Position Summary

Responsible for new product introduction Production Tooling Development, and production support engineering for a specific product or group of products after transfer from design to in-house or outsourced production. Interfaces with design, process, test, reliability and manufacturing engineering to solve product issues and production problems. Develops and sustains process improvements to reduce production costs and increase yields.

Position Responsibilities:

• Support and drive production tooling development activities during NPI and sustaining phases.
• Support and drive activities to ensure successful product transfer into manufacturing.
• Drive troubleshooting, failure analysis, root cause analysis, issues closure and corrective action processes as required.
• Establish and maintain databases of Production Tooling.
• Perform data trending analysis, construct and execute design of experiments to address yield and quality issues.
• Drive and implement process improvements and product sustaining activities to meet the production goals.
• Drive maintenance and improvement activities on test fixtures and equipment.
• Drive and implement cost reduction activities by perform engineering evaluation to qualify new or improved materials, processes and products.
• Apply various analysis techniques, such as FMEA and statistical analysis to optimize product quality and minimize cost, providing all calculations, performance data, and drawings required on new and existing products.
• Manage and coordinate Engineering Change Order implementation activities including scrap analysis, material disposition, update work instructions and test requirement changes.
• Documentation responsibilities include, but not limited to, generating detailed engineering drawings, Bill of Materials, test reports, assembly procedures and design validation plans.
• Work closely with contract manufacturing partners and key suppliers to ensure smooth transition of quality products from development into manufacturing.
• Applies basic problem-solving techniques to define and resolve routine issues.
• Determines a course of action based on guidelines.
• Works on assignments of limited scope where answers can be readily obtained and problem solving requires following standard practices/procedures.
• Develops working relationships internally.
• Exchanges standard/basic information with colleagues, immediate supervisor, project leaders and other professionals in the team/group.

Listed responsibilities are an essential, but not exhaustive list, of the usual duties associated with the position. Changes to individual responsibilities may occur due to business needs.

Position Requirements (Experience/Education/Skills):

• Bachelor’s Degree or Masters in Mechanical or Electro-Mechanical Engineering

All listed requirements are deemed as essential functions to this position; however, business conditions may require reasonable accommodations for additional task and responsibilities.

Preferred Experience/Education/Skills:

• Typically requires a minimum of 2 years of related experience with a Bachelor’s Degree; or 1 year and a Masters degree; or a PhD without experience; or equivalent work experience.
• 2+ years of engineering experience in mechanical or electro-mechanical based products for commercial and industrial markets.
• Good working knowledge and experience in enclosure and chassis, structure, mechanism design and electro-mechanical systems.
• Strong organizational skills, attention to detail and accuracy, and the ability to work independently in a team environment are essential.
• Solid knowledge of GD&T, plastic & sheet metal tooling, casting, mechanism, stress analysis, mechanics, machining and standard manufacturing processes.
• Candidate must be able to effectively work together as a team, interface well with the manufacturing and service organization, and has a proven track record of transferring products to manufacturing.
• Must possess good analytical and troubleshooting skills.
• Proficient in engineering tools such as, statistical analysis, design of experiments, product and process capability analysis.
• Proficient in Solidworks or 3D CAD tools.
• Good working knowledge of BOM (Bill-Of-Material) structuring fundamentals and have the ability to create ECOs (Engineering Change Order) and Deviations.
• Demonstrated use and understanding of MRP systems, Product Data Management systems and Change Control processes. SAP & PLM experience will be added advantage.
• Experience with FDA regulated medical device product development preferred.
• Product development experience in the life sciences, biotech, biomedical, nanotechnology or semiconductor industries preferred.

Job Summary

· To develop Motion Control Solutions and algorithm for precision stages and robotic applications

· To develop R&D product development integration with motion control solutions

· Evaluation of R&D product performance

Job Responsibilities

1. Development of Motion Control with complex motion profile requirement for jerk reduction, vibration control

and force control

2. Development of R&D products in accordance to motion control solutions

3. Technical review of motion control products, including controllers, drivers, encoders and any peripherals

4. Provide technical support for product range including motion controllers, PLC, HMI, motor drives, DDT motors

and actuators, encoders and robotic arms.

5. Diverse a vibration monitoring system for predictive maintenance investigation

People Requirements

1. PhD/Degree / Diploma in any Mechatronics, Electrical, Electronic, Control or relevant Engineering discipline

2. Familiar and knowledgeable in Closed-loop Control systems and precision engineering

3. Knowledgeable in control systems principles and electrical fundamentals

4. Programing in C#

5. Self-motivated and good communication skills

Job Description:

As a Senior Design Engineer, you will report directly to the Design Manager and play a critical role in managing and executing BIM processes for ACMV/HVAC systems. You will be responsible for developing, maintaining, and overseeing accurate 3D models, ensuring alignment with project requirements, and collaborating across various disciplines to ensure seamless integration and coordination of the models. Your expertise will also be pivotal in quality control, design processes, and continuous improvement of BIM standards within the company.

Key Responsibilities:

1. BIM Modelling and Management

• Develop and maintain accurate 3D BIM models for ACMV/HVAC systems in construction projects, including components such as air handling units, ductwork, piping, and associated equipment.
• Update models to incorporate design changes and engineering solutions.
• Coordinate and collaborate with other BIM engineers from various disciplines (structural, architectural, electrical, plumbing) to integrate all models and ensure compatibility.
• Perform clash detection and resolve conflicts within the BIM environment to minimize construction issues.
• Establish and maintain project-specific BIM standards, methods, and procedures, adhering to company protocols and local Singapore BIM guidelines.
• Generate 2D drawings, schedules, and reports directly from BIM models for project documentation and construction purposes.

2. Design

• Participate in the conceptualization and detailed design of ACMV/HVAC systems, ensuring compliance with local codes, standards, and best practices, including the Singapore Code of Practice (CP13), SS553, and the Fire Code.
• Prepare design documents, including system layouts, schematics, and specifications.
• While thermal load calculations and energy modeling are not yet implemented, you will be responsible for using design software and tools to perform these tasks as needed in future projects. System sizing will be carried out as part of the current design process.
• Review and approve shop drawing submittals.

3. Coordination and Communication

• Participate in design meetings, coordination workshops, and BIM coordination meetings.
• Liaise with project managers, architects, engineers, contractors, and clients to ensure the project design and execution plan are clearly understood.
• Present BIM models to project teams, stakeholders, and clients to facilitate understanding and gather feedback.

4. Quality Assurance and Control

• Ensure quality control of BIM models and design documentation, maintaining accuracy and consistency.
• Validate model-based project deliverables for compliance with project standards and ensure the accuracy of all information.

5. Professional Development

• Stay current with the latest trends and advancements in BIM and ACMV/HVAC technologies.
• Engage in continuous learning to enhance your knowledge and expertise in design, construction, and BIM-related areas, with a career progression pathway aligned toward project management.

Preferred Experience Areas:

• Hospitals, Labs, Operating Theatres
• Commercial or Industrial Buildings (Warehouses, Factories)
• Government Projects
• Data Centers

Requirements

• Education: Degree in Mechanical Engineering or a related field. Candidates with a degree in Sustainable Infrastructure are welcome to apply. Fresh graduates are encouraged to apply.
• Experience: Must have project ACMV experience.
• Certifications: Safety certification, minimum Bizsafe Level 2. Training will be provided if not already certified.
• Skills: Proficient in English, both written and spoken.
  Strong independence and leadership in a teamwork environment.
  Knowledge in BIM is an added advantage.
  Ability to move across various local sites.
• Soft Skills: Excellent communication, collaboration, and problem-solving skills.

Advantages & Benefits:

• 5-day work week.
• Progression-centric career development.
• AWS and Variable Performance Bonus included.
• Annual Incentive Trip.
• Sponsorships for further learning/education.
• Flexible working hours and work-from-home options.
• Comprehensive medical benefits.

JOB DESCRIPTION
Department: Facility Engineering
Report to: Facility Executive
Functional Relationships with:
Machine Engineering, Manufacturing Engineering and Production

POSITION PROFILE:
Based in: Singapore
Job site: Yishun
The successful candidate will explore the knowledge of Facility equipment maintenance, energy saving, and EHS-related activities.

KEY DUTIES & RESPONSIBILITIES:
• Overhaul, preventive maintenance, corrective maintenance
• Monitor equipment operating condition and record in the checklist
• Making of DI water & treatment of wastewater including maintenance
• Changing of H2 LPG cylinder and monitor N2 consumption
• Maintenance of RTO solvent pumps & room pressure condition
• Maintenance of Last IC Air-Con, Compressors, Vacuum & Exhaust system
• Maintenance and repair of general breakdowns such as toilet taps, floor tiles, painting, etc.

ABILITY/COMPETENCY REQUIRED:
• Diploma in Engineering field (Electrical/Electronic/Mechatronic/Electromechanical) or equivalent.
• Able to work 12 hours rotating shift (morning and night)
• At least 1 year of working experience in the related field is preferred for this position

• Fresh graduates are welcome to apply

• Able to work well as a team player while being independent and pro-active

• Communicate, interact well with all concerned parties Employer questions

Responsibilities

• Design and implement electrical systems for construction projects.
• Prepare detailed project plans and specifications.
• Conduct site inspections to ensure compliance with electrical codes and standards.
• Troubleshoot and resolve electrical issues on-site.
• Coordinate with project managers, contractors, and other engineers.
• Ensure all electrical work is completed on time and within budget.
• Maintain accurate records of all electrical work performed.
• Provide technical support and guidance to other team members.
• Review and approve electrical designs and plans.
• Ensure all electrical systems are safe and operational.
• Conduct risk assessments and implement safety measures.
• Stay up-to-date with the latest electrical engineering technologies and practices.
• Prepare and present reports on project progress and electrical issues.
• Manage and supervise electrical contractors and subcontractors.
• Ensure compliance with all relevant regulations and standards.
• Participate in project meetings and provide input on electrical matters.
• Develop and implement maintenance schedules for electrical systems.
• Assist in the procurement of electrical materials and equipment.
• Provide training and support to junior engineers and technicians.

Requirements

• Bachelor's degree or Diploma in Electrical Engineering or a related field.
• Minimum of 3 years of experience in electrical engineering

JOB DESCRIPTION:

Department: Machinery Productive Management Enhancement

Reports to: Manager

Functional relationships:

- Machinery R&D division in Japan

POSITION PROFILE:
This position is to organize the activities for enhancement of machine maintenance capability and support for machine maintenance activity in each factory.

Key Duties & Responsibilities:

• Policy, strategy alignment and coordination of projects by collaborating with Japan HQ or other group company in Japan
• Machine safety enhancement in ASEAN by instilling MMC safety standard
• Network enhancement in all Murata maintenance functions
• Proceed Murata maintenance ability assessment in ASEAN based on Japanese standard
• Maintenance enhancement activity by instilling MMC standard way and technology
• Initiate periodical meeting with Japan HQ or other group company to solve issues in own Division
• Make strategy with oversea factory and Japan HQ in order to enhance machine maintenance capability in ASEAN
• Plan and arrange training session for machine maintenance engineer
• Report project progress to Japan HQ

Ability/Competency required:

• Degree/Diploma in Engineering field or minimum 7 years working experience in machine maintenance or machine design or equivalent.
• Fluent in speaking & writing for both Japanese and English to support communication with Japan and other oversea affiliate
• Having logical thinking, conceptual skill and good leadership
• Having proactive attitude and strong communication and interpersonal skills.

Benefits/ What we offer:

1. Competitive salary and benefits package
2. Opportunities for career advancement and professional development
3. Collaborative and inclusive work environment

Company Overview:

Kong Hwee Iron Works & Construction Pte. Ltd. is a leading construction firm specializing in structural steel projects across Singapore. With a commitment to excellence and innovation, we deliver high-quality, state-of-the-art structures that shape skylines and communities. As we continue to expand our operations, we are seeking a dynamic and skilled Project Engineer to join our team and contribute to our success.

Job Description:

As a Project Engineer specializing in structural steel construction, you will play a pivotal role in the planning, execution, and completion of our projects. Working closely with our project managers, you will oversee all aspects of construction, ensuring adherence to timelines, budgets, and quality standards. This is an excellent opportunity for a talented individual to make a significant impact in the dynamic field of construction engineering.

Key Responsibilities:

• Collaborate with project managers to develop project plans, schedules, and budgets for structural steel construction projects.
• Conduct thorough site assessments and surveys to identify potential challenges and ensure compliance with regulatory requirements.
• Coordinate with architects, engineers, subcontractors, and suppliers to facilitate the timely procurement of materials and resources.
• Manage day-to-day construction activities, including site logistics, safety protocols, and quality control measures.
• Monitor project progress and performance, identifying and addressing deviations from plans and specifications.
• Provide technical expertise and problem-solving support to resolve construction-related issues effectively.
• Prepare and review engineering drawings, specifications, and documentation to ensure accuracy and completeness.
• Foster a culture of teamwork, innovation, and continuous improvement among project team members.

Qualifications:

• Bachelor's degree in Civil Engineering, Structural Engineering, or a related field.
• Minimum of 2 years of experience in project engineering, preferably in the structural steel construction industry.
• Proficiency in Tekla software.
• Strong understanding of construction principles, practices, and techniques.
• Excellent communication, leadership, and interpersonal skills.
• Ability to manage multiple priorities in a fast-paced environment.
• Familiarity with Singapore building codes, regulations, and industry standards.
• Immediate availability will be preferred

Our vision is to transform how the world uses information to enrich life for all.

Micron Technology is a world leader in innovating memory and storage solutions that accelerate the transformation of information into intelligence, inspiring the world to learn, communicate and advance faster than ever.

Responsibilities

• Process module ownership involving regE process characterizations and advanced process developments for 3D NAND and beyond.
• Work with process development engineers in Singapore and Boise, US TD site and vendors to develop regE processes that meet integration requirements for next-generation 3-D NAND nodes.
• Transfer regE processes to high volume manufacturing (Fab10), and work on continuous improvements to manufacturability.
• Address specific wafer edge issues (such as bevel defects, uniformity issues), working with Fab10N team and with key business partners on tool choices for manufacturing, evaluations etc., as applicable.
• Focus on understanding and improving regE process margins required for meeting the mature yield goal for 3D NAND parts.
• Initiate and manage experiments to widen regE process margins as well as to test out manufacturability of next node solutions
• Incorporate best known manufacturing methods into early development phase of upcoming nodes.
• Design and implement advanced process monitoring and control methodologies.
• Serve as a technical expert within Micron contributing to technical projects for improvements to processes, procedures and equipment.
• Define and leads complex, multi-functional projects of critical importance to Micron, helps to define strategic direction.
• Lead team or sites or suppliers on complex, multi-disciplinary projects in quality focused meetings, process and yield improvement meetings, cost and productivity improvement meetings
• Provide advice and counsel to management on significant technical issues. Leads and initiate innovation projects through patents/technical papers.
• This position requires communications and collaboration with partners both locally and globally. Strict adherence to Micron Intellectual Property protection policy is a must.
• Be part of the continuous worldwide TD engagement with suppliers pushing for breakthrough solutions.

Requirements

• Bachelors’ degree or higher in Materials Science, Chemical Engineering or Physics with minimum 2 years hands-on experiences in relevant regE process developments.
• Familiarity with regE process developments and yield improvements.
• Understanding of various integration and structural impacts and constraints related to wafer edge.
• An understanding of the general process steps and process flow for memory processing, planar and vertical NAND memory in particular.
• Working knowledge of data analysis systems e.g.: Y3 to facilitate analysis of experimental data
• Working knowledge of Design of Experiments (DoE)
• Proven ability to collaborate with local and overseas teams on projects
• Excellent oral and written communication skills with ability to convey the message in concise and effective manner both in local as well as remote communications.
• Ability to be a self-motivated individual and be adaptable to Micron’s changing needs in terms of working extended hours, if required
• Proven ability to work in a demanding & dynamic environment and able to prioritize and manage multiple projects simultaneously
• Ability to travel for extended periods of time and stay at Boise TD for 4-6 months at a stretch to work on technology development.

As a Senior NAND Cell Device Engineer, in the Singapore Device Technology Development group of Micron Technology Inc., you will be responsible for electrical characterization of the NAND memory cell and develop novel device solutions for cutting-edge 3D-NAND flash technologies. You will have an exciting opportunity to develop best-in class non-volatile memories and products in the world!

Job responsibilities:

• Develop an understanding of performance & reliability requirements for new NAND cells and help refine requirements, as necessary.
• Characterize NAND Memory cell and array properties to identify device improvement directions.
• Analyse automated tester data to establish product qualification gaps, identify new device corners and improve detection capabilities.
• Contribute to the architecture and process definition for state-of-the-art NAND cell, by providing expertise in NAND device physics and array operation.
• Collaborate effectively with process, integration, product, and design engineers, to address NAND memory cell deficits and deliver improvement roadmaps.

Requirements:

• M.S or Ph.D. in Electrical or Electronics Engineering, Physics or Materials Science Engineering or similar.
• 3+ years of work experience in CMOS or non-volatile memory is preferred.
• Deep understanding of semiconductor device physics and processes.
• Knowledge of statistical methods for experiment design and data analysis.
• Solid communication and reporting abilities.
• The ability to be highly skilled at driving for results.

As a Process Engineer you will be primarily responsible for starting up, developing and optimizing processes to improve product quality and reliability, working on process yield improvement, cost reduction, productivity improvement and risk management as well as resolving manufacturing line problems. You will also be required to identify, diagnose and resolve assembly process related problems by applying failure analysis, FMEA, 8D or SPC/FDC methodology. Additional responsibilities include coordinating and carrying out process, equipment and material evaluation/optimization/development to implement changes at process step, leading and participating in yield improvement and cost reduction activities, handling new process baseline qualifications and managing, auditing and liaising with equipment/material suppliers to achieve yield, quality, cost and risk management objectives.

Micron’s NAND Technology Integration (NTI) Singapore R&D group is looking for process development engineer to support R&D activities associated with rapid deployment of technology nodes, the process margin improvement work necessitated thereof as well as to ensure extended engagement with manufacturing on the upcoming technology nodes.

Responsibilities

• Develop and optimize unit processes to meet the yield and quality requirements of advanced NAND products.
• Quantify benefits of innovative process and/or equipment solutions to enable early experimentation and adoption for process margin improvement
• Prioritize within Singapore based manufacturing CVD/PVD teams on the key technology issues that need R&D breakthroughs.
• Integrate and troubleshoot processes as part of cross-functional teams driving yield and quality improvement
• Participate with Boise R&D Films peers on technology choices for the upcoming nodes and able to translate future technology device needs into clear process requirements
• Identify disruptive processes early on and work with manufacturing and Boise R&D to identify viable path forward
• Process development will include performing fundamental research, hardware evaluations, as well as testing processes for novel applications and generating intellectual property relevant to Micron.
• Initiate and manage experiments to widen process margins as well as to test out manufacturability of next node solutions
• Identify process simplification opportunities and drive cross functional teams in implementation
• Incorporate best known manufacturing methods into early development phase of upcoming nodes.
• Design and implement advanced process monitoring and control methodologies.
• Serve as a technical expert within Micron contributing to technical projects for improvements to processes, procedures and equipment.
• Lead team or sites or suppliers on complex, multi-disciplinary projects in quality focused meetings, process and yield improvement meetings, cost and productivity improvement meetings
• Provide advice and counsel to management on significant technical issues. Leads and initiate innovation projects through patents/technical papers.
• This position requires communications and collaboration with partners both locally and globally. Strict adherence to Micron Intellectual Property protection policy is a must.
• Be part of the continuous worldwide R&D engagement with suppliers pushing for breakthrough solutions.

Requirements

• Master degree or higher in Materials Science, Chemical/Microelectronic Engineering, or Physics with minimum 3 years hands-on experience in leading edge film deposition/implant technology work. Fresh PhD/Masters graduates in Materials Science, Chemical/Microelectronic Engineering or Physics are also welcome to apply.
• A deep understanding of chemical kinetics, thermodynamics, physical phenomena and their direct application to CVD/PVD deposition in various deposition methods.
• An ability to understand and troubleshoot precursor depletion effects within three dimensional structures and come up with innovative ideas to mitigate the effects.
• Basic understanding of films and interface engineering and analysis techniques thereof – SIMS, XPS, EDX, SEM/TEM.
• Understanding of various integration and structural impacts and constraints related to film deposition processes.
• An understanding of the general process steps and process flow for memory processing, planar and vertical NAND memory in particular.
• Working knowledge of data analysis systems e.g.: Y3 to facilitate analysis of experimental data
• Working knowledge of Design of Experiments (DoE)
• Proven ability to collaborate with local and overseas teams on projects
• Excellent oral and written communication skills with ability to convey the message in concise and effective manner both in local as well as remote communications.
• Ability to be a self-motivated individual and be adaptable to Micron’s changing needs in terms of working extended hours, if required
• Proven ability to work in a demanding & dynamic environment and able to prioritize and manage multiple projects simultaneously
• Ability to travel for extended periods of time and stay at Boise R&D for 4-6 months at a stretch to work on technology development.

As a Senior Equipment Engineer/Equipment Engineer in the NTI, you will be expected to support R&D activities associated with rapid deployment of First-of-Kind equipment, the CIP hardware evaluations and managing on the timeline needed to deploy in current technode/next advance technode on time. Good team spirit and good collaborations working is needed with various stakeholders including (not limited to) facilities/fab support/Gas & Chemical/EHS/F4/F10/Central team etc with various equipment setup and improvement work necessitated thereof as well as to ensure extended engagement with F4 on the upcoming First-of-Kind equipment in upcoming technode. Expected to work independently with minimal direction and complete projects in a timely manner and achieve set objectives.

Responsibilities

• Leading the design, development and characterization of new tools and identifying and closing any hardware and procedural gaps.
• Innovate solutions that enable best in class performance
• Oversee installation and upgrades of tools ensuring quality of work, cost control and alignment to project schedule.
• Engage equipment vendors to improve current products and implement roadmap needs.
• Work with Process Engineers, Manufacturing, Procurement, and Vendor partners to develop a comprehensive package capable for our volume manufacturing sites.
• Generating and maintaining documents that outline equipment performance, operating procedures, maintenance specifications, and cost metrics.
• Support Internal And External Audits

Requirements:
• A minimum of 2-3 years of experience in the semiconductor industry in the area of equipment engineer roles.
• In-depth understanding of the equipment operation, working principles, troubleshooting and tool installation procedure is a must.
• Exposure to R&D equipment transfer and ability to develop/optimize equipment hardware design is preferred.
• Communications and collaboration with partners both locally and globally. Strict adherence to Micron Intellectual Property protection policy is a must.
• Self-motivated and adaptable to Micron’s fast paced, demanding and dynamic work environment; flexibility to work for extended hours, as required.
• Excellent oral and written communication skills with ability to convey the message clearly and sharply both locally and globally.
• Excellent ability to prioritize and manage multiple projects simultaneously; efficiently utilize available resources or seek peers’ and/or management help to get over the roadblocks to drive to solutions.
• Encourage and enforce safe, compliant behavior through periodic communications and the performance management process.

GJS for this position: E2 and above

Location: Fab10N

Closing Date: Until filled

Overview

Keysight is on the forefront of technology innovation, delivering breakthroughs and trusted insights in electronic design, simulation, prototyping, test, manufacturing, and optimization. Our ~15,000 employees create world-class solutions in communications, 5G, automotive, energy, quantum, aerospace, defense, and semiconductor markets for customers in over 100 countries. Learn more about what we do.

Our powerful, award-winning culture embraces a bold vision of where technology can take us and a passion for tackling challenging problems with industry-first solutions. Diversity, equity & inclusion are integral parts of our culture and drivers of innovation at Keysight. We believe that when people feel a sense of belonging, they can be more creative, innovative, and thrive at all points in their careers.

Keysight's customers encounter significant cybersecurity risks, which present both opportunities and challenges for our products and solutions. Our mission, "accelerating innovation to connect and secure the world," embodies our purpose and dedication to ensuring the security of our own products. To fulfill this mission, we must prioritize cybersecurity within Keysight and in the products and solutions we provide to our customers.

Job Description:

As a Product Security R&D Engineer at Keysight Technologies, your primary responsibility will involve close collaboration with the Product Security Applications team. Your task will be to integrate secure development methodologies into all our products and services. This includes working with embedded Windows and Linux platforms across various operating systems. The overarching goal of our Product Security Programs is to ensure that all Keysight products meet the necessary regulatory security standards and requirements before they are shipped out.

Team Overview: The Product Security Applications Team, established in Singapore in 2017, is an R&D team dedicated to enhancing the security standards of Keysight products. Their focus is on making sure our products are safe and secure for our end customers. As the sole R&D security team within Keysight, their primary objective is to continually elevate the security baseline of our products.

Responsibilities:

• Collaborate with product development teams throughout different stages of the development lifecycle to integrate product security requirements using Keysight’s Windows and Linux platforms.
• Provide technical support for product security assessments, utilizing tools such as composition analysis, vulnerability management, penetration testing, and fuzz testing. Additionally, assist development teams in devising strategies to address and mitigate identified vulnerabilities.
• Provide technical support for third party open-source license compliance.
• Support and/or recommend third-party tools to assess the security posture of our products in alignment with recognized industry standards.
• Understand and implement product security programs across all operating system (OS) platforms used by Keysight’s products.

Basic Qualifications:

• Bachelor’s degree in computer science/engineering or equivalent experience with security technologies.

Desired Qualifications:

• Experience in software development using C/C++, JavaScript, and Python programming languages.
• Good understanding of common application and network protocols, cryptographic technologies, and common security threats on OS designs (including Linux, Windows, and mobile platforms).
• Strong interest in software engineering, security application development, and security assessment.
• Ability to thrive in dynamic and highly technical organizations.
• 1-2 years of experience working with product development/engineering and security expertise.

Fresh graduates with security-related internship experiences and security knowledge may also be considered

• You are responsible to drive and manage the silicon Bump & package assembly suppliers, backend processes and solutions to achieve the aggressive TQRDCEB goals.
• You will work closely with package design & technology, test & product engg, production planning, quality engg & NPI teams, assembly/substrate suppliers to support new product & technology introduction activities by defining processes, monitoring systems, manage process improvements and changes.
• Provide day-to-day support to bump and assembly suppliers & internal planning, product and test engineering teams.
• Plan, drive & implement improvement activities for continual improvement, 2nd sourcing, cost reduction & customer satisfaction.

Qualifications:

• PhD / Master / Degree in Mechanical / Electrical / Electronics Engineering with 7~12 years of relevant experience of managing advanced node silicon bumping, large body single & multi-chip (2.1/2.5/3D) package assembly, substrate & back-end suppliers and processes.
• Hands on experience in Product Life-Cycle Management - creating & maintaining Bill of Material structure, Process Documentation, Process Change Notification etc.
• Good team player, result oriented individual, experienced in project management, failure analysis tools, techniques and TQM. Good analytical, problem-solving skills. Flexible and agile.
• Sound knowledge of applicable industry standards, quality systems, regulations, knowledge of prevailing and emerging silicon package & substrate technologies, bumping and assembly processes, materials and equipment.
• Able to communicate with internal team members & external partners in various geographic locations and may required to travel from time to time at short notice.
• Experienced AutoCAD user. Knowledge of silicon & PCB fabrication, board assembly processes, are an added advantage

Provide technical support and assist Manager in project planning and coordination of all site activities.

• Prepare and revise engineering documents, drawings, risk assessments, method statements, safe work procedures, operations and maintenance manuals for all necessary works.

• Coordinate and supervise construction teams and subcontractors for the erection, testing and commissioning of installation of equipment to the required specification and quality.

• Liaise with consultants, owners and relevant authorities on their engineering request.

• Plan and schedule work activities at sites in accordance to master program and ensure work is conducted in a timely and safe manner.

• Ad-hoc duties assigned by the Management from time to time.

Yishun

Monday to Friday 9am to 6pm

Need to travel to China

Salary up $4000 (Salary commensurate with experience)

Japanese MNC

Semicon industry

Duties and Responsibilities
Service matters:
- Liaising directly or indirectly with external customers in Singapore or other countries for any service/ technical related matters.
- Account Management directly or indirectly be it technical or support related matters.
- Respond to customer sites when require.

Operations matters
- Inventory control such as controlling the movements of the spare parts in the store and monthly stock-taking of part etc.
- Issue Service order / Service report / Quotation to either appointed agent or customers.
- Prepare and update all service reports to be submitted weekly for any service tasks or response carried out.
- Liaising with external vendors, customers and Headquarter on any related issues and enquires.
- Impart machine/ service knowledge to peers so as to build up the service capability.
- Conduct demo/ trainings for customers / peers as and when require.
- Able to provide service support overseas as require.
- All other related work as assigned by superior.

Requirements

• Diploma/Degree in mechanical/mechatronics or related engineering
• No experience can apply as training provided

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.

Alternatively, you may also email your resume to us at [email protected]

Emily Fong

Senior Talent Specialist

Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443

EA Personnel Reg No.: R1768368

Yishun

Monday to Friday 9am to 6pm

Need to travel to China

Salary up $4000 (Salary commensurate with experience)

Japanese MNC

Semicon industry

Duties and Responsibilities
Service matters:
- Liaising directly or indirectly with external customers in Singapore or other countries for any service/ technical related matters.
- Account Management directly or indirectly be it technical or support related matters.
- Respond to customer sites when require.

Operations matters
- Inventory control such as controlling the movements of the spare parts in the store and monthly stock-taking of part etc.
- Issue Service order / Service report / Quotation to either appointed agent or customers.
- Prepare and update all service reports to be submitted weekly for any service tasks or response carried out.
- Liaising with external vendors, customers and Headquarter on any related issues and enquires.
- Impart machine/ service knowledge to peers so as to build up the service capability.
- Conduct demo/ trainings for customers / peers as and when require.
- Able to provide service support overseas as require.
- All other related work as assigned by superior.

Requirements

• Diploma/Degree in mechanical/mechatronics or related engineering
• No experience can apply as training provided

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.

Alternatively, you may also email your resume to us at [email protected]

Emily Fong

Senior Talent Specialist

Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443

EA Personnel Reg No.: R1768368

Yishun

Monday to Friday 9am to 6pm

Need to travel to China

Salary up $4000 (Salary commensurate with experience)

Japanese MNC

Semicon industry

Duties and Responsibilities
Service matters:
- Liaising directly or indirectly with external customers in Singapore or other countries for any service/ technical related matters.
- Account Management directly or indirectly be it technical or support related matters.
- Respond to customer sites when require.

Operations matters
- Inventory control such as controlling the movements of the spare parts in the store and monthly stock-taking of part etc.
- Issue Service order / Service report / Quotation to either appointed agent or customers.
- Prepare and update all service reports to be submitted weekly for any service tasks or response carried out.
- Liaising with external vendors, customers and Headquarter on any related issues and enquires.
- Impart machine/ service knowledge to peers so as to build up the service capability.
- Conduct demo/ trainings for customers / peers as and when require.
- Able to provide service support overseas as require.
- All other related work as assigned by superior.

Requirements

• Diploma/Degree in mechanical/mechatronics or related engineering
• No experience can apply as training provided

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.

Alternatively, you may also email your resume to us at [email protected]

Emily Fong

Senior Talent Specialist

Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443

EA Personnel Reg No.: R1768368

Yishun

Monday to Friday 9am to 6pm

Need to travel to China

Salary up $4000 (Salary commensurate with experience)

Japanese MNC

Semicon industry

Duties and Responsibilities
Service matters:
- Liaising directly or indirectly with external customers in Singapore or other countries for any service/ technical related matters.
- Account Management directly or indirectly be it technical or support related matters.
- Respond to customer sites when require.

Operations matters
- Inventory control such as controlling the movements of the spare parts in the store and monthly stock-taking of part etc.
- Issue Service order / Service report / Quotation to either appointed agent or customers.
- Prepare and update all service reports to be submitted weekly for any service tasks or response carried out.
- Liaising with external vendors, customers and Headquarter on any related issues and enquires.
- Impart machine/ service knowledge to peers so as to build up the service capability.
- Conduct demo/ trainings for customers / peers as and when require.
- Able to provide service support overseas as require.
- All other related work as assigned by superior.

Requirements

• Diploma/Degree in mechanical/mechatronics or related engineering
• No experience can apply as training provided

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.

Alternatively, you may also email your resume to us at [email protected]

Emily Fong

Senior Talent Specialist

Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443

EA Personnel Reg No.: R1768368

Yishun

Monday to Friday 9am to 6pm

Need to travel to China

Salary up $4000 (Salary commensurate with experience)

Japanese MNC

Semicon industry

Duties and Responsibilities
Service matters:
- Liaising directly or indirectly with external customers in Singapore or other countries for any service/ technical related matters.
- Account Management directly or indirectly be it technical or support related matters.
- Respond to customer sites when require.

Operations matters
- Inventory control such as controlling the movements of the spare parts in the store and monthly stock-taking of part etc.
- Issue Service order / Service report / Quotation to either appointed agent or customers.
- Prepare and update all service reports to be submitted weekly for any service tasks or response carried out.
- Liaising with external vendors, customers and Headquarter on any related issues and enquires.
- Impart machine/ service knowledge to peers so as to build up the service capability.
- Conduct demo/ trainings for customers / peers as and when require.
- Able to provide service support overseas as require.
- All other related work as assigned by superior.

Requirements

• Diploma/Degree in mechanical/mechatronics or related engineering
• No experience can apply as training provided

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.

Alternatively, you may also email your resume to us at [email protected]

Emily Fong

Senior Talent Specialist

Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443

EA Personnel Reg No.: R1768368

Your responsibilities will include, but not limited to:

FAB PROCESS KNOWLEDGE

• Proficient knowledge of wafer process and traveler flows for main products.
• Understands high-level factory limitations.
• Knowledge of capacity analysis and production planning. Knowledge about Sales and Operations Planning (SNOP) and MOR business processes.

PROJECT MANAGEMENT

• Demonstrates advanced ability to successfully define, plan, and handle the implementation of complicated projects.
• Appropriate and timely escalation of roadblocks to project sponsor.
• Developing delegation, risk/cost analysis, and project tracking skills.
• Regular communication of project progress to stakeholders, team members and sponsors.

PLANNING SYSTEMS, APPLICATIONS, COMPUTER, MICROSOFT OFFICE and PROGRAMMING SKILLS

• Understands the interaction of planning systems and associated applications used within Micron.
• Understanding of system interaction, adept at extracting data from various systems.
• Demonstrates ability to use Microsoft Office to develop presentations, handle projects and perform all other tasks in an effective manner.
• Advanced ability in Excel and proficient in using VBA Macros to enhance and automate tasks.
• Advanced ability in Programming / Data Automation programs, e.g. Python, Tableau, Power BI, etc. to automate tasks and support data analysis.

STRATEGIC OPERATIONS

• Provide planning support for Emerging Projects.
• Support capacity studies for Special Projects.
• Provide Business Planning support for various Capacity Options.
• Analyze Fab Capital Expenditure and Output Scenarios for Business Plan.
• Fab Mix optimization for various Capacity and Capital Expenditure Scenarios.
• Efficient management of Capital Expenditure scenarios and cash flows through scenarios comparison and optimization.
• Ability to provide and evaluate modeling options that enable lowest cost of operation.

FINANCIAL ANALYSES

• Partner with Finance team to complete a thorough financial analysis through various scenarios (Manufacturing Cost, return on investment/payback, Net Present Value NPV, Profit/Loss (P/L) analysis).
• Ability to provide and evaluate Scenario options to improve financial analysis.

Requirements :

• Bachelors’ Degree in Industrial Engineering or equivalent experience. Additional major/minor in Computer Science, or a Business-related or quantitative field (Finance, Economics or similar subject area), MBA or Master’s degree is a plus
• Proficient in Microsoft Office to develop presentations, handle projects and perform all other tasks in an effective manner.
• Advanced ability in Excel and proficient in using VBA Macros to enhance and automate tasks.
• Advanced ability in Programming / Data Automation programs, e.g. Python, Tableau, Power BI, etc. to automate tasks and support data analysis.
• Ability to turn complex and ambiguous problem statements into structured solution.
• Experience analyzing and interpreting data, drawing conclusions, defining recommended actions, and reporting results cross diverse technical and non-technical groups
• Experience working independently in teams, establishing and maintaining multi-functional relationships
• Experience in a combination of capacity analysis, business analysis or process analysis is advantageous

Working Locations :

1, North Coast Drive, Singapore 757432

WORKING : 6 DAYS WORK WEEK, 9AM-6PM

Roles & Responsibilities

1) Site work - liaison with subcontractors where necessary

2) Commissioning - testing of devices and provision of acceptance test report and documentation on installation works and equipment information

3) Site surveys - basic RF planning knowledge and have installation considerations (training will be given)

4) Maintains product and company reputation by complying with telecommunication regulations

5) Conduct engineering site audits to collect structural, electrical, and related site information for use in the design of commercial and utility-scale solar power systems

6) Design the arrangements of the solar panels for Rooftop, Ground-mounted, Floating, and other various supported electrical equipment and selection of cables for plant including layouts and schematic diagrams and calculation of technical sizing, BOQ/BOM

7) Analyse costs and benefits of proposed designs or projects and performing cost reduction analyses for solar systems

8) Other ad-hoc duties as assigned

Requirements

1) Willing to travel and will be working in Singapore

2) Minimum a Bachelor’s Degree in Engineering, renewable energy or relevant field

3) Minimum two (2) years of relevant work experience

4) Experience and knowledge of reviewing Financial Modelling is preferred

5) Preferably with Energy Industry or Renewable Products background

6) Preferably to have a good track record of solar PV projects

7) Assertive to achieve the KPIs and adaptable both as individual and team player

8) Technical advisors, EPC contractors, BD related roles are welcome to apply

9) Proficiency in autocad

As the Facilities regional Water engineer, you will be responsible for leading water and waste water system design for construction projects, providing technical support, expertise, and lead business process alignment on operational and maintenance programs for all front and back end sites.  As a global team member residing in your current site/geography, you will represent all regional facility O&M alignment initiatives. You will also lead the design for construction team and incorporate critical operational and maintenance into design for construction projects. You will work with central team on critical metrics, include eliminating production events that minimize lost moves and scrap.

Responsibilities and tasks:

• Expert understanding of each sites UPW/WWT systems operational and maintenance capabilities in order to provide critical support.
• Leading UPW/WWT system design for construction projects
• In addition to your global water engineering role you will also provide site/regional support for global facility initiatives at your location.
• Technically lead a global cross functional team focused on operational excellence with the site systems engineers.
• Provide support to all sites including on site presence for critical failures.
• Actively involved in TPM implementation and alignment along with ongoing support
• Drive improvement in the quality of our utilities through variation reduction (SPC).
• Drive the alignment for common methodologies including SPC, conformance, SIPP’s, MOC and 8D problem solving throughout the network.
• Identify and deploy cost reduction efforts while optimizing and reducing energy usage for UPW/WWT systems throughout the network.
• Assess and insure effective and consistent PM and predictive maintenance programs, procedures and checklists across the network.
• Regular communication with the site engineering and O&M teams on status and performance.
• Analyze and benchmark equipment performance.
• Identify and develop training and certification programs that support global and site efforts
• Develop appropriate metrics to drive improvement (On time PM’s, MTTF, MTTR etc.).
• Send out regular updates with key items of focus and initiatives. 
  You will review FIPA/METS events and provide recommendations to drive the reduction of critical impact events.
• Collaborate with the construction / engineering team to insure alignment on projects.
• Review site sustaining capital requests in collaboration with construction/engineering.
• Support the network effort to implement, monitor and drive continuous improvement for success of Micron’s Sustainability programs in alignment with the long-term Sustainability strategy.
• Benchmark system performance and drive Best-In-Class approach (BICs) across network.
• Provide technical advice and support to overcome challenges and roadblocks in project planning & execution.
• Support sustainability projects achievement data acquisition and validation in central tracking depository.

Requirements:

• Excellent analytical and good decision making skills.
• Excellent interpersonal skills and demonstrated ability to communicate effectively at all levels within the organization.
• Excellent teamwork and collaboration with other groups, internally and externally.
• Proven ability to solve problems across multi-functional and multi-cultural groups within and outside facilities.
• Proven ability to multi-task and lead team to meet challenging deadlines and goals.
• Proven ability to continuously improve systems and processes.
• Ability to foster strong relationships from cross-functional and multi-cultural groups.
• Exceptional customer focus.

Education Required

• Bachelor’s Degree in Chemical/Mechanical Engineering

Experience required

• 10 years of Facilities  UPW/WWT or Chemical/Gas system engineering experience with minimum 6 years in semiconductor industry

Experience Desired

• Lead or actively involved in global facility engineering efforts

Responsibilities:

• Design, development, testing and support of firmware/embedded software applications for microcontroller based wireless systems.
• Develop software communication protocols for wireless communication systems
• Drive technology/development projects in all phrases from specification to release.
• Read or understand electronics schematic and system design.
• Work closely with cross functional teams to ensure project delivery on time.
• Define and create product software specification including software architecture, feature descriptions and applications notes of the system
• Research technical issues and/or opportunities and provide recommendations.
• Participate in ad hoc software projects and assignments as required

Requirements:

• Degree in Electronic/Electrical/Computer Engineering/Computer Science, Software Engineering or related fields.
• Minimum 3-5 years of experience in real time embedded system
• Must process strong knowledge of C/C++ language
• Experience with Arm, Cortex based microcontroller is required
• Strong Knowledge of the communication transport protocol like I2C, SPI, UART and USB
• Understanding of the Bluetooth protocol and stack is a plus.
• Familiarity with DSP programming is an added advantage
• Excellent teamwork skills, flexibility, and ability to handle multiple tasks.
• Able to manage one's own time efficiently

The above information on this description has been designed to indicate the general nature, and level, of the work performed by this position. It is not designed to contain, or be interpreted, as a comprehensive inventory of all duties, responsibilities and qualifications required.

Interested candidates may also apply or write in to CS Chua, EA 12C6130/ R1548619 [email protected]. Shortlisted candidates will be contacted for a discussion.

• Application for Building Management System / Energy Management in Singapore/ PLC Programming
• Lead technical discussion and clarification with the customer acting as key contact person for all technical related topics. Under Project Manager leadership monitor engineering deliverables and progress through continuous communication with team members and perform regular technical status reports. Take active part in meetings with the customer.
• Perform and get customer approval on basic and detailed design of integrated solutions in line with the contract (technical, time & performance requirements) and leveraging of products and systems, maximize project profitability and manage technical risk.
• Produce engineering outputs such as System architecture, sub-systems interfacing points, detailed point schedules, control panel drawings, equipment and control valve schedules, description of operations, database generation, graphics development, system hardware and software configuration and programming, etc. Proposal of HVAC and EMS controls strategies in various application.
• Master all technical aspects of the Project: design, integration, testing, FAT, installation,
  commissioning, warranty. Validate technical choices in compliance with the design (based on Technical
  Design Process). Manage stakeholders involved in the execution.
• Proficiency in Programmable Logic Controller, SCADA and DDC Controllers (preferably in Schneider
  brand) development and implementation for redundant system architectures on HVAC applications
  including chiller systems.
• Perform documentation relating to the project properly and promptly dealt with in the correct
  contractual manner. Production and control of RFI's, production of related design, engineering and
  commissioning documentation and operating and maintenance manuals in line with project
  requirements.
• Work in close collaboration with the customer’s project teams, consultants, main contractor, 3rd party
  vendors, Schneider Electric PM & technical leaders for sub-parts to understand the project milestones
  & deliverables and contribute to the overall profitability of projects and to achieve high level of
  customer satisfaction.
• Constantly strive to improve efficiency of the Engineering Solutions through use of standards, tools,
  best practice and lessons learned associated to Controls Strategy, Programming, Graphics, Database
  generation, testing and Engineering Documentation to final Operation & Maintenance Manual.
• Insure good project execution within allocated budget. Identify and anticipate potential risks vs. agree
  budget. Identify and implement technical optimization to save time and cost. Contribute to overall
  Project risk analysis, assess technical risks and propose all necessary actions to avoid, mitigate or
  reduce its impacts. Pro-active in developing and implementing risk response strategies to minimize or
  remove risks
• Identify any potential changes on the job versus the contract or agreed design. Work closely with the Project Manager to specify the change and its implications including the quotation until getting the variation order which will contribute to Project Margin Improvement.
• Master from technical perspective all technical parts of the delivery sub-contracted to external vendors in strong coordination with purchasing team. Implement clear and meaningful scoping of subpart of project scope to insure effective progress and completion monitoring
• Alert on a possible non-technical feasibility as soon as identified. Provide necessary reporting to the PM and management

Responsibilities :

• Establish Detection to have 100% Inline visibility and Inline control

• Improve Detection strategy, system, and methods to continuously strengthen detection performance.

• Enhance Detection capability and strategy to enable Yield improvement, improve Cycle of Learning and strengthen Defense Line.

• Establish and improve BKM (Best Known Method) related to RAM Detection performance, RAM detection cost and RAM supplier engagement

• Ensure BKM sharing spans across all sites regardless of technology and/or site mission differences.

• Set up process parameters for Inspection and Measurement equipment.

• Plan and Evaluate through supplier demo, tool evaluation or H2H (head to head) and Promote new equipment/ material through TOR (Tool of Record) process.

• Implement abnormal analysis and improvement.

• Facilitate and drive global peer groups (HVM and TD) to ensure alignment on strategy and roadmap to achieve area objectives

• Prioritize resources (internally across network and/or externally with Suppliers) to close any gaps.

• Lead Copy Smart Team (CST) and hold the teams accountable to deliver to timelines/commitments. Support cross sites alignment activities through CST and provide strategic direction for the team.

• Set Business Process to handle your area(s) of responsibility to meet the expectations of programs and business processes and adhere to the standards required by those programs and processes.

• Actively provide recommendations to improve and optimize programs and processes to the respective program and/or process owners.

• Be part of the team to handle global business for RAM area, including Tool of Records (TOR), Model of Records (MOR), Manufacturing Tool Evaluation Program (MTEP), DOC2, Executive Review Meeting (ERM), Supplier Change Notice (SCM) documentation etc.

• Keep Acceptance Documentation and Configuration Specs (ADCS) updated to current TOR configuration in your area(s) of responsibility.

• Handle projects with proper Project Management process with metric to track project success.

• Initiate, develop, drive and support strategies that not only benefit one site, but Micron network as a whole.

• Identify and share Best Known Method (BKM) across sites and track compliance to agreed upon alignment to BKMs.

• Track Fab performance metrics for benchmarking purposes. Identify gaps and area of improvements for Fabs.

• Partner with Technology Development and Global Procurement to drive suppliers' competitiveness in RDA and Metrology area to reduce CapEx and OpEx.

• Provide tactical support and coordination for the Fabs as required for issues of People, Safety, Time to Mature cummulative Yield, Quality, Cost, and Cycle Time.

• Engage and drive suppliers on Tool roadmap (MRM), Technology sharing, and other projects

Requirements :

• Masters/Bachelors in Engineering

• Relevant working experiences in RDA and/or Metrology

• Willing and capable of international travel, including Extended International Business Travel (EIBT) assignment to 6 months as needed, to accomplish the goals. Work with suppliers to address issues of spares delivery, quality, performance and change management.

• Good communication skill, maintain a strong and open relationship with peer group and appropriate team members in other functional areas such as Process Integration Engineering, Quality Systems, Production Operations Management, and Purchasing.

• Promote worldwide sharing and transfer of area-specific domain knowledge

Working Location : 1, North Coast Drive, Singapore 757432