Job Description:

- Conduct product development activities, such as product system & sub-system design and integration, technical evaluation, prototype preparation / testing, test analysis and system qualification.

- Review specifications and technical requirements with clients.

- Generate product technical documents, drawings, assembly drawings and bill-of-materials.

- Provide technical support to manufacturing, quality and marketing department.

- Work effectively in a multiple department project team to ensure that project schedule, budget and quality are met.

Job Requirements:

- Degree in Mechanical Engineering.

- Knowledge in 3D modeling software such as Solidworks is an advantage.

- Able to work hands-on and manage project deliverables individually.

- An effective team play.

- Excellent problem solving skills.

Job Responsibilities:

· Ensure that adequate equipment and facilities are provided for verification of product quality.

· Ensure that all controlled documents are administered effectively.

· Quality control of sub-contractors.

· Daily coordination of all site work activities on Piping, Equipment installation.

· Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.

· Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.

· Carry out verification of purchased products in vendor's premises as specified in contracts.

· Supervise and manage the steel welding procedure and ensure the welding quality.

· Assist on the coordination with temp QP launching sequence for whole viaduct segment.

· Ensure identification and traceability of incoming, in-process finished products.

· Stipulate and control adequate criteria for workmanship.

· Monitoring of all Inspection Records, Material Test Reports and Mill Certificates.

· Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.

· Quality check for architectural finishing such as plastering, brick wall and etc.

· Ensure that all nonconforming materials and products are adequately controlled.

· Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.

· Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.

· Ensure that quality records are properly stored and maintained.

· Define quality requirement for service and installation of products.

· Maintain adequate statistical techniques to control product and process quality.

· Check the BCA approved drawing and study for the feasible work for site.

Job Requirements :

· Bachelor's degree in Engeering studied, or a related field

· Mininum 10 years QA/QC experiences

· LTA Mrt experiences will be an advantages

· Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.

· Detail-oriented and have strong communication skills and able to work with people from all levels.

· Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.

· Independent and a self-starter, with strong personal drive to initiate and implement.

· Good knowledge of documentation procedures.

· Hands on experience with pressure vessel, PED & MOM requirements, ENstandards

Are you up for the challenging next step in your career? Stolthaven’s corporate Asset Management department is looking for a Lead Corporate Development Engineer.

Stolthaven’s corporate Asset Management department is responsible for developing various new business opportunities in close cooperation with our commercial functions, various experts and local management. These range from greenfield and M&A opportunities in our core business to opportunities in new fields of business or innovation such as energy transition related. The role of business development engineer is a key role in this. As a business development Engineer, you will be supporting with everything technical around business development. These are typically large (class III) projects with capex above 0.5 mln. You will be expected to have an inquisitive mindset and willing to work on various engineering disciplines. This role is not so much focused on what you know, but more on your ability to learn!

In this dynamic role, your responsibilities range from developing conceptual designs, masterplans and other project related documentation during the early stages of a project to evaluating new technology and learning all about new products to be stored or new process at our terminals. Within the local and global Asset Management teams, you will share knowledge & experience on your expertise and act as a true partner for the various stakeholders. You should be business oriented and willing to learn the “bigger picture”, focusing on how technical problems can be solved to support business goals.

As part of the global Asset Management team, you will work in close cooperation with the network of technical specialists and procurement for developing project cost estimates to proposed facilities in consideration of environmental and customer requirements.

SHVN Stolthaven Terminals a division of Stolt[1]Nielsen Limited (SNL), is the specialist storage provider of bulk liquids: Chemicals, clean petroleum, gases, vegetable oils, biofuels and oleochemicals. Our mission is to be the most respected global storage provider, delivering safe, high-quality, sustainable storage and handling solutions for our customers around the world.

Key Responsibilities

1. Provides comprehensive technical and management support on all technical projects assigned by the Asset Management Director. Typically, business development conceptual engineering and innovation projects. This includes, but is not limited to:

• Prepare project details, scope engineering documents and cost estimate to prepare for initial (board) approvals for new projects
• Assist in Preparing Requests for Quotation and other procurement documents in close cooperation with Stolthaven’s procurement team

2. General multi-disciplinary engineering works, such as:

• Support the preparation of technical proposals for improvements of technical installations
• Proactively identifies technical risks in projects and seeks for mitigation
• Providing assistance in the formation of annual capital budget forecasts
• Ensure all systems within the facility are designed, installed, and maintained in accordance to local, state and federal regulations and standards

3. Support or promote innovations, new products and methods by:

• Meeting with vendors to acquire knowledge to technical advancement, cost control and alternate solutions to typical terminal design and maintenance requirements
• Attending continuing education seminars and conferences to acquire knowledge pertinent to technological advances and regulatory changes
• Interacts with other initiatives for example in Risk Based Inspection meetings contributing to standardized way of working over terminals and within team by working on corporate projects assisting the global Asset Management team

4. Enforces established plant safety and environmental policy and procedures as related to assigned projects and related tasks

Qualifications

1. Bachelor/Master degree in Mechanical Engineering, EI&A, Civil or related field

2. Familiarity with applicable standards and codes relating to bulk liquid storage facilities for the applicable terminal location is preferred or should be obtained as part of training. This could include API, EEMUA, ANSI, NFPA, NEC, OSHA, and CFR and any other (local) codes

3. Exposure to Multi-disciplinary project teams with various business stakeholders is preferred

4. Self-motivated to ‘close the loop’ with actions and administrative responsibilities

5. Able to communicate with internal and external stakeholders in Portuguese and/or Chinese languages

6. Able to build and maintain both internal and external relations on various levels

7. Able to communicate effectively both verbally and in writing. Especially ability to explain complex technical topics to non-technical stakeholders

8. Proven safety leadership and service mindedness

9. Competences: self-motivated, flexible, stress resistant, result driven, team player, humour

10. Requires advanced conceptual thinking in complex and/or completely new situations and analytical skills

11. Must be computer literate with specific skills in MS Office

12. Knowledge of and experience with planning software (e.g. MS Projects, Oracle Primavera etc.) and Autodesk products (e.g. Autocad) is considered an advantage

13. Occasionally the ability and willingness to work weekends and/or holidays to accomplish critical project assignments

14. Depending on the required engineering discipline, willing to gain knowledge of the following:

• Mechanical: Standards and codes relating to bulk liquid storage facilities applicable to the location, such as API, ANSI, NFPA, NEC, OSHA, CFR, PGS
• EI&A: Standards and codes relating to bulk liquid storage facilities applicable to the location, such as ATEX, IEC, IEC61511, SIL applications, field instrumentation

15. Knowledge and experience with reviewing drawings just as P&ID, E&I drawing and Automation specifications. Knowledge and experience with ACAD and or E-plan drawings

16. Willing to working in Jurong Island (Company transport is provided at designated pickup point)

What we offer

Join us and become part of a family-founded organization where your contribution counts.

• A full-time and permanent role
• Working Hours: 5 days’ work week (Mon-Fri), 8.30am to 5.30pm
• A competitive compensation package, including a 13th month
• Good Flexible Medical Benefits for you and your family members
• Company Transport is provided as designated pick-up point

How to apply

• Complete the online application form and send it to us along with your CV
• Short-listed candidate, will be invited to attend interview at our terminal

Got questions about the process? Contact [email protected].

About Stolt-Nielsen

Stolt-Nielsen Limited is a long-term investor and manager of businesses, focused on opportunities in logistics, distribution, and aquaculture. The Stolt[1]Nielsen portfolio consists of its (three) global bulk-liquid and chemicals logistics businesses – Stolt Tankers, Stolthaven Terminals and Stolt Tank Containers – Stolt Sea Farm and investments in LNG. Stolt-Nielsen Limited is listed on the Oslo Stock Exchange (Oslo Børs: SNI).

Disclaimer for recruitment agencies

We don’t accept any unsolicited applications or CVs from recruitment and selection agencies.

Responsibilities:

- Review technical documents and work together with sales managers to close sales

- Prepare technical calculation and commercial proposal in timely manner

- Provides technical assistance to clients relating to the design and use of products

- Maintain good customer business relationship

- Coordinate with regional partners

- Provide support to Outside Sales and work closely to achieve the sales target

- Monitor and update status of sales quotes and proposals

- Various other sales related tasks as assigned.

Requirements:

- Diploma in Chemical/ Engineering/ Mechanical/ Mechatronics discipline or equivalent

- Good understanding in Mechanical Instrumentation & Controls or Valve Automation

- Good communication, interpersonal and customer service skills

- Willing to learn and a good team player

Job Description:

•Upkeeping test lab and adherence to the lab operational requirements in accordance to the Organisation Principle PQS

•Conduct testing accordance to applicable product standards, guidelines, regulations and dormakaba Corporate Standard (DCS)

•Conduct qualification test of new product or revised component with issuing of test report and recommendations to the test findings

•Develop test scripts, issues tracking and test management

•Prepare samples and coordinate with PQS EN or certification bodies for product certifications

•Manage annual notified body surveillance testing and follow up on non-conformance cases

•Support investigations of product failures

•Actively participate and manage projects to meet deadline

•Evaluation and analysis of competitors’ products – teardown analysis, VA/VE

Job Requirements

•Diploma/Degree in engineering with minimum 2 years of experience, preferably with working experiences in production quality or test lab environment

•Good hands-on skills in hand tools and able to handle installation of fixtures/machinery with weight up to 30kg

•Possess good knowledge in failure analysis of metals and materials related products

•Experience with testing or life cycle management tools an advantage

•Familiar with CAD software is preferable

• Take charge of all aspects of electrical engineering in the design of electrical power distribution system, switchboard, MCC and control
• Prepare and review the design of the Electrical Works, such as equipment sizing, cable sizing, voltage drop calculation, power system study, raceway routing and sizing etc.
• Attend to FAT, supervision of the delivery, installation and testing and commissioning of electrical works.
• Handle and resolve all site technical relating matters.
• Prepare, review and assist in subcontractor design and submission, ensuring all project specifications and design standards are met.
• Assist and collaborate with other project team members to comply with project requirements and meet project schedules.
• Familiar with AUTOCAD Software.

• Take charge of all aspects of electrical engineering in the design of electrical power distribution system, switchboard, MCC and control
• Prepare and review the design of the Electrical Works, such as equipment sizing, cable sizing, voltage drop calculation, power system study, raceway routing and sizing etc.
• Attend to FAT, supervision of the delivery, installation and testing and commissioning of electrical works.
• Handle and resolve all site technical relating matters.
• Prepare, review and assist in subcontractor design and submission, ensuring all project specifications and design standards are met.
• Assist and collaborate with other project team members to comply with project requirements and meet project schedules.

Job Responsibilities:

• Develop and implement quality assurance plans, standards, and protocols for production or project management.
• Review project specifications and engineering drawings to establish quality standards.
• Ensure all work complies with relevant codes, ISO standards and regulations.
• Recording inspection results by completing reports, summarizing re-works and wastes and inputting data into quality database.
• Identify and document any quality issues, non-conformance and corrective actions.
• Providing guidance and advice to the Project Manager on significant changes to the quality management system with direct impact on site operations.
• Training the production team on quality control measures to improve product excellence.
• Collaborate with production, engineering and project management teams to identify and implement process improvements.
• Monitoring the use of equipment to ensure it is safe and discard any that do not meet requirements.
• Conduct root cause analysis for site level NCRs and recommend corrective action and preventive actions.
• Overall knowledge of safety policies and procedures to achieve safe work practices.

Requirements:

• Diploma /Degree in Engineering, Quality Management or related filed.
• Minimum 5 to 8 years of working experience quality assurance/control in industrial /equipment production or engineering projects would be advantageous.
• Proficient in quality inspection tools, data analysis and report writing.
• Up to date knowledge of federal and industry standards and best practices.
• Good Interpersonal relationship and communication skills with proficiency in spoken and written English.
• Excellent problem solving and analytical skills.
• Keen attention to detail.
• Willingness to travel for site inspections.
• Able to work independently and a good team player.
• Candidate who can start work within short notice or immediately would be advantageous.

As Hydroleap is growing and offering solutions to more clients within the existing verticals as well as the new verticals, we are looking for an enthusiastic, ambitious, and high-energy Automation Engineer who will be in charge of PLC programming, designing control panels, and implementing industrial and commercial electrical systems.

The Automation Engineer is responsible for the complete design of the electrical and control functions of new and retrofitted small to medium-sized control panels. In this role, you will be working closely with the rest of the engineering team in terms of process, and hardware design to translate control philosophies into a physical control panel containing PLCs and other electrical components. This role involves your presence in the office, factory as well as site.

What you will be doing

• Translation of process control philosophies into PLC/SCADA programs using one or more of the programming languages (i.e. ladder logic, function block, Sequential Function, Structured Text) and integrating different hardware components (i.e. pumps, sensors, valves, etc).
• Planning, organizing, troubleshooting issues, and managing project and electrical activities in close coordination with engineers, supervisors, and manufacturers.
• Installation, testing, FAT, SAT, and commissioning of control panels and distribution systems on sites.
• Preparation of risk assessment, and HSE for each project.

Your Capabilities and Credentials

• 7 years of experience in PLC and HMI programming projects
• Experience in remote monitoring and data logging.
• Licensed as a professional engineer.
• Experience in CAD or other 3D software

The purpose of this job is to assist the Company with the quality assurance activities on an ongoing basis. The role entails a variety of responsibilities, such as:

• Perform incoming material (e.g. cement, sand, etc), in-process and outgoing materials(UHPC Quality Mix) inspection activities according to the QAQC procedures and plans to ensure compliance with ISO and in-house standards.
• Operate and maintain QAQC laboratory equipment properties (e.g., TGA, BET, PSA, SEM, XRD, sieve analysis) to ensure optimal performance for analysing material, manage the safe storage of hazardous materials, and assist with periodic quality audits.
• Preparation of sampling list for weekly production and maintain the consumables inventory item at laboratory.
• Collect samples for incoming raw material quality checks.
• Manage retention samples, including proper labelling and organized storage.
• Maintain laboratory premises and equipment in accordance with the Company’s standards.
• File & maintain product inspection records.
• Perform 5S and laboratory housekeeping.
• Support the company’s research and development initiatives.
• Execute any additional duties or ad hoc tasks as assigned.
• Strictly adhere to safety standards in all activities to ensure a safe working environment for all.

Basic Responsibilities:

Ø Conduct research on Atomic Layer Deposition technology for perovskite solar cells

Ø Effectively execute related experimental arrangements.

Ø Participate in maintaining laboratory equipment.

Ø Design, execute, and analyze experiments, and submit reports and analyses as required.

Ø Strong written and verbal communication skills.

Ø Other responsibilities, and job description subject to change at any time.

Education/Experience:

Bachelor's or master's degree in engineering or a similar technical discipline, majoring in materials, chemistry, physics, electronics, or a similar field.

Required Skills/Competencies:

Ø Experience with ALD process is preferred.

Ø Some experience working in a chemical/material/semiconductor laboratory.

Ø Basic understanding of materials science, semiconductor device physics, and chemistry.

Ø Ability to handle complex data, analyze, and communicate results effectively.

Ø Ability to coordinate activities between various engineering and operations teams. Good verbal and written communication skills.

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

Ensure that all works carried out are of highest quality standard to meet customer satisfaction.

Execute the site testing and commissioning activities of the company to the satisfaction of the owners and builders

Liaise with Yard’s commissioning personnel to close out issues which will affect the smooth completion of project

Ensure that Punch List are corrected and Test Memo and Service Acknowledgement Report are signed

Ensure that site issues are highlighted to the Production Manager/Assistant Production Manager in order to come up with proper and timely solution

Inform the project engineers in the event of changes on design, drawings and system operation which may arise during the job execution.

Highlight to Project Engineers any changes that may be required on supplied equipment for quality improvement.

Ensure that the equipment used for commissioning are calibrated and maintained in good working condition to achieve quality standard.

Ensure non-conformity report is being raised as and when necessary.

Ensure that non-conformances are promptly resolved by means of investigation and corrective action.

You will be leading the mechanical testing laboratory.

- Minimum of 5 years of working experience in mechanical testing.

- Familiarity with international standards related to mechanical testing.

- Ability to work independently and improve job productivity.

- Strong communication and negotiation skills to discuss terms and conditions and update clients on job status.

- Capability to secure new jobs and contracts from clients.

- Lead a team of technicians to ensure jobs are completed on time and meet quality standards.

- Manage regular audits conducted by clients and the Singapore Accreditation Council.

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

The research and development engineer will focus on developing both essential perovskite solar module structures including electrical and optical properties to maximize device performance and specific commercial products using perovskite photovoltaic technologies for clients.

Key Responsibilities are listed as following:

• Research and Development: Design, develop, and optimize high-efficiency perovskite solar cells and tandem architectures, ensuring scalability and manufacturability.
• Material Science: Investigate and select perovskite materials, charge transport layers, and encapsulation techniques to enhance stability and performance.
• Device Fabrication: Develop processes for device fabrication, including solution-based and vapor deposition techniques, and ensure reproducibility at scale.
• Characterization and Analysis: Conduct comprehensive electrical, optical, and structural characterization of materials and devices, using advanced techniques like IV testing, EQE, SEM, and XRD.
• Collaboration: Work closely with multidisciplinary teams, including material scientists, process engineers, and production teams, to align R&D goals with production strategies.
• Data Management: Document experimental procedures, analyze results, and prepare detailed technical reports and presentations.
• Innovation: Stay pdated with industry trends and advancements in perovskite solar technology and propose innovative solutions for performance enhancement.

· Master’s or Ph.D. in Materials Science, Physics, Chemistry, Electrical Engineering, or a related field.

· Proven experience in perovskite solar cell research, including material synthesis, device fabrication, and characterization.

· Proficiency in thin-film deposition techniques such as spin coating, thermal evaporation, and sputtering.

· Strong analytical skills with experience in advanced characterization tools and techniques.

· Familiarity with degradation mechanisms and strategies for improving device stability.

· Excellent problem-solving skills and a proactive approach to challenges.

· Strong communication and teamwork abilities.

Project Engineer will be under Marine service line, the appropriate quality check, the compilation of accurate and customized results reports and other deliverables.

1. Working in workshop and vessels.

2. Good communication skills with Ship Owners and Superintends.

3. Good time Management and work Independently.

4. Attend and manage dealing with vendors, designers, classification, and flag statutory on engineering issues

5. Reviewing technical specification and drawings from designer meeting owner, class, and customer requirements

6. To perform any other duties & Responsibilities assigned by superiors from time to time.

7. Ability to demonstrate and implement cost -saving measures.

8. Ability to lead to manage project operations, schedule and specifications.

Requirements:

- Min 5 Years experience as Marine Industry.

- Proficient in Microsoft office applications: Word, Excel, PowerPoint & Outlook

-Proficient in AutoCAD application

- Able to work OT.

- Excellent coordination skills.

- Able to working at Height.

- Possess positive working attitude

Job Responsibilities:

• Implement QA plan, review, and revision for company level.

• Report on quality related matters to the QA/QC Manager and/or immediate superior, including preparation of monthly summary To create, prepare and implement the QA/QC plan and any associated and relevant directives and instructions needed to support To develop and manage the quality control and quality assurance procedures and ensure compliance.

• To prepare Inspection and Test Plan (ITP) and Inspection Reports Maintain the ISO and related certifications for company level.

• To perform needed tests on site to ensure works are done according to the contract specifications. Preparation of document submissions for client approval.

• Attend meetings and liaise with the client to ensure that quality requirements are being followed at all times.

• Maintain document record master list pertaining to equipment and monitor on the calibration status. Coordinate and make arrangements for equipment calibration when due.

• Compile and receive relevant material certificates and other required certificates and test report from vendors/suppliers. Coordinate with relevant testing laboratories for testing and witnessing.

• Compile and maintain quality records e.g. Request for Inspection (RFI) and verify as necessary. Coordinate on-site quality assurance and control activities.

• To conduct independent Quality Assurance check on and off site.

• Report non-conformities to the QA/QC Manager and/or Project Manager, perform analysis, identify root cause and propose corrective actions.

• Maintain and control QA/QC practices on daily basis with regular checks and inspections ensuring correct operation and implementation of procedures.

• Advise and assist the project team members on QA/QC matters. Assist in the development of internal QA/QC checklists.

• Implement and enforce Quality Control Plan.

• Verification and checks on raw/incoming materials and/or FG. Documents for non-conforming works and corrective action.

• Identify and assess any foreseeable risk arising from workplace or work processes, minimize environmental impact associated with the manufacturing / assembly activities.

• Perform other duties as and when assigned/instructed by immediate superior or higher management.

Job Requirements:

• Minimum Qualification: Diploma in Mechanical/Electrical or Marine Engineering Discipline Minimum 1-2 years of experience in Marine, Oil & Gas Industry

• Welding Certificate

• Good understanding of Marine/Offshore industry practices and standards.

• Know-how in one or more of these areas GD&T, NDT, welding, steel fabrication, material casting, and machining technology will be preferred.

• Familiar with ISO 9001 requirements & different marine classification societies' standards and requirements will be an added good knowledge of QMS and ability to implement, conduct checks and audit and upkeeping of documents etc.

• Project Management Skills

• A team player with good interpersonal and communication skills, attention to details, meticulous and independent. Good organizational, multitasking, prioritization, and effective time management skills.

• Ability to think critically and resolve problems/issues. Positive attitude, proactive and self-initiated.

• Ability to multi-task in a fast paced and dynamic environment

• Job Benefits

• · Positive and closely knitted working environment

• · Group Hospital Surgical Insurance/ Group Personal Accident Insurance

• · Annual leaves starting with 14 days and up to 21 days

Working Location:

15 Kwong Min Road S(628718)

Shortlisted candidate will be notified

Job Description

• Plan and monitor Mechanical section on the manpower, equipment and resources
• Prepare construction specification in coordination with vendors for critical items and finalize installation procedures
• Prepare method of statements for Mechanical document submission on project basis
• MOS preparation and JSA arrangement for lifting and other site activities
• Study scope of work and documents concerning mechanical items / equipment
• Raise purchase requisition for the project required consumable and hardware items & sub-contractor works
• Liaise with Clients representatives, classification society surveyors and others to comply with inspection requirements
• Initiate and promote safety programs along with safety department like monthly safety committee meetings, JSA meetings, RA meetings etc
• Instruct foreman / subcontractors on a day-to-day basis for work progress
• Monitor progress; instruct supervisor and foreman on safety and quality matters
• Maintain the file copy of all latest revision drawings, approved procedures, clients Site Instruction, Project specification, JCS/JCF and prepare timesheet Form-A & Form-AA, Raised AFI and Client signed reports for Material receiving inspection and Mechanical works for internal and external audits
• Resolve any technical problems or issues faced at the work site
• Keep records of all works done
• Liaise and coordinate with other departments on project issues

Jobs Requirement

• Degree/Diploma in Mechanical Engineering or equivalent
• Minimum 8 years of experience in Marine Shipyard operations
• Able to perform HVAC activities encompass a wide range of tasks related to the installation, maintenance, repair, and optimization of HVAC systems
• Highly motivated individuals with good organizational skills and leadership skills
• Able to adapt new work environment and able to lead independently
• Active and positive minded
• Proficient in MS Office applications (ie. Microsoft Excel)

• Metal Stamping Company
• Basic salary up to $5000
• Full Company Benefit
• 5 days 8.30am – 5.30pm
• Company transport from MRT Pioneer

Job Responsibilities:

• Provide technical tooling support to Tool & Die (T&D) and production teams, ensuring tools meet quality and efficiency requirements.
• Collaborate with the Design department and toolmakers to improve tooling performance and implement continuous improvement initiatives.
• Lead the tooling team in problem-solving, root cause analysis, and skill development through training and guidance.
• Coordinate with production and planning teams to prioritize schedules and ensure tool readiness for production needs.
• Manage tooling modifications, resource allocation, and support the Principal Engineer in their absence.

Requirements

• Preferably Diploma in Precision Engineering or a related field.
• Technical qualifications in Tool & Die Making will be advantageous.

For consideration, kindly submit your CV by clicking “APPLY NOW” or email to [email protected] for confidential discussion.

*Only shortlisted candidates would be notified**

MTC Consulting Pte Ltd | 15C7752

EA. Registration No.: R24124448 | Nana Yeoh Li Xuan

JOB SUMMARY:

Coordinate Gradiant Field Construction and manage Operation activities in Singapore and in Southeast Asia (as long as travels reasonably allow). Responsible for the Coordination, Operations, and Maintenance of Gradiant systems during construction, commissioning, operations and defect liability period phases. Represent Gradiant locally in compliance with Company culture and standards.

ESSENTIAL DUTIES & RESPONSIBILITIES:

In collaboration and alignment with Corporate Engineering, Project Management, Procurement:

• Conduct Field Engineering during the piloting, construction, commissioning and operation/maintenance/DLP/after sale phases of Gradiant’s Projects in Singapore and overseas with minimal supervision.
• Provide technical and hands-on support for the implementation of pilot studies and commercial operations (e.g. process adjustments, chemical preparation, preventive maintenance activities, corrective maintenance, instrument calibration, membrane cleaning, troubleshooting, process optimization) as directed by Gradiant Operations and Process Engineering Managers.
• Manage Gradiant and/or its partners’ site operators in implementing good practices for plant operations and maintenance and daily operational activities through preparation and implementation of standard operating procedures (SOPs) and technical training.
• Support the development, establishment, and maintenance of plant performance monitoring, reporting and improvement.
• Proactively report and investigate plant performance/reliability issues and propose practical and cost-effective solutions.
• Coordinate and oversee the relevant technical support to the operating sites, as to reduce unplanned downtime through failure analysis and corrective actions implementation.
• Support the preparation of the predictive and preventive maintenance programs at operating sites and closely monitor their performance.
• Participate in technical meetings related to Gradiant projects being executed and potential project opportunities as Gradiant’s local representative.
• Promote and support Gradiant after sales services, including spare parts, consumables, ad hoc operational and site technical support. Work closely with Engineering and Procurement departments to correctly specify and source materials and services.
• Positively promote a safe and healthy work environment and employ safe work practices at all times, including documenting incidents and recommending and following through on corrective actions.
• Monitor compliance with contractual and regulatory requirements.
• Maintain efficient communication and information sharing between the Operations Department and Engineering/NPI Departments including writing and issuing technical reports and Return of Experience/Lessons Learned reports.
• Carry out other duties as may be assigned from time to time by your supervisor.

SKILLS/EXPERIENCE/EDUCATION REQUIRED:

• Candidate must possess at least formal trade qualifications. Bachelor's Degree/Post Graduate Diploma/Professional Degree in Environmental, Chemical, or Mechanical Engineering is desirable.
• At least 2 year(s) of experience in Commissioning and/or in Operations and Maintenance in the water industry is required for this position.
• Familiar with various water and wastewater technologies
• Proficient in Microsoft Office Suite
• Excellent analytical thinking, interpersonal/communication skills, writing and problem-solving capacities
• Reliable, well organized, and detail-oriented
• Fluency in English
• Applicants must be willing to travel as and when required (up to, and sometimes exceeding, 50%)
• Familiarization with mechanical,electrical,Instrumentation and Controls of process plants
• Commissioning activities like SAT/FAT,instruments,valves and controls loop check

JOB SPECIFICS:

• Ability to work in a high energy, start-up based environment.
• Strong communication skills to convey ideas and technical information effectively with team and customers.
• Excellent customer orientation, willingness to deal with people, be flexible and be able to meet customer demands
• Curiosity and strong drive to improve status-quo while working in a semi-autonomous environment.
• Pays attention to detail, identifies & solves complex issues.
• Checks work for quality.
• Shares suggestions to improve quality & productivity.
• Works independently with minimal supervision.
• 5.5 days work week

Endress+Hauser is a global leader in measurement instrumentation, services, and solutions for industrial process engineering. We provide process solutions for flow, level, pressure, analytics, temperature, recording and digital communications, optimizing processes in terms of economic efficiency, safety & environmental impact.

Our customers come from various industries, including chemical, food & beverage, life sciences, power & energy, mining, minerals & metals, oil & gas, and water & wastewater. Although we employed close to 16,000 individuals worldwide, we remain a family-owned company, and family-owned companies are different. We believe that competent and motivated employees are the crucial factor for future success.

Become part of our team and write the next chapter in this success story with a career at Endress+Hauser, "Driving Progress Together".

Key Responsibility

The Inside Sales Engineer work closely with External Sales members as one of the main contacts for customers regarding product and services inquiries. The role involves managing customer inquiries, preparing quotations, ensuring smooth coordination with other departments and maintaining strong customer relationships.

This role will be based in Singapore, is part of the Sales Department ( Internal Sales Team ) and reports to the Customer Experience Manager.

The main tasks and responsibilities are:

Collaborative Sales Approach

• Partner closely with all stakeholders to serve customers effectively and meet team sales targets.
• Respond promptly to customer inquiries via phone, email, or other communication channels.
• Build and maintain long-term relationships with customers.
• Promote Digital Sales business

Sales Support

• Coordinate with external sales teams to close sales opportunities.
• Prepare and follow up on quotations and proposals.
• Work with External Sales to ensure correct pricing, delivery timelines, and terms arrangement with customers.
• Verify customer Purchase Orders, convert quotations into sales orders, and process orders using the SAP system.
• Collaborate with the supply chain and operations teams to ensure timely delivery of products and services.
• Monitor and update customers on order status and delivery schedules.

Cross-Department Coordination

• Work with Sales teams, Service, Finance and Supply Chain departments to gather necessary input for quotations.

Basic Technical Support and Problem-Solving

• Understand and interpret technical requirements for products, projects and services.
• Liaise with Application Consultant teams to provide accurate solutions to customer enquiries and challenges.

Customer Service and Problem Resolution

• Deliver exceptional customer service, build strong relationships, resolve problems, and address complaints effectively.

Additional Responsibilities

• Perform any other tasks required by the Company to support its business strategy.

Requirements

· Diploma or Degree in any Engineering related discipline or equivalent

· Minimum 2 years’ experience as Inside Sales or Project Proposal

· Experience in Instrumentation and Automation/Control Engineering environments would be an advantage

· Relevant Technical knowledge (Would be an advantage)

· Enthusiastic, dynamic, and customer-oriented personality

· Systematic and meticulous

· Strong ability to work effectively within a team environment.

· Ability to handle multiple tasks simultaneously and prioritize effectively.

· Excellent communication skills, both written and verbal.

Project Engineer will be under Marine service line, the appropriate quality check, the compilation of accurate and customized results reports and other deliverables.

1. Working in workshop and vessels.

2. Good communication skills with Ship Owners and Superintends.

3. Good time Management and work Independently.

4. Attend and manage dealing with vendors, designers, classification, and flag statutory on engineering issues

5. Reviewing technical specification and drawings from designer meeting owner, class, and customer requirements

6. To perform any other duties & Responsibilities assigned by superiors from time to time.

7. Ability to demonstrate and implement cost -saving measures.

8. Ability to lead to manage project operations, schedule and specifications.

Requirements:

- Min 5 Years experience as Marine Industry.

- Able to work OT.

- Excellent coordination skills.

- Able to working at Height.

- Possess positive working attitude

This role supports the Project Manager. It involves the planning and co-ordination of site work. The person in this role needs to be good at communication and obtaining feedback. Instructions must be given to site personnel in a manner that is easy to understand and the person needs to ensure his instructions are understood correctly. This person will also help the Project Manager with any issues that may arise on site.

Job Scope:
1.) Plan and coordinate site work
- Attend meeting with Main Con and work with PM to prepare relevant information i.e. drawings for approval.
- After approval, update Site Personnel of requirements.
- Prepare necessary permits, drawings to get clearance from authorities.
- Co-ordinate with PM, Site Supervisors and Main Contractor.

2.) Attend site meetings
- Ensure approved construction methods are communicated clearly to site personnel.
- Communicate frequently with PM and Site Supervisors.
- Prepare and pass updated drawings to Site Supervisors.
- Go through drawings and permits and explain to site personnel.
- Clarify with PM if unsure.
- Make decision on behalf of PM if there is a need on site.

- Please note that site can be by the roadsides, at substations or in tunnels. There will be some exposure to the elements.

3.) Submit applications for wayleave to relevant authorities.
- Process for application: Road Opening application, NCE, Purchase of Services Plan, Prepare drawing submission
- Monitor and submit site progress reports
- Submit weekly schedules to client
- Submit monthly progress report to PM

4.) Design of SOP

5.) Training of workforce to reach safety goalposts

Requirements:
- Possess certificate "Manage Workplace Safety and Health in Construction Sites (or Construction Safety Course for Project Managers)".

- Required to sign Permit To Work.
- Proven track record with SP group's projects in high voltage power cable installations.

- Candidates with class 3 license and/or their own transport will be viewed favourably.

- Working hours: Monday - Saturday, 8am-5pm