Job Description

• Perform electrical power system analysis studies including: relay coordination study, fault level study , arc flash study using ETAP software
• Perform design calculations including: cable sizing, voltage drop calculation as per code requirements and local regulations and go through with PE
• Preparation of quotation and follow up to secure purchase orders
• Consult and discuss with relevant authorities for planning and designing of power stations

Requirement

· Bachelor Degree in Electrical Engineering (Preferably NTU or NUS)

· Training on ETAP studies will be provided and fresh graduates are welcomed to apply

· Good interpersonal and communication skill.

· Team player & able to work independently

Transport is provided from 6 MRT pickup points ie Paya Lebar, Serangoon NEX, Bishan, Jurong East, Joon Koon, Woodlands

Job Description

• Oversee in-house engineering design works of ACMV system, including detailed design, heat load calculation, shop drawings, hydraulic calculation, duct/pipe sizing, equipment selection, etc.
• Manage ACMV design coordination with other trades with BIM coordination.
• Liaise with ACMV suppliers for quotation, responsible for equipment selection, technical and commercial evaluation.
• Responsible for material submittals for ACMV equipment and materials to the Consultant for approval.
• Coordinate with project schedule in organizing Purchase Order, arrange timely delivery of all ACMV equipment and materials.
• Attending technical coordination meetings with Main-con, Consultants and Employer.
• Assist Project Manager and site personnel in planning, execution, and completion of projects.
• Liaise and work closely with the Consultant, Employer, site supervisor and workers on the progress of M&E work to meet the project schedule.
• Assist in the preparation of progress payment claims and variation orders as required.
• Prepare documentation and carry out testing and commissioning, combined services testing for TOP/CSC.
• Handover of completed work activities with as built drawings and O&MM to respective authorities or clients to in timely manner and delivery with desired quality standards.
• Participate in tender preparation works for new projects.

Requirements

• Minimum bachelor’s degree in mechanical engineering
• Min 5 years Singapore-based ACMV experiences in Construction Industry.
• Proficient in AutoCAD and Revit.
• Experience and relevant knowledge in ACMV calculations including heat load, pump sizing, air flow rate, chilled water system performance, chiller sizing and configuration, fan sizing and more.
• Experience of design and coordination skill.
• Familiar to ACMV, Green Mark and fire code requirement with knowledge of basic design and necessary submission for tender bidding and construction, TOP and CSC.
• Tender Bidding and Project cost Analytical and Critical Thinking
• Proactive and willing to learn and take on new challenges.
• Experience in Consultant Company preferred.
• QP/PE, Green Mark manager or other BCA/SCDF/PUB authority certification is an advantage.

Permanent, Full Time

We are seeking candidates with:

· A diploma/degree in Marine & Offshore Engineering, Mechanical Engineering, or Electrical Engineering.

· At least 10 years of experience in Engine Repair & Maintenance.

Roles & Responsibilities

· Perform the repair, maintenance, or overhaul of marine diesel engines 2 & 4 stroke.

· Comply with all the requirements to carry out the jobs in the shipyards or anchorages.

· Lifting and shifting heavy components of engine back to the workshop for repair/reconditioning and vice-versa.

· Ensure prompt response and smooth communication with the customers

· Perform other tasks as may be assigned by the Operation Manager

Job Requirements:

· Relevant marine / mechanical / engineering qualification

· Rich hands-on experience in trouble-shooting, maintenance and repair is a must.

· Willing to work in a shipyard/anchorage environment

An attractive remuneration package and career growth opportunities await the successful candidates. Interested applicants are invited to email with detailed resumes indicating their current and expected salary.

Job Descriptions:

• Assist in maintaining and updating all the Quality Management System (QMS) Documentation
• Support the maintenance and improvement of Quality Management System
• Assist in monitoring the progress or implementation and effectiveness of Quality Management System (QMS) for relevant standards such as:

a) ISO/IEC 17020: 2012 – Inspection Body

b) ISO/IEC 17025: 2017 – Laboratory

c) ISO/IEC 17065: 2012 – Product Certification

• Assist with training in quality awareness
• Assist in keeping track of relevant quality standards, and ensure compliance and preparedness for External Audit
• Assist QA/QC Manager with Internal and External Audit
• Perform any ad-hoc duties as and when assigned

Requirements:

• Preferably a Bachelor’s Degree in Civil Engineering, Geology or equivalent
• At least two (2) years’ working experience in a similar role.
• Well-versed in quality assurance, quality control and the application of relevant accreditation standards such as ISO/IEC 17020, ISO/IEC 17025, ISO/IEC 17065 standards etc
• Excellent writing skills
• Only Singaporeans

You may send your resume / CV to email address directly: [email protected]

Job Responsibilities:

* Project Engineering, Project Planning and Project Coordination for BMS / Environmental / Water Quality System

* Develop detail proposal, specification, project plan and scheduling

* Prepare coordinating, and monitoring the assigned engineering projects

* Attend Project / site site meetings and inspections

* Provide technical support and guidance to the project team members

* Supervise daily activities such as quality, safety and project delivery carried out on site.

* Work closely with the contractors and the authorities for access, task and troubleshoot site issues.

* Manage project and monitor project progress to ensure smooth completion.

* Provide project status update to management accurately and in a timely manner.

* Attend maintenance issues during warranty period.

* Ensure safe work procedures and environmental control measures are implemented at work site.

* Handle project risk management and issues escalation.

* Prepare and manage project costing, proposal and quotations. Sourcing for material and parts

Requirement:

1. Diploma in Mechatronic / Mechanical / Electrical / Environmental.

2. Min. 2 years experience in project engineering and management

3. Possess positive attitude to learn, has initiative and independent

Interested candidates are to forward your detailed resume stating current & expected salary to [email protected].

We regret that only shortlisted candidates will be notified.

Responsibilities:

• Collaborating with Process Engineer & Engineering team to establish QC standards.
• Creating documentation for inspection criteria and quality plans.
• Collaborating with QA, Process, and Product teams to address quality issues through corrective action.
• Conducting in-process audits and final quality control audits with the Process team.

Requirements:

• Diploma in Manufacturing/Quality Engineering or equivalents.
• Minimum 1 year of working experience in Electronics Manufacturing Industry.
• Responsible for controlling Supplier Quality Assurance (SQA).
• Oversight of quality control for incoming, in-process, and outgoing products.
• Knowledgeable in ISO 9001, 14001, 13485, and 45001, and FDA requirements.
• Understanding IPC requirements in PCB assembly and quality standards for various manufacturing processes such as plastic molding, die casting, extrusion, metal stamping, and machining parts.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Ø Providing technical input during the project bidding phase including: Specification Reviews, Drawing Reviews, Instrumentation Selection and Procurement / Pricing, Prepare bidding and scope documents in relation to Electrical contractor selection Ø Manage EC&I Subcontractors Ø Mark-up and checking of drawings Ø Liaise between in-house mechanical project engineer and subcontractors Ø Witness Electrical and Instrument panel manufacturing, testing, commissioning work and assist in start-up of systems including: Instrumentation Configuration and Set Up, Troubleshooting of Electrical, Mechanical and Software Issues Ø Preparation of punch list to ensure that the contractor rectifies all items before client final commissioning and client acceptance.

Job Description:

Role Overview
We are looking for an experienced Generative AI Engineer to join our AI and Data Science team. The ideal candidate will bring deep expertise in AI and NLP, with a strong focus on Generative AI technologies, MLOps, and deploying AI solutions to address complex business challenges. This role demands a strategic thinker with the ability to drive innovation while ensuring ethical AI practices.

Roles and Responsibilities

• AI Solution Development:Design and implement cutting-edge Generative AI models and applications. Develop AI-driven tools, including conversational AI, speech recognition systems, and NLP-based solutions. Conduct research and apply advanced machine learning algorithms for real-world applications.
  
• Project Leadership:Lead cross-functional teams to deliver AI projects, ensuring alignment with business objectives. Manage the end-to-end lifecycle of AI solutions, from ideation to deployment. Collaborate with stakeholders, including clients and academia, to understand requirements and provide tailored solutions.
  
• Innovation and Research:Explore and develop new Generative AI use cases for various industries. Publish research papers and contribute to academic discourse in AI and NLP. Stay updated with the latest advancements in AI and propose relevant applications.
  
• MLOps Implementation:Establish robust MLOps pipelines to streamline model deployment and monitoring. Implement responsible AI frameworks to ensure fairness, transparency, and unbiased decision-making. Optimize AI models for performance, scalability, and reliability.
  
• Knowledge Sharing and Mentorship:Mentor junior team members and foster a collaborative environment.
  Conduct workshops and training sessions to promote AI adoption within the organization.
  

Skills and Experience Required

Technical Skills

• Expertise in Generative AI technologies and tools.
• Proficiency in NLP, MLOps, and LLMOps.
• Strong programming skills in Python and experience with libraries like TensorFlow, PyTorch, and Hugging Face.
• Experience in building conversational AI experiences using tools like Dialogflow.
• Advanced knowledge of machine learning, deep learning, and data engineering.
• Proficiency in cloud platforms, especially Google Cloud, for AI deployments.

Soft Skills

• Strong analytical and problem-solving skills.
• Excellent communication and collaboration abilities.
• Proven ability to lead and work in diverse, cross-functional teams.

Certifications (Preferred)

• Google Cloud Certified Professional Data Engineer.
• Certifications in machine learning, deep learning, and MLOps.

Experience

• Proven experience in Generative AI projects and data science roles.
• Hands-on involvement in research projects and publications in AI/NLP.
• Experience working in both industry and academic environments.

Education

• 
  
• Bachelor’s in Science, Technology, Computer Science or engineering or a related discipline.

Preferred Qualifications

• Publications in top-tier AI and NLP conferences.
• Proven track record in developing AI tools with societal impact.
• Experience in managing large-scale AI projects in a cloud environment.

This role provides a unique opportunity to work at the forefront of AI innovation, shaping impactful solutions that bridge business challenges with technical expertise. If you are passionate about driving the future of AI, we invite you to apply!

Key Responsibilities

• Fast development of analog IC physical designs, including layout drawing, DRC, LVS

• Layout extractions and analysis for IC designers

• Develop analog and/or digital library cells in various technologies (e.g. CMOS & SOI)

• Layout digital cells for various trade-offs (including speed, power, area, reliability)

• Layout analog circuits and IO circuits

• Characterize digital cell cells for timing and power analyses

• Construct test structures for validating various digital and analog cells

• Layout integration and optimization

• Advise IC designers for best layout practice

• Work with the IC design team to deliver IC physical designs

• Support the team lead for layout design integrations

Minimum Requirements

•Degree in electrical engineering or related field

• Strong experience in analog physical design, particularly bandgap, amplifier, comparator, LDO, current sensing, power switch, etc.

• Proficiency with industry-standard tools such as Cadence, Spectre, HSPICE, and Matlab

• Familiarity with CMOS, BiCMOS, and other process technologies

• Excellent problem-solving skills and ability to work in a fast-paced startup environment

• At least 3-year experience of analog layout design with at 2 IC product tapeouts.

• Some understanding of circuit analysis and implementation

• Strong expertise in power management including DC/DC converter design.

• Able to do design verifications

Job Description:

• Inspection of project sites
• Coordinate, manage, and supervise all the instrument installation and monitoring works
• Liaise and coordinate with contractor for installation and monitoring issues
• Attending site progress meetings, preparing meeting minutes and coordinating with clients
• Process and interpret monitoring readings
• Coordinate with the construction team to minimise obstruction and damage to the monitoring instruments
• Supervise and quality control in instrumentation works
• Other ad hoc duties as assigned

Requirements

• Relevant education background in Civil Engineering / Geotechnical / Geology
• Min 3 years of working experience in instrumentation and monitoring works
• Experience in LTA projects
• Senior position will be considered with relevant experience
• Only Singaporeans

You may send your resume / CV to email address directly: [email protected]

Job Description & Requirements

• Leading root cause analysis & corrective action in non-conformance investigation

• Establishing quality inspection plans, COC, procedures / work instructions / API testing

• Responsible for performing gap analysis on standards revision and revise procedure / work instructions

• Attend to customer/ supplier / internal /certification audits & technical queries.

Requirements

• Min Diploma in Mechanical Engineering or equivalent

• Min 1 year of working experience in Oil & Gas / Metal Machining Industry

• Experience in using measuring instruments such as caliper, bore gage, micrometer etc

• Able to work 5.5 workdays

2. SKILLS

Web Testing

Tactics

Game Development

Strong Attention To Detail

MetaL

Unit Testing

Investigation

Root Cause Analysis

Quality Inspection

Machining

C#

Debugging

API

Mechanical Engineering

C++

Responsibilities:

1. To supervise and manage the functions of Repacking/Containment/ICW operations and Maintenance.
2. To monitor the safe process flow and backlog level of TIW waste.
3. Ensure all staff are well trained according to OJT programme and following the safe work procedures and SOPs.
4. To ensure the effectiveness and smoothness of coordination with operation and sales team and customer service maintaining high quality of services.
5. To monitor the outgoing containment purchase budget and encourage the recycling of used containment to save cost.
6. Daily and regular inspection of the operation processes and monitor the plant 5S and TPM activities, safety and discipline at works, machineries and equipment conditions.
7. Work with Lab chemists to evaluate and develop new treatment methods and handing procedures for new and unknown wastes, and review of operation costs and regular update to management.

Requirements:

• Degree in Chemical Engineering or Chemistry
• At least 2 year relevant experience

Remuneration:

• Basic salary: $3,400 – $3,800
• Company Transport / Transport Allowance $120 if candidate possess own transport
• Working Hours: Monday to Friday: 8am to 5pm
• AWS & VB
• Sign-on bonus

Job Description:

• Analyze and evaluate existing processes, take measurements and interpret data including SCADA system operations (in line with company towards digitalization)
• Perform risk assessments
• Research, design, and develop processes to optimize productivity and workflow
• Oversee operations and maintenance of facility processes
• Determine the organization and setup of operations
• Oversee implementation of new processes and procedures
• Investigate and troubleshoot any problems that arise with processes, procedures, and operations
• Develop best practices, routines and innovative solutions to improve throughput and quality of output
• Manage cost and time constraints
• Provide process documentation and operating instructions
• Involve and perform PSM and Hazop study
• Become turn key manager to plan and execute plant shutdown

Requirements:

• At least a Bachelor in Chemical Engineering
• Min 1 years of process industry experience
• Strong working knowledge of process related standards, Process Improvement and Safety Management
• Team oriented and dynamic

Others:

• Working hours : Mon to Fri (8am to 5pm)
• Company Transport / Transport Allowance if candidate travel to work by him/herself (S$120)

Job Descriptions:

• To ensure all the maintenance works carried out systematically, efficiently & safely.
• By improving existing preventive maintenance system thus reduce maintenance cost and improve performance of equipment.
• To be the initiator and coordinator of MOC for any addition, modification and replacement in the system.
• To assist the Section Manager and Supervisor to co-ordinate and supervise the day to day activities.
• To troubleshoot Mechanical Equipment / Systems’ problems when it runs abnormally malfunction.
• To work closely with the operation team for daily, weekly and monthly maintenance programmed to maintain all equipment running efficiently, safely and smoothly.
• To train all technician and staffs on equipment maintenance and monitor the 5S and TPM activities carried out in the section.
• To assist the Section Manager to propose and implement action plans to rectify faults occurring in the system/processes.
• To be involved in new project management time to time and be responsible for document preparation and other paper works, as well as co-ordination with contractors & Vendors.
• To manage all Mechanical & electrical Instruments spare parts and tools.

Job Requirements:

• Bachelor Degree in Mechanical Engineering
• Self-motivated, able to work independently and with a team to completion of tasks

Remuneration:

• Working hours - Monday to Friday: 8am to 5pm ,Alternate Saturday: 8am to 5pm
• Company Transport / Transport Allowance $120 if possess own transport
• AWS
• Performance Bonus
• Medical Benefits
• Sign-on Bonus

• Responsible for all on-site technical and engineering matters
• Ensuring works carried out meet company's quality standards &contractual requirements
• Involved in project planning, monitoring project progress and schedule
• To co-ordinate with the client, sub-contractors on all project aspects and need be, to provide all technical and non-technical resolutions followed by documentation.
• Assisting Project Manager in monthly progress claims and monthly progress reports.
• Ensuring supervisors & foremen meets client &regulatory work requirements.
• Ensuring Environmental, Safety and Health practices are carried out at all times.

Job Requirements

• Min 3 years in precast work planning, coordination is a must.
• Degree in Civil or Structural Engineering recognized by Professional Engineers Board Singapore or Building Construction Authority Singapore is a must.
• Min 3-5 years of Civil Engineering Experience
• Required skill(s): Precast will be preferred.
• Proficient in Microsoft Office
• Organised, meticulous with positive work attitude
• Good interpersonal and analytical skills
• BCSS or equivalent
• Able to start work on short notice
• Candidates will also be considered for Project Engineer (Planning- Civil Engineering) position based on education level and working experience.

Responsibilities:

Project Planning & Coordination

• Collaborate with project managers to define project scope, goals, and deliverables.
• Develop detailed project plans, including timelines, budgets, and resource allocation.
• Coordinate with internal teams and external stakeholders to align on project requirements.

Technical Oversight

• Review and interpret technical drawings, specifications and contracts.
• Provide engineering solutions to technical challenges and ensure compliance with industry standards.
• Oversee procurement and ensure materials meet project specifications.

Take-Off and Budget Management

• Prepare accurate Bills of Quantities (BQ) and cost estimates for projects.
• Conduct quantity take-offs from technical drawings and specifications.
• Monitor project costs, manage budgets and implement cost control measures to minimize overruns.

Tendering Assistance

• Support the tendering process by preparing bid documents, reviewing contractor bids, and evaluating technical and financial submissions.
• Assist in drafting and reviewing contracts and agreements.
• Work closely with procurement teams to ensure alignment with project goals and timelines.

Project Execution

• Monitor project progress, ensuring adherence to quality standards, timelines, and budgets.
• Manage changes to the project scope, schedule, and costs through appropriate processes.
• Conduct site visits to oversee construction, installations, or implementations as required.

Communication & Reporting

• Act as the point of contact between clients, contractors, and other stakeholders.
• Prepare and present regular progress reports, technical updates, and cost analyses.
• Address and resolve project-related issues and conflicts.

Risk Management

• Identify potential project risks and develop mitigation plans.
• Ensure safety protocols and compliance with environmental regulations.

Requirements:

• Bachelor’s degree in Engineering (Civil, Mechanical, Electrical, or related field).
• Preferable 3 years experience in project management or engineering roles in oil and gas industry.
• Strong knowledge of engineering principles, budget control, and tendering processes.
• Excellent communication, problem-solving and leadership skills.
• Proficiency in project management software (e.g., MS Project, Primavera), Excel Worksheet, Word Document, Power Point Presentation, AutoCAD, cost estimation tools and BQ preparation software.
• Experience in tender evaluation and contract management.
• Strong organizational and multitasking abilities.
• Wiling to work at project sites and may require extended hours to meet deadlines.
• This role is well-suited for a detail-oriented professional with expertise in project costing, budget management, and tendering who is passionate about engineering project delivery.

Job Description

• Responsible for all on-site technical and engineering matters
• Ensuring works carried out meet company's quality standards & contractual requirements
• Involved in project planning, monitoring project progress and schedule
• To co-ordinate with the client, sub-contractors on all project aspects and need be, to provide all technical and non-technical resolutions followed by documentation.
• Assisting Project Manager in monthly progress claims and monthly progress reports.
• Ensuring supervisors & foremen meets client & regulatory work requirements.
• Ensuring Environmental, Safety and Health practices are carried out at all times.

Job Requirements

• Min 3 years in Project planning, coordination is a must.
• Degree in Civil or Structural Engineering recognized by Professional Engineers Board Singapore or Building Construction Authority Singapore is a must.
• Min 3-5 years of Civil Engineering Experience
• Required skill(s): Precast will be preferred.
• Proficient in Microsoft Office
• Organised, meticulous with positive work attitude
• Good interpersonal and analytical skills
• BCSS or equivalent
• Able to start work on short notice
• Candidates will also be considered for Project Engineer (Planning- Civil Engineering) position based on education level and working experience.

Job Description

• Responsible for all on-site technical and engineering matters
• Ensuring works carried out meet company's quality standards & contractual requirements
• Involved in project planning, monitoring project progress and schedule
• To co-ordinate with the client, sub-contractors on all project aspects and need be, to provide all technical and non-technical resolutions followed by documentation.
• Assisting Project Manager in monthly progress claims and monthly progress reports.
• Ensuring supervisors & foremen meets client & regulatory work requirements.
• Ensuring Environmental, Safety and Health practices are carried out at all times.

Job Requirements

• Min 3 years in Project planning, coordination is a must.
• Degree in Civil or Structural Engineering recognized by Professional Engineers Board Singapore or Building Construction Authority Singapore is a must.
• Min 3-5 years of Civil Engineering Experience
• Required skill(s): Precast will be preferred.
• Proficient in Microsoft Office
• Organised, meticulous with positive work attitude
• Good interpersonal and analytical skills
• BCSS or equivalent
• Able to start work on short notice
• Candidates will also be considered for Project Engineer (Planning- Civil Engineering) position based on education level and working experience.

• To plan, coordinate and execute quality assurance and quality control of project.
• To ensure all products are executed in accordance to contract specifications.
• To liaise and coordinates with suppliers / sub-contractors to ensure quality control.
• Facilitate in monitoring material status updates and traceability records while maintaining scheduled workload.
• To conduct QC inspection and record on all the incoming materials.
• To record all inspection results in the appropriate inspection records.
• To highlight to superiors all non-conformities found during inspections.
• Facilitate on off-site inspection/ sampling / testing and submission of materials
• Maintains safe, secure, and healthy work environment and aiming for zero accident
• Making sure sites meet legal guidelines, and health and safety requirements
• To prepare all the Quality-related reports.
• Any other ad-hoc duties as and when assigned

JOB DESCRIPTION:

• UAT testing of existing products and driver/firmware
• Perform functional test, regression test, performance test, sanity test and other tests
• Liase with internal teams (e.g. project lead/developer/team members) to on bugs and product quality
• Co-work with R&D team to reproduce customer issues and verify fixes
• Track and isolate problems, verify resolutions, and qualify bug fixes

JOB REQUIREMENTS:

• Any engineering diploma holder or any engineering bachelor's degree holder who are interested in the testing field
• Good problem solver, ability to troubleshoot and think out of box
• Inquisitive mind, paying attention to small details and good observer
• Strong attention to detail, able to identify discrepancies during the test process
• Analytical mind to correctly judge product behaviour
• Excellent time-management skills and commitment to meet deadlines
• Good communication skills and a team player

Job Title for Posting

Assistant Laser Ablation Engineer

KEY JOB PURPOSE

You are required to ensure the smooth operation of his/her assigned process unit. Your primary responsibility will be to assist our research team in conducting experiments (including coating process) and providing technical support to advance the understanding and performance of the solar cell fabrication processes. You will work closely with researchers and process engineers to contribute to cutting-edge research in the field and help drive the development of next-generation photovoltaics.

KEY RESPONSIBILITIES

The job scope includes:

• Able to work from 8.30am - 5.30pm / 2:30pm - 11:30pm / 9:00pm - 6.00am.
• Prepares substrates/precursors, loads samples, in charge of laser ablation process, and prepares material coating process for experimentation in time and quality
• Evaluates performance of process system.
• Interface with team members, understand their detailed plan and requirement.
• Monitor process and hardware performance.
• Records process conditions and experimental observations.
• Report data to the research team.
• Assist in laboratory and equipment maintenance.
• Perform routine shut down procedure, if needed.
• Ensure cleanliness of work area, upkeep equipment and assists in maintenance program and operating of equipment.

COMPETENCIES AND QUALIFICATION REQUIREMENTS

• Diploma or Bachelor's degree in materials science, chemistry, electrical engineering, chemical engineering, or a related field.
• Enjoy hands-on duties daily (non-desk bound) which may include carrying items, walking, working etc.
• Capable to work in a clean laboratory environment daily
• No disciplinary issues history
• Self-disciplined, good team player
• Responsible and independent worker
• Reactive to malfunctions
• High self-motivated and effective team player with good communication skills
• Attentive to details
• Good written and verbal communication skills (both in Mandarin and English)
• Knowledge of safety protocols and practices in a laboratory setting.

ABRIDGED VERSION OF JOB DESCRIPTION AND REQUIREMENTS

We are looking for a focused and highly motivated individual to contribute to a dynamic and growing team. This team focuses on the fabrication of next-generation photovoltaic technology in our flagship project. We regret that only shortlisted candidates will be notified.

Job Title for Posting

Assistant Process Engineer

KEY JOB PURPOSE

You are required to ensure the smooth operation of his/her assigned process unit. Your primary responsibility will be to assist our research team in conducting experiments (including coating process) and providing technical support to advance the understanding and performance of the solar cell fabrication processes. You will work closely with researchers and process engineers to contribute to cutting-edge research in the field and help drive the development of next-generation photovoltaics.

KEY RESPONSIBILITIES

The job scope includes:

• Able to work from 1:00pm - 10:00pm
• Prepares substrates/precursors, loads samples, in charge of coating process, and prepares material coating process for experimentation in time and quality
• Evaluates performance of process system.
• Interface with team members, understand their detailed plan and requirement.
• Monitor process and hardware performance.
• Records process conditions and experimental observations.
• Report data to the research team.
• Assist in laboratory and equipment maintenance.
• Perform routine shut down procedure, if needed.
• Ensure cleanliness of work area, upkeep equipment and assists in maintenance program and operating of equipment.

COMPETENCIES AND QUALIFICATION REQUIREMENTS

• Diploma or Bachelor's degree in materials science, chemistry, electrical engineering, chemical engineering, or a related field.
• Enjoy hands-on duties daily (non-desk bound) which may include carrying items, walking, working etc.
• Capable to work in a clean laboratory environment daily
• No disciplinary issues history
• Self-disciplined, good team player
• Responsible and independent worker
• Reactive to malfunctions
• High self-motivated and effective team player with good communication skills
• Attentive to details
• Good written and verbal communication skills (both in Mandarin and English)
• Knowledge of safety protocols and practices in a laboratory setting.

ABRIDGED VERSION OF JOB DESCRIPTION AND REQUIREMENTS

We are looking for a focused and highly motivated individual to contribute to a dynamic and growing team. This team focuses on the fabrication of next-generation photovoltaic technology in our flagship project. We regret that only shortlisted candidates will be notified.

We are looking for an experienced IT software engineer to join our dynamic team!

Key responsibilities:

· Report to the IT Manager

· Design, implement, and maintain software applications.

· Monitor IT applications to proactively identify and resolve reported issues.

· Maintain accurate and up-to-date documentation for processes, procedures, and project updates.

· Understands UI, cross-browser compatibility, and general web functions and standards.

· Executes assignments with the use of web applications, scripts, and programming languages such as HTML, CSS, JavaScript, and APIs.

· Develops and validates test routines to ensure the quality of the external and internal interface.

· Plans and delivers software platforms and products across multiple organizational units.

· Designs assignments with web services like REST, SOAP, etc.

· Evaluates written code to ensure it meets industry standards and is compatible with all devices.

· Maintains a professional understanding of web development by tracking trends and participating in study groups.

· Handle ad-hoc tasks and projects as assigned, adapting to changing priorities.

The successful candidate should have:

• BA in Computer Science, Computer Engineering, Information Technology, Information Systems, Software Engineering, or related areas
• Min 3 Years of experience
• Proficiency in C# and/or JS programming languages.
• Proficiency in ASP.NET, .NET Framework, .NETCore, HTML, CSS, JavaScript, NodeJS, NextJS.
• Proficiency in Microsoft SQL Server and/or PostgreSQL.

Working location:

511 Kampong Bahru Road, #04-07, Keppel Distripark, Singapore 099447.

Working hours:

Mondays to Fridays

8:30am to 6:15pm

Whatsapp your resume to 87612258 to APPLY or ENQUIRE TODAY!

Responsibilities:

• To be lead engineer or assistant lead engineer in new shipbuilding or ship repair/retrofit projects
• Provide specialist technical advice and information to internal and external parties
• Prepare detailed design drawing using 3D modelling tools, such detailed design drawing could include ducting design and necessary design document to enable production of prototype for product development
• Review and approve detailed design drawings and documents e.g., piping isometrics, piping layout, ducting arrangement, equipment foundation, equipment installation, machinery room layout, bill of materials and various mechanical outfitting drawings, and ensure that the deliverables meet contractual technical specification and Classification Society’s requirements
• Ensure the detailed design drawings and documents have met the standards set by the department and provide further input for improvement
• Update 3D software database on a regular basis to ensure correctness and consistency of component’s engineering attribute.
• Manage external consultants in engineering integration and deliverables
• Coordinate and lead a team of engineers to ensure timely and accurate engineering deliverables
• Participate in tests and sea trials, where required
• Liaise with ship owners and Classification Societies to obtain approval on engineering deliverables.
• Resolve technical issues raised by ship owners and Classification Societies
  

Requirements:

• Bachelor’s Degree with Honours in Mechanical/Marine/Offshore/Naval Architecture
• At least 5-8 years experience in engineering design on HVAC (Heating Ventilation and Air Conditioning) system
• Good working experience with HVAC turnkey contractor, HVAC equipment supplier, Shipyard HVAC related department
• Well-articulated in presentations to both clients and senior management, with good command of English, both spoken and written
• Strong leadership with project management and interpersonal skills

Knowledge and Skills:

• Strong knowledge of HVAC marine international design codes, Classification/Statutory Rules and Regulations.
• Engineering and design project management skills.
• Software (preferred): AVEVA Marine, AutoCAD or similar functions
• Software (need basis): VA One, Star CCM+, Aveva PID, Pipeflow Expert

Other Information:

• Location: Benoi Road (Island-wide transport provided)
• 5 days work week
• Working Hours: 7.25am-5pm

We are looking for an L1+L2 App Support Engineer to join our dynamic team! You will play a crucial role in ensuring the smooth operation of applications and providing technical support to end users.

• Competitive remuneration package (up to $4,000 + AWS + VB).
• Hybrid working arrangement.
• Be part of a collaborative and supportive team that encourages growth.

Responsibilities:

• Provide assistance to users, addressing inquiries, troubleshooting issues, and quickly implementing solutions to restore systems to full functionality.
• Keep detailed documentation of user interactions, reported problems, solutions applied, and any further actions needed by management or tier 3 support.
• Create user manuals and troubleshooting guides to aid both support teams and users in effectively interacting with the system.
• Work closely with L3 Technical staff and the project manager to set objectives and plan system upgrades and improvements.
• Develop and implement new procedures to boost efficiency, enhance customer satisfaction, and reduce operational costs.

Job Requirements:

• Singaporean only.
• Bilingual in English and Mandarin to handle Mandarin-speaking clients.
• Good writing and communication skills.
• Strong troubleshooting and problem-solving skills with experience in identifying and resolving complex technical issues.
• Experience with ticketing systems (e.g., JIRA, ServiceNow) and version control tools (e.g., Git) is a plus.
• Prior experience in supporting mobile or web applications.

By submitting your resume, you consent to the collection, use, and disclosure of your personal information per ScienTec’s Privacy Policy (scientecconsulting.com/privacy-policy).

This authorizes us to:

• Contact you about potential opportunities.
• Delete personal data not required at this application stage.
• To withdraw consent, email [email protected].
• All applications will be processed with strict confidence. Only shortlisted candidates will be contacted.

Wong Vi Yin (Vanessa) – R24123532
ScienTec Consulting Pte Ltd – 11C5781