liaison with shipyard personal and management to ensure product quality performance is consistent with the aims of the organization.Develop and maintain key external relationships with partners, customers, contractors, suppliers and official
• bodies and organisations.
• Negotiate on behalf of the company, be able to accept realistic compromises when necessary.
• Develop a strong network of industry suppliers, subcontractors, and contacts.

Information Management

• Develop and manage quality improvement documentation and reporting.
• Develop full understanding of vessel/product specifications and performance.
• Develop full understanding of relevant classification and survey body rules that affect the quality performance of our products.
• Manage warranty claim documentation and continuous improvement feedback documentation to the shipyard.
• Personal Management
• Look for opportunities to continue to develop professionally.
• Show personal accountability for the achievement of objectives.
• Keep up to date with the industry best practice and monitor actions of competitors.

We are seeking a highly skilled and experienced Software Quality Assurance (QA) Lead to oversee the testing and quality assurance efforts for our web application projects. The ideal candidate will ensure the delivery of high-quality software by implementing robust testing strategies, managing a team of QA engineers, and collaborating with cross-functional teams to meet project goals and timelines.

Role & Responsibilities:

• Develop and implement QA strategies, test plans, and scripts for web and mobile applications.
• Lead and mentor a QA team, fostering collaboration with development and other stakeholders.
• Oversee all phases of testing, including functional, regression, performance, and security testing.
• Manage manual and automated testing efforts across multiple platforms (PC/Android/iOS).
• Identify and resolve software defects, collaborating with development teams to improve processes.
• Drive the adoption of automation testing frameworks and tools, optimizing test environments.
• Ensure compliance with security, accessibility, and regulatory standards.
• Promote a quality-focused culture throughout the development lifecycle.

Ideal candidate:

• 5+ years in software quality assurance, including 2+ years in a lead role.
• Strong understanding of web application architecture, testing methodologies, and SDLC.
• Experience with QA tools (e.g., Selenium, JIRA, Postman) and automation tools (e.g., Katalon, pCloudy).
• Familiarity with CI/CD pipelines, Agile/Scrum, and DevOps practices.
• Knowledge of performance testing tools (e.g., JMeter, LoadRunner) and scripting languages (e.g., Python, JavaScript).
• Hands-on experience with mobile and Svelte-based app testing frameworks.
• Strong leadership, problem-solving, and communication skills.
• Familiarity with Linux, Windows, Amazon Cloud, and EKS.

Our client specializes in controls design, including conveyor controls, tooling controls, process controls, vision system integration, and UL-certified control systems is in search of

Quality Technician - West

Responsibilities

• Review each circuit of the schematic to ensure proper wiring, confirming correct separation of voltages, communication, main power, and any accessory outlets.
• Verify that all parts match the Bill of Materials (BOM).
• Perform point-to-point continuity tests to ensure correct wiring.
• Check the correct wire gauge and colour.
• Inspect all labels, sit-track tags, for proper placement, accuracy, and cleanliness.
• Apply power to the panel to ensure all electrical components function correctly.
• Verify the paint colour and ensure no damage to the paint job.
• Document any discrepancies on the corrective action sheet and inform the appropriate team leader for necessary corrections.
• After repairs, recheck and verify that corrections are complete, initial the "checked by" box on the corrective action sheet.
• Sign off in the "QC checked by" box for the quality inspector on the QA sheet.
• Release the enclosure for dock audit and prepare it for shipment to the customer.

Requirements

• Minimum Nitec and above or its equivalent
• Ability to read and interpret electrical schematics preferred
• Knowledge of controls design preferred.
• Ability to work both independently and within a team

Interested applicants, kindly send in a copy of your updated resume in WORD document to [email protected]stating your current and expected remuneration together with notice period required to current employer.

EA License No: 12C6254 | EA Personnel Registration No: R1879665

Salling Search is currently recruiting for an experienced Quality Systems Manager for a reputable and established shipping company in Singapore.

Responsibilities

Quality Improvement and Monitoring

• Develop and implement a product quality improvement plan aligned with organizational goals.
• Monitor product quality metrics, analyze warranty data, and identify areas for continuous improvement.
• Conduct audits, assessments, and collaborate with suppliers to address quality risks.

Corrective and Preventive Actions

• Lead cross-functional teams to identify root causes of quality issues.
• Develop and implement corrective and preventive actions to mitigate future risks.
• Identify and communicate process and product improvements proactively.

Collaboration and Stakeholder Engagement

• Work closely with engineering, manufacturing, suppliers, and classification societies to ensure consistent quality.
• Build relationships with partners, customers, contractors, and official bodies.
• Liaise with shipyard personnel and management to ensure product quality meets organizational objectives.

Documentation and Compliance

• Develop and manage quality improvement documentation and reporting.
• Maintain a thorough understanding of product specifications, classification rules, and warranty claim processes.

Customer and Field Engagement

• Conduct customer familiarization with products and gather operational feedback.
• Travel occasionally to operational areas for fact-finding and quality assurance.

Professional and Interpersonal Skills

• Communicate effectively, build trust, and negotiate compromises when necessary.
• Stay updated on industry best practices and continuously develop professional skills.

Qualifications

• At least 6-8 years in management or supervision of marine vessel construction, operation, or maintenance with a proven track record.
• Formal marine or engineering qualifications are highly desirable.
• Strong negotiation, dispute resolution, and commercial acumen.
• Excellent communication and teamwork abilities.
• Proficient in managing documentation and records.
• A strong network of suppliers, subcontractors, and contacts is highly desirable.

Singapore

At Rolls-Royce, we pioneer cutting-edge technologies that deliver the cleanest, safest and most competitive solutions to our planet’s vital power needs. We embrace the power of data and technology and aim to be Digital First in everything we do.

Key Accountabilities

• To provide Quality and Safety leadership and expertise both internally and across the external Maintenance, Repair and Overhaul network for the APAC region to define and deploy strategies that drive quality improvement at pace.
• To provide Quality and Safety leadership to drive supplier maturity and improvement across the APAC region to deliver performance that enables the business to achieve its goals and enhance its reputation.
• Coach and lead suppliers to deliver an effective Zero Defects and Zero Harm strategy, underpinned by Quality Improvement Plans, whilst ensuring the Supplier has all the relevant prevention skills required.
• Development with the Supplier of their Quality Management System to ensure readiness for approval.
• Communicate a simple, compelling and consistent vision which suppliers understand and want to be part of.
• Engage and influence a wide range of people at all levels both internally and at Suppliers.
• Coach suppliers in complying with relevant requirements including MRO SABRe, Safety Management System and external / regulatory standards.
• Contribute to sourcing decisions by performing pre-selection assessments (ESSCA).
• Govern the delivery of the Quality performance (KPIs) of the aligned suppliers through performance and compliance monitoring to maximise efficiency and effectiveness in meeting requirements, business goals and enhancing its reputation. Where Quality performance diverges from target, drive and coach the suppliers on recovery.
• Protect the business and customer through performing, governing and coaching of problem containment and resolution methods and tools for aligned suppliers, to minimise impact and to ensure the necessary corrective and preventative actions are completed and verified in a timely manner. Ensure the effective governance of Problem Management exists in the aligned suppliers.
• Implement and ensure compliance to the SMT Operating System / Governance across the External MRO Network via implementation of a standardised Quality Governance across the MRO Network and in alignment with SMT priorities.
• Drive the deployment of the Supplier Maturity Assessment programme with identified Suppliers, by ensuring adherence to plan and a robust improvement plan is in place for each Supplier.
• Ensure suppliers self-lead improvement and engage appropriate internal and external resources.

Key Experiences and any Qualifications

• You will be Degree qualified or equivalent
• ​Demonstrated levels of leadership and influence
• Demonstrated MRO Part 145 knowledge essential
• You have demonstrated experience and track record of delivering results in a Quality Management role in an MRO Part 145 environment
• You can demonstrate good knowledge of relevant international standards or regulatory requirements
• You will have experience of root cause analysis, problem solving / 8D investigation methods and process improvement techniques.
• You will have experience in terms of containment activities and be able to provide regular updates to internal stakeholders.
• You will have a strong customer focus, able to effectively influence and challenge appropriately to manage customer expectations.
• Lean six-sigma Green Belt or Black Belt accredited, but not essential

Pioneer an enduring legacy. Join us and you’ll develop your skills and expertise to the very highest levels, working in an international environment for a company known the world over for brilliance and innovation.

Pioneers of Power

We are an equal opportunities employer. We’re committed to developing a diverse workforce and an inclusive working environment. We believe that people from different backgrounds and cultures give us different perspectives. And the more perspectives we have, the more successful we’ll be. By building a culture of respect and appreciation, we give everyone who works here the opportunity to realize their full potential.

You can learn more about our global Diversity and Inclusion strategy here.

So that you can be your best at work and home, we’ll consider flexible working arrangements for everyone, in any role. Click here for more details on how we can support you. Click here for more details on how we can support you.

Rolls-Royce follows a merit-based employee recruitment process and does not charge/accept any payment/security deposit from candidates during the recruitment process. Candidates seeking employment with Rolls-Royce should be cautious of potentially fraudulent communications and offers from individuals and agencies purporting to be from, or acting on behalf of, Rolls-Royce.

Please refer to the Career section on the Rolls-Royce website to verify employment offers or vacancies. Rolls-Royce shall not be liable for any loss, damage or consequences that may arise from any communication or offer of employment not directly made by Rolls-Royce.

Rolls-Royce reserves the right to take legal action against any individuals or agencies acting on behalf of Rolls-Royce without authorisation.

RESPONSIBILITIES:

• Develop and update the quality material database and ensure proper recording and documentation
• Ensure proper documentation of raw materials/ ingredients/ finished products & traceability in place
• Liaise with regulators on mandatory requirements and compliance related matters
• To provide internal and external customers with technical advice and/or documentation when required
• Assist in the maintenance of HACCP and BRCGS management system

REQUIREMENTS:

• Diploma / Bachelor's Degree in Food Science or related field.
• Good knowledge of Quality Management System (HACCP, BRC, ISO 22000)
• Good communication, Organizational and Analytical Skills
• Able to work in a team and independently

Job Description

• Lead and guide sub-contractor to achieve quality workmanship
• Handle paperworks , defects issuance and reporting
• Conduct defects investigation and identification

Requirement

• Minimum 4 years in CONQUAS
• Possess at least 2 good industry practices certificates
• Microsoft office knowledge
• Able to communicate with client and consultant

MKS is committed to being the highest quality and reliability provider of laser-based manufacturing systems for leading electronics and device manufacturers world-wide; helping them to optimize production of the materials, components and systems that are an integral part of the electronic devices in use today.

As part of the mission, the Quality Test Technician will be supporting EE Test Engineering in troubleshooting and repair activities on ESI PCBA/Control units.

Key responsibilities:

• Conducting First Article Test on new Subsystem, PCBA and Cable assemblies. Analyzing and determining hardware test requirements, supporting Test development activities.
• Maintain, Modify and Improve Test System hardware and fixtures.
• Support Engineers to deploy the new Test Fixtures at Production and external supplier. Resolve the Test Fixtures and Equipment issues on time.
• Perform hands-on assembly, set-up, testing, troubleshooting of PCBA and prioritize to resolve the issues.
• Support of FPY improvement activities and determines root cause of Manufacturing low Yield / Quality issues.
• Support Engineers to setup and conduct experiment/tests, compile and analyze data.
• Handle Field failures troubleshooting and provide updates to Engineering team to prevent future occurrences.
• Incorporate continuous improvement concepts and techniques into all aspects of Job.
• Inspect incoming mechanical parts and materials to ensure they meet required specifications and quality standards.
• Performs other duties as assigned by supervisor based on business needs.

Requirements:

• Minimum of three (3) years of experience in PCBA Testing and troubleshooting is preferred.
• ITE / Diploma or higher in engineering or equivalent.
• Able to read and interpret Electrical Schematics, Specifications and Manufacturing manuals.
• Experience with test equipment e.g. function Generator, Oscilloscope etc.
• Good written and verbal English language communications skills.

Responsibilities

You will assist in the tasks of the Quality Service and Finance units for the client, with a focus on both quality service and finance support, including:

Quality Service tasks:

1. Addressing clients' queries over the phone and via emails.

2. Attending to walk-in clients.

3. Providing administrative support to the QS team as needed.

4. Any other duties assigned by the QS Manager.

Finance tasks:

1. Handling procurement tasks and managing stock of pantry/stationery items.

2. Scanning, filing, and organizing documents.

3. Checking details in SCMS for investigations, processing refunds, and resolving discrepancies in backlog or current cases.

4. Assisting with the implementation of NETS at kiosks.

5. Sending email reminders to Hakams to submit claims.

6. Any other duties assigned by the Finance Officer/Manager.

Working Arrangement:

Working Hours:

Mon to Thurs – 8am to 5.30pm

Fri – 8am to 5pm

Sat-Sun and PHs - Not working

Duration: 6 Months

Location: Lengkok Bahru

Requirements:

1. Diploma in any discipline. Candidates without a diploma but with relevant work experience will also be considered. Fresh graduates are welcome to apply.

2. Proficient in Microsoft Office Suite (Word, Excel, PowerPoint) and the ability to work with multiple IT systems.

3. Good communication and writing skills

4. Organized with excellent time management skills and the ability to prioritize tasks effectively.

5. Ability to handle sensitive information with confidentiality.

6. Meticulous attention to detail, ensuring accuracy in document handling, procurement, and financial tasks.

7. Strong problem-solving skills and the ability to identify and resolve discrepancies in a timely manner.

8. A proactive, self-motivated individual who can work independently and collaboratively within a team.

9. Able to handle multiple tasks and work under pressure, while maintaining a high level of professionalism.

10. Passionate about serving the community and demonstrating empathy and respect when dealing with clients and colleagues.

EA License No.: 96C4864

Reg. No.: R22110485 SHANICE LIM XIN NI

Microbiology and Biochemical Product Testing:

• Perform EM such as active air sampling, surface and passive air samplings, plate readings and inspection of cleaned facility and sterilised equipment
• Responsible for planning,monitoring and approving microbiological testing
• Perform method Qualification,validation and product testing (e.g. sterility and endoxin) to support QC lot release.
• Perform stability testing of released final products as per protocol and timelines.
• Support assessment of certification/accreditation and services provided by external labs for QC testing.
• Knowledge in biochemical testing, including cell counts, flow cytometry, ELISA, PCR analysis, and compendial testing (pH, Appearance) as per USP, JP, and EP standards

Documents, Records and Data Management:

• Drafting and updating of Standard Operation Procedures (SOPs) and specification documents for EM, equipment, sampling plan, test methods, final products and raw/packaging materials.
• Author and review technical protocols and reports (e.g. EM risk analysis), develop guidelines and standard practices for data documentation, analysis and training.
• Review test results, document data and produce trends (e.g. EM) in an efficient, organised and presentable manner to facilitate discussions, support business and performance metrics reporting.

Deviations, Change Control and Audits Management:

• Support deviations (e.g. test OOS, EM excursion) initiation, investigations and root cause analysis for product defects and quality lapses.
• Support change control and CAPA implementation.
• Support internal and external audits/inspections.

Equipment and Lab Management:

• New equipement commisihing support( Operational qualification-OQ, Performance qualification- PQ
• Monitor and schedule equipment calibration and maintenance as per schedule and site master file.
• Perform lab housekeeping, lab cleaning and biohazard/waste management.
• Perform monitoring and procurement of lab inventory, for e.g. materials and consumables.

Continuous Improvement:

• Implement initiatives to encourage improvement of QC procedures, activities and workflows.
• Conduct routine literature review through established publication channels to ensure continual knowledge proficiency on both GMP and current technological trends relevant to CellVec’s activities.

Authorities and Responsibilities

1. Responsible for providing directives for the Quality Assurance Department in meeting management objectives.
2. Formulate, implement and evaluate quality strategies programs for the company.
3. Implement and maintain a system of auditing the facility and periodic calibration of test, measuring equipment and tools.
4. Manage customer complaints, corrective and preventive action programs.
5. Administer and manage continuous improvement program for all QA processes.
6. Work closely with auditors, customers, production and suppliers to meet the quality requirements.
7. Manage sub-contractors for on-time supply of treatment process, as well as meeting technical requirement.
8. Review / prepare, administer and implement Quality Assurance Plans, Inspection Test Plans and other Operational procedures in accordance to the technical specifications, customer's surveillance requirements, and good manufacturing / engineering practices, and enforce the same on Operations in their execution.
9. Work closely among inter-department to ensure committed schedules are met in a timely and effectively manner.
10. Review and approve disposition program / action for nonconforming products.
11. Ensure that processes needed for the quality management system are established and implemented.
12. Report to top management on the performance of the quality management system, and note needed improvements.
13. Ensure the promotion of awareness of statutory, regulatory and customer requirements throughout the organization.
14. Ensure and coordinate the implementation of risk assessment and risk control of medical devices

The Quality Assurance Manager plays a crucial role in business by ensuring that products meet certain standards of quality. He/She plans, directs or coordinates quality assurance programs and formulate quality control policies. He/She also works to improve an organisation's efficiency and profitability by reducing waste. He/She prepares and update quality documentation, basing their processes on a recognised standard such as ISO 9000 – Quality Management, published by the International Organisation for Standardisation. He/She supervises teams of inspectors who carry out the detailed assessment of products and their components at different stages of production. He/She recruits and trains supervisors, and provides them with documented quality standards as guidelines for their daily work. He/She also selects quality inspection tools and software to support the inspection team.

Competence Requirements:

• Diploma in Mechanical Engineering / Quality Engineering or equivalent.
• Minimum 6 years of solid experience in Quality Management in similar or related industry and 3 years in management level.
• Good knowledge in implementing and up keeping Quality Management System.
• Strong leadership and good interpersonal skills.
• A team player with strong sense of responsibility to ensure plant effective quality performance.

~ Assist in the implementation of company quality systems.
~ Conduct Quality Assurance audit.
~ Manage cause investigation for non-conformance.
~ Manage company quality systems.
~ Manage departmental activities and deployment.
~ Able to commute between Tuas Plant and Loyang Plant.

Key Responsibilities/Duties

• Engage project team and sub-contractors to deliver high quality works and ensure all temp works and permanent works done are in full compliance with LTA M&W Sep and PS clauses.
• Effectively implement GBSB's Project Quality Plan on site.
• Conduct internal Quality Audits, arrange site quality inspection and materials inspections with QPS.
• Liaise with authorities to achieve acceptance in materials submission, site quality inspections, documentation and compliances.
• Provide training to site staff on the deep understanding of quality standards, hold points and specifications for the site activities in advance.

Requirements:

• Degree in Civil Engineering or equivalent
• Minimum 5 years of relevant engineering experience for LTA MRT projects

At #TeamCPF, you’re not just joining a team; you are embracing a culture of excellence, collaboration, and meaningful impact. You will play a pivotal role in empowering over 4 million members to secure their retirement, healthcare, housing needs and better navigate life’s uncertainties.

We thrive on sharp minds and insightful decisions. Your ability to analyse and think critically isn't just valued; it's essential. Every choice you make contributes to our collective success.

Collaboration is our way of life. We believe in the power of effective partnerships and seamless communications across teams. Together, we amplify each other’s strengths and achieve remarkable results.

Our learning never stops. We encourage your inquisitiveness and courage to embrace new challenges head-on. Your agility, readiness to challenge conventions, embrace of data-driven strategies, dedication to learning and applying new skills fuels our innovation and progress.

At the core of everything we do lies a genuine desire to make a difference. We serve our community and support each other with compassion, empathy, and unwavering dedications. Every action we take is guided by a deep sense of purpose and a commitment to those we serve.

Join us at #TeamCPF! Together, let's redefine possibilities and leave a legacy that echoes for generations.

What you will be working on

As a part of the Service Quality Management team, you will be responsible for implementing and managing the Board’s Customer Relationship Management System (CRMS) that is used by both frontline and backend departments to handle correspondences with our customers. You will play a role in ensuring the successful deployment and integration of systems to enhance service quality and improve customer experience.

In this role, you will:

• Serve as the primary liaison between business teams, overseeing project progress and gathering feedback.
• Collaborate with stakeholders to define clear business requirements and ensure smooth integration of systems.
• Participate in testing to ensure system readiness and alignment with standards, and provide post-implementation support.
• Troubleshoot and resolve project blockers in collaboration with IT colleagues and vendors.
• Harmonise business processes to accommodate changes from the new system.
• Support change management communications and training plans for internal users during the transition phase.
• Provide training on new digital capabilities to deliver accurate information to customers.
• Identify gaps between systems and business needs for future enhancements.
• Review and streamline policies and processes based on emerging technologies and methodologies to keep abreast of market practices.

What we are looking for

We value the diverse talents and experiences that each individual brings to the table. While mastery of every requirement may not be necessary, familiarity and expertise in some of the following areas will position you for success within this team.

• Relevant experience in project management or operations management, preferably in a customer service or digital transformation environment.
• Familiarity with managing and implementing enhancements to improve processes and increase productivity/efficiency would be advantageous.
• Knowledge of CRMS platforms, such as Salesforce, will be an added advantage.
• Relevant strong experience with testing methodologies and quality assurance processes.
• Demonstrate strong communication and stakeholder management skills.
• Ability to work collaboratively in a cross-functional team environment.
• Ability to collaborate and communicate with stakeholders to ensure alignment and successful project outcomes.

The successful candidate will hold the corporate title of Manager/Senior Manager, with seniority based on individual work experiences.

Position is on a 1-year full-time contract directly under the payroll of CPF Board with an option to renew, contingent upon confirmation and subject to organisational needs.Additionally, there is potential for emplacement into a permanent position.

What you can expect

Being part of #TeamCPF means embarking on a challenging and rewarding career in a progressive workplace that values productivity and growth. Here’s what awaits you:

• Opportunities to engage in a mix of formal and informal training, keeping your skills sharp in our ever-evolving technological landscape.
• Promotion opportunities based on your capability and on-the-job performance.
• A vibrant community of like-minded and friendly colleagues, where collaboration and creativity thrive.
• A hybrid work model that offers flexibility for remote work, subject to exigencies of service.
• Flexible dress code that empowers you to choose your appropriate outfit for the day.
• A comprehensive rewards package that includes annual leave, pro-family leave, medical and dental benefits, and access to recreational activities.

About Central Provident Fund Board

At the Central Provident Fund (CPF) Board, we believe in developing individuals who are inspired to do their life’s best work, through 3Ps: Purposeful Work, Professional Growth, People & Culture.

Purposeful Work – The CPF Board helps 4 million members save for their retirement, healthcare and housing needs. Beyond being a pension fund, we are unique in being a national social security organisation, and we serve CPF members knowing that we make a difference.

Professional Growth – At CPF Board, you will have the opportunity to learn on the job and pick up new skills and knowledge. Although you are joining one organisation, you will have access to many career paths in the years ahead.

People and Culture – When you join CPF Board, you become part of a mission-oriented organisation with a strong culture of teamwork, collaboration, and innovation. As an employer, we value our people as our greatest asset, and foster a culture of respect, diversity, and inclusivity, where everyone's voice is heard, and contributions are recognised and celebrated.

Come and be a part of #TeamCPF today, to make a difference in the lives of others and in the future of Singapore.

[EYH(1]Remove?

Roles & Responsibilities

Job Responsibilities

· Lead and drive the team for continuous improvement on system and process, conduct monthly QPR meeting and review typical quality issues and follow up with team for improvement.

· Work as quality representative of tool room to manage customer audit, ISO audit and internal audit, prepare the team for the audit and subsequent activities.

· Monitor KPI of tool room and attend annual MR meeting to report tool room KPI performance.

· Lead QA/metrology team for inspection activities and work closely with engineering team for tool improvement.

· Study critical characteristic of new product drawing requirement, propose steel safe strategy with past similar tool experience into tooling design.

· Manage customer complaint and attend customer meeting related to quality or metrology issues.

· Monitor supplier quality performance and issue corrective and preventive action report to drive continuous improvements.

· Perform audits on supplier’s process to ensure quality control and quality assurance systems are in place

· Publish tool fabrication quality standards and ensure suppliers understood and comply with the requirements

· Assist in evaluation and qualification of new supplier.

· Other duties as and when assigned by Supervisor or Management

You may be authorized to:

· Contain suspected, non-conforming products and prevent from further processing.

· Stop new orders which do not conform to requirements.

Requirements

· Degree or Diploma in Quality Engineering or relevant

· Minimum 5 years of relevant experience in a plastic injection molding industry

· Knowledge and experience in GD&T, SQC tool

· Certified Internal Auditor for ISO 9001, ISO14001 and ISO 13485.

· Ability to apply problem solving technique and provide solutions under minimal supervision.

· Good written and oral communication skills

· Organized, decisive, logical, Independent and possess leadership, organization and communication skills

• 1 year renewable
• Central area - Clarke Quay
• Monday - Friday, office hours
• Handle mailbox survey submissions, feedback, and requests from survey respondents within stipulated turnaround time.
• Ensure consistent and detail cases notes updated in system after each liaison with respondents.
• Responsible for inter-department liaison for correct assignment of respondents to the parties responsible.
• Ensure prompt follow-up for survey cases under pending status.
• Provides accurate daily report on mailboxes activities for the day to relevant stakeholders.
• Ensuring all potential/actual complains are acted upon within stipulate timeline.

Interested candidates, please click on the following link to begin your job search journey and submit your curriculum vitae (CV) directly through the official PERSOLKELLY job application platform - GO. https://go.persolkelly.com/job/apply/5789

By sending us your personal data and CV, you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for account creation in GO and the purposes set out in the Privacy Policy https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with GO’s Terms of Use https://go.persolkelly.com/Tacand the Privacy Policy. If you wish to withdraw your consent, please email us at [email protected]. Please feel free to contact us if you have any queries. Suzana Binte Slemat (EAP No. R1989461) EA Licence No. 01C4394

Job Responsibilities:

• Management of Quality Management Systems.
• Support and maintain relevant systems both internally and externally.
• Responsible for Documentation Control system and Audits.

Job Requirements:

• Good working experience.
• Precision manufacturing industry.
• Adequate understanding of Quality Management System.
• Team player with good initiative and proactive.
• Microsoft office.

Responsibilities & Requirements:

The successful candidate for this role is expected to have a strong background in Regression and end-to-end Testing, with a deep understanding of JSON, API, and SQL. Familiarity with financial instruments and entities will be considered a plus.

This role requires an individual who is a fast learner, able to quickly comprehend business requirements and translate them into effective test cases using our in-house automated regression tools.

Skillset (Must have)

• Proven experience as a Software Test Engineer or similar role.

• Proficient in JSON, API, and SQL.

• Experience in regression and end-to-end testing.

• Strong problem solving skill and attention to detail.

• Excellent communication skill.

• Ability to learn quickly and work in a fast-paced environment.

• Experience in writing clear, concise, and comprehensive test plans and test cases.

• Willingness to support BAU operations as needed.

Skillset (Good to have)

• Familiarity with financial instruments and entities.

• Experience with performance testing.

• Knowledge of Agile/Scrum development principles.

• Experience with automated testing tools.

• Understanding of coding and scripting for automation purposes.

• Knowledge of continuous integration and continuous delivery (CI/CD) processes.

• Familiarity with version control systems like Git.

• Knowledge of software QA methodologies, tools, and processes.

Please refer to U3’s Privacy Notice for Job Applicants/Seekers at https://u3infotech.com/privacy-notice-job-applicants/. When you apply, you voluntarily consent to the collection, use and disclosure of your personal data for recruitment/employment and related purposes.