• Carry out incident investigation, VDR analysis, on board audits / inspections and training as assigned.
• Assist the company with business development, where possible.
• Perform duties of Training Faculty when required.
• Visit and assess vessels for compliance with owners / managers requirements, industry regulations and best practices.
• Under the direction of the General Manager / Team Lead, ensure all assigned jobs are delivered in line with its expectations and ensure quality standards are uniformly maintained.
• Keep up to date with national, regional, and international legislative requirements and practices to support company compliance with all relevant regulations.
• Perform tasks as per the deliverables agreed with the client.
• Interface with vessel operators to ensure vessel performance standards.

Purpose: To lead in the management of supplier’s quality performance and technical specification compliance to better meet the company’s business goal and requirements (Quality, Logistics, Technology, Cost, Service).

Key Area of Responsibilities:

• Review and approve First Article (FA) Report for product qualification
• Review and approve Supplier Change requests through the Supplier Change Request and Waiver Report submitted by the supplier to manage Change Control (Copy Exact requirement).
• Conduct part buy-off at the supplier site per customer/VDL requirements to ensure compliance before the part is delivered to VDL site.
• Review the Material Review Board (MRB) list to make a disposition on non-conforming parts and take follow-up action (for supplier-related issues).
• Review, approve, and validate actions in the Supplier Non-Conformance Report (NCR)/Corrective Action and Preventive Action (CAPA) Report to ensure the root cause is identified to actions done to eliminate the issue and prevent re-occurrence.
• Review, approve and validate actions in the Supplier 8D Report to identify the root cause and eliminate the issue to prevent re-occurrence.
• Conduct Quality Management System /Technical / Process Audit to qualify; periodic assessment to mitigate risk to Customer and VDL.
• Provide support on the Supplier Quarterly Business Review (QBR) process (Quality-related actions, indices, and feedback) to ensure alignment between critical suppliers and VDL to meet VDL requirements/targets.
• Engage in Continuous Improvement Projects (CIP) with suppliers to improve Quality and prevent Quality issues.
• Review overall supplier Quality status during Weekly Supplier Quality Department meetings to control supplier Quality and mitigate concerns.
• Present updates on Supplier performance to management and the customer focus team at the Customer Performance Forum.
• Provide support on New Product Introduction (NPI) meetings (Supplier Quality-related) to understand customer requirements and translate them to related suppliers.
• Support and participate in the company continuous improvement program.

Qualification & Experiences:

• Diploma/Degree in Mechanical Engineering/Mechatronics or other relevant qualification.
• Minimum 3 years of experience as a supplier quality engineer in the manufacturing industry.
• Certified Quality Engineer preferred
• Team player
• Good problem-solving skills
• Meticulous in details
• Proficient in advanced Microsoft Excel functions
• Good communication skills

Responsibilities:

As the Food Safety and Quality Assurance Officer, you will be responsible for ensuring the highest standards of food safety, quality, and compliance with ISO22000 for our central kitchen, supermarket counters and trading business under the subsidiary company.

Your key responsibilities include:

1. Compliance Management:

• Oversee and implement food safety and quality management systems in accordance with ISO22000.
• Conduct regular internal audits and inspections to ensure compliance with all relevant regulations and internal standards.

2. Documentation and Reporting:

• Maintain accurate records of all food safety and quality assurance activities.
• Prepare comprehensive reports for management, summarizing key performance indicators and areas for improvement.

3. Training and Development:

• Develop and deliver training programs for operation staff at the central kitchen and supermarket counters on food safety protocols and best practices.
• Keep the team informed about updates in food safety regulations and industry trends.

4. Incident Response:

• Establish and implement effective procedures for handling food safety incidents and product recalls protocols.
• Conduct thorough investigations into any breaches of food safety standards and recommend corrective actions.

5. Supplier and Vendor Management:

• Collaborate with suppliers and vendors to ensure the quality and safety of raw materials used in our production processes.
• Evaluate and approve suppliers based on established criteria.

Qualifications:

• Certification in ISO22000.
• Proven experience in food safety and quality assurance, preferably in the sushi and sashimi production industry.
• Strong knowledge of local and international food safety regulations.
• Excellent communication and training skills.

Responsibilities:

As the Food Safety and Quality Assurance Officer, you will be responsible for ensuring the highest standards of food safety, quality, and compliance with ISO22000 for our central kitchen, supermarket counters and trading business under the subsidiary company.

Your key responsibilities include:

1. Compliance Management:

• Oversee and implement food safety and quality management systems in accordance with ISO22000.
• Conduct regular internal audits and inspections to ensure compliance with all relevant regulations and internal standards.

2. Documentation and Reporting:

• Maintain accurate records of all food safety and quality assurance activities.
• Prepare comprehensive reports for management, summarizing key performance indicators and areas for improvement.

3. Training and Development:

• Develop and deliver training programs for operation staff at the central kitchen and supermarket counters on food safety protocols and best practices.
• Keep the team informed about updates in food safety regulations and industry trends.

4. Incident Response:

• Establish and implement effective procedures for handling food safety incidents and product recalls protocols.
• Conduct thorough investigations into any breaches of food safety standards and recommend corrective actions.

5. Supplier and Vendor Management:

• Collaborate with suppliers and vendors to ensure the quality and safety of raw materials used in our production processes.
• Evaluate and approve suppliers based on established criteria.

Qualifications:

• Certification in ISO22000.
• Proven experience in food safety and quality assurance, preferably in the sushi and sashimi production industry.
• Strong knowledge of local and international food safety regulations.
• Excellent communication and training skills.

Quality Lab Support Coordinator

6 months contract

About the Company:
Our client is a US healthcare and a leading global biopharmaceutical company. They have a revenue of US $40.1 billion, with more than 69,000 employees across 140 countries with a heritage of more than 125 years. Our client is committed to provide patients and customers with a reliable supply of high-quality, safe, and effective medicines and vaccines. Their global supply strategy relies on manufacturing capabilities and expertise to achieve this mission

Responsibilities:

In this role, you will be responsible for all or subset of the key responsibilities below:

• Receive, archive, retrieve and dispose retention sample, following standard work, approved procedures and regulatory requirements in timely manner.
• Maintain proper 5S and ensure inspection readiness of retention sample rooms.
• Perform assigned tasks within stipulated timeline and escalate discrepancies to Reporting Manager.
• Support laboratory supplies stock check, receiving, stock arrangement and disposal as necessary.
• Any other duties as assigned by reporting manager.

Requirements:

• GCE O Level qualification and above
• Proficient with computer software such as Microsoft Word & Excel
• The role will require the person to be able to move heavy boxes up to 15 KG during process like transfer of samples/stocks checking.
• Customer focus with strong business acumen and continuous improvement mindset.
• Critical thinking mindset with a collaborative and problem-solving attitude.
• Good communication and interpersonal skills.
• Ability to work effectively in a team-based environment.

Reg No: R22104540

EA License no: 94C3609

Job Description

1. Respond to new and existing customers for inquiries.
2. Conduct quality testing and communicate product specification issues. Conduct nonconforming material or nonconforming product analysis.
3. Participate in the root cause analysis of nonconforming goods.
4. Follow the instructed corrective actions and preventive actions by superiors.
5. Secure customer formulations.
6. Control QSHE records and documents.
7. Establish formulation and blending procedures as needed.
8. Keep retain samples of products.
9. Validate COA of raw materials received and communicate any issues to the procurement and Plant Manager. Establish, update and issue GHS SDS.
10. Create certificate of analysis (COA) of products.
11. Coordinate sample delivery as required by the customer.

Job Requirements

• Minimum Diploma/Degree in Vhemistry related fields with at east 1 year related experience
• Fresh entry level graduates
• Technical Knowledge : Microsoft Office (Basic)
• Knowledge & Skills on QC Testing

About No deviation

At No deviation, we are dedicated to delivering patient-centric solutions that revolutionize the pharmaceutical landscape. As a dynamic expert in engineering consultancy, Commissioning Qualification Validation (CQV), and Quality, Compliance, and Regulatory services, we are looking for individuals who are excited to contribute to impactful projects and drive innovation.

We believe that great things happen when Empathy, Integrity, and Transparency guide our actions. That's why we foster a culture of collaboration, inclusion, and continuous development – empowering our team members to grow personally and professionally.

Position Overview

We are looking for a QC SME who will be responsible for ensuring the successful implementation and integration of gLIMS at the site by conducting thorough gap assessments and leading the required local process adjustments.

Key Responsibilities

• Perform gap assessments at the process and Standard Operating Procedure (SOP) levels.
• Collaborate with local teams, including MSAT and production, to identify necessary changes to existing processes, documentation, and data.
• Define, coordinate, and track actions to address identified gaps in a timely manner prior to roll-out.
• Develop and update local procedures for Quality and QC as required.
• Lead efforts to consolidate consumables, suppliers, instruments, etc., to reduce data load.
• Oversee data cleansing activities to ensure data integrity and accuracy.
• Manage updates and replacements of QC lab instruments (including firmware updates) to maintain secure system connections.
• Support the Change Manager by providing information, communication, and training to shop floor staff.

Required Qualifications

• Extensive experience in Quality Control and familiarity with gLIMS process descriptions.
• Strong analytical skills to identify local gaps and propose effective solutions.
• Excellent communication and collaboration skills to work with various stakeholders.
• Experience in writing and updating local work instructions and procedures.
• Empowered to make decisions for the site/department

Why join us?

• Generous Leave Policy including Elderly Care Leave to care for aging family members, reflecting our commitment to family wellbeing.
• Comprehensive Health & Wellness Coverage: Receive robust medical and dental coverage to support your health needs.
• Professional Development Opportunities: Access continuous learning programs and resources for career growth within the company.
• Inclusive Culture: Work in an environment where innovation, collaboration, and diverse perspectives are encouraged and celebrated.
• Shape the Future: Make a real difference in the pharmaceutical industry while advancing your career.

How to apply

Are you ready to play a key role in shaping the future of pharmaceutical solutions? If you're passionate about making an impact, we want you on our team!

Please submit your resume, outlining your qualifications and experience relevant to the role, here.

Position Overview: We are seeking a dedicated and detail-oriented Quality Engineer to join our team. The successful candidate will be responsible for ensuring the quality of low voltage switchboard panels to meet industry standards and client requirements. This role requires a strong understanding of electrical systems, testing procedures, and quality assurance.

Key Responsibilities:

• Conduct comprehensive testing of low voltage switchboard panels, including insulation resistance tests, contact resistance tests, high voltage tests and function tests.
• Perform inspections and audits of electromechanical assemblies to ensure compliance with applicable standards and specifications.
• Document test results and prepare detailed reports for internal and client review.
• Collaborate with design and manufacturing teams to identify and resolve any issues or discrepancies.
• Ensure all testing equipment is calibrated and maintained in good working condition.
• Participate in continuous improvement initiatives to enhance testing processes and procedures.
• Train production staff on quality control processes and provide guidance on quality-related matters.
• Stay updated with industry standards and advancements in testing methodologies.
• Ensure the quality of products meets the required standards and specifications.
• Support onsite testing, FAT, SAT and troubleshooting activities, if necessary.

Qualifications:

• Minimum Diploma in Electrical Engineering or a related field.
• Minimum of 2 years of experience in testing low voltage switchboard panels or similar electrical equipment.
• Strong knowledge of electrical testing procedures and standards (e.g., IEC 61439).
• Proficiency in using testing equipment and tools.
• Excellent analytical and problem-solving skills.
• Strong attention to detail and accuracy.
• Good communication and teamwork skills.
• Ability to work independently and manage multiple tasks effectively.

Preferred Qualifications:

Certification in electrical testing or quality control.

Responsibilities:

• Work within the Quality Group and the Package Team and liaise with all project team members, such as Engineering, SCM Document Control and Vendor Inspection Coordinator etc.
• Participate in review Material Data sheets. development and issuance of Material Requisition/ RFQ.
• Understands and ensure quality requirements in built into the RFQs and POs documents as well as all the package specific Quality Requirements.
• Review the Technical Bid documents submitted by vendor
• Engages in the review and response to the Technical Clarification on Quality related issues
• Issues Quality Bid Technical Evaluation report for each Bid Package
• Participates in PO award recommendation
• Interfaces with the Vendor Inspection Coordinator wherever source inspection is required.

Requirements:

• Degree in Mechanical Engineering.
• Minimum of 5 years’ experience in equipment procurement for oil & gas/ offshore industries.
• Possess CompEx certified (Module 11), ISO 9001:2015 Lead Auditor, NORSOK / PED requirement, ASME / ASTM / API codes, DNV-GL codes and standards and basic knowledge of NDT

Our Addresses and Working Hours:

(Tuas Boulevard Yard)

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

Mon - Thur: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte. Ltd. and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Our company is looking for a Quality Assurance / Management Representative who will perform the following tasks:

• Manage the company's ISO9001:2015 and ISO45001:2018 systems by leading both internal and external audits.
• Monitor and analyze the company's quality and safety performance through the action plans in place.
• Keep abreast of the government requirements as well updates on the standards to ensure compliance of the company's systems and policies.
• Ensure that all statutory licenses, certificates, and inspections of the company's equipment and machinery are valid and up to date.
• Manage and monitor the company's measuring equipment and devices to ensure that they are calibrated as per the required standard of the products.
• Liaise with all external stakeholders such as government bodies (MOM, BCA, SCDF, etc) with regards to company's operation and compliance.
• Communicate with existing customers on their regular audits, non disclosure agreements, and additional requirements which may affect the company's status of being an approved vendor.
• Assist project engineers in securing Certificate of Origin (COO) and / or Preferential Certificate of Origin (PCO) for products.
• Analyze the applicable tariff to be applied for free trade agreement (FTA) purposes.

At Alcon, we are driven by the meaningful work we do to help people see brilliantly. We innovate boldly, champion progress, and act with speed as the global leader in eye care. Here, you’ll be recognized for your commitment and contributions and see your career like never before. Together, we go above and beyond to make an impact in the lives of our patients and customers. We foster an inclusive culture and are looking for diverse, talented people to join Alcon.

As an Associate I, Quality Control Lab – AS&T you are responsible in planning and establishing robust and effective laboratory systems, state of art equipment/technologies to support the product/method lifecycles. Maintaining laboratory compliance standards to be inspection ready. Drive and promote a continuous improvement culture to improve the quality and efficiency of QC workflow and processes in our Tuas facilities. In this role, a typical day will include:

Responsibilities

• Subject matter expert (SME) for the lifecycle of analytical/microbiological test methods:
  Manage and maintain the lifecycle of analytical and/or microbiological test methods, including method validation, method verification, method transfer, method troubleshooting & improvement, method performance periodic review.
  Develop/draft and execute protocols for method validation, verification, transfer and improvement within project timeline and budget. Create or update test procedure and data sheet. Coordinate and complete change requests.
  Perform data trending and analysis and monitor test method performance. Analyze data to identify unfavorable trends, investigate underlying causes, address issues with relevant stakeholders, implement effective actions and to drive improvement on the method robustness.
  Lead, manage and execute projects of small to medium scale and complexity.
  Review and assess external standard and/or regulatory requirements pertaining to quality control activities and implement necessary changes to ensure compliance.
  Develop Annual Product Quality Review (APQR) sub-reports and ensure timely submission of sub-reports without overdue.
  Site point of contact for global communities/initiatives pertaining to test method lifecycle.
  Provide guidance, coaching and training to the team as required. Conduct training for new or changed test procedures or techniques.

• General responsibilities:
  Meet quality objectives set by management & comply to Alcon, QMS and Safety requirements.
  Timely report non-conformance, out-of-specification, out-of-trend, out-of-expectation events. Lead or assist in root cause analyses for product defects and quality lapses, and take effective actions to prevent recurrence.
  Timely completion of all compliance activities without overdue, including but not limited to non-conformance investigation, OOS, CAPA, effectiveness check, change request, training, periodic review.
  Review/approve records/documents. Maintain integrity, accuracy and completeness of data and records.
  Compile data to support business and performance metrics reporting.
  Support and back up other AS&T projects/activities, including laboratory testing asset lifecycle, stability program, Laboratory Information Management System (LIMS)

• Improve quality and efficiency of QC workflows/processes:
  Drive and promote the continuous improvement culture. Challenge current processes, identify improvements and drive the effort to implement lab system/process while maintaining compliance and reducing human Intervention.

What You'll Bring to Alcon

• Bachelor Degree in Chemistry, Bioscience or Microbiology Engineering Related Study
• Experience with validation, verification, transfer of analytical test methods and/or microbiological test methods.
• 1-3 years experience in pharmaceutical/medical device industry with GMP knowledge.
• Good understanding of the industrial practices and regulatory requirements related to laboratory equipment and computerized systems.
• Experience of working in/with QC laboratory. Understand QC requirements and laboratory processes/workflow.
• Experience in leading or managing project.
• Experience with managing stability studies, metrology equipment, data analysis or data analytics is an added advantage.
• Certified greenbelt is an added advantage.

Why Join Us:

• Opportunity to work with a leading global medical device company.
• Collaborate with a diverse and talented team in a supportive work environment.
• Competitive compensation package and comprehensive benefits.
• Continuous learning and development opportunities.

Job Description & Requirements

Review the inspection history to summarize the integrity status of the plant equipment and piping systems.

· Perform the scoping work and prepare the job pack for process piping and in-service equipment based on engineering assessment and annual inspection plan.

· Plan and carry out fixed equipment/piping inspection via on-stream risk-based monitoring programs and downtime inspection activities including corrosion under Insulation (CUI) and corrosion under pipe support (CUP) on process piping and equipment according to annual maintenance plan

· Identifying the areas of special concern and deterioration (e.g. Dead legs, injection points, mix points, corrosion under insulation and Low silicon Inspection).

· Supervision and coordination of all on-stream and shutdown inspection and NDT activities for static equipment and in-service process piping.

· Review of inspection test plan, WPS and method statement for any in-service repair work of piping and pressure vessels.

· Witnessing of PT, MPI, PMI, metallographic tube testing and Hydro static test for statutory equipment.

· Provide recommendations and timely updates on equipment degradation problems.

· Provide quality assurance on project construction and maintenance works to ensure compliance with applicable codes, standards and specifications.

· Preparation of final inspection reports with all findings, abnormalities and recommendations.

· Ensure quality of inspected items to meet project requirements and standards.

· Inservice inspections in refineries / Oil and Gas / Petrochemical industries, such as corrosion under pipe support (CUPS), corrosion under insulation (CUI), Injection & Mix points inspections.

· Read, understand project related ITP, procedures, specification requirements.

· Review documents and drawings as per specification • Knowledge / experience about Piping Isometrics, P & ID, general arrangement drawings, Structural drawings, Weld Maps, welding symbols, Cutting Plans, Quality control procedures, Base Materials, and welding consumables.

· Inspection, review of mill certificates, Material verification, Inspection of Pipes, Fittings, Flanges, valves, nipples, plate tubes as per respective materials specifications, Codes, Standards & Client Specifications. Inspection / Witness & Review Stage wise activities earlier stage of spool fabrication

· Knowledge in welding inspection

Eligibility Criteria

· Graduate Engineers with 3-6 years of relevant experience.

· Relevant Engineering Degree or Diploma in Mechanical, Petroleum/Oil/Gas, Civil, Chemical or Industrial Engineering are acceptable.

· Experience in Refinery and Oil & Gas must

· Experience in QA/QC and Knowledge in Non-Destructive Testing methods.

· Knowledge/experience in welding inspection, structural fabrication, piping Isometric drawing and piping materials.

· Work Independently and can work in Singapore and other countries.

· Fluent Reading, Speaking and Writing in English.

· Willing to commit 24 months contract/ project completion.

· Team Worker, Mature, Meticulous, Pro-Active Work Attitude & Work Independent.

· Energetic & Result Orientated.

Purpose: The role is responsible for handling customer quality issues and continuous improvement activities of the Company products and processes. You are required to drive internal departments on quality-related issues to follow up on effective corrective/preventive actions. You will be liaising with the internal team to support QBR, RMA, IFR, MRB, FAI Review and approval with Supplier and customer, In-Process Audit, FA Launch, 8D, SDR, FPY, tracker processes, and communicate between customer and internal team on Quality related matters.

Key areas of responsibilities:

• Lead and drive customer quality CAB meetings to derive root causes and corrective and preventive actions based on 8D methodology
• Perform ad-hoc visits to customer sites to facilitate investigation and improvement proposal
• Develop, drive, and lead the improvement of manufacturing systems and processes to meet and exceed customer expectations
• Lead and drive company-wide continuous improvement projects with relevant Organizations
• Build and drive customer relationships to improve customer satisfaction
• Perform customer quality performance monitoring and reporting to internal management and customer
• Manage the first article process and submit the report to the customer for approval
• Lead cross-functional team to establish the outgoing inspection checklist for NPI to ensure that the product meets customer requirement
• Analyze customer quality performance to identify trends and improvement opportunities
• Perform manufacturing audit

Qualification & Experiences:

• Degree in Mechanical/Mechatronics/Electrical/Manufacturing Engineering discipline
• At least 5 years of working experience, 3 years in dealing with customer quality managers or direct customer facing, related to the manufacturing environment, preferably from the semiconductor, semiconductor equipment industry, electronics, or high-tech instrument industry
• Strong knowledge and practices in 8D, SPC, FMEA, 6-sigma methodology (Certified Black/Green Belt), and change management
• Good understanding of first-article inspection requirements and expectations
• Excellent leadership and effective communicator with all levels of associates and management
• Experienced in Minitab is an advantage
• Experienced QMS auditor

Job Descriptions:

• Management of CAPA from tracking, including follow-ups and closure.
• Management of Change Control, Deviations, from tracking, follow-ups and closure.
• Review quality process control plan, drive quality issues to root cause, corrective actions and improvements.
• Perform, document internal audits and other quality assurance activities to ensure readiness on international standards certification audits and GMP inspection.
• Coordinate and assists during customer visits and audits.
• Create, review work instructions and standard operating procedures, devise sampling procedures and directions for recording and reporting quality data.
• Review the implementation and efficiency of quality and inspection systems.
• Collect, compile statistical quality data, and analyze data to identify areas for improvement in the quality system.
• Review of analytical reports, and batch records (manufacturing and packaging).
• Perform SAP QM setting, review test results, block / unblock of finished products.
• Manage customer queries, customer satisfaction surveys, and questionnaires and other quality / regulatory purpose documentation requests.
• Investigate customer complaints and non-conformance issues.
• Consolidate data to create the annual product quality review report.
• Track quality performance and initiate quality improvement plans.
• Perform risk assessments and monitor risk management activities at quality level.
• Conduct /perform training to employees to improve GMP / international standards certification awareness and compliance.
• Perform any other duties and responsibilities as assigned from time to time.

Job Requirements:

• Minimum 3 years related work experience
• Possess experience in internal audit, validation activities, training management and batch release for API with good background on cGMP

Job description / responsibilities / activities/ tasks:

Interpret project specifications and develop project quality plan in consultation with project manager and Shell Quality Lead,

Implementation of quality assurance and control activities in accordance with the project quality plan including but not limited to:

· Establish Field QC Organization, to manage field QC group and members including assignment of EPCm and/or contractor QC Inspectors. To interview all EPCm and/or contractor QC before assignment to Project

· Coordination with EPCm (optional), other disciplines and contractor’s approval of the Field QC related documents prepared by each Contractor,

· Attend KOM & Pre-Inspection Meeting with EPCm and Contractors depending on criticality of works,

· Review Contractor documents related to quality control (E.g. ITP, WPS, PQR, test packs, NDE procedures) and ensure compliance to the Project Spec’s & applicable Code Standard,

· Organize and lead on-Site quality patrols and audits to ascertain health of Project quality systems, Control of NCR’s & Quality observation Records,

· Verify that all the required inspection and documentation are completed by the contractor / Vendor and issuance of the Inspection Release Notice (IRN) to the contractor / Vendor prior to any Site delivery,

· Perform line checking, punch-listing & killing, witnessing various types of tests such as hydrostatic & pneumatic testing and monitor coordination of Pre-commissioning, flushing activities,

· Final acceptance sign off on quality test packages

Trouble shooting of major QC related issues,

Prepare and conduct Project Lesson Learnt (LL) for projects done,

Carry out any other related duties as required, including temporary assignments in other sections within the MTAC department on site.

Qualifications/Experiences Required

Educational Qualifications:

· Diploma/ Degree in Mechanical Engineering or related discipline

Technical Qualifications:

· Valid Certified Welding Inspector (CSWIP 3.1) or equivalent

· Qualified MOM OPSOC (Supervisor) or equivalent

· ASNT qualification is a bonus

Professional Experience:

· Minimum 20 years of relevant experience in oil & gas, chemical & petrochemical industry in the below fields:

o Project Quality Management Systems

o Brownfield construction

o Civil, Steel Structure, Piping/Pipeline Construction

o Application of Protective Coatings (Organic Coatings, fireproofing)

o Non-metallic piping systems.

· Relevant experience includes:

o Set up and execution of Project Quality Plan

o Workshop and field quality assurance and control

o Leading EPCm and Contractor quality teams in flawless delivery

· Experience in Plant Turnaround Project Quality planning, preparation and execution.

· Conversant with international codes and standards such as ASME II, ASME V, ASME VIII, ASME IX, ASMEB31.1, ASME B31.3, AWS D1.1, API 1104, API 650 & 620, ASTM, SHELL DEPs

Responsibilities:

• Manage internal and external excursions (MRB or Quality Claims).
• Oversee customer data reporting.
• Conduct quality-related training sessions.
• Support customer surveys and audits.
• Lead continuous improvement activities.
• Perform other ad hoc duties as assigned.

Requirements:

• Degree in Engineering or equivalent.
• Preferably knowledgeable in Statistical Process Control (SPC) and statistical techniques.
• Auditing experience is a plus.
• Understanding of system flow and databases is an added advantage.

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Manage internal and external excursions (MRB or Quality Claims).
• Oversee customer data reporting.
• Conduct quality-related training sessions.
• Support customer surveys and audits.
• Lead continuous improvement activities.
• Perform other ad hoc duties as assigned.

Requirements:

• Degree in Engineering or equivalent.
• Preferably knowledgeable in Statistical Process Control (SPC) and statistical techniques.
• Auditing experience is a plus.
• Understanding of system flow and databases is an added advantage.

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Manage internal and external excursions (MRB or Quality Claims).
• Oversee customer data reporting.
• Conduct quality-related training sessions.
• Support customer surveys and audits.
• Lead continuous improvement activities.
• Perform other ad hoc duties as assigned.

Requirements:

• Degree in Engineering or equivalent.
• Preferably knowledgeable in Statistical Process Control (SPC) and statistical techniques.
• Auditing experience is a plus.
• Understanding of system flow and databases is an added advantage.

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Supplier Scouting (20%)
- Support potential supplier scanning.
- Support project documentation and presentation.
- Liaise with various departments/divisions on information gathering.
- Research of free trade agreements within ASEAN.

System Data & Contracts Maintenance (30%)
- Support in ensuring data quality on various purchasing tools.
- Prepare contract documents with suppliers and route for signatures.

Purchasing Support (20%)
- Provide support to other business functions with regards to enquiries about pricing, master data 
maintenance.
- Ensure documents / approvals are in place for Mitigation checks.
- Preparation and sending of mass communications to suppliers.

Purchasing Quality (30%)
- Support team members in the ISIR by checking documents for accuracy and requesting technical 
information (test reports, drawings) from suppliers.
- Create and implement Engineering Change Notifications for the ASEAN region to approve changes of 
products, manufacturing processes, materials or packaging.
- Support in releasing new products and maintaining related internal processes and systems.
- Assist investigations of customer complaints.
- Update system for certificates, audit reports, etc.
- Assist problem solving with suppliers.

Our Quality group ensures every single material inside our products is manufactured, processed, tested, packaged, stored and distributed aligned with our incredibly high standards of quality and meets all regulatory requirements. Partnering across our internal manufacturing facilities, external contract manufacturers and suppliers we create an interdependent global manufacturing network committed to deliver a compliant, reliable supply to customers and patients on time, every time, across the globe.

WHAT YOU WILL DO

Reporting to Senior Manager, Quality Control, you will be responsible for, but are not limited to:

1) Provide change control oversight for Supplier, Manufacturing, Engineering, Warehouse, Incoming Laboratories and Finished Product Laboratories in Pharm or API plants.

2) Provide Quality Operation related impact assessments for change controls. 3) Review and approve supplier, manufacturing, warehouse, facilities, utilities and analytical change controls.

4) Plan, material control for the incoming material and final product release which are impacted by change controls.

5) Review and approve validation protocols, reports and other validation related documents for manufacturing equipment’s, HVAC & utility systems, lab chambers.

6) Review and approve validation documents in compliance with validation requirements.

7) Partner with other site QA and change owner / project lead to complete the change control/project on time.

8) Support site management in continuous improvement efforts in streamlining change control practices for efficiency, consistency and compliance, e.g. Accelerate or Hoshin.

9) As a subject matter expert, be able to respond to enquiries related to QA and projects and approaches during internal and external audits and inspections, and work on audit responses and follow-up actions as needed.

10) Any other duties assigned by the manager.

WHAT YOU SHOULD HAVE

To be successful in this role, you should have good knowledge on cGMP, GDP and Quality Assurance and change control. Be passionate about teamwork and knowledge sharing, and proactive on continuous improvement. Other pre-requisites and attributes include:

1) Possess a Bachelor’s degree in Chemistry/Chemical Engineering or related Sciences, with a minimum of 3 years of experience in QA position in pharmaceutical or related industry.

2) Good knowledge and understanding of GMP and data integrity requirements. Good coaching, communication and interpersonal skills.

3) Demonstrate the ability to actively seek opportunities to continuously improve and simplify processes and procedures.

Other Personal Attributes:

• Self-motivated
• Independent
• Team Player
• Highly Approachable

WHAT YOU CAN EXPECT

• Limitless opportunities across various areas in Manufacturing; well-structured career path
• A state-of-the-art facility that delivers solution to its customers world-wide

At Alcon, we are driven by the meaningful work we do to help people see brilliantly. We innovate boldly, champion progress, and act with speed as the global leader in eye care. Here, you’ll be recognized for your commitment and contributions and see your career like never before. Together, we go above and beyond to make an impact in the lives of our patients and customers. We foster an inclusive culture and are looking for diverse, talented people to join Alcon.

As an Associate I, Quality Control Lab – AS&T you are responsible in planning and establishing robust and effective laboratory systems, state of art equipment/technologies to support the product/method lifecycles. Maintaining laboratory compliance standards to be inspection ready. Drive and promote a continuous improvement culture to improve the quality and efficiency of QC workflow and processes in our Tuas facilities. In this role, a typical day will include:

Responsibilities

• Subject matter expert (SME) for laboratory testing asset lifecycle and product stability program:
  Manage and maintain laboratory testing asset (LTA) lifecycle, including selection, procurement, qualification, performance review, re-qualification and retirement of LTA.
  Develop protocols/procedures, execute qualification and implementation of laboratory testing assets and systems, and prepare reports accordingly within project timeline and budget. Coordinate and complete change requests.
  Determine and implement optimal approach for laboratory equipment calibration, maintenance and operation. Ensure laboratory infrastructure and equipment function as intended.
  Govern the lifecycle of stability program. Responsible for protocol & report writing and data trending & analyses. Provide technical expertise pertaining to stability studies and requirements.
  Perform equipment troubleshooting. Investigate underlying causes, technical faults and issues pertaining to laboratory equipment, method or practices, and take necessary actions to resolve the problems.
  Lead, manage and execute projects of small to medium scale and complexity
  Review and assess external standard and/or regulatory requirements pertaining to quality control activities and implement necessary changes to ensure compliance.
  Develop Annual Product Quality Review (APQR) sub-reports and ensure timely submission of sub-reports without overdue.
  Site point of contact for global communities/initiatives pertaining to stability program and laboratory testing assets.
  Provide guidance, coaching and training to the team as required. Conduct training for new or changed test procedures, equipment or systems.

• General responsibilities:
  Meet quality objectives set by management & comply to Alcon, QMS and Safety requirements.
  Timely report non-conformance, out-of-specification, out-of-trend, out-of-expectation events. Lead or assist in root cause analyses for product defects and quality lapses and take effective actions to prevent recurrence.
  Timely completion of all compliance activities without overdue, including but not limited to non-conformance investigation, OOS, CAPA, effectiveness check, change request, training, periodic review.
  Review/approve records/documents. Maintain integrity, accuracy and completeness of data and records.
  Compile data to support business and performance metrics reporting.
  Support and back up other AS&T projects/activities, including test method lifecycle, stability program, Laboratory Information Management System (LIMS).
• Improve quality and efficiency of QC workflows/processes:
  Drive and promote the continuous improvement culture. Challenge current processes, identify improvements and drive the effort to implement lab system/process while maintaining compliance and reducing human Intervention.

What You'll Bring to Alcon

• Bachelor Degree in Chemistry, Bioscience or Microbiology Engineering Related Study
• Experience with laboratory equipment qualification, maintenance and troubleshooting, and computerized system validation.
• 1-3 years experience in pharmaceutical/medical device industry with GMP knowledge.
• Good understanding of the industrial practices and regulatory requirements related to laboratory equipment and computerized systems.
• Experience of working in/with QC laboratory. Understand QC requirements and laboratory processes/workflow.
• Experience in leading or managing project.
• Experience with managing stability studies, metrology equipment, data analysis or data analytics is an added advantage.
• Certified greenbelt is an added advantage.

Why Join Us:

• Opportunity to work with a leading global medical device company.
• Collaborate with a diverse and talented team in a supportive work environment.
• Competitive compensation package and comprehensive benefits.
• Continuous learning and development opportunities.

Responsibilities:

• Manage internal and external excursions (MRB or Quality Claims).
• Oversee customer data reporting.
• Conduct quality-related training sessions.
• Support customer surveys and audits.
• Lead continuous improvement activities.
• Perform other ad hoc duties as assigned.

Requirements:

• Degree in Engineering or equivalent.
• Preferably knowledgeable in Statistical Process Control (SPC) and statistical techniques.
• Auditing experience is a plus.
• Understanding of system flow and databases is an added advantage.

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Manage internal and external excursions (MRB or Quality Claims).
• Oversee customer data reporting.
• Conduct quality-related training sessions.
• Support customer surveys and audits.
• Lead continuous improvement activities.
• Perform other ad hoc duties as assigned.

Requirements:

• Degree in Engineering or equivalent.
• Preferably knowledgeable in Statistical Process Control (SPC) and statistical techniques.
• Auditing experience is a plus.
• Understanding of system flow and databases is an added advantage.

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

1. Training Program Strategy and Development

• Develop and implement a comprehensive global training strategy aligned with business objectives.
• Design and oversee the development of training programs for various departments, including GMP, quality, regulatory etc.
• Ensure training materials are up-to-date, engaging, and compliant with regulatory requirements.
• Implement innovative training methodologies, including e-learning, virtual reality, and blended learning approaches.
• Select and manage external training vendors and consultants.
• Ensure external training solutions meet company standards and regulatory requirements.

2. Regulatory Compliance

• Ensure all training programs meet GxP requirements and other relevant regulations
• Stay informed about industry trends and regulatory changes affecting pharmaceutical training
• Participate in regulatory inspections and audits related to training

3. Quality Management

• Integrate training initiatives with the company's quality management system
• Develop and maintain SOPs related to training processes
• Implement quality metrics to measure the effectiveness of training programs

4. Learning Management System (LMS) Oversight

• Oversee the implementation and management of the company's LMS
• Ensure proper documentation and tracking of all training activities
• Utilize LMS data to generate reports and analytics for continuous improvement

5. Cross-functional Collaboration

• Collaborate with leadership team to identify and address organizational training needs
• Work closely with Quality Assurance, Regulatory Affairs, Human Resources, and other departments to align training initiatives
• Collaborate with subject matter experts to develop technically accurate training content

6. Budget and Resource Management

• Manage the training department budget
• Lead and mentor a team of training management quality professionals across multiple sites
• Allocate resources effectively across global training initiatives

7. Continuous Improvement

• Regularly assess the effectiveness of training programs and implement improvements
• Stay updated on adult learning theories and innovative training technologies
• Establish forums for knowledge sharing and best practice exchange across global sites

About No deviation

At No deviation, we are dedicated to delivering patient-centric solutions that revolutionize the pharmaceutical landscape. As a dynamic expert in engineering consultancy, Commissioning Qualification Validation (CQV), and Quality, Compliance, and Regulatory services, we are looking for individuals who are excited to contribute to impactful projects and drive innovation.

We believe that great things happen when Empathy, Integrity, and Transparency guide our actions. That's why we foster a culture of collaboration, inclusion, and continuous development – empowering our team members to grow personally and professionally.

Position Overview

We are looking for a QC Lab Subject Matter Expert (SME) responsible for the precise setup and loading of master data into gLIMS, in compliance with global guidelines and data principles. This role is vital to maintaining data integrity and developing local support frameworks for continuous data management.

Key Responsibilities

• Execute local master data setup and loading in accordance with global guidelines and data principles.
• Populate the global LIMS system with all required initial master data, including consumables, sampling plans, specifications, parameter lists, test methods, and LES templates.
• Perform local data cleansing to ensure the quality and accuracy of the data.
• Create local work instructions to outline the implementation of global processes at the site level.
• Potential opportunity to transition into a permanent position within the local LIMS Office, offering continuous master data support.

Required Qualifications

• Experience in data management and familiarity with master data setup and loading processes.
• Strong attention to detail and analytical skills to ensure data accuracy and quality.
• Ability to develop clear and concise local work instructions.
• Knowledge of QC lab operations and related data requirements.
• Proficiency in using LIMS or similar data management system.

Why join us?

• Generous Leave Policy including Elderly Care Leave to care for aging family members, reflecting our commitment to family wellbeing.
• Comprehensive Health & Wellness Coverage: Receive robust medical and dental coverage to support your health needs.
• Professional Development Opportunities: Access continuous learning programs and resources for career growth within the company.
• Inclusive Culture: Work in an environment where innovation, collaboration, and diverse perspectives are encouraged and celebrated.
• Shape the Future: Make a real difference in the pharmaceutical industry while advancing your career.

How to apply

Are you ready to play a key role in shaping the future of pharmaceutical solutions? If you're passionate about making an impact, we want you on our team!

Please submit your resume, outlining your qualifications and experience relevant to the role, here.