Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum10 years QA/QC experiences

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Scope of job:

1. Installation and Commissioning:

• Install electrical systems, equipment, and machinery as per technical specifications and safety regulations.
• Assist in the commissioning of electrical systems and ensure they are operating correctly.
• Ensure all installations are in compliance with the relevant codes and standards.

2. Maintenance & Troubleshooting:

• Conduct routine maintenance checks on electrical systems to ensure efficient functioning.
• Diagnose faults, troubleshoot electrical problems, and repair or replace faulty components.
• Provide preventive maintenance to avoid breakdowns and optimize system performance.

3. Customer Support:

• Offer on-site and remote technical support to customers, ensuring customer satisfaction.
• Respond to customer queries and resolve electrical issues promptly.
• Provide training and guidance to customers on proper use and maintenance of electrical systems.

4. System Upgrades:

• Assess and recommend upgrades to existing electrical systems and equipment.
• Implement system improvements to enhance functionality, safety, and efficiency.

5. Safety & Compliance:

• Follow all safety protocols, electrical codes, and regulations to maintain a safe working environment.
• Conduct safety inspections and risk assessments on electrical systems and equipment.
• Ensure compliance with local, national, and industry-specific electrical standards.

6. Documentation & Reporting:

• Maintain accurate records of service activities, including repairs, maintenance, and customer interactions.
• Prepare and submit detailed reports on findings, repairs, and service schedules.
• Maintain an inventory of electrical components and tools.
• Monitor progress on the works carried out and coordinate with customer and shipyard on site during Repair and Commissioning Job.
• Prepare timesheets and service report upon completion of all works and ensure all document is properly endorsed/verified by customer and uploaded to serve on time.

7. Collaboration & Coordination:

• Work closely with project managers, technical teams, and clients to understand service requirements.
• Coordinate with suppliers and vendors for spare parts and service tools.
• Collaborate with colleagues to ensure efficient and effective project execution.

8. Continuous Improvement:

• Stay updated with the latest electrical technologies, techniques, and industry best practices.
• Attend training and certification programs to enhance skills and knowledge.
• Contribute ideas for improving service efficiency and customer satisfaction.

Required Skills & Qualifications:

· Education:

• A bachelor’s degree or equivalent qualification in Electrical Engineering, Electronics, or a related field.
• Certification in electrical systems or maintenance (e.g., NEC, NFPA) is a plus.

· Experience:

• Proven experience as an Electrical Service Engineer or similar role (typically 5 years above).
• Hands-on experience with electrical systems, wiring, motors, circuit boards, and related components.
• Familiarity with diagnostic tools, testing equipment, and electrical schematics.

· Technical Skills:

• Strong knowledge of electrical systems, circuits, and components.
• Proficient in using electrical diagnostic tools, multimeters, and testing devices.
• Understanding of electrical safety regulations and standards.

· Soft Skills:

• Excellent problem-solving and troubleshooting abilities.
• Strong communication skills (both verbal and written).
• Ability to work independently and as part of a team.
• Customer-oriented with a focus on delivering high-quality service.

Physical Requirements:

• Ability to lift and carry heavy electrical components and tools.
• Ability to work in confined spaces or at heights when required.
• Comfortable working in various weather conditions for outdoor jobs.
• Commissioning, start-up, and testing of mechanical, hydraulic, control system and electric integration system on newly build vessel.
• Recommendation of Spare Parts or solutions to customer during Repair or Troubleshoots Works.
• Constant monitoring of the progress and quality on the works carried out and coordinate with customer and shipyard on site during Repair and Commissioning Job.
• Ensure our Equipment’s perform as per requirement and satisfaction of Customer.

Work Environment:

• The role requires travel to client sites for installations, maintenance, and repairs.
• Work hours may vary based on project deadlines or emergency service calls.

Responsibilities:

• Manage a team of technical supervisors on site to ensure that all site activities comply with the regulations and clients’ requirements
• Work closely with the Professional Engineers, regulatory authorities and contractors to provide supervision on site, to resolve all site issues and ensure timely completion of the projects
• Implement the site supervision quality and safety assurance system
• To carry out all inspection that is under KTP’s submission, Including ERSS, and specialist work that will need his supervision, whenever required.

Requirements:

• Degree in Civil Engineering recognised by BCA, Singapore
• Must be an accredited Resident Engineer with IES, Singapore, upon successful hiring
• Fresh graduates / Resident Engineers with other specializations are welcome to apply
• Candidates with HDB experience are an added advantage and strong encouraged to apply

Responsibilities for this position include:

• Broad-based, hands on knowledge and experience with various types of instrument and electrical systems, equipment and software
• Troubleshoot electrical and instrumentation maintenance issues and complete appropriate documentation
• Update and archive electrical prints, PLC programs, and operator interface software, necessary for the documentation of projects that have gone into production
• Update and archive electrical prints, PLC programs, operator interface software, necessary for the documentation of projects that have gone into production
• Design electrical control and communication systems for production equipment
• Coordinate the installation of electrical equipment by contractors and plant personnel to meet scheduled completion dates
• Carry out the effective delivery of electrical, mechanical and fabric maintenance to both plant equipment and building equipment on the Client’s sites

Desired experience for electrical maintenance engineer includes:

• Provide technical support to Maintenance for AC and DC electronic drives, Programmable Logic Controllers, and control systems
• Provide cost estimates for new projects and system upgrades
• Develop specifications for projects to assure completion of work on schedule with required materials and workmanship
• Assist Production and Maintenance in the start-up and operation of new equipment and facilities

Job Description

We are seeking a dedicated Support Engineer professional to join our team to ensure the smooth operation of our systems and applications. The ideal candidate will have strong technical skills and be able to collaborate with various departments to support and maintain our software systems.

Responsibilities:

Monitor and troubleshoot production issues (Linux VMs, Vendor Product, SFTP).

Collaborate with cross-functional teams to identify and resolve production issues.

Perform root cause analysis and provide solutions to prevent future issues.

Create and maintain documentation related to production issues and resolutions via JIRA.

Implement and maintain processes and procedures to improve production support.

Provide daily, weekly, and monthly reports on system performance and issue status.

Ensure proper deployment and release of software updates & infrastructure patches/upgrades.

Participate in on-call rotation and respond to production issues after business hours. There are two shifts, Morning (7 AM to 4 PM) and Afternoon (2 PM to 11 PM), running 7 days a week.

Deployments during silent hours.

Development work within the vendor product (about 10%-20% of time).

Preferred Qualifications:

Bachelor’s degree in Computer Science or related field.

2–4 years of experience in Production Support or related role.

Strong technical skills in Java, SQL, UNIX, and scripting languages.

Ability to troubleshoot and resolve complex production issues efficiently.

Excellent problem-solving and analytical skills.

Effective communication skills to collaborate with cross-functional teams effectively.

Willingness to participate in on-call rotation.

Key Responsibilities:

• Carry out implementation activities for plant modifications, capital projects and other identified plant improvement projects in line with defined specifications, and qualification of facilities in accordance with site to approved procedures.
• Provides trouble shooting / continuous improvements to processes / systems.
• Maintain high GMP standard meeting the regulatory expectations such that the site is always inspection ready.
• Monitor and enforce compliance measures (including Data Integrity and safety) within their specific discipline to ensure inspection readiness of plant, as well as participate as an audit team member in the conduct of audits.
• Implementation of the GSK Production System (GPS) for Engineering department.
• Support on shutdown activities and on preventative plant maintenance for various systems at site.
• To support the development of facility master plan to ensure compliance to engineering standards, management of obsolescence and asset replacement.
• Monitor and manage the DCS/PLC systems to ensure constant and reliable support to the plant at all times so as to minimize disruption to the production process.

Skills, Knowledge & Experience:

• Good degree in Controls and Instrumentations - related progream
• Minimum 2 years of Controls experience in the process / pharmaceutical industry
• Experience in Delta V system, especially batch process.
• Experience in SIL calculation and TMR system (Honeywell Safety Manager) will be added advantage.
• Experience in the Siemen PLC system will be added advantage.
• Good understanding of validation process
• Familiar and understanding of Global Engineering Standard (GES) and understanding of industrial standards.
• Basic commercial knowledge & project management skills
• Effective communication & Operational Excellence skills

To learn more about Singapore GSK and our people, please click on this link: https://www.linkedin.com/company/glaxosmithkline/life/gsksingapore

#Li-GSK

Why GSK?

Uniting science, technology and talent to get ahead of disease together.

GSK is a global biopharma company with a special purpose – to unite science, technology and talent to get ahead of disease together – so we can positively impact the health of billions of people and deliver stronger, more sustainable shareholder returns – as an organisation where people can thrive. We prevent and treat disease with vaccines, specialty and general medicines. We focus on the science of the immune system and the use of new platform and data technologies, investing in four core therapeutic areas (infectious diseases, HIV, respiratory/ immunology and oncology).

Our success absolutely depends on our people. While getting ahead of disease together is about our ambition for patients and shareholders, it’s also about making GSK a place where people can thrive. We want GSK to be a place where people feel inspired, encouraged and challenged to be the best they can be. A place where they can be themselves – feeling welcome, valued, and included. Where they can keep growing and look after their wellbeing. So, if you share our ambition, join us at this exciting moment in our journey to get Ahead Together.

Important notice to Employment businesses/ Agencies

GSK does not accept referrals from employment businesses and/or employment agencies in respect of the vacancies posted on this site. All employment businesses/agencies are required to contact GSK's commercial and general procurement/human resources department to obtain prior written authorization before referring any candidates to GSK. The obtaining of prior written authorization is a condition precedent to any agreement (verbal or written) between the employment business/ agency and GSK. In the absence of such written authorization being obtained any actions undertaken by the employment business/agency shall be deemed to have been performed without the consent or contractual agreement of GSK. GSK shall therefore not be liable for any fees arising from such actions or any fees arising from any referrals by employment businesses/agencies in respect of the vacancies posted on this site.

The School of Mechanical & Aerospace Engineering (MAE) is a robust, dynamic and multi-disciplinary international research community comprising of world-class scientists and bright students. MAE prides itself in its excellent research capabilities in areas including advanced manufacturing, aerospace, biomedical, energy, industrial engineering, maritime engineering, robotics, etc. The school is equipped with state-of-the-art research infrastructure, housing a comprehensive range of cluster laboratories, test bedding facilities, research centres/institutes and corporate laboratories. Cutting-edge research in MAE addresses the immediate needs of our industries and supports the nation’s long-term development strategies. In the new era of industrial 4.0 and sustainable living, MAE is rigorous in developing new competencies to support the growth and competitiveness of our engineering sector in the global landscape. MAE has grown to be leader in Engineering Research, ranking amongst the top engineering schools in the world.

For more details, please view https://www.ntu.edu.sg/mae/research.

Research Engineer, Algorithm and Operation Researcher for VR/AR system development

• Support the development of advanced VR/AR systems to enhance research. This position focuses on developing Unity-based applications, designing and integrating virtual environments with real-time tracking data for immersive visualization.

Key Responsibilities:

• Join the team to development of advanced VR/AR systems:
• Develop Unity-based applications for dynamic visualization and seamless user interaction.
• Design and implement immersive VR environments.
• Create and enhance high-resolution 3D models of animal and terrains, adding articulated joints for realistic movement and animation of animal model.
• Complete necessary technical documentation writing, summarizing and recording according to project progress.
• Collaborate with the team to achieve project milestones and undertake additional tasks required for successful project completion.

Job Requirements:

• Bachelor’s degree/master’s degree/PhD in computer science, electrical engineering, mechanical engineering or relevant area.
• At least 2 years of experience in Unity or Unreal Engine development.
• Experience with 3D modelling software (e.g., Blender, Maya).
• Proficiency in C# programming.
• Familiarity with VR hardware, especially Meta Quest Pro or equivalent devices.
• Hands-on experience with VICON tracking systems or similar technologies is advantageous.
• Relevant project experience in VR/AR development.

We regret that only shortlisted candidates will be notified

Are you up for the challenging next step in your career? Stolthaven’s Asset Management – Projects department is looking for a Project Engineer who responsible for execution of the technical projects (Capex) for the terminals.

As a Project Engineer, you will be the project manager and have responsibility for the engineering and construction of projects, including all relevant project management tasks.

In this dynamic role, your responsibilities range from construction and modification of physical assets to providing engineering support to the Asset Manager in the design and construction of bulk liquid storage facilities and related equipment. Within the local and global Asset Management teams, you will share knowledge & experience on your specific project or engineering discipline expertise and be involved in efforts to train Asset Management colleagues or other Stolthaven functions.

As part of the local Asset Management team, you will work in close cooperation with the MR&I Engineer, Maintenance Supervisors and other roles for developing project cost estimates to existing and proposed facilities in consideration of environmental and customer requirements. The position is also responsible for review and quality control of field construction work, although potentially supported by Construction Supervisors. Implements programs for compliance with all government and regulatory requirement and other technical areas.

SHVN Stolthaven Terminals a division of Stolt[1]Nielsen Limited (SNL), is the specialist storage provider of bulk liquids: Chemicals, clean petroleum, gases, vegetable oils, biofuels and oleochemicals. Our mission is to be the most respected global storage provider, delivering safe, high-quality, sustainable storage and handling solutions for our customers around the world.

Key Responsibilities

1. Provides comprehensive technical and management support on all technical projects assigned by the Asset Manager. Typically class I & II capex projects. This includes, but is not limited to:

• Prepare project details, scope engineering documents and cost estimate for the execution of the capex program together with (main) contractors and other departments and disciplines
• Prepare Requests for Quotation and other procurement documents in close cooperation with Stolthaven’s procurement team
• Responsible for coordination of procurement and or contracting of materials and services for your projects together with Stolthaven procurement
• Governance on quality and legal and or safety requirements during the whole project including execution
• Responsible for commissioning and closing of the project to operations and maintenance and ensure closure of project including timely completing of as-built files
• Responsible for leading change process in case of scope change
• Responsible for safety, quality, progress and cost control and reporting during the project
• Sets priorities and project scheduling for completion of projects within required deadlines
• Provides input to Manager of Engineering as required to complete monthly cost and schedule tracking reports on capital projects
• Supervises contractors in activities related to new construction, modifications to existing facilities and plant repair items
• Responsible for leading project evaluations and Management of Change processes for the projects at hand.
• For larger projects, this role can also be part of a project management team whereas the responsibilities are defined by the Project Manager.

2. General multi-disciplinary engineering works, such as:

• Support the preparation of technical proposals for improvements of technical installations
• o Proactively identifies technical risks in projects and seeks for mitigation
• o Providing assistance in the formation of annual capital budget forecasts
• o Ensure all systems within the facility are designed, installed, and maintained in accordance to local, state and federal regulations and standards

3. Support or promote innovations, new products and methods by:

• Meeting with vendors to acquire knowledge to technical advancement, cost control and alternate solutions to typical terminal design and maintenance requirements
• Attending continuing education seminars and conferences to acquire knowledge pertinent to technological advances and regulatory changes
• Interacts with other initiatives for example in Risk Based Inspection meetings contributing to standardized way of working over terminals and within team by working on corporate projects assisting the global Asset Management team

4. Enforces established plant safety and environmental policy and procedures as related to assigned projects and related tasks.

Qualifications

1. Bachelor/Master degree in Mechanical Engineering, E&IA, Civil or related field

2. Proven track record in an engineering design position, preferably in the field of storage tanks or in a related industry

3. Must be familiar with all applicable standards and codes relating to bulk liquid storage facilities for the applicable terminal location. This could include IEC, API, EEMUA, ANSI, NFPA, NEC, OSHA, and CFR and any other (local) codes.

4. Project management experience is preferred field

5. Minimum 5 years progressive engineering experience in terminal or related industry

6. Minimum 10 years progressive experience in terminal or related industry may be accepted in lieu of a degree

7. Self-motivated to ‘close the loop’ with actions and administrative responsibilities

8. Fluency in English and preferably in Chinese (read & write) as the job requires liaising with our Taiwan joint venture

9. Able to build and maintain both internal and external relations on various levels

10. Able to communicate effectively both verbally and in written

11, Proven safety leadership and service mindedness

12. Competences: self-motivated, flexible, stress resistant, result driven, team player, humour

13. Requires advanced conceptual thinking in complex and/or completely new situations and analytical skills

14. Must be computer literate with specific skills in MS Office

15. Knowledge of and experience with planning software (e.g. MS Projects, Oracle Primavera etc.) and Autodesk products (e.g. Autocad) is considered an advantage

16. Occasionally the ability and willingness to work weekends and/or holidays to accomplish critical project assignments

17. Depending on the required engineering discipline, have knowledge of the following:

• Mechanical: Must have in-depth knowledge of all standards and codes relating to bulk liquid storage facilities applicable to the location, such as API, ANSI, NFPA, NEC, OSHA, CFR, PGS
• EI&A: Must be familiar with all standards and codes relating to bulk liquid storage facilities applicable to the location, such as ATEX, IEC, IEC61511, SIL applications, field instrumentation
• Affinity with IT network components (e.g. firewall and basic networking setup) and experience with FAT for E&I system, panels, automation, etc.
• Knowledge and experience with reviewing drawings such as P&ID, Single Line Diagram, MCC drawings and other E/I/Automation specifications, calculations and drawings
• Knowledge and experience with ACAD and E-plan drawings
• Experience with trouble shooting E&I installations

18. Willing to working in Jurong Island (Company transport is provided at designated pickup point)

What we offer

Join us and become part of a family-founded organization where your contribution counts.

• A full-time and permanent role
• Working Hours: 5 days’ work week (Mon-Fri), 8.30am to 5.30pm
• A competitive compensation package, including a 13th month
• Good Flexible Medical Benefits for you and your family members
• Company Transport is provided as designated pick-up point

How to apply

• Complete the online application form and send it to us along with your CV
• Short-listed candidate, will be invited to attend interview at our terminal

Got questions about the process? Contact [email protected].

About Stolt-Nielsen

Stolt-Nielsen Limited is a long-term investor and manager of businesses, focused on opportunities in logistics, distribution, and aquaculture. The Stolt[1]Nielsen portfolio consists of its (three) global bulk-liquid and chemicals logistics businesses – Stolt Tankers, Stolthaven Terminals and Stolt Tank Containers – Stolt Sea Farm and investments in LNG. Stolt-Nielsen Limited is listed on the Oslo Stock Exchange (Oslo Børs: SNI).

Disclaimer for recruitment agencies

We don’t accept any unsolicited applications or CVs from recruitment and selection agencies.

Activate Interactive Pte Ltd (“Activate”) is a leading technology consultancy headquartered in Singapore with a presence in Malaysia and Indonesia. Our clients are empowered with quality, cost-effective, and impactful end-to-end application development, like mobile and web applications, and cloud technology that remove technology roadblocks and increase their business efficiency.

We believe in positively impacting the lives of people around us and the environment we live in through the use of technology. Hence, we are committed to providing a conducive environment for all employees to realise their full potential, who in turn have the opportunity to continuously drive innovation.

We are searching for our next team members to join our growing team.

If you love the idea of being part of a growing company with exciting prospects in mobile and web technologies that create positive impact on people’s lives, then we would love to hear from you.

Health & Co-Development Business Unit is looking for L2 Support Engineer

Internal Code: A25033

What will you do?

• We adopt agile software practices as our core operating principle, and we work with the latest software technologies and best practices. We are also very proud of our flat team structure, and collaborative and fun culture.
• We are seeking a highly motivated software engineer who will write beautiful code, and contribute in delivering the next generation national health claims processing platform.
• If you are looking to collaborate with highly motivated peers, and immerse in best industrial practices, or if you have a deep passion for contributing to the public good, this is the right opportunity for you.
• Design, develop, document, test, deploy, and maintain software applications.
• Improve software quality using Scrum practices such as code review and unit testing.
• Be well-rounded and collaborate with QE, DevOps, or Product Owners and Business Analysts to contribute to the success of the project.
• Perform L2 Support

What are we looking for?

• Degree in Computer Science, Computer or Electronics Engineering, Information Technology or related disciplines.
• At least three years of professional experience in a software engineer or equivalent position.
• Familiar with cloud-native technology and architecture.
• Familiar with Clean Code, Design Patterns and Unit Testing.
• Knowledge and experience in Kotlin, Spring Boot Framework and Spring Cloud will be advantageous.
• Working experience in Agile and UX development environments will be an added advantage.
• Good presentation and listening skills.

What do we offer in return?

• Fun working environment
• Employee Wellness Program

Does it sound like something you are interested in exploring further? Please be in touch with our team for an initial chat at [email protected]

Activate Interactive Singapore is an equal opportunity employer. Employment decisions will be based on merit, qualifications and abilities. Activate Interactive Pte Ltd does not discriminate in employment opportunities or practices on the basis of race, colour, religion, gender, sexuality, national origin, age, disability, marital status or any other characteristics protected by law.

Protecting your privacy and the security of your data are longstanding top priorities for Activate Interactive Pte Ltd.

Your personal data will be processed for the purposes of managing Activate Interactive Pte Ltd’s recruitment related activities, which include setting up and conducting interviews and tests for applicants, evaluating and assessing the results, and as is otherwise needed in the recruitment and hiring processes.

Please consult our Privacy Notice (https://www.activate.sg/privacy-policy) to know more about how we collect, use, and transfer the personal data of our candidates. Here you can find how you can request for access, correction and/or withdrawal of your Personal Data.

Responsibilities:

• Oversee wafer manufacturing to meet quality, yield, and production targets.
• Collaborate globally on process alignment and qualification of new processes, suppliers, and consumables.
• Work with cross-functional teams to enhance process capability and yield.
• Coordinate troubleshooting for process issues and yield losses.
• Drive continuous process improvements and resolve chronic quality issues.
• Develop best practices and innovative solutions for ongoing improvement.
• Conduct statistical data analysis for process improvement and data interpretation.
• Utilize problem-solving techniques (8D, Fishbone, DOE) and risk assessment tools (FMEA).

Requirements:

• Degree in Engineering or equivalent.
• Knowledge of quality management systems, data analysis, DOE, and SPC
• Proficient in statistical software (e.g., JMP).
• Experience with Visual Basic, databases, and queries (preferred).

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

• Develop and implement maintenance schedules for machinery and equipment.
  Ensure all maintenance and repair works adhere to specifications, are completed on schedule, within budget, and accurately documented.
  Liaise internally between operations teams to address machinery breakdowns and operational concerns.Coordinate data collection on auxiliary materials from operations teams and report on a weekly basis.
  Manage receipt, maintenance, and monitoring of machinery parts inventory.
  Collect machinery maintenance repair data and costs for analysis.
• Prepare monthly machinery reports detailing maintenance activities and performance metrics.Undertake additional tasks as required to support operational needs and project requirements.Preferably with at least 3 years of working experience in related field.
• Comfortable working in Workshop environment.
• Those who have experiences in machinery spare parts will have added advantage.
• Resourceful with positive attitude and able to work independently.

Main Job Function: Responsibilities:

• Overall responsible for Aftersales services and customer coordination
• Installation, commissioning, repair and preventive maintenance of Compressed Air systems
• Conduct on-site training to customers.
• Service Report Management,
• Spare Parts Ordering & Processing for jobs and stock
• Organizing goods for projects and coordinating Deliveries when required
• Prepare quotations for service jobs and follow up.
• Warranty handling

Pre-requisites:

· Advance Diploma in Mechatronic/Mechanical/Electrical Engineering

· Able to work independently with good analytical, communication and interpersonal skills.

· Willing to travel in Asia region for After-Market Support and training when required

· Team player who is self-motivated

· Knowledge on Screw & Piston compressors preferred Both Oil Lubricated and Oilfree

· Class 3 driving license would be added advantage.

· Able to speak and write good English

· Able to speak in Chinese (Mandarin) will be of advantage

· Knowledge of using computer for communication and use in controller repairs

· Technical knowledge with related to Air compressors/machinery & parts

· Over 2 years work experience in similar work environment would be an added advantage

Interested applicant, please email in with a detailed resume with photograph and stating expected salary to:

Nalin Amunugama

General Manager BOGE Asia Pacific

Email: [email protected]

Key Responsibilities:

- Provide technical support and expertise on marine electrical systems, products, and solutions.

- Assist in the selection, specification, and procurement of marine electrical equipment for various maritime applications.

- Evaluate client requirements and recommend suitable electrical solutions, ensuring compliance with industry standards and regulations.

- Work closely with the sales team to deliver product presentations, provide quotes, and respond to customer inquiries.

- Liaise with vendors and suppliers to ensure the timely procurement of electrical components and equipment.

- Prepare and review electrical drawings, schematics, and documentation for projects.

- Ensure adherence to safety standards and quality assurance procedures for all electrical installations and services.

Job Requirements:

- Minimum 3 years of relevant experience in marine electrical systems.

- Strong understanding of marine electrical standards, regulations, and safety procedures (e.g., SOLAS, ABS, IEC standards).

- Familiarity with electrical design and installation on marine vessels.

- Excellent communication skills, both verbal and written, with the ability to interact with clients, suppliers, and internal teams.

- Ability to work independently and as part of a team in a fast-paced, customer-oriented environment.

- Strong problem-solving skills and attention to detail.

Job Responsibilities:

• Able to plan / coordinate site works and resolve drawing details and discrepancies.
• Able to liaise with consultants and subcontractors.
• Able to work independently and as a key member of the Site Management.
• Ability to identify potential and occurring problems that affect the schedule of works at site and recommend solutions to relevant team/department.
• Review drawings for conflicts with Structural/M&E and liaising with consultants to resolve issues.
• Ensure all works are carried out within schedule and maintain the required quality.
• Ensure work safe environment at the work site and manage workers.
• Assist Construction/Project Manager in overseeing the daily construction and site coordination of different activities.
• Responsible for preparing, submission and monitoring of technical drawings, method of statements and shop drawings.
• To monitor the progress of work against the baseline schedule & preparation of daily records & monthly site progress reports.
• Responsible for general on-site technical and engineering matters.
• Quality Control.
• Co-ordination of works with subcontractors.
• Liaise with the consultants on technical and quality issues.
• Arrangement for inspection of works.

Job Requirements:

• Bachelor degree in Civil Engineering or related equivalent
• Required skill(s): MS Office, preferable candidate with AutoCad skills
• Minimum 2 years Site/Working Experience
• Site Location West Region

JOB RESPONSIBILITIES:

• Perform Stamping die set design according to product specification & requirement
• Carry process layout discussion & confirmation with R&D & production team
• Perform 3D CAD construction for complex shapes Profile Punch & Die
• Work as a team & perform tool testing with tester to achieve tooling FA timely
• Carry out further tool improvement during initial production period to stabilize tool condition

JOB REQUIREMENTS:

• Diploma / ITE in Mechanical Engineering, Precision Engineering or related disciplines
• Experience in metal Stamping Designing is needed
• Proficient in 2D & 3D AutoCAD or others CAD applications
• Be able to work independently & work under pressure
• Willing to perform overtime

Others:

• Working Location: Bulim Walk (nearest MRT: Boon Lay)
• Mondays - Fridays: 8:00am to 5:30pm
• Uniform & Lunch provided
• Company transportation at various pickup points (Northern & Western areas of Singapore)

Job Responsibilities

• Report and assist Project Manager (PM) on project functions included but not limited to project management, site management, risk control management etc. to meet the project(s) goals.
• Assist Project Manager in project planning, implementation and to coordinate all construction works on the project site are in accordance to the master and detailed work program.
• Prepare, plan and submit project related documents, such as schedules, method statement, design plan, risk assessment, monthly report, etc.
• Manage day to day project activities including scheduling, coordinating and monitoring and reporting update of projects
• To supervise the execution of the works and ensure that the works are carried out in accordance with contract specification/bills of quantities, construction drawings, company’s quality standards, Environmental, Safety & Health (ESH) practices and all other contract document
• To coordinate and liaise with Client’s representatives, relevant Authorities, Consultant, Subcontractors, Suppliers, etc. on all project aspects and need be, to provide all technical and non-technical resolutions followed by documentation.
• Liaise with client or consultant for site inspections, submission of necessary technical reports and ensure necessary records are maintained at site. Assist in verifying progress payments and claims from Contractors.
• Attend regular meetings with Client’s Representative, Consultants and/or Contractors and ensure the progress is on schedule
• Establish proper and effective document control system, maintain & conduct reviews of detail design drawings, project documents and specifications.
• Be responsible for any other duties that may be assigned from time to time as your superior/management deem fit.
• Be the primary focal point between various parties

Qualifications & Experience

• Diploma or Bachelor’s Degree in Electrical Engineering/Electronics/Control Systems Engineering or related disciplines

Preferred Skills & Characteristics

• Self-starter and ability to self-manage strong interpersonal and leadership skills
• Demonstrated oral and written communication skills
• Must have high level of integrity, able to generate trust and build alliances with co-workers
• Able to communicate effectively & diversely for prompt resolution to site matters
• Able to work independently, take initiative and willing to work overtime/weekends (when needed)
• Ability to foresee and resolve issues before surfacing would be an added advantage
• Familiar with Job Safety Analysis, Work Method Statement and Permit to Work application requirements and procedures
• Ability to maintain good project documentation and is familiar with ISO documentation requirements
• Safety certifications such as Working at Height, Construction Safety Orientation Course etc. preferred
• Mandarin speaking preferred as will be liaising with overseas vendors
• Basic knowledge on Industrial Control Real Time Systems such as PLC/SCADA/IoT
• Basic programming skills in VB, C, C++, Java, C# etc is advantageous
• Additional skills in AutoCAD, Revit and Microsoft Office are advantageous

Position Overview: We are seeking a dedicated and detail-oriented Quality Engineer to join our team. The successful candidate will be responsible for ensuring the quality of low voltage switchboard panels to meet industry standards and client requirements. This role requires a strong understanding of electrical systems, testing procedures, and quality assurance.

Key Responsibilities:

• Conduct comprehensive testing of low voltage switchboard panels, including insulation resistance tests, contact resistance tests, high voltage tests and function tests.
• Perform inspections and audits of electromechanical assemblies to ensure compliance with applicable standards and specifications.
• Document test results and prepare detailed reports for internal and client review.
• Collaborate with design and manufacturing teams to identify and resolve any issues or discrepancies.
• Ensure all testing equipment is calibrated and maintained in good working condition.
• Participate in continuous improvement initiatives to enhance testing processes and procedures.
• Train production staff on quality control processes and provide guidance on quality-related matters.
• Stay updated with industry standards and advancements in testing methodologies.
• Ensure the quality of products meets the required standards and specifications.
• Support onsite testing, FAT, SAT and troubleshooting activities, if necessary.

Qualifications:

• Minimum Diploma in Electrical Engineering or a related field.
• Minimum of 2 years of experience in testing low voltage switchboard panels or similar electrical equipment.
• Strong knowledge of electrical testing procedures and standards (e.g., IEC 61439).
• Proficiency in using testing equipment and tools.
• Excellent analytical and problem-solving skills.
• Strong attention to detail and accuracy.
• Good communication and teamwork skills.
• Ability to work independently and manage multiple tasks effectively.

Preferred Qualifications:

Certification in electrical testing or quality control.

Drex-Chem Technologies Pte Ltd

The DREX-CHEM GROUP is a successful leader in the distribution of specialty chemicals, resins, pigments, printing consumables & equipment in ASEAN and Hong Kong/China. The Company views our human resource as the most vital key to our continuing growth and profitability.

To meet the challenges of our growth market, we have IMMEDIATE vacancies for:

SALES ENGINEERS

(Ability to work in Tuas and Stay in Singapore should Only Apply.)

Responsibilities :

· Sales, marketing, technical service and support.

· Product development, sales and supply.

· Responsible for processing orders and documentation.

· Identify and create new accounts to increase sales revenue.

· Execute a sales plan and report daily activities to the Manager

· Develop business relationship, visit and make presentation to potential customer.

· Collect and review customers’ enquiries and prepare quotations.

Requirements:

· Degree or Diploma/ITE in Chemistry or an discipline in Chemical, Electrical, Electronics or Mechanical or related discipline.

. 2 years’ experience in Sales/Marketing in either Semiconductor and Electronic Industries

· 1-2 years’ experience in Sales & Marketing in the Paints/Inks or Printing or Construction Industry will be an advantage.

· 1 to 2 years or more hands-on experience in sales or technical support, manufacturing, laboratory or quality control.

· Excellent communication skills.

· Good spoken and written English.

· Valid Class 3 driving licence with own car has added advantages.

· Reliable, loyal, committed, honest and capable of developing new markets.

· Successful finishers with good track record have an advantage.

· Willing to learn and adapt.

· The necessary training will be provided.

· Able to travel overseas for training and business development.

. Ability to work in Tuas and stay in Singapore should only apply.

The Company offers excellent career advancement program with attractive remuneration packages for performers.

Interested applicants are invited to write in (marked “Private & Confidential”) before 8 February 2025 with full resume, current and expected remuneration details to:

Drex-Chem Technologies Pte Ltd

1 Tuas, Avenue 16.

Singapore 638924

Attn : HR Manager

Or email to: [email protected]

JOB DESCRIPTION

• Assist Project Manager to oversee, coordinate & execute assigned projects. And ensure projects complete and deliver it on scope, on schedule & on quality.
• Perform project schedule, planning, material requisition, cost monitoring and documentation submission & control.
• Coordinate with the internal design team & external customers on project document & drawings submission, amendments, re-submission & approval.
• Update & backup project documentation, drawings, reports & procedures (SOP, WI, Lesson Learned, etc.)
• Participate projects progress meeting and update weekly status, monitor contracts completion and submit weekly reports to PM & customers.
• Work closely with internal team (production, logistic, QC, service etc.) on project schedule and deliveries, FAT, SAT, and modification work.
• Co-ordinate with principals and customers to support technical matters of products manufacturing in factory, and systems installation on site.
• Attend site meetings, site surveys and switch room measurement etc. site activities.
• Liaise with customers on factory inspection, deliveries, installation and on-site testing.
• Work together with PM & team members to attend & service customers’ complaints, feedbacks and provide solution for project change requirement.
• Support team members work to enhance teamwork spirit.
• Participate in product demonstrations, testing and commissioning if required.
• Any other duties when assigned by management.
• Ensure all safety measures and proper housekeeping rules are implement.
• Adhere to plant safety, food safety, sanitation standards and following all governance guidelines.

EDUCATIONAL QUALIFICATIONS

Diploma in Electrical Engineering, or related industrial engineering field.

EXPERIENCE & SKILL FACTORS

• Min 2 years’ working experience, prefer in project management.
• Some hands-on experience of electrical SWBD and system assembly & installation.
• Familiar with local codes, regulations and procedures.
• IT skills (MS Office). AutoCAD preferred.
• Good communication and people relation skills.
• Leadership, ownership, team player, self-motivated.
• Attention to details and eager to learn new technology

Primary Responsibilities:

• Identify and solve engineering problems as needed
• Support manufacturing/assembly process improvement
• Responsible to uphold electrical safety standards and ensure regulatory compliance

Job Descriptions:

• Prepare and update process check sheets and manuals
• Troubleshoot technical issues and optimize system performance as needed
• Provide technical guidance and mentor Technicians
• Conduct and prepare root analysis and part defect report
• Work with Internal parties and vendor to prevent recurrence
• Liaise with R&D department for engineering change request
• Pre-inspection/inspection on MTC’s Quality Issues
• Prepare electrical inspection test sheet for test and measurement
• Evaluate and implement corrective measure on test result
• Ensure adherence to design specifications, quality standards, and safety protocols
• To carry out or perform tasks / activities, prepare and submit necessary reports to Superior from time to time

Job Requirements:

• Diploma in Electrical Engineering or equivalent
• Good interpersonal and communication skills

Job Description:

• Lead metal Additive Manufacturing process, materials and application development and service projects, including material selection, part design, parameterization, prototyping and manufacturing of AM parts
• Scoping, managing, and executing of customer projects within budget and schedule, ensure deliverables, objectives and customer requirements are met
• Provide technical consultation and support to customer enquiries relating to metal AM application
• Operation of metal AM machines and auxiliary equipment, including maintenance, troubleshooting, risk assessment, and managing of AM lab
• Documentation of project reports, engineering reports, technical data, process know-hows; development of SOPs and best practices for AM equipment and processes
• Support market promotion and customer engagement; participate in local or overseas industry exhibitions, tradeshows, conferences, and seminars; facilitate lab tours, demos and presentations
• Provide technical content to support creation of marketing collaterals such as demo parts, product videos, whitepaper, etc.

Responsibilities:

• To achieve R&D development goals in order to fulfill business needs and support company’s growth.
• Proactively provide engineering support and solutions to relevant department such as manufacturing, customer service, sales, application
• Adhere strictly to job process defined by Makino's QEHS policy Engineering to achieve and comply to Makino quality standard
• Contribute to improve Makino technical core competency through continuous learning and innovation
• Share knowledge with relevant people to help create a knowledge bank and learning organization
• Independently and proactively develop and validate new unique engineering designs
• Mentor and guide junior Engineers/Technical Officers
• New hire is required to undergo specific tests for who are exposed to certain occupational hazards.

Requirements:

• Bachelor's Degree / Master / PHD in Engineering, Mechanical, Materials, Aerospace or equivalent
• Min 5 years of working experience with metal Additive Manufacturing process and application development
• Hands-on experience with LMD/DED machine operation
• Proficient in data preparation, CAD/CAM and toolpath generation for LMD/DED process
• Strong understanding of LMD/DED process, materials, and key process variables
• Experience with parameters development, material characterization, or process simulation
• Familiar with metal AM process chain
• Keen on hands-on work
• Fast learner and agile, able to adapt to dynamic work environment
• Able to work independently and self-motivated

Responsibilties:

• Reviews technical specifications, drawings, procedures, and standard pertaining to the project requirements
• Prepares and reviews the project quality documents, procedure, ITP
• Reviews drawings, documents & weekly updated drawing register from document controller and distributes to project QA personnel
• Administers the project internal quality audit to ensure compliance with the project quality plan
• Monitors the inspection and documentation activities of QA Inspector to ensure complain with inspection test plan and project quality requirements
• Oversees the daily assigned project mechanical and HVAC related construction works and review the daily inspection
• Oversees the assigned inspectors work performance and make sure the completions of tasks are as per the project plans and schedules
• Deploys QA inspectors for project inspection activities
• Liaises with Owner and class pertaining to quality related issues and technical and technical calibrations and queries
• Handles and resolves quality related issues arising from sub-contractor and in-house production
• Coordinates the testing and commissioning requirements with Engineering, Project Manager, QA Department, and vendors
• Reports non-conformance and issue Improvement note, where necessary
• Performs any other assigned duties and responsibilities

Job Requirements

• Bachelor’s Degree in Naval Architecture / Marine and Offshore / Mechanical Engineering or related engineering disciplines
• API 570. CWSIP 3.1 Certified Welding Inspector
• At least 3 years of relevant Quality Assurance working experience, preferably in the offshore and marine industry
• Good analytical and problem-solving skills
• Able to multi-task and able to work in a fast-paced environment

Our Addresses and Working Hours:

Seatrium Limited

(Tuas Yard)

Pioneer Sector 1, Singapore 628437

(Islandwide transport provided)

Mon - Thu: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

RESPONSIBILITY

• Assume a technical expertise in assessing sites, conducting detailed drawings, and estimating Solar project capacity and costs.
• Formulate comprehensive design specifications and functional requirements for the region, ensuring alignment with project needs.
• Complete system designs for projects including site plans, mechanical racking and attachment plans, single-line electrical drawings, specification of balance of system location and interconnection details.
• Conduct in-depth analysis of factors influencing system performance.
• Partner with the O&M Team to evaluate system performance, identify optimization opportunities, and drive continuous improvement initiatives.
• Perform software simulations of solar photovoltaic (PV) system performance & energy production
• Execute design calculations, encompassing voltage drop analysis, fault current assessments, and system optimization strategies.
• Ensure compliance with EPC contract specifications and regulatory requirements, mitigating risks and optimizing project outcomes including on-site engineering support.
• Collaborate closely with contractors to review and approve engineering drawing submissions, maintaining rigorous quality control standards.

QUALIFICATIONS & EXPERIENCE

• Degree/Diploma in Electrical Engineering discipline
• 3 to 5 years’ experience in Solar PV system design / engineering.

SKILLS/COMPETENCIES & PREFERRED CHARACTERISTICS

• Proactive self-starter with an ability to thrive in dynamic environments
• Solution-oriented approach with a track record of overcoming complex challenges and driving innovation
• Collaborative team player and able to guide the drafting team.
• Adaptability and willingness to embrace new technologies and methodologies
• Proficient in Microsoft Office and Excel capabilities for data analysis and reporting
• Proficient in design software such as PV AutoCAD,

Responsibilities:

• Work within the Quality Group and the Package Team and liaise with all project team members, such as Engineering, SCM Document Control and Vendor Inspection Coordinator etc.
• Participate in review Material Data sheets. development and issuance of Material Requisition/ RFQ.
• Understands and ensure quality requirements in built into the RFQs and POs documents as well as all the package specific Quality Requirements.
• Review the Technical Bid documents submitted by vendor
• Engages in the review and response to the Technical Clarification on Quality related issues
• Issues Quality Bid Technical Evaluation report for each Bid Package
• Participates in PO award recommendation
• Interfaces with the Vendor Inspection Coordinator wherever source inspection is required.

Requirements:

• Degree in Mechanical Engineering.
• Minimum of 5 years’ experience in equipment procurement for oil & gas/ offshore industries.
• Possess CompEx certified (Module 11), ISO 9001:2015 Lead Auditor, NORSOK / PED requirement, ASME / ASTM / API codes, DNV-GL codes and standards and basic knowledge of NDT

Our Addresses and Working Hours:

(Tuas Boulevard Yard)

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

Mon - Thur: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte. Ltd. and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

JOB PURPOSE

To assist the Project Manager in design, project planning, construction and safety and quality management of projects and maintenance works to ensure smooth work progression and completion within target time and budget.

Responsibilities:

• To assist the Project Manager on project site work by focusing mainly on the aspects of construction, safety quality management, and project coordination of projects and maintenance works and to ensure smooth work progression and completion within target time and budget.
• Prepare method statements, design plans, and specifications.
• Liaise with the stakeholders (e.g. clients, authorities, consultants) on permits, drawings, and design matters.
• Develop projected milestone and operational plans for different phases of the project which includes scheduling, monitoring and reviewing of the work of others.
• Determine project requirements and estimate resources such as manpower, materials and equipment.
• Ensure that site works are executed accordingly based on approved detailed drawings, interpreted plans, and requirements of relevant authorities.
• Ensure project meets dateline/schedule, safety & quality standards of client’s requirements. Support contract administration and construction inspection by reviewing final plans, specifications, special conditions, and agreements.
• Other job duties as assigned.

Requirements:

• Candidate must possess at least a Professional Certificate/NiTEC, Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Civil), Engineering (Others), Engineering (Environmental/Health/Safety), or equivalent.
• At least 8 year(s) of working experience in the related field is required for this position.
• Specializing in Engineering - Civil/Construction/Structural or equivalent.
• Familiar with Civil, Archi & Steel Structural Works
• Experience in process plants handling both consultants with client will be added advantage