We have several available postdoctoral positions at the Singapore University of Technology and Design (SUTD) to work in the area of Robotics. This position focus on supporting the design of algorithm for various robotics applications.

Qualification:
- Relevant PhD Degree in Electrical Engineering, , Mechanical Engineering, Robotics, or related areas
- Strong hands on experience Preference will be given to those with prior robotics project experience such as:
1) SLAM;
2) ROS;
3) Sensor fusion;
4) Machine Learning;
5) Mobile platforms (eg: wheeled robots, legged robots); and
6) Manipulators

Applications, assembled as a single PDF file, should contain a complete resume, full list of publications, as well as the names and contact information of up to three references. Interested applicants may send his/her CV to Assoc/Prof U-Xuan Tan via email ( [email protected] ). Review of applications will continue until the position is filled. Only shortlisted candidates will be notified.

The School of Electrical and Electronic Engineering (EEE) invites applications for the position of Research Fellow. 

The RF will work on the assigned project to conduct the research on development of resistive circuit design. The candidate must have good experience in the areas listed below, possesses excellent skills.

Key Responsibilities:

• Development of resistive circuits design

• Test chip design and layout

• Good testing skills

Job Requirements:

• PhD degree in Electrical and Electronic Engineering or related field

• Expertise in integrated circuits design

• Test chip design and testing experience are advantages

• Proficiency in English

We regret that only shortlisted candidates will be notified.

The School of Electrical and Electronic Engineering (EEE) invites applications for the position of Research Fellow. 

We are seeking to hire a research fellow to support the research for the project titled: Harnessing Randomness and Chaos in Complex Disordered Photonic Systems - WP2 Design of high-performance spectrometer and imaging systems by tailoring non-Hermiticity. The RF will focus on the design of high-performance heterostructures by tailoring the non-Hermiticity. The researcher will mainly focus on novel designs and theorectical analysis on non-Hermiticity designs. He will also supervise the PhD and undergraduate students involved in this WP2. He/she will contribute to deliverables of fundamental knowledge and design and optimization of 1D non-Hermitian disordered photonic chip with improved transmission performance.

The research fellow will work on a project to conduct the research and coordination on Harnessing Randomness and Chaos in Complex Disordered Photonic Systems - Design of high-performance spectrometer and imaging systems by tailoring non-Hermiticity

Key Responsibilities:

• Design of high-performance heterostructures by tailoring the non-Hermiticity

• Conduct Novel designs and theorectical analysis on non-Hermiticity designs.

• Characterization of semiconductor materials.

• Perform the measurement of optoelectronic device

• Conduct the defect testing of the semiconductor materials.

• Collect and analyze the experimental data

• Manuscript preparation

• Supervise the PhD and undergraduate students involved in the project

• Work with the team members and help to prepare reports related to the project

Job Requirements:

• PhD in Physics, Optical Engineering, Material Science, or other related background.

• More than 3-years relevant research experience in synthesis and characterization of 2D materials.

• Experience in design high-performance spectrometer and imaging systems by tailoring the non-Hermiticity.

• Familiarity and direct experience in optoelectronic characterization related system and measurement.

• Experience of the photonics device fabrication in clean room.

• Substantial knowledge in on-chip photonics devices and architectures.

• A desire to work in a fast paced, collaborative environment.

• Self-motivated and good tasks initiative.

• Excellent communication and writing in English.

• Good Publication Tracking Record.

We regret that only shortlisted candidates will be notified.

We have several available research assistant positions at the Singapore University of Technology and Design (SUTD) to work in the area of Robotics. This position focus on supporting the design of algorithm for various robotics applications.

Qualification:
- Relevant Degree in Electrical Engineering, , Mechanical Engineering, Robotics, or related areas
- Strong hands on experience Preference will be given to those with prior robotics project experience such as:
1) SLAM;
2) ROS;
3) Sensor fusion;
4) Mobile platforms (eg: wheeled robots, legged robots); and
5) Manipulators

Applications, assembled as a single PDF file, should contain a complete resume, full list of publications, as well as the names and contact information of up to three references. Interested applicants may send his/her CV to Asst Prof U-Xuan Tan via email ( [email protected] ). Review of applications will continue until the position is filled. Only shortlisted candidates will be notified.

Job Summary: We are seeking a highly motivated and skilled Senior Research Assistant / Research Associate to join our team and contribute to our ongoing projects in the field of 3D reconstruction. The successful candidate will work closely with our research team to develop novel algorithms and techniques for 3D reconstruction from various data sources. This is an exciting opportunity to be involved in cutting-edge research and make a significant impact in the field.

Responsibilities:

• Conduct research in the area of 3D reconstruction, focusing on developing innovative algorithms and methodologies.
• Design and implement experiments to validate the proposed approaches.
• Analyze and interpret data obtained from different sources, including images, point clouds, and sensor data.
• Stay up-to-date with the latest advancements in 3D reconstruction and related fields, and integrate new findings into research projects.
• Prepare research papers and reports for publication in reputable conferences and journals.
• Present research findings at conferences and other relevant events.

Qualifications:

• A master degree in Computer Science, Electrical Engineering, or a related field, with a focus on computer vision, image processing, or 3D reconstruction.
• Strong background in 3D geometry, computer vision, and machine learning.
• Proficiency in programming languages such as Python, C++, or MATLAB.
• Experience with relevant software libraries and frameworks, such as OpenCV, PCL, or Pytorch.
• Solid understanding of mathematical concepts related to 3D reconstruction, including geometry, optimization, and statistical methods.
• Track record of publishing research papers in reputable conferences or journals.
• Excellent problem-solving and analytical skills.
• Strong communication skills and the ability to work effectively in a collaborative research environment.

The Singapore University of Tecnology is looking for a Research Assistant in the area of networked systems and cybersecurity. The successful applicant will work closely with a team of researchers and engineers to design and develop novel solutions for various types of networked systems (including industrial control systems and 5G systems).

Qualification & Experience:

• Bachelor's / Master's in Computer Science, Computer Engineering, or related discipline.
• Expertise in computer networks and cybersecurity.
• Research experience, technical skillset, and strong publication records in the area of networked systems, cybersecurity, or related areas.
• Strong software skills
• Ability to work well in a collaborating team setting
• Good written/oral communication skills in English

NTI-NTU Corporate Laboratory is a collaboration between Nanofilm Technologies International Limited (“Nanofilm”, “NTI”), Nanyang Technological University (“NTU”) and supported by Singapore under RIE2025. The Laboratory’s objective is to propel Innovation and Technologies commercialisation through NTU’s innovation and NTI’s deep technology. NTI-NTU Corporate Laboratory aligns with Singapore’s RIE2025 handbook – which emphasises the nation’s commitment to research and innovation, aiming to drive economic growth and address national challenges.

The Nanyang Technological University NTI-NTU Corporate Laboratory is seeking to hire a Senior Research Fellow. The selected candidate will innovate in semiconductor packaging, focusing on metallization and wafer packaging.

Key Responsibilities:

• Optimize plasma-enhanced metallization, vacuum coating processes, and leading R&D efforts in material science for device performance enhancement.

• Drive the development and implementation of advanced metallization techniques.

• Propose relevant vacuum coating solutions, conducting plasma simulations to refine processes.

• Oversee the transition from experimental designs to scalable solutions.

• Additionally, the role requires preparation and delivery of comprehensive reports to satisfy the stipulations of funding entities and corporate mandates.

Job Requirements:

• Ph.D. in a relevant engineering or science discipline is required.

• At least ten years of specialized post-doctoral experience.

• Expertise in plasma simulations (ANSYS, COMSOL) and a strong track record of research publications and successful grant applications are essential.

• Applicants must demonstrate effective collaboration skills in multidisciplinary settings.

We regret that only shortlisted candidates will be notified.

The School of Electrical and Electronic Engineering (NTU EEE) invites applications for the position of Research Associate. 

The eVTOL Research and Innovation Centre at Nanyang Technological University, Singapore, is looking for a strong candidate in the area of Thermal Management Systems.

Key Responsibilities:

• Lead the design and integration of thermal management systems for eVTOL aircraft, considering the unique challenges of electric propulsion and aerodynamics.

• Develop and implement strategies for efficient heat dissipation from critical components, including electric motors, inverters, and battery systems.

• Conduct thermal analysis and simulation to model and predict heat generation and dissipation within the aircraft systems under various flight conditions.

• Manage suppliers to select appropriate materials for thermal insulation and heat shielding, considering weight, durability, and thermal conductivity.

• Implement thermal barrier solutions to protect batteries from extreme temperatures.

• Develop and conduct lab tests, ground tests and flight tests to validate thermal management system performance under different operational scenarios.

• Generate detailed technical documentation, including specifications, thermal analysis reports, etc.

Job Requirements:

• Master’s degree in Electrical Engineering, Aerospace Engineering, or related field.

• Proven experience in thermal management system design for electric vehicles, aircraft, or similar applications.

• Proficiency in thermal analysis tools and simulation software.

• Knowledge of heat dissipation techniques, fluid dynamics, and thermodynamics.

• Strong problem-solving and analytical skills.

• Fluent English skill is a must.

We regret that only shortlisted candidates will be notified.

Aliena is a leading Singapore-based space-tech company, aiming at providing high-resolution data to terrestrial businesses by enabling a fleet of imaging satellites to fly closer to the Earth using our proprietary electric propulsion engines. In January 2022 Aliena broke the record for the smallest satellite ever to launch with a Hall plasma thruster on board.

We impact lives on Earth by bringing space closer to home. We develop low power engines that enable satellites to fly closer to Earth and provide impactful high quality data to various market segments such as banking & finance, maritime, aviation, agriculture, energy, security, and defence at an affordable rate.

Our engines are mission agnostic, and while our vision is centred around the very low earth orbit, all types of missions are welcome, in any branch of pace exploration or space economy.

By joining our dynamic and visionary team, you will take part in defining the future of Earth observation and state-of-the-art low power plasma propulsion systems.

Your responsibilities

• Perform the electrical design, simulation and analysis of power electronics circuits and systems to meet technical product requirements. The main focus will be on DC-DC power converters.
• Conduct the electrical debug, test, characterization, and validation of power electronics designs.
• Optimise the Power Processing Unit design for coupling with Aliena’s family of Hall effect thrusters. Understand the interactions between power electronics and plasma devices (internal training provided).
• Cooperate with embedded system engineers to improve the Electronic Control Unit and explore the possibility of an integrated ECU-PPU.
• Support the design of laboratory experiments to test the PPU performance coupled with different Thruster Units and power rails.
• Assist in the environmental testing of PPUs and other Aliena systems (might involve travelling abroad).
• Partner with the operations team in planning for the scale production stage of the propulsion system.
• Document and share best-practices.

Qualifications

• Degree in Electrical Engineering or related technical discipline.
• Experience in PCB design and assembly including knowledge of eCAD.

Useful experiences

· Experience in modelling, simulating, and testing of power electronics through tools like PSIM, MATLAB, ORCAD/PSPICE, LTspice, etc..

· Experience in designing and solving technical problems in the area of power and analog circuit design.

If you are not ticking all of the abovementioned qualifications, don’t you worry! We are looking forward to helping you accomplish them together with us!

Ideal profile

• Motivated self sufficient individual, aiming to improve itself as well as the company
• Hands-on approach
• Out-of-the-box problem solver
• Team player

What we offer

• Market competitive compensation
• Personal office computer
• Dynamic and inclusive work environment
• Comprehensive health coverage
• Options under the Employee Stock Option Plan

***Admin note***

Only shortlisted candidates would be contacted directly by Aliena's HR for interviews and further assessment

Responsibilities

• Key account planning, development and management
• Act as main link resource to client.
• Develop and maintain close relationship and communication with decision makers of client / CRM
• Advise senior management of client status, problems and opportunities
• Quality control of all deliverables to client
• Develop, implement, coordinate, and manage research services projects
• Develop proposal and prepare budget/cost
• Questionnaire, interview/discussion guide design
• Analyze and evaluate results
• Develop conclusion and solid recommendation
• Present and report on work from proposal to analysis stage
• Control costs/budgeting
• Ensure company processes and compliance are followed
• Responsible for morale, productivity, and efficiency of team
• Any other tasks assigned by Commercial Director