JOB DESCRIPTION – Network Engineer – Routing and Switching (Level-2)

Required Key Skills

• Expert level knowledge in implementation and maintenance of Cisco Routers and Switches of all series.
• Good knowledge in Cisco IOS
• Good knowledge in implementation and operations support of NAC (network access control)
• Good knowledge in Aruba Clear Pass / Cisco ISE
• Good knowledge in Wireless Network / Access Points / Controllers support and troubleshooting
• Expert level understanding of the OSI or TCP/IP model
• Provide Level-2 technical support and troubleshooting to resolve issues
• CCNP certification
• Hands-on experience with monitoring, network diagnostic, Packet Tracers and network analytics tools
• Good knowledge on Firewall Products like Cisco ASA, FortiGate, Palo Alto, Checkpoint
• Good knowledge on Aruba ClearPass/Cisco ISE, Cisco wireless controllers
• Knowledge on F5 load balancers

Priority Tasks

• Workplace is at customer premises and staff has to follow instituted Workplace securities
• Perform Problem resolution, escalation and/or closure of incident including problem analysis and identification of the source of the problem w.r.t Routing and Switching
• Perform configuration change activities
• Provide problem status to the Service Desk and/or update into the ticketing tool according to the Procedures Manual
• Perform day-to-day Network operation for the Network Infra-structure and Network Equipment at the customer premises, including performance monitoring, bandwidth monitoring.
• Work with customer's vendor to perform testing and preventative maintenance according to the schedule provided by the customer for the Network Equipment
• Perform periodic OS upgrade and Patching as and when required.
• 24X5 rotational shift onsite availability and 24X7 standby / remote support availability as and when needed for critical incidents.
• Perform Problem resolution, escalation and/or closure of incident including problem analysis and identification of the source of the problem
• Provide proactive incident reports for all Network related problems, faults, events within TWENTY-FOUR (24) hours
• Respond to all fault calls inclusive of emails and other forms of communications for Firewall related issues and problems reported
• Escalate the problem to Vendors Support in timely manner and get the issue resolved within the specified time as agreed with the customer
• Provide multi-vendor equipment support across a wide range of models and types of networking equipment
• Maintain the inventory of certificates and install/update/renew certificates as and when required.
• Perform security activities like hardening/periodic health check/ ID validation and other compliance activities as per security policies and standards.
• Maintain/Update inventory list and compliance related databases or similar Databases.
• Maintain the device inventory list for the client when needed, Maintain the software/firmware for all the devices up to date
• Subscribe to vendor notifications for the managed devices for vulnerabilities and review/validate/apply security patches pro-actively.
• Perform device activation / deactivation as per service activation and deactivation process.
• Maintain the IP address inventory and allocate new IP address when required by business.
• Engage third part vendors to resolve hardware issues and follow up till closure
• Monitor vendor End of Life / End of Support notifications for all In Scope Devices and inform the client.

We are hiring Machine Learning Engineer for a technology client on a yearly renewable contract role. The team is building cutting-edge tools and infrastructure to drive innovation and automation throughout the organisation. In this role you will contribute to the creation of new compute layer using Ray and you will help drive the set-up of the infrastructure for Ray on Kubernetes and its integration with the existing Data system

What you’ll do :

• Deliver high-quality AI infrastructure solutions: You will work with the Machine Leaning Platform team to design and develop the infrastructure to support Ray for distributed data processing and model training. You will develop using GitOps to ensure the reproducibility of the system's cloud infrastructure on different Kubernetes clusters.
• Develop observability solutions for Ray: You will be responsible for developing and integrating monitoring and alerting within the client’smonitoring stack powered by Datadog, Prometheus and Grafana. You will also contribute to the creation of runbooks and DevOps guides.
• Support the data science community in adopting Ray: You will work with our product team to socialise Ray's use. You will be responsible for supporting users in running their job on the Ray clusters.

What you’ll need:

• In-depth knowledge of ML-OPS with a solid understanding of distributed computing for data processing. Knowledge of Ray is preferable, but other frameworks, such as Dask, Modin, Beam, Horovod, and Deepspeed, are also valued.
• An understanding of, and ideally experience with, image generation models such as stable diffusion and flux.
• An understanding of ML inference using LLM and other generative models.
• Good knowledge of Python and ML ecosystems.
• Strong understanding of developing and deploying systems on Kubernetes.
• Previous experience with GitOps solutions like ArgoCD is preferred. Good knowledge of Helm and Kustomise is also valued.
• Good DevOps background, with Infrastructure as Code (IaC) such as code with Terraform preferred
• At least 3 years of relevant Machine Engineering experience

If this role sounds like an ideal job move, please hit the apply button with your latest resume alternatively you can email me the resume at [email protected]

Regret only shortlisted candidates will be notified.

CEI No: R1659595 / EA No: 07C3147

Job Scope:

• Assist in the design, analysis, and improvement of mechanical systems and components.
• Support assembly planning and execution, ensuring components meet specifications.
• Troubleshoot and resolve assembly-related technical issues.
• Participate in testing and evaluation of products to ensure quality standards.
• Assist in creating and maintaining technical documentation and reports.
• Help with research and development of new mechanical designs and prototypes.
• Ensure proper maintenance and calibration of assembly tools and equipment.
• Coordinate with cross-functional teams (production, quality, procurement).
• Suggest and implement improvements for assembly efficiency and product quality.
• Ensure compliance with safety protocols and quality control procedures.
• Provide day-to-day technical support to the assembly or production teams.

Requirements:

• Nitec / Higher Nitec / Diploma in Mechanical Engineering
• 2 to 3 years of relevant experience
• Knowledge of industrial automation, jigs and fixture design, FMEA, SPC, CAD, and machine design (preferred)
• Strong project management skills
• Ability to work independently
• Good interpersonal and communication skills
• Willing to travel when necessary

Interested candidates who wish to apply for the advertised position, please click on the APPLY button below to send in your resume to [email protected]

EA License No: 13C6305

Reg. No.: R1981808

For candidate who applied for the advertised position is deemed to have consented to us that we may collect, use or disclose your personal information for purpose in connection with the services provided by us.

Our client is from Oil and Gas industry, a local leading player. They are looking for a Senior Electrical Engineer for the next phase of their business. They are located in West.

Duties:

• Supervise and enhance the reliability of electrical equipment in the Gas Engine Generator (GEG) area.
• Implement and maintain reliability programs and maintenance procedures for electrical systems.
• Manage minor CAPEX electrical projects in line with company standards.
• Investigate electrical failures to identify root causes and implement solutions.
• Coordinate with external stakeholders, including government agencies, on electrical matters.
• Support major expansion projects from an electrical and operational perspective.
• Work with Licensed Electrical Workers to ensure system integrity.
• Participate in emergency response, with assigned roles and responsibilities.

Requirements

• Min Bachelor’s Degree in Electrical Engineering or any relevant field.
• Min 5 years’ experience in Oil & Gas or Petrochemical industry
• Experience in Electrical maintenance or design

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

About ByteDance

Founded in 2012, ByteDance's mission is to inspire creativity and enrich life. With a suite of more than a dozen products, including TikTok as well as platforms specific to the China market, including Toutiao, Douyin, and Xigua, ByteDance has made it easier and more fun for people to connect with, consume, and create content.

Why Join Us

Creation is the core of ByteDance's purpose. Our products are built to help imaginations thrive. This is doubly true of the teams that make our innovations possible.

Together, we inspire creativity and enrich life - a mission we aim towards achieving every day.

To us, every challenge, no matter how ambiguous, is an opportunity; to learn, to innovate, and to grow as one team. Status quo? Never. Courage? Always.

At ByteDance, we create together and grow together. That's how we drive impact - for ourselves, our company, and the users we serve.

Join us.

About the Security Assurance Team at ByteDance

The team is missioned to build infrastructures, platforms and technologies, as well as to support cross-functional teams to protect our users, products and infrastructures. In this team, you'll have a unique opportunity to have first-hand exposure to the strategy of the company in key security initiatives, especially in building scalable and secure-by-design systems and solutions. Our challenges are not your regular day-to-day technical problems; you'll be part of a team that's developing new solutions to new challenges of a kind not previously addressed by big tech. It's working fast, at scale, and we're making a difference.

Responsibilities

- Research, design, develop, test, maintain and continuously improve the in-house vulnerability scanning system, and develop Proof of Concept plugin for it.

- Analyse user needs and develop software solutions, applying principles and techniques of computer science, engineering, and mathematical analysis.

- Update software, enhances existing software capabilities, and develops and direct software security testing and validation procedures.

- Work with multiple cross-functional global teams to integrate hardware and software systems and develop specifications and performance requirements, to deliver high-quality work in rapid product development.

- Incident response when 0day/Nday vulnerabilities happen.

- Research on new vulnerability testing technology.

Minimum Qualifications

1. Familiar with common web security vulnerabilities, and have a deep understanding of vulnerability principles and detection methods.

2. Proficient in Python or Go programming languages, familiar with Linux development environment.

3. Familiar with at least one middleware such as Redis, mySQL, MongoDB.

4. Master distributed system and multi-threaded development, and have experience in large-scale distributed system development and tuning.

Preferred Qualifications

1. Experience of software R&D in large-scale tech companies.

2. Self-driven, with good teamwork and communication skills.

ByteDance is committed to creating an inclusive space where employees are valued for their skills, experiences, and unique perspectives. Our platform connects people from across the globe and so does our workplace. At ByteDance, our mission is to inspire creativity and enrich life. To achieve that goal, we are committed to celebrating our diverse voices and to creating an environment that reflects the many communities we reach. We are passionate about this and hope you are too.

• Instrumentation of measurement and detection equipment for military and homeland security.
• Oversee post-sales delivery of equipment, conduct scheduled maintenance, and conduct diagnostic analyses for troubleshooting and repair tasks.

Requirements:

• Higher Nitec in Electrical & Electronics Engineering or equivalent.
• At least 2 years of working experience

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

This is 12 - months Contract (extendable + convertible)

Location: The Alpha, Science Park

Normal working hours

Essential Responsibilities:

• Carry out detail engineering task for water and wastewater treatment plant to full fill business obligation e.g. On-time delivery, Satisfy contract specification or industrial standard and bring value to customer. Work shall include but not limited to the following:
• Prepare sketches on P&IDs Drawing
• Prepare sketches on Fabrication Drawing
• Prepare sketches on Equipment Layout Drawing
• Prepare sketches on Pipe Routing Drawing
• Prepare equipment and material datasheet
• Perform equipment sizing calculation
• Perform pipe sizing calculation
• Perform hydraulic calculation
• Perform pipe stress analysis
• Perform material take off
• Raise purchase requisition
• Check and sign off engineering design
• Work together with in-house design team aboard to meet engineering deliverable.
• Contribute to value engineering to drive cost down.
• Evaluate vendor quote and provide input on vendor selection.
• Support business initiative to bid and win job as required.
• Support Project Management/ Construction Team on construction activities as required.
• Support Commissioning Team on commissioning activities as required.

Qualifications/Requirements:

• Bachelor Degree in Chemical/Mechanical/ Electrical Engineering
• Minimum 3- 5 years working experiences in design of water and wastewater
• Highly motivated and able to work under pressure
• Experience in construction, test and commission, and operation of water and wastewater plant is a plus point
• Well versed in MS Excel, MS Word, and MS PowerPoint
• Familiar in MS SharePoint, MS Team, and Naviswork
• Ability to operate AutoCAD and SAP is a plus point

Interested candidates, please click "APPLY" to begin your job search journey and submit your CV directly through the official PERSOLKELLY job application platform - GO Mobile.

We regret to inform you that only shortlisted candidates will be notified.

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use, and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

PERSOLKELLY Singapore Pte Ltd

• RCB No. 200007268E

• EA License No. 01C4394

• Registration No. R23112260 (MayThinKyu)

Netpoleon Solutions is a well-established IT Network Security solutions provider and the Asia arm subsidiary of Macnica Inc – a Global Company with trillion-yen revenue.

Netpoleon Solutions has offices in Singapore, Malaysia, Indonesia, Philippines, Thailand, Vietnam, Myanmar, India, Australia and New Zealand, with its parent Company based in Japan.

We are now inviting individuals to join the Singapore office. Candidate applying should have a strong analytical mind and possess excellent cybersecurity skills and knowledge. If you have these qualities, you will embark on an exciting career together with us to pursue our strategic expansion.

Job Responsibilities:

• Deploy and provide professional services: This includes, but is not limited to, the implementation and upgrading of Cybersecurity products that Netpoleon distributes. Occasionally, this will involve managing customers and timelines.
• Provide workable solutions: Offer solutions (or alternatives) based on customers’ requirements.
• Conduct product training: Provide training on our products to customers, partners, and internal teams.
• Perform installations and configurations: Carry out installations and configurations independently using product manuals.
• Upskill and certification: You will upskill and obtain technical certifications for the products or technologies you handle, as applicable.
• Subject matter expertise: Over time, become a subject matter expert to assist in transferring domain knowledge and technical skills to our maintenance team to better support our customers.
• Technical assistance: Support the sales and support teams in technical matters, such as product feature clarification, implementation considerations, tender compliance, and other ad-hoc situations.
• Troubleshoot server, application, and network-related problems: Diagnose and resolve issues affecting servers, applications, and networks to ensure minimal downtime and optimal performance.
• Documentation and Reporting: Maintain accurate documentation of network security infrastructure, configurations, and incident response activities. Generate comprehensive reports on security incidents, vulnerabilities, and remediation efforts for management and stakeholders to ensure transparency and informed decision-making.

Job Requirements:

• Positive and professional working attitude.
• Ability to work both independently and as part of a team.
• Capable of handling stress, meeting tight deadlines, and thriving in a fast-paced environment.
• Nitec/Higher Nitec certificate, Diploma or Degree in IT, IS, Cyber Security, or related fields.
• Good fundamental knowledge in Networking.
• Strong understanding of technology infrastructures such as Firewalls, VPN, DLP, IDS/IPS, Web-Proxy, DNS, Email Security, Log Management, SIEM, Virtualization, Containers, AWS, Azure, Google cloud, DevOps/DevSecOps, Privilege Account Security, Identify Access Management, Endpoint Security, CyberArk Conjur.
• Demonstrate a strong interest in staying updated on cybersecurity trends and hacking techniques.
• Proficiency in programming language like Python, C++, Java, JavaScript, Ruby, Bash scripting, and Power Shell is advantageous.
• Compliance with Company Information Security Standards.

Other Information:

• Working hours: 9am to 6pm, Monday to Friday*
• Training consisting of in-house and vendor-led will be provided. Additional sponsored training available to confirmed staffs subject to performance assessment.
• This position is suitable for individuals with a strong technical foundation but limited professional experience. Recent graduates or those seeking to transition into a technical role are encouraged to apply.

*Expected to work on after office hours, Sat/Sun/Holidays when required by customers.

Interested candidates, please apply via the “Apply Now” button below.

We regret that only shortlisted candidates will be notified.

Job Description:

• To own, maintain and improve the following indices: Quality, Uptime and Cost.
• Sustain equipment KPI and make continuous improvements to enhance the performance.
• Monitor and control equipment performance indices. Optimize PM procedures to make it more effective and efficient.
• Coordinate with both process and manufacturing Engineers to ensure work is carried out efficiently to meet module objectives.
• Manage the logistics for parts so as to prevent prolonged uptime losses in the case of equipment failure.
• Manage the expenditure allocated for equipment maintenance without compromising on quality output.
• Continuous improvement of equipment KPI in terms of quality, uptime and costs.
• Plan and implement an effective Preventive Maintenance program on equipment.
• Coach and Mentor subordinates to ensure that skill level and knowledge are up to date, and continuously give feedback on their work performance.
• Document Corrective Action and Best Known Methods, and Fan it out to all for maximum ROI and learning.
• Participate in CIP programs to optimize equipment utilization and cost of maintenance.
• Become the technical Expert for the respective machine specialization.
• Know how to use SPACE to monitor and analyze SPC charts. Know how to use JMP to analyze engineering experiments. Know how to use measurement instruments effectively in data collection.
• Understand FMEA and be able to generate FMEA analysis for new tool. Able to utilize it to identify tool weaknesses and derive the top 3 to 5 risk factors.
• Able to create PROMIS (SiView) DC OP and SPC charts.
• Coordinate new equipment start-up to support production, from facilities hookup, vendor startup, to acceptance of equipment for production.
• Wafer scrap reduction awareness and mindset.
• Follow up on SPSR, MRB, 8D, TECN, and ECN documentation for closure of issues / events. Provide guidance to Junior Engineers.
• Self audit and update specifications to meet TS16949 Quality Standard requirements.
• Se expectation and carry out performance appraisal for Technician or AE as instructed by Section Manager.

Job Requirements:

• Bachelor Degree in Electrical / Electronics / Chemical / Mechanical /Microelctronics Engineering
• Min 5 years of relevant work experience in Photo Equipment (Track) in semiconductor industry
• Excellent communication, interpersonal and leadership skills
• Strong analytical skill and able to work under pressure in fast pace environment
• Proficient with MS Power Point, Excel, Excel VBA, Power BI

Job Description

• Follow SOP and carry out CAS per specification.
• Execute scheduled / special preventive maintenance (PM) as per PM schedule and
• specifications.
• Troubleshoot basic equipment related issues and minimize equipment downtime.
• Maintain good housekeeping in the production floor / sub FAB / Office, and maintenance
• support areas.
• Ensure and follow good safety practice and also safe custody of tools, equipment and
• other properties belonging to the Module.
• Know how to use SPACE to monitor and analyze SPC charts. Understand all the PR rules
• and follow CAS correctly.
• Know how to use measurement instruments effectively in data collection. Able to create
• metrology job files correctly (equipment list to be defined by the Supervisors.)
• Perform shift duties (12-hours shift) to support the running of production in the Module and
• ensure equipment readiness and worthiness for production.
• Assist Engineer in the installation and hook up of new or upgrading equipment.
• Assist in implementing equipment improvement projects.
• Able to train operators and trainers in new operational procedures.
• Execute good maintenance of support tools.
• Assist new Technician/Associate Engineers on their On-The-Job-Training (OJT) by acting
• as their buddy.
• Provide proper and accurate passed down of line issues and documentation (fill up and file
• the checklists).
• Wafer scrap reduction awareness.
• Participate in CIP programs to improve productivity and quality of equipment/process.
• Coordinate with operators to ensure efficiency of work to meet Mfg and Module objectives

Job Requirements:

• Diploma Electrical / Electronics / Mechanical / Mechatronics / Microelectronics
• Experience in Etch tools / equipment (AMAT / Mattson)
• Able to perform 12-hour rotating shift
• An excellent team player with good interpersonal skill
• Strong logical thinking capability and good analytical skill
• Highly committed with good ownership and accountability
• Passion for the semiconductor / manufacturing industry
• Able to adapt in a fast pace environment and work under pressure
• Proficient in MS Office Applications

Begin your engineering career by enrolling into our 26-month structured Career Advancement Programme (CAP).

This programme sets you on the pathway to become a Accredited BIM Professional for Digital Delivery Management. Your time on our programme counts towards the work experience requirement. Digital skills are crucial in the Built Environment sector. BIM is the way to digitally create and simulate building and infrastructure models before the actual construction.

AcePLP welcomes fresh graduates and mid-careerists from Architectural, Mechanical, Electrical, Civil, BIM, Mechatronics and Engineering with diploma/degree to enrol in our CAP. AcePLP’s 26-months CAP aligns you to the Built Environment career trajectory. It is the most established work-study programme in Singapore with 20-years proven track record of producing thousands of engineering professionals in the Built Environment. CAP Alumni have made valuable contributions in the development and management of digital models for buildings and infrastructure. You will have opportunities to learn on-the-job alongside industry experts and build your expertise after an initial 2-months classroom training with us.

Why Join Us?

We have the most established Work-Study Programme in the Built Environment sector with over 20 years track record.

• An intensive free two-month technical BIM and CAD training will be provided.
• Learn on-the-job as you work across building and infrastructure projects in Singapore with guidance from our experienced Trainers and Resource Managers.
• Build your expertise and widen your professional network with us through our large database of clients, project assignments and alumnus.
• This program counts towards the fulfilment of pre-requisite for the SUSS Bachelor of Building and Project Management and NUS Bachelor of Technology in Engineering, as well as towards the Digital Delivery Management (BIM) accreditation.
• Sponsorship from AcePLP for further studies are available subject to terms and conditions apply.
• Obtain accreditation for your DDM/BIM skills and Specialist BIM Diploma and/or building related Degree after 6 years in the building industry.

Am I an Eligible Candidate?

• Entry level candidates and mid-careerists may apply.
• Strong interest in pursuing a career in the Built Environment Sector.
• Degree/Diploma in Built Environment-related fields: Architecture, Mechanical, Electrical, Civil, Structural Engineering, Green Building & Sustainability, Project or Construction Management and Facilities Management.
• Other qualifications considered: Any engineering subjects, Intelligent Building Technology, Graphic Arts, Visual/Product/Interior Design, Landscape Architecture, Environmental Engineering, Mechatronic, Aeronautical, etc.
• Professionals with prior experience in BIM may request for a skills test to fast-track their development at AcePLP.

You can apply here: https://aces.aceplp.com.sg/apply/nt/

We are a leading Singapore ESCO comprising of a team of process management consultants serving the process industries which include refineries, petrochemicals and power plants.

We recognize that climate change has emerged as one of the world’s biggest environmental challenges. The Company’s Mission is to help customers to build a holistic energy framework to deliver energy efficiency as a business priority, while meeting the strategic objectives of economic competitiveness, environmental sustainability and social responsibility.

We assist our customers to identify and implement process and energy efficiency improvement measures. Improving energy efficiency is regarded as the pillar to achieving sustainable growth. Better energy efficiency will reduce business costs which contribute to economic competitiveness (in the medium-term), will reduce pollution and CO2 emissions linked to climate change.

We have extensive technological and operational experience in the process and power industries. This puts us in a unique position to work with our customers on plant redesign aspects as well as operational and maintenance excellence which also includes making use of Industry 4.0 digital applications.

Visit our website : www.actsys.com

As part of the team, you will identify, evaluate, negotiate and implement energy improvement solutions at major power and process plants in the region. In doing so, you will be able to contribute directly to the reduction of carbon emission to enhance environmental sustainability.

Potential for improvement usually exists in plants which significantly deviate from design point or in plants which do not have efficiency driven condition monitoring maintenance programs. Going back to basic engineering principles, reviewing plants against design and by implementing the appropriate performance monitoring and online dashboard systems, we identify improvement opportunities and help customers to prioritize operational and predictive maintenance measures in a continuous manner.

Analysis could result in further technological investigations, plant changes or investment proposals, thus providing the incumbent with the opportunities of tackling real life technical problems from start to end. Furthermore, the job provides on the job training towards the accreditation of professional engineer status – in Singapore this would be the NEA-IES Energy Efficiency Opportunity Assessor.

We are looking for dynamic, innovative individuals who can work in a team to deliver energy efficiency improvement solutions and to achieve the bigger objective of environmental sustainability. There will be opportunity to travel regionally to Malaysia, China, Indonesia, India and Middle East. Come and be part of our growing team.

DUTIES / RESPONSIBILITIES :

• Apply basic Chemical Engineering principles to establish heat and mass balances of energy systems in power plants, refineries and petrochemical plants
• Familiarization and use of thermodynamic simulation tools to model energy systems and quantify performance gaps
• Carry out energy efficiency improvement retrofit front end engineering design
• Implement online performance monitoring and energy optimization systems

REQUIREMENTS:

• Degree in Chemical Engineering (other disciplines need not apply)
• Preference will be given to candidates who have Process Operations experience
• A strong interest in applying engineering knowledge, skills and principles to real life problems
• A conceptual knowledge of the use of engineering simulation software would be advantageous
• Resourceful and self-driven with excellent interpersonal skills
• Must have strong analytical ability and be detail oriented
• Strong verbal and written communication skills
• Strong organizational and time management skills
• A strong work ethic with a demonstrated record of achievement.
• Highly motivated, internally driven, able to work independently and efficiently in a fast paced environment.
• Microsoft Office and Visual Basic skills
• Malay and/or Mandarin proficiency would be advantageous, but not a pre-requisite

Do you dream of working in a company that is driven by a meaningful purpose? An inclusive company that empowers you to do your best and be innovative?

We are looking for Senior Tender Engineer to make a difference!

This position is accountable for preparing a response to the Request for proposal/Quotation on moderate size and complex Customer’s opportunity, from start to finish, so that the response offered the best Value Proposition. This includes reviewing the RFP/RFQ, determining the scope of works and tasks, determine the best product/equipment/software/services offers, liaising with factories and vendors, challenging the factories and vendors’ offer, costing and determining the market price level, working with various internal stakeholders, i.e. opportunity leader, business leader, project management, engineering, solution purchaser, legal, contract management, solution risk management, analyze risk and opportunities etc. To prepare/revise the offer till the closure of the opportunity, attend and support bid clarification with the opportunity leader, organized Contract Review as well as hand-over package to the project management team. This position is expected to be self driven, taking ownership and initiative to complete the require task within the timeframe agreed with the Opportunity Leader.

At Schneider Electric, we believe access to energy and digital is a basic human right. We empower all to do more with less, ensuring Life Is On everywhere, for everyone, at every moment. We provide energy and automation digital solutions for efficiency and sustainability.

What will you do?

• Take ownership of the tender process and drive the submission of the Offer
• Analyze request for proposals (RFP)/ request for quotation (RFQ) from Customer and determining the scope of works and tasks
• Liaise with factory personnel in preparing proposal packages and advising on technical matters to prospective clients / consultants
• Ensure and comply to following tendering process
• Ensure the specifications of equipment meets with the customer’s requirements and needs;
• Prepare offer documentation consistent with validated data
• Prepare costing as per standard process and tools and submission of Offer within deadline
• Perform risk and opportunity analysis.
• Ensure compliance of Solution Risk Policy and coordinate for approval
• Deliver a winning bid, with a clear scope with accurate technical and commercial commitments in a timely manner and within the defined tender budget that will result in a clearly defined and profitable contract.
• To assist Account Manager (Sales) during technical and commercial clarification pertaining proposal with clients
• Conduct contract review to ensure contract alignment
• Prepare and handover of opportunity to operation team

What qualifications will make you successful?

• Degree/Diploma in Electrical/Power Engineering
• Experience in tendering process preferably more than 5 years experiences in tendering.
• Good Experience and strong knowledge in Electrical Distribution equipment, systems and solutions especially Medium Voltage Switchgear
• Have minimum 3 years of tendering experience in MV switchgears or in offering electrical distribution solution
• Strong knowledge of Electrical Industry, EPC and customer base in various segments such as Oil & Gas, Utility, CIB and other segments.
• Have experience in product, solution, document approval with consultant, utilities, EPC

Responsibilities:

• Perform preventive maintenance work and follow-up on all troubleshooting and repair works
• Ensure all preventive and corrective maintenance, including service report from vendors are documented
• Support ad-hoc machine breakdown including fault troubleshooting, diagnosis and replacement of defective components
• Monitor and maintain spare part list
• Supervising contractors for onsite work involving installation, servicing and repair work
• Proper housekeeping of the tools after usage
• Update list of chemical in the storage and ensure SDS is within validity period
• Liaise with overseas and local supplier for equipment and spare part matters
• Involve in internal and external audits when required
• Any other duties as assigned

Requirements:

• Higher Nitec / Diploma in Electrical/Mechanical/Mechatronics Engineering or equivalent
• Experience in supporting maintenance function in manufacturing environment
• Hands on in troubleshooting plant equipment including electrical, mechanical and hydraulic system
• Experience in robotic system maintenance will be an advantage
• Able to work at height with MEWP
• Able to support after office hours and weekend when needed
• Well verse in Microsoft office applications
• Able to read and interpret schematics

Responsibilities:

· Project coordination and supervision of site installation, testing and commissioning

· Design Development & Calculation for Plumbing, Sanitary and Gas System.

· Preparation of design construction drawings

· Schedule and monitor work program and activity to ensure on-time handover of work and liaise with suppliers/vendors to ensure on-time delivery of materials.

· Work Assessment for Progress Claims and Sub-Contractor’s payment

Requirements

· Diploma / Degree in Mechanical Engineering

· Min 5 years working experiences in design installation and T&C of Plumbing, Sanitary and Gas System

· Good interpersonal communication skill, innovative and result oriented

· Ability to work independently in a challenging and demanding environment

Job Requirements:

§ Degree in Information Technology or equivalent

§ Must have minimum 4-6 years of experience in developing software solutions for Java EE web application and Java UI frameworks

§ Must have 3-5 years of experience in Java/J2EE, Spring and Hibernate

§ Must have experience in Agile Development with a good understanding of Agile delivery

§ Good to have Certifications in Java, Java EE etc

§ Excellent written and verbal communications skills

The Senior Process Engineer will spearhead the design, implementation, and optimization of wastewater treatment processes within our projects. This role involves managing a team of engineers, collaborating with various departments, and implementing cutting-edge technologies to advance project goals. This role requires a deep understanding of chemical, physical, and biological treatment methods, strong project management skills, and a commitment to environmental sustainability.

Roles & Responsibilities:

To lead the process engineers,

• Develop detailed process designs for complex wastewater treatment projects.
• Lead pilot studies and data collection efforts to validate process concepts.
• Create process flow diagrams (PFDs) and piping and instrumentation diagrams (P&IDs).
• Perform detailed calculations related to plant process design and prepare system operation & control philosophy.
• Work closely with multiple disciplines to ensure quality and competitive proposals are developed and delivered on time.
• Support Business Development on technical presentations and/or meetings with potential or existing clients.
• Participate in preparing the design specification, Bill of Quantity (BQ), and Request for Quotation (RFQ) and assist in selecting equipment and components.
• Assist in project implementation, including process-related document preparation and technical clarification with client.
• Participate in testing and commissioning work.
• Any other works as instructed by the company management.

Responsibilities:

• Participate in the design and architecture of software systems, developing efficient and reliable front-end and back-end solutions.
• Use Python and Java for coding and development, ensuring code quality and maintainability.
• Conduct system testing and troubleshooting to ensure software stability and reliability.
• Collaborate closely with algorithm engineers to understand and meet product requirements.
• Participate in code reviews and team collaboration to ensure development efficiency and code quality.
• Engage in the evolution of product microservices, cloud infrastructure, and container architecture, building a stable and competitive product software architecture and implementing it.
• Serve as a software development engineer for 5G and cloud service products, responsible for the design, development, code optimization, or refactoring of related microservices software architecture, and maintaining the product code framework.

Requirements:

• Degree in Software Engineering / Computer Engineering / Computer Science or its equivalent
• At least 5-7 years’ of relevant work experience
• Proficiency in Python, Java
• Experience in cloud platforms and containerization
• Experience with various software development life cycle and development processes
• Strong knowledge of algorithms and database structures
• Resourceful and excellent team player

Job Description

• Develop and create 2D and 3D piping layouts, plans, isometrics, ensure that piping designs are optimized for efficiency, ease of maintenance, and compliance with project and industry standards
• Create detailed piping layouts and general arrangements for the plant, ensuring that pipe routing minimizes interference with other disciplines (civil, mechanical, electrical) and optimizes space utilization
• Collaborate with stress engineers to ensure pipe routing and support arrangements can handle thermal expansion, seismic loads, and pressure differential
• Prepare detailed piping design deliverables, including pipe routing layouts, support details, isometric drawings, and bill of materials (BOM). Ensure designs comply with all relevant standards
• Collaborate with process, mechanical, civil, and electrical teams to ensure seamless integration of piping designs with other plant systems
• Work closely with the procurement team to prepare piping material specifications, liaise with suppliers for quotation and support vendor evaluations for piping components (valves, flanges, supports, etc.)
• Review piping installation drawings and provide feedback for improvement to ensure constructability
• Conduct site visits as needed to verify piping installations are in accordance with the approved designs

Requirements

• Diploma/Degree in Mechanical Engineering
• For Degree holder, minimum 5 years of experience in piping design. For Diploma holder, minimum 8 years of experience is required. For senior position, candidate must have at least 10 years of experience
• Must be a self-starter and be able to work with minimal supervision, make sound decisions, take independent action, and provide focused solutions to assigned projects
• Possess strong inter-personal and communication skills and be able to work well with people at all levels in the organization
• In-depth knowledge of piping design codes and standards (ASME, ANSI, PUB regulations)
• Must have advanced computer literacy in commonly usedsoftware applications such as Navisworks, Bentley View, AutoCAD, piping design & drafting tools and MS Office
• Experience in process plant (such as wastewater treatment plant, sludge incineration plant, etc.) is preferred

Job Description

• Prepare and submit MSRA prior to the commencement of work
• Liaise with SO team to clear off inspection.
• Lead the site supervisor in clearing off site inspection, and to check and ensure that the work is carried out safely as per drawing, and is of good quality.
• Coordinate with subcontractor to resolve the issues and to ensure that the work is carried out as per approved MSRA & design, and to meet the schedules.
• Check and ensure all the temporary work is carried out as per PE design.

Requirements

• Degree in Civil, Mechanical or Electrical, or a related field.
• Min 2 to 3 Years Relevant Work Experience (MEICA)
• Proficient in English writing and speaking.
• Microsoft application (words, excel, ppt etc)

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Validation Engineer
• Working Location: Tai Seng
• Working Hours: 5 days (Monday to Friday, 8.30 AM – 6 PM)
• Salary Package: Basic Salary up to $6,000 + AWS + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Assist Quality and Validation Manager Asia to complete the tasks on time with good quality.
• Responsible for the successful execution of the Validation functions for customer projects, as required – Quality, Cost, and Time.
• Responsible for driving and supporting the project team for projects where validation is required and ensuring execution complies with company's standards.
• Provide training on qualification activities.
• Responsible for maintaining qualification documentation standards and procedures.
• Create and maintain qualification/validation documentation from the design phase of projects for mechanical, software, and hardware parts.
• Lead the qualification/validation activities of projects (risk analysis, protocol drafting, and test execution during FAT/SAT) internally and at our partners' sites (approximately 20% of the time on travel throughout the year).
• Any other ad-hoc duties as assigned.

APPLY NOW!!!

• Diploma/Degree in Mechanical Engineering or equivalent
• Has 2 years of working experience in quality or validation of automated systems (mechanical, software, hardware) or equivalent
• Prior work experience in control systems design is advantageous
• Excellent understanding of assembly, test & debug procedures

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #69403 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Description

• Industry/ Organization Type: Building & Construction
• Position Title: Site Engineer
• Working Location: Pioneer
• Working Hours: 5.5 working days (Mon to Fri 8 AM – 5 PM, Sat half day)
• Salary Package: Basic Salary up to $6,500 + AWS + Variable Bonus + Transport Allowance
• Duration: Permanent

Key Responsibilities

• Handle daily construction activities, ensuring works progress according to the project schedule, design, and safety standards.
• Provide technical support and guidance to construction workers, subcontractors, and other engineers on-site.
• Ensure that construction methods and materials used meet project specifications and quality standards.
• Coordinate with project managers, contractors, and other team members to ensure smooth and successful execution of the project.
• Conduct regular inspections of construction activities to ensure the quality of work meets industry standards and the specific requirements of the project.
• Any other ad-hoc duties as assigned.

APPLY NOW!!!

• Minimum Diploma in Civil Engineering or related qualification
• Has experience with the Land Transport Authority (LTA), Strategic Planning Policy Group (SPPG), or Defence Science and Technology Agency (DSTA)
• Prior experience with road and airfield runway construction and resurfacing is required
• Proficient in MS Office
• A class 3 driving license is required

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #69580 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

1. A Degree in Engineering(Civil and/or Structural) from local universities or universities recognised by the Professional Engineers Board.
2. At least five (5) years of practical working experience in the related field in building construction projects.
3. Report to Technical Manager, and assist in managing, planning and coordinating civil and structural works to meet time, cost and quality objectives.
4. Coordinate design and/or detailing with consultants, develop shopdrawings, review of submissions from subcontractors and liaise with other work disciplines.
5. Proficient in REVIT and AUTOCAD software applications.
6. Positive attitude, self-motivated, initiative and responsible.
7. Good communication and interpersonal skills.
8. Able to work independently.
9. Candidates with more than eight (8) years of relevant experience may be considered for senior positions.
10. Remuneration shall commensurate with qualifications and experience. Basic salary: $3,500 to $6,000, plus allowances.

Brief Job Description Role Profile

As an EO Associate Engineer, you will be responsible for Electro-optics system site support, perform troubleshooting, fault diagnosis and failure analysis to determine the cause of failure for the system. Diagnose and repair EO system issues in lab by using logical, step-by-step approaches to ensure minimal downtime for the customers.

Key Responsibilities

• Support the team on Electro-optics and surveillance systems for preventive and corrective maintenance at sites and vessels

• Update all fault reporting documentation for monthly project meeting

• Liaise with customer for maintenance activities

• Perform in house repair of Electro-Optics equipment

• Perform rotational 24x7 standby services for fault recovery works at various locations

• Able to work offshore and work at height

• Support system setup, testing and installation

• Perform other duties as assigned by superior

Knowledge, Skills and Abilities

• Min ITE certificate / Diploma in electrical / electronic / computer engineering

• Experienced in Electro-optics System will be an added advantage

Personal Attributes

• Positive work attitude, self-motivated, creative, and resourceful with a customer first mind set

• Independent, hardworking, and able to work under pressure

• Able to handle emergency situations outside of normal work hours when required

• Good inter-personal, organizational, problem solving and teamwork skills.

Construction Engineer Responsibilities:

• Managing the planning and design stages of construction projects.
• Contributing technical expertise to project drawings and designs.
• Performing cost calculations and preparing financial projections.
• Preparing work schedules in collaboration with the project manager.
• Liaising between contractors, subcontractors, vendors, and suppliers.
• Overseeing construction engineering processes.
• Performing regular tests on materials and procedures to ensure compliance with industry regulations.
• Ensuring that the construction project is completed on time and within budget.
• Documenting processes and keeping detailed construction logs.
• Presenting construction project progress updates to clients and senior managers.

Construction Engineer Requirements:

• Bachelor's degree in civil engineering, civil engineering technology, or similar.
• State-approved license.
• At least 2 years experience as a construction engineer in the relevant field of specialization.
• Advance proficiency in construction management software, such as BuildSmart and Smartsheet.
• In-depth knowledge of construction industry regulations.
• Exceptional leadership, project management, decision-making, and problem-solving skills.
• Great mathematical, organizational, and time-management skills.
• Excellent written and verbal communication skills.
• Ability to collaborate with a variety of stakeholders.
• Availability to visit the construction site outside of business hours, when relevant.