• Ensure that good safety and high quality of work are being carried out by the Contractor in compliance with the statutory requirements
• To provide wherever and whenever necessary standing supervision for the construction of civil and structural works in accordance with the Project specifications, construction drawings, and Building Control Act and Regulations.
• To assist SRE in the management and control of a team of site staff or Resident Technical Officer(s)
• To assist SRE in administrative control of the site staff, instill and maintain discipline, punctuality, and keep daily records of staff attendance, and other matters concerning the site staff's administrative matters.
• To oversee all aspects relating to the construction of the Project, keeping and submitting records.
• To provide full support and assistance, as and when directed by the SRE or client
• To check and assess temporary works by the Contractor to ensure that the works are safe and in compliance with all relevant Regulations.
• To ensure that Contractor’s working procedure complies with the agreed method statement and relevant workplace safety and health regulations and to direct modification to the procedure, if necessary, to comply with the agreed method and safety and health regulations.
• Any other Adhoc tasks are given by management

Requirements:

• Min 8 years of civil engineering experience
• 3 years of experience in major construction works likes deep excavation, drainage, pipe jacking, ground improvement, supervision & installation of monitoring instruments and collating of monitoring data.
• Degree in Civil Engineering recognized by PEB
• Accredited as a RE with IES
• Able to perform shift work.

Job description

Nanomatics, a cutting-edge startup revolutionizing plastic waste management, is seeking a Research Engineer with background in manufacturing and engineering. The candidate will lead research and development activities at Company’s manufacturing research facility (demonstration plant) for plastic waste upcycling.

Responsibilities

1. Contribute to research and development work at a manufacturing research facility (demonstration plant) through experiments including:

- Plastic waste conversion into various products.

- Analysis of energy and material balances.

- Evaluation of process performance.

- Implementation of modifications and improvements to original design.

- Documenting activities and data obtained.

- Development of improved processes for material handling, treatment and storage.

2. Ensure adherence of operations to all regulatory and statutory requirements, especially, workplace health and safety practices. Liaise with safety officer and operation teams to prepare and maintain up to date relevant work permits, risk assessments, safe work procedures and method statements.

3. Organize, monitor and ensure that manufacturing research facility is operated with maximum efficiency at minimum cost.

4. Perform routine checks and process control to ensure smooth operation and keep relevant records of these activities.

5. Maintain and improve housekeeping. Ensure that waste, chemicals, product handling equipment and assigned areas are kept clean.

6. Assist with other tasks as directed by a supervisor and company management.

Requirements:

1. Degree or Diploma in Chemical Engineering, Mechanical Engineering, Manufacturing or related field of study. Fresh graduates will be considered, although work experience in manufacturing will be beneficial.

2. Hands-on experience including: metal design and fabrication, using hand tools (non-powered and powered), minor repairs and maintenance of equipment, day-to-day troubleshooting of machinery/equipment.

3. Strong verbal and written communication skills in English to communicate with other team members and workers.

4. Software knowledge: MS Office, Google Docs, Autodesk (Fusion).

6. Fit to wear dust mask/gas respirator.

7. Prepared to work in Tuas area (near Tuas Crescent MRT).

8. Resilient to noise, dust and heat at the manufacturing site.

Job Title: Architectural Engineer

Occupation: Architectural Engineer

Duties and Responsibility:

→LTA A&A Experience (Must)

→Minimum 5 years relevant experience in supervision of architectural works in building construction

→Handle technical and engineering problems

→Plan and execute work schedule based on contract schedule

→Coordinate and control construction works on site

→Evaluate subcontractors’ risk assessment, safe work procedures and method statements

→Review subcontractors/supplier performance after completion works

→Well-versed in Construction Method Statements

→Manage Piling, Excavation, ERSS, RC, and Architecture work

→Preparing the site and liaising with other construction professionals before construction work starts

→Developing the program of work and strategy for making the project happen

→Planning ahead to prevent problems on site before they occur, planning the delivery and storage of equipment and materials

→Making safety inspections of the site when work is underway and ensuring regulations relating to health, safety, and the environment are adhered to

→Ensure progress of work is within budget & timelines as well as quality & safety objectives

→Well-versed in construction sequence, principles and LTA regulatory requirements

→Good leadership skills

→Good communication and interpersonal skills

→Great team player

Job Description:

• Responsible for the planning, execution and monitoring of ACMV projects according to schedule
• Manage a team of supervisors, workers and sub-contractors to ensure proper execution of works
• Fulfil required site administration
• Attend site meetings
• Carry out necessary actions to ensure smooth progression of site works
• Ensure timely submission of shop drawings, materials and as-built drawings
• Handover of site to client

Job Requirements:

• Possess the necessary knowledge in ACMV to carry out the works dutifully
• At least 2 years’ experience in ACMV or relevant field
• Able to read ACMV drawings
• Able to work in a team or independently
• Able to take initiative

Job Summary:
We are seeking a highly experienced DevOps Engineer to design, implement, and maintain OpenShift platforms across Baremetal, Virtualized, and Public Cloud environments. The ideal candidate will have extensive expertise in Kubernetes, containerization technologies, and modernizing legacy applications using microservices architectures. This role involves leading technical initiatives, collaborating with DevOps teams, and mentoring team members.

Key Responsibilities:

• Platform Management:
  Design, implement, and maintain robust OpenShift platforms on Baremetal, Virtualized, and Public Cloud platforms, ensuring alignment with business goals and industry standards.
• Application Modernization:
  Lead the transformation of legacy applications into microservices architectures using OpenShift for improved scalability, reliability, and efficiency.
• CI/CD & Automation:
  Collaborate with DevOps teams to refine CI/CD pipelines, automation practices, and infrastructure-as-code methodologies using tools like GitOps.
• Deployment & Scaling:
  Ensure seamless deployment, scaling, and management of containerized applications.
• Mentorship & Best Practices:
  Mentor team members by sharing technical expertise, promoting best practices, and fostering a collaborative environment.

Essential Qualifications:

• Experience:
  7-8 years of hands-on experience in OpenShift architecture, Kubernetes, and containerization technologies.
  Proven experience modernizing legacy applications into microservices architectures.
  Experience working within the financial services industry and adhering to industry-specific regulations.
• Technical Skills:
  Expertise in OpenShift components and features, including ACM, ACS, Quay, and ODF.
  Proficiency with DevOps tools such as Git, Jenkins, Ansible, and Terraform.
  Experience with GitOps workflows and infrastructure management tools.
• Soft Skills:
  Strong problem-solving, analytical, and communication skills.
  Ability to work independently and collaborate effectively within a team.

Desirable Qualifications:

• Certifications:
  OpenShift or Kubernetes certification.
• Additional Tools:
  Familiarity with Istio or other service mesh technologies.

[Job ID: 625106]

Overview
Join a prominent global leader in cutting-edge semiconductor manufacturing equipment as they're looking for a Sales Engineer to join their team. The company is involved in the development, production, and sales across various product sectors.

Responsibilities

• Create tailored marketing plans and activities to strengthen product placement in the competitive market.
• Develop business strategies and establish product positioning to maximize market impact.
• Oversee market research, monitor competitors, and identify customer needs.
• Set pricing strategies and collaborate with engineering, manufacturing, and sales to improve or develop new products.
• Prepare pricing quotes, negotiate final prices, and submit documentation to finalize orders.
• Follow up on accounts receivable and maintain communication with customers regarding product roadmaps and technology needs.

Requirements

• Minimum of 2 years of experience as a Sales Engineer in the semiconductor industry.
• Open to travel and dedicate extra hours to manage complex sales projects.
• Excellent communication and interpersonal skills.
• Detail-oriented, organized, and a resourceful team player.
• Self-motivated and able to work independently with minimal supervision.

We regret that only shortlisted candidates will be notified. However, rest assured that all applications will be updated to our resume bank for future opportunities.

Please kindly refer to the Privacy Policy of Good Job Creations for your reference: https://goodjobcreations.com.sg/en/privacy-policy/

EA Personnel Name: Chay Yoke Ting Vanessa (Xie Ruoting)
EA Personnel Registration Number: R23115805
EA License No.: 07C5771

Key Responsibilities:

• Overseeing projects at one or multiple stipulated sites.
• Assist project manager is the execution of the projects.
• Responsibilites for co-ordination with Consultants, Architects and relevant authorities.
• Liaise with Consultants, Main contractor, Suppliers, Sub contractor on Equipment & Material submissions.
• Monitor and ensure progress of works are carried out according to project specification.
• Design schematic drawing, layout drawing, P&ID drawing.
• Review and check drawing before submit to main contractor.
• Oversee the overall planning of ACMV works, site inspection, variation order and certification of work done for all assigned projects.
• Support project manager in the administration of contract, claim, variation and any dispute arise.
• Raise MR and order material & arrange manpower for necessary works.
• Advise site team for work schedule and technical issues.
• Make sure project is carried out according to schedule.
• Responsible for site supervision and implementation.
• Responsible for ensuring implementing safety measures.

Requirements:
- Minimum diploma
- 3 years or above experiences in ACMV, especially in air-conditioning industry
- Able to use AutoCAD or other related software for ACMV Design
- Able to communicate Fluent in English
- Minimum 3 years in ACMV Sector

To apply, It will be great if you could share your CV to [email protected]. Alternatively, you can apply at https://lnkd.in/gcwKsApK

• Lead digital transformation through AI
• Engagement with senior business stakeholders

About the company

Our Client is one of the most established companies within their industry. They have a well-established presence of more than 15 years with a global footprint of more than 5 countries. With aggressive plan in investing in IT, they are now looking hire their AI Engineer to be based here in Singapore.

About the job

Your role involves:

• Collaborate with cross-functional teams to identify problems and deliver AI-powered solutions.
• Work with large datasets, preprocess data, and select appropriate algorithms for training.
• Continuously improve models by iterating, fine-tuning, and implementing state-of-the-art techniques.
• Contribute to the design and architecture of AI platforms and pipelines.
• Research and integrate new AI methodologies, tools, and frameworks to stay ahead in the field.
• Implement and test models, ensuring high quality and performance.
• Communicate complex AI concepts and results to non-technical stakeholders.
• Engaging with business stakeholders, translate business and technical requirements into data transformation jobs and design data models that powers data lake solutions to support AI/ML initiatives.

Skills and experience required

As a successful applicant, you will have at least 2 years of experience in AI/Machine learning. Exposure to regression models / decision tree regression and Gen A will be of added advantage.

Whats on offer

This is an excellent opportunity to led AI transformation with a leading company.

To apply, It will be great if you could share your CV to [email protected]. Alternatively, you can apply at https://lnkd.in/gcwKsApK (EA: 94C3609/ R1219669)

As a NAND CMOS Device Engineer, you will help set the direction for current and future CMOS technology for Micron’s NAND Memory Technology Roadmap!

You will work with the Design Team to set electrical targets and define transistor structures to meet these targets. You will guide the device technology development and be in close relation with Process Integration, Design Engineering, Design, Design Rules, Reliability, Transistor Modeling, TCAD (Technology Computer-Aided Design), and Parametric Test, to name a few! In addition, you will ensure that the developed technology is manufacturable and highly yielding and that these considerations are designed into the technology from the start.

Together with your peers, you craft and implement our NAND-CMOS roadmap and make sure to align to product roadmaps

• You give directions on how to improve our device portfolio, both in performance and cost effectiveness
• You define, execute, and analyze silicon experiments for future device generations
• Interface with Design Engineers to define transistor targets, deliver transistor models, and optimize critical layout constrained Design Rules
• Work with TCAD simulation group to develop strategies for transistor structures to meet targets
• You strive to ensure that transistor models are correctly targeted to anticipate final silicon
• Define electrical test structures for transistors, isolation, design rule verification, and process monitoring
• Highly motivated to ensure transistors are developed meeting the required reliability standards
• You take initiative to collaborate with Manufacturing to ensure transistors are performing as expected and to debug yield/reliability issues
• You foster and enable a collaborative working style and team spirit by mentoring less experienced colleagues

Minimum Qualifications:

• MS/PhD in Electrical Engineering or related field, PhD in Semiconductor Device Technology preferred
• 5 plus years industry experience in the field of CMOS device design, simulation, characterization
• Experience in developing advanced logic transistor technologies
• Experience in developing Analog FETs operating at higher Voltages
• Preferred: Experience in the field of High Voltage applications, reliability, characterization, device development
• Understanding of analog design concepts
• Good presentation skills
• Excellent team and mentoring skills

Develops new or modified process formulations, defines processing or handling equipment requirements and specifications, and reviews processing techniques and methods applied in the manufacture, fabrication, and evaluation of products. Involvement may begin at any step from pilot plant to full-scale manufacturing. Coordinates design requirement review with appropriate engineering/scientific personnel to ensure compatibility of processing methods. Compiles and evaluates test data to determine appropriate limits and variables for process or material specifications. May conceive and plan projects involving definition and selection of new concepts, equipment automation technology, and approaches in the processing or development of new or improved processes.

• Permanent role
• Fast-growing organisation in the tech security industry

About Our Client

We are partnering with a fast growing start-up organisation in the tech security industry, headquartered in US.

Job Description

• To support the full software development lifecycle for new and existing mobile applications, SDKs and RESTful services
• Able to build reusable Android software components and develop mobile frameworks based on best practices
• To be involved in the design, development, testing and distribution of our mobile SDKs for Android
• Keeping up with the latest mobile technologies, devices, tools and conventions

The Successful Applicant

• Has at least 5 years of working experience in mobile development
• Strong experience with Java and Kotlin languages and developing in Android SDKs
• Has experience building maintainable and testable code bases, including API design, unit testing and UI testing techniques
• Familiar with Android development tools such as Xcode, CocoaPods, Android Studio, Gradle, Fastlane

What's on Offer

• Permanent role
• Fast-growing organisation in the tech security industry
• Variety of exposure to different projects, even working globally as well

Contact

Cheryl Ang (Lic No: R2091316/ EA no: 18C9065)

Quote job ref

JN-072024-6491862

Phone number

+65 6416 9884

Page Personnel Recruitment Pte. Ltd.| Registration No. 201736642C

• Proficiency in Scala programming and functional programming principles.
  • Strong SQL skills, including query optimization and database design.
  • Hands-on experience with Hadoop ecosystem tools (HDFS, Hive, YARN, MapReduce).
  • Familiarity with other big data tools like Spark, Kafka, or Flink is a plus.
• Problem-Solving:
  • Strong analytical skills with the ability to troubleshoot and resolve complex data issues.
• Communication:
  • Excellent communication skills to effectively collaborate with technical and non-technical stakeholders.
• Experience:
  • 6+ years of experience in data engineering, big data technologies, or a similar role.

Company’s Profile

Julian Grey’s client envisions global connectivity and innovation, striving to be among the best with a global outlook and cutting-edge technology.

Responsibilities

• Project deployment in Telecommunication Data Centre landscapes at various locations
• Executing installation, commissioning, and testing of transmission/DWDM systems
• Managing and resolving issues with telco equipment, including RMA processes
• Conducting software and firmware updates on systems

Requirements

• Fiber Optics Transmission Systems and Data Networking
• Test equipment and Systems Integration
• Experience with Visio, Linux Red Hat
• Familiarity with Ciena 6500 equipment is beneficial

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Please WA Jian Wei @ 87389860
Shortlisted candidates will be notified

Quek Jian Wei
Reg No. R22110928
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

Company’s Profile
Julian Grey’s client is a solution provider for security and enterprise applications.

Responsibilities:

• Manage network, OS, storage, and backup tasks.
• Collaborate on system development, covering design, implementation, integration, and testing.
• Provide 24x7 support, implementing quick resolutions to minimize unplanned outages.
• Maintain detailed programmatic and technical documentation.
• Engage with external stakeholders and clients to ensure efficient resolution.

Requirements

• Degree in Computer Science, Computer Engineering, or Information Technology.

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Please WA Jian Wei @ 87389860
Shortlisted candidates will be notified

Quek Jian Wei
Reg No. R22110928
Julian Grey Corporate Advisory Pte. Ltd.

EA License No: 19C9568

• Perform design for manufacturability in all new projects.
• Provide PCB manufacturing technical advice to customers on their new projects.
• Perform feasibility studies and reviews for all new data received from customers.
• Adhoc duties as assigned.

Requirements:

• Degree/Diploma in Electrical & Electronics Engineering in Printed Wiring Board manufacturing environment
• Good communication, report writing and presentation skills
• Good analytical skill with ability to work independently
• Ability to communicate with all levels of staffs
• Entry level are welcome to apply as training will be provided.

Electronics MFG Industry

Loyang Area (Tpt pick up at designated area)

Interested applicants, please forward a detailed resume to [email protected]

Tempserv Pte Ltd
License No: 06C3745
Attention: Audris Teo / EA Personnel No: R1102063

Responsibilities:

• Assist in the design, operation, control and optimization of chemical / biological processes systems used in manufacture of API and biologic products.
• To be part of the commissioning and qualification effort of the process equipment and associated systems.
• Assist in Design, install and commission new production units, monitoring modifications and upgrades and troubleshooting existing processes
• Participate in improvement efforts leading to higher process capability and production volume while maintaining and improving quality standards
• In a cGMP environment, lead modifications and changes to processes and equipment, troubleshooting, deviation investigation, identification and completion of corrective and preventative actions.
• Assist Senior Engineer in proposal and evaluation modifications to equipment, processes and operations to improve safety, increase efficiency and enhance company goals.
• Maintain reliable and safe manufacturing systems while improving production rates, efficiencies, yields, costs and changeovers
• Actively engaged in developing specifications for process equipment and assist in FAT / SAT of related equipment as part of the new build-outs.
• Participate and lead, when required, in all investigations (contaminations, deviations, and discrepancies) relating to the manufacturing process.
• Provide operational support for the successful and uninterrupted operation of manufacturing.
• Other duties as assigned by manager

Requirements:

• Diploma/Degree in Science, Mechanical/Chemical Engineering or a relevant discipline. At least 1-2 years related Pharmaceutical experience preferred. Fresh graduates or with pharmaceutical internship are also welcome to apply.
• Good interpersonal and communication skills.
• Ability to multitask and hands-on approach
• Reliability, responsibility, and personal integrity
• Self-motivated and willingness to learn
• Creative Thinking

• Responsible for Company Wide Quality Assurance activities and serve as an effective link in the translation of customers’ requirement and our capabilities towards satisfying or exceeding customers’ requirements.
• Manage Incoming Quality Operation:

1. Testing, auditing & new sample verification activities.
2. Establish test plan and test procedure & ensure staff compliance accordingly.

Requirements:

• Degree in any Engineering discipline (Preferable in Quality Engineering)
• 2 – 3years’ of experience in Quality Assurance activities / operational
• Good communication, report writing and presentation skills
• Good analytical skill with ability to work effectively
• Good organizational, independent and leadership skills
• Decisive and good in problem solving
• Proficient in Microsoft Office

5 days work week

Electronics MFG Ind.

Loyang Area (Tpt pick up at designated MRT station)

Interested Applicants, kindly email your detailed resume to [email protected]

Tempserv Pte Ltd

License No: 06C3745

Attention: Audris Teo / EA Personnel No: R1102063

Fabrica AI Full time Electrical Engineer - Invention of Automatic Tile Grouting Robots

Fabrica AI is reinventing how robots are developed. Currently novel robots take 5-20 years. We are building a design automation platform to bring it down to a month, and have already demonstrated significant progress by developing tile grouting robots in record time. Robotics simulation and reinforcement learning has been advancing a lot making it 1000x cheaper to train robots compared to 5 years ago, and as Jensen Huang said at Nvidia GTC 2024, "the ChatGPT moment for robotics may be just around the corner." A couple other companies are building on the same paradigm shift but we are the only ones using it to automate hardware design, not just software.

Building robots and a design automation platform together brings great synergy - the platform helps us develop robots faster than anyone else and the robots allow us to gather data and do experiments at scale. Data gathering can be done through partnerships with other robotics companies, but doing experiments is crucial for grounding the platform in reality and ensuring its usefulness. The grouting robots are already deploying daily at construction sites and bringing value to clients. We are currently negotiating sales worth around 500k USD. With manufacturing cost multiple times lower than companies using a traditional robotic arm, our robots have an ROI in weeks. Our robot is also small and simple to use, operating from a single button without the need to upload floorplans or do any complex setup. Soon we would be expanding into other simple and valuable robots for the construction industry.

We’ve raised over 2.5m USD from Hoxton Ventures, Credo Ventures, our Professor from Cambridge University, Woh Hup, and the owner of BHCC (listed construction company). We’ve 2500sqft of space in Singapore where we have over 20 team members, and 1200sqft of space in Czechia where we have our software team.

Jakub Suchanek (CEO) has an engineering degree from the University of Cambridge and experience working on self-driving cars at Wayve and machine learning at Granta Innovation and Wacker. He is a worldwide winner of NASA SpaceApps and has won bronze medals in International Olympiads in Informatics and Physics.

Ronald Luc (CTO) earned a degree in Math and Computer Science from Masaryk University, where he was a teaching assistant, and supervised several deep learning theses. He has years of industry experience in both machine learning and self driving cars. With Jakub he won TechFest Munich, one of the EU’s top hackathons; and represented Czechia at the International Olympiad in Informatics.

Keefe Wayne Teo (COO & CFO), a University of Cambridge engineering graduate, served as president of Hackbridge.io, promoting entrepreneurship in tech. He has 100+ citations in research journals and four papers on sustainable energy. He previously worked at Entrepreneur First and has business development experience from other companies.

Website: https://www.fabrica.ai/ (and various press releases, awards, etc.)
Latest Grouting Robot Demo: https://www.youtube.com/watch?v=AVWjmaMuYM0

Fabricator videos

https://www.youtube.com/watch?v=4aoQ4QaEOPQ

https://www.youtube.com/watch?v=xnENP7zWzEM

https://youtu.be/qXpkFeEidac

https://www.youtube.com/watch?v=5SBiEBLMQ9k

Your role would revolve around real-world industry deployments taking us from a TRL of 7 to 9. You may be remunerated with a combination of salary and share options. The following tracks are available:

Core responsibilities:

• PCB, electronics design
  • Working with both hobbyist and industrial microcontrollers, single board computers, motor drivers etc.
  • Integrating motor systems of different types (DC, BLDC, with encoder feedback…), sensor modules etc.
  • PCB design
• Embedded programming

Possible additional responsibilities:

• Testing our robot on construction sites
• Managing external PCB production
• Harness design
• Overseeing a team doing all the above

Requirements:

• Experience with electronics design and embedded software at at least one industrial level project
• Value the direct impact on the product and proximity to clients at a startup and the growth potential of a startup more than having a stable job at a reputable company
• Willing to work without a very well defined job scope and willing to adapt to changes week on week
• Ability to think of metrics to measure progress and deciding based on back on the envelope calculations
• Keenness to do more than is expected, impact driven, past side projects
• Excited about robotics and similar technical areas and exploring them in work and other projects
• Growth mindset driven

Our development process is very iterative and agile. Thus your role/tasks is/are likely to evolve over time. You would play a significant part in deciding how your work would contribute to our overall goals. If you like this process, you’d be a good fit for us.

Check out the link above for more information, and send your CV to [email protected]

The incumbent will be responsible for identifying critical gaps, in the supplier process control, drive development of appropriate containment and closure with robust solutions at supplier sites. To develop solutions to verify implemented process controls, engage product engineering for clarification of specifications, partner with SDE to develop appropriate metrics, validate compliance to specifications etc.

Requirements:

• Detailed knowledge of Geometric Dimensioning & Tolerancing (GD&T), at least 1 year of related experience
• Knowledge of part dimension verification tools & techniques, and working experience with data visualization (MS Power BI, Tableau), data manipulation (SQL)

Interested candidates, please forward your most recent resume to [email protected]

Job Description

• Industry/ Organization Type: Manufacturing/Semiconductor Technology
• Position Title: Product Engineer (Vision Inspection Systems)
• Working Location: East Area (Nearest MRT: Bendemeer)
• Working Hours: 5 days Monday – Friday, 9 am – 6 pm
• Salary Package: Up to $5,000 + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Assist in component selection, engineering evaluations, and testing of parts and sub-modules for vision inspection equipment.
• Design electrical parts and sub-modules for vision inspection systems.
• Maintain product design documents, including drawings and BOM (Bill of Materials).
• Work closely with and manage suppliers to ensure all design requirements are met.
• Provide troubleshooting expertise for design and system issues.
• Plan and coordinate the release of new designs to manufacturing.

APPLY NOW!!!

• Min. Diploma in Electrical or Electronic Engineering.
• Familiarity with CAD software for electrical layout and schematic design.
• Experience working with PC hardware, Windows OS, and relevant software.
• Knowledge of PCB/PCBA design, fabrication, and testing processes is a plus.

Please apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #69795 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Markus Tan | EA Reg No.: R24124040

Key Responsibilities:

• Assist in evaluating manufacturing processes by supporting research programs, applying knowledge of product design and materials, and collaborating with operators and vendors.
• Help design and develop manufacturing processes for new products and enhancements, including related tooling and fixtures.
• Support process troubleshooting and refinements to improve product throughput and assembly techniques.
• Contribute to improving manufacturing efficiency by analyzing workflow, space requirements, and equipment layout.
• Participate in process qualifications and validations, including equipment qualifications and material specifications.
• Assist in ensuring product and process quality by supporting the design of testing methods and confirming manufacturing processes.
• Provide manufacturing decision-making information by assisting in calculations of production, labor, and material costs, and reviewing production schedules.
• Help prepare product and process reports by collecting, analyzing, and summarizing information and trends.
• Assist in keeping equipment operational by coordinating maintenance and repair services, following manufacturer’s instructions and procedures.
• Support Health & Safety initiatives in assigned areas, including accident investigation and corrective actions.
• Research state-of-the-art process technologies and evaluate their potential benefits.
• Participate in Validation Activities as directed.
• Assist in maintaining compliance with ISO 13485, GMP, and FDA regulations.

Education/Experience and Qualifications:

• Bachelor’s degree in Engineering or a similar technical field.
• Up to 2 years of experience in a high-volume production environment; experience in medical device manufacturing, particularly catheter production, is a plus.
• Strong interpersonal skills with the ability to communicate effectively at all levels within the company.
• Basic understanding of DOE and statistical techniques.
• Familiarity with process capabilities and control charting is preferred.
• Exposure to writing protocols for validations and qualifications, including FMEA and IQ/OQ documentation.
• Awareness of GMPs, ISO 9001, ISO 13485, and Medical Device Directives.
• Self-motivated and eager to drive change and innovation. Must be comfortable working in a fast-paced environment with minimal supervision.

Job Description

• Industry/ Organization Type: Engineering Service Provider
• Position Title: Project Engineer (Oil & Gas / Petroleum / Chemical)
• Working Location: West – Bukit Batok
• Working Hours: 5 days (Mon-Fri: 8.30 am - 5.30 pm)
• Salary Package: Up to SGD 5000 + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Acting as the principal technical liaison among the project team, customers, subcontractors, and the company.
• Reviewing project specifications and related documents.
• Ensuring the implementation of good engineering standards and practices.
• Focusing on understanding and solving customer technical problems to improve satisfaction.
• Maximizing project profitability through appropriate material buyout and engineering approaches.
• Developing and completing major engineering deliverables according to the Vendor Document Schedule.
• Managing design, analysis, and drafting to meet technical and schedule requirements.
• Handling quality control, including maintenance of non-conformance reports (NCRs) and specification waivers.
• Coordinating with the Document Controller to ensure adherence to technical and document control processes.
• Interfacing with the Project Manager for engineering deliverables and resources.
• Preparing material requisition specifications and conducting goods receipt inspections.
• Supervising fabrication/installation work and assisting with internal testing and FAT.
• Preparing final and As-built documentation, as well as Operation & Maintenance Manuals and Manufacturer Data Records.
• Promoting and developing solution capabilities and application knowledge to support current and future projects.

APPLY NOW!!!

• Min. Diploma in Instrument/Electrical/Chemical Engineering or equivalent
• Min. 2 years of relevant working experience in a similar industry
• Knowledge of Oil & Gas, Petroleum, or Chemical Industries would be preferred
• Familiar with Microsoft Office with knowledge of AutoCAD will be an added advantage

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #68467 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

• Performing machine/equipment calibration and maintenance.
• Liaising with machine suppliers on maintenance and servicing.
• Production process & productivity improvement based on process analysis finding.

Requirements:

• Bachelor in Mechatronics/Electronics/Avionics Engineering or its equivalent.
• Prefer 2 years of relevant working experience.
• Entry level with good attitude are welcome to apply as training will be provided.

5 days work week
East Area
Electronics Manufacturing Industry

Interested Applicants, kindly email your detailed resume to [email protected]

Tempserv Pte Ltd

License No: 06C3745

Attention: Audris Teo / EA Personnel No: R1102063

We are seeking a System Engineer for our client ST Engineering.

Responsibilities

· System Engineering Design

· Generating Test Plan & Procedures

· Sourcing and Procurement of System Hardware

· Planning and Setting up Test Lab

· Conduct Factory Acceptance Test

· Lead Installation, Checkout, Integration and Testing (ICIT) at customer’s sites

· Perform Troubleshooting and Resolving System Faults

· Perform On-Site Acceptance Test

· Lead project activities and coordinate with multiple stakeholders which includes suppliers, customers and other teams of staff for the project implementation

Requirements

· Degree in Electrical & Electronics Engineering / Computer Science or equivalent

· Minimum 2 to 3 years working experience in industry

· Experience and knowledge in Infocomm Technology, RedHat Linux, Virtual Environment, Network Security is preferred

· Computer literate e.g. MS office, Visio

· Excellent Oral and Written Communication Skills

· Excellent Time-management

· Good Learning Capability

· Working location is in Jurong East

· Singaporeans Only

Please click apply, or submit resumes to [email protected] with the following details in MS Word format:

- Position applying for

- Current remuneration

- Expected remuneration

- Notice period

Goh Kwan Way Marc

EA License No : 06C4642

EA Reg No : R24120754

We regret that only shortlisted candidates will be notified.

• Study and evaluate new method and materials to improve current process and manufacturing capability.
• Conduct DOE to determine the key process parameters and product characteristic.
• Assist production in setting up machine operation procedure and safety guidelines.
• Implement new process.
• Explore possibility of reducing material standard usage or cheaper source.
• Determine the root cause for sample rejection for process related issue.
• Adhoc duties as assigned.

Requirements:

• Degree in Mechanical/Electrical/Electronics/Materials Engineering or equivalent.
• Diploma with 2 to 3 years working experience.
• Good trouble shooting and analytical skills.
• Independent, creative, resourceful and able to take pressure.
• Good communication, report writing and presentation skills.
• Williing to commit 12 hours shift work is a plus.

12 hours shift work

Loyang Area

Manufacturing Industry

Interested Applicants, kindly email your detailed resume to [email protected]

Tempserv Pte Ltd
License No: 06C3745
Attention: Audris Teo / EA Personnel No: R1102063

Company’s Profile
Julian Grey’s client is a solution provider for security and enterprise applications.

Responsibilities

• Deploy, administer, and support database and data lake infrastructures.
• Formulate and execute plans for high availability, backup, recovery, and disaster preparedness.
• Diagnose and resolve database issues and optimize performance.
• Enforce industry-standard security measures, policies, and best practices.
• Enhance clients' data warehouses and data lakes, and maintain comprehensive documentation.

Requirements

• Proficiency in Database Administration.
• Experience with Linux operating systems and scripting.
• Practical experience with at least one of the following: Hadoop Distributions, Relational Databases, or NoSQL Databases.
• Advantageous knowledge in one or more of the following areas: Data Virtualization tools, Scripting languages, Cloud platforms, and Docker/Kubernetes environments.

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Interested Applicants
Please WA Jian Wei @ 87389860
Shortlisted candidates will be notified

Quek Jian Wei
Reg No. R22110928
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568