Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

We are seeking an enthusiastic PhD. candidate who can perform experiments (e. g., e-beam lithography, photo-lithography, top-down fabrication techniques, design/building optical characterization setups) and numerical simulations (e.g., FDTD, RCWA, and so on).

Qualifications

• Possess a Ph.D. Degree in either Electrical or Mechanical Engineering.
• Qualified experimental, simulations skills.
• Open to Fixed Term Contract

Senior/Staff Nurse, Radiology Clinic

You are responsible for providing specialised direct and indirect nursing care and patient education through management, coordination and evaluation of care activities for patients undergoing radiological procedures. To provide guidance and direction to staff nurses and below, in order to provide optimal care to meet desired patient outcomes and experiences

Job Description:

• Perform objective assessment, evaluation and documentation of patients’ condition
• Perform complex procedures, both non-invasive and invasive within the scope of duties
• Ensure the safe delivery of patient pre-operatively from reception / recovery to the procedures and vice versa
• Prepare patients for Nuclear Medicine imaging such as screening patient, setting IV cannula and preparing IV medication etc.
• Ensure and maintain principles of sterility and asepsis procedures and techniques when assisting procedures

Job Requirements:

• Diploma / Degree in Nursing
• Registered Nurse with Singapore Nursing Board
• Preferably 2 years of working experience in an acute care hospital setting
• Possesses good clinical skills and knowledge
• Good interpersonal and communication skills
• Good team player
• Required to perform on-call duties

Kindly note that only shortlisted candidates will be contacted.

The Staff Nurse / Senior Staff Nurse is responsible for providing high-quality nursing care to residents in St. Andrew's Nursing Home. This role involves assessing, planning, implementing, and evaluating care plans for residents, ensuring their physical, emotional, and social well-being. The Staff Nurse / Senior Staff Nurse will also supervise and mentor junior nursing staff, participate in quality improvement initiatives, and maintain a safe and supportive environment for both residents and staff.

Key Responsibilities:

1. Resident Care:

• Assess residents’ health conditions and develop personalized care plans.
• Administer medications and treatments as prescribed by physicians.
• Monitor and record residents' vital signs and medical information.
• Provide wound care and other nursing procedures as required.
• Assist residents with activities of daily living (ADLs), including feeding, bathing, and mobility.
• Respond to medical emergencies promptly and effectively.

2. Supervision and Mentorship:

• Supervise junior nursing staff, nurse aides and healthcare assistants
• Provide guidance and mentorship to junior staff, fostering a collaborative and supportive work environment.
• Conduct regular training sessions and ensure staff are updated with current nursing practices.

3. Communication and Coordination:

• Communicate effectively with residents, families, and healthcare professionals.
• Collaborate with multi-disciplinary teams to ensure comprehensive care for residents.
• Participate in care plan meetings and provide input on residents’ care and progress.
  

4. Quality Improvement:

• Participate in quality improvement initiatives and contribute to the development of best practices.
• Ensure compliance with regulatory requirements and standards of care.
• Conduct audits and participate in continuous education programs.

5. Documentation:

• Maintain accurate and up-to-date medical records and documentation in the Healthcare System.
• Ensure all documentation meets legal and organizational standards.
• Report any changes in residents’ conditions to the appropriate healthcare professionals promptly.
  

6. Safety and Infection Control:

• Ensure a safe and clean environment for residents and staff.
• Adhere to infection control policies and procedures.
• Promote and practice proper hand hygiene and other safety protocols.
  

Qualifications:

• Registered Nurse with the Singapore Nursing Board.
• Diploma or Degree in Nursing from a recognized institution.
• Minimum of 2-3 years of nursing experience, preferably in a geriatric or long-term care setting.
• BCLS and AED certification.
• Strong clinical skills and knowledge of geriatric care.
• Excellent communication and interpersonal skills.
• Ability to work independently and as part of a team.
• Leadership and supervisory experience (for Senior Staff Nurse position).

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

The Department of Chemical and Biomolecular Engineering, National University of Singapore, is inviting applications for 1 Research Engineer (RE) position under Associate Professor Sibudjing Kawi’s group. The candidate will work on Shell research project entitled “Integrated Catalytic Plasma and Membrane Design for Low-Temperature High-Value Olefins Production from Light Hydrocarbons”.

Qualifications

Master degree in chemistry/chemical engineering in the area of catalysts, inorganic membranes and inorganic membrane reactors for high temperature reactions.
• Proven experience (with good research track record in terms of publications and/or patents) in the field of inorganic hollow fiber membrane synthesis, catalyst synthesis/characterization/testing for hydrocarbon pyrolysis and catalytic membrane reactor design.
• Strong team player skills and the ability to work harmoniously with a diverse workforce.

SingVet has expanded with a new branch at Beauty World. We are seeking dynamic individuals who align with our progressive, inclusive, and supportive culture.

Our clinic offers a range of services including consultations, surgeries (including orthopaedics), and hospitalization. We are closed on public holidays. Our facilities are equipped with advanced technology such as digital radiography with fluoroscopic capabilities, an esotate ultrasound machine, an in-house IDEXX suite (Hematology, biochemistry, SNAP tests), tonometry, PETMAP blood pressure machines, and a well-equipped surgery room.

Ideal candidates should have a genuine passion for animal care and be able to thrive in a fast-paced environment. We provide comprehensive training and mentorship for junior nurses. While prior experience is beneficial, it is not required. A minimum diploma holder required.

Apply now to be part of our growing team and contribute to our commitment to exceptional animal care!

Email CV to [email protected]

Only successful candidates will be notified.

Job Descriptions:

• Provides good practical skills and to lead a team of patient care assistants and health attendants in area assigned to.
• Provides good individual patient care and services with regards to specific nursing competencies such as doing dressings and cannulating patients.
• Displays confidence and well-versed in briefing patients prior to all radiation therapy procedures such as cannulation, CT simulation, radiation therapy treatment and post treatment.
• Displays competency in providing timely nursing advice to patients and family members.
• Assist radiation oncologists in consultations and be competent in necessary procedures.
• Offers good teamwork and be part of a radiotherapy team in the deliverance of safe and accurate support of treatment to patients within the radiotherapy department.
• Maintain and upkeep equipment and supplies such as emergency trolley, oxygen cylinders, surgical supplies, stationery and blankets.
• Coach new enrolled/ staff nurses and nursing students in learning activities.
• Ensure that high alert medications are properly stocked and stored.
• Maintain and upkeep cleanliness of the consultation rooms and work areas.
• Be knowledgeable in disposal of all matters of waste including sharps, biohazard waste and general waste.
• Contributes actively in the improvement and upgrading of holistic treatment care.

General:

• Liase with department manager, radiation oncologists, therapists and other relevant staff to facilitate ongoing departmental processes such as patient scheduling and inpatient status.
• Manages and keeps track of patients’ laboratory and imaging studies results.
• Provides proper guidance to junior personnel assigned.
• Discharges any other duties as assigned by supervisors and/ or senior manager.
• Participates in continuing education, improvement and other activities of the department.
• Adheres to the Code of Practice with regards to Nursing Board at all times.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

The Division of Family Medicine (DFM) at NUS research themes include chronic diseases, health longevity, cancer care, mental health, multimorbidity, family orientation and care coordination within the primary care setting.

We are looking to appoint a Research Fellow to support the primary care research programmes involving biostatistics. The Fellow will bring a combination of technical expertise in data science and applied statistical methods in primary care research.

The responsibilities include:

• Lead research projects that fall in DFM’s areas of interest and set up relevant research collaborations within and outside of the Division
• Provide support to other academic staff in the preparation of new grant proposals, ethics applications, manuscripts, and oral presentations
• Assist in the management of research activities including team coordination, mentoring of junior researchers, conducting research workshops and seminars
• Interact with interdisciplinary teams to build research capacity amongst our primary care partners
• Be a lead member of the research committee within DFM

Please note that this job description is not intended to be exhaustive. Duties and responsibilities outlined may be amended during appointment, in light of changing circumstances.

Qualifications

NUS offers highly competitive remuneration packages. The successful applicant will be offered an annual salary plus benefits commensurate with his or her qualifications, experience and expertise and will have access to travel support to disseminate research outcomes at international academic conferences.

The position is a 1-year full-time appointment at the academic rank of Research Fellow. An option to renew the appointment for subsequent years will depend on performance and continued funding for the project. Start date is flexible, with the position expected to commence in the first half of 2025.

Job Requirements:

• A recognized Doctoral degree in Data Science, Statistics or a closely related field with a strong post-doctoral research record
• Proven track record in handling and analyzing large healthcare dataset
• Track record of publishing in international peer-reviewed journals
• Strong communication skills in English, both written and spoken
• Strong leadership skills with the ability to work independently and as part of a multidisciplinary team
• Highly developed problem-solving skills and adept at managing complex research data
• Evidence of potential to generate and maintain an independent stream of funding
• Outcome-orientation with excellent organizational and project management skills, and attention to detail

The application should include a CV and a cover letter that describes the applicant’s specific interest in joining DFM. Only shortlisted candidates will be contacted.

Description:

Simple Food Solutions Pte Ltd is a dynamic OEM food manufacturing company dedicated to providing innovative and high-quality food products. We are looking for a creative and experienced Research and Development Specialist to lead our R&D efforts, drive new product development, and optimize kitchen operations.

Key Responsibilities:

1. Recipe Development and Product Innovation

• Create and test innovative recipes tailored to market trends and customer demands.

• Ensure recipes are scalable for production efficiency while maintaining exceptional quality.

2. Quality Assurance and Control (QA/QC)

• Establish and implement robust QA/QC protocols.

• Conduct product trials to ensure consistency, compliance, and safety standards.

• Resolve quality issues during development and production.

3. Product Approval and Accountability

• Oversee product approval, ensuring all items meet company standards for taste, presentation, and compliance.

• Sign off on finalized recipes and processes, assuming full accountability for product quality.

4. Collaboration with the Sales Team

• Partner with the sales team to understand customer feedback and market needs.

• Assist in presenting products to clients, including demonstrations and tastings.

• Support customization for specific customer requests.

5. Production Alignment and Management

• Collaborate with the Production Manager to align recipes with operational capabilities.

• Train production staff on new recipes and processes.

6. Market and Trend Analysis

• Research food trends, customer preferences, and competitor products to inform recipe development.

• Innovate and propose new product concepts for market differentiation.

7. Documentation and Reporting

• Maintain thorough records of recipes, ingredient specifications, and QA/QC protocols.

• Provide updates to the Production Manager and sales team on project progress and approvals.

Qualifications:

• Minimum of 5 years of culinary experience, focusing on R&D, QA/QC, or product development.

• Expertise in scaling recipes for production.

• Knowledge of food safety regulations and quality standards.

• Strong collaboration skills with production and sales teams.

• Excellent problem-solving and organizational skills.

Education:

• Degree/Diploma in Culinary Arts, Food Science, or a related field.

• Certifications in quality management or culinary innovation are a plus.

Key Competencies:

• Accountability in managing product quality, approvals, and customer satisfaction.

• Creative and innovative thinking with a strong focus on operational alignment.

• Ability to manage multiple projects within tight deadlines.

Benefits:

• Competitive salary and performance incentives.

• Opportunities for career growth and skill development.

• Collaborative and innovative work environment.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

We are seeking for suitable Research Fellow who is interested to work with Dr Prateek Bansal's research group at the National University of Singapore (NUS). The project involves understanding preferences for Mobility-as-a-Service (MaaS), estimating its effect on public transport, and quantifying system-level emission impact of MaaS.

The candidate will be responsible for:

• In-depth review of the literature.
• Designing and conducting stated preference experiments
• Developing and estimating discrete choice models
• Devising optimization-based approaches for system-level MaaS design by integrating results from discrete choice models.
• Creating an agent-based model to simulate the emission impact of MaaS

The successful applicant is expected to pursue independent as well as collaborative research and must be willing to participate in writing grant proposals and supervising doctoral/postgraduate research students.

Job Requirements

• Possess a PhD degree in Travel behaviour, Management, Economics, Statistics, Psychology or related disciplines.
• Has good understanding of discrete choice experiments and model estimation,
• Has strong background in optimization methods.
• Is proficient in programming econometric models in R, Python, or MATLAB.
• Strong written and spoken communications.
• Open to fixed-term contract.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

• The appointee is expected to work in Professor LAIN JONG Li’s research group and participate in a large-scale collaborative research with other groups in the University.
• The main research focus is to develop advanced electronics devices based on 2D semiconducting and insulating materials. The capability to initiate collaborative projects with researchers all over the world will be an advantage.
• The appointee may need to contribute to the teaching of courses in Materials Science and Engineering.
• The candidate is also expected to apply for research funding and supervise research postgraduate students.

Qualifications

• Applicants should possess a relevant PhD degree in Electronics Engineering or a related field with 3 or more years’ postdoctoral research experience
• Prior publication track records in electronic devices and low-dimensional materials will be a must.

As the Research Engineer (Equipment/Operations), you are directly involved in tool installation activities for semiconductor process tools. You would need to work proactively to coordinate with the contractor on the ground for the execution and take corrective and preventive actions of lessons learned, due diligently to prevent reoccurrence. You are responsible for performing utilities turn-on after installation is completed. You must perform the activities per ASTAR site procedure and safety policies to ensure all tool-install-related activities are completed, meeting safety, quality, schedule and budget requirements. You will also be required to perform other activities such as operations for the different semiconductor modules (Diffusion, Litho, Dry/Wet Etch, Thin Film, Implant, etc).

Responsibilities:

• Coordinate with all tool-install base contractors to execute equipment hookup for new tools, to meet the high-quality standards, dynamic schedule, and forecasted budget.
• Coordinate with the Project owner (NGTC/APM) to facilitate utility release as per the planned schedule and update tool release status timely
• Follow all safety and environmental procedures to ensure compliance with EHS-related regulations, risk assessment, safe work procedures, and permit-to-work system.
• Play an active role in safety, actively participating in safety discussions and safe work practices.
• Establish regular area walks to identify opportunities for improved safety, cleanliness, housekeeping and , efficiency
• Establish regular, working interaction with peers as well as vendors in tool installation & facilitation, communicating clearly and respectfully all relevant information.
• Keep the reporting officer informed regarding the progress of assigned work and any abnormalities observed in your area.
• Demonstrate ability to understand drawing and highlighting discrepancies
• Follow area-specific procedures and documentation
• Prioritize work tasks to meet schedule and expectations, minimum guidance
• Perform tool tool-relativities and cleanroom systems troubleshooting during the hookup phase
• To perform equipment trouble-shooting of the equipments in NGTC when the need arises
• To perform utility-on after installation completion and to work closely with LCAM for complete closure
• To perform tests balancing of exhaust for new tools whenever necessary
• To perform measures for tool consumption during the hookup phase and to work closely with LCAM
• Use methods to organize, calculate, and display data accurately for utility and flowrate measurement
• Perform site activities in accordance to the Discipline

Requirements:

• Degree/Diploma in Mechanical/Electrical/Chemical engineering or equivalent
• Semiconductor experience (Equipment & Process)
• Facilities field or Wafer Fab Manufacturing equipment background will be an advantage.
• AutoCAD

Job Description

Clinical Care

• Comply with approved standards of nursing practices
• Provide nursing services requiring specialised nursed skills
• Work closely with the resident’s doctor and multi-disciplinary team to provide care to the residents; update on changes in the residents’ conditions and needs
• Develop care plan for each resident under her/his care and ensure care delivery and nursing interventions are as outlined in the care plan
• Evaluate the resident’s response to care interventions and revise care plan as necessary
• Collaborate with allied health professionals to initiate preventive and rehabilitative nursing procedures
• Conduct and supervise assessments of all new admissions
• Prepare residents’ medical records and ensure all documentations are up to date
• Prepare and administer medications to residents, complying with safe medication practices
• Supervise staff to ensure safe and quality resident care, and in compliance to standards
• Is responsible for the safe keeping of control drugs
• Deal with emergency and incident that arises and ensure prompt action to mitigate situation. Escalate promptly to supervisor, where necessary
• Assist NM/ NC in the supervision, evaluation and disciplining of staff in her/ his team within scope of responsibility
• Promote evidence-based practices on nursing care delivery
• Assist in the plan and coordination of resident’s discharge back to the community

Quality

• Coordinate teamwork in the day-to-day operation of the ward to deliver quality service to residents and families
• Work with team to maintain a safe and clean ward environment
• Work with NM/ NC to conduct quality assurance activities to monitor and evaluate the quality and appropriateness of nursing care
• Ensure team members are familiar with the Standard Operating Procedures (SOP) and all emergency protocols
• Assist NM/ NC in quality assurance activities to monitor and evaluate the quality and appropriateness of nursing care, and implement action plan to close gaps identified or for improvements
• Participate in quality improvement initiatives and continuous improvement projects
• Assist NM/ NC to maintain systematic inventory control of assets and drugs to achieve optimal utilisation and safe storage

Training and Development

• Participate in training and development of staff
• Assist in regular and on-going assessment of nursing staff competencies to ensure achievement of targets set and/or expected competency levels
• Ensure newly joined enrolled nurse, nursing aide, health care assistant and health attendant are oriented and inducted to provide safe care to residents
• Assist the NM/ NC in identifying, planning and making decisions to meet training and developmental needs of nursing and ancillary staff

Administration

• Utilise performance management and counselling skills effectively to motivate staff to perform at their optimal level and ensure care delivered is in compliance to standards of practice
• Ensure the safe storage of all confidential files, records, documents; and that residents confidentiality is maintained at all times
• Ensure that effective and cooperative working relationships are maintained within the Nursing Department and between internal and external customer groups
• Maintain an inventory list of ward equipment and ensure regular preventive maintenance is carried out as needed
• Plan roster and involve in manpower deployment when needed
• Deputise NM/ NC in her absence

Job Requirements

• 3 years or more relevant nursing experience
• Fresh graduates are welcome to apply
• Minimum Diploma in Nursing or in related field
• 5 days work week, rotating off days
• Only require to work morning or afternoon shift

Job Description

Clinical Care

• Comply with approved standards of nursing practices
• Work closely with the resident’s doctor and multi-disciplinary team to provide care to the residents; update on changes in the residents’ conditions and needs
• Assist staff nurses (SN) to develop care plan for each resident and ensure care delivery and nursing interventions are as outlined in the care plan
• Assist in the evaluation of the resident’s response to care interventions and revision of care plan if necessary
• Assist in the assessments of all new admissions
• Prepare residents’ medical records and ensure all documentations are up to date
• Prepare and administer medications (oral and subcutaneous) to residents, complying with safe medication practices (only for those who have been assessed competent in the administration of oral and subcutaneous medicine)
• Supervise junior staff to ensure safe and quality resident care, and in compliance to standards
• Deal with emergency and incident that arises and ensure prompt action to mitigate situation. Escalate promptly to staff nurse/ supervisor, where necessary

Quality

• Work with team to maintain a safe and clean ward environment
• Participate in Quality Assurance/ Infection Control Committee to monitor and evaluate safe, quality and appropriateness of nursing care
• Participate in quality improvement initiatives and continuous improvement projects
• Is responsible to be familiar with the Standard Operating Procedures (SOP) and all emergency protocols

Training and Development

• Participate in training and development of junior staff
• Ensure newly joined nursing aide, health care assistant and health attendant are oriented and inducted to provide safe care to residents

Administration

• Ensure the safe storage of all confidential files, records, documents; and that residents confidentiality is maintained at all time
• Ensure that effective and cooperative working relationships are maintained within the Nursing Department and between internal and external customer groups
• Assist in maintaining an inventory list of ward equipment and regular maintenance
• Assist to plan roster and do manpower deployment when needed
• Assume the role of Overall in charge in the absence of RN maintenance

Job Requirements

• 3 years or more relevant nursing experience
• Fresh graduates are welcome to apply
• NITEC in Nursing or in related field
• 5 days work week, rotating off days
• Only require to work morning or afternoon shift

Company Overview:

Wilmar International Limited is Asia’s leading agribusiness group, involved in activities such as oil palm cultivation, edible oils refining, oilseeds crushing, consumer pack edible oils processing, specialty fats, oleochemicals, biodiesel manufacturing, and grains processing. With over 1,000 manufacturing plants and a vast distribution network covering China, India, Indonesia, and more than 50 other countries, Wilmar is supported by a multinational workforce of about 100,000 people.

About WIL@NUS

WIL@NUS is the joint laboratory of Wilmar International Limited and National University of Singapore. The laboratory is involved in a wide spectrum of research areas including protein production and characterization, metagenomics and host strain development. A research scientist position is currently available for the microbial host strain development and the use of microbial system for industrial applications.

Responsibilities

• Design and conduct experiments, process and analyse data
• Write research papers, patent applications, reports, reviews and summaries and communicate/present results to colleagues, external scientists and stakeholders
• Collaborate with Wilmar-related companies to apply the research findings and develop improved techniques, products or practices
• Visit factories and other Wilmar-related research and development centres to liaise future research directions
• Attend international conferences on topics of interest to Wilmar Innovation Centre
• Develop new areas of research and write proposals

Qualifications/Requirements

• Ph.D. degree in biochemistry, microbiology, molecular biology or related discipline
• Work experience in general microbiology, molecular cloning, protein expression and biochemistry, experience in genome editing is preferable
• Ability to work independently and also work effectively in a team
• Good interpersonal skills and the ability to work harmoniously with a diverse workforce

Job Description:

Be part of an exciting FAB Team working on cutting-edge advanced packaging process technologies. Partner and work with various teams in IME, to be the lead in FAB inventory management, logistic planning, and its related operations to always enable smooth operations and develop packaging solutions and taking the solutions from concept to production.

This position is based in Singapore.

Responsibilities:

• Looking for a reliable, agile, resourceful, meticulous and professional individual.
• Lead in plan, sourcing and initiate - raise purchase requests accordingly to day-to-day materials / spare parts requirements to ensure stock adequacies, required to ensure smooth Fab operations.
• Follow through the orders from the start of purchase till delivery and to ensure that goods are delivered are on time (include coordination of shipments etc. with forwarders when required etc.)
• Provide good supports on logistics and inventory movements required to enable smooth FAB cleanroom operations.
• Excellent interpersonal skills and communication skills so to work seamlessly with various stakeholders to ensure inventory adequacy and logistics efficiencies.
• Self-starter with strong ability to work with own initiative under minimal supervision.
• Process strong sense of customer service mind-set and teamwork.
• Strong flexibility and ability to handle multiple requests from across teams.
• Good communication, analytical, problem-solving skills.
• Put-up good initiatives to move forward towards systematic inventory digitalization.
• Ability to work in a multi-task environment and perform other duties assigned by Department Managers.

Experience:

• Education: Diploma in engineering discipline. Preferably in procurement, supply chain logistic/ warehouse operation.
• At least 3 years of related semiconductor engineering experiences; with good wide contacts with semiconductor material suppliers, equipment vendors.
• Relevant experience in analytics or strategic reporting will be an advantage.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

The National University of Singapore invites applications for a Research Assistant in the Department of Medicine, Yong Loo Lin School of Medicine. The Dept of Medicine at NUS is a very large research-intensive department and is dedicated to the advancement of human healthcare in Singapore first, but also beyond. More information on the department is available at https://medicine.nus.edu.sg/medi/. This Appointment will be made on a 1 year rolling contract basis in the first instance, with the possibility of extension.

Purpose of the post

The Research Assistant (RA) will be responsible to, and work closely with, the Principal Investigator (Assoc. Professor Peter Goon) and other study team members to ensure the successful completion of their research studies (Virus-associated cancers with emphases on pre-cancer detection, host immunology, virology, and potential treatments, Skin cancers and drug reactions) on time. The RA’s principal role will be to work in general practices such as recruitment, data collection, laboratory experiments, data entry and analysis.

Duties and Responsibilities

The Research Assistant will liaise with the relevant personnel in hospital to smooth the process of recruitment and data collection and will be accountable to the Principle Investigator (PI). The RA will be able to:

1. Oversee the general management of the project;
2. Provide administrative and secretarial support to the project, such as organizing regular meetings to maintain regular communication with other members of the research team and collaborate with the study sites;
3. Undertake the day to day running of the project at the study site, e.g. Collaborate with team members at the study sites, laboratory experiments, recruitment, data collection at hospitals/participants’ homes;
4. Conduct literature searches, using SPSS to enter data, and analyse data and maintain trial database, as well as assist in preparing both progress and final reports of the project;
5. Maintain the highest standard of professional conduct and record keeping in accordance with policies and procedures;
6. Assist with any other duties of a similar nature that are delegated by the PI.

Qualifications

The applicant should:

1. Have a first degree with good results or holds a Bachelor degree in medicine or science-related disciplines;
2. be able to work independently and in a team, have an investigative nature, attention to detail;
3. have knowledge of computer applications, e.g. SPSS, MS office, PowerPoint;
4. have experiences in the medicine areas of research (if confidential, the nature of the research in general)

More Information

Remuneration will be commensurate with the candidate’s qualifications and experience. Informal enquiries are welcome and should be made to Ms Farah bte Ahmad Rosman @ [email protected]

Formal application: Please submit your application, indicating current/expected salary, supported by a detailed CV (including personal particulars, academic and employment history, complete list of publications/oral presentations and full contacts of three (3) referees to this job portal.

We regret that only shortlisted candidates will be notified.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

As a Research Assistant in Urban Planning Algorithms, you will be responsible for developing innovative algorithms and formulations to address complex urban planning problems. You will work closely with urban planners, data scientists, and other stakeholders to understand the practical constraints and challenges faced in urban planning. Your role will involve:

• Developing and refining algorithms and mathematical formulations to solve urban planning problems, such as traffic flow optimization, land use allocation, and resource distribution.

• Analyzing and interpreting data from various sources, including geospatial data, demographic information, and transportation networks, to inform algorithm development.

• Collaborating with interdisciplinary teams to ensure that algorithms are practical, scalable, and aligned with the goals of urban planners

• Implementing and testing algorithms using appropriate software tools and programming languages, such as Python or R.
• Documenting your work and presenting findings to stakeholders, including urban planners, policymakers, and the public.

Qualifications

To be successful in this role, you will need to have a strong background in computer science, mathematics, or a related field, with a focus on algorithm development and optimization. Additional qualifications include:

• Proficiency in developing and refining algorithms and mathematical formulations to solve complex problems.
• Strong analytical and problem-solving skills, with the ability to think critically and creatively.
• Proficiency in programming languages such as Python, MATLAB, or R, and experience with software tools for algorithm implementation and testing.
• Strong communication skills, with the ability to explain technical concepts to non-technical stakeholders and present findings effectively.
• A commitment to collaborative work and the ability to work effectively in interdisciplinary teams.
• A Bachelor’s degree in Computer Science, Mathematics, Operations Research, or a related field

Job Description:

Be part of an exciting FAB Team working on cutting-edge advanced packaging process technologies. Partner and work with various teams in IME, to be the lead in FAB inventory management, logistic planning, and its related operations to always enable smooth operations and develop packaging solutions and taking the solutions from concept to production.

This position is based in Singapore.

Responsibilities:

• Looking for a reliable, agile, resourceful, meticulous and professional individual.
• Lead in plan, sourcing and initiate - raise purchase requests accordingly to day-to-day materials / spare parts requirements to ensure stock adequacies, required to ensure smooth Fab operations.
• Follow through the orders from the start of purchase till delivery and to ensure that goods are delivered are on time (include coordination of shipments etc. with forwarders when required etc.)
• Provide good supports on logistics and inventory movements required to enable smooth FAB cleanroom operations.
• Excellent interpersonal skills and communication skills so to work seamlessly with various stakeholders to ensure inventory adequacy and logistics efficiencies.
• Self-starter with strong ability to work with own initiative under minimal supervision.
• Process strong sense of customer service mind-set and teamwork.
• Strong flexibility and ability to handle multiple requests from across teams.
• Good communication, analytical, problem-solving skills.
• Put-up good initiatives to move forward towards systematic inventory digitalization.
• Ability to work in a multi-task environment and perform other duties assigned by Department Managers.

Experience:

• Education: Diploma in engineering discipline. Preferably in procurement, supply chain logistic/ warehouse operation.
• At least 3 years of related semiconductor engineering experiences; with good wide contacts with semiconductor material suppliers, equipment vendors.
• Relevant experience in analytics or strategic reporting will be an advantage.

Responsibilities:

• Provide professional nursing care to our clients
• Perform daily nursing duties
• Supervise care staff
• Comply to all nursing standards as stipulated by the Ministry of Health and Singapore Nursing Board
• Any other duties as assigned by the Centre Manager

Requirements:

• Registered with the Singapore Nursing Board
• Diploma/Degree in Nursing
• Minimum 3 years of post-registration experience with 1 year of supervisory capacity
• A team player
• Good interpersonal and communication skills
• Possess leadership qualities

The successful candidate will be a member of a translational team investigating and designing RNAi therapeutics for various epithelial disorders.

Responsibilities:

• Involvement in projects related to epithelial disorders.
• Perform wet lab experiments using techniques in molecular biology including immunohistochemical analysis, in situ hybridization and microscopy.
• Perform husbandry and genotyping of the laboratory’s mouse colony.
• Provide laboratory maintenance support and procurement activities.

Requirements:

• Bachelor’s degree in Life Sciences/Biomedical Sciences/Biological Sciences or related fields
• Experience in a laboratory environment.
• Willing to work with mouse models; prior experience is a plus.
• Excellent organizational and interpersonal skills and attention to details.
• Excellent oral and written communication skills.
• Highly motivated and passion for research.

As the Research Engineer (Equipment/Operations), you are directly involved in tool installation activities for semiconductor process tools. You would need to work proactively to coordinate with the contractor on the ground for the execution and take corrective and preventive actions of lessons learned, due diligently to prevent reoccurrence. You are responsible for performing utilities turn-on after installation is completed. You must perform the activities per ASTAR site procedure and safety policies to ensure all tool-install-related activities are completed, meeting safety, quality, schedule and budget requirements. You will also be required to perform other activities such as operations for the different semiconductor modules (Diffusion, Litho, Dry/Wet Etch, Thin Film, Implant, etc).

Responsibilities:

• Coordinate with all tool-install base contractors to execute equipment hookup for new tools, to meet the high-quality standards, dynamic schedule, and forecasted budget.
• Coordinate with the Project owner (NGTC/APM) to facilitate utility release as per the planned schedule and update tool release status timely
• Follow all safety and environmental procedures to ensure compliance with EHS-related regulations, risk assessment, safe work procedures, and permit-to-work system.
• Play an active role in safety, actively participating in safety discussions and safe work practices.
• Establish regular area walks to identify opportunities for improved safety, cleanliness, housekeeping and , efficiency
• Establish regular, working interaction with peers as well as vendors in tool installation & facilitation, communicating clearly and respectfully all relevant information.
• Keep the reporting officer informed regarding the progress of assigned work and any abnormalities observed in your area.
• Demonstrate ability to understand drawing and highlighting discrepancies
• Follow area-specific procedures and documentation
• Prioritize work tasks to meet schedule and expectations, minimum guidance
• Perform tool tool-relativities and cleanroom systems troubleshooting during the hookup phase
• To perform equipment trouble-shooting of the equipments in NGTC when the need arises
• To perform utility-on after installation completion and to work closely with LCAM for complete closure
• To perform tests balancing of exhaust for new tools whenever necessary
• To perform measures for tool consumption during the hookup phase and to work closely with LCAM
• Use methods to organize, calculate, and display data accurately for utility and flowrate measurement
• Perform site activities in accordance to the Discipline

Requirements:

• Degree/Diploma in Mechanical/Electrical/Chemical engineering or equivalent
• Semiconductor experience (Equipment & Process)
• Facilities field or Wafer Fab Manufacturing equipment background will be an advantage.
• AutoCAD

HYCOMBS Project is seeking a highly motivated and talented Research Fellow to join the project, a research initiative focused on advancing combustion science and technology for gas turbines and internal combustion engines in Singapore.

The successful candidate will be based in Singapore and contribute to Work Package 2.1, “Laminar H2/NH3 flames”, led by Dr. Ducruix and Dr. Minesi.

HYCOMBS PROJECT

HYCOMBS: Hydrogen and Ammonia Combustion in Singapore

In the future, Singapore may be importing renewable energy in the form of hydrogen (H2) or ammonia (NH3). These zero-carbon fuels will require the development of new gas turbines (GTs) and internal combustion engines (ICE) used in power generation, aviation, and maritime propulsion.

This project focuses on the combustion fundamentals of hydrogen, ammonia, their blends, and their blends with hydrocarbon fuels. The knowledge acquired in HYCOMBS will enable the penetration of zero-carbon fuels in the Singapore energy system and this will benefit Singaporean industries and residents.

Read more about the HYCOMBS project here.

DESCRIPTION

The HYCOMB project aims to develop a deeper understanding of hydrogen/ammonia combustion phenomena and improve the efficiency, stability, and environmental sustainability of gas turbines and internal combustion engines. As a Postdoctoral Researcher in WP2.1, you will play a key role in deploying advanced diagnostics to study laminar H2/NH3 flames, a crucial step towards understanding combustion instability and pollutant formation.

Responsibilities

• Design, develop, and operate a burner for laminar flame experiments, compatible with high-frequency diagnostics
• Conduct experiments on steady and pulsated laminar H2/NH3 flames using spontaneous emission of radicals (OH*, NH*) and laser absorption spectroscopy of stable species (NH3, H2O, N2O)
• Modulate injection conditions to induce controlled fluctuations of velocity, which will drive the oscillation of heat release, pollutant formation, and other quantities of interest
• Measure local flow conditions using Particle Image Velocimetry (PIV) to correlate flame behavior with flow strain
• Collaborate with other partners to implement laser absorption spectroscopy in other rigs and validate kinetic schemes and simulations (WP1)
• Contribute to the development of laser absorption spectroscopy diagnostics for online detection of combustion efficiency, ammonia slip, and N2O pollutant emissions

EXPERIENCE & QUALIFICATIONS

Requirements

• Ph.D. in Combustion Science, Physics, Chemistry, or a related field
• Strong background in experimental combustion, flame diagnostics, and data analysis
• Experience with optical diagnostics (ideally laser-induced fluorescence and absorption spectroscopy, but not required)
• Excellent communication and teamwork skills, with the ability to collaborate with international partners
• Fluency in English (written and spoken)

Desirable Qualifications

• Knowledge of combustion kinetics and modeling
• Experience with particle image velocimetry (PIV) or other flow measurement techniques

FURTHER INFORMATION & CONTACT

Salary range: SGD 6,900 – SGD 10,000 (depending on suitability and experience)

• A 3-year postdoctoral research position
• Visit in laboratoire EM2C (France) for a training on optical diagnostics
• The opportunity to work on a cutting-edge, interdisciplinary project with international partners
• Access to state-of-the-art experimental facilities and diagnostics in Singapore
• Collaboration with leading researchers in the field of combustion science
• Opportunities for professional growth, networking, and publication in top-tier journals

Workplace address: The applicant will be a CNRS@CREATE appointee (CREATE Campus, CREATE Tower, 1 Create Way #08-01 Singapore 138602), and work on CREATE Campus.

To apply, please submit your CV, a cover letter outlining your research experience, and contact information for two academic references. Applications will be reviewed until the position is filled: [email protected] and [email protected]

Job Description:

We are seeking a highly skilled and motivated Research Officer specializing in AI and spatial multi-omics to join our cutting-edge research team. This role focuses on advancing cancer immunotherapy (IO) for Asian-prevalent tumors through the integration of Generative AI techniques and spatial multi-omics data analysis. This position offers a unique opportunity to address critical challenges in immunotherapy, such as the identification of effective biomarkers and an in-depth understanding of the tumor microenvironment.

Key Responsibilities:

1. Multi-Omics-IO Classifier Development: Develop and validate a classifier to integrate IO biomarkers identified from the multi-omics analyses, benchmarked against conventional markers (e.g., PD-1/PD-L1).

2. AI Model Development: Create AI models for virtual staining to visualize gene expression and multi-omics biomarkers.

3. Collaboration & Reporting: Collaborate with pathologists, immunologists, and AI researchers to ensure robust, clinically relevant model development. Prepare reports, presentations, and manuscripts for publication.

Requirements:

• Bachelor degree in AI/ML, or a related field with a strong focus on imaging and deep learning.
• Technical Skills: Expertise in AI techniques and experience in omics data analysis.
• Strong programming skills in Python or R, with experience in deep learning frameworks (e.g., PyTorch, TensorFlow).
• Domain Knowledge: Familiarity with cancer immunotherapy and biomarker development.
• Analytical Skills: Proven experience in developing and evaluating complex machine learning models, especially for biomarker discovery and clinical applications.
• Collaboration & Communication: Excellent interpersonal and communication skills to work effectively within a multidisciplinary team of scientists, clinicians, and technical staff.
• Preferably with experience with virtual staining, explainable AI, and histopathological analysis. A track record of publications in high-impact journals and presentations at scientific conferences. Prior experience in developing and applying AI models in healthcare or clinical settings is a plus.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description:

About the Centre for Quantum Technologies (CQT)

The Centre for Quantum Technologies (CQT) in Singapore brings together physicists, computer scientists and engineers to do basic research on quantum physics and to build devices based on quantum phenomena. Experts in this new discipline of quantum technologies are applying their discoveries in computing, communications, and sensing.
CQT is hosted by the National University of Singapore. The Centre also has staff at the Agency for Science, Technology and Research, Nanyang Technological University, Singapore, and the Singapore University of Technology and Design. With some 200 staff and students, it offers a friendly and international work environment

Learn more about CQT at www.quantumlah.org

Job Description

We are developing an ambitious project on quantum processors based on a neutral atom array (NAA). The Visiting Associate Professor will explore numerically and experimentally sub-Doppler laser cooling as Polarization-gradient cooling, grey molasses, and Raman sideband cooling.

Job Requirements

• PhD in cold atoms gas or related topic;
• At least 4 years of experience as a research fellow or equivalent in cold atoms labs;
• Strong expertise in laser stabilisation;
• Strong expertise in experimental techniques related to cold atoms, such as: Vacuum, laser system, optics, interface.

Prof George Augustine Group: Assistant Research Officer

Serve as technician in brain research laboratory, with special emphasis on maintaining our mouse colony.

Responsibilities:

• Responsible for animal husbandry and maintenance of various transgenic mouse models. Prepare animal protocols such as drafting of IACUC amendment and SOPs for institutional approval.
• To perform molecular biology techniques, such as genotyping (DNA work), PCR and gel electrophoresis.
• Assist in daily lab activities such as preparation of buffers and administrative duties.
• Maintain accurate records of mice genotype results, experimental data, or related paperwork.

Requirements:

• BS degree in Biology, Biotechnology, or related field.
• Previous experience as lab technician desirable

Salary and benefits are commensurable to educational qualifications and working experience of the candidate. Benefits include annual leave, medical and flexi-benefits, etc.

Interested individuals should send their applicants (including a cover letter, curriculum vitae with list of publications and two referees’ contacts/ recommendation letters) to:

Prof George AUGUSTINE

Temasek Senior Investigator

Temasek Life Sciences Laboratory Ltd
Email: [email protected]

(Please note that only shortlisted candidates will be notified)