The New Product Introduction (NPI) process engineer will provide Dermcut Medical Pte Ltd with technical support and operating knowledge for our medical device operation. This role will conduct critical engineering functions such as product validation, troubleshooting, identifying and implementing process improvements.

The engineer will work closely with project manager and is in charge of taking the prototype from pilot scale into full scale manufacturing in support of commercial efforts. This position will focus on developing various processes and implementing those to support mass production.

Primary Responsibilities

• Establish processes based on product specifications.
• Develop control plans, gage repeatability & reproducibility, test method verification & validation, and pFMEA.
• Identify areas of process improvement to reduce and minimize process related nonconformance incidents and to maximize efficiency of the process.
• Co-ordinate the generation of dossier including but not limited to design files, technical files and project files to include design outputs, shelf-life studies, biocompatibility, sterilisation, risk analysis, validation master plans, IQ's, OQ's, PQ's and test regimes.
• Responsible for screening and optimization of process parameters to achieve robust and stable processes and maximize yields, efficiencies and process capabilities.
• Perform other related duties and responsibilities as assigned.

Education / Experience Requirements

• Bachelor’s degree in process engineering or similar qualification.
• A minimum of 2 years’ experience in the medical device industry.
• A strong understanding of validation strategy (IQ/OQ/PQ), support protocols and reports.
• Experience in root cause analysis of technical discrepancies/abnormalities.
• Familiar with FDA documentation requirements, ISO 13485 quality management system, lean manufacturing, and good manufacturing practice.
• Experience with SolidWorks and Microsoft Project preferred.

Job Description & Requirements

Responsibilities

• Coordination of Mechanical,Electrical, P&S design and installation.
• Ensure all works are carry out accordingly to drawings, specification, and compliance to authorities’ requirements.
• Site coordination and manage M&E personnel on work progress, drawings,material, samples, method statement submission and approval, to ensure quality and timely completion.
• Manage and Coordinate SWC.
• Preparation of CSD & SEM or CCSM drawings.
• Monitoring of construction installation, field coordination and provide necessary problem solving.
• Carry out testing requirement, inspection with consultants.
• Conduct T&C and Handover to Client.
• Proper documentation of all test report, equipment records and As-built drawings.
• Supervision of workers and sub-contractor to ensure safety and compliance of work on site.
• Adhere to construction procedures and safe work practices and ensure that works are executed within an acceptable standard of workmanship.
• Other duties as assigned.

Requirements

• Minimum 5 years of engineering experience with Recognized Degree in relevant field.
• Minimum 3 years of supervision experience of E&M work in construction site for projects of similar scale and complexity.

Benefits:

• Entry level welcome and training provided
• Upon completion of 12 months contract, candidate will be entitled to 1 month bonus

Working Days and Timing (rostered):

• 5 days work week: Monday to Friday 8:30am - 6pm
• 5.5 days work week: Monday to Friday (8.30am to 5:30pm) & Saturday (8.30am to 12.30pm)

Job Description:

This is a contract role for a Customer Service located in ALPS Ave. Our client, one of the largest and most trusted global shipping and logistics companies, ships and tracks domestic and international deliveries. You will be responsible for interacting with customers through phone, email, chat, or in person to provide information about products or services, take orders, handle returns, and resolve complaints. It requires listening to customer concerns, investigating issues, and proposing timely and satisfactory solutions. Developing a thorough understanding of the company's products or services is essential to provide accurate information. Additionally, processing customer orders, entering them into the system, and ensuring timely delivery are key responsibilities. Using computer systems to access customer information, process orders, and respond to inquiries is also a vital part of the job.

REQUIREMENTS:

• Entry level are welcome
• No experiences required

Job Description:

• Developing and optimizing thin film processes, such as Physical Vapour Deposition (PVD) and e-Beam Evaporation for Micro-Electro-Mechanical-Systems (MEMS), Wide-Band-Gap (WBG) and Photonics applications.
• Thin film property characterization and process issue troubleshooting.
• Develop film defect reduction and yield improvement strategies.
• Act as a subject matter expert and resource for colleagues in integration teams.
• Work with Fab team in establishing statistical process control for thin film module.
• Generate and present reports to both internal and external customers.

Job Requirements:

• Bachelors/Masters in Materials Science and Engineering, Physics, Electrical Engineering, or closely related fields are welcome to apply.
• 3+ years direct industry experience in PVD and evaporation is preferred.
• Good understanding of thin film deposition techniques, defect reduction methodologies, yield improvement and thin film property characterization is desired.
• Understanding of thin film tool hardware, especially PVD and evaporation, is advantageous.
• Knowledge and prior hands-on experience on basic process characterization techniques such as SEM/TEM, EDX, SIMS, FTIR, XPS, ellipsometry is advantageous.
• Good understanding of thin film deposition techniques, defect reduction methodologies, yield improvement and thin film property characterization is desired.
• Possess good interpersonal and oral/written communication skills, with ability to deliver clear and concise messages to both internal and external stakeholders.

Job Description:

• Developing and optimizing thin film processes, such as Physical Vapour Deposition (PVD) and e-Beam Evaporation for Micro-Electro-Mechanical-Systems (MEMS), Wide-Band-Gap (WBG) and Photonics applications.
• Thin film property characterization and process issue troubleshooting.
• Develop film defect reduction and yield improvement strategies.
• Act as a subject matter expert and resource for colleagues in integration teams.
• Work with Fab team in establishing statistical process control for thin film module.
• Generate and present reports to both internal and external customers.

Job Requirements:

• Bachelors/Masters in Materials Science and Engineering, Physics, Electrical Engineering, or closely related fields are welcome to apply.
• 3+ years direct industry experience in PVD and evaporation is preferred.
• Good understanding of thin film deposition techniques, defect reduction methodologies, yield improvement and thin film property characterization is desired.
• Understanding of thin film tool hardware, especially PVD and evaporation, is advantageous.
• Knowledge and prior hands-on experience on basic process characterization techniques such as SEM/TEM, EDX, SIMS, FTIR, XPS, ellipsometry is advantageous.
• Good understanding of thin film deposition techniques, defect reduction methodologies, yield improvement and thin film property characterization is desired.
• Possess good interpersonal and oral/written communication skills, with ability to deliver clear and concise messages to both internal and external stakeholders.

As the Research Engineer (Equipment/Operations), you are directly involved in tool installation activities for semiconductor process tools. You would need to work proactively to coordinate with the contractor on the ground for the execution and take corrective and preventive actions of lessons learned, due diligently to prevent reoccurrence. You are responsible for performing utilities turn-on after installation is completed. You must perform the activities per ASTAR site procedure and safety policies to ensure all tool-install-related activities are completed, meeting safety, quality, schedule and budget requirements. You will also be required to perform other activities such as operations for the different semiconductor modules (Diffusion, Litho, Dry/Wet Etch, Thin Film, Implant, etc).

Responsibilities:

• Coordinate with all tool-install base contractors to execute equipment hookup for new tools, to meet the high-quality standards, dynamic schedule, and forecasted budget.
• Coordinate with the Project owner (NGTC/APM) to facilitate utility release as per the planned schedule and update tool release status timely
• Follow all safety and environmental procedures to ensure compliance with EHS-related regulations, risk assessment, safe work procedures, and permit-to-work system.
• Play an active role in safety, actively participating in safety discussions and safe work practices.
• Establish regular area walks to identify opportunities for improved safety, cleanliness, housekeeping and efficiency
• Establish regular, working interaction with peers as well as vendors in tool installation & facilitation, communicating clearly and respectfully all relevant information.
• Keep the reporting officer informed regarding the progress of assigned work and any abnormalities observed in your area.
• Demonstrate ability to understand drawing and highlighting discrepancies
• Follow area-specific procedures and documentation
• Prioritize work tasks to meet schedule and expectations, minimum guidance
• Perform tool tool-relativities and cleanroom systems troubleshooting during the hookup phase
• To perform equipment trouble-shooting of the equipments in NGTC when the need arises
• To perform utility-on after installation completion and to work closely with LCAM for complete closure
• To perform tests balancing of exhaust for new tools whenever necessary
• To perform measures for tool consumption during the hookup phase and to work closely with LCAM
• Use methods to organize, calculate, and display data accurately for utility and flowrate measurement
• Perform site activities in accordance to the Discipline

Requirements:

• Degree/Diploma in Mechanical/Electrical/Chemical engineering or equivalent
• Semiconductor experience (Equipment & Process)
• Facilities field or Wafer Fab Manufacturing equipment background will be an advantage.
• AutoCAD

Summary

This position is accountable for preparing the detailed Construction plans in accordance with the JGCAP’s company policies as the key person under the direction by JGCAP’s Site In-charge/ Project Manager and coordinating all construction activities on site among all JGCAP’s disciplines including subcontractors using his technical experiences and construction know-how and ensuring the completion of the work on schedule.

The detail plans as described above are as follows:

• Execution formation with the direction by JGCAP’s Site In-charge/ Project Manager.
• Outline of the Construction & sequence of work.
• Temporary facilities plan (If require) and subcontracting Plan.
• Manpower mobilization plan.
• Construction equipment mobilization plan.
• Work closely with the project scheduler on construction schedule and progress reporting.
• Constructability studies and plans, coordinate with Project Engineers and other related discipline as and when necessary.
• Scaffolding plan.
• Reflect the constructability plans in the inquiry for subcontracting.
• Preparation of documents such as specifications, procedures, manuals and etc.
• Erection plan of extra heavy equipment, inclusive of haulage plan.
• HSSE work control plan including rules and promotion plan together with JGCAP’s Site HSSE personnel.
• Coordinate with Project team of vendor specialists for work which need vendor specialist support.

Duties & Responsibilities:

• Initiate the subcontractors sourcing, inquiry package issuing, work scope clarification, sub-contractors evaluation & selection, cost negotiation and PO issuance.
• Work scope clarification & confirmation, BQ verification and construction direct & indirect cost estimation.
• Initiate Project’s Kick off meeting with the selected subcontractor and coordinating with selected subcontractors to ensure they are in line with company or project strategies and planning. Discussing and clarifying the detail of scope of work, execution plan, commercial issue and technical issue to minimize potential future conflict.
• Carry out constructability studies, construction activities planning and execution plan for the job.
• Coordinating with all engineering disciplines to ensure design, cost and client’s requirement can be achieved.
• Handling of issued drawings or field change sheet to ensure latest drawings to be applied.
• Work closely with the team member and subcontractor to prepare all the MSRA required for the project.
• Working closely with scheduler, subcontractors and clients to plan ahead and schedule critical work paths in order to avoid delays or obstructions on mechanical completion.
• Day to day management of the site, including supervising and monitoring the work progress, site labour force and any work of subcontractors.
• Overseeing quality control and health and safety matters on site.
• Maintain knowledge on all contract terms and legal requirements for project to avoid any delay in projects.
• Identify and resolve all technical issues in Construction process.
• Liaising with clients and company project team, including attending regular meeting and submitting reports to keep them informed of progress and construction issues.
• Liaising with any vendors, consultant, supervisors, subcontractors and the general workforce involved in the project.
• Assist the JGCAP’s Site In-charge/ Project Manager to monitor and manage the overall construction cost, including subcontractors’ progress billing, construction expenses and cost of variation order.
• Prepare and submit the weekly and monthly progress/construction reports to management.

Education Qualifications & Other Requirements:

• Degree in Mechanical engineering or equivalent.
• Over 3 years’ relevant experience in construction management field.
• Experience in oil and gas or chemical projects.
• Knowledge in construction planning.
• Knowledge and experience in sub-contracting work.
• Proficient in MS Office, MS Powerpoint and schedule reporting.
• Clear awareness of construction management tools and method of execution.
• Familiar with Construction Practices.

Interested parties, please send in your detailed resume.

Duties & Responsibilities

• Prepare, interpret and evaluate stress/vibration result.
• Review piping layout and piping information.
• Review piping engineering progress against approved schedule.
• Evaluating changes and taking corrective action when required.
• Provide technical guidance, executing and coordinating the above responsibilities to ensure timely completion and meets project schedule and budget.
• Performs other tasks that may be assigned or designated to him/her by his/her superior.

Requirements

• Bachelor’s degree in Mechanical Engineering.
• Minimum 10 years in the field of piping design involving detailed design, stress evaluation, production work, 3D model review, and construction engineering support.
• Good knowledge of Caesar II.
• Interpretation of stress/ vibration analysis report.
• Basic knowledge of AutoCAD.
• Basic knowledge of 3D model review through Naviswork or SPR.
• Strong analytical and reasoning abilities.
• Good interpersonal and communication skills.

Benefits:

• Entry level welcome and training provided
• Upon completion of 12 months contract, candidate will be entitled to 1 month bonus

Working Days and Timing (rostered):

• 5 days work week: Monday to Friday 8:30am - 6pm
• 5.5 days work week: Monday to Friday (8.30am to 5:30pm) & Saturday (8.30am to 12.30pm)

Job Description:

This is a contract role for a Customer Service located in ALPS Ave. Our client, one of the largest and most trusted global shipping and logistics companies, ships and tracks domestic and international deliveries. You will be responsible for interacting with customers through phone, email, chat, or in person to provide information about products or services, take orders, handle returns, and resolve complaints. It requires listening to customer concerns, investigating issues, and proposing timely and satisfactory solutions. Developing a thorough understanding of the company's products or services is essential to provide accurate information. Additionally, processing customer orders, entering them into the system, and ensuring timely delivery are key responsibilities. Using computer systems to access customer information, process orders, and respond to inquiries is also a vital part of the job.

REQUIREMENTS:

• Entry level are welcome
• No experiences required

As a University of Applied Learning, SIT works closely with industry in our research pursuits. Our research staff will have the opportunity to be equipped with applied research skill sets that are relevant to industry demands while working on research projects in SIT.

The primary responsibility of this role is to deliver on an industry innovation research project where you will be part of the research team to perform modelling and real-time simulation of electric vessel’s onboard microgrid and propulsion system.

Key Responsibilities

• Participate in and manage the research project with Principal Investigator (PI), Co-PI and the research team members to develop onboard microgrid simulation models with energy management systems as well as to plan and test the relevant hardware systems.
• Work with research team to deliver the work scope and undertake these responsibilities in the project.
  Work Responsibilities:
  1. Develop detailed electrical models of the microgrid (power system) of various e-vessels based on the concept design in a simulation environment such as Matlab/Simulink.
  2. Design and develop an intelligent energy management system for the e-vessel microgrid for coordinated control of multiple energy sources considering cost, carbon, and operation constraints.
  3. Operate the simulated electrical model with EMS controller to perform simulations for various cases to demonstrate performance and recommend improvements at unit, sub-system and whole system level.
  4. Implement and carry out simulation studies for onboard microgrid and connection to shore charging infrastructure.
• Recommend efficient and reliable power system architecture(s) with other merits of high-density and light-weight.
• Test the relevant power electronics and drives system hardware and troubleshoot the challenging problems.
• Carry out Risk Assessment, and ensure compliance with Work, Safety and Health Regulations.
• Coordinate procurement and liaison with vendors/suppliers.
• Work independently, as well as within a team, to ensure proper operation and maintenance of equipment and assist in laboratory management.
• Mentor students involved in the research project
• For those hired at senior levels, management responsibilities may be included

Job Requirements

• Have a Master’s or PhD’s degree in Electrical Engineering or equivalent from a recognized University. Major in Power Engineering will be advantageous.
• Minimum 3 years of relevant experience in modelling and energy management algorithm development using MATLAB/Simulink for microgrid applications.
• Knowledge of power electronics, drives, and control is highly preferred. Hardware testing experience will be advantageous.
• Have experience and commitment to participate in project meetings.
• Self-motivated team player and good project management skills.
• Excellent writing, communication, presentation, and interpersonal skills.

Key Competencies

• Able to build and maintain strong working relationships with people within and external to the university.
• Self-directed learner who believes in continuous learning and development
• Proficient in technical writing and presentation
• Possess strong analytical and critical thinking skills
• Show strong initiative and take ownership of work

About HOYA Surgical Optics (HSO)

HOYA Surgical Optics (HSO) is the globally leading Preloaded Intraocular Lens (IOL) focused company that provides technologies and solutions that exceed expectations, enabling ophthalmic surgeons to focus on restoring sight. We are dedicated to improving the vision and quality of life for millions of people suffering from cataract, and helping them celebrate life visually.

HSO empowers cataract surgeons all over the world with innovative ophthalmic devices and services, with an attention to detail that helps them achieve better surgical outcomes and better practice results. Our commitment to delivering these results is grounded upon a quality management system that is continuously improving to meet changing global regulatory requirements and our entrepreneurial drive to be the brand of first choice.

At HSO, People is the key factor to our success. We aim to create a conducive work environment for our employees around the globe, and to promote an inclusive culture based on our core values – Excellence, Passion, Innovative, Collaboration, and Accountability.

HSO way of working

In fulfilling our roles, we are

• Accountable for our own capabilities and development,
• Focused on delivering results without excuses, and
• Alive to the sensitivities, risk, and impact we have on others and work in a way that helps others do their work effectively.
• We are looking for people who
• See beyond themselves and are impact-focused,
• Consider the needs, challenges, and objectives of every person with whom they interact, and
• Exhibit positive reinforcement to help others succeed.

About the role

Works closely with and have impact on: Global Research & Development (R&D), Post Market Surveillance, and Global Regulatory Affairs (RA) Teams

Reports to: Senior Manager QA R&D

Function: Global QA & Compliance Organization

Work Location/Site: Singapore / Global Headquarters

Role Overview

This position is responsible to ensure that products meet quality goals and regulatory requirements, including but not limited to FDA Regulations, ISO 13485, EU MDR requirements, and Risk Management per ISO 14971 and maintain compliance of the Quality Management System (QMS).

Duties and Responsibilities

• Partner with R&D teams in the USA, Japan, and Singapore to ensure that design control is completed in accordance with procedures, WI, regulatory requirements, and assure that required outputs have been completed
• Execute risk management for devices, processes, and provide the assessment results from product development through to the launch
• Maintain and update risk management files with Global R&D/Manufacturing Engineering (ME) teams to support product development (Risk Management Plans, Risk Control Log, Benefit Risk Assessment Risk Management Report, xFMEA, etc.), and act as the Risk Management expert
• Assist in the review and approval of design development plans, verification and validation protocols, reports, master V&V plans and reports, and design transfer
• Review and approve design verification test protocols, reports and data from a logical point of view (Compliance, rationale, objectiveness and statistics)
• Partner within Quality and R&D to ensure design control documentation (Risk Management, Traceability/Linkages) & design change control requirements are met
• Review and approve biocompatibility protocols and reports
• Ensure compliance of IQ, OQ, tests method validation, Standard Operating procedures and work instructions regarding product development
• Maintain compliance to QMS procedures of the R&D Singapore site, and support the Singapore R&D Site - QA
• Support External audits by competent authorities and notified bodies
• Support internal audits at the local site, and other sites as required
• Review and approve other quality documents (e.g., IQ, OQ, PQ, WI, etc) within areas of responsibility
• Propose and execute quality/process improvements. Write/review policies/ processes/ procedures and related documents
• Manage and monitor the progress of the calibration and maintenance of testing equipment. Ensure calibration or maintenance records satisfy regulatory and QMS requirements (act as Equipment Control Administrator in Singapore)
• Participate in development projects and change control request meetings to support the resolution of engineering issues
• Collaborate with the post-market surveillance team and complaints investigation teams to maintain risk management process throughout a product’s lifecycle
• Provide support for other quality activities and improvement initiatives, quality data collection and trending, CAPAs, change controls, training, etc.
• Support initiatives as identified by management to support QMS and other regulatory requirements in Singapore

Requirements

Experience

• At least 4+ years of Industry experience working as QE Engineer in Medical Device/ Pharmaceutical product or optical engineering business field
• Experience in test method validation
• Experience in Design control, Design Transfer, Design and Development Process
• Demonstrated knowledge of Risk Management (ISO14971), Design control, Design and Development Process and Quality System (any one of ISO13485).
• Understanding and Knowledge of biocompatibility studies
• Experience in coordination and planning of complex activities and ability to identify and resolve complex problems through effective use of technical and interpersonal skills
• Product development experience (e.g. approaches for definition of requirements and specification setting for verification and validation). Practical experience in design control and risk management
• Effective use of oral and written communication skills to clearly communicate the quality position, and the actions necessary to resolve issues
• Interpersonal, team, leadership, and negotiation skills to handle conflicting priorities
• Strong oral and written communication skills, excellent interpersonal and cross-cultural skills required
• Capable of clearly presenting and justifying quality requirements to management
• Accreditation by a professional body is highly desirable. Examples include American Society for Quality (ASQ) Certified Quality Auditor (CQA) or Certified Quality Engineer (CQE)

Skills/Accreditations

• Smooth communication ability
• Business software skills (e.g. Word, Excel and Power point)
• Experience with statistical software such as Minitab
• Voluntary working attitude with a creative idea
• Passionate working attitude to pursue a goal with patience.
• Flexibility for changes

Academic Qualifications

• A bachelor’s degree or higher in Chemical, Bioengineering, Mechanical, Optical Engineering or related fields.

Travel requirements

• 2-3 international travel annually mainly Thailand.

By submitting your application, you consent to HOYA Group collecting, disclosing, and retaining your personal data for employment assessment and verification purposes.

If you are shortlisted, we will contact you within three weeks of your application. Thank you for your application and understanding.

Fabrica AI is reinventing how robots are developed. Currently novel robots take 5-20 years. We are building a design automation platform to bring it down to a month, and have already demonstrated significant progress by developing tile grouting robots in record time. Robotics simulation and reinforcement learning has been advancing a lot making it 1000x cheaper to train robots compared to 5 years ago, and as Jensen Huang said at Nvidia GTC 2024, "the ChatGPT moment for robotics may be just around the corner." A couple other companies are building on the same paradigm shift but we are the only ones using it to automate hardware design, not just software.

Building robots and a design automation platform together brings great synergy - the platform helps us develop robots faster than anyone else and the robots allow us to gather data and do experiments at scale. Data gathering can be done through partnerships with other robotics companies, but doing experiments is crucial for grounding the platform in reality and ensuring its usefulness. The grouting robots are already deploying daily at construction sites and bringing value to clients. We are currently negotiating sales worth around 500k USD. With manufacturing cost multiple times lower than companies using a traditional robotic arm, our robots have an ROI in weeks. Our robot is also small and simple to use, operating from a single button without the need to upload floorplans or do any complex setup. Soon we would be expanding into other simple and valuable robots for the construction industry.

We’ve raised over 2.5m USD from Hoxton Ventures, Credo Ventures, our Professor from Cambridge University, Woh Hup, and the owner of BHCC (listed construction company). We’ve 2500sqft of space in Singapore where we have over 20 team members, and 1200sqft of space in Czechia where we have our software team.

Jakub Suchanek (CEO) has an engineering degree from the University of Cambridge and experience working on self-driving cars at Wayve and machine learning at Granta Innovation and Wacker. He is a worldwide winner of NASA SpaceApps and has won bronze medals in International Olympiads in Informatics and Physics.

Ronald Luc (CTO) earned a degree in Math and Computer Science from Masaryk University, where he was a teaching assistant, and supervised several deep learning theses. He has years of industry experience in both machine learning and self driving cars. With Jakub he won TechFest Munich, one of the EU’s top hackathons; and represented Czechia at the International Olympiad in Informatics.

Keefe Wayne Teo (COO & CFO), a University of Cambridge engineering graduate, served as president of Hackbridge.io, promoting entrepreneurship in tech. He has 100+ citations in research journals and four papers on sustainable energy. He previously worked at Entrepreneur First and has business development experience from other companies.

Website: https://www.fabrica.ai/ (and various press releases, awards, etc.)
Latest Grouting Robot Demo: https://www.youtube.com/watch?v=AVWjmaMuYM0

Fabricator videos

https://www.youtube.com/watch?v=4aoQ4QaEOPQ

https://www.youtube.com/watch?v=xnENP7zWzEM

https://youtu.be/qXpkFeEidac

https://www.youtube.com/watch?v=5SBiEBLMQ9k

Your internship would revolve around real-world industry deployments taking us from a TRL of 7 to 9. You may be remunerated with a combination of salary and share options. As an SGInnovate partner company, we can offer a monthly S$3000 SGD in stipend under the SGI Summation program for undergraduates, more for masters, PhD students. The following tracks are available, you would probably be doing a couple of them up to your preference, with examples of what has been done by previous interns:

Your role will include (*you don’t have to be proficient for all of them*):

Core responsibilities:

• PCB, electronics design
  • Working with both hobbyist and industrial microcontrollers, single board computers, motor drivers etc.
  • Integrating motor systems of different types (DC, BLDC, with encoder feedback…), sensor modules etc.
  • PCB design
• Embedded programming

Possible additional responsibilities:

• Testing our robot on construction sites
• Managing external PCB production
• Harness design
• Overseeing a team doing all the above

Requirements:

• Experience with electronics design and embedded software at at least one industrial level project
• Value the direct impact on the product and proximity to clients at a startup and the growth potential of a startup more than having a stable job at a reputable company
• Willing to work without a very well defined job scope and willing to adapt to changes week on week
• Ability to think of metrics to measure progress and deciding based on back on the envelope calculations
• Keenness to do more than is expected, impact driven, past side projects
• Excited about robotics and similar technical areas and exploring them in work and other projects
• Growth mindset driven

Our development process is very iterative and agile. Thus your role/tasks is/are likely to evolve over time. You would play a significant part in deciding how your work would contribute to our overall goals. Besides, a lot of testing has to be done on a construction site. If you like this process, you’d be a good fit for us. Check out the link above for more information, and send your CV to [email protected]

Roles and Responsibility:

• Preparation of Piping Material Specification (line classes), specifications/requisitions for bulk and special piping components, vendor quotation evaluations and verifications of vendor documents and piping material take-off prepared by engineers for compliance to project standards or specifications, applicable codes, contract requirements, quality standards and accepted engineering and construction practices.
• To calculate/validate pipe wall thickness, branch reinforcement etc.
• To prepare line index, Material summary (BM/BQ).
• To carry out engineering support work during the construction phase of the project.
• Performs other tasks that may be assigned or designated to him/her by his/her superior.

Requirements:

• Minimum of Ten (10) years in the field of piping engineering involving material, design, production work, 3D model review, stress and construction engineering support.
• Bachelor’s Degree in Mechanical Engineering or equivalent combination of education and experience.
• Good knowledge and experience of ASME, ASTM, BS and other relevant standards.
• Basic knowledge of AutoCAD/AP3D/S3D.
• Basic knowledge of 3D Model review through Navisworks or SPR.
• Strong analytical and reasoning abilities.
• Good leadership skills.
• Good interpersonal and communication skill.

Role Description:

• Responsible for semiconductor fab automation with Autonomous Mobile Robot (AMR) & SECS/GEM
• MES knwolegeable and work with vendors to evaluate and enable communication between MES, Tool and AMR.
• Responsible for proposing/developing/implementing/maintaining IOT automation systems collecting/cleaning/restructuring equipment data and storage in data management system
• Maintenance of AMR and existing system performing periodic data integrity checks, create automated failure alerts, perform timely fixes when necessary and continuously improve the automation frameworks with new innovative features\
• Create Web UI for admin/user required view & operation. Create automated periodic insights/analytics/reports/visualisation/alerts operations required for timely decision-making processes.

Job Requirements

• Degree in Computer Science, Engineering or relevant field
• Ability to work independently and team player to deliver result in fast paced and collaborative environment
• Preferable with 1-3 experience in various semiconductor process module/knowledge, equipment engineering or digital transformation, specifically in SECS/GEM Automation.
• Knowledge in communication systems and network protocols used between tool and factory automation (SECS/GEM knowledge & semiconductor/manufacturing environment)
• Knowledge in variety of operating system (OS) used for automation (e.g SECS/GEM, php, js, sql). Other technical skills such as AMHS, vb, xml will be a plus/
• Preferable to have experience in data mining, database engineering, software development

Role Description:

• Responsible for semiconductor fab automation with Autonomous Mobile Robot (AMR) & SECS/GEM
• MES knwolegeable and work with vendors to evaluate and enable communication between MES, Tool and AMR.
• Responsible for proposing/developing/implementing/maintaining IOT automation systems collecting/cleaning/restructuring equipment data and storage in data management system
• Maintenance of AMR and existing system performing periodic data integrity checks, create automated failure alerts, perform timely fixes when necessary and continuously improve the automation frameworks with new innovative features\
• Create Web UI for admin/user required view & operation. Create automated periodic insights/analytics/reports/visualisation/alerts operations required for timely decision-making processes.

Job Requirements

• Degree in Computer Science, Engineering or relevant field
• Ability to work independently and team player to deliver result in fast paced and collaborative environment
• Preferable with 1-3 experience in various semiconductor process module/knowledge, equipment engineering or digital transformation, specifically in SECS/GEM Automation.
• Knowledge in communication systems and network protocols used between tool and factory automation (SECS/GEM knowledge & semiconductor/manufacturing environment)
• Knowledge in variety of operating system (OS) used for automation (e.g SECS/GEM, php, js, sql). Other technical skills such as AMHS, vb, xml will be a plus/
• Preferable to have experience in data mining, database engineering, software development

Mission statement:

Lead the engineering execution of medium-size projects and ensure that all related activities are performed in accordance with Hitachi Energy policy, contractual agreements, quality standards, health, safety & environment requirements. Responsible for day-to-day designing and engineering activities aligned with schedule commitments. He / She is to possess technical knowledge and skills relating to the design of various transmission substation/Industry components, systems and equipment. To provide technical guidance to his/her project team and lead project engineering discussion.

Your responsibilities:

• You will design system while adhering to design and engineering principles of transmission substation/Industry, incorporate equipment, system, and safety features in design plans, comply with local and national safety standard and ethics that come with the design engineer role.
• You will maintain records and documents of all the work and design in accordance with unit and customer requirement.
• You will work in within the proposed schedule and budget for the project and liaise with project stakeholders with status update to them regarding the status of the work.
• You will coordinate mechanical and electrical tests on design, if required, conduct tests on equipment against fundamental design.
• You will manage department's compliance with organization’s risk management framework, review design drawings for practicability, completion timeframe and research capabilities.
• You will assist in development engineering resource planning strategy, coordinate with factory and supplier to ensure the design meet with the requirement, prepare design related calculation and issue bill of material·
• Living Hitachi Energy's core values of safety and integrity, which means taking responsibility for your own actions while caring for your colleagues and the business.

Your background:

• You hold Electrical Engineering degree or equivalent.
• Preferably with 3 years’ experiences in Electrical/Transmission Industry.
• Experience and proficient knowledge and skills in BIM - Autodesk REVIT (3D model)
• Experience in switchgear planning, design and bidding related tasks.
• Good knowledge of substations equipment, protection relays and network automation.
• Knowledge of Electrical/Transmission Utilities Industry is preferred.
• Proficiency in English language.

Summary

People at Apple don't just build products — they craft the kind of experiences that have revolutionized entire industries. The diverse collection of our people and their ideas inspire innovation in everything we do. Imagine what you could do here! The Apple Services Engineering (ASE) team builds and provides systems and infrastructure that fuel Apple's Services. These are the people who power the App Store, Apple TV, Apple Music, Apple Podcasts, Apple Books, and more. And they do it on a massive scale. They consistently exceed Apple’s high standards with high-performance solutions, delivering a diverse array of products in over 35 languages to more than 150 countries. The ASE Production Support Engineering team is looking for an Escalation Engineer for troubleshooting, tracking, and resolving technical issues. This Engineer will play a vital role in technical troubleshooting for Apple’s customers, internal business partners, and strategic partners for all of Apple’s Media Services.

Description

As a vital member of an exceptional global team, you will play a key role in Tier 4 support, addressing technical issues for customers, internal business partners, and strategic partners. Your responsibilities will include efficiently triaging issues, evaluating their impact, delving into server logs, replicating problems, capturing device logs, and methodically determining root causes. Collaboration with diverse engineering teams to prioritize and resolve issues will be a central aspect of your role. Acting as the problem manager for top issues, you'll communicate updates and estimated time of resolution to a broad audience, including senior leadership. In addition to driving issue resolutions, you will contribute to the enhancement of operational efficiency. This involves developing exceptional tools, documentation, and refining processes to elevate the quality and speed of issue handling. Furthermore, your commitment extends to participating in On-Call duties and assisting during spikes in issues or when faced with time-critical situations.

Minimum Qualifications

• Proven track record in solving problems within complex distributed applications
• Proficiency in scripting, such as Python, and server-side programming languages, such as Java.
• High logical and critical thinking skills
• Demonstrated expertise in analyzing client and server-side logs
• Strong knowledge of SQL, relational database systems, and/or distributed SQL query engines (such as Oracle and Trino)

Preferred Qualifications

• Experience with log analysis tools, such as Splunk, is a huge plus
• Experience in Charles Proxy or Wireshark and Sysdiagnose is a plus.

What you will do

1. DFT architecture exploration & evaluation for next-gen process node & package technology of MediaTek:

• Scan chain insertion & ATPG pattern generation
• Pattern validation through simulation & silicon analysis(pass/fail, shmoo, fail log, etc.)
• Diagnosis to help manufacture process improvement

2. Co-work with SoC architect, RTL designer, physical design engineer, and package engineer to define best architecture for 3D-IC:

• PPA(Performance/Power/Area) impact analysis & mitigation via DFT innovation
• Develop & integrate DFT-related RTL design modules to test chip

What you will bring

1. Master's Degree in EEE/ EE/ CE
2. Expertise in Synopsys and/or Mentor DFT tools, and HDL simulators like Synopsys VCS
3. Fluency in script language including but not limited to TCL/Perl/Python
4. Experience about MBIST with state-of-the-art SRAM structure & EDA tools is big plus
5. Skill for RTL design & integration, and physical failure analysis(PFA) will also be plus
6. Ability to think and work independently with different teams
7. Interest in understanding more details in entire design flow
8. Ability to use English for discussing technical details
9. More than 4-year industrial work experience is preferred

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

The job holders are to work with PI and the research team to process air quality data and study small-scale dispersion of airborne pollutants in urban environment.

Qualifications

One or more of (but not limited to) the following:

• Bachelor Degree in Engineering or relevant field
• Experiences of (small-scale) simulations of air pollutant dispersion, meteorology modelling, data processing
• Demonstrating as a fast learner of conducting literature study and literature summary
• Experiences of handling big data via R, Python, Matlab, etc.
• Experience with UNIX-based operating systems and bash script or similar
• Strong interests in applying machine learning models and applications to atmospheric research
• Proactive in assisting and contributing to quality scientific research publications
• Proficient in technical presentation, slide making, report writing, etc.
• Proven rounded and effective team player with strong initiative and ownership of the research project

About NSING:

As part of Nations Technologies Group, NSING was founded in 2018 in Singapore bringing high-performance semiconductor products and solutions to global semiconductor industry. Our products includes General and Secure MCU, Secure IC for TPM (Trusted Platform Module), Bluetooth Low Energy BLE and BMS (Battery Management System). When you join NSING, you will be part of a talented team in the Singapore R&D Center where we develop high performance MCU targeting for Industrial and Edge AI applications.

Your Role:

As a SoC Design Verification Engineer, you will be you would be part of a passionate team developing and deploying state-of-the-art verification methodologies in ever-increasing design complexities, from UVM, C co-simulation, to mixed-signal simulation and formal verification. You will be part of the Singapore team in developing high performance MCU chips.

• Develop detailed verification plans based on design specifications and architectural requirements.
• Create and maintain test benches for complex digital designs using System Verilog and UVM (Universal Verification Methodology).
• Write, debug, and execute test cases to verify functionality, performance, and power consumption of our SoC products.
• Collaborate with design engineers to identify, analyze, and resolve design issues.
• Conduct coverage analysis and drive verification closure to ensure all functional requirements are met.
• Mentor junior verification engineers, providing technical guidance and support.
• Continuously improve verification processes and methodologies to enhance efficiency and effectiveness.
• Participate in design and verification reviews, providing constructive feedback and recommendations.
• Stay updated with the latest industry trends and advancements in verification techniques and tools.

Your Skills and Experiences:

• Education：Bachelor's or Master's degree in Electrical Engineering, Computer Engineering, or a related field.
• Experience: 5 years+ prior industry experience of design verification including significant System Verilog and UVM usage.
• Technical skills:

-Deep knowledge of digital logic design, SOC architecture and microarchitecture

- Proficient in simulation-based verification methodologies and languages such as UVM and System Verilog

- Skilled in developing and maintaining test benches, test cases, and verification environments

- Experience across the full verification cycle from initial planning to final tape out

• Preferred skills:

- Knowledge of low-power design techniques and verification methodologies.

- Knowledge of hardware-software co-simulation mixed-signal verification techniques.

- Knowledge of gate level simulation methodologies.

Other Skills:

• Strong analytical and problem-solving skills, with a keen attention to detail.
• Excellent communication and teamwork skills, with the ability to collaborate effectively in a cross-functional environment.
• Flexibility and adaptability and demonstrates ability to manage multiple tasks and projects, prioritizing effectively to meet deadlines.

JOB DESCRIPTION

We are looking for highly-motivated and skilled programmers to join us in Biomed DAR (BII A*Star), to work on a new initiative in the development and deployment of software tools for data management support systems/biomedical data repository. Our work supports BMRC-wide research programmes and industry collaborations.

Successful candidates will work with a team of data scientists, data engineers and UI designers to program a web-application stack for automated data integrity checks, data curation, data annotation, and data imputation for structured data generated by research programmes. Successful candidates will have the opportunity to tap into a large pool of biomedical data from different disciplines and to interact with the companies/researchers to understand their real data needs.

JOB REQUIREMENT

· Minimum bachelor’s degree or diploma in the field of computer science, computer engineering, or other web programming intensive course. With expertise in at least one of the following areas: creating, maintaining, implementing APIs, front-end development, microservices architecture

· Possess minimum 2 - 3 years or more of relevant work experience.

· Ability to work independently to translate design templates and ideas into programs with efficient coding.

· Basic knowledge in data analytics and proficient in Python, Node.js, React, SQL

· Prior industry experience with engineering, financial services, healthcare is a plus.

· Able to deliver under tight schedule.

· Good team player with understanding of best practices and cybersecurity.

· Good interpersonal and communication skills.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

JOB DESCRIPTION

We are looking for highly-motivated and skilled programmers to join us in Biomed DAR (BII A*Star), to work on a new initiative in the development and deployment of software tools for data management support systems/biomedical data repository. Our work supports BMRC-wide research programmes and industry collaborations.

Successful candidates will work with a team of data scientists, data engineers and UI designers to program a web-application stack for automated data integrity checks, data curation, data annotation, and data imputation for structured data generated by research programmes. Successful candidates will have the opportunity to tap into a large pool of biomedical data from different disciplines and to interact with the companies/researchers to understand their real data needs.

JOB REQUIREMENT

· Minimum bachelor’s degree or diploma in the field of computer science, computer engineering, or other web programming intensive course. With expertise in at least one of the following areas: creating, maintaining, implementing APIs, front-end development, microservices architecture

· Possess minimum 5 years or more of relevant work experience.

· Ability to work independently to translate design templates and ideas into programs with efficient coding.

· Basic knowledge in data analytics and proficient in Python, Node.js, React, SQL

· Prior industry experience with engineering, financial services, healthcare is a plus.

· Able to deliver under tight schedule.

· Good team player with understanding of best practices and cybersecurity.

· Good interpersonal and communication skills.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

About the role

We are looking for a LEAN Programming Engineer to take a hands-on implementation approach in designing, implementing, and optimizing our theorem-proving AI system. You will contribute to research and development of critical components of our AI architecture: (a) formalizing mathematical, scientific and engineering problems into a domain knowledge model and representation, and (b) independent validation of outputs via formal verification systems. The ideal candidate will have a strong background in functional programming languages, which we believe is the foundation for developing a logical reasoning AI system. We are especially interested in candidates who have worked in developing and using automated theorem provers, formal verification systems or applications, and symbolic computation/algebra systems extensively. A strong academic or research foundation in logic systems (higher/first-order logic, etc.) will be invaluable.

KEY RESPONSIBILITIES

▪Implement and optimize algorithms for automated theorem proving, including but not limited to, proof search, term rewriting, and logical inference.

▪Incorporate advanced mathematical concepts and formal methods into the design and development process.

▪Utilize knowledge of various logic systems and frameworks such as HOL, FOL, DL, Modal Logic, and Temporal Logic in algorithm development.

▪Leverage Computer Algebra Systems (CAS) such as Mathematica, Maple, SageMath, Maxima, or SymPy for symbolic computation and algebraic manipulation.

▪Collaborate with AI researchers and mathematicians, and other engineers to write good quality code and ensure seamless integration and interoperability of different system modules.

MUST-HAVE QUALIFICATIONS

▪Masters / Ph.D. in Computer Science or Mathematics (or Advanced Master’s degree)

▪6+ years experience in at least one of Lean, Coq, Agda, or Isabelle.

DESIRABLE SKILLS

▪Strong understanding of functional programming principles and paradigms.

▪Familiarity with automated theorem proving techniques and tools.

▪Knowledge of formal methods and formal verification.

▪Understanding of category theory, type theory, or other advanced mathematical concepts.

▪Familiarity with logic theories such as Higher-Order Logic (HOL), First-Order Logic (FOL), Description Logic (DL), Modal Logic, and Temporal Logic.

▪Understanding of algebraic structures and symbolic computation.

▪Experience with AI and machine learning frameworks is highly desirable.

▪Contributions to open-source projects in the functional programming, AI, or formal verification communities.

Hummingbird Bioscience is firmly committed to Equal Employment Opportunity (EEO) and to compliance with all Singapore and US federal, state and local laws and/or guidelines that prohibit employment discrimination on the basis of age, race, color, gender, sexual orientation, gender identity, ethnicity, national origin, citizenship, religion, genetic carrier status, disability, pregnancy, childbirth or related medical conditions, marital status, protected veteran status and other protected classifications.

Rapsodo Inc. is a sports technology and analytics company that uses computer vision and machine learning to help all athletes maximize their performance. Our proprietary technology applications range from helping golfers of all abilities, including PGA professionals, to optimize their launch conditions, to allowing MLB pitchers to increase the efficiency on their breaking balls. Current partners include all 30 MLB teams, MLB, USA Baseball, Golf Digest, PGA of America, and over 1,000 NCAA athletic departments.

We are seeking a highly skilled and experienced Senior Engineer, Perception, to lead the development and implementation of our cutting-edge perception systems focused on tracking multiple objects using camera and radar technologies. This role is critical to advancing our capabilities in object detection and tracking, contributing directly to the success of our innovative projects.

Key Responsibilities

• Lead the development of advanced perception systems for real-time, multi-object tracking using camera and radar data.
• Innovate and improve camera pipeline processes to enhance image quality and system performance.
• Design and implement sensor fusion algorithms to accurately integrate data from radar and camera sensors.
• Apply deep learning and computer vision techniques to improve detection and tracking accuracy.
• Develop and optimize tracking algorithms, including Kalman filters and Multiple Hypothesis Tracking (MHT), for enhanced tracking performance.
• Collaborate with cross-functional teams to ensure seamless integration of perception systems into the overall project architecture.
• Provide technical leadership and mentorship to junior engineers, fostering a culture of innovation and excellence.
• Stay updated with the latest advancements in perception technology, applying cutting-edge research to practical applications.

Skills & Qualifications

• Advanced degree (MS or PhD) in Computer Science, Electrical Engineering, Robotics, or a related field.
• A minimum of 10 years of experience in perception system development, with a focus on multi-object tracking using camera and radar technologies.
• Deep understanding of computer vision, signal processing, and sensor fusion.
• Proven experience in designing and implementing deep learning models for computer vision applications.
• Expertise in developing and optimizing camera pipeline and tracking algorithms, such as Kalman filters and MHT.
• Proficiency in programming, particularly in C/C++.
• Exceptional analytical and problem-solving skills, with the ability to lead complex technical projects.
• Strong communication and teamwork skills, with a track record of successful cross-functional collaboration.

If you are excited about the prospect of contributing to a dynamic, innovative, and driven environment while also being able to work independently, we invite you to submit your application.

Get to Know the Team

As a Lead Engineer in our team, you would architect, implement, and roll out our next generation of Grab platform for merchants.

Get to Know the Role

The Business Platform tech family is an engineering team which is responsible for multiple key products for Grab Merchant Partners (e.g GrabMerchant App, GrabMerchant Portal). We are running on a micro-service architecture in backend and are also providing multiple frontend techniques (e.g. IOS, ADR, Flutter, Web) for our end users (e.g. Merchants, to-B partners) across 7 countries. We are aiming to provide a high quality, stable, and efficient platform for merchants, and extend our platform to support offline transactions for merchants.

You are expected to understand the requirements from different partners, and work with the team to design and improve the system architecture which could adapt to multiple business flows, and also serve high throughput (thousands of QPS) at millisecond latencies. You will report to the Senior Engineering Manager and be based onsite in our Singapore One North Office.

The Critical Tasks You Will Perform

• Develop APIs, interfaces, and database schemas to ensure scalability, maintainability, and performance across the Business services domain.
• Design, implement, instrument, and deploy available services with tight Service level agreements, and champion for operational excellence across projects.
• Collaborate with partners across teams and roles, to resolve ambiguous, multi dimensional business, legal, and product needs to ensure Business Platform architectures are not just performant and usable, but also compliant.
• Lead architecture reviews, code reviews, design reviews, postmortems, and improve for engineering best practices across teams and tech families.
• Identify process gaps and establish engineering processes — project management, collaboration, code quality.
• Mentor and be a role model for junior engineers.
• Participate in interview loops to help Grab continue hiring top industry talent.

Qualifications

What Essential Skills You Will Need

• 7+ years of relevant experience.
• Prior experience designing, implementing and maintaining critical backend services with tight SLAs, at scale.
• Proficient in at least one programming language for backend services Go, Java or C++.
• Knowledge in distributed systems design and internals.
• Prior experience with any / all of Kafka, ElasticSearch, Redis, MySql, Aurora, and managed cloud services (specifically, AWS and Azure).
• Experience approaching a problem from different angles, analyzing pros and cons of different solutions.
• Strong written and verbal communication skills in English.