Roles and Responsibilities

• Design, maintain and administer the Company's quality training programs.
• Prepare curriculum, training material and recurrent training material to a defined standard.
• Teach formal classroom training courses such as but not limited to policy, procedures, maintenance paperwork, safety, Human Factors, airworthiness regulations, recurrent training and other subjects.
• Revise training curriculum and serve as subject matter expert.
• Design, maintain and administer GE Aviation – Singapore’s Quality System.
• Initiating, updating and maintaining QCWIs and other quality documents as and when required.
• Be in control of the Technical Library. Assure all data are up-to-date and that revisions are distributed to all Engineers affected.
• Facilitate all regulatory and customer audits, work with the appropriate functions in the formulation of corrective actions.
• Support the training and qualification of Certifying Staff.
• Be responsible for the archival of maintenance records. Supervise a team of Technicians in the scanning of maintenance records and ensuring the operability of the scanning equipment.

Required Qualifications

• Degree in Engineering
• 3 or more years of Experience with Quality Systems
• Certified Part 145 or equivilant
• Minimum 2 years of aerospace experience in repair/manufacturing or a quality assurance role.

Desired Characteristics

• Holds a recognized Lead Auditor or Internal Auditor certification.
• Knowledge of Quality Systems/ISO/Aerospace Standards.
• Possess CAAS Air Legislation paper.
• Knowledge of basic engineering and aircraft engine component repair.
• Good auditing experience.
• Good command of written and spoken English.
• Basic knowledge of PC software.
• Good initiative and analytical skills.
• Strong attention to detail and accuracy.
• Ability to communicate at all levels of the organization.
• Demonstrate oral and written communication skills.
• Strong interpersonal and leadership skills.

As a Senior Equipment Engineer/Equipment Engineer in the NTI, you will be expected to support R&D activities associated with rapid deployment of First-of-Kind equipment, the CIP hardware evaluations and managing on the timeline needed to deploy in current technode/next advance technode on time. Good team spirit and good collaborations working is needed with various stakeholders including (not limited to) facilities/fab support/Gas & Chemical/EHS/F4/F10/Central team etc with various equipment setup and improvement work necessitated thereof as well as to ensure extended engagement with F4 on the upcoming First-of-Kind equipment in upcoming technode. Expected to work independently with minimal direction and complete projects in a timely manner and achieve set objectives.

Responsibilities

• Leading the design, development and characterization of new tools and identifying and closing any hardware and procedural gaps.
• Innovate solutions that enable best in class performance
• Oversee installation and upgrades of tools ensuring quality of work, cost control and alignment to project schedule.
• Engage equipment vendors to improve current products and implement roadmap needs.
• Work with Process Engineers, Manufacturing, Procurement, and Vendor partners to develop a comprehensive package capable for our volume manufacturing sites.
• Generating and maintaining documents that outline equipment performance, operating procedures, maintenance specifications, and cost metrics.
• Support Internal And External Audits

Requirements:
• A minimum of 2-3 years of experience in the semiconductor industry in the area of equipment engineer roles.
• In-depth understanding of the equipment operation, working principles, troubleshooting and tool installation procedure is a must.
• Exposure to R&D equipment transfer and ability to develop/optimize equipment hardware design is preferred.
• Communications and collaboration with partners both locally and globally. Strict adherence to Micron Intellectual Property protection policy is a must.
• Self-motivated and adaptable to Micron’s fast paced, demanding and dynamic work environment; flexibility to work for extended hours, as required.
• Excellent oral and written communication skills with ability to convey the message clearly and sharply both locally and globally.
• Excellent ability to prioritize and manage multiple projects simultaneously; efficiently utilize available resources or seek peers’ and/or management help to get over the roadblocks to drive to solutions.
• Encourage and enforce safe, compliant behavior through periodic communications and the performance management process.

GJS for this position: E2 and above

Location: Fab10N

Closing Date: Until filled

Job Description

• Industry/ Organization Type: Audio Visual (AV) Solutions Provider
• Position Title: Sales Engineer
• Working Location: Kallang
• Working Hours: 5 Days (Mon – Fri, 9am – 6pm)
• Salary Package: Basic Salary + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Drive sales performance to meet targets and maintain client relationships.
• Engage in B2B sales activities, identifying new opportunities and guiding them to closure.
• Collaborate with business partners and work with the internal AV Design Team to tailor solutions to client needs.
• Negotiate pricing with partners to ensure competitive bidding.
• Compile and deliver weekly sales reports (specific to Assistant Sales Manager role).
• Aid in managing relationships with manufacturers for audio and related solutions.
• Target primary markets within the hospitality and education sectors.
• Seek and establish partnerships for audio solutions to broaden offerings for existing clients.
• Focus solutions on Pro Audio Solutions for large venues such as theatres and auditoriums.

APPLY NOW!!!

• Minimum Diploma in any discipline.
• At least 1-2 years of relevant experience in the AV Industry.
• Proven sales experience in a B2B setting and project-based environment is preferred.
• Familiarity with Pro sound solutions for large venues, Audio & Visual, videoconferencing, and telephony solutions is an added advantage.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70802 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Rachael Lee | EA Reg No.: R2093131

Fabrica AI is reinventing how robots are developed. Currently novel robots take 5-20 years. We are building a design automation platform to bring it down to a month, and have already demonstrated significant progress by developing tile grouting robots in record time. Robotics simulation and reinforcement learning has been advancing a lot making it 1000x cheaper to train robots compared to 5 years ago, and as Jensen Huang said at Nvidia GTC 2024, "the ChatGPT moment for robotics may be just around the corner." A couple other companies are building on the same paradigm shift but we are the only ones using it to automate hardware design, not just software.

Building robots and a design automation platform together brings great synergy - the platform helps us develop robots faster than anyone else and the robots allow us to gather data and do experiments at scale. Data gathering can be done through partnerships with other robotics companies, but doing experiments is crucial for grounding the platform in reality and ensuring its usefulness. The grouting robots are already deploying daily at construction sites and bringing value to clients. We are currently negotiating sales worth around 500k USD. With manufacturing cost multiple times lower than companies using a traditional robotic arm, our robots have an ROI in weeks. Our robot is also small and simple to use, operating from a single button without the need to upload floorplans or do any complex setup. Soon we would be expanding into other simple and valuable robots for the construction industry.

We’ve raised over 2.5m USD from Hoxton Ventures, Credo Ventures, our Professor from Cambridge University, Woh Hup, and the owner of BHCC (listed construction company). We’ve 2500sqft of space in Singapore where we have over 20 team members, and 1200sqft of space in Czechia where we have our software team.

Jakub Suchanek (CEO) has an engineering degree from the University of Cambridge and experience working on self-driving cars at Wayve and machine learning at Granta Innovation and Wacker. He is a worldwide winner of NASA SpaceApps and has won bronze medals in International Olympiads in Informatics and Physics.

Ronald Luc (CTO) earned a degree in Math and Computer Science from Masaryk University, where he was a teaching assistant, and supervised several deep learning theses. He has years of industry experience in both machine learning and self driving cars. With Jakub he won TechFest Munich, one of the EU’s top hackathons; and represented Czechia at the International Olympiad in Informatics.

Keefe Wayne Teo (COO & CFO), a University of Cambridge engineering graduate, served as president of Hackbridge.io, promoting entrepreneurship in tech. He has 100+ citations in research journals and four papers on sustainable energy. He previously worked at Entrepreneur First and has business development experience from other companies.

Website: https://www.fabrica.ai/ (and various press releases, awards, etc.)
Latest Grouting Robot Demo: https://www.youtube.com/watch?v=AVWjmaMuYM0

Fabricator videos

https://www.youtube.com/watch?v=4aoQ4QaEOPQ

https://www.youtube.com/watch?v=xnENP7zWzEM

https://youtu.be/qXpkFeEidac

https://www.youtube.com/watch?v=5SBiEBLMQ9k

Your internship would revolve around real-world industry deployments taking us from a TRL of 7 to 9. You may be remunerated with a combination of salary and share options. As an SGInnovate partner company, we can offer a monthly S$3000 SGD in stipend under the SGI Summation program for undergraduates, more for masters, PhD students. The following tracks are available, you would probably be doing a couple of them up to your preference, with examples of what has been done by previous interns:

Your role will include (*you don’t have to be proficient for all of them*):

Core responsibilities:

• PCB, electronics design
  • Working with both hobbyist and industrial microcontrollers, single board computers, motor drivers etc.
  • Integrating motor systems of different types (DC, BLDC, with encoder feedback…), sensor modules etc.
  • PCB design
• Embedded programming

Possible additional responsibilities:

• Testing our robot on construction sites
• Managing external PCB production
• Harness design
• Overseeing a team doing all the above

Requirements:

• Experience with electronics design and embedded software at at least one industrial level project
• Value the direct impact on the product and proximity to clients at a startup and the growth potential of a startup more than having a stable job at a reputable company
• Willing to work without a very well defined job scope and willing to adapt to changes week on week
• Ability to think of metrics to measure progress and deciding based on back on the envelope calculations
• Keenness to do more than is expected, impact driven, past side projects
• Excited about robotics and similar technical areas and exploring them in work and other projects
• Growth mindset driven

Our development process is very iterative and agile. Thus your role/tasks is/are likely to evolve over time. You would play a significant part in deciding how your work would contribute to our overall goals. Besides, a lot of testing has to be done on a construction site. If you like this process, you’d be a good fit for us. Check out the link above for more information, and send your CV to [email protected]

Are you ready to accelerate your potential and make a real difference within life sciences, diagnostics and biotechnology?

At SCIEX, one of Danaher’s 15+ operating companies, our work saves lives—and we’re all united by a shared commitment to innovate for tangible impact.

You’ll thrive in a culture of belonging where you and your unique viewpoint matter. And by harnessing Danaher’s system of continuous improvement, you help turn ideas into impact – innovating at the speed of life.

As part of SCIEX, you will help to influence life changing research and outcomes, while accelerating your potential. For more than 50 years, we have been empowering our customers to solve the most impactful analytical challenges in quantitation and characterization through ground-breaking innovation and outstanding reliability and support. You will be part of a winning team, enabled by DBS, that is passionate about helping life science experts around the world get to answers they can trust.

Learn about the Danaher Business System which makes everything possible.

The Principal Engineer, Supplier Quality is responsible for driving Quality performance of the suppliers to meet Sciex Product Quality requirements through supplier qualification processes, supplier control processes, aligned with supplier management strategies.

This position reports to the Senior Manager Supplier Quality and is part of the QARA team located in Singapore and will be an on-site role.

In this role, you will have the opportunity to:

• Drive improvement of quality performance of suppliers and support NPD/NPI project, ensure resolution of the issues identified in NPI.
• Lead supplier qualification activities for new suppliers with Global Sourcing & Global Supply Chain.
• Plan and execute periodic audits at suppliers' site to ensure suppliers' QMS is meeting ISO standards, IPC standards, FDA QSR (GMP) and compliance to agreed process control plans
• Monitor supplier performance, review periodic quality data/reports/scorecards and related action plans
• Drive resolution of complex material quality issues by deep diving suppliers' root cause analysis and by working with suppliers to monitor corrective action and facilitating with internal support where required.

The essential requirements of the job include:

• Degree in Electrical/Electronics/Mechanical Engineering with of 5-8 years related experience in Supplier Quality Management, Process Engineering is preferred
• In Depth knowledge of PCBA manufacturing processes, familiar with IPC 610 standards
• Demonstrated experience on the performance of audits, lead-auditor certification preferred
• Familiar with problem solving tools such as 5 why root cause analysis, and Quality tools such as DFM, PFMEA, GR&R, Control Plan, SPC.
• Knowledge of ISO 9001, ISO13485 and FDA 21 CFR Part 820 will be added advantage

Travel Requirements:

• Ability to travel – 20-30%, and maybe travel on short notice

It would be a plus if you also possess previous experience in:

• Managing suppliers including supplier evaluation and supplier performance
• Broad knowledge of manufacturing operations and quality system practices in a Medical Device or Pharmaceutical company is preferred

SCIEX, a Danaher operating company, offers a broad array of comprehensive, competitive benefit programs that add value to our lives. Whether it’s a health care program or paid time off, our programs contribute to life beyond the job. Check out our benefits at Danaher Benefits Info.

Assurity Trusted Solutions (ATS) is a wholly owned subsidiary of the Government Technology Agency (GovTech). As a Trusted Partner over the last decade, ATS offers a comprehensive suite of products and services ranging from infrastructure and operational services, authentication services, governance and assurance services as well as managed processes. In a dynamic digital and cyber landscape, where trust & collaboration are key, ATS continues to drive mutually beneficial business outcomes through collaboration with GovTech, government agencies and commercial partners to mitigate cyber risks and bolster security postures.

We are looking for a Senior Cloud Infrastructure Engineer (Device Management) to join us!

Responsibilities:

Work with Product Owners, internal engineering team and Product Principals to oversee and co-ordinate the operation of various endpoint management tools, including:

1. Windows Autopilot
2. Intune
3. Application control
4. Scripting and automation
5. Virtual Desktop Infrastructure
6. Microsoft Graph API

• Co-ordinate with Central ICT Infra teams to operate the on-prem components of the above platforms.
• Oversee a team of Ops Engineers to manage the change, release, incident, problem management processes.
• Ensure timely handling of requests and queries.
• Lead incident response and recovery by analysing the root cause and submission of RCA report.
• Drive improvement in operation effectiveness by implementing the monitoring and alerting tools.
• Document the requirement and specification to address the needs for all Public Service agencies

Mandatory Requirements:

• Exam: Microsoft 365 Certified: Endpoint Administrator Associate, for demonstrating the skills and knowledge of endpoint management and security using Microsoft 365 tools and services.
• Proficient in PowerShell scripting

Additional Skillset(s) (Good to have):

• Prior experience in developing Windows desktop applications using C#, .NET
• Familiar with developing ServiceNow workflows
• Endpoint monitoring and observability for infrastructure reliability using tools such as NexThink, Riverbed, Dyatrace...etc

Additional 2 or more certifications (at least one from each group):

Group 1

1. DevOps Institute: Site Reliability Engineering Foundation or Site Reliability Engineering Practitioner, for demonstrating the skills and knowledge of applying DevOps principles and practices to the endpoint engineering process
2. ITIL 4 Foundation Certification, for demonstrating the skills and knowledge of the ITIL framework and best practices for ITSM.
3. Certified Information Systems Security Professional (CISSP) or CompTIA Cybersecurity Analyst (CySA+)

Group 2

1. Exam MS-102: Microsoft 365 Administrator: deploys and manages Microsoft 365 and performs Microsoft 365 tenant-level implementation and administration of cloud and hybrid environments
2. Exam AZ-104: Configure, manage, secure, and administer key professional functions in Microsoft Azure.
3. Exam AZ-140: Plan, deliver, manage, and monitor virtual desktop experiences and remote apps on Microsoft Azure for any device.
4. UiPath Certified Professional Automation Developer Associate or PL-500 Microsoft Certified: Power Automate RPA Developer Associate

Requirements:

• Comfortable with a 5-year direct contract (with perm benefits)
• At least 5 years of experience in the above domain areas

Join us and discover a meaningful and exciting career with Assurity Trusted Solutions!

The remuneration package will commensurate with your qualifications and experience.

We thank you for your interest and please note that only shortlisted candidates will be notified.

By submitting your application, you agree that your personal data may be collected, used and disclosed by Assurity Trusted Solutions Pte. Ltd. (ATS), GovTech and their service providers and agents in accordance with ATS's privacy statement which can be found at: https://www.assurity.sg/privacy.html or such other successor site.

Benefits

• A wholly-owned subsidiary of GovTech.
• We promote a learning culture and encourage you to grow and learn.
• A competency framework is in place to help you grow your career with us.

• One onsite (SGP) Techno-Functional resource with at least 7 years’ experience in .Net, React, SQL server, Web API
• Strong in both Functional and Technical Skills in .Net, React, SQL server, Web API
• Able to gather requirements from business and write Functional specifications
• Good Communication Skills
• Able to do 24/7 support and after office-hours support when required

To Apply:

Interested candidates, please click Apply.

We regret to inform that only shortlisted candidates will be notified.

Seah Irvin | REG No : R23112821

PERSOLKELLY SINGAPORE PTE LTD | EA License No : 01C4394

This is in partnership with Employment and Employability Institute Pte Ltd (“e2i”). e2i is the empowering network for workers and employers seeking employment and employability solutions. e2i serves as a bridge between workers and employers, connecting with workers to offer job security through job-matching, career guidance and skills upgrading services, and partnering employers to address their manpower needs through recruitment, training and job redesign solutions. e2i is a tripartite initiative of the National Trades Union Congress set up to support nation-wide manpower and skills upgrading initiatives. By applying for this role, you consent to e2i’s PDPA.

By sending us your personal data and CV, you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for account creation in GO and the purposes set out in the Privacy Policy https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with GO’s Terms of Use https://go.persolkelly.com/Tac and the Privacy Policy. If you wish to withdraw your consent, please email us at [email protected]. Please feel free to contact us if you have any queries.

Job Description

• Industry/ Organization Type: IT Consultancy Firm
• Position Title: IT Sales Executive/ Sales Engineer
• Working Location: Ang Mo Kio
• Working Hours: Monday to Friday, 9am – 6pm
• Salary Package: Up to $4,000 + Commission + AWS + Bonus
• Duration: Permanent

Key Responsibilities

• Drive growth and meet sales targets by acquiring new customers.
• Develop and implement a strategic sales plan to expand the customer base.
• Provide sales, revenue, and expense reports, along with realistic forecasts, to the management team.
• Recognize emerging markets and market changes while staying informed about new products and competitive landscape.
• Comprehend the characteristics of our ideal customers and their connection to our products.
• Foster and maintain strong, long-term customer relationships by collaborating with them and addressing their needs.

APPLY NOW!!!

• Minimum Diploma in IT, Computer Science or related discipline.
• At least 2 years in Enterprise Software/ Security Software channel sales or channel partner development.
• Able to travel to Asia Pacific countries as and when needed.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70399 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

· Must have minimum 5 years’ experience.

· Strong technical knowledge and experience in supporting enterprise-level applications.

· Proficiency in troubleshooting application issues, performing log analysis, and using monitoring tools.

· Experience with databases and SQL query language.

· Familiarity with software development life cycle (SDLC) and ITIL principles.

· Excellent problem-solving and analytical skills.

· Effective communication and collaboration abilities.

Preferred Skillset

· Java

· Oracle Database

· MySQL Database

· Jira

· Excel

· Hosting Platform

Our vision is to transform how the world uses information to enrich life for all.

Micron Technology is a world leader in innovating memory and storage solutions that accelerate the transformation of information into intelligence, inspiring the world to learn, communicate and advance faster than ever.

Responsibilities

• Process module ownership involving regE process characterizations and advanced process developments for 3D NAND and beyond.
• Work with process development engineers in Singapore and Boise, US TD site and vendors to develop regE processes that meet integration requirements for next-generation 3-D NAND nodes.
• Transfer regE processes to high volume manufacturing (Fab10), and work on continuous improvements to manufacturability.
• Address specific wafer edge issues (such as bevel defects, uniformity issues), working with Fab10N team and with key business partners on tool choices for manufacturing, evaluations etc., as applicable.
• Focus on understanding and improving regE process margins required for meeting the mature yield goal for 3D NAND parts.
• Initiate and manage experiments to widen regE process margins as well as to test out manufacturability of next node solutions
• Incorporate best known manufacturing methods into early development phase of upcoming nodes.
• Design and implement advanced process monitoring and control methodologies.
• Serve as a technical expert within Micron contributing to technical projects for improvements to processes, procedures and equipment.
• Define and leads complex, multi-functional projects of critical importance to Micron, helps to define strategic direction.
• Lead team or sites or suppliers on complex, multi-disciplinary projects in quality focused meetings, process and yield improvement meetings, cost and productivity improvement meetings
• Provide advice and counsel to management on significant technical issues. Leads and initiate innovation projects through patents/technical papers.
• This position requires communications and collaboration with partners both locally and globally. Strict adherence to Micron Intellectual Property protection policy is a must.
• Be part of the continuous worldwide TD engagement with suppliers pushing for breakthrough solutions.

Requirements

• Bachelors’ degree or higher in Materials Science, Chemical Engineering or Physics with minimum 2 years hands-on experiences in relevant regE process developments.
• Familiarity with regE process developments and yield improvements.
• Understanding of various integration and structural impacts and constraints related to wafer edge.
• An understanding of the general process steps and process flow for memory processing, planar and vertical NAND memory in particular.
• Working knowledge of data analysis systems e.g.: Y3 to facilitate analysis of experimental data
• Working knowledge of Design of Experiments (DoE)
• Proven ability to collaborate with local and overseas teams on projects
• Excellent oral and written communication skills with ability to convey the message in concise and effective manner both in local as well as remote communications.
• Ability to be a self-motivated individual and be adaptable to Micron’s changing needs in terms of working extended hours, if required
• Proven ability to work in a demanding & dynamic environment and able to prioritize and manage multiple projects simultaneously
• Ability to travel for extended periods of time and stay at Boise TD for 4-6 months at a stretch to work on technology development.

What you will do:

The Systems Applications Engineer, National Accounts will Provides sales support to the engineering and sales team. Conducts engineering design and processes and / or financial analysis during project development. Generates take-off plans and specifications. Develops and writes estimates or proposals. May call on potential customers as directed by sales managers.

How you will do it:

• Oversee the application engineering team, providing configuration, enhancement, and support for technical documentation and presentations to clients.
• Customize and introduce new features to Metasys software and in-house developed applications based on end-user requirements.
• Design and construct new applications tailored to meet customer specifications and needs.
• Guide application engineers in writing and executing tests on complex programming, troubleshooting issues as they arise, and supporting product launches.
• Provide technical support and troubleshoot application issues while performing tests on complex programming and assisting in product launches.
• Assist the application manager in process improvements to enhance productivity and efficiency.
• Collaborate with system integrators (SI) to monitor their performance with quality assurance/quality control checks and ensure completion sign-off.
• Manage vendor relationships, including scoping application services and reviewing deliverables.
• Collaborate as part of a design, engineering, and operations team.
• Knowledge of ACMV and controls associated with Johnson Controls Metasys will be advantageous.
• Deliver customer support by responding to technical queries with detailed analyses of building management systems, tooling costs, and design/process improvements to meet all customer needs.
• Collaborate with engineering, sales, and operations teams to understand standard fabrication techniques, composite materials, and customer demands to develop design details.
• Create and present technical engineering information based on customer proposals, including 3D representations of products and tooling.
• Prepare cost estimates by analyzing blueprints, customer documents, and consulting with engineers and technical personnel.
• Conduct conceptual designs of composite components and assemblies to support proposals.
• Generate accurate CAD models of components and assemblies.
• Develop detailed bills of materials for proposals.

What we look for:

• Bachelor's Degree in Engineering with a minimum of 5 years of relevant experience in Access, Intrusion, and Video Management systems
• Demonstrate strong verbal and written communication skills, including the ability to efficiently articulate technical subject matter
• Good communication skills, with an ability to express and understand complex technical concepts.
• Experience of working with globally distributed teams & matrixed environment

What we offer:

• Competitive salary in a MNC environment
• Comprehensive benefits package
• On the job/cross training opportunities
• Encouraging and collaborative team environment
• Dedication to safety through our Zero Harm policy

As a Senior NAND Cell Device Engineer, in the Singapore Device Technology Development group of Micron Technology Inc., you will be responsible for electrical characterization of the NAND memory cell and develop novel device solutions for cutting-edge 3D-NAND flash technologies. You will have an exciting opportunity to develop best-in class non-volatile memories and products in the world!

Job responsibilities:

• Develop an understanding of performance & reliability requirements for new NAND cells and help refine requirements, as necessary.
• Characterize NAND Memory cell and array properties to identify device improvement directions.
• Analyse automated tester data to establish product qualification gaps, identify new device corners and improve detection capabilities.
• Contribute to the architecture and process definition for state-of-the-art NAND cell, by providing expertise in NAND device physics and array operation.
• Collaborate effectively with process, integration, product, and design engineers, to address NAND memory cell deficits and deliver improvement roadmaps.

Requirements:

• M.S or Ph.D. in Electrical or Electronics Engineering, Physics or Materials Science Engineering or similar.
• 3+ years of work experience in CMOS or non-volatile memory is preferred.
• Deep understanding of semiconductor device physics and processes.
• Knowledge of statistical methods for experiment design and data analysis.
• Solid communication and reporting abilities.
• The ability to be highly skilled at driving for results.

As a Process Engineer you will be primarily responsible for starting up, developing and optimizing processes to improve product quality and reliability, working on process yield improvement, cost reduction, productivity improvement and risk management as well as resolving manufacturing line problems. You will also be required to identify, diagnose and resolve assembly process related problems by applying failure analysis, FMEA, 8D or SPC/FDC methodology. Additional responsibilities include coordinating and carrying out process, equipment and material evaluation/optimization/development to implement changes at process step, leading and participating in yield improvement and cost reduction activities, handling new process baseline qualifications and managing, auditing and liaising with equipment/material suppliers to achieve yield, quality, cost and risk management objectives.

Micron’s NAND Technology Integration (NTI) Singapore R&D group is looking for process development engineer to support R&D activities associated with rapid deployment of technology nodes, the process margin improvement work necessitated thereof as well as to ensure extended engagement with manufacturing on the upcoming technology nodes.

Responsibilities

• Develop and optimize unit processes to meet the yield and quality requirements of advanced NAND products.
• Quantify benefits of innovative process and/or equipment solutions to enable early experimentation and adoption for process margin improvement
• Prioritize within Singapore based manufacturing CVD/PVD teams on the key technology issues that need R&D breakthroughs.
• Integrate and troubleshoot processes as part of cross-functional teams driving yield and quality improvement
• Participate with Boise R&D Films peers on technology choices for the upcoming nodes and able to translate future technology device needs into clear process requirements
• Identify disruptive processes early on and work with manufacturing and Boise R&D to identify viable path forward
• Process development will include performing fundamental research, hardware evaluations, as well as testing processes for novel applications and generating intellectual property relevant to Micron.
• Initiate and manage experiments to widen process margins as well as to test out manufacturability of next node solutions
• Identify process simplification opportunities and drive cross functional teams in implementation
• Incorporate best known manufacturing methods into early development phase of upcoming nodes.
• Design and implement advanced process monitoring and control methodologies.
• Serve as a technical expert within Micron contributing to technical projects for improvements to processes, procedures and equipment.
• Lead team or sites or suppliers on complex, multi-disciplinary projects in quality focused meetings, process and yield improvement meetings, cost and productivity improvement meetings
• Provide advice and counsel to management on significant technical issues. Leads and initiate innovation projects through patents/technical papers.
• This position requires communications and collaboration with partners both locally and globally. Strict adherence to Micron Intellectual Property protection policy is a must.
• Be part of the continuous worldwide R&D engagement with suppliers pushing for breakthrough solutions.

Requirements

• Master degree or higher in Materials Science, Chemical/Microelectronic Engineering, or Physics with minimum 3 years hands-on experience in leading edge film deposition/implant technology work. Fresh PhD/Masters graduates in Materials Science, Chemical/Microelectronic Engineering or Physics are also welcome to apply.
• A deep understanding of chemical kinetics, thermodynamics, physical phenomena and their direct application to CVD/PVD deposition in various deposition methods.
• An ability to understand and troubleshoot precursor depletion effects within three dimensional structures and come up with innovative ideas to mitigate the effects.
• Basic understanding of films and interface engineering and analysis techniques thereof – SIMS, XPS, EDX, SEM/TEM.
• Understanding of various integration and structural impacts and constraints related to film deposition processes.
• An understanding of the general process steps and process flow for memory processing, planar and vertical NAND memory in particular.
• Working knowledge of data analysis systems e.g.: Y3 to facilitate analysis of experimental data
• Working knowledge of Design of Experiments (DoE)
• Proven ability to collaborate with local and overseas teams on projects
• Excellent oral and written communication skills with ability to convey the message in concise and effective manner both in local as well as remote communications.
• Ability to be a self-motivated individual and be adaptable to Micron’s changing needs in terms of working extended hours, if required
• Proven ability to work in a demanding & dynamic environment and able to prioritize and manage multiple projects simultaneously
• Ability to travel for extended periods of time and stay at Boise R&D for 4-6 months at a stretch to work on technology development.

Job Description

• Industry/ Organization Type: High Speed Networking Service Provider
• Position Title: Field Service Technician/ Engineer
• Working Location: Ubi (Nearest MRT: Tai Seng) – Company transportation provided to travel to client location
• Working Hours: Monday to Friday, 9.00 am – 6.00 pm
• Salary Package: Up to $3000 + OT (Dependent on project) + Performance Bonus
• Duration: Permanent

Key Responsibilities

Field Service Engineer

• Work as part of a team to install, test, and commission company equipment, ensuring all systems are fully operational and meet client expectations.
• Assist with the setup and configuration of network-based systems, ensuring connectivity and functionality.
• Set up and configure security surveillance systems and access control systems, ensuring proper functionality and client satisfaction.
• Install and maintain radio communication equipment, ensuring uninterrupted communication services.
• Regularly service and maintain installed equipment to ensure optimal performance, including troubleshooting and repairs when necessary.
• Assist in project planning, coordination, and execution, ensuring timely completion of assignments.
• Participate in on-the-job training under senior engineers, developing your technical skills and expanding your field of expertise.

Field Service Technician

• Perform accurate installation and laying of electrical cables to ensure proper connectivity, adhering to industry standards and safety protocols.
• Assist in the testing and commissioning of electrical systems, ensuring that all equipment is safely operational and meets performance standards.
• Conduct routine general maintenance on installed electrical systems and equipment to maintain optimal functionality and reduce downtime.
• Diagnose and fix electrical faults and malfunctions, ensuring that issues are resolved promptly to minimize disruptions.
• Follow all safety regulations and protocols to ensure a safe working environment, including the proper use of personal protective equipment (PPE).
• Work closely with other technicians and engineers to complete tasks efficiently and effectively, ensuring all project goals are met on time.
• Training & Development: Participate in ongoing training programs to stay updated on the latest industry trends, electrical techniques, and safety standards.

APPLY NOW!!!

• Min. NITEC in Electronic or Electrical
• 1 year’s experience working with security surveillance systems, access control, or radio communication equipment preferred
• Training provided for those without experience
• Class 3 driver’s license preferred

Please apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #70103 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Markus Tan | EA Reg No.: R24124040

Descriptions

• Plan, execute and supervise all M&E related work services.
• Manage M&E works and services for effective and efficient M&E facilities performance.
• Coordinate and supervise the M&E installation and building maintenance work.
• Working closely with the client, sub-contractors, and the project team to resolve any technical issues. Attend M&E related meetings and involve in the preparation of related reports.
• Involve in the preparation of the method statement, work progress, drawings and other relevant documents related to M&E works.
• Assist in planning, controlling and coordinating of mechanical, electrical and building works.
• Schedule, monitor and supervise the progress of works .
• Prepare and follow- up closely on the client inquiries and quotations.
• Follow the company internal work processes and documentation.
• Involve in conducting toolbox meeting and coordination meeting.
• Coordinate, liaise and communicate with people of all levels
• Build and maintain good client relationships and uphold high quality standards.

Requirements

• Minimum Diploma / Degree in Engineering or Facilities Management related qualifications.
• M&E Facilities operations background with at least 3 years of experience will be an added advantage. Advantage to have Fire Safety Protection Certification.
• Candidates looking for Electrical Engineer position or currently working as M&E / Electrical Engineer (For Facilities Maintenance / Management industry) are welcome to apply.

Tan Choon Hau

Senior Talent Acquisition Consultant

EA Licence No:18C9251

EA Reg ID: R1988835

The EICA Engineer shall be in the discipline of Electrical, Instrumentation & Control in delivery of large scale power generation project. The Engineer shall have at least 5 years of relevant engineering experience in delivery of large scale industrial/ utilities projects (e.g. waste, water, oil & gas or power) or relevant experience in delivering large solid waste management projects (e.g. WTE, sludge incineration, materials recovery and food waste treatment).

The duties shall include the following but not limited to:

• Work as owner’s engineer to lead the electrical team for project implementation at site.
• Proactive attitude and solution orientated personality with leadership mentality and for the EICA discipline, assisting project director for the contract execution.
• Strong capability and experience on 66kV, 10.5kV, 6.6kV and LV related power distribution equipment and cabling installation and commissioning requirement. Experience of large power transformers, generator circuit breakers, MV switchgear, protections and control equipment, MCC and UPS and DC system is expected.
• Having good understanding and interpretation of SLD, protection and metering SLD, schematics and cabling drawings.
• In depth of understanding for electrical power automation for electrification of WtE project.
• Contracts management in managing site works while maintaining swift communication with client and contractors for the WtE project
• Familiar with SS638 requirements on electrical installations in Singapore.
• Having multi-discipline coordination attitude in execution of electrical works
• Basic knowledge of instrumentation and control equipment for site works
• Review the submittals from Contractors for electrical installation and commissioning procedures of various sub-packages.
• Engage in site meetings with technical discussion contractor and client
• Joining site inspection for contractors works.
• Participation of FAT and SAT of electrical equipment
• Ability to use Navisworks to review 3D BIM Model for routing of site utilities

Job Requirements:

• Review of DCS / PLC system configuration, topology and controller, RIO engineering deliverables for the implementation of WTE automation systems
• Review the submittals from Contractors for Process Control like STG package, Incinerator-Boiler System, Water Steam Cycle, weighbridge system, building services, Enterprise Resources Planning, EMIS, PFMS, Communication Network Infrastructure etc.
• Essential understanding of P&ID of process engineering
• Engage in Technical discussion for all control system related issue with contractor and client
• Participate in HAZOP review, SIL safety and design for safety workshops
• Work with electrical team closely for all power and process interfaces
• Participation of FAT of automation equipment DCS, EMIS, PMS, PLC, Weighbridge systems etc
• Provide Technical support in Testing and Commissioning of WTE plant

We are looking for an L1+L2 App Support Engineer to join our dynamic team! You will play a crucial role in ensuring the smooth operation of applications and providing technical support to end users.

• Competitive remuneration package (up to $4,000 + AWS + VB).
• Hybrid working arrangement.
• Be part of a collaborative and supportive team that encourages growth.

Responsibilities:

• Provide assistance to users, addressing inquiries, troubleshooting issues, and quickly implementing solutions to restore systems to full functionality.
• Keep detailed documentation of user interactions, reported problems, solutions applied, and any further actions needed by management or tier 3 support.
• Create user manuals and troubleshooting guides to aid both support teams and users in effectively interacting with the system.
• Work closely with L3 Technical staff and the project manager to set objectives and plan system upgrades and improvements.
• Develop and implement new procedures to boost efficiency, enhance customer satisfaction, and reduce operational costs.

Job Requirements:

• Singaporean only.
• Bilingual in English and Mandarin to handle Mandarin-speaking clients.
• Good writing and communication skills.
• Strong troubleshooting and problem-solving skills with experience in identifying and resolving complex technical issues.
• Experience with ticketing systems (e.g., JIRA, ServiceNow) and version control tools (e.g., Git) is a plus.
• Prior experience in supporting mobile or web applications.

By submitting your resume, you consent to the collection, use, and disclosure of your personal information per ScienTec’s Privacy Policy (scientecconsulting.com/privacy-policy).

This authorizes us to:

• Contact you about potential opportunities.
• Delete personal data not required at this application stage.
• To withdraw consent, email [email protected].
• All applications will be processed with strict confidence. Only shortlisted candidates will be contacted.

Wong Vi Yin (Vanessa) – R24123532
ScienTec Consulting Pte Ltd – 11C5781

Job Description

• Installation, Testing & Commissioning of the following product lines:

- Energy Storage System

- Cloud Services for energy management platform

- LoRaWAN IoT wireless device hardware

• Design, implement and maintain energy storage systems for our clients
• Operate and manage cloud-based solutions for our customers
• Provide technical support and trouble-shooting for energy storage and cloud services
• Work closely with cross-functional teams to identify and implement new technology solutions
• Provide support for marketing activities, including roadshows and customer presentations

Requirements

• Degree in Electrical / Electronic / Computer Engineering or a relevant technical field
• Familiar with IT Cloud Services / Ethernet Network Routing / PowerPoints Creation
• Excellent problem-solving and analytical skills
• Able to work independently and a strong team player
• Fresh graduates are welcomed

Responsibilities:

• Understand and analyse the customer’s needs;
• Find the best solution and lead the architecture definition to meet the customer requirements;
• Interface with the customer, for the technical related aspects of the solution;
• Support the sales and marketing teams by providing internal and external technical pre-sales support for the solutions and services, taking the lead of the architecture aspects in strong cooperation with all the required technical and non-technical skills involved (e.g. hardware, software, security, quality, maintenance);
• Lead the Make/Team/Buy decision process and support the partner & subcontractor choice throughout the capture & delivery activities;
• Be in charge of the executive and technical documentation for tenders and support handover to projects (including but not limited to design documentation);
• Support when needed the teams responsible for the implementation and testing of the solution by providing technical expertise on various aspects of the solution under development, ensuring the design and development goals until the final phases of the bid/project.
• Any other ad hoc duties as assigned by supervisor.

Qualifications:

• Bachelor's degree in Computer Science, Cybersecurity, or a related field.
• Experience with Trellix or SSE product such as Netskope/SkyHigh Security/Versa Networks
• Familiarity with compliance standards (e.g., PCI-DSS, GDPR).

Interested applicants, please email your resume to Andre Chua Jing Ming

Email: [email protected]

CEI Reg No: R1989053

EA Licence No: 99C4599

Recruit Express Pte Ltd

Our client provides advanced instruments and systems designed for high performance across various industries.

• Connect with prospective clients to provide tailored semiconductor solutions.
• Manage the entire sales process, from prospecting to after-sales support.
• Liaise with global teams and R&D to tailor solutions to customer needs.
• Drive growth by exploring industry trends and opportunities in the SEA market.
  Foster and sustain strong client partnerships.

Requirements:

• Degree in Materials Science or equivalent.
• At least 2 years of sales experience in the Metrology/Scientific Industry.
• Good understanding of semiconductor processes for laboratory equipment uses for failure analysis, quality control and metrology equipment for thin film.
• Excellent communication, negotiation, and customer relationship skills.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Your role:

Do you want to design and build attractive digital products and services? Do you want to play a key role in transforming our firm into an agile organization?

At UBS, we re-imagine the way we work, the way we connect with each other – our colleagues, clients and partners – and the way we deliver value. Being agile will make us more responsive, more adaptable, and ultimately more innovative.

We’re looking for a Senior Software Engineer to:

• Design, develop, and improve the API Management Platform we provide to our clients and employees
• Apply a broad range of software engineering practices, from analyzing user needs and developing new features to automated testing and deployment
• Ensure the quality, security, reliability, and compliance of our solutions by applying our digital principles and implementing both functional and non-functional requirements
• Build observability into our solutions, monitor production health, help to resolve incidents, and remediate the root cause of risks and issues
• Be part of our agile Scrum team, using development best practices and contribute to the vision and direction of our software products
• Understand, represent, and advocate for client needs
• Share knowledge and expertise with colleagues, help with hiring, and contribute regularly to our engineering culture and internal communities

Your team:

In our agile operating model, crews are aligned to larger products and services fulfilling client needs and encompass multiple autonomous pods. You’ll be working in the API Banking & Client reporting stream in the API Infrastructure management team in Singapore focusing on build and deliver a robust and reliable Apigee infrastructure to our internal customers.

We are a very dynamic and diverse team, full of technology talents that are passionate about bringing excellent software to production to fulfil stakeholders’ needs. You will be working in a dynamic, client-facing environment where your contributions will play a pivotal role in reshaping industry standards.

Your expertise:

• Experience in software engineering and knowledge of methodologies and practices
• Understanding of complex distributed solutions
• API Gateway skills: Google Apigee
• Network protocols: TCP/IP, HTTP, TLS
• Message protocols: REST, SOAP, XML, JSON
• Programming Languages: Java, Javascript
• OpenAPI Specs, Git, Gitlab, Maven, Linux, Shell
• Ansible and SPLUNK knowhow are a plus
• Interested in learning new technologies and practices, reuse strategic platforms and standards, evaluate options, and make decisions with long-term sustainability in mind
• Fluent in English and German

Your role:

Are you an enthusiastic technology professional? Are you excited about seeking an enriching career; working for one of finest financial institutions in world? If so, you are the right person for this role. We’re seeking technology and domain leaders to join our development team within WMPC IT (Wealth Management Personal Corporate).

We are looking for someone who can:

• Implement and deliver high quality software solutions / components for the Credit Services platform that conform to architectural standards
• Manage and 'own' significant development tasks end-to-end
• Demonstrate superior collaboration skills in working closely with other development, testing and implementation teams to roll-out important regulatory and business improvement programs
• The role will be based in Singapore

Your team:

You will be part of the CDIO WMPC Development team responsible for

• Deliver solutions needed and L3 support to CA's and Credit Risk Control (CRC) personnel to monitor Credit Risk exposure of its global Front Office functions
• Providing the systems that ensure Bank's compliance to various regulatory requirements

Your expertise:

• Minimally 7 years of experience in enterprise application and system design with OOA/OOD, UML Modeling
• Ideally 5 years of hands-on experience in Java 11 or above, Spring boot with following modules (not limited to): Spring Web-MVC, Spring Data JPA/Rest, Spring Batch, Spring Cloud Stream (Kafka)
• Possess good understanding of Cloud Native microservice architecture, database concept, Kafka messaging system, Cloud Fundamentals and Gitlab
• Good knowledge of Azure Fundamentals, DevOps, ReactJS and Restful Webservices is preferred

Assurity Trusted Solutions (ATS) is a wholly owned subsidiary of the Government Technology Agency (GovTech). As a Trusted Partner over the last decade, ATS offers a comprehensive suite of products and services ranging from infrastructure and operational services, authentication services, governance and assurance services as well as managed processes. In a dynamic digital and cyber landscape, where trust & collaboration are key, ATS continues to drive mutually beneficial business outcomes through collaboration with GovTech, government agencies and commercial partners to mitigate cyber risks and bolster security postures.

We are looking for a Cybersecurity Engineer (Cloud Infrastructure and Log Management) to join us. The employment contract will end on 31 March 2026.

You will be working on:

• Responsible to develop, setup and maintain large scale log ingestion cloud infrastructure.
• Responsible to handle the log ingestion workflow from Subscriber till backend SOC.
• Develop automation for end-to-end log ingestion processes to facilitate scalable ingestion infrastructure and provide better Subscriber experience.
• Develop and maintain custom log parsers.
• Monitor and respond to incidents for the cloud infrastructure and log ingestion system.
• Provide consultancy to Subscribers and their contractors on their log ingestion matters.
• Assist Subscribers on-site to setup and troubleshoot their log management system, ensuring their log are successfully being forwarded to the SOC.
• Engage stakeholders and enhance operations to improve on the log ingestion workflow/pipeline.

To succeed in this role, you will ideally have:

• Minimum 3 years of working experience in Cybersecurity.
• Minimum 3 years of working experience in one or more of AWS, Azure or Google Cloud Platform, doing Cloud Infrastructure or Cloud DevOps.
• Experience with IAC deployments and it’s best practices.
• Knowledge of SIEM or log parsers will be an added advantage.
• Good to have knowledge on Node.js, Python or other scripting languages
• Good to have knowledge and experience on GitOps
• Possess good communication skills and interpersonal skills.
• Passion for improving operations to ensure the system are secure and resilient.
• Self-motivated, driven, and possesses a strong aptitude for continuous learning.
• Good team-player who is willing to help the team to succeed in the achieving the objectives.

Join us and discover a meaningful and exciting career with Assurity Trusted Solutions!

The remuneration package will commensurate with your qualifications and experience. Interested applicants, please click "Apply Now".

We thank you for your interest and please note that only shortlisted candidates will be notified.

By submitting your application, you agree that your personal data may be collected, used and disclosed by Assurity Trusted Solutions Pte. Ltd. (ATS), GovTech and their service providers and agents in accordance with ATS’s privacy statement which can be found at: https://www.assurity.sg/privacy.html or such other successor site.

Context:

• Participate in product development of data quality monitoring and management. The product implements quality control and monitors trade messages between various systems with custom routing rules and message transformation with extensive use of message queues and middleware technologies.
• The Software Engineer should be an experienced cloud practitioner and have the mindset to keep improving the software development process and use DevOps tools with a focus on security, quality & performance.

Job Description:

• Study, evaluate, understand, and provide feedback on functional specifications
• Develop solutions following defined standards and high-quality
• Provide detailed estimation for the development of solutions
• Implement solutions using TDD
• Implement BDD for the features
• Perform non-functional testing
• Perform design and code review for other team members
• Prepare documentation for design and implementation
• Enable and support functional and user acceptance testing
• Support applications in production - analyze and resolve issues as they arise
• Work with various technical/functional teams to ensure proper delivery
• Maintain lessons learned, release post-mortem outcomes, and convert them into best practices
• Automation approach or suggest automation as and when applicable
• Be at the forefront of communications and have a good relationship with any stakeholder involved

Job Requirements:

• At least Bachelor’s Degree in Computer Science, Information Technology, Programming & Systems Analysis, Science (Computer Studies) or related fields
• Minimum 6 years in Java/J2EE development

Must Have Technical Skills and Experience

• Solution design using proven patterns, awareness of anti-patterns, performance tuning
• Java/J2EE, Spring, Angular JS, Spring MVC/Struts, Multi-threading, Restful web services, Swagger, JMS/WebSphere MQ, Javascript, JQuery, XML, XSLT, XPath, XSD
• Docker/Kubernete, Kafka, Spark, Mongo DB
• A strong understanding of recent Java language features, such as lambdas, streams, and futures
• Relational databases – MSSQL, Oracle, PostgreSQL
• Source management – SVN/GIT, TDD using Junit, DBUnit, Jira / QC
• Application server – Jboss / WildFly / Websphere
• Well experienced and have a good understanding of SQL language,
• Well experienced and have a good understanding of Unix/Linux Shell Scripting,
• Experience with JIRA, Confluence, Maven, GitLab, Jenkins, SonarQube, and other deployment tools.
• Having exposure to DevOps and DevOps tools.
• Knowledge on implementing solutions on the Cloud, preferably AWS

Nice to Have

• Experience in Business intelligence tools
• Experience in working with application monitoring and automation
• Experience in the Banking environment, especially in Capital Market IT

• Progressing all elements of design in-line with the Design Checklist;
• Prepare electrical tender packages including specification and drawings;
• Responsible for ensuring to remain familiar with current practices and engineering trends within the industry and to remain technically competent;
• Tendering and estimating of electrical works for projects prior to award;
• Compilation and Review of Operation and Maintenance Dossier for Projects.

Elsa Fontanne (CEI No. R24124496)

Recruitment Consultant

Contact Number: 67860100

Email Address: [email protected]

Recruit Express Pte Ltd / EA Licence No: 99C4599

We regret only shortlisted candidates will be contacted