1. SUPPORT ASMI’S SUSTAINABILITY & INNOVATION COMMITTEE (SIC)

a. Promote adoption of innovation, decarbonisation and renewables within the marine sector

b. Facilitate transformation of the marine sector towards a low emissions future economy

c. Manage meetings of the SIC

2. ADVANCE MARINE DECARBONISATION

a. Administer the Marine Decarbonisation Champions (MDC) Programme

b. Organise MDC collateral activities

c. Engage external stakeholders including government agencies towards programme objectives

3. ORGANISE THE MARINE AND OFFSHORE (M&O) SYMPOSIUM

a. Coordinate and manage the annual industry thought leadership event

b. Showcase innovative efforts and initiatives in the marine sector

c. Engage ASMI members and other external stakeholders towards symposium objectives

4. GENERAL ADMINISTRATION

a. Support Grant writing for LEAD Programme for the Association (Primarily for the ITM Phase Two on Innovation and Sustainability)

b. Any other initiatives relating to industry development

c. Provide support to other ASMI events and activities as and when required

d. Undertake special projects and ad-hoc duties as and when assigned

The EOS/ASE Geodesy Group at NTU is searching for a Research Engineer II to work under the supervision of Prof Emma Hill on the role of tectonics in modifying regional relative sea level (RSL). The successful candidate will analyse geodetic data and conduct numerical modelling to estimate RSL related to past and future earthquakes and other processes of land-height change in Southeast Asia.

Further to this, they will work on projects aimed at effective communication of these results to policymakers and other stakeholders. They will investigate best practices for communicating probabilistic estimates of potential future impacts of earthquakes on RSL. The successful candidate will have a Bachelors’ degree in Earth Science, natural hazards, remote sensing, geodesy, computer science, data science, or a related subject. Most importantly they will have enthusiasm to engage in the research work of our group, and a passion for making Southeast Asia a safer and more sustainable place for all communities in the region.

Key Responsibilities:

• Analyze and interpret geodetic and remote sensing data from regional observing networks and satellites to further our understanding of land-height change in Southeast Asia.
• Conduct numerical modeling of tectonic processes, including to use numerical modeling techniques to model deformation resulting from viscoelastic deformation of the Earth’s asthenosphere.
• Conduct probabilistic analysis for potential future impacts of earthquakes on RSL.
• Conduct studies into best practices for communication of results on RSL from tectonics to policymakers and other key stakeholders, including discussion with these groups to learn their needs.

Job Requirements:

• Bachelor’s degree in Earth or environmental science.
• At least 4 years of experience working in an Earth science field.
• Demonstrated experience in geodetic data analysis and numerical modelling of tectonic deformation.
• Demonstrated experience conducting scientific research.
• Demonstrated ability to write and present at the level of peer-reviewed scientific journals and international conferences, which will usually be in English.
• Collaborative mindset and strong teamwork skills.
• Evidence of lead authorship of papers submitted or accepted into peer-reviewed journals would be a plus.

EOS seeks a diverse and inclusive workforce and is committed to equality of opportunity. We welcome applications from all and recruit on the basis of merit, regardless of age, race, gender, religion, marital status and family responsibilities, or disability. Interested applicants should submit a CV and a statement of interests. Evaluation of application starts immediately until the position is filled. We regret to inform that only shortlisted candidates will be notified.

To apply, please submit a CV, cover letter, statement of research interests, and the names of three referees.

We regret to inform that only shortlisted candidates will be notified.

Join Our Team at the School of Physical and Mathematical Sciences, Nanyang Technological University, Singapore

The School of Physical and Mathematical Sciences (SPMS) at NTU Singapore hosts research and education activities in two divisions: Division of Mathematical Sciences (MAS) and Division of Physics and Applied Physics (PAP). MAS covers diverse topics ranging from pure mathematics to the applications of mathematics in cryptography, computing, business, and finance. PAP covers many areas of fundamental and applied physics, including quantum information, condensed matter physics, biophysics, and photonics. Over the years, SPMS has attracted talented individuals from around the world and Singapore to join as scientific leaders and researchers.

Join the laboratory of Zhongjian Wang at SPMS. We are seeking a Research Fellow to contribute to a project focused on machine learning, seismic imaging and monitoring of the Lumut Balai geothermal field in Indonesia.

Key Responsibilities:

• Seismic data collection, processing, and analysis, specifically for the Lumut Balai geothermal field, Indonesia
• Developing new seismic imaging techniques to reveal detailed subsurface structures at 0-10 km depths. The techniques will be then integrated with modern machine learning technology
• Applying novel earthquake location methods to monitor microseismicity in the Lumut Balai geothermal field
• Publish high-quality scientific results in Tier-1 journals

Job Requirements:

• PhD degree in Geophysics, Mathematics, Physics, or related areas, with focus on seismic imaging
• Experience in inverse problems, seismic data analysis, and geological interpretation
• Proficient in coding languages, such as C, C++, Fortran, and Python.
• Strong publication record
• Entry level candidates are welcome to apply

The College of Science seeks a diverse and inclusive workforce and is committed to equality of opportunity. We welcome applications from all and recruit on the basis of merit, regardless of age, race, gender, religion, marital status and family responsibilities, or disability.

We regret to inform that only shortlisted candidates will be notified.

Panel Assistant Position (Part-time) in Singapore SSC

MMR is an independent, global consumer and sensory research agency specializing in food, drink, personal and household care research. We are industry leaders, guiding best in class innovation for our clients – partnering with over 50% of the top 100 global food and drink brands. The chances are the last time you went to the supermarket, you bought something that we’ve influenced on its way to the shelves.

We are looking for a proactive individual to join our sensory team as a part-time Sensory Panel Assistant for a 9 month fixed term contract based in Singapore.

The Sensory Panel Assistant reports to the Sensory Manager, assisting them to ensure that sensory projects run smoothly by managing all activities related to the sensory panels’ sessions, overseeing sensory laboratory productivity, and supervising kitchen technicians.

This will be a 9 month fixed term contract starting immediately, running until September 2025

Hours of Work: 3 days - Tuesday and Thursday 9-6pm and Wednesday 9-1pm

Flexibility required according to panel schedule (additional time may be required if more panel sessions or reduced hours if panel session hours are shorter)

Location: Harbourside 1, 1 Boon Leat Terrace, S119843 #05-01

Rate: SGD 14

Responsibilities:

• To assist in all aspects of the running of the Sensory Panel sessions including research, source, prepare and manage products and sensory references for sensory panel sessions
• Receive, store, inventory and prepare samples/materials for all sensory panel sessions
• Ensure that all activities carried out comply with basic food hygiene standards within the laboratory – Basic food hygiene training will be provided.
• To ensure the Sensory Panel working area is prepared appropriately in good time for each session and cleared/cleaned after
• To manage day to day activities of support technicians/helper/cleaners where they are available for more basic or routine tasks
• To assist in the preparation and set up of recruitment screening sessions, making up screening solutions/products, and facilitating the sessions with candidates in the booth area
• To monitor the quality of food samples and test procedure and ensure appropriate records are maintained.  This includes temperature logs for freezers/fridges, cooking logs, inventory logs with BB/Use by dates.
• To assist the Sensory SRE/Manager or any other member of the Sensory Science Centre with any other tasks as required.      
• Responsible for general maintenance and organization of work areas ensuring escalation of any issues if cannot be resolved on own

• To assist in the preparation and set up of recruitment screening sessions, making up screening solutions/products, and facilitating the sessions with candidates in the booth area
• To monitor the quality of food samples and test procedure and ensure appropriate records are maintained.  This includes temperature logs for freezers/fridges, cooking logs, inventory logs with BB/Use by dates.
• To assist the Sensory SRE/Manager or any other member of the Sensory Science Centre with any other tasks as required.      
• Responsible for general maintenance and organization of work areas ensuring escalation of any issues if cannot be resolved on own
• Creation of clear and logically formatted product inventories for every project making use of templates where appropriate, collating product detail in PowerPoint format using MMR templates and formatting.
• Assist with documentation of project samples by collation of pictures throughout the project cycle – e.g. pictures of pack, product preparation, product serve, references and any other detail relevant for sharing with client or for future understanding by the project team

Preferred Qualifications:

• Basic Food Hygiene qualification / an aptitude for food preparation with limited supervision needed

• Excellent organizational skills and the ability to multi-task and work effectively in a fast-paced environment

• Strong collaboration and communication skills
• Being able to function well within a team
• Able to work independently, a self-starter who likes to take initiatives with a logical, analytical mind.
• Computer literate, with knowledge of Microsoft Word, Excel and Outlook. (Training will be given in the relevant software packages)
• Innovative – finding solutions to problems whilst maintaining and observing robust scientific principles
• Natural passion for seeking out the most effective and efficient ways of working and being prepared to speak up about your ideas
• A plus: being a lover of good food and passionate about cooking

MMR Research Worldwide is an Equal Opportunities Employer.

NTI-NTU Corporate Laboratory is a collaboration between Nanofilm Technologies International Limited (“Nanofilm”, “NTI”), Nanyang Technological University (“NTU”) and supported by Singapore under RIE2025. The Laboratory’s objective is to propel Innovation and Technologies commercialisation through NTU’s innovation and NTI’s deep technology. NTI-NTU Corporate Laboratory aligns with Singapore’s RIE2025 handbook – which emphasises the nation’s commitment to research and innovation, aiming to drive economic growth and address national challenges.

The Nanyang Technological University NTI-NTU Corporate Laboratory is seeking to hire a Research Associate. The selected candidate will innovate Optical and Metasurface Design.

Key Responsibilities:

• Responsible for optical system design and development for metasurface based SLM 3D Holograph Display, Near-Eye Display, Virtual Reality and Augmented Reality etc. applications.
• Good experience on optical lens and system (e.g. Metalens) design
• Research meeting arrangement with project PIs and researchers
• Perform and analyze material/optics characterization
• Prepare monthly reports and presentations for meetings and project deliverables.

Job Requirements:

• A Master degree in the areas of Optical Engineering and/or Photonics devices and System.
• Knowledge and/or experience in using optical simulation tools such as Zemax, CodeV etc.
• Good interpersonal skills with the ability to work independently and also in a team environment.
• Entry level candidates are welcome to apply.

We regret that only shortlisted candidates will be notified.

Job Description

• Develop and oversee execution of the MedTech Pillar"s strategy with a focus on value creation for members
• Work with Pillar Tech Lead and PM Lead to align on strategy and priorities
• Manage and development Pillar"s Anchor and Tier 1 accounts
• Develop business case and work with PI and PM to initiate and to secure joint labs with Anchor and Tier 1 members
• Ensure overall "health" of Pillar and performance targets are met
• Report to BD Director

Requirements

• Bachelors or Masters qualifications in a relevant field such as Business Management preferred
• Minimum 8 to 10 years of relevant experience
• Experience in leading and managing sales or business development teams
• Proven track record of business development, driving sales or revenue growth
• Knowledge in developing and executing marketing and sales strategy
• Good verbal and written communication

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

JOB DESCRIPTION: Candidate will be involved in industry projects and use 3D printing technology and other post processes to build parts using polymer reinforced fiber composite materials.

RESPONSIBILITIES:

-Operate equipment to perform 3D printing and relevant post-processes (e.g. cam-based systems), mechanical charaterisation such as tensile, bending, compression tests and inspection (e.g., CMM) as part of the industry project.

-Responsible for generating jig and fixturing 2D/3D drawings for documentation and archiving purposes.

-Manage and work with local machining house for jig and fixture fabrication and assembly.

-Carry out routine maintenance, diagnostics checks and engage equipment vendors for preventive maintenance.

-Perform function testing to verify equipment readiness after maintenance or material change.

-Plan equipment schedule, maintain and improve lab environment. Manage raw feedstock and maintain stock/inventory list.

-Responsible for ensuring duties are performed in a safe, efficient, and effective manner.

JOB REQUIREMENTS:

-NITEC or Diploma in engineering related qualifications.

-At least 5-year work experience in manufacturing roles within the aerospace / MRO / oil and gas / manufacturing industry. Candidates with > 5-year experience will be considered for a senior role.

-Capabilities in CAD and 2D drawings using NX/SolidWorks, with knowledge in GD&T will be beneficial.

-Traditional methods of inspections such as CMM/handheld measurement tools and preparation of FAI documents is preferred.

-Familiarity in handling CAM based systems such as robotic system/CNC is an added advantage.

-Methods of processing and post processing of plastic parts such as prototyping of plastic parts and knowledge in fixture design for machining is preferred.

-A team player who is motivated to solve technical challenges and deliver on time to customers.

-Willingness to learn and adapt to new technology promptly.

-Good communication and interpersonal skills.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

The Advanced Remanufacturing and Technology Centre (ARTC) is a public-private partnership consortium of more than 80 industry members. Our core mission is to develop and deploy advanced manufacturing solutions and upskill the workforce to drive local industry competitiveness. Smart Virtual Systems (SVS) Group is seeking a highly motivated Scientist/ Senior Scientist to lead and conduct research in predictive modelling, as well as AI-driven search and optimization algorithms for enabling human-centric enterprise resource planning and scheduling. He/she is expected to be independent and initiative-driven, demonstrating the capacity to discover innovative solutions to challenges.

The key roles & responsibilities include:

• Research into novel learning-centric optimization algorithms for efficient multi-resource planning.
• Work with a team of scientists and engineers to enhance and develop the planning capabilities of existing or new enterprise decision-support system
• Formulate scientific research directions and innovative proposals to secure competitive funding
• Understand the latest trend in manufacturing domain (e.g., Industry 5.0) and provide innovative solutions to industry problems in this area

Job Requirements

• PhD degree in AI, Computer Science, Operations Research, or other relevant disciplines with emphasis on optimization, machine learning and data-science
• 8 years' experience in research and leadership of R&D projects in the relevant area of expertise (for Senior Scientist).
• Programming/coding skills in developing optimization and machine learning algorithms.
• Good track record of scientific publications in top journals or conferences
• Excellent technical presentation and writing skills
• Can do attitude and happy to interface with multiple stakeholders
• Proactive team player and technically motivated to solve problems innovatively

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

The Remanufacturing Process Technology (RPT) Group in ARTC is looking for a responsible and motivated laboratory officer to join the group. The lab officer?s responsibilities include sample preparation, characterization, measurement, and mechanical testing. The lab officer also supports group?s research activities through procurement, design of experiments, equipment scheduling, risks identification and assessment to ensure efficient and safe operation of our labs. There will be opportunities to acquire advanced CAD/CAM skills and equipment operations through involvement in industry and competitively funded projects related to remanufacturing process technologies. The roles and responsibilities include the following areas:

-Perform material testing, sample preparation, dimensional measurements, surface quality inspection, microstructure & defects analysis.

-Tracking and managing lab resource utilization, procurement, and delivery.

-Storage space management and optimization.

-Ensure high operational readiness by troubleshooting breakdowns, maintaining supplies, performing preventive maintenance, and liaising for repairs.

-Planning equipment maintenance and facilitating mechanical and electrical installations for new equipment.

-Assist in scheduling equipment utilization and procurement for project consumables.

-Assist in lab equipment operation, collection of process data and analysis of results.

-Secondary roles related to health, safety, environment, and procurement to manage the Risk Assessment (RA), Standard Working Procedures (SWP), Permit to Work (PTW), and chemical purchasing and storage.

-Identify and recommend improvement measurements to ensuring high quality in lab safety and 5S standards.

Detailed Job requirements:

• Polytechnic/ Technical Diploma in Engineering
• 1-2 years of experience working in a lab is preferred.
• Experience with engineering CAD/CAM software such as NX UniGraphics, SolidWorks, AutoCAD will be advantageous.
• Strong attention to detail.
• Excellent verbal and written communication skills.
• Proficient in MS office.
• Ability to learn and adapt new technologies to stay relevant.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

JOB DESCRIPTION: Candidate will be involved in industry projects and use 3D printing technology and other post processes to build parts.

RESPONSIBILITIES:

-Carry out data preparation and operate equipment to perform 3D printing, post-processes, inspection and testing as part of the industry project.

-To perform characterisation of coupons and components fabricated using 3D printing.

-Good skills in recording data, preparing and presenting technical results.

-Responsible for preparing and maintaining documentation for the operation of different equipment.

-Carry out routine maintenance, diagnostics checks, engage OEM vendors for preventive maintenance.

-Practice good housekeeping, organisation, and safety in the workplace.

-Responsible for ensuring duties are performed in a safe, efficient, and effective manner.

-To be a team player and learn new skillsets in an integrated team that develops new and advanced additive manufacturing technologies.

JOB REQUIREMENTS:

-NITEC or Diploma in Industrial Engineering, Aerospace Engineering, Mechanical Engineering, or in a relevant engineering discipline.

-At least 2-years work experience in manufacturing roles within the aerospace / MRO / oil and gas / manufacturing industry.

-Hands on experience with CAD/CAM software preferably NX would be preferred.

-Hands on experience in 3D printing is an added advantage.

-A team player who is motivated to solve technical challenges and deliver on time to customers.

-Willing to learn and adapt to cutting edge technology quickly.

-Good communication and interpersonal skills.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

The Advanced Remanufacturing and Technology Centre (ARTC) is a public-private partnership consortium of more than 80 industry members. Our core mission is to develop and deploy advanced manufacturing solutions and upskill the workforce to drive local industry competitiveness. Smart Virtual Systems (SVS) Group is seeking a highly motivated Scientist/ Senior Scientist to lead and conduct research in predictive modelling, as well as AI-driven search and optimization algorithms for enabling human-centric enterprise resource planning and scheduling. He/she is expected to be independent and initiative-driven, demonstrating the capacity to discover innovative solutions to challenges.

The key roles & responsibilities include:

• Research into novel learning-centric optimization algorithms for efficient multi-resource planning.
• Work with a team of scientists and engineers to enhance and develop the planning capabilities of existing or new enterprise decision-support system
• Formulate scientific research directions and innovative proposals to secure competitive funding
• Understand the latest trend in manufacturing domain (e.g., Industry 5.0) and provide innovative solutions to industry problems in this area

Job Requirements

• PhD degree in AI, Computer Science, Operations Research, or other relevant disciplines with emphasis on optimization, machine learning and data-science
• 5 years' experience in research and leadership of R&D projects in the relevant area of expertise (for Senior Scientist).
• Programming/coding skills in developing optimization and machine learning algorithms.
• Good track record of scientific publications in top journals or conferences
• Excellent technical presentation and writing skills
• Can do attitude and happy to interface with multiple stakeholders
• Proactive team player and technically motivated to solve problems innovatively

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

The Remanufacturing Process Technology (RPT) Group in ARTC is looking for a responsible and motivated laboratory officer to join the group. The lab officer?s responsibilities include sample preparation, characterization, measurement, and mechanical testing. The lab officer also supports group?s research activities through procurement, design of experiments, equipment scheduling, risks identification and assessment to ensure efficient and safe operation of our labs. There will be opportunities to acquire advanced CAD/CAM skills and equipment operations through involvement in industry and competitively funded projects related to remanufacturing process technologies. The roles and responsibilities include the following areas:

-Perform material testing, sample preparation, dimensional measurements, surface quality inspection, microstructure & defects analysis.

-Tracking and managing lab resource utilization, procurement, and delivery.

-Storage space management and optimization.

-Ensure high operational readiness by troubleshooting breakdowns, maintaining supplies, performing preventive maintenance, and liaising for repairs.

-Planning equipment maintenance and facilitating mechanical and electrical installations for new equipment.

-Assist in scheduling equipment utilization and procurement for project consumables.

-Assist in lab equipment operation, collection of process data and analysis of results.

-Secondary roles related to health, safety, environment, and procurement to manage the Risk Assessment (RA), Standard Working Procedures (SWP), Permit to Work (PTW), and chemical purchasing and storage.

-Identify and recommend improvement measurements to ensuring high quality in lab safety and 5S standards.

Detailed Job requirements:

• Polytechnic/ Technical Diploma in Engineering
• 1-2 years of experience working in a lab is preferred.
• Experience with engineering CAD/CAM software such as NX UniGraphics, SolidWorks, AutoCAD will be advantageous.
• Strong attention to detail.
• Excellent verbal and written communication skills.
• Proficient in MS office.
• Ability to learn and adapt new technologies to stay relevant.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

The Remanufacturing Process Technology (RPT) Group in ARTC is looking for a responsible and motivated laboratory officer to join the group. The lab officer?s responsibilities include operation of high-power lasers for cleaning related experiments, metal and composite sample preparation, characterization, measurement, and mechanical testing. The lab officer also supports group?s research activities through procurement, design of experiments, equipment scheduling, risks identification and assessment to ensure efficient and safe operation of our labs. The roles and responsibilities include the following areas:

· Perform high-power laser material processing using robotics, CNC and hand-held systems on-site of ARTC and occasional visit to customer sites.

· Perform material testing, sample preparation, microstructure & defects analysis in fabricated coupons and parts.

· Tracking and managing lab resource utilization, procurement, and delivery.

· Storage space management and optimization.

· Ensure high operational readiness by troubleshooting breakdowns, maintaining supplies, performing preventive maintenance, and liaising for repairs.

· Planning equipment maintenance and facilitating mechanical and electrical installations for new equipment.

· Assist in scheduling equipment utilization and procurement for project consumables.

· Secondary roles related to health, safety, environment, and procurement to manage the Risk Assessment (RA), Standard Working Procedures (SWP), Permit to Work (PTW), and chemical purchasing and storage.

· Identify and recommend improvement measurements to ensuring high quality in lab safety and 8S standards

Detailed Job requirements:

· Polytechnic/ Technical Diploma in Engineering

· Ability to learn and adapt new technologies to stay relevant.

· Excellent verbal and written communication skills.

· Ability to learn and adapt new technologies to stay relevant.

· Excellent verbal and written communication skills.

· Experience with high-power laser is preferred.

· 2 years of experience working in a lab is preferred.

· Strong attention to detail.

· Proficient in MS office.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

The Remanufacturing Process Technology (RPT) Group in ARTC is looking for a responsible and motivated laboratory officer to join the group. The lab officer?s responsibilities include operation of high-power lasers for cleaning related experiments, metal and composite sample preparation, characterization, measurement, and mechanical testing. The lab officer also supports group?s research activities through procurement, design of experiments, equipment scheduling, risks identification and assessment to ensure efficient and safe operation of our labs. The roles and responsibilities include the following areas:

· Perform high-power laser material processing using robotics, CNC and hand-held systems on-site of ARTC and occasional visit to customer sites.

· Perform material testing, sample preparation, microstructure & defects analysis in fabricated coupons and parts.

· Tracking and managing lab resource utilization, procurement, and delivery.

· Storage space management and optimization.

· Ensure high operational readiness by troubleshooting breakdowns, maintaining supplies, performing preventive maintenance, and liaising for repairs.

· Planning equipment maintenance and facilitating mechanical and electrical installations for new equipment.

· Assist in scheduling equipment utilization and procurement for project consumables.

· Secondary roles related to health, safety, environment, and procurement to manage the Risk Assessment (RA), Standard Working Procedures (SWP), Permit to Work (PTW), and chemical purchasing and storage.

· Identify and recommend improvement measurements to ensuring high quality in lab safety and 8S standards

Detailed Job requirements:

· Polytechnic/ Technical Diploma in Engineering

· Ability to learn and adapt new technologies to stay relevant.

· Excellent verbal and written communication skills.

· Ability to learn and adapt new technologies to stay relevant.

· Excellent verbal and written communication skills.

· Experience with high-power laser is preferred.

· 1-2 years of experience working in a lab is preferred.

· Strong attention to detail.

· Proficient in MS office.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

JOB DESCRIPTION: Candidate will be involved in industry projects and use 3D printing technology and other post processes to build parts using polymer reinforced fiber composite materials.

RESPONSIBILITIES:

-Operate equipment to perform 3D printing and relevant post-processes (e.g. cam-based systems), mechanical charaterisation such as tensile, bending, compression tests and inspection (e.g., CMM) as part of the industry project.

-Responsible for generating jig and fixturing 2D/3D drawings for documentation and archiving purposes.

-Manage and work with local machining house for jig and fixture fabrication and assembly.

-Carry out routine maintenance, diagnostics checks and engage equipment vendors for preventive maintenance.

-Perform function testing to verify equipment readiness after maintenance or material change.

-Plan equipment schedule, maintain and improve lab environment. Manage raw feedstock and maintain stock/inventory list.

-Responsible for ensuring duties are performed in a safe, efficient, and effective manner.

JOB REQUIREMENTS:

-NITEC or Diploma in engineering related qualifications.

-At least 8-year work experience in manufacturing roles within the aerospace / MRO / oil and gas / manufacturing industry. Candidates with > 5-year experience will be considered for a senior role.

-Capabilities in CAD and 2D drawings using NX/SolidWorks, with knowledge in GD&T will be beneficial.

-Traditional methods of inspections such as CMM/handheld measurement tools and preparation of FAI documents is preferred.

-Familiarity in handling CAM based systems such as robotic system/CNC is an added advantage.

-Methods of processing and post processing of plastic parts such as prototyping of plastic parts and knowledge in fixture design for machining is preferred.

-A team player who is motivated to solve technical challenges and deliver on time to customers.

-Willingness to learn and adapt to new technology promptly.

-Good communication and interpersonal skills.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

JOB DESCRIPTION

Responsibilities:

• Responsible for leading and managing a large-scale grant-funded programme across various IHL/RI* collaborators and industry partnerships (*Institute of Higher Learning / Research Institute)
• Programme manager will be leading the programme proposal to secure funding and coordinate cross-project activities to accomplish strategic objectives by overseeing multiple project activities across various research institutes
• Organise and lead programme reviews with/across funding agencies, strategic oversight committee and senior management
• Build confidence within internal management and external stakeholders with regular programme reporting and establishing clear communication channels
• Manage a small team of project managers to ensure successful delivery of projects scope and targets via managing project risks, quality, delivery, scope, schedule, and budget.
• Oversight of the full life cycle of R&D projects and its product delivery – planning, organizing, executing and evaluating from conception to completion.
• Manage and implement project/programme changes and interventions to achieve project deliverables and mitigate risk.

JOB REQUIREMENTS

• Bachelor or Masters in any engineering / project management related discipline
• At least 5 year(s) of working experience in product development or research project would be preferable
• PMP certifications or equivalent will be advantageous
• Good level of understanding of technical/engineering processes in order to work effectively with project managers and teams throughout the project development cycle.
• Strong business acumen, driven to deliver customer requirements and project deadlines
• Outstanding programme/project management capabilities; i.e. planning, risk management, status reporting, budget tracking, benefits analysis, stakeholder management, resource management
• Proven track record of executing multiple successful programmes/projects
• A leader-cum-team player technically motivated to solve problems, innovate and deliver to internal and external customers
• Strong communicator with excellent interpersonal skills

JOB DESCRIPTION: Candidate will be involved in industry projects and use 3D printing technology and other post processes to build parts.

RESPONSIBILITIES:

-Carry out data preparation and operate equipment to perform 3D printing, post-processes, inspection and testing as part of the industry project.

-To perform characterisation of coupons and components fabricated using 3D printing.

-Good skills in recording data, preparing and presenting technical results.

-Responsible for preparing and maintaining documentation for the operation of different equipment.

-Carry out routine maintenance, diagnostics checks, engage OEM vendors for preventive maintenance.

-Practice good housekeeping, organisation, and safety in the workplace.

-Responsible for ensuring duties are performed in a safe, efficient, and effective manner.

-To be a team player and learn new skillsets in an integrated team that develops new and advanced additive manufacturing technologies.

JOB REQUIREMENTS:

-NITEC or Diploma in Industrial Engineering, Aerospace Engineering, Mechanical Engineering, or in a relevant engineering discipline.

-At least 4-years work experience in manufacturing roles within the aerospace / MRO / oil and gas / manufacturing industry.

-Hands on experience with CAD/CAM software preferably NX would be preferred.

-Hands on experience in 3D printing is an added advantage.

-A team player who is motivated to solve technical challenges and deliver on time to customers.

-Willing to learn and adapt to cutting edge technology quickly.

-Good communication and interpersonal skills.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

A Corp Lab in NTU is looking for a Research Engineer I or II to work on Large Language Models for Health. This role requires a passion for innovation, the ability to work effectively in a collaborative environment, and a commitment to contributing to groundbreaking discoveries in project-based research.

Key Responsibilities:

• Work closely with the Principal Investigator (PI) and team members/engineers to design and implement LLMs-based conversational agents.
• Assist in data and LLM analysis and conducting experiments for project-based research questions.
• Assist in developing algorithms and models based on existing LLMs to enhance multi-turn conversations, proactive inquiry, and knowledge-guided common-sense reasoning in conversational agents.

Job Requirements:

• Master’s degree or Bachelor’s Degree in computer science/engineering.
• Solid knowledge in Natural Language Processing, LLMs, or conversational AI.
• Proficient in programming languages and frameworks relevant to machine learning, specifically Python and PyTorch.
• Able to test, debug and optimize existing code base and other features.
• Excellent communication skills and good problem-solving skills.
• Relevant publication record in NLP and conversational AI is preferred.

We regret that only shortlisted candidates will be notified.

Lee Kong Chian School of Medicine (LKCMedicine) established in September 2010 is a partnership between Imperial College London and Nanyang Technological University, Singapore. The school operates from two campuses – Yunnan Campus at Nanyang Technological University and a new campus to be built at Novena. Our primary healthcare partner is the National Healthcare Group (NHG) which comprises an integrated network of primary healthcare polyclinics, acute care hospitals such as Tan Tock Seng Hospital, and national specialist centres. LKCMedicine delivers a new five-year undergraduate medical programme leading to a joint MBBS degree awarded by Imperial College London and Nanyang Technological University.

Antimicrobial drug resistance is a growing an alarming problem that poses serious challenges to the existing public health infrastructure of Singapore and of the rest of the world. Microbial pathogens are becoming more and more difficult to treat as they steadily gain partial and full resistance to last-line antibiotics.

Recalcitrant infections can add enormous costs and strains to health care systems that are already stressed. This is especially a concern in Singapore, where between now and 2030, the health care system will need to accommodate the costs associated with a population that will undergo an unprecedented age shift in which the number of residents aged 65 years or older will increase threefold. Altogether, there is an urgent need to develop new alternatives or compatible therapies to combat the growing problem of AMR.

We are currently recruiting a Research Fellow who will be working closely with Dr Kevin Pethe as part of a large interdisciplinary team.

Key Responsibilities:

The appointed Research Fellow will lead studies to evaluate the potency and pharmacokinetics of therapeutic phages in animal models of bacterial infections. The successful candidate will have the opportunity to work in a dynamic research environment with access to state-of-the-art core facilities.

• Lead research projects
• Evaluate bacteriophages in animal models of infection
• Study phages biology

Competencies and Qualification Requirements:

• PhD in Biological/Biomedical Sciences with expertise in bacteriology or infectious diseases (BSL-2).
• At least 1 years’ experience as Research Fellow
• Expertise in tissue culture, bacteriology, molecular biology and animal work

Centre for Lifelong Learning and Individualised Cognition CLIC is a research collaboration between the University of Cambridge and Nanyang Technological University (NTU) and hosted by the Cambridge Centre for Advanced Research and Education in Singapore (CARES) that aims to develop neuroscience-based interventions for lifelong flexible learning. Launched in October 2020 and funded by the National Research Foundation Singapore, CLIC brings together a multidisciplinary team of psychologists, neuroscientists, linguists and educators who conduct innovative research in the science of learning.

The world of today is constantly evolving to keep pace with advances in technology and globalisation, requiring individuals to adapt and develop new skills to ensure resilience through a culture of lifelong flexible learning. Mental flexibility is required in order to adapt to change, problem-solve creatively in new situations and make the most of opportunities including emerging career opportunities. The capacity for cognitive flexibility is thus central to the modern digital age and our education system needs innovation to ensure citizens are equipped to develop these future skills. For example, major global challenges, including climate change, renewable energy, and food security, will require novel and creative approaches and solutions.

CLIC researchers are developing a neuroscience-based model of flexible learning, including important social contextual factors, in order to inform the design of practical, real-life interventions for use in schools and the workplace. This will ensure that individuals are not only prepared for future career success, but also have a good quality of life and wellbeing, thus supporting a flourishing society.

For more details, please view: https://www.cares.cam.ac.uk/research/clic/

We are looking for a Research Fellow to support research activities on neuroimaging, and training-related brain changes in adults. The role will focus on opportunities for involvement in research activities related to human neuroimaging, language, infant cognition/learning and pedagogy. We anticipate the successful candidate to perform within a dynamic interdisciplinary research environment working collaboratively with project team members.

Key Responsibilities:

• Perform computational modelling and analysis of the neuroimaging and behavioural data from cognitive and related domain tasks
• Development and implementation of neuroimaging data analyses pipelines
• Conduct analysis of data and summarise research findings
• Development and implementation of data transfer and curation protocols
• Liaise with other workgroups on data management and multi-modal analyses

Job Requirements:

• PhD degree in experimental psychology, biopsychology, cognitive psychology, neuropsychology, neurology, psychiatry, cognitive neuroscience, biomedical engineering, computer science, or related fields.
• At least 2 years of relevant experiences in similar role / technical hands-on experience in specific scope
• Advanced signal processing and programming skills (e.g. with Matlab, Python)
• Experience with neuroimaging techniques (MRI, EEG and/or TMS).
• Familiarity with image data analysis tools such as SPM, FSL, AFNI, and/or DSIStudio, etc.
• Experience with statistical packages, especially R and SPSS
• Good statistical knowledge and skills
• Good IT skills (i.e., Microsoft Office®)
• Strong ability to work within a multidisciplinary team
• Strong interpersonal, written and verbal communication skills
• Excellent organizational skills and able to work within given deadlines

We regret to inform that only shortlisted candidates will be notified.

Digital Trust Centre (DTC) is looking for a candidate to join them as a Research Engineer II.

Key Responsibilities:

• Conduct cutting-edge research in large language models, translating theoretical algorithms, frameworks, and methodologies into practical, working prototypes that demonstrate potential product applications.
• Collaborate closely with researchers and engineers to design and implement system architectures and software solutions that transition research findings into scalable, deployable products.
• Develop and build tools and frameworks to facilitate the transfer of LLM capabilities to industry partners, showcasing the practical value and impact of the research outcomes.
• Create and maintain comprehensive technical documentation, including white papers, presentations, and tutorials, to disseminate knowledge to a broader audience and enhance overall expertise in these emerging areas.
• Engage with international research communities and partners to stay abreast of the latest advancements in machine unlearning, contributing to discussions, collaborations, and initiatives that elevate Singapore’s position in the global AI and privacy research landscape.

Job Requirements:

• Minimum Masters’s degree in computer science/ engineering or related fields.
• Proficiency in Python is a must. Experience with other programming languages such as Java, C/C++, or Go, and frameworks like PyTorch or TensorFlow, is highly advantageous.
• Experience in developing and deploying machine learning models, particularly in natural language processing (NLP) and large language models (LLMs), including tasks such as data preprocessing, feature extraction, model training, and evaluation.
• Strong knowledge of machine learning and deep learning techniques, including knowledge graphs, machine unlearning, and AI testing.
• Proficiency in working with common Linux distributions (e.g., Ubuntu, CentOS) and familiarity with shell scripting and command-line tools.
• Experience with cloud platforms (AWS, GCP, Azure) and containerization technologies (Docker, Kubernetes) is a must.
• Experience with version control systems (e.g., Git) and collaborative development tools.
• Experience in developing ML systems from end to end, including data exploration, feature engineering, model training/evaluation will be advantageous.
• Ability to communicate complex technical concepts effectively to both technical and non-technical stakeholders, bridging the gap between research and practical application.
• Strong analytical and problem-solving skills, with a focus on developing innovative solutions for LLMs.
• Self-motivated and able to work independently, managing multiple tasks and projects in a fast-paced environment.
• Strong collaborative skills, with experience working in cross-functional teams.
• Keen attention to detail and commitment to high-quality deliverables.
• Understanding of ethical considerations and best practices in AI research, particularly concerning data privacy and security.
• Ability to code-switch effortlessly between talking business and talking tech, and can help stakeholders, engineers, and businesses easily understand difficult research tech concepts.
• Experience in AI model testing methodologies, including robustness, fairness, and explainability assessments, as well as understanding data privacy and security considerations in AI.
• Good understanding of relational database and Unix shell scripting skills.

We regret to inform that only shortlisted candidates will be notified.

We are looking to appoint a full-time Project Officer at the School of Humanities in Nanyang Technological University (NTU).

The incumbent will join the Linguistics and Multilingual Studies (LMS) Department working on a project titled ‘Performance-interpretability Tradeoff in Discourse Research’ led by Professor Dennis Tay. The position is a fixed term post for 17 months.

About the Project

The performance-interpretability tradeoff (PIT) in data science and AI refers to the balance between how well a statistical/machine learning model performs, and how readily humans can comprehend it. This project investigates the nature and characteristics of PIT in discourse research, focusing on the following:

i) the (strategically) indeterminate nature of PIT

ii) PIT in time-based algorithms and discourses

iii) conceptual relationship(s) between PIT and ‘mixed-methods’ discourse research, with subsequent developments based on emergent findings.

Discourse datasets to be investigated include psychological counseling, social media, academic lectures, and other relevant time-based contexts, while time-based algorithms include LSTM, ARIMA time series, and survival regression models. The project also aims to design and develop relevant pedagogical resources aimed at students and the general public.

Key Responsibilities:

• Assist in sourcing and collecting language and discourse datasets across different domains
• Assist in pre-processing discourse data for analysis
• Assist in preparation of research output, pedagogical resources, and/or other project-related deliverables

Job Requirements:

• Good Bachelor’s degree in linguistics, language studies, data science, or related fields
• Strong verbal and written communication skills
• Working knowledge of Natural Language Processing and Python / R is an advantage

Interested applicants may apply with submission of the Curriculum Vitae.

We regret to inform that only shortlisted candidates will be notified.

Join Our Team at the School of Biological Sciences, Nanyang Technological University, Singapore

The School of Biological Sciences (SBS), part of the College of Science, was established in 2002 with a mission to advance biological and biomedical sciences. At SBS, our research spans various areas, including infectious diseases, immunology, neurodegenerative diseases, telomere biology, and genome function. Over the years, SBS has attracted talented individuals from around the world and Singapore to join as scientific leaders and researchers.

Position Available: Research Fellow

Join the laboratory of Associate Professor Francesc Xavier Roca Castella at the School of Biological Sciences. We are seeking a Research Fellow to contribute to a project focusing on the prediction and testing of genetic variants potentially affecting splicing by in silico and mainly experimental methods.

Key Responsibilities:

• Designing and executing experiments and analyses to predict and test genetic variants that could affect RNA splicing. Key techniques include splicing minigenes, high-throughput sequencing, and CRISPR-mediated gene editing.
• Interpreting experimental data and outlining its implications (substantial experience in these areas is required)
• Preparing manuscripts and presentations for both internal and external audiences
• Mentoring and train Project Officers, PhD students, and undergraduate interns, contributing to the scientific development and productivity of the lab
• Collaborative teamwork is essential

Job Requirements:

• A PhD in Biology, Molecular and/or Cellular Biology, Biochemistry, or related disciplines, with a focus on RNA splicing or related topics
• Experience in at least five of the following areas:
  Cell culture
  Standard molecular biology techniques
  RNA biology
  Human genetics
  RNA splicing
  Next-generation sequencing
  Bioinformatics
• Strong written and verbal communication skills in English - essential for data analysis and communication with stakeholders
• Strong publication record
• Entry level candidates are welcome to apply

The College of Science seeks a diverse and inclusive workforce and is committed to equality of opportunity. We welcome applications from all and recruit on the basis of merit, regardless of age, race, gender, religion, marital status and family responsibilities, or disability.

Interested applicants are invited to apply directly at our NTU Career Portal.

We regret that only shortlisted candidates will be notified.

Established in 2010, the Energy Research Institute @ NTU (ERI@N) is a pan-university research institute that focuses on systems-level research for tropical megacities. It performs translational research that covers the energy value chain from generation to innovative end-use solutions, motivated by industrialisation and deployment. ERI@N has multiple Interdisciplinary Research Programmes which focus on translational Research, Development & Deployment which focus on specific area of the energy value chain, and a number of Living labs and Testbeds which facilitate large scale technology deployment enabling validation and demonstration of real-world applications.

This project will be on recycling of spent lithium ion batteries.

Key Responsibilities:

• Scoping studies on recycling of lithium- ion batteries and circular economy potential in Singapore
• Experimental techniques for upcycling metals
• Synthesis and characterization of battery materials and fabrication. Precipitation, characterization and purity analysis of products by various characterization techniques
• Carry out optimization of the equipment and SOP of various processes for batteries
• Prototyping activities including proof of concept demonstration of successful processes
• Responsible for project goals, deliverables, and objectives of the company project
• Preparing and delivering Meeting presentations, notes, updates, and reports as per the request of the project

Job Requirements:

• Possess at least a Bachelor’s degree in Materials Science/Engineering or related disciplines.
• Experience in working on battery systems , Recycling
• Synthesis of new cathode and anode materials for batteries
• Wide knowledge of different synthesis methodology for various materials
• Expertise in materials characterization techniques including ICP-OES, XRD, SEM, TEM, spectroscopic techniques,
• Knowledge of electrochemical studies, including such as electrodialysis, electrodeposition, galvanostatic, potentiostatic, impedance techniques
• An effective team player with good communication & interpersonal skills
• Ability to work in a team as well as independently without supervision
• Able to work under pressure and meet tight deadlines
• Good interpersonal skills.
• Good communication and writing in English - for research purposes
• Strong responsibility for research / work

We regret to inform that only shortlisted candidates will be notified.

The School of Mechanical & Aerospace Engineering (MAE) invites applications for the position of Research Fellow. The Research Fellow will be working on high-resolution imaging, bioimaging and metrology projects at the centre.

Key Responsibilities:

• Expected to work with the PI and other team members for doing R & D and take key role for the development of the systems for bioimaging and metrology
• Conduct and coordinate research within NTU and collaborating partners in line with its research strategy under the supervision of the PIs and collaborators
• Publish research outcomes in journals of international standing; Attend and present research findings and papers at academic meetings, and contribute to the external visibility of the centre.
• Draft research reports for PIs and undertake specific roles and management functions as may be reasonably required by the PIs.

Job Requirements:

• PhD in Optical Engineering, Biomedical Engineering, Mechanical Engineering, Precision Engineering, Electronics Engineering, Physics or a similar discipline with optics and instrumentation background
• Previous experience in high-resolution imaging, bioimaging, optical measurements, metrology, spectroscopy, hyperspectral imaging (HSI), and machine vision are desirable
• Expertise in handling and maintenance of high power CW and pulsed laser systems, spectrometers, high-resolution cameras, and delicate optical components are desirable
• Possess good programming, optical instrumentation, automation and image processing skills (e.g. C++, LabVIEW, Zemax, OSLO, TracePro, MATLAB, Python, ImageJ)
• Proven publication track record would be an advantage

We regret that only shortlisted candidates will be notified.