Job Responsibilites

• Prepare Master Program and update progress monthly.
• Prepare Progress forecast of rolling programs and update of resources.
• Resolve any instrumentation issues & recording.
• Coordinate with services department about diversion work and schedule.
• Ensure overall site progress are updated according to schedule.
• Prepare monthly progress report for client/consultants.
• Assist Project Manager in the preparation and submission of verified work done to Quantity Surveyor.
• Any other adhoc duties as assigned by management.

Job Requirements

• Possess a Degree Civil Engineering and above or equivalent.
• At least 5 years of experience in construction planning and programme coordination for railway projects.
• Computer literate with proficiency in planning software such as Microsoft Project, AutoCAD, P6 Primavera.
• Experience in LTA Projects will be advantage.
• Willing to be based at project site office and work 5.5 days.

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

Responsibilities:

• The candidate shall carry out Outline and Detailed Mechanical Designs which are cost-effective and meet the requirements of the client’s specifications, and which can be purchased, installed and commissioned effectively.
• The candidate shall produce and check all design deliverables, including Design Specifications, Schedules, Drawings, and Calculations, and must have a good knowledge of CAD and BIM design.
• The candidate shall review clients, or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• Challenge client asset standards where a clear opportunity exists to use an alternative, cost effective process or product without reducing the overall outcome.
• The candidate shall carry out tender bid analysis for various items of plant.
• The candidate shall complete deliverables on time and to budget and, where necessary, manage the deliverables of others to ensure deliverables dates and budgets are maintained.
• The candidate shall manage/monitor the work of others in the organisation or project team as necessary, including checking and/or reviewing their work.
• The candidate shall prepare fee estimates, design programme and liaison with clients to agree project deliverables.
• The candidate shall liaise with other disciplines within the organisation or the project team to ensure that all design elements are fully integrated.
• The candidate shall carry out quality control review of design calculations, General Arrangement Drawings, 3D models and Piping & Instrumentation Diagrams, TOTEX and CAPEX and preparing technical mechanical specification sections.
• The candidate shall carry out subcontractor or third-party design reviews until these are accepted.
• The candidate shall ensure that standard practices are utilised wherever possible.
• The candidate shall ensure provide services which focus on customer satisfaction.
• The candidate shall ensure that the design fully considers all health and safety requirements, including, but not limited to, CDM 2015 regulations.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.
• The candidate shall ensure that designs take account of sustainability and environmental issues.

Preferred Qualifications

• Degree in Mechanical Engineering.
• The Candidate shall have about 3 years of experience in mechanical design works, preferably with contractor experience.
• Experience in water and/or wastewater treatment processes and relevant mechanical design criteria will be an advantage.
• General experience of other discipline criteria associated with water and/or wastewater treatment including civil, process, EICA and project management in other discipline criteria associated with water and/or wastewater treatment, including civil, process, EICA and project management, will be an advantage.
• General understanding of client regulatory environments.
• Budget management experience will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Primary Responsibilities:

• The candidate shall review clients, design engineers and/or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle from front end engineering design (FEED) through to detailed design, technical assurance, testing & commissioning and final handover.
• The candidate shall produce design layouts which are cost effective, meet the requirements of the specification and which can be constructed and commissioned effectively.
• Ensure that standard practices are utilised wherever possible.
• Provide estimates and feedback for proposals department.
• The candidate shall undertake outline and detailed designs and specifications for electrical, instrumentation and control works.
• The candidate shall provide day-to-day technical input as part of a team of engineers.
• The candidate shall ensure that the design output is completed in accordance with the agreed scope of work, timescales, and budgets.
• The candidate shall liaise with other disciplines within the organisation or the project team to fully integrate all design elements.
• The candidate shall provide written reports of system options.
• The candidate shall write specifications for electrical systems.
• The candidate shall prepare calculations and technical/equipment specification documentation.
• The candidate shall monitor the installation of designed equipment/systems to ensure compliance with design specifications and safety codes.
• The candidate shall have good knowledge of electrical design (LV and HV systems), motor control centres/switchgear, electrical installations and systems within industrial/process environment, HAZOP assessments, DSEAR/ATEX installation practice, production of SLD/BCD’s, earthing and bonding and familiarity with current UK design standards, including industry-specific standards and working practices.
• The candidate shall have proficiency in designing appropriate digital analysis packages and electrical design software such as Trimble/Amtech. Also, able to write and review technical documentation (technical specifications, control philosophies, URS)
• The candidate shall work to the procedures and processes to ensure the continuing development of the department.
• The candidate shall ensure designs take account of environmental issues.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.

Preferred Qualifications

• Degree in Electrical Engineering.
• The Candidate shall have about 3 years of experience in electrical design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.
• Ability to present technical proposals clearly, confidently and convincingly.
• Able to work independently in producing the project deliverables to meet project timeline.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Responsible for civil and steel structures scopes for building construction works.

- Study tender / construction drawings, specifications, contracts scope of works to understand project requirements.

- Plan, schedule work sequences, prepare Microsoft Project for all task and micro-schedule form throughout the project.

- Perform site inspection and ensure that the work is carried out based on the project specification and construction drawing, consultant, and authority requirement.

- Liaise and coordinate with consultants, client, main contractor, other contractor and authority.

- Provide guidance to supervisors in relation to construction works, ensure progress according to schedule.

- Ensure project is executed according to micro-schedule and timeline.

- Resolve all engineering, technical and project queries from time to time.

- Prepare a report and method statement whenever necessary.

- Prepare progress report, handover report, meeting minutes, TOP/CSC documentation, and other requirement request by client and authority.

- Any other ad-hoc duties assigned related to project

Requirements:

- Candidate must possess at least Bachelor's Degree/Post Graduate Diploma/Professional Degree in Civil / Structural or equivalent.

- Candidate must possesses Civil, Architectural, Steel Structures and/or related experience.

- At least 3 Year(s) of working experience in the related field is required for this position.

- Required Skill(s): Autocad, Microsoft Office, Microsoft Project.

- Able to work on Saturday.

Are you up for the challenging next step in your career? Stolthaven’s Customer Service department is looking for a Customer Service Manager who will oversee the division of work to the Customer Service Representatives. Manage, monitor, and improve the performance of Customer Service. Ensure the CS department meets organizational goals and expectations. Ensures that all activities are consistently executed with SHVN's existing Quality Management System.

Key Responsibilities

• Oversee the division of work to the Customer Service Representatives.
• Manage, monitor, and improve the performance of the Customer Service Team.
• Represent and develop processes within the team that improve customer satisfaction, customer relationships and business execution accuracy.
• Improve customer service experience and facilitate organic growth.
• Oversees the order acceptance process and communicates with internal departments if escalation is needed.
• Participates in the order acceptance process and communicates with the Operation Manager/ supervisors in a timely and accurate manner.
• Maintain an orderly workflow according to priorities.
• Write and conduct formal performance appraisals and participate in various personnel actions, including hiring, training, discipline, and termination.
• Analyze statistics and compile accurate reports.
• Take ownership of customers issues and follow problems through to resolution.
• Mentor and develop customer service representatives and nurture an environment where they can excel through encouragement and empowerment.
• Accompany customer visits as required.
• Update CRM with visit reports / competitor info / market knowledge and other relevant account information.
• Assist in the preparation of terminal reporting.
• Liaises with the commercial department on customer inquiries for new business opportunities.
• Assist with projects as they may arise.
• A customer service manager builds and maintains lasting customer relationships and loyalty whilst delivering a customer-centric experience. A customer service Manager has a deep understanding of the customers' needs, products, and supply chain.
• Oversees and manages the order process flow for all customers. Co-ordinates the customer assignment. Responsible for setup Operational Review Meetings.
• Leading in continuous improvement and process optimization. Responsible for effectively and productively managing resources.
• Initiate Customer leadership teams.
• Develop and monitor training plan for customer service team.

Qualifications

• Possess a diploma in any discipline.
• Preferably experience in the (petrochemical) Industry.
• Experienced in leading teams and improving processes.
• Deep understanding of the customers' needs, products, and supply chain.
• Ability to think strategically and to lead.
• Excellent verbal and written communication skills
• Organizational skills and able to drive the organization in an effective and efficient way.
• Able to effectively manage personnel and delegate tasks to a diverse staff.
• Ability to prioritize and set goals short and long term.
• Analytical mind.
• 5- day work week with the need to do perform standby for 24hrs call when required.
• Willing to working in Jurong Island (Company transport is provided at designated pickup point)

What we offer

Join us and become part of a family-founded organization where your contribution counts.

• A full-time and permanent role
• Working Hours: 5 days’ work week (Mon-Fri), 8.30am to 5.30pm
• A competitive compensation package, including a 13th month
• Good Flexible Medical Benefits for you and your family members
• Company Transport is provided as designated pick-up point

How to apply

• Complete the online application form and send it to us along with your CV
• Short-listed candidate, will be invited to attend interview at our terminal

Got questions about the process? Contact [email protected].

About Stolt-Nielsen

The Stolt-Nielsen portfolio consists of its three global bulk liquid and chemicals logistics businesses: Stolthaven Terminals, Stolt Tankers and Stolt Tank Containers – Stolt Sea Farm and investments in LNG. Stolt Tankers is a division of Stolt-Nielsen Limited (SNL), focused on opportunities in logistics, distribution, and aquaculture. Stolt-Nielsen Limited is listed on the Oslo Stock Exchange (Oslo Børs: SNI). Our values: We act pragmatically, collaborate for success, commit to go further, and seek creative solutions.

Disclaimer for recruitment agencies

We don’t accept any unsolicited applications or CVs from recruitment and selection agencies.

Job Responsibilities:

• Attend to customer’s enquiries on job order status, availability and co-ordination of tasks,etc.
• Execution of customer's orders, processing and summarizing the essential informationgiven into the job order form with required attachments.
• Use of Trade-net to provide the Value-Added Service of permit declaration for customers
• Prepare orders for Planner and follow-up with customers when there are incompleteinformation or documents.
• Coordination for booking of chemcare in PSA for DG Isotanks or containers.
• Collate information for planner if there are any changes for the day itself for delivery
• Ensure all delivery orders / weighing tickets are received once job completed and forwardto customers as proof of delivery.
• Closing of job orders for billing once job is completed.
• Prepare documents and arrange for dispatch to deliver to shipping lines / customers.
• Attending to customer's request for quotes, checking of trucking rates, invoice discrepancies etc.
• Takeover the duties of customer service/base oil executive during their absence

Job specification:

• Minimum Diploma (General)
• Minimum 2 years of experience in transport logistics industry
• Candidate with Singapore experience will be an advantage
• Positive attitude and customer-oriented
• Team player with good communication and strong initiative
• Proficient in MS Office
• Good administration and organizing skills

Job Description

• To be able read Electrical/Instrumentation Drawings

• Experience in Electrical wiring troubleshooting

• Has Knowledge in Instrumentation & Motor Control

Job Requirement

• ITE in Electrical

• Able to write Service Report

• Able to follow the safety procedure

• Computer Literate

• Can work independently

• Willing to work overseas & accept offshore/onboard assignment

Job Benefits

• Excellent learning environment

• Training Provided

• Onboard Allowances

• Group Hospital Surgical Insurance/ Group Personal Accident Insurance

• Annual leaves starting with 14 days and up to 21 days

Working location:

15 Kwong Min Road

Singapore 628718

The Reliability Engineering Automation team prides itself in keeping Visa systems up and secure, catering to the 24*7 needs of the business. The team uses AI to aggregate observational data (from monitoring systems output, job logs, syslog, etc.) and data from ticketing, incident, and event management system data to produce a virtuous circle of continuous insights yielding continuous improvements and fixes The Staff Software Engineer, a highly motivated senior experienced individual contributor, responsible for innovative planning, designing and developing effective solutions in accordance with industry standards on best web development practices. As part of the team, you will be required to own key modules, perform code and design AI architectural reviews, suggest best practices and implement design and development standards. The role is a senior consultant who has the passion to solve problems, factor old codes, learn and pick up new technologies like generative AI, chatops, LLM, Onprem models. Model QA. The role will also be required to lead implementations on key modules and mentor junior team members,

Responsibilities:

• Have the passion in developing and supporting the growth of the next generation software architectures and inspire innovation within the team
• Develop scalable real-time low-latency Artificial Intelligence processing solutions in an agile delivery method
• Lead and guide the team in AI design, code and implement new algorithms to solve complex problems
• Develop AIOPS solutions using available tools and technologies and assist the global team in problem resolution by hands-on participation.
• Engage technical workshops with cross-vertical Technology partners for cross-vertical integration in software development

This is a hybrid position. Hybrid employees can alternate time between both remote and office. Employees in hybrid roles are expected to work from the office 2-3 set days a week (determined by leadership/site), with a general guidepost of being in the office 50% or more of the time based on business needs.

Job Description

• To be able read Hydraulic Circuit Drawings

• Experience in Heavy machinery related to hydraulics such as crane, winch & HPU tc..,

• Experience working in any Marine Vessel /Ships

• Has Knowledge in Instrumentation & Motor Control

Job Requirement

• ITE in Mechanical

• Able to write Service Report

• Able to follow the safety procedure

• Computer Literate

• Can work independently

• Willing to work overseas & accept offshore/onboard assignment

Job Benefits

• Excellent learning environment

• Training Provided

• Onboard Allowances

• Group Hospital Surgical Insurance/ Group Personal Accident Insurance

• Annual leaves starting with 14 days and up to 21 days

Working location:

15 Kwong Min Road

Singapore 628718

The Service Advisor is responsible for communicating with customers about their vehicle repair needs and relaying information to the Service Technicians. Their duties include greeting customers and helping them determine repairs and relevant costs, maintaining up-to-date knowledge about their employer’s range of services and contacting customers to update them about their vehicle’s repair status. The staff will have to prepare the following as well:

• Daily report
• Monthly report
• Liaise with customers on their vehicle issues and status
• Liaise with vendor on the quotation and invoices
• Warranty claim & recall, submission, etc..
• Any other tasks and assignments given by superior as part of training and development.
• Maintaining a safe and organized workshop environment
• Performing other administrative duties as required

• Free Shuttle Bus Service (Tuas West MRT)
• Youthful & Dynamic Work Culture Environment
• Career & Growth Development

Roles & Responsibilities

Job Summary

If you enjoy working in a fast pace environment and the challenge of redefining what good service means to people, this position is for you.

Join JIJI.SG's operations and customer service team to help us improve and exceed our customers' expectations when they shop with us!

In the process, learn how operations is managed for an online store, from inbound operations such as freight forwarding and receiving shipments, to outbound operations such as picking and packing, working with 3rd party couriers and managing our in-house delivery fleet.

Most importantly, future team members must have a strong sense of dedication to our customers' happiness.

Job Description

• Responsible to deliver a customer-centric experience and assist customers across all channels including phone calls, emails and live chat.
• Going the extra mile to ensure customers’ needs and expectation are met.
• Actively involved in refining customer experience through customer feedbacks and observing daily operations.
• Proactive and initiative to constantly improve internal processes.

Requirements

• Strong communication and problem-solving skills to assist customers with any issues they face when they shop with us, including product enquiry, delivery or order related enquiry.
• Cheerful and friendly disposition when communicating with customers.
• Strong sense of dedication to our customers’ happiness.
• Process-oriented and good attention for detail.
• Accountable and responsible team-player.
• Able to work independently and also as a team.
• Past experience in either operations or customer service will be a plus.

Hiring for Westgate (Jurong East) outlet

French and Japanese Kitchen cafe

Responsible for serving customers, and keeping counters and tables clean.

Minimize wastage and have good teamwork, positive attitude.

Opportunity to learn beverage making.

Training provided.

Meals provided.

Staff Discount

Responsibilities:

• The candidate shall have comprehensive knowledge and experience of water and wastewater non-infrastructure design, including an understanding of the basics and the integration of multidisciplinary elements, including process engineering and MEICA.
• The candidate shall have technical knowledge and expertise to the design team on all design stages, including feasibility studies, outline design, detailed designs, and preparing technical specifications.
• The candidate shall be able to carry out and lead structural design for concrete, steel, and masonry structures to meet client and regulatory standards.
• The candidate shall carry out structural design calculations for all aspects of Water Treatment and Sewage Treatment plants, including both new build and modifications to existing plants
• The candidate shall review of structural content of construction drawings/models
• The candidate shall review of subcontract design proposals Ensuring all work is considered for buildability, standardisation and DfMA, and for safety on site complying with CDM regulations
• The candidate must have the knowledge to design reinforced concrete and steelwork design by applying all relevant Eurocodes and British Standards Co-ordination and liaison within a multi-discipline organisation including construction oversight and site support
• The candidate shall work to procedures and processes to ensure the continuing development of the discipline
• The candidate shall coordinate all aspects of design with other disciplines and use resources both internal and external
• The candidate shall have proficiency in civil and structural engineering software, such as STAAD, Tedds Staad, PRO, Robot Structures or similar FEM analysis software, and have experience working within a 3D design environment, as well as producing hand calculations for the structural design of reinforced structures
• The candidate shall have a good knowledge of civil and geotechnical engineering, and an awareness of mechanical and electrical engineering sufficient to enable collaborative working with these other disciplines.
• The candidate shall produce and review deliverables, including calculations, drawings, technical reports to relevant standards and procedures
• The candidate shall support the preparation of the project budget and programme.
• The candidate shall Coordinate with other technical disciplines to develop innovative solutions.
• The candidate shall maintain files and records throughout the duration of the contracts.
• The candidate shall ensure provide services which focus on customer satisfaction.
• The candidate shall ensure that the design fully considers all health and safety requirements, including, but not limited to, CDM 2015 regulations.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.

Qualifications:

• Degree in Civil Engineering.
• The candidate shall have about 3 years of experience in structural design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be advantageous.
• Ability to rationalise designs and produce economic plant layouts.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Primary Responsibilities:

• The candidate shall supervise and review the design of the electrical team by checking specifications, schedules, datasheets, drawings, and 3D models to ensure quality, safety, and technical standards are adhered to.
• The candidate shall review clients, design engineers and/or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle from front end engineering design (FEED) through to detailed design, technical assurance, testing & commissioning and final handover.
• The candidate shall produce design layouts which are cost effective, meet the requirements of the specification and which can be constructed and commissioned effectively.
• Ensure that standard practices are utilised wherever possible.
• Provide estimates and feedback for proposals department.
• The candidate shall undertake outline and detailed designs and specifications for electrical, instrumentation and control works.
• The candidate shall provide day-to-day technical input as part of a team of engineers.
• The candidate shall ensure that the design output is completed in accordance with the agreed scope of work, timescales, and budgets.
• The candidate shall liaise with other disciplines within the organisation or the project team to fully integrate all design elements.
• The candidate shall provide written reports of system options.
• The candidate shall write specifications for electrical systems.
• The candidate shall prepare calculations and technical/equipment specification documentation.
• The candidate shall monitor the installation of designed equipment/systems to ensure compliance with design specifications and safety codes.
• The candidate shall have good knowledge of electrical design (LV and HV systems), motor control centres/switchgear, electrical installations and systems within industrial/process environment, HAZOP assessments, DSEAR/ATEX installation practice, production of SLD/BCD’s, earthing and bonding and familiarity with current UK design standards, including industry-specific standards and working practices.
• The candidate shall have proficiency in designing appropriate digital analysis packages and electrical design software such as Trimble/Amtech. Also, able to write and review technical documentation (technical specifications, control philosophies, URS)
• The candidate shall work to the procedures and processes to ensure the continuing development of the department.
• The candidate shall ensure designs take account of environmental issues.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.

Preferred Qualifications

• Degree in Electrical Engineering.
• The Candidate shall have about 5 years of experience in electrical design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.
• Ability to present technical proposals clearly, confidently and convincingly.
• Able to work independently in producing the project deliverables to meet project timeline.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Responsibilities:

• Collaborating with Process Engineer & Engineering team to establish QC standards.
• Creating documentation for inspection criteria and quality plans.
• Collaborating with QA, Process, and Product teams to address quality issues through corrective action.
• Conducting in-process audits and final quality control audits with the Process team.

Requirements:

• Diploma in Manufacturing/Quality Engineering or equivalents.
• Minimum 1 year of working experience in Electronics Manufacturing Industry.
• Responsible for controlling Supplier Quality Assurance (SQA).
• Oversight of quality control for incoming, in-process, and outgoing products.
• Knowledgeable in ISO 9001, 14001, 13485, and 45001, and FDA requirements.
• Understanding IPC requirements in PCB assembly and quality standards for various manufacturing processes such as plastic molding, die casting, extrusion, metal stamping, and machining parts.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities

• Understand/develop technical design specification/requirements and associated document relevant to project.
• Develop system database, control logic and graphic according to project design
• Conduct Factory Acceptance Testing and system commissioning on site.
• Produce test document and training material.
• Conduct training to customer
• Provide technical support to sales and maintenance team

Requirement

• Possess Diploma or Bachelor's Degree in Mechatronic or Electrical & Electronic Engineering
• Ideally with 2 or more years of DCS/PLC/SCADA/Harmonas programming experience
• Ability to read electrical/P&ID schematics
• Able to work in a collaborative team environment
• Possess good interpersonal and communication skills
• Positive working attitude with pleasant personality
• Independent problem solver with a desire to learn new skills and technology
• Work under pressure to meet project deadlines in a multi-tasking environment
• Candidates with no relevant working experience are welcome to apply

We regret that only shortlisted candidate(s) will be contacted.

Responsibilities:

• The candidate shall carry out Outline and Detailed Mechanical Designs which are cost-effective and meet the requirements of the client’s specifications, and which can be purchased, installed and commissioned effectively.
• The candidate shall produce and check all design deliverables, including Design Specifications, Schedules, Drawings, and Calculations, and must have a good knowledge of CAD and BIM design.
• The candidate shall supervise and review the design of the Mechanical team by checking specifications, schedules, datasheets, drawings, and 3D models to ensure quality, safety, and technical standards are adhered to.
• The candidate shall review clients, or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• Challenge client asset standards where a clear opportunity exists to use an alternative, cost effective process or product without reducing the overall outcome.
• The candidate shall carry out tender bid analysis for various items of plant.
• The candidate shall complete deliverables on time and to budget and, where necessary, manage the deliverables of others to ensure deliverables dates and budgets are maintained.
• The candidate shall manage/monitor the work of others in the organisation or project team as necessary, including checking and/or reviewing their work.
• The candidate shall prepare fee estimates, design programme and liaison with clients to agree project deliverables.
• The candidate shall liaise with other disciplines within the organisation or the project team to ensure that all design elements are fully integrated.
• The candidate shall carry out quality control review of design calculations, General Arrangement Drawings, 3D models and Piping & Instrumentation Diagrams, TOTEX and CAPEX and preparing technical mechanical specification sections.
• The candidate shall carry out subcontractor or third-party design reviews until these are accepted.
• The candidate shall ensure that standard practices are utilised wherever possible.
• The candidate shall ensure provide services which focus on customer satisfaction.
• The candidate shall ensure that the design fully considers all health and safety requirements, including, but not limited to, CDM 2015 regulations.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.
• The candidate shall ensure that designs take account of sustainability and environmental issues.

Preferred Qualifications

• Degree in Mechanical Engineering.
• The Candidate shall have about 5 years of experience in mechanical design works, preferably with contractor experience.
• Experience in water and/or wastewater treatment processes and relevant mechanical design criteria will be an advantage.
• General experience of other discipline criteria associated with water and/or wastewater treatment including civil, process, EICA and project management in other discipline criteria associated with water and/or wastewater treatment, including civil, process, EICA and project management, will be an advantage.
• General understanding of client regulatory environments.
• Budget management experience will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Responsibilities:

• The candidate shall supervise and review the design of the Mechanical team by checking specifications, schedules, datasheets, drawings, and 3D models to ensure quality, safety, and technical standards are adhered to.
• The candidate shall produce and review all design deliverables, including design specifications, schedules, drawings, and calculations, and have a comprehensive knowledge of CAD and BIM design.
• The candidate shall review clients' or third-party designs and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• The candidate shall challenge client asset standards where a clear opportunity exists to use an alternative, cost-effective process or product without reducing the overall outcome.
• The candidate shall carry out tender bid analysis for various items of plant.
• The candidate shall complete deliverables on time and to budget and, where necessary, manage the deliverables of others to ensure deliverables dates and budgets are maintained.
• The candidate shall manage/monitor the work of others in the organisation or project team as necessary, including checking and/or reviewing their work.
• The candidate shall prepare fee estimates, design programme and liaison with clients to agree project deliverables.
• The candidate shall carry out quality control review of design calculations, General Arrangement Drawings, 3D models and Piping & Instrumentation Diagrams, TOTEX and CAPEX
• Preparing technical mechanical specification sections.
• The candidate shall carry out subcontractor or third-party design reviews until these are accepted.
• The candidate shall ensure that standard practices are utilised wherever possible.
• The candidate shall ensure provide services which focus on customer satisfaction.
• The candidate shall ensure that the design fully considers all health and safety requirements, including, but not limited to, CDM 2015 regulations.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.

Preferred Qualifications

• Degree in Mechanical Engineering.
• The candidate shall have about 8 years of experience in mechanical design works, preferably with contractor experience in water and wastewater industry
• Experience in water and/or wastewater treatment processes and relevant mechanical design criteria will be advantageous, by reviewing pump calculations, hydraulic calculations, P&IDs, Process Flow Diagrams and technical specifications
• General experience in other discipline criteria associated with water and/or wastewater treatment, including civil, process, EICA and project management, will be an advantage.
• General understanding of client regulatory environments.
• Budget management experience will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.

Responsibilities:

• Manage technical transfer of products/projects in assembly, testing, and customer interactions.
• Offer technical support for manufacturing and testing during product builds.
• Assist QC with technical support in resolving RMA issues.
• Support QA in compliance, regulatory matters, customer interactions, and audits.

Requirements:

• Diploma in Electronics Engineering and above.
• Minimum 2 years of working experience in Electronics Manufacturing Industry.
• Skilled in managing product/project manufacturing, transfers, and troubleshooting.
• Experienced in PCBA manufacturing and testing for products/projects.
• Preferably experienced in a manufacturing environment with ISO13485 and FDA standards.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Primary Responsibilities:

• The candidate shall supervise and review the design of the electrical team by checking specifications, schedules, datasheets, drawings, and 3D models to ensure quality, safety, and technical standards are adhered to.
• The candidate shall review clients, design engineers and/or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle from front end engineering design (FEED) through to detailed design, technical assurance, testing & commissioning and final handover.
• The candidate shall produce design layouts which are cost effective, meet the requirements of the specification and which can be constructed and commissioned effectively. The term ‘cost’ is to embrace all costs associated with the design and the subsequent construction of the design. To be cost-effective, the whole outturn cost of the design solution must be considered, including design time costs, material costs, erection costs and any impact that the design solution might have on other disciplines.
• The candidate shall liaise with other disciplines within the organisation or the project team to fully integrate all design elements.
• The candidate shall provide written reports of system options.
• The candidate shall write specifications for electrical systems.
• The candidate shall prepare calculations and technical/equipment specification documentation.
• Monitor installation of designed equipment/systems to ensure compliance with design specifications and safety codes.
• The candidate shall have experience in leading design delivery, including multidisciplinary design.
• The candidate shall have Excellent knowledge of electrical design (LV and HV systems), motor control centres/switchgear, electrical installations and systems within industrial/process environment, HAZOP assessments, DSEAR/ATEX installation practice, production of SLD/BCD’s, earthing and bonding and familiarity with current UK design standards, including industry-specific standards and working practices. Also, able to write and review technical documentation (technical specifications, control philosophies, URS)
• The candidate shall have proficiency in designing appropriate digital analysis packages and electrical design software such as Trimble/Amtech.
• The candidate shall ensure that standard practices are utilised wherever possible.
• The candidate shall provide estimates and feedback for the Proposals department as required
• The candidate shall work through procedures and processes to ensure the continuing development of the department.
• The candidate shall maintain files and records throughout the duration of contracts.
• The candidate shall assist in supervising and developing staff.
• The candidate shall assist in ensuring a safe working environment for all staff.
• The candidate shall ensure designs take account of environmental issues.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.

Preferred Qualifications

• Degree in Electrical Engineering.
• The candidate shall have at least 8 years of experience in electrical design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be an advantage.
• Experience in monitoring members of staff in designing relevant discipline aspects of water and sewage treatment plants will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.
• Ability to present technical proposals clearly, confidently and convincingly.
• Able to work independently in producing the project deliverables to meet project timeline.
• A flexible mind, with the ability to assimilate large amounts of different data at one time.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Responsibilities

• Assists Topsides Engineering Project Manager in managing engineering work including engineering deliverables, man-hour and schedule control, mainly in multi-disciplinary topsides design related activities and to ensure work performed on the project is in accordance with company quality, systems and safety requirements
• Understand the contract and scope of work for topsides with sub-contractor
• Prepares key project documentation as per project specification requirements
• Manages project topsides related drawings and controls technical documentation across disciplines
• Prepares schedule, pre-planning and resource forecasting for engineering and other technical activities relating to the project topsides design, ensuring all activities are kept within the project budget
• Assists topsides EPM in organizing regular inter-discipline review meetings and interface checks.
• Participates in project meeting, reports on the project status and attends to basic technical queries and issues including reviewing the performance of vendors/ subcontractors in the project
• Liaises with customers, topsides design sub-contractor, vendors, consultants and cross-functional team to coordinate project plan and handles technical issues in order to meet the project schedule
• Assists topsides EPM to ensure Design Reviews conducted with appropriate attendees and manage the action register to monitor the close-out of identified action items.
• Supports topsides EPM in identifying dependencies and obtaining alignment with project stakeholders to ensure safety and quality are not sacrificed in the effort to meet the project schedule.
• Collates project documentation and database from the project for submission and retention, as required and compiles the records from current and past projects as lessons learnt
• Reviews the activities & deliverables list from each discipline, mainly the topsides design related activities & deliverables
• Lead & co-ordinate between Hull’s Team, topside lead designers from every discipline, external design house (when applicable) & client (when applicable) to define the boundary for each module and boundary between topside & hull
• Co-ordinates between discipline to utilize the shared license based-on work priority;
• Monitors & control the topsides design manhours based-on the available budget allocated by commercial team or as defined by discipline Lead Designer
• Records & follow-up all the topsides design pending issues / problems highlighted by Lead Designers from every discipline, and report to Topsides Engineering Manager
• Expedites the information required by each discipline prior to start & complete the topsides design works
• Monitor 3D model clashing issues with other discipline
• Prepares Weekly Report related to Overall topsides design Progress, Area of Concern, Pending Items, Clashes Register, Interface Register, Down Time Register, Available Resources against Planned Resources, Manhour Usage against Planned Manhour, etc & Action Plan & submit to Topsides Engineering Manager/Engineering Project Manager & GM
• Assists topsides EPM in preparing project close-out, including as-built documentation and engineering close-out reports.
• Tack and coordinate changes with Discipline Leads ensuring team members follow the management of change process (MOC); ensure recorded changes are followed through.
• Proactively identify and monitor areas likely to change to reduce the “surprise” element, added costs and delays to project.
• Coordinate the interfaces with subcontractors and third party consultants and ensure all changes are captured through MOC process

Requirements

• Minimum Bachelor Degree in Engineering
• Minimum 10 years working experience in offshore oil and gas project managing topsides design works
• Able to liaise with internal and external parties
• Able to comprehend the strategies, work methods, processes and systems in overall project execution and engineering execution of topsides design
• Highly competent interpersonal and influencing skills to tactfully and diplomatically manage ambiguity, conflict and uncertainty in a culturally diverse environment.
• High awareness of safe working practices associated with design, construction, mechanical completion, pre-commissioning and commissioning of an oil and gas facilities.

Our Addresses and Working Hours:

Seatrium (SG) Pte. Ltd.

Tuas Boulevard Yard

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

Mon - Thu: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

As the Facility & Security Engineer, you will be responsible for overseeing all aspects of facility operation, maintenance and projects within our electricity generating plants, ensuring compliance with local regulatory policies. In addition, you will be involved in the development of a Facilities Asset Management Plan, identifying improvement opportunities and implementing best practices.

Responsibilities:

• Plan and coordinate infrastructure and equipment maintenance schedules & activities.
• Respond to work order requests and equipment maintenance schedules & activities.
• Investigate, analyze and determine root cause and report breakdowns and faults effectively.
• Carry out and review facilities’ maintenance programs and recommend actions as required.
• Identify and report on plant and equipment inefficiencies and possible improvement initiatives.
• Evaluate operational systems and facility infrastructure to ascertain and improve operational efficiencies.
• Monitor and review plant infrastructure, asset life expectancy and implement long-term maintenance plans.
• Prepare Purchasing Documents for the purchase of spares & the purchase of Work Services required to carry out the rectification works of the faulty equipment, faulty buildings’ infrastructure etc. (E.g. Preparation of tender specifications for service contracts such as cleaning, landscaping, pest control, waste disposals, card access systems, lifts & sewerage treatment plants’ service & maintenance works, auto-gates/ auto-barriers maintenance).
• Prepare the Facility Asset Management Plan (AMP).
• Design and oversee the implementation of facility expansion, layout, systems, and quality controls.
• Engage contractors and establish procedures to supervise and monitor the performance of contractors to ensure that the company’s requirements for work services are met.
• Ensure compliance with relevant regulations, building codes, and health and safety standards.
• Prepare technical reports on breakdowns, proposals and compliance documents.

Requirements:

• Degree in Mechanical, Electrical, Facilities Management Engineering or equivalent.
• Experience with SAP, and MS Office, especially Excel & PowerPoint.
• Knowledge of the building regulatory requirements in Singapore.
• Strong verbal and written communication skills.
• Strong troubleshooting, problem-solving and project management skills.
• Experienced in managing small to medium scale plant & building facilities incorporating maintenance plans, scheduling, costings, and cost controlling.
• Experienced in carrying out plant & buildings maintenance works, demonstrates personal creativity and/or flexibility in problem solving and budgeting process approaches

A member of the Electrical team, you will be responsible for performing Electrical maintenance works in accordance to maintenance plan including carrying out projects as required.

Job Descriptions:

• Perform troubleshooting and root cause analysis to resolve plant faults
• Execute approved plant improvement works and prepare technical specifications for equipment parts, work services and raise requisition papers
• Perform scheduled plant inspection according to maintenance regime and execution of plant maintenance activities
• Supervision of maintenance contract works and prepare work procedures for all maintenance activities
• Preparation of weekly and monthly activity reports, overhaul, technical and trip reports
• Perform other duties as assigned by supervisors

Job Requirements:

• Graduate in Electrical Engineering with a keen interest to build a career in the Power industry
• Sound knowledge in Electrical
• Self-motivated team player; analytical mind with strong planning & problem solving skills
• Have a safety mindset and display good workplace safety behavior.
• Be a part of the CERT team and be actively involved in emergency responses whenever called upon.

Your Company

We are a future forward advanced mechanical precision manufacturing company with an outstanding & proven track record for innovation, agility, growth & stability. We are poised for our next phase of growth in the semi-conductor, medical, oil & gas, automotive & optics sectors. Our team is rapidly expanding to fill the next generation leadership roles & advance our current operational capabilities.

Your Role

As our Sales Engineer, you will play a vital role in the company’s revenue growth through obtaining new sales from existing and new customers, as well as maintaining strong business relationship with customers.

Your Calling

· Plan and carry out sales activities (quotation, price negotiation, delivery, etc.)

· Hunter role need to exploring new potential customers and obtain new businesses

· Execute sales and marketing strategies to improve/increase sales revenue

· Liaise with customers and address their feedbacks/issues

· Establish and maintain strong business relationships with existing and potential customers

· Provide sales and technical/engineering support to customers

· Prepare and deliver technical presentation to explain and promote company’s services

· Keep track of orders and ensure timely delivery

· Monitoring competition by gathering current market information on pricing, delivery lead time etc.

· Any other ad-hoc duties as assigned

Your Success Factors

· Min. Diploma Holder in Precision/Manufacturing Engineering or similar field

· Able to read and interpret technical drawings

· Experience in Precision Engineering or related field advantageous

· Have experience in using ERP Systems advantageous

· Outgoing personality with strong interpersonal hunger for success and communication skills

· Initiative and results driven

· Entry level candidate are welcome