General Responsibilities

• Ensure that all services provided by the centres meet or exceed internal standards and quality assurance guidelines.
• Conduct audits to ensure regulatory compliance, reviewing internal processes and procedures, and identifying high-risk non-compliance areas in line with regulatory standards.
• Participate in initiatives aimed at improving the quality of early childhood care and education at the centres.
• Ensure adherence to corporate identity and guidelines across all centres.
• Ensure that the team provides a safe, nurturing environment that fosters children's social, emotional, physical, and intellectual development.
• Promptly escalate any issues or concerns to management.

Licensing and SPARK Certification

• Familiarity with the ECDC Act.
• Familiar with the SPARK QRS-U framework.
• Ensure that all centres comply with regulatory standards.
• Develop action plans to meet Licensing and SPARKS criteria.

Policies and Procedures

• Oversee, track, and monitor the centres' corrective action plans, ensuring that principals, supervisors, and staff follow through and assess the effectiveness of these actions.
• Motivate the team to achieve operational efficiency, maintaining organizational capabilities without compromising quality standards.

Requirements:

• Diploma in Early Childhood Care & Education (ECCE) or a related discipline.
• Minimum 3 years of relevant experience in the field.
• Knowledge of quality/compliance management and early childhood regulations and standards.
• Experience with quality improvement systems.
• Strong analytical skills, attention to detail, and ability to review data effectively.
• Proficient in Microsoft Word, Excel, and PowerPoint.
• Preferably a Junior Executive specializing in Quality Control/Assurance or a related role.

We regret only shortlisted candidates will be contacted. All applications will be handled confidentially. By submitting your application, you agree to the collection, use, retention, and disclosure of your personal information to prospective employers.

Wecruit Pte Ltd

EA License No. 20C0270

Our client is a well-established MNC, market leader in the 3PL Logistics industry. Due to their current expansion plan, they are looking for Quality Executive, in hopes of developing the current high performing team. They are located in the East - easily assessible.

Responsibilities:

• Conduct daily meetings to address logistics-related manufacturing NCs.
• Validate defects with QC support, providing corrective action recommendations.
• Resolve logistics issues with proper containment and corrective measures.
• Manage complaints, perform root cause analysis, and implement improvements.
• Lead quarterly audits, report findings, and ensure timely closures.
• Prepare quality guidelines and instructions.
• Oversee raw material warehouse quality supporting manufacturing.
• Compile weekly, monthly, and quarterly logistics reports for customer review.

Requirements:

• Min Degree in Supply Chain or related study
• Min 3 years of quality experience in manufacturing setting, well wersed in methodologies such as CAPA, GDPMDS and Six Sigma

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R2198636 (Oh Puey Xin)

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Engineer, Instrumentation & Control for the next phase of their business. They are located in West.

Duties:

• Provide technical support for Production and Maintenance teams on instrument-related issues.
• Work with teams to reduce instrument maintenance costs and improve functionality.
• Coordinate with external stakeholders on gas pipeline networks, electrical grids, instruments, and metering interfaces.
• Update maintenance procedures for instruments, PLC, Fire & Gas systems, ESD, metering, CCTV, and security equipment.
• Conduct root cause analysis for instrument incidents and recommend preventive actions.
• Implement MOC projects to enhance instrument reliability and operational efficiency.
• Ensure verification, inspection, testing, and certification of electrical and instrument equipment in hazardous areas.
• Support maintenance and major equipment turnarounds.
• Manage the functional safety lifecycle of SIS in the terminal.
• Assist in expansion projects, ensuring facility integrity and seamless integration.
• Participate in emergency response with designated roles and responsibilities.

Requirements

• Min Bachelor’s Degree in Engineering related field.
• Min 5 years’ experience in Oil & Gas or Petrochemical industry
• Experience in instrument & control maintenance

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Job Description

• Industry/ Organization Type: Material Handling Equipment Supplier
• Position Title: Control System Engineer (Electrical Control Panels)
• Working Location: East – Ubi (Walking distance from MRT to the company)
• Working Hours: 5 days (Mon-Fri: 8.30am-6pm)
• Salary Package: Up to SGD 4500 + AWS
• Duration: Permanent

Key Responsibilities

• Managing integration engineering tasks.
• Developing and implementing electrical circuits from the initial concept, through design, to programming.
• Programming PLCs, with proficiency in brands like Siemens, AB, Omron, Mitsubishi
• Installing, starting up, testing, and commissioning electrical control panels both in-house and on-site.
• Calculating complete costs for control panels necessary for projects.
• Conducting operational and maintenance training for customers and colleagues.
• Creating Operational and Maintenance manuals for completed projects.
• Diagnosing and repairing issues with delivery systems.
• Working independently both in-house and on-site.
• Coordinating with owners, subcontractors, and vendors.
• Meeting customer expectations according to engineering standards.
• Ensuring reports are submitted accurately and on time.

APPLY NOW!!!

• Min. Diploma in Electrical, Mechatronics, Automation, or Instrumentation Control System Engineering
• Min. 2 years of experience in the design and troubleshooting of Electrical Control Panels and PLC Programming
• Experience with material handling equipment or weighing systems is highly advantageous
• Hands-on experience in servicing and troubleshooting such systems is preferred
• Ability to read and understand schematic, electrical, and mechanical diagrams
• Must know Auto-CAD
• Willing to travel on short notice if required based on the project

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #71642 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Engineer, Instrumentation & Control for the next phase of their business. They are located in West.

Duties:

• Provide technical support for Production and Maintenance teams on instrument-related issues.
• Work with teams to reduce instrument maintenance costs and improve functionality.
• Coordinate with external stakeholders on gas pipeline networks, electrical grids, instruments, and metering interfaces.
• Update maintenance procedures for instruments, PLC, Fire & Gas systems, ESD, metering, CCTV, and security equipment.
• Conduct root cause analysis for instrument incidents and recommend preventive actions.
• Implement MOC projects to enhance instrument reliability and operational efficiency.
• Ensure verification, inspection, testing, and certification of electrical and instrument equipment in hazardous areas.
• Support maintenance and major equipment turnarounds.
• Manage the functional safety lifecycle of SIS in the terminal.
• Assist in expansion projects, ensuring facility integrity and seamless integration.
• Participate in emergency response with designated roles and responsibilities.

Requirements

• Min Bachelor’s Degree in Engineering related field.
• Min 5 years’ experience in Oil & Gas or Petrochemical industry
• Experience in instrument & control maintenance

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

Quality Assurance Manager (Biopharma/CBD/1 Year Contract)

Role Purpose:

The Responsible Person, Quality Assurance Manager Australia and New Zealand, will work collaboratively with relevant stakeholders to implement & maintain the local Australian and New Zealand QMS and will work with internal & external stakeholders to ensure quality requirements are met for organisation products, throughout the distribution network, and within Australia and New Zealand, all the way to patients.

Key Responsibilities:

• Establishes and maintains the Quality Management System in Australia and New Zealand to ensure that it meets local regulatory and industry standards and organisation expectations.
• Support maintenance of relevant licenses.
• Manages local process of change control, deviation, CAPA, complaint management and supplier management.
• Manages local Quality Management Review process.
• Participates in organisation’s Quality Escalation process for critical quality issues, and regulatory compliance issues.
• Ensures up to date organograms, training curricula pertaining to GMP/GDP, training records, CVs, and Job Descriptions are in place for local affiliate personnel working on quality/distribution matters.
• Establishes and maintains the Affiliate Quality Manual and GMP/GDP procedural documents.
• Establishes and maintains the Quality Agreement with 3PL/4PL and local GMP/GDP related suppliers/service providers, as required.
• Reviews Annual Product Quality Reports (if applicable)
• Ensures shipping conditions match the product license/product label particulars and transporters are appropriately qualified.
• Ensures premises and/or equipment used are reviewed regularly to ensure they are adequate to allow the handling, storage, and distribution of medicinal products in a manner that ensures the maintenance of product quality.
• Supports Customer Services with enquiries of a GDP nature such as delivery issues, transportation conditions, disputes, etc.
• Working with 3PL/4PL, provides guidance on supply related issues.
• Arranges authorized relabeling/repackaging in cooperation with 3PL/4PL (where applicable)
• Supports the management of quality and distribution complaints.
• Supports the investigation of fraudulent and counterfeit medicinal products.
• Manages product return and destruction.
• Manages local recalls and participating in supplier’s recall challenge or perform local mock recall, as needed.
• Qualifies and manages local 3PL/4PL and supports audit of 3PL/4PL.
• Qualifies and manages local GMP/GDP related suppliers/service providers, auditing and approving these according to local requirements.
• Assure customers validations and adequate records compliance to organisation QA requirements are established and maintained for all local distributors/customers.
• Collaborates with RA to support inspections and audits.
• Manages the Affiliate self-inspection program.
• Supports audit of distributor (where applicable).
• Collaborates with RA to implement activities for new product launch and product life cycle management.

Knowledge, Experience & Skills:

• Highly organized individual with a strong work ethic and ability to work flexibility and independently.
• Demonstrates proficiency in Good Manufacturing Practices (GMPs) and/or Good Distribution Practices (GDPs) and knowledgeable about the specific requirements for Australia and New Zealand.
• Demonstrates proficiency in application of QA principles, concepts, industry practices, and standards.
• Demonstrates proficiency in Quality Systems processes (Deviation, CAPA, Change Control, Complaints, etc.)
• Demonstrates a knowledge of regional/local regulatory requirements and industry standards.
• Demonstrates strong verbal, written, and interpersonal skills in English.
• Demonstrates proficiency in Microsoft Office applications, particularly, WORD, Excel, PowerPoint, and Teams. Familiarity with technology platforms such as Veeva Vault, SAP ERP, etc.
• Working knowledge of Risk Management tools (e.g., Failure Mode Effects Analysis (FMEA) is preferred.

Typical Educational Experience & Competencies

• Bachelors’ degree and 7+ years of relevant experience in a GMP or GDP environment-related field
• Masters’ degree and 5+ years of relevant experience in a GMP or GDP environment related field.
• Ability to work on own initiative as well as display strong teamwork skills.
• Demonstrates clear personal responsibility for own work, in terms of both the quality of the work and the manner in which it is performed. ‘
• Ability to support change and respond to change requirements by continually striving to improve working processes and systems, consistent with the organisational strategy.

EA License No. 01C4394 • RCB No. 200007268E •EA Registration No. R22109454 Malcolm Lee Jun Hao

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

Job Description

• Industry/ Organization Type: System Integration
• Position Title: Electrical Engineer
• Working Location: West (Nearest MRT: Tuas Link) – take 6 bus stops to reach the company
• Working Hours: 5 days (Monday to Friday: 9 am-6 pm)
• Salary Package: Up to SGD 4000 + AWS + Variable bonus
• Duration: Permanent

Key Responsibilities

• Design and prepare electrical drawings for control panels
• Sizing of cables, CB, and other components for control panels
• Instructing technicians on assembling control panels
• Supervising and instructing technicians during offsite maintenance or repairs of control panels
• Able to troubleshoot and repair electrical faults in control systems
• Program and configure VFD, temperature controller, and other devices
• Managing and organizing the equipment and inventory on the shop floor

APPLY NOW!!!

• Min. Diploma in Electrical Engineer
• Min. 3 years of working experience in the related field, especially experience with designing and preparing electrical drawings for control panels
• Possess technical skills and knowledge of Transformers, Motors, Motor Starters, Testing and Commissioning
• Familiar with AutoCad
• Knowledge of PLC programs (ABB) will be a plus

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #67518 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

Our client is from Oil and Gas industry. They are looking for a Electrical & Control Maintenance Supervisor to assist their team for the next phase of their business. They are located in West.

Duties:

• Lead and supervise electrical technicians and contractors in system installation, maintenance, and repair.
• Develop and conduct on-the-job training programs for E&I team members.
• Perform site inspections and quality control for electrical work.
• Review and approve electrical isolation, excavation, and related permits.
• Investigate electrical maintenance issues, identify root causes, and implement solutions.
• Collaborate with other engineers to ensure equipment reliability through effective maintenance programs.

Requirements:

• Minimum Bachelors Degree in Electrical Engineering or any relevant field.
• Minimum 8 to 12 years experience in Oil and Gas Industry or any relevant industry.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

Job Description

• Industry/ Organization Type: Material Handling Equipment Supplier
• Position Title: Control System Engineer (Electrical Control Panels)
• Working Location: East – Ubi (Walking distance from MRT to the company)
• Working Hours: 5 days (Mon-Fri: 8.30am-6pm)
• Salary Package: Up to SGD 4500 + AWS
• Duration: Permanent

Key Responsibilities

• Managing integration engineering tasks.
• Developing and implementing electrical circuits from the initial concept, through design, to programming.
• Programming PLCs, with proficiency in brands like Siemens, AB, Omron, Mitsubishi
• Installing, starting up, testing, and commissioning electrical control panels both in-house and on-site.
• Calculating complete costs for control panels necessary for projects.
• Conducting operational and maintenance training for customers and colleagues.
• Creating Operational and Maintenance manuals for completed projects.
• Diagnosing and repairing issues with delivery systems.
• Working independently both in-house and on-site.
• Coordinating with owners, subcontractors, and vendors.
• Meeting customer expectations according to engineering standards.
• Ensuring reports are submitted accurately and on time.

APPLY NOW!!!

• Min. Diploma in Electrical, Mechatronics, Automation, or Instrumentation Control System Engineering
• Min. 2 years of experience in the design and troubleshooting of Electrical Control Panels and PLC Programming
• Experience with material handling equipment or weighing systems is highly advantageous
• Hands-on experience in servicing and troubleshooting such systems is preferred
• Ability to read and understand schematic, electrical, and mechanical diagrams
• Must know Auto-CAD
• Willing to travel on short notice if required based on the project

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #71642 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

Our client is from Oil and Gas industry. They are looking for a Electrical & Control Maintenance Supervisor to assist their team for the next phase of their business. They are located in West.

Duties:

• Lead and supervise electrical technicians and contractors in system installation, maintenance, and repair.
• Develop and conduct on-the-job training programs for E&I team members.
• Perform site inspections and quality control for electrical work.
• Review and approve electrical isolation, excavation, and related permits.
• Investigate electrical maintenance issues, identify root causes, and implement solutions.
• Collaborate with other engineers to ensure equipment reliability through effective maintenance programs.

Requirements:

• Minimum Bachelors Degree in Electrical Engineering or any relevant field.
• Minimum 8 to 12 years experience in Oil and Gas Industry or any relevant industry.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R22108850 (Chan Mun Mun)

Singapore

At Rolls-Royce, we pioneer cutting-edge technologies that deliver the cleanest, safest and most competitive solutions to our planet’s vital power needs. We embrace the power of data and technology and aim to be Digital First in everything we do.

Key Accountabilities

• To provide Quality and Safety leadership and expertise both internally and across the external Maintenance, Repair and Overhaul network for the APAC region to define and deploy strategies that drive quality improvement at pace.
• To provide Quality and Safety leadership to drive supplier maturity and improvement across the APAC region to deliver performance that enables the business to achieve its goals and enhance its reputation.
• Coach and lead suppliers to deliver an effective Zero Defects and Zero Harm strategy, underpinned by Quality Improvement Plans, whilst ensuring the Supplier has all the relevant prevention skills required.
• Development with the Supplier of their Quality Management System to ensure readiness for approval.
• Communicate a simple, compelling and consistent vision which suppliers understand and want to be part of.
• Engage and influence a wide range of people at all levels both internally and at Suppliers.
• Coach suppliers in complying with relevant requirements including MRO SABRe, Safety Management System and external / regulatory standards.
• Contribute to sourcing decisions by performing pre-selection assessments (ESSCA).
• Govern the delivery of the Quality performance (KPIs) of the aligned suppliers through performance and compliance monitoring to maximise efficiency and effectiveness in meeting requirements, business goals and enhancing its reputation. Where Quality performance diverges from target, drive and coach the suppliers on recovery.
• Protect the business and customer through performing, governing and coaching of problem containment and resolution methods and tools for aligned suppliers, to minimise impact and to ensure the necessary corrective and preventative actions are completed and verified in a timely manner. Ensure the effective governance of Problem Management exists in the aligned suppliers.
• Implement and ensure compliance to the SMT Operating System / Governance across the External MRO Network via implementation of a standardised Quality Governance across the MRO Network and in alignment with SMT priorities.
• Drive the deployment of the Supplier Maturity Assessment programme with identified Suppliers, by ensuring adherence to plan and a robust improvement plan is in place for each Supplier.
• Ensure suppliers self-lead improvement and engage appropriate internal and external resources.

Key Experiences and any Qualifications

• You will be Degree qualified or equivalent
• ​Demonstrated levels of leadership and influence
• Demonstrated MRO Part 145 knowledge essential
• You have demonstrated experience and track record of delivering results in a Quality Management role in an MRO Part 145 environment
• You can demonstrate good knowledge of relevant international standards or regulatory requirements
• You will have experience of root cause analysis, problem solving / 8D investigation methods and process improvement techniques.
• You will have experience in terms of containment activities and be able to provide regular updates to internal stakeholders.
• You will have a strong customer focus, able to effectively influence and challenge appropriately to manage customer expectations.
• Lean six-sigma Green Belt or Black Belt accredited, but not essential

Pioneer an enduring legacy. Join us and you’ll develop your skills and expertise to the very highest levels, working in an international environment for a company known the world over for brilliance and innovation.

Pioneers of Power

We are an equal opportunities employer. We’re committed to developing a diverse workforce and an inclusive working environment. We believe that people from different backgrounds and cultures give us different perspectives. And the more perspectives we have, the more successful we’ll be. By building a culture of respect and appreciation, we give everyone who works here the opportunity to realize their full potential.

You can learn more about our global Diversity and Inclusion strategy here.

So that you can be your best at work and home, we’ll consider flexible working arrangements for everyone, in any role. Click here for more details on how we can support you. Click here for more details on how we can support you.

Rolls-Royce follows a merit-based employee recruitment process and does not charge/accept any payment/security deposit from candidates during the recruitment process. Candidates seeking employment with Rolls-Royce should be cautious of potentially fraudulent communications and offers from individuals and agencies purporting to be from, or acting on behalf of, Rolls-Royce.

Please refer to the Career section on the Rolls-Royce website to verify employment offers or vacancies. Rolls-Royce shall not be liable for any loss, damage or consequences that may arise from any communication or offer of employment not directly made by Rolls-Royce.

Rolls-Royce reserves the right to take legal action against any individuals or agencies acting on behalf of Rolls-Royce without authorisation.

• Well Established Company
• Basic $ 2700 to $ 3500 + AWS + VB
• No Experience Welcome – Training will be provided
• Working Location: Tuas, Singapore (Company Transport Provided)
• Normal Working Hours (Monday - Friday)

Job Responsibilities:

• Inspect outgoing parts and incoming sub-contracted parts according to established procedure / specification of inspection and carry out incoming process inspection
• Authorise the rejection of parts if found unsatisfactory
• Authorise the release of conforming parts to be sent to the store for subsequent delivery to customers
• Perform factory routine test and check of switchboards completed in the workshop
• Testing and commissioning of switchboards on board vessels or on-site to the satisfaction of customers; and attend to warranty claims / quality complaints
• Maintain good housekeeping in the QA department
• Observe and adhere to safety rules during the performance of every task
• Initiate, recommend, or provide solutions to problem detected
• Control further processing and delivery of non-Conforming products until the deficiency has been corrected
• Follow the procedures of Quality Management System for effective implementation and control
• Carry out other responsibilities as and when assigned by the superiors

Requirements:

• Diploma in Electrical Engineering or equivalent
• Training will be provided for candidate without / with less experience

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume:

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

NG DIAUM YEE (R2198031)

EA Recruitment Pte Ltd

EA License No: 21C0492

whatsapp: 85986715

singaporean,PR can apply

Daily cosmetic raw material production platform: quality director

Location: Johor Bahru, Malaysia

Recruitment Position： Quality Director

Job Responsibilities

1 review and approve all appropriate quality-related documents;

2 Releasing or rejecting all APIs. Releasing or rejecting intermediates for use outside the control of the manufacturing company;

3 Establishing a system to release or reject raw materials, intermediates, packaging and labelling materials;

4 Making sure that critical deviations are investigated and resolved;

5 Approving all specifications and master production instructions;

6 Approving all procedures impacting the quality of intermediates or APIs;

7 Making sure that internal audits (self-inspections) are performed;

8 Approving intermediate and API contract manufacturers;

9 Approving changes that potentially impact intermediate or API quality;

10 Reviewing and approving validation protocols and reports;

11 Making sure that quality related complaints are investigated and resolved;

12 Making sure that effective systems are used for maintaining and calibrating critical equipment;

13 Making sure that materials are appropriately tested and the results are reported;

14 Making sure that there is stability data to support retest or expiry dates and storage conditions on APIs and/or intermediates where appropriate;

15 Performing product quality reviews.

Job Requirements

1 University or academic degree in chemistry, biology, pharmacy or equivalent.

2 Proficient in English required.

3 Minimum of 7 years’ experience in pharmaceutical factory, in Manufacturing, and QA Manager for 5 Years at least; with a thorough knowledge in chemistry, pharmacy and/or biotechnology.

4 Familiar with ICH Q7 guidelines and have accepted FDA, EDQM audit experience.

5 Profound experience leading sophisticated quality organizations in a diverse global matrix environment，Ability to speak up and to take Quality decisions during challenging situation.

6 Strong leadership skills with excellent interpersonal, communication abilities.

7. can speak simple chinese and english

Salary: $10000-$15000 singapore dollar

Jie Shun Jia | EA License No.: 24C2410 | EA Registration No.: R24124440 (FENG YINGJIE)

- 1 year renewable contract

- Up to 3,000 + PB

- Monday to Friday: 9am – 6.30pm

- Novena

Responsibilities:

• Deliver Quality Assurance objectives by conducting regular call reviews and highlight any potential risk to management.
• Review 15 of closed sales calls per day for General Insurance Team.
• Backup for Auto Insurance for Call Review purposes.
• Promptly report any calls detected with potential quality issues (e.g. misrepresentation, fraudulent) to Management.
• Prepare, track and send Quality Assurance related reports to UOB management and team. (NMD, Service Quality Monthly, Penalty Points Table)
• Keep track on all the status of Quality Assurance Cases from beginning to end process and provide update to management on a timely manner.
• Weekly meeting with management to discuss on discrepancies and solutions for further improvements.
• Other ad-hoc duties as assigned by supervisor

Period:

• 1 Year Renewable Contract

Location:

• Novena

Working Hours:

• Monday – Friday (9.00am – 6.30pm)

Salary:

• Up to 3,000 + PB

Requirements:

• Good to have BCP and PGI Certificates.
• Preferably have quality assurance experience and insurance products knowledge.
• Meticulous and responsible team player.
• Proficient in Microsoft Office.
• Able to multi-task.
• Fast Learner and willing to learn on multiple Insurance Products.

Interested applicants, kindly email your detailed resume (MS Word format is preferred):

[email protected] (Reg No: R1549023)

Please ensure that applications sent through email are no bigger than 1Mb.

We thank all applicants for your interest but regret to inform that only shortlisted candidates would be notified.

Success Resource Centre Pte Ltd (EA License Number: 04C3201)
160 Robinson Road, #13-07/08/09 SBF Center, Singapore 068914

T: 6337 3183 | W: www.successhrc.com.sg

Job Description

• Industry/ Organization Type: Education
• Position Title: Quality Assurance Executive
• Working Location: Seletar
• Working Hours: 5 Days, Mon – Fri (9am – 6pm)
• Salary Package: Basic Salary (Up to $5,000) + AWS
• Duration: Permanent

Key Responsibilities

• Support the Manager in performing audits to ensure adherence to standards, including those under the Private Education Act, Private Education Regulations, EduTrust Certification Scheme, and Enhanced Registration Framework.
• Evaluate audit data to pinpoint performance discrepancies, observe trends, and assess process efficiency for ongoing enhancement.
• Work alongside departments to grasp relevant frameworks, organizational policies, and procedures, and suggest modifications.
• Discover opportunities for refining audit and/ or assessment processes.
• Other tasks as necessary.

APPLY NOW!!!

• Proficient in audit management, data analysis, quality assurance, and internal controls.
• Experience in Quality Assurance within a Private Education Institution (PEI) is an added advantage
• Familiarity with the Private Education Act, Enhanced Registration Framework, EduTrust Certification Scheme, and related standards is preferred.
• Excellent problem-solving, communication, and interpersonal abilities.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #71571 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

• Well Established Company
• Basic $4000 - $4800 + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: East
• Working day: Monday to Friday
• Working hours: 8.30am to 6pm

Job Responsibilities:

• Responsible for quality issues arising from production and customer feedback, and collaborate with the production tea to address internal process issues and implement corrective actions to resolve customer complaints with proper documentation
• Implement the quality inspection standards, on incoming, in process and outgoing inspections, and provide QA inputs to production to resolve quality-related issues at in-process and final inspections
• Responsible for timely closure of Corrective and Preventive Actions (CAPA), non-conformance investigation report and customer complaints and, publish reports on quality performance
• Lead the Material Review Board (MRB) meeting involving members from production, engineering and quality departments to conduct root cause analysis, address quality issues, implement corrective actions and review its effectiveness
• Lead the team of QC inspectors in the inspection of parts for conformity in accordance with relevant drawing requirements
• Perform any other duties, as assigned

Job Requirements:

• Minimum Diploma or Degree in Precision Engineering, Quality Management or Mechanical Engineering with 2 years of working experience in quality engineering or manufacturing

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

• 5 days work week
• Location: North

Job Scope:

• Take charge of our Integrated Management System, ensuring processes are documented, owned, and regularly improved.
• Lead internal audits by preparing schedules, conducting audits, reporting findings, and implementing corrective actions.
• Investigate non-conformances, pinpoint root causes, and implement effective solutions to enhance operational quality.
• Oversee compliance with QHSE standards, ensuring alignment with industry and customer requirements.
• Manage document control systems, keeping records accurate, up-to-date, and aligned with regulatory needs.
• Conduct internal training to ensure the team stays ahead in aviation-related standards and practices.
• Collaborate with cross-functional teams to monitor and report quality metrics, driving data-driven decisions.
• Lead quality investigations, identify improvement opportunities, and escalate key findings to management.

Job Requirement:

• A Diploma/Degree in Engineering, preferably in Quality Engineering.
• At least 2 years of hands-on Quality Assurance experience in the aviation industry.
• Proficiency with ISO standards (ISO 9001, ISO 14001, TS 16949) and statistical tools.
• Strong analytical mindset with excellent problem-solving and communication skills.
• Internal/Lead Auditor certification (preferred) and a passion for knowledge-sharing (Train-the-Trainer qualification is a bonus).

To Apply, kindly click on the "APPLY NOW" button

We regret that only shortlisted candidates will be notified.

Staffking Pte Ltd (20C0358) | Chong Kar Ming (John) (R21101412)

Note: This role will require travel and based in China and Vietnam for at least 10 months per year. Proficiency in Mandarin is essential for effective communication with Chinese-speaking clients and stakeholders.

Job Summary:

• We are seeking an experienced Senior Supplier Quality Engineer (SQE) to lead quality and process optimization efforts across our supplier network, with a strong focus on mechanical processes (e.g., metal stamping, forging, brazing, die casting, CNC machining, and milling). The successful candidate will work within the electronics and computing sectors, particularly focusing on thermal cooling solutions, ensuring that our suppliers meet rigorous quality standards and process reliability. You will collaborate closely with suppliers to enhance product quality, optimize processes, and drive continuous improvement.

Key Responsibilities:

• Develop and implement systems to monitor and assess supplier quality. Ensure that materials and components, particularly those related to mechanical processes (e.g., metalworking, tooling, fixture and jig design), comply with specified standards. Address and resolve any non-conformance issues.
• Work closely with suppliers to optimize their manufacturing processes, such as metal stamping, forging, brazing, die casting, CNC machining, and milling. Drive improvements in process yield and consistency to ensure the high quality of materials and components.
• Lead the resolution of abnormal quality issues in collaboration with suppliers, focusing on root cause analysis and the implementation of corrective and preventive actions.
• Perform detailed audits to evaluate suppliers' quality management systems and process capabilities, particularly in mechanical and metalworking processes. Ensure adherence to relevant industry standards, and drive improvement actions based on audit findings.
• Work in partnership with suppliers to develop and enhance their quality processes and manufacturing practices. Ensure that their systems align with company standards, especially in the areas of tooling design and fixture/jig manufacturing.
• Collaborate with internal teams (design, production, procurement) to ensure clear communication of quality expectations and standards.
• Promote a culture of continuous improvement within the supplier network, focusing on enhancing quality management systems and manufacturing practices for metal-based components and mechanical parts.

Requirements:

• Bachelor’s degree in Engineering, Quality Assurance, or a related field.
• Minimum 5-7 years of relevant experience in supplier quality engineering or a similar role within the manufacturing or electronics industry.
• Proven experience with mechanical processes such as metal stamping, forging, brazing, die casting, CNC machining, and milling.
• Strong understanding of supplier quality management systems and industry standards.
• In-depth knowledge of metalworking, tooling design, and the manufacture of fixtures and jigs.
• Strong analytical, problem-solving, and negotiation skills.
• Experience with supplier audits, corrective actions, and continuous improvement processes.
• Six Sigma certification (or similar qualifications) is advantageous.
• Willingness to travel and based in China and Vietnam at least 10 months per year. (separate living arrangements provided, includes four round-trip tickets to Singapore annually)

The client is the world’s leading oilfield services provider which specialized in the manufacturing of electrical submergible pumps for the oil and gas industry.

Position: Quality Technician (12 months contract)

Working Hours: Office working hours (eligible for OT)

Working Place: West Singapore

Job Purpose:

Responsible for the proper exercise of QHSE Policy and Procedures required by company and conduct daily parts inspection and factory acceptance test in line with specifications, standards, and procedures in a timely manner.

• QHSE Responsibility: Comply with Company QHSE (Quality, Health, Safety, Environment) policies and Standards; Comply with government laws and regulations on Quality, Health, Safety, and Environment; Commit to QHSE target year by year with his specific QHSE responsibility on site.
• Conduct tests and measures all electronic products, components, assemblies, and subassemblies to make sure they are fully functioning, accurate and assembled correctly and in accordance with specifications
• Work from complicated drawings, and specifications, using standard methods and procedures to perform dimensional inspection.
• Document the results of inspections and tests using the designated business system, following the defined procedure and test plan.
• Ensure that measurement systems have valid calibration and are functional for the product inspection and test.
• Perform factory acceptance test according to procedure.

Requirements:

• NITEC/Diploma in Electronics/Electrical/ Mechanical or equivalent
• Prior training in electronics and related work experience including testing and reviewing electronic components would be preferred.
• Minimum 2 years of related working experience from a manufacturing environment
• CMM programming experience
• Meticulous, well organized, independent and good housekeeping skills

**Interested candidates, kindly email updated resume to [email protected] with

Subject of "QC Technician", thank you.

Support day-to-day training administration for the Company. Interacts with all levels of staff in the Company with regards to in-house training, external training, on-the-job training and education.

Training Needs Analysis and Training Plan

• Compile the Training Needs for the year
• Analyze the training needs of staff and develop a total training plan yearly
• Educate or provide awareness training on Training Needs Analysis as required

Training Management and Communication

• Upkeep of all staff training records
• Conduct/Coordinate on training such as ISO9000, AS9100, ISO14000, OHSAS18001, Technical training, Soft Skills & etc.
• Assist in program design and development for in-house training
• Source, evaluate and engage external consultants for selected training programs
• Create training awareness & schedule through internal promotion, intranet & etc.
• Liaise with government institution for training grants or subsidies
• Review and recommend policies and procedures to increase the effectiveness and efficiency of the people development functions
• Control and monitor the total training budget for the company
• Set up an information system for the people development function to provide pertinent feedback to management

Training Evaluation

• Compile all training evaluation results after each training
• Provide monthly reports on training results, expenditure & etc.
• Develop and evaluate all four levels of training and ensure prompt feedback of information
• Provide half-yearly training report on the Total Training Plan and its effectiveness
• Comply with the ISO9001, AS9100, ISO4001 & OHSAS18001 Management system

Other Tasks

• Familiar with Quality Control Circle criteria and able to conduct and facilitate the teams.
• In charge of Staff Suggestion Scheme and ensure all employees to participate during Quality month
• Involve in GHG reduction activities
• Submit OHS & HSE data to HQ quarterly
• Other tasks assigned by superior.
• Ensure implementation of people development policies and procedures
• Timely compilation of Training Needs Analysis of the company yearly
• Implementation of training identified in the Total Training Plan
• The Company Education budget is appropriately used

Requirements:

• Degree in Business Administration with 2 years related experiences or Diploma in Training & Development with 4 –5 years training experience
• Possess good interpersonal skills
• Good oral & written communication skills
• Able to work as a team player
• Knowledge in People Developer Standard & it’s requirements
• Computer literate & proficient in MS Office
• Good understanding of Training Fund on all government statutory board requirements
• Stand up training experience is essential.

5 days work week

Bedok Area

Manufacturing Co.

Interested candidates, please forward a detailed resume and email to [email protected]

Tempserv Pte Ltd
License No: 06C3745
Attention: Audris Teo / EA Personnel No: R1102063

Job Description

• Basic Up $2500
• Mon to Friday (Office Hours)
• AWS+VB
• East

Job Responsibilities

• Inspect aircraft spares
• Verify aircraft spares to ensure appropriate accompanying documents from the OEMs, vendors and suppliers
• Work on continuous improvement projects to improve work areas & procedures
• Facilitate periodic audits from civil aviation authorities & customers
• Maintain Shelf Life records for aircraft spares with limited life
• Monitor and conduct surveillance audits on all stores activities within the Bonded Stores
• Raise Discrepancy Reports for any discrepancies found on any aircraft spares in the Bonded Stores

Interested Applicants, kindly WhatsApp me at +65 8500 3939 or email me at [email protected]

We regret to inform that only shortlisted candidates will be notified.

EA Personnel Name: Chin Jia Hui, Janice
EA Personnel No: R22107485
EA License No: 15C7752

The Job:

• Devising and implementing methods and procedures for inspecting, testing and evaluating the precision and accuracy of products and production equipment
• Designing and analysing inspection and testing processes, mechanisms, and equipment
• Conducting quality assurance tests and performing statistical analysis to assess the level of control and manage product quality risks
• Undertaking root cause analysis of incidents requiring corrective action
• Ensure that corrective measures and deviation meet acceptable reliability standards
• Other ad hoc duties assigned

Requirements

• API Q1 and Q2 certifications
• Internal audit certification

Interested applicants can send their detailed resumes to [email protected] or call JANE @ 6735 1955.

JANE LUI JIE'EN

CEI: R1104482

Company Reg. No. 199601303W || EA Licence No. 99C4599

Job Description

• Industry/ Organization Type: Education
• Position Title: Quality Assurance Executive
• Working Location: Seletar
• Working Hours: 5 Days, Mon – Fri (9am – 6pm)
• Salary Package: Basic Salary (Up to $5,000) + AWS
• Duration: Permanent

Key Responsibilities

• Support the Manager in performing audits to ensure adherence to standards, including those under the Private Education Act, Private Education Regulations, EduTrust Certification Scheme, and Enhanced Registration Framework.
• Evaluate audit data to pinpoint performance discrepancies, observe trends, and assess process efficiency for ongoing enhancement.
• Work alongside departments to grasp relevant frameworks, organizational policies, and procedures, and suggest modifications.
• Discover opportunities for refining audit and/ or assessment processes.
• Other tasks as necessary.

APPLY NOW!!!

• Proficient in audit management, data analysis, quality assurance, and internal controls.
• Experience in Quality Assurance within a Private Education Institution (PEI) is an added advantage
• Familiarity with the Private Education Act, Enhanced Registration Framework, EduTrust Certification Scheme, and related standards is preferred.
• Excellent problem-solving, communication, and interpersonal abilities.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #71571 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Note: This role will require travel and based in China and Vietnam for at least 10 months per year. Proficiency in Mandarin is essential for effective communication with Chinese-speaking clients and stakeholders.

Job Summary:

• We are seeking a talented Senior Design Quality Engineer (DQE) to lead quality initiatives for our thermal cooling solutions within the electronics and computing industry. The ideal candidate will be responsible for ensuring design and process quality while driving continuous improvements to achieve product excellence. If you are passionate about quality control, process optimization, and collaborating across functions, we encourage you to apply.

Key Responsibilities:

• Implement advanced monitoring systems to enhance product quality and yield. Identify areas for improvement and lead initiatives to optimize production processes.
• Take charge of addressing and improving abnormal quality issues in manufacturing processes. Collaborate with cross-functional teams to implement effective solutions and preventive measures.
• Strengthen internal quality control processes and improve overall capabilities, particularly in mechanical processes such as metal stamping, forging, brazing, die casting, CNC machining, and milling. Drive initiatives aimed at maximizing operational efficiency.
• Lead corrective actions for customer-reported quality issues and communicate preventive solutions to relevant stakeholders.
• Streamline quality inspection planning by integrating automation and advanced technologies whenever possible.
• Promote effective communication and coordination with design, production, and other teams to ensure adherence to quality standards.
• Manage task assignments, performance, and development of the quality team, ensuring timely completion of deliverables.

Requirements:

• Bachelor’s degree in Mechanical Engineering, Industrial Engineering, Quality Engineering, or a related field.
• Minimum of 5-7 years of experience in quality engineering, particularly in manufacturing and design quality.
• Proven experience in mechanical processes, including metal stamping, forging, brazing, die casting, CNC machining, milling, and knowledge of tooling and the design/manufacture of fixtures and jigs.
• Strong analytical, problem-solving, and leadership abilities.
• Familiarity with quality management systems and standards.
• Six Sigma certification or equivalent is a plus.
• Willingness to travel frequently and work abroad in China and Vietnam for at least 10 months per year (includes four round-trip tickets to Singapore annually and separate arrangements for living accommodations).

Responsibilities:

• Same as Associate Consultant but with an increased level of responsibility, including leading the test strategy development and mentoring junior testers.
• Take on more complex test automation projects and drive improvements in test processes.
• Manage cross-functional teams to ensure quality standards are met throughout the development cycle.
• Provide technical leadership for test automation and work closely with Product Owners and developers to ensure optimal test coverage.

Experience and Skills Needed:

• More than 4 years of experience in exploratory testing and automation.
• Proven experience in leading test automation initiatives and mentoring junior team members.
• Strong understanding of Agile testing practices and tools.
• Excellent communication and leadership skills.