NGAP PROJECT

N-GAP: Nanophotonic GAtes with exciton-Polaritons

Many technologies and platforms have been suggested to build a quantum computer, including ions, atoms, electrons, and superconducting materials. Among these options, all-integrated photonic platforms that allow creating complex circuitry with a small footprint are very promising.

In N-GAP we will explore and exploit a hybrid state of light and matter, the excitonic polariton, to create a platform for quantum computing. Exciton polaritons, which emerge from the strong-coupling of an exciton and a photon, exhibit Kerr nonlinearities typically three orders of magnitude stronger than that found in standard photonic nonlinear crystals. The main objective of N-GAP is to further enhance the nonlinearity of the polariton systems to achieve the first experimental realisation of a deterministic CNOT gate based on polariton systems, which is the essential building block of a quantum computer.

Read more about the N-GAP project here.

DESCRIPTION

Transition metal dichalcogenides MX2 materials (where M=Mo or W, and X=Se or S) are one atom thick 2D layers containing heavy elements (e.g. Mo). These two properties render the optical properties of this material family unique, with electronic optically-active excitations that are extremely robust and that dominate their optical response even above room-temperature. Interestingly, the exciton-exciton interaction strength as well as the excitonic fermionic saturation have been measured to be larger than those predicted by the hydrogenic model describing excitons in conventional bulk semiconductors. This explains why just one single monolayer of TMD is able to display an interaction strength comparable to “thick” single and multiquantum wells. Furthermore, in TMDs this interaction strength can be further enhanced by using either Rydberg excitons, which have displayed an almost 5-times enhancement, charged excitons (i.e. trions), which have shown a factor 10 enhancement, or dipolaritons, which are built upon indirect excitons in stacks of TMDs and which have shown a ~10-fold enhancement.

In N-GAP we plan to exploit this enhanced exciton-exciton (or, equivalently, polariton-polariton) interaction strength by integrating TMDs into vertical and horizontal optical microcavities combining large quality factors and reduced mode volumes, as schematically shown in the Figure below. The research fellow will contribute to the optical spectroscopy of the microcavities paying special attention to the assessment of the polariton-polariton interaction strength under different configurations and to the analysis of the quantum properties of light interacting with such microcavities.

EXPERIENCE & QUALIFICATIONS

• Candidate must hold a PhD or equivalent University level diploma in Condensed Matter Physics and/or Photonics and/or Optoelectronics.
• Candidate must be experienced in optics and/or optical spectroscopy.
• Further experience in clean-room processing would be welcome.
• A solid knowledge of written and spoken English is mandatory.
• We expect good interpersonal skills, the ability to thrive in a diverse, multidisciplinary environment, and the ability to present work at international conferences.

FURTHER INFORMATION & CONTACT

Salary range: 106 kSGD (adjustable depending on suitability and experience)

Duration: 1 year position, renewable yearly for a maximum of three years (depending on results)

Workplace address:

Majulab (CNRS) – NTU, School of Physical & Mathematical Sciences, Nanyang Technological University, 21 Nanyang Link, Singapore 637371

Interested applicants please send your resume to:

Email : [email protected]

and

Email : [email protected]

Subject template for application by email:

NGAP – Research Fellow – Spectroscopy of 2D microcavities

Applications consisting of

– A letter of motivation

– CV

– Copies of degrees and certificates

– Two (maximum) recommendation letters

We are seeking a skilled and experienced scientist to join our dynamic team. The successful candidate will be working in a strong team developing diagnostic product. The role involves collaborating with cross-functional teams, understand the target product profile for the intended use, conducting feasibility studies, verification and validation as well ensuring designs meet technical and regulatory requirements.

Roles and Responsibilities:

• Executing Analytical Validation and Clinical Validation laboratory work
• Executing laboratory work for IVD/RUO product optimization
• Develop protein conjugation capabilities within the protein team.
• Develop protein conjugation workflows which applicable to IVD/RUO product development and scalable for large scale manufacturing
• Documentation of laboratory results as required by DxD Hub QMS and A*STAR
• Support the development of target product profile

Key Requirements:

• Bachelor’s degree in science, Biology or related experiences
• 3 - 5 years laboratory experience
• Knowledgeable in protein conjugation techniques and immunoassays
• Knowledgeable in diagnostics and basic life sciences technologies
• Experience with office management software such as MS office (Excel, Word, PowerPoint)
• Able to communicate effectively, multi-task and able work in a dynamic environment
• Works well as part of a team, yet able to work independently
• Self-driven team player who is able to work in a fast-paced environment
• Work on-site with a cross-functional team

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Research Engineer

As part of National Semiconductor Translation and Innovation Center (NSTIC), the candidate will be involved in the development of heterogeneous integration process for realizing multi-functional photonic devices. The candidate will work closely with multidisciplinary team with diverse expertise.

Responsibilities

• Develop, design, and optimize die-to-wafer bonding process employing III-V semiconductor material, Lithium Niobate on Insulator (LNOI), and Si-based material platforms.
• Design of experiments (DOE) for various Die-to-Wafer (D2W) bonding methodologies.
• Liaise between design, fabrication, and testing teams to ensure smooth process integration and device fabrication.
• Metrology, data analysis, and documentation
• Present and discuss experimental data to the team

Qualifications

• Degree in Electronics Engineering, Microelectronics, Physics, or equivalent.
• Experience in semiconductor industry is preferred. Those with strong familiarity with wafer-to-wafer and die-to-wafer bonding process may be considered for a senior position.
• Good critical thinking and problem-solving ability.
• Able to work with cross-functional team, with good communication/presentation skill.
• Able to work in a fast-paced and collaborative environment

Research Engineer

As part of National Semiconductor Translation and Innovation Center (NSTIC), the candidate will be involved in the photonic device fabrication based on Silicon-based material platforms (Silicon-on-Insulator, Silicon Nitride, Germanium (Ge), and SiGe), Lithium Niobate, and III-V semiconductor materials. The candidate will work closely with multidisciplinary team with diverse expertise.

Responsibilities

• Develop, design, and optimize integration flow for Silicon Nitride-based and Lithium Niobate-based photonic devices, including lithography, etching, deep-trench, and dicing.
• Design of experiments (DOE) for different process integration flows.
• Liaise between design, fabrication, and testing teams to ensure smooth process integration and device fabrication.
• Metrology, data analysis, and documentation
• Present and discuss experimental data to the team

Qualifications

• Degree in Electronics Engineering, Microelectronics, Physics, or equivalent.
• Experiences in semiconductor industry, preferably in silicon photonic processes.
• Good critical thinking and problem-solving ability.
• Able to work with cross-functional team, with good communication/presentation skill.
• Able to work in a fast-paced and collaborative environment

Job Description

• Connect with the recruitment company to carry out the recruitment and dismissal of employees.

• Prepare and sign employment contacts with employees.

• Develop a training plan and organize employees to carry out the training plan.

• Develop a company policy related to manpower.

• Contact and communicate with the Ministry of Manpower when necessary.

• Assist in the settlement of disputes between the company and employees.

• Process monthly payroll, CPF submission, IR21, IR8A submission.

• Responsible to employee visa and immigration process, keep tracking efficiently of expiry, cancellation, renewal, and conversion of work passes.

Requirement

• Prefer relevant working experience in HR/Payroll.

• Proficiency in Microsoft Office & BAS Cloud.

• Good knowledge in Employment Act, foreign work pass procedure.

• Good communication and interpersonal skills.

• Able to work independently.

• Multitasking.

Research Engineer

As part of National Semiconductor Translation and Innovation Center (NSTIC), the candidate will be involved in the development of heterogeneous integration process for realizing multi-functional photonic devices. The candidate will work closely with multidisciplinary team with diverse expertise.

Responsibilities

• Develop, design, and optimize die-to-wafer bonding process employing III-V semiconductor material, Lithium Niobate on Insulator (LNOI), and Si-based material platforms.
• Design of experiments (DOE) for various Die-to-Wafer (D2W) bonding methodologies.
• Liaise between design, fabrication, and testing teams to ensure smooth process integration and device fabrication.
• Metrology, data analysis, and documentation
• Present and discuss experimental data to the team

Qualifications

• Degree in Electronics Engineering, Microelectronics, Physics, or equivalent.
• Experience in semiconductor industry is preferred. Those with strong familiarity with wafer-to-wafer and die-to-wafer bonding process may be considered for a senior position.
• Good critical thinking and problem-solving ability.
• Able to work with cross-functional team, with good communication/presentation skill.
• Able to work in a fast-paced and collaborative environment

Research Engineer

As part of National Semiconductor Translation and Innovation Center (NSTIC), the candidate will be involved in the photonic device fabrication based on Silicon-based material platforms (Silicon-on-Insulator, Silicon Nitride, Germanium (Ge), and SiGe), Lithium Niobate, and III-V semiconductor materials. The candidate will work closely with multidisciplinary team with diverse expertise.

Responsibilities

• Develop, design, and optimize integration flow for Silicon Nitride-based and Lithium Niobate-based photonic devices, including lithography, etching, deep-trench, and dicing.
• Design of experiments (DOE) for different process integration flows.
• Liaise between design, fabrication, and testing teams to ensure smooth process integration and device fabrication.
• Metrology, data analysis, and documentation
• Present and discuss experimental data to the team

Qualifications

• Degree in Electronics Engineering, Microelectronics, Physics, or equivalent.
• Experiences in semiconductor industry, preferably in silicon photonic processes.
• Good critical thinking and problem-solving ability.
• Able to work with cross-functional team, with good communication/presentation skill.
• Able to work in a fast-paced and collaborative environment

- Oversee operations and cleanliness on ground

- Perform general cleaning to maintain cleanliness

- Manage customer complaints in professional manner

- Manage manpower deployment

- Conduct site inspections to ensure compliance with health and safety standards

- Prepare operations reports and other administrative duties

- Any other related duties assigned by manager

Job Description:

· Performs all duties applicable to the night shift ensuring report, premises check and other are preformed accordingly

· Liaise and communicate with the manager in charge and front desk staff with regards to night check in/out and or any other request of the tenants.

· Read all reservation correspondences prior to the guest arrival.

· Personally welcome’s guest and conduct briefing about the room and the apartment SOP the newly arrived guest

· Responds to guest comments, requests and complaints in a timely and professional manner.

· Any other duties as assigned by management.

Requirement:

· Excellent customer service skills. Able to communicate with people of different nationalities.

· Able to prepare various management reports & incident reports.

· Able to work on weekend and public holiday (when required)

· Positive attitude and proactive, able to work with the team

· Duty from 10:00pm to 8:00am / 6 days per week

· Applicant with security officer licence or WSQ Certificate in Security Operations will have added advantage.

Job Position:- Resident Technical Officer (Electrical)

Working hours

Mon - Fri (08.00 am to 5.00 pm)

Sat - (08.00 am - 12.00 pm)

Education & Qualification

• Diploma in Electrical Engineering or equivalent.
• Possess at least 5 years of relevant and practical experience on site.

Skills And Knowledge

• Strong technical knowledge to review design details and method statements.
• Ability to resolve site issues during construction.
• Familiarity with local electrical codes, regulations, and authority requirements.
• Completion of at least one safety course and ability to identify potential safety infringements.
• Ability to manage a team of Site Supervisors (for Senior Resident Engineer, Resident Engineer, and Resident Architect roles).
• Administrative skills to maintain discipline and manage personnel records.
• Good communication and interpersonal skills to work effectively as a team player.
• Diligent, methodical, and meticulous.
• Willingness to work overtime and adapt to digitalization efforts in projects.
• Keen learner and supportive of new technologies in the built environment.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

The National University of Singapore invites applications for the position of Research Fellow in the Department of Computer Science, School of Computing. The School of Computing is strongly committed to research excellence in all its dimensions: Searching for fundamental results and insights, developing novel computational solutions to a wide range of applications, building large-scale experimental systems and improving the well-being of society. We seek to play an active role both internationally and locally in the core and emerging areas of Computer Science and Information Systems.

The Research Fellow will be responsible for working closely with the Principal Investigator and lab members on topics of Quantum-Safe Security. He/she should possess experience or interest in the following research areas:

• Post-Quantum Cryptography
• Quantum-Safe Security

Job Requirements

• A PhD degree in a relevant area;
• Good publication record; and
• Experience in research.

Job Description:

Be part of an exciting team working on cutting-edge advanced packaging process technologies. Participate in process development and integration solution to enable advanced packaging process technologies in the world of mobile, IoT, consumer and high-performance computing area. Partner and work with various teams from inside and outside of IME to help develop leading-edge packaging solutions for our customers, taking the solutions from concept to mass production. Responsibilities will include assisting in operations support in clean room to make sure projects are completed successfully and delivered on time.

This position is based in Singapore.

Responsibilities:

• Operate semiconductor equipment to perform processes, measurement, and inspection of wafers. (Include equipment setup, loading and unloading of wafers)
• Monitor basic equipment/process errors and perform recovery.
• Work with internal and external parties to align for tool time, execute process sequence and collect data to feedback to integration owner.
• Logistically transport wafer lots between equipment within cleanroom and between worksites.
• Identify and address potential areas for improvements such as cycle time, utilization, and cost.
• Perform chemical change/ top-up for equipment under supervision.
• Understand and follow all Environmental, Health and Safety (EHS) procedures and requirements.
• The candidate may be required to perform shift work (Mon-Fri).

Experience:

• NiTEC or Diploma in Electrical/Mechanical/Chemical Engineering
• Basic understanding on semiconductor process is preferred
• 1-3 years of experience in semiconductor processes (Litho, Etch, CVD, PVD, Plating, Metrology etc.) will be added advantages

Job Description:

Be part of an exciting team working on cutting-edge advanced packaging process technologies. Participate in process development and integration solution to enable advanced packaging process technologies in the world of mobile, IoT, consumer and high-performance computing area. Partner and work with various teams from inside and outside of IME to help develop leading-edge packaging solutions for our customers, taking the solutions from concept to mass production. Responsibilities will include assisting in operations support in clean room to make sure projects are completed successfully and delivered on time.

This position is based in Singapore.

Responsibilities:

• Operate semiconductor equipment to perform processes, measurement, and inspection of wafers. (Include equipment setup, loading and unloading of wafers)
• Monitor basic equipment/process errors and perform recovery.
• Work with internal and external parties to align for tool time, execute process sequence and collect data to feedback to integration owner.
• Logistically transport wafer lots between equipment within cleanroom and between worksites.
• Identify and address potential areas for improvements such as cycle time, utilization, and cost.
• Perform chemical change/ top-up for equipment under supervision.
• Understand and follow all Environmental, Health and Safety (EHS) procedures and requirements.
• The candidate may be required to perform shift work (Mon-Fri).

Experience:

• NiTEC or Diploma in Electrical/Mechanical/Chemical Engineering
• Basic understanding on semiconductor process is preferred
• 1-3 years of experience in semiconductor processes (Litho, Etch, CVD, PVD, Plating, Metrology etc.) will be added advantages

A*STAR Infectious Diseases Labs (A*STAR IDL) is seeking a Laboratory Officer/ Technician (BSL-3 operations) to join us. The Laboratory Officer/ Technician will engage in day-to-day operations, housekeeping, maintenance of the high containment (BSL-3) and BSL-2 enhanced laboratories. This role will involve but is not limited to the following:

Job Responsibilities:

• Perform lab biohazard waste collection, sort, autoclave, and safe disposal.
• Liaise with biohazard waste contractor for scheduled disposal.
• Manage laboratory supplies, chemical and equipment inventory.
• Assist in coordination of the lab maintenance, calibration, repair of faulty and recertification of laboratory equipment.
• Coordinate with vendors and service providers to ensure timely delivery of lab supplies and stock checking.
• Track and manage personal protective equipment (PPE) inventory, perform regular checks, and replenish stock as needed.
• Maintain overall cleanliness and organization of the laboratories.
• Carry loads such as lab laundry and send for cleaning, drying and redistributing to storage cabinet.
• Perform ad-hoc duties as required to facilitate smooth and efficient operation of the lab.

Job Requirements:

• "N" Level/"O" Level/ITE/NITEC/Higher NITEC/Diploma.
• Minimum 2 years working experience in a BSL-2 laboratory setting.
• Experience in a high containment environment will be advantageous.
• Team player, proactive and possess good communication skills.
• Ability to work independently under minimal supervision.
• Wear PPE and don respirator to perform daily work.
• Knowledge of biohazard waste management and autoclaving procedures.
• Familiarity with research animal facility housekeeping.
• Attention to detail and strong organizational skills.
• Willing to learn and ability to follow strict safety protocols and guidelines

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Primary Objectives of Position

• Lead a team of senior / technicians to carry out scheduled Preventive Maintenance and Corrective Maintenance together on passenger trains/engineering vehicles/light rail vehicles/component/equipment as assigned by supervisor.
• Ensure the team comply with all PM & CM works and related tasks with approved work instructions, quality procedures, safety and operational procedures, and good maintenance standards.
• Plan and coordinate within the team and other teams to complete the assigned maintenance tasks within the established standard time.
• Ensure the team has the necessary qualifications and authorization to carry out daily tasks and any assigned tasks by supervisor.
• Responsible for the safety, welfare and discipline of the team.
• Responsible for the upkeep of the team equipment/tools and working environment

Major Responsibilities

• Responsible for team's quality and standards of the PM/CM works within the established standard time and be competent to carry out preventive and corrective maintenance tasks within the established standard time in accordance to work instructions and related documents, as assigned by supervisors.
• Exercise safety always, in accordance to established safety procedures.
• Responsible for the safety of self and all co-workers, inclusive of contractors.
• Demonstrate sufficient ability in diagnostic and troubleshooting electromechanical systems.
• Forecast and plan his team and resources to complete maintenance tasks and assigned tasks timely.
• Perform supporting maintenance activities such as Train Driver/Shunter, overhead crane operator, forklift driver, etc. as authorized and required by the supervisor.
• Able to work on a shift roster system in accordance with the MOM guidelines and the Collective Agreement.
• Undertake any other tasks or functions that are incidental or ancillary to the performance of the works assigned by supervisor.

*The above activities are no means exhaustive and are subjected to amendment whenever is needed.

Specific Safety Responsibilities

• Undertake daily safety checks on trains and only signs trains off as fit for service after they have been properly checked.
• Carry out repairs on trains in a safe way according to training received and only signs the work off as complete after thorough checks have been carried out.
• Undertake work in accordance with Company Rules and Procedures.
• Remains constantly vigilant for unexpected defects on trains and report them immediately to his Supervisor.

Job Specifications

• Higher Nitec (with Experience) or Diploma in Engineering (Electrical/Electronic/Mechanical/Mechatronic Engineering).
• Minimum 2 years relevant working experience in maintenance/repair/installation of electrical or mechanical equipment.
• Fresh graduate with good academic results will also be considered.
• Experience in railway environment will be an added advantage.
• Must have analytical & fault-finding skills.
• Understand at least two of electrical/electronic/air conditioning/pneumatic/mechanical system.

Attributes

• Good working attitude with strong commitment to job assignments.
• Able to communicate well with staff at all levels.
• Have good initiatives and strong trouble shooting skills.
• Demonstrates strong leadership qualities and is capable of motivating teammates
• Required to work on 3 rotating shift and required to be on 24 hours standby round the clock for any unforeseen emergency recall.

We regret to inform that only shortlisted applicants will be notified.

Responsibilities:

• Support the crewing operations in performing the schedules and planning of crew changes and follow up with relevant parties.
• Assist in travel arrangement of the mobilization and de-mobilization of the crewing staff, including Air Tickets, Visa application, hotel accommodation, etc.
• Ensure candidates are equipped with the relevant requirements (medical, competence certificate / qualification docuemnts).
• Assist on all crew issues.
• Perform data entry, recording, printing and filing duties.
• Maintain a proper and user-friendly filing and document control system for recording and tracking of all documents for the department.

Requirements:

• Minimum Diploma holder in any discipline.
• Experience: at least 1 year of relevant experience in a similar role preferably in the Maritime industry.
• Pleasant personalities mature, with good written and verbal communication and interpersonal skills.
• Proactive, take initiative and well organized.
• Able to work fast under pressure.
• Proficient with Microsoft Office Suite.
• Ability to multi-task and work independently

About Us

Green Link Digital Bank is Singapore's inaugural wholesale digital bank focusing on supply chain finance, mainly serving MSMEs and aiming to help MSMEs grow and improve digitization.

We are looking for Senior Operations Officer to grow our business.

Responsibilities

• Ensure seamless processing of transactions for Loan products, Trade Financing products, and Supply Chain Financing products.
• Processing and managing of the payment process for loan referral fees.
• Perform first level AML check for transactions, SWIFTs name screening and raise STR when required.
• Coordinate and provide oversight of overall end-to-end Supply Chain Financing operations processes.
• Responsible for examining trade financing documents in accordance with international standards and for the loan and collection of international trade financing business.
• Responsible for the anti-money laundering and anti-terrorism (AML/CFT) compliance review in the international settlement business.
• Monitor/Control all transactions received and ensure smooth delivery and achieve performance and contribute to achieving business goal.
• Ensure prompt resolution of queries and escalations from internal and external stakeholders.
• Provide support for ad-hoc projects (Run and change) on behalf of the department in relation to Loan and Trade Financing products and to participate in UAT testing.
• Ensure Loan and Trade Operations procedures and policies are being followed and deviation escalated to Management.
• Ensure operational obligations are in compliant with Bank’s KYC policy, local and global regulatory requirements.
• Provide cross functional support within the Operations department when required.
• Work with relevant stakeholders on delivery of business performance and ensure daily adherence to service level and quality standards in end-to-end delivery of services.
• Identify opportunities and initiate suggestions for improvements.

Requirements

• Bachelor's degree in Banking, Finance or equivalent.
• Minimum 4 years of prior work experience in similar function in banking industry.
• Prior experience working in a bank’s Loan Operations unit and/or in Supply Chain Financing implementation team and ability to manage programs from implementation to execution.
• In-depth knowledge in Commercial Loan products (both bilateral and syndicated), Trade Financing products, UCP/ISP rules, URDG etc.
• Strong awareness of KYC/AML regulations and full understanding of Risks and Control requirements.
• Strong working compliance knowledge in Trade Financing Due Diligence/AML requirements.
• Strong working knowledge of applicable Trade Financing products and best practices of Trade Financing processes.
• Excellent communication skills with ability to multi-task while staying detailed oriented and having effective time management skill.
• Ability to work independently while being an effective team player, with ability to manage work under pressure.
• Candidates with Trade Finance experience will be considered favorably.
• Technological orientation with proficiency in MS Excel VBA an added advantage.

About Cynapse

Cynapse is an awarded AI Software Product company specializing in Enterprise-grade Vision AI in highly challenging environments. Our software platform is leveraging cutting-edge cloud/on-premises/edge platforms, advanced computer vision algos, advanced ML concepts & models and more.

The company is led by globally renowned experts who previously headed large groups at Microsoft and Intel. The company HQ is located in Singapore (One North Area) and operates in over 10 countries.

Cynapse is looking for a talented and highly motivated Project Management Officer (PMO)/Quality Assurance (QA) Intern to join our team that delivers challenging, enterprise-scale Video Content Analytics solutions to global customers. You will conform to high standards of project planning and management, working in a cutting-edge, dynamic and professionally challenging environment.

Successful interns may be offered a full-time permanent position at cynapse at the end of the internship period.

Responsibilities
The selected candidate will be involved in one or more job items listed below, depending on management decision:

• Supporting the planning and delivery of Vision AI Software Projects/Programs in Singapore and other countries
• Support multiple ongoing projects
• Assist with the project planning, resourcing and scheduling
• Assist in ensuring that projects are delivered on time, and provide timely reports on project status and activities Assist in requirements gathering and validation, solution development and testing, deployment, UAT and solution commissioning
• With guidance, perform usage tests on software thoroughly, identifying bugs and defects.
• Evaluate different functionalities and aspects of the product and generate reports.
• Assist in communicating and managing vendors, sub-contractors, partners and other stakeholders
• Follow the company PM best practices
• Work in an Agile environment (SCRUM)

Qualifications

• Completed at least 1 year of studies as part of a Diploma/Bachelor/Master in one of the following subjects: IT/Engineering/project management
• At least 6 months of experience in managing or delivering IT project/s
• Some Experience with vendors and partner management
• Analytical Thinking
• Innovative, motivated and a quick learner, attention to detail, curiosity, and passion for technology
• Bonus: Technical background/experience with software development

Benefits

• Unique opportunity to work with a talented global team on cutting-edge technologies
• Informal and exciting work environment with flexible hours

Job Types: Full-time, Internship

Contract length: 6 months

Benefits:

• Flexible schedule

Schedule:

• Monday to Friday

Work Location: In person

Job Position:- Resident Technical Officer (M&E)

Working hours

Mon - Fri (08.00 am to 5.00 pm)

Sat - (08.00 am - 12.00 pm)

Education & Qualification

• Diploma in Mechanical Engineering or equivalent.
• Possess at least 5 years of relevant and practical experience on site.

Skills And Knowledge

• Strong technical knowledge to review design details and method statements.
• Ability to resolve site issues during construction.
• Familiarity with local mechanical & electrical codes, regulations, and authority requirements.
• Completion of at least one safety course and ability to identify potential safety infringements.
• Ability to manage a team of Site Supervisors (for Senior Resident Engineer, Resident Engineer, and Resident Architect roles).
• Administrative skills to maintain discipline and manage personnel records.
• Good communication and interpersonal skills to work effectively as a team player.
• Diligent, methodical, and meticulous.
• Willingness to work overtime and adapt to digitalization efforts in projects.
• Keen learner and supportive of new technologies in the built environment.

About Us

Green Link Digital Bank is Singapore's inaugural wholesale digital bank focusing on supply chain finance, mainly serving MSMEs and aiming to help MSMEs grow and improve digitization.

Responsibilities

• Manage the operational flow of cash transactions and services relating to cross border and local transfers initiated by Clients.
• Provide end-to-end treasury processing support for trade confirmations, settlements, and trade reconciliations.
• Manage the cash and trade investigation process in event of adverse payments events (e.g., recall of funds, late payments), and failed trades, payment disputes, trade discrepancies respectively.
• Ensure that E-payment disputes (e.g., PayNow/Fast) are handled timely.
• Monitor daily liquidity and nostro position and provide reports to stakeholders.
• Good knowledge and experienced in using different types of SWIFT messages in both MT and MX format.
• Proficient with DTCC report submission.
• Maintenance of static data in core-banking system.
• Ensure all trades booked/cash operations procedures and policies are in adherence to the Bank’s risk and compliance policies as well as all regulatory requirements. Any deviation is to be escalated timely.
• Participate in system enhancement projects and UAT testing.
• Work with relevant stakeholders on delivery of business performance and ensure adherence to service level and quality standards in end-to-end delivery of services.
• Provide cross-functional coverage where required.

Requirements

• Bachelor’s degree in Business/Finance or equivalent.
• Minimum 3 years of prior work experience in similar function in banking industry.
• Prior experience working in a bank’s Cash/Treasury Operations or relevant back-office functions.
• Prior experience working on cross-border payments, domestic, FX, MM, trade, and loans.
• Sound knowledge in International, Local and Fast/PayNow payments processing and settlement cycle.
• Strong awareness of KYC/AML regulations and full understanding of Risks and Control requirements.
• Good understanding and experience in payment innovation, payment, and deposits products.
• Good communication skills with ability to multi-task, detail oriented, and effective time management skills.
• An efficient team player working in a lean team setup while being able to take individual responsibility for the tasks assigned.
• Ability to work under pressure with tight deadlines.
• Technological orientation with proficiency in MS Excel VBA is an added advantage.
• Fresh graduates are welcome to apply.

Job Position:- Resident Technical Officer (C&S)

Working hours

Mon - Fri (08.00 am to 5.00 pm)

Sat - (08.00 am - 12.00 pm)

Education & Qualification

• Diploma in Civil Engineering or equivalent.
• Registered as Resident Technical Officer with BCA/IES/ACES.
• At least 5 years of site supervision experience as Resident Technical Officer.
• National Certificate on Construction Supervision from BCA Academy or equivalent.

Skills And Knowledge

• Strong technical knowledge to review design details and method statements.
• Ability to resolve site issues during construction.
• Familiarity with local building codes, regulations, and authority requirements.
• Completion of at least one safety course and ability to identify potential safety infringements.
• Ability to manage a team of Site Supervisors (for Senior Resident Engineer, Resident Engineer, and Resident Architect roles).
• Administrative skills to maintain discipline and manage personnel records.
• Good communication and interpersonal skills to work effectively as a team player.
• Diligent, methodical, and meticulous.
• Willingness to work overtime and adapt to digitalization efforts in projects.
• Keen learner and supportive of new technologies in the built environment.

Who are we?

We are the University of Cambridge’s presence in Singapore, Cambridge CARES. Our activities are sponsored by the National Research Foundation’s CREATE programme. Our first research programme, Cambridge Centre for Carbon Reduction in Chemical Technology (C4T), is a collaboration between University of Cambridge, Nanyang Technological University and National University of Singapore.

Our team is comprised of world-class scientists and engineers working in a vibrant, fast-paced environment with great opportunities for knowledge and skills development.

Who are we looking for?

We are looking to fill research positions in maritime decarbonisation modelling:

1) In the first, Computational Fluid Dynamics simulations of ammonia and methanol engines will be performed, leading to a better understanding of the pollutant-generation processes. In addition to excelling in handling turbulent combustion theory Extensive, experience in combustion CFD is necessary.

2) In the second, systems modelling of alternative fuels and application to real-world data from ship operations will be performed, to compare possible decarbonisation scenarios in view of realistic ship operations. A thorough understanding of lifecycle analysis, energy system modelling, and Techno-economic analysis is needed. The ability to program in languages such as Python programming would be a plus.

What skills will you need?

All positions require a PhD or equivalent research experience in a combustion topic relevant to the above areas, strong motivation to work in a multi-national collaborative team, and extensive experience with report writing, journal publications, and presentations to academic and industrial settings. Connections with industry are part of the project so the researchers will have the opportunity to collaborate with industrial R&D.

What can we offer you?

· A stimulating working environment with friendly, highly motivated colleagues

· A competitive salary in line with your skills and experience

· Comprehensive medical insurance coverage as part of your employment

Please note this post is mainly based in the CREATE Tower at NUS University Town, Singapore.

How to apply?

Please apply by uploading your CV and academic transcript to https://jobs.swagapp.com/jobs/cambridge-cares-research-fellow-mechanicalchemical-engineer-for-c4t-cn14. If you have any questions, please feel free to reach out to the HR team at [email protected].

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

Perform research in operando imaging guided materials design for sustainability

Qualifications

The successful candidate should possess the following:

• A PhD in Materials Science, Chemical Engineering, Chemistry, Physics, or related fields
• Highly motivated, committed, and capable of working independently as well as collaboratively
• Strong publication record in peer-reviewed journals
• Good communication skills in English (both written and oral)
• Prior experiences with the following will be a plus
• Optical instrumentation, single-molecule/ super-resolution microscopy, magnetic/optical tweezers, ultrafast spectroscopy, or other in-situ operando imaging tools
• Machine learning for materials discovery or quantitative image analysis, DFT calculations for catalyst design, experiences with MATLAB / Python / AutoCAD / COMSOL
• Organic synthesis, polymer chemistry, synthesis of inorganic nanomaterials, micro/nano-fabrications, genetic engineering of microorganisms
• Techno-economic analysis of sustainability technologies

For postdoctoral fellows, compensation and benefits package will be internationally competitive (including annual base salary, performance-based bonus, medical insurance and vacation leave), and will be commensurate with experiences and qualifications. Interested candidates are encouraged to email a copy of CV (with a list of publications), reprints of three selected publications, as well as contact information of 2-3 references to the NUS Career Portal.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description:

Energy Studies Institute

The Energy Studies Institute (ESI) is a research institute at the National University of Singapore seeking to advance the understanding of energy policy issues by conducting independent research and analysis. We are looking for researchers to join a multi-disciplinary team carrying out research projects on a range of energy issues that are of concern to Singapore and the region.

Job Description

Tasks may include the following:

• Conduct technical and policy reviews focusing on the global energy landscape, hydrogen economy, hydrogen technologies, and supportive policies.
• Perform techno-economic analyses on energy supply chains using mathematical tools.
• Write reports and publish articles in reputable academic journals.
• Perform administrative duties, which include organizing seminars, workshops, and conferences, along with fulfilling other responsibilities as assigned by the Head of Division or Principal Investigator.

Job Requirements

• Possess a PhD degree in energy systems modelling, engineering, or a related quantitative research field.
• Have a deep understanding of and interest in energy and environmental issues, notably the hydrogen economy, hydrogen supply chain, energy security, renewable technologies, and decarbonization strategies.
• Capable of working independently and in collaboration with team members.
• Experience in energy systems modelling, techno-economic analysis, Python programming, or life cycle analysis would be beneficial.
• Relevant practical experience in industry or government agencies within the energy and environmental sectors in Singapore would be highly valuable.
• A track record of publications in reputable journals related to energy, environment, and/or systems modeling would be an advantage.

Application Process

To apply for this position, please combine the following documents in 1 PDF and attach it under the CV column when submitting your application:

• Curriculum vitae
• A cover letter, of no more than 800 words, explaining the applicant’s past research experience and aptitude in relation to the research project

Interested candidates, please submit your application with all the required documents. Only shortlisted applicants will be notified. Shortlisted applicants may be called for interview, either in person or by zoom, as appropriate. If you have not heard from us within 3 months, you should assume that your application has not been successful.

Who are we?

We are the University of Cambridge presence in Singapore called Cambridge CARES, sponsored by the NRF CREATE program CAM.CREATE. CARES also hosts industry-funded and other agencies funded projects. Our team is comprised of world-class scientists and engineers working in a vibrant, fast-paced environment with great opportunities for knowledge and skills development.

CARES is leading a new project “Sustainable Manufacture of Molecules and Materials (SM3)”, funded by NRF CREATE programme within the Decarbonisation Grand Challenge. SM3 project is a collaboration with NTU, NUS, CARES & the University of Cambridge and EPFL. The broad aim of the project is to develop novel approaches and technologies for fully de-fossilised routes to complex functional molecules and molecular materials. The project will explore novel chemical transformations for conversion of net-zero feedstocks to building blocks typically used in pharma, agrochem and other end applications. The project will also explore novel synthetic methods for conversion of the building blocks into end-use functional molecules. Novel synthesis technologies (photoelectrochemistry, sonochemistry, mechanochemistry, etc), as well as advanced research methods (AI, chemoinformatics, high-throughput synthesis) and process metrics (LCA and technoeconomic analysis) are included in this large project.

Who are we looking for?

We are looking to fill a vacancy of a Research Fellow or a Senior Research Fellow with experience in techno-economics and object-oriented programming. The candidate would have experience in assessing engineering reports and scientific papers on novel synthesis technologies, extracting key process performance parameters. The successful candidate would also have experience in designing and performing simple experimental work in the broad area of process and reaction engineering.

What skills do you have?

Working with chemical process simulators (e.g. Aspen Plus). Coding in Python or C++. Hands-on experimental experience in building and operating chemical reactors on laboratory scale.

When is position available and for how long?

The position is available from January 2025 for 1 year in the first instance and up to 4 years in total.

What can we offer you?

· A stimulating working-environment with friendly, highly motivated colleagues.

· Opportunities to develop and implement new ideas in a creative environment.

· A competitive salary in line with your skills and experience.

· A one-year contract in the first instance, extendable following satisfactory performance.

· A comprehensive medical insurance cover as part of your employment.

Please apply by uploading your CV and academic transcript to https://jobs.swagapp.com/jobs/cambridge-cares-research-fellow-chemical-engineer-techno-economicobject-oriented-for-sm3-em. Please note that this post is mainly based in the CREATE Tower at NUS University Town, Singapore. Informal enquiries could be sent to the academic lead of the project: Dr Ewa Marek ([email protected]).