Job Summary

The M&E QA/QC Engineer will assist QA/QC Manager in the M&E and piping works for Integrated Waste Management Facility project. He / She should have a proven track record with excellent communication skills and possess strong technical knowledge of mechanical, electrical, structural and piping systems installation, as well as substantial hands-on project quality documentation and turnover experience in the construction sector.

(l) Job Description

• Conduct site Audit on the sub-contractor/vendor.
• Ensure that adequate equipment and facilities are provided for verification of product quality.
• Ensure that all controlled documents are administered effectively.
• Quality control of sub-contractors.
• Daily coordination of all site work activities on Piping, Equipment installation.
• Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.
• Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.
• Carry out verification of purchased products in vendor's premises as specified in contracts.
• Monitor and control quality of purchased products.
• Ensure identification and traceability of incoming, in-process finished products.
• Stipulate and control adequate criteria for workmanship.
• Monitor and control quality of special process performed.
• Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.
• Ensure that all inspection and test equipment are properly calibrated and controlled.
• Ensure that all nonconforming materials and products are adequately controlled.
• Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.
• Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.
• Ensure that quality records are properly stored and maintained.
• Define quality requirement for service and installation of products.
• Maintain adequate statistical techniques to control product and process quality.
• Compile Manufacturing Data Report (MDR).

(ll) Requirements

Education

• Bachelor's degree in Mechanical, Electrical, or a related field.

Experience

• 5 years QAQC experiences in EPC projects.
• Knowledge in Inspection of Pressure Vessel, Piping, FRP tanks, Rotating equipment such as pumps, fans, agitators, etc.
• Knowledge in Non-Destructive Test such as RT, UT, PT, MT and able to interpret test results.
• Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.
• Detail-oriented and have strong communication skills and able to work with people from all levels.
• Experiences in wastewater, desalination, water utility, incineration, power plant packages are preferred.
• Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.
• Strong communication and interpersonal ability, coupled with influencing skills.
• Strong verbal & written communication skills (English and preferably Mandarin)
• Independent and a self-starter, with strong personal drive to initiate and implement.
• Good knowledge of documentation procedures.
• Hands on experience with pressure vessel, PED & MOM requirements, EN standards.

Skills & knowledge

• Profound knowledge of M&E and piping systems and technologies.
• Excellent coordination skills and communication skills in English, both verbal and written.
• Proficient with Microsoft Office such as Word, Excel and Power Point.
• Ability to work with a diverse team.
• Ability to multi-task and be flexible/adapt to rapidly changing project requirements/timelines.
• Meticulous and analytical with excellent problem-solving skills.
• Able to work under tight deadlines.
• Highly motivated and ability to work independently with minimal supervision.

Key Responsibilities

Technical Delivery

• Undertake projects related to IT infrastructure (physical and virtual servers, Microsoft Exchange, Office 365, Azure, Active Directory on-premises and cloud) i.e. systems provisioning, installations, configurations as well as monitoring and maintenance.
• Plan, gather requirements, design, implement, test, troubleshoot systems as per system requirements for new or existing systems
• Provide technical support and advice to users on systems-related issues or queries
• Perform systems administration/maintenance and works toward continuous optimization of systems performance
• Standby with on-call availability with varied shifts including nights, weekends and holidays during critical cutovers, L2 support onwards
• Improve governance (policies, standards, guidelines) on successful delivery outcomes e.g. industry compliances, delivery frameworks/playbooks, port-mortem reviews, documentations
• Cross group collaboration
• Work closely with all technical group to on-board technical knowledge of solution offerings, inclusive of vendors and partners as needed

Qualifications/Experience/Knowledge

• Diploma/Degree or other equivalent
• At least 5 years of experience
• At least 2 years of project delivery experience
• At least 3 years of support experience
• Design, implement and support infrastructure projects
• Technical knowledge of on-premises (M365, Exchange 2013/2016) and email infrastructure related areas – Exchange cert renewal, CyberArk Setup
• Technical knowledge of infra stack (AAD, Active Directory migration services 2016/2019, Clustering)
• Hardware experience
  • IBM, Lenovo, HPE, Dell, Huawei
  • Possess strong problem-solving skills and able to prioritize and manage multiple tasks
  • Strong communication skills
  • Strong interpersonal and stakeholder management skills with ability to coordinate between technical and business teams
  • Able to interact with various levels of internal and external stakeholders both in written and verbal forms
  • Demonstrated project management experience handling multiple projects simultaneously
  • Ability to efficiently understand client organizations and their business model and to tailor relevant processes to privacy requirements
  • Added advantages:
  • Powershell scripting
  • ITIL Certification
  • Microsoft 0365/Azure cloud certification

We are hiring for System/Network/Storage Engineers

Responsibilities:

• Data migration.
• User provisioning
• User Training and Support
• Post-Migration support

Required skills and qualifications

Basic Qualifications:

Critical Skills:

• Knowledge of Intune / Autopilot
• Knowledge of windows reset
• Application downloads > recognize if something is blocked (Zscaler knowledge / or know how it works)
• Macro’s knowledge
• Communication skills
• Proactive
• Migrate user profiles, data, and settings to the new IT environment.
• Ensure data integrity and security during the migration process.
• Test and validate migrated data to identify and resolve any issues.
• Create and configure user accounts in the new IT environment.
• Assign appropriate permissions and access rights.
• Ensure seamless access to resources and applications
• Provide training and support to end-users during and after the migration process.
• Assist users with any issues or questions related to the new environment.
• Develop and maintain user documentation and knowledge base articles.
• Monitor the new environment for any issues or problems.
• Troubleshoot and resolve any migration-related issues.
• Provide ongoing support to end-users.
• Strong technical knowledge of IT infrastructure, including hardware, software, and networks
• Experience with end-user migration tools and techniques.
• Proficiency in Microsoft Office Suite and other productivity tools.
• Excellent problem-solving and troubleshooting skills.
• Strong communication and interpersonal skills.

Preferred Characteristics:

• Ability to effectively communicate and instill confidence with peers and all key stakeholders.
• Effective influencing and negotiation skills in an environment where resources may not be in direct control of this role.
• Excellent analytical, strategic conceptual thinking, strategic planning and execution skills.
• Strong business acumen, including industry, domain-specific knowledge of the enterprise and its business units
• Expertise in budget planning and financial management
• Deep understanding of current and emerging technologies and how other enterprises are employing them to drive digital business and how they may be applied to the enterprise to drive digital business
• Ability to manage geographically diverse teams and overcome the culture clashes that may arise
• Ability to drive organizational change and build capabilities that effectively balance the needs for continuously exploiting capabilities to optimize operational efficiency, with delivering innovative and agile IT solutions to enable the business to explore digital business opportunities
• Excellent verbal and written communication skills, including the ability to explain digital concepts and technologies to business leaders, and business concepts to the IT workforce

Job Responsibiltiies

• Prepares key project documentation including purchase specifications for structural items ,
• Develop drawings, design basis, design report and other engineering documentations by utilising engineering common network, software and tools for hull structure basic design and detail design,
• Develop and/or Review structural calculation report , FEM analysis report
• Coordinates with external design house, client, classification/ certificate verification authority on technical issues and design solutions in the awarded project
• Coordinates internally with other departments, i.e. construction engineering, QA, production, procurement team on technical query, clarifications, site query,
• Coordinates internally with other engineering discipline to develop layout drawings, penetrations and reinforcements, resolving interference problems etc,
• Participates in project meeting, attends to basic technical queries and issues related to basic structural design and reviews design deliverables on project facilities, fabrication, transportation and installation
• Liaises with owners, statutory and classification authorities for design compliance review and approval on the proposed project plans in meeting project requirements
• Generates reports on work progress and submits to senior team members for review and approval before submitting to owners, statutory and classification authorities for approval and maintains project database for future references
• Performs studies on a new range of offshore substation, and generates analysis on the basic structure design
• Performs analysis on main structure by generating design stress analysis to ensure design adequacy of structural members and details in main foundational framework
• Provide support to production during project construction phase, prepare lifting padeye drawing for major block lifting, and perform lifting analysis.

Our Address and Working Hours:

Seatrium (SG) Pte. Ltd - Admiratly Yard

60 Admiralty Road West, Singapore 759947

(Transport provided from Sembawang MRT)

Mon - Thu: 8:00am - 5:15pm

Fri: 8:00am - 4.30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability. We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte. Ltd. and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012

Job Description

• Prepare and review Instrumentation, Control and Automation (ICA) Works specifications.
• Assist the ICA Lead and manage the engineering design works for the Control System Architecture, Data Communication Networks, Functional Design Specification (FDS), Process Control Narrative (PCN) and Process Instrumentation Diagrams (P&IDs), Programmable Logic Controller /Distributed Control System (PLC/DCS) and Supervisory Control and Data Acquisition (SCADA) and any other ICA Works as required.
• Handle equipment package and procurement including technical specifications preparation, technical clarification, technical bid analysis, etc.
• Collaboration with multiple stakeholders including internal teams of different trades, clients, consultants, other packages contractors, sub-contractors and vendors to ensure success of the project.
• Prepare, review and liaison with subcontractor(s) in the design and submission, ensuring all project specifications and design standards are met.
• Work with cross function project team to support project activities, i.e. schedule, process, progress claims, work progress, etc.
• Manage and supervise the project execution, site installation, inspection, testing and commissioning, plant proving related to Instrumentation, Control and automation system and interface works with other disciplines and all stakeholders.
• Attend to clients’ comments and ensure clients’ approval & acceptance to all ICA related design, installation and Testing & Commissioning Works.
• Resolve the site technical related matters.

Design, Engineering, FAT, Installation, Testing and Commissioning of:-

• System Control PLC/DCS and SCADA.
• Input / Output list
• Data Communication Network and ICA Panels.
• Instruments.
• FAT and SAT of Interfacing Panels, Instruments, Pumps, etc.
• Cable Support System.
• Cabling & Termination Works.

Requirements

• Degree in Electrical & Electronic Engineering / Instrumentation & Control Engineering / Advanced Diploma in Process Control and Instrumentation.
• Experience in Selection, Installation, Testing and Commissioning of the Instrumentation.
• Experience in ICA engineering Works, preferably in water/wastewater projects will be an added advantage.
• Experience in Programming of PLC/DCS and SCADA.
• Experience in Project Execution, Supervising and Coordination with subcontractors, consultant and Client.
• Good knowledge in Microstation/Autocad software.
• Good technical understanding and experience in water, wastewater and environmental engineering works.
• Meticulous and analytical with excellent problem-solving skills.
• Able to work under tight deadlines.
• Highly motivated and ability to work independently with minimal supervision.
• Minimum 5 years relevant experience in engineering, installation, testing and commissioning of ICA Works.
• Able to work in the Tuas South area, in Singapore.

[Job ID: 402945]

Responsibilities:

• Manage the sales of the company’s Injection Molding Machines.
• Maintain relationships with existing customers and actively pursue new clients across Singapore and Southeast Asia.
• Engage in discussions and negotiations with customers regarding pricing and delivery timelines.
• Coordinate with factories in Japan, Thailand, India, and China.
• Work with Japan headquarters to provide updates on sales forecasts and budget reports.
• Prepare technical product documentation.
• Collaborate with engineers and other technical personnel for project alignment.

Requirements:

• 2-3 years of equipment sales experience in a similar industry.
• Solid technical knowledge of Plastic Injection Machines.
• Strong communication skills and a proactive attitude toward embracing new challenges.
• Self-motivated with the ability to work independently.
• Proficiency in Microsoft Excel, Word, and PowerPoint.
• A valid Class 3 driving license.

We regret that only shortlisted candidates will be notified. However, rest assured that all applications will be updated to our resume bank for future opportunities.

Please kindly refer to the Privacy Policy of Good Job Creations for your reference: https://goodjobcreations.com.sg/en/privacy-policy/

EA Personnel Name: Sandy Ng Mei Qi

EA Personnel Registration Number: R24125475

EA License No.: 07C5771

Job Highlights & Employee Benefits

• Part of a publicly listed company on SGX-ST with a stable revenue stream and growth prospects
• Annual performance bonus
• Annual salary increment
• Team bonding activities and birthday vouchers
• Leave, medical, and dental benefits
• Education sponsorship and fully funded external training

Responsibilities

Reporting to the General Manager, the successful candidate will analyze business needs and operational workflows to implement technological solutions (e.g., Microsoft 365) aimed at reducing manual processes and enhancing efficiency for local and international subsidiaries. Key responsibilities include:

1. Business AnalysisIdentify business requirements and challenges to develop applications that add value
   Collaborate with end-users to pinpoint inefficiencies, bottlenecks, and opportunities for workflow enhancements
   Convert end-user requests into technical specifications
   
2. Microsoft 365 Apps ImplementationOffer expertise and support to end-users on utilizing Microsoft 365 apps for improved efficiency
   Automate manual processes by designing and developing applications using the Microsoft Power Platform, including Power Apps, MS Flows/Power Automate, Power BI, etc.
   Collaborate with stakeholders and vendors to schedule development and implementation of business applications
   Conduct end-to-end testing, troubleshooting, and user support
   Maintain and update developed applications and create user guides for knowledge retention
   Provide technical training to enhance staff skills in Microsoft 365 tools and other systems
   

Requirements

• No prior work experience required, but must have the necessary skill sets
• Strong knowledge of Microsoft 365 technologies, SharePoint Online, and AppSheet is essential
• Proficient in workflow automation using Power Automate is a must
• Familiarity with Business Process Automation, Procurement, and Accounting Systems is a plus
• Holding any of the following Microsoft Certifications is advantageous: MS-900, PL-900, PL-100, PL-200, PL-400, PL-500, and/or PL-600

Additional Information

• Replacement position
• Office location: Pandan Road
• Working hours: 8:30 AM to 6:00 PM (Monday – Friday)
• Company transport provided from Clementi MRT (one-way)
• 3-month probation period
• No AWS; performance bonus based on company profitability and individual merit (historically a minimum of 1 month)
• Annual leave: 15 days (increases to 17 days after 5 years of service and 19 days after 10 years)
• Dental benefits: $250 per year
• Full medical fee reimbursement based on the company's designated GP (excluding pre-existing and chronic conditions)
• Medical leave adheres to the Employment Act

We regret only shortlisted candidates will be contacted. All applications will be handled confidentially. By submitting your application, you agree to the collection, use, retention, and disclosure of your personal information to prospective employers.

Wecruit Pte Ltd | EA License No. 20C0270

TEY WEI JIAN | EA Registration No. R24120855

Responsibilities

• Perform engineering duties such as design, engineering calculations, planning, tender preparation/evaluations as part of the engineering project team
• QA/QC documentation of engineering deliverables
• Liaison with clients, project managers, architects, contractors
• Assist in resolving any technical problems faced during project design and/or construction stages
• Any other required duties as required by the Project Team.

Minimum Qualifications/ Experience/Skills

• Graduate in Electrical/Mechanical Engineering.
• Advanced skills using company software
• Proven ability to communicate well in written and verbal communications
• Design thinking for product inventions and enhancements
• Motivation and commitment to providing interpersonal customer service
• Knowing and applying current industry standards and information
• Soft skills including a positive attitude, flexibility and conflict resolution
• The ability to solve problems creatively on time
• Having up-to-date knowledge and technical skills

The Civil Engineer is responsible for supervising structural projects. They ensure each project is feasible by analyzing local and environmental impacts and making sure that they can be completed on time within the budget restrictions. Other duties and responsibilities may include:

• Considering budget, regulations and environmental hazards during risk-analysis stage
• Preparing material, equipment and labor cost estimates and confirming costs are within the budget
• Forecasting design and construction timeline
• Completing and submitting all permit applications to the appropriate agencies and ensuring projects are compliant throughout the design and construction stages
• Overseeing soil testing to establish soil strength and building feasibility

JOB RESPONSIBILITIES

* To assist and support the Project Manager in handling and monitoring the progress of projects to ensure that work on site is on schedule

* To liaise and co-ordinate project site works with consultants, vendors/suppliers and sub-contractors

* Liaise and work with sub-contractos on shop drawings, equipment submission, site inspection and testing & commissioning matters

* Carry out site supervision and ensure work done on site is fully complied with specification and drawing

* Follow-up closely with sub-contractors on the progress of site works

* Ensure all work activities are carried out in a safe working environment

JOB REQUIREMENTS

* Degree or Diploma in Mechanical/Electrical Engineering or relevant disciplines from recognised institutions

* Min 5 years of working experience involving ACMV and M&E works in the construction industry

* Able to plan and co-ordinate M&E works and shop drawings

* Able to identify and follow-up site issues with the project team and sub-contractors

* Able to work independently and under tight schedule

Description

• Responsible for taking over the project from tender / sales team for execution
• Prepare PEPL’s Scope of work and create project schedule based on the scope - document submission list, material submission list, material lead time, installation and testing period
• Create Document submission & Material submission list and prepare submissions
• Design & review the drawings and documents for timely submission to customer
• Monitor submissions & follow up with customer for timely approval of the documents & material submissions
• Prepare Purchase Requisitions for purchase of necessary project materials on time and coordinate with purchase team and our subcontractor / supplier
• Plan the construction site manpower requirement together with Superintendent
• Coordinate with Superintendent / Construction Manager / Site supervisor for site work activities installation, testing & commissioning and progress report
• Maintain & update Project schedule regularly and prepare Weekly / Monthly Progress report for internal & customer
• Participate in regular customer meetings & proactively manage customer expectations by preparing necessary submissions / agenda / minutes of meeting etc.
• Manage the project cost within allocated budget
• Maintain Change Order Log and proactively manage change in scope. Prepare RFI / VOR and get VO from customer before executing the scope change.
• Prepare Progress Claims timely and follow up for approval and maintain Progress Claim Summary report
• Escalate challenges / issues to the Project Manager & management to resolve it on time
• Collaborate with Customer, Consultant, Owner, Third Parties, Suppliers & internal team members for successful project execution
• Organize & coordinate for Factory Acceptance Testing (FAT) of necessary equipment
• Perform pre-punch list walk thru with PM and Superintendent
• Clearing of punch list defects in collaboration with site team
• Prepare & provide training to customer for necessary equipment (as applicable)
• Responsible to collect all Handover & completion documents
• Manage & Comply with Workplace Safety & Health for project execution
• Organize necessary safety training for the project & site team members
• Comply with the PQP document for project execution

Requirement

• Diploma/Degree in Electrical Engineering or related studies
• More than 3 years of project management experience in related field
• Experienced in handling multiple projects
• Possess effective organizational and follow-up skills, meticulous
• Good interpersonal skills and able to interface with all levels, internally and externally, in a professional and responsive manner

Responsibilities

• Coordinate with internal team in Singapore liaise with customers / consultants on day to day basis
• Preparation of project documents including BQ
• Handling Design & Build projects
• Prepare optimised design solutions for projects
• Prepare Design drawings (Single Line Drawings & layout)
• Prepare design calculations incl voltage drop, short circuit current etc.
• Support multiple M&E projects concurrently
• Lead project meetings and work with team members to achieve the deliverables on-time
• Ensure drawings & documents are well maintained & stored in a timely manner
• Other adhoc duties as assigned

Requirement

• Diploma/Degree in Electrical Engineering
• Minimum 2 yrs of relevant hands-on M&E experience in construction industry, LTA projects, mixed development etc
• Need to be familiar with Singapore codes such as SS638 (CP5), SS650, SS555 etc
• Hands-on experience in AutoCAD drawings is preferred
• Familiarity in BIM (Revit / Navisworks) is advantageous
• Having consultancy experience is preferred
• Possess effective organizational and follow-up skills, meticulous
• Good communication skills
• Good interpersonal skills and able to interface with all levels, internally and externally, in a professional and responsive manner

Service Engineer | Up to $4k | Hydraulic Mobile Cranes Supplier | 5 Days

Location: Tuas (Company pick up available - West & North)

Salary: $3,000 - $4,000 + OT + AWS + Performance bonus

Working days: Monday - Friday

Working hours: 8:30am – 4.30pm

Job Description:

• Product delivery training to distributors and customer
• Provide diagnosis guidance and analysing of fault found to Distributor / End-user, remotely via emails and/or calls
• Carry out field services at site in local and ASEAN countries.
• Furnish service report and recommendation of spare parts, assisting Parts team to locate correct spare parts from parts catalogue.
• Furnish Warranty claims and Quality report to drive quality improvement on our products.
• Willingness to work beyond office hours if required and any other ad-hoc duties assigned from time to time.

Requirements:

• Diploma and/or certificates in Engineering with relevant working experience in construction machinery industry
• Able to read and understand Electrical, Hydraulic and Pneumatic schematic diagram
• Possess valid Class 3 Driving License

The Supreme HR Advisory Pte Ltd | 14C7279

Ong Boon Kiet (Travys) | R22104769

Senior Recruitment Consultant

Senior Marine Service Engineer

Salary range: SGD 3,700 to SGD 5,000 monthly, 13th month, SGD 250 transport allowance

Working Days: Monday – Friday

Working Hours: 8:30am - 5:15pm

Working Location: Boon Lay

Specific Responsibilities

• Standby support and 24/7 emergency call for customer support.
• Providing after-sales technical support, site recovery and maintenance responsibilities to distributors/end customers.
• Provide the installation, commissioning and on-site training to support the customers according to the scope of the project.
• Generate a service report to customer in a systematic manner.
• Investigate and handle all customers’ complaints related to product failures.
• Investigates root causes of failures and recommend solutions.
• Review and assist in determining the extend of damage and repairs of warranty claims from distributors.
• Maintain close working relationship with our key customers to ensure the follow through until the issue is resolved.
• Develop service training material, ensures all technical and training documents are up-to-date and organized.
• Provides specific training to distributors and dealers for service and troubleshooting skillsets, ensuring optimum service level at all distributors.

Qualifications / Requirements

• Diploma/degree in Electrical/Mechanical Engineering with at least 5 years of relevant experience
• This position requires fair amount of traveling in the Asia Pacific and Southeast Asia Region
• Possess strong customer service orientation, enthusiasm for power generation products, electrical and control system
• Candidates with equivalent professional background will be considered
• Prior electrical and control experience with various control system (John Deere ECU and KDI ECU) and synchronization system will be advantageous

Email: [email protected]

Tan Yong Zhi (Jackson) | Reg: R24124461

The Supreme HR Advisory Pte. Ltd | EA No: 14C7279

- 1 year Contract (Depend on job performance)

- $3000-$4000 + Allowances

- Mon to Fri: 8am to 5.30pm

- Tuas Naval Base (Shuttle Service provided at Joo Koon)

Responsibilities:

• Monitor UPS (Uninterruptible Power Supply) systems.
• Preventive & Corrective Maintenance
• Carry out or assist in preventive maintenance of UPS systems to ensure optimal performance.
• Execute corrective maintenance when necessary to resolve system faults or alarms.
• Perform additional tasks as needed to maintain the operational integrity of the UPS systems.
• Perform technical assistance for different components and systems in power management and backup solutions.
• Standby for any activation or system issues.
• Able to respond to short notice and work irregular hours to meet ad-hoc job assignments.

Period:

• 1 year contract (Depend on job performance)

Location:

• Tuas Naval Base (Shuttle Service provided at Joo Koon)

Working Hours:

• Mon to Fri: 8am to 5.30pm (Must be able to respond to short notice and work irregular hours to meet ad-hoc job assignments)

Salary:

• $3000-$4000 + Allowances

Requirements:

• Higher Nitec in Electrical Engineering/ Diploma in Electrical/Electronics Engineering or equivalent
• Minimum 2 years of experience

Interested applicants, kindly email your detailed resume (MS Word format is preferred):

[email protected] (Reg No.: R2198469)

Please ensure that applications sent through email are no bigger than 1Mb.

We thank all applicants for your interest but regret to inform that only shortlisted candidates would be notified.

Success Human Resource Centre Pte Ltd (EA License Number: R24124163)

160 Robinson Road, #13-07/08/09 SBF Center, Singapore 068914

T: 6337 3183 | W: www.successhrc.com.sg

Assistant Operations Supervisor

Salary: $2, 500 - $3, 500
Working Days: Mon - Friday, 8.30am – 5.15pm
Location: Office - Kwong Min Road (Boon Lay) | Travel to site if required

Operational Support:

• Coordinate and prioritize team activities to ensure smooth operations and timely issue resolution.
• Optimize resource utilization including manpower, equipment, and energy to enhance operational efficiency.
• Prepare comprehensive reports on Preventive Maintenance completion, including details on equipment lifecycle, recommended parts replacement.
• Document any parts that were replaced during PM or on Ad-Hoc Basis
• Update the equipment list monthly during the execution of Preventive Maintenance activities
• Ensure that end-end process of procurement of require Parts for maintenance is ordered.

Customer Relationship Management:

• Assist in maintaining strong relationships with customers, dealers, and distributors.
• Collaborate with the Account Manager in addressing key customer complaints and conducting satisfaction investigations to implement improvement plans.
• Conduct training sessions for technicians, customers, and dealers/distributors on the operation and maintenance of Commercial Kitchen Equipment.

Team Management:

• Assist in training technicians as necessary to meet workload demands and quality standards.
• Supervise and manage a team of service technicians and in-house subcontractors.

Contract Management:

• Support in managing contract commitment in terms of KPI (Critical Equipment Reliability; CM Completion Rate; PM Completion Rate, Emergency Response SLA; Hygiene Audit; Compliance to Fire Safety, WSH, GRA and Security Access Requirement; Service Quality Survey).

Health, Safety, and Compliance:

• Drive EH&S initiatives, promote EHS awareness, and monitor compliance within the team.

Performance Metrics:

• Collaborate with the Account Manager to track and improve KPIs such as productivity, field expenses, and Aftermarket Service Sales revenue/margins.

Job Requirements:

• Diploma in Mechanical/Electrical/Electronic Engineering or equivalent practical experience.
• With experience in a similar supervisory role within Aftermarket Service Industry
• Proficiency in Microsoft Business Central or similar tools.
• With understanding of EH&S standards and practices.
• With experience in conducting training sessions for technicians, customers, and dealers/distributors on Commercial Kitchen Equipment

The Supreme HR Advisory Pte Ltd | 14C7279

Ong Boon Kiet (Travys) | R22104769

Senior Recruitment Consultant

Overview:

A Solar Engineer specializes in the design, installation, maintenance, and optimization of solar power systems. Their role is pivotal in the shift toward sustainable energy solutions, as they work on both small-scale residential projects and large-scale solar farms. Solar engineers combine knowledge of engineering, physics, and environmental science to ensure solar energy systems are efficient, reliable, and economically viable.

Key Roles & Responsibilities:

• Design and engineering for Rooftop PV Systems.
• Attend site survey to verify roof layout and SLD’s as per the site.
• Design and engineering of On-Grid, BESS system.
• Design PV Layouts, SLD’s and other drawings etc.
• Design cable trunking and cabling routes and drawings.
• Design PV System according to Local code of practise SP, SCDF, JTC, and relevant authorities.
• Software Knowledge: AutoCAD 2D and PVsyst,
• Coordinate with Project management team to verify design and actual installation works.
• Provide engineering support as needed to the project development and project management team.

Required Qualifications:

1. Education:

• Diploma or Bachelor’s degree in Electrical Engineering, Mechanical Engineering, Renewable Energy, or a related field.

2. Technical Skills:

• Proficiency in solar design software (e.g., PVsyst, Helioscope, or Aurora Solar).
• Strong understanding of electrical systems, power distribution, and energy storage.
• Knowledge of local and international codes and standards related to solar power (e.g., NEC, IEC).
• Experience with AutoCAD or other design tools.

3. Soft Skills:

• Strong problem-solving abilities and attention to detail.
• Good communication and teamwork skills to collaborate with multidisciplinary teams.
• Ability to manage multiple projects simultaneously.

4. Experience:

• 2-5 years of experience in the solar industry or renewable energy sector.
• Previous experience in project management, system design, or solar installation.

Work Environment:

• Location: Solar engineers may work in offices for design and planning, but they also spend time on-site for installation and inspections.
• Travel: Frequent travel to project sites may be required, especially for large-scale installations.
• Working Conditions: Some fieldwork may involve working outdoors, often in varying weather conditions, and can include climbing roofs or accessing elevated areas for solar installations.

Certifications (Optional but Advantageous):

• Safety Certifications related to construction, electrical work, lifting and Working at Height.

Jobscope

• Install and configure gas detection systems at customer sites.
• Assess and determine the best locations for sensors.
• Regularly maintain and calibrate gas detection equipment to ensure accuracy.
• Perform preventive maintenance to avoid equipment breakdowns.
• Diagnose and fix issues with gas detection systems, including hardware and sensor problems.
• Repair or replace faulty components.
• Provide on-site and remote support to customers for system issues.
• Train customers on the correct use and maintenance of equipment.
• Other ad hoc duties assigned by supervisor

Requirements

• Min. Diploma in Electrical/ Electronic/ Process Instrumentation / Mechatronics Engineering
• Experience in oil & gas or process industries as training will be provided
• Min 3 years’ experience in service/engineering position in Oil & Gas / Process industry.
• Knowledge in Electrical & instrumentation is preferred
• Possess a valid class 3 license

Interested candidates, do submit your resume to [email protected] or telegram @alexgohhl

➖

Alex Goh Hock Leong

(CEI.No: R1763413 l Recruit Express Pte Ltd (Healthcare & Life Science) | 99C4599)

[email protected]@recruitexpress.com.sg

Tricia Celestine Goh (R1981653)

Recruit Express Pte Ltd | Company Reg. No. 199601303W | EA License Number: 99C4599

Our client is a local company, one of the leading Environmental Services provider. They are looking for a Business Development Executive to assist their Sales team for the next phase of their business. They are located in West.

Duties of Business Development Executive:

• Conduct tender site visits, prepare proposals, and deliver sales pitches to potential clients.
• Identify and pursue tender opportunities; aim to exceed revenue targets and maximize margins.
• Build client relationships, manage budget negotiations, and develop winning strategies for RFPs and Bids.
• Monitor industry trends to capitalize on opportunities and address risks in Environmental Services and Integrated Facilities Management.
• Enhance service offerings based on client needs; ensure retention through strong relationship management and responsive support.
• Collaborate with account managers and trainers to uphold customer service standards and improve loyalty.
• Compile monthly sales/tender reports and contribute to management meetings on business development.
• Coordinate with Operations, HR, Finance, Procurement, Technology, and Safety to support business objectives.

Requirements:

• Minimum 1 year experience
• Minimum Diploma in any discipline
• Comfortable to work in fast-paced environment

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv. We regret that only shortlisted candidate will be notified.

Email address: [email protected]

Recruitpedia Pte. Ltd.

EA License No. 19C9682
EA Reg. No. R24124884 (Tham Wei Sik)

The Write Connection (TWC) specialises in English and Writing classes for primary and secondary level students. With a team of over 100 dedicated professionals, our mission is clear: to nurture generations of critical, compassionate thinkers. We are committed to delivering exceptional, well-rounded English enrichment that empowers our students to succeed academically and beyond.

Our Customer Service Officers (CSOs) play a pivotal role in upholding our commitment to excellence. As the first point of contact, CSOs deliver outstanding service by leveraging their product knowledge and communication skills to exceed customer expectations. In this role, you'll provide personalised support, build lasting relationships, and contribute to a positive, collaborative team environment.

If you’re passionate about customer engagement, thrive in a dynamic setting, and are eager to make a difference, we invite you to join our team. Apply today for a fulfilling career where excellence and teamwork are at the heart of everything we do!

Job Responsibilities

Sales & Leads Management

• Confidently share information about TWC programmes with current and potential customers to achieve the centre’s sales target.
• Identify customer needs and recommend the most suitable programmes to enhance their experience and satisfaction with TWC programmes.
• Proactively follow up on leads, arrange trial lessons, and assist customers in signing up for programmes.
• Respond to phone, email, and walk-in queries promptly and effectively.
• Actively participate in marketing promotional events, campaigns and outreach efforts to boost TWC programmes’ visibility and drive enrolments.

Customer Service

• Deliver outstanding customer service by promptly addressing inquiries, resolving concerns efficiently, and escalating complex issues when necessary to ensure timely resolution.
• Maintain a cheerful, professional demeanor in all interactions, fostering a welcoming environment where customers feel valued and supported.
• Actively listen to customer feedback and share valuable insights with the team to help improve our service offerings and delivery.
• Stay well-informed on the latest programmes and marketing updates to provide accurate and up-to-date information to the customers.
• Go the extra mile to make sure customers are satisfied and their needs are fully met.

Administrative Support

• Utilise company tools and systems to manage and track customer interactions, ensuring accuracy and timely responses.
• Maintain organised, accurate, and up-to-date records of customer interactions, follow-ups, key activities, and relevant data.
• Handle day-to-day administrative duties, such as scheduling student classes, managing enrolments, processing invoices, and ensuring accurate registration and enrolment data.
• Collaborate with team members to streamline processes and contribute to the continuous improvement of administrative efficiency.
• Provide assistance to teachers and students as needed, ensuring a positive experience for all.
• Other duties associated with the role and assigned by the line manager.

Work Hours

As a Customer Service Officer, you’ll benefit from a structured 5-day workweek, including one weekend day, designed to support a healthy work-life balance. Here’s what a typical week looks like:

• Weekdays: 12:30 PM to 9:30 PM (inclusive of a one-hour meal break)
• Saturday or Sunday: 8:30 AM to 6:30 PM (inclusive of a one-hour meal break)
• Days Off: Enjoy one weekday and one weekend off each week.
• Team Collaboration: Participate in an engaging, collaborative 2-hour team meeting each week to brainstorm, share insights, and grow together.

Work Location

Experience the variety and flexibility of working across multiple locations! While your primary work location will be based on operational needs, we value your preferences. We’ll carefully consider your preferred centers when determining your final placement, ensuring a work environment that suits you best.

Job Requirements

• Minimum GCE 'O' levels qualifications.
• At least 1 year of experience in customer service-related roles, preferably in an enrichment or education-related setting.
• Proficiency in using MacBook and G-Suite applications (e.g., Drive, Gmail, Docs, and Sheets).
• Strong communication skills in English, both spoken and written, with keen attention to detail.
• Sales experience or a proven track record of meeting sales targets is an advantage.
• Demonstrated excellence in customer service with the ability to handle customer needs effectively and efficiently.
• Demonstrates strong work ethics, including integrity, professionalism, and a commitment to excellence.
• Positive, approachable, and professional demeanor with excellent listening skills.
• Ability to work independently while also thriving in a collaborative team environment.
• Flexibility and willingness to work at different centers based on operational needs.

What we offer:

• Competitive remuneration
• Performance-based incentives.
• Opportunities for professional development and growth within the company.
• Be part of a vibrant, dynamic and collaborative team that fosters innovation, excellence, and a shared commitment to making a difference in education.

Staff Benefits:

• Comprehensive Medical and Dental benefits
• Birthday and Marriage leave
• Flexi Leave upon completing 1 year of service.
• Monthly Birthday celebration
• Team Bonding Activities
• Exclusive Staff discount for TWC lessons (50% off course fee for children of staff)
• Exclusive Staff discounts with various participating merchants

The Write Connection (TWC) specialises in English and Writing classes for primary and secondary level students. With a team of over 100 dedicated professionals, our mission is clear: to nurture generations of critical, compassionate thinkers. We are committed to delivering exceptional, well-rounded English enrichment that empowers our students to succeed academically and beyond.

Our Customer Service Officers (CSOs) play a pivotal role in upholding our commitment to excellence. As the first point of contact, CSOs deliver outstanding service by leveraging their product knowledge and communication skills to exceed customer expectations. In this role, you'll provide personalised support, build lasting relationships, and contribute to a positive, collaborative team environment.

If you’re passionate about customer engagement, thrive in a dynamic setting, and are eager to make a difference, we invite you to join our team. Apply today for a fulfilling career where excellence and teamwork are at the heart of everything we do!

Job Responsibilities

Sales & Leads Management

• Confidently share information about TWC programmes with current and potential customers to achieve the centre’s sales target.
• Identify customer needs and recommend the most suitable programmes to enhance their experience and satisfaction with TWC programmes.
• Proactively follow up on leads, arrange trial lessons, and assist customers in signing up for programmes.
• Respond to phone, email, and walk-in queries promptly and effectively.
• Actively participate in marketing promotional events, campaigns and outreach efforts to boost TWC programmes’ visibility and drive enrolments.

Customer Service

• Deliver outstanding customer service by promptly addressing inquiries, resolving concerns efficiently, and escalating complex issues when necessary to ensure timely resolution.
• Maintain a cheerful, professional demeanor in all interactions, fostering a welcoming environment where customers feel valued and supported.
• Actively listen to customer feedback and share valuable insights with the team to help improve our service offerings and delivery.
• Stay well-informed on the latest programmes and marketing updates to provide accurate and up-to-date information to the customers.
• Go the extra mile to make sure customers are satisfied and their needs are fully met.

Administrative Support

• Utilise company tools and systems to manage and track customer interactions, ensuring accuracy and timely responses.
• Maintain organised, accurate, and up-to-date records of customer interactions, follow-ups, key activities, and relevant data.
• Handle day-to-day administrative duties, such as scheduling student classes, managing enrolments, processing invoices, and ensuring accurate registration and enrolment data.
• Collaborate with team members to streamline processes and contribute to the continuous improvement of administrative efficiency.
• Provide assistance to teachers and students as needed, ensuring a positive experience for all.
• Other duties associated with the role and assigned by the line manager.

Work Hours

As a Customer Service Officer, you’ll benefit from a structured 5-day workweek, including one weekend day, designed to support a healthy work-life balance. Here’s what a typical week looks like:

• Weekdays: 12:30 PM to 9:30 PM (inclusive of a one-hour meal break)
• Saturday or Sunday: 8:30 AM to 6:30 PM (inclusive of a one-hour meal break)
• Days Off: Enjoy one weekday and one weekend off each week.
• Team Collaboration: Participate in an engaging, collaborative 2-hour team meeting each week to brainstorm, share insights, and grow together.

Work Location

Experience the variety and flexibility of working across multiple locations! While your primary work location will be based on operational needs, we value your preferences. We’ll carefully consider your preferred centers when determining your final placement, ensuring a work environment that suits you best.

Job Requirements

• Minimum GCE 'O' levels qualifications.
• At least 1 year of experience in customer service-related roles, preferably in an enrichment or education-related setting.
• Proficiency in using MacBook and G-Suite applications (e.g., Drive, Gmail, Docs, and Sheets).
• Strong communication skills in English, both spoken and written, with keen attention to detail.
• Sales experience or a proven track record of meeting sales targets is an advantage.
• Demonstrated excellence in customer service with the ability to handle customer needs effectively and efficiently.
• Demonstrates strong work ethics, including integrity, professionalism, and a commitment to excellence.
• Positive, approachable, and professional demeanor with excellent listening skills.
• Ability to work independently while also thriving in a collaborative team environment.
• Flexibility and willingness to work at different centers based on operational needs.

What we offer:

• Competitive remuneration
• Performance-based incentives.
• Opportunities for professional development and growth within the company.
• Be part of a vibrant, dynamic and collaborative team that fosters innovation, excellence, and a shared commitment to making a difference in education.

Staff Benefits:

• Comprehensive Medical and Dental benefits
• Birthday and Marriage leave
• Flexi Leave upon completing 1 year of service.
• Monthly Birthday celebration
• Team Bonding Activities
• Exclusive Staff discount for TWC lessons (50% off course fee for children of staff)
• Exclusive Staff discounts with various participating merchants

• Working hours 8.30 am to 5.30 pm, Mon to Fri.
• Medical and Dental Claim
• Performance Bonus & 13 months
• Annual Leave 14 days

Responsibilities:

• Provide comprehensive support to corporate clients, managing orders and inquiries from start to finish.
• Oversee distributor relations, focusing on procurement and customer service.
• Prepare quotations and necessary documentation to customers.
• Keep updating pricing data & order status for clients reference.
• Collaborate with clients/logistics forwarders/ and other departments to ensure smooth operations.
• Address customer inquiries shortly.
• Work closely with internal departments (sales, warehouse, engineers) to resolve customer issues and implement effective solutions.

Requirements:

• Diploma with 2+ years of relevant experience.
• Strong communication skills.
• Works well under pressure

Aurora Asia Pacific (21C0671)|Ying Kee (R21103783)

Geographical Coverage: ASEAN

Summary of Role

Service Line Sales Specialists (SLS) provide deep expertise in a Service Line Practice Area to support the Client Leadership Team to close new and expansion opportunities on accounts. They are actively involved in growing the service line’s footprint and assisting the Client Partners to engage clients with service line opportunities. SLS are trusted advisors with a good mix of strategic and tactical management experience.

SLS Managers (SLS M), in addition to performing an SLS role themselves are also expected to lead a team of 2-3 SLSes. SLS M is required to provide oversight on the activities of the SLS, become the escalation point or the single point of contact for the Markets and SPE Leadership for the Geography.

SLSMs are required to track the financial performance of the SLS team for the Geo in terms of the prescribed performance metrices such as Bookings, Revenues, Renewal size as determined from time to time.

In this role, the SLSM will focus on Cognizant Custom Software Engineering services that are catered to by the Software and Platform Engineering Service Line. This includes “Digital Engineering (DE)“, “Application Development & Management (ADM)” and “Quality Engineering & Assuarance (QEA)” Service Lines. The SLSM will balance client/project responsibilities with business development and sales responsibilities including identifying, qualifying and closing new business opportunities in DE, ADM & QEA. The SLSM should be a highly client facing, dynamic, results oriented, experienced DE, ADM & QEA field sales executive keen to be part of a results-oriented culture accelerating digital change for our large, complex clients.

The SLSM needs to be highly client facing and should spend most of their time driving client conversations leading to sales. The SLSM also work collaboratively and team up with Pre Sales/Practices, Solution Architects, Offerings and Delivery leaders to ensure that all services and value adds from SPE are represented to the client in a very convincing manner.

Role Responsibilities

Market Leadership:

• Creates sales strategies and plan for the Client Partners’ review and for its incorporation into the broader client strategy and plan.
• Provides subject matter expertise to proposal development and overall solution.

Relationship Management:

• Executes and manages the account plan within function/specialism under the guidance or collaboration of the Markets i.e. Client Partners, CRMs etc.
• Should be the go to person for Client Partners and CRMs to call upon should an opportunity that is relevant to SPE is identified
• Invests time in strengthening existing client relationships. Participates in reviews and provides educated and relevant perspectives.
• Client Relationship Management; engage with CXO, VP and Director level clients

Business Development:

• Responds to and deliver on client requests; responds to RFP’s
• Identifies opportunities, makes proactive proposals to client in line with account strategy
• Obtains the approvals to pursue opportunities
• Leads pursuits to close new and expansion opportunities related to their sales specialisms, working closely with Client Leadership Team
• Secures revenue renewals related to their sales specialisms
• Engages the relevant internal Cognizant teams and service lines team for developing solutions
• End to end account management including account forecasting, budgeting and operations
• Drive RFP responses as well as proactive sales leading to revenue acceleration. Be able to spot opportunities
• Ability to sell both T&M as well as Fix Fee work involving end to end digital transformation involving run and operate of Legacy Estate, Transformation to the new digital core and Quality Engineering
• Handles risks and issues related to the account, including delivery oversight
• Creates and presents account QBR presentations and executive status reports

Job Requirements

• 12-15+ years of experience in a senior-level consulting client-facing role or account manager leadership role
• Should have led a Sales organization of 5-10 associates and should be able to track business performance, manage escalations and lead teams
• Ability to become a trusted advisor of the client who can understand client aspirations, pain points etc. and orchestrate the right capabilities within Cognizant to establish credibility with the client
• Knowledgeable in selling DE, ADM & QEA services in the market.
• Understands how to capture client pain points and provide detailed. guidance to the other teams for e.g. Pre Sales, Practice, Solution Architects etc. in terms of how to construct a differentiated proposition
• Strong experience in direct interaction with customers in the local market
• Ability to drive and orchestrate conversations with point of view to CxO and Head of Digital and/or Technologies
• Should have led sales pursuits in the past with the ability to size up deals
• Should be knowledgeable in cross-industry use cases for SPE
• Strong knowledge of the relevant partner ecosystem and the ability to collaborate within the ecosystem
• Recent experience working for IT professional services or management consulting firm(s)
• Recent experience managing global service delivery model(s)
• Excellent problem solving, business communication (written & oral), and client management skills are essential
• Experience developing opportunity pipelines, qualifying high priority deals, and winning new business in line with agreed targets
• Experience closing sales with a specific emphasis on growing sales. Specifically, win new deals in customer account per pre-agreed targets.
• Proven leadership qualities such as conflict/issue resolution, strategic and critical thinking and ownership, particularly with highly diverse teams
• Ability to work collaboratively in a virtual and highly-matrixed environment
• Cloud, Legacy modernization, Modern Engineering (Full Stack Engg, SRE and SDET), AI and Automation experience and knowleage are preferable.

Job Benefits:

• Competitive salary package
• 5-day work week
• On-the-job training provided
• Medical and insurance coverage

Job Responsibilities:

• Perform routine maintenance, troubleshooting, and repair of drink vending machines to ensure optimal performance.
• Diagnose and rectify electrical faults and system malfunctions promptly.
• Conduct preventive maintenance to minimize machine downtime and ensure reliability.
• Coordinate with the operations team to ensure timely servicing and machine replenishment.

Job Requirements:

• Basic electrical knowledge or background is required.
• Prior experience in equipment servicing or repair will be an advantage.

Please submit your updated resume in MS Word format via the "Apply Now" button.

We regret that only shortlisted candidates will be notified.
StaffKing Pte Ltd (20C0358) | Stanley Chin (R24124684)

The Write Connection (TWC) specialises in English and Writing classes for primary and secondary students. Our mission is to nurture critical, compassionate thinkers and empower students to excel academically and beyond.

Our Customer Service Officers (CSOs) play a key role in delivering exceptional service. As the first point of contact, you’ll use your product knowledge and communication skills to provide personalised assistance, build strong relationships, and contribute to a positive team environment.

If you’re passionate about customer engagement and thrive in a dynamic, supportive setting, we’d love to have you on our team!

Job Responsibilities

Sales & Customer Service:

• Greet and assist customers in a friendly and professional manner.
• Maintain a positive and professional attitude while actively listening to customer needs and providing relevant assistance.
• Provide accurate and up-to-date information about the company's programmes.
• Handle customer inquiries and requests timely, including scheduling replacement lessons and responding via phone, email, and chat.
• Follow-up with customers through calls and emails, to ensure customer satisfaction and escalate issues when necessary.
• Stay informed about company programmes and marketing initiatives to effectively communicate relevant information and promotion to customers.

Administrative Tasks:

• Utilise company systems to track customer interactions, ensuring accuracy and timely responses.
• Assist with administrative tasks such as preparing lesson materials, sorting worksheets, conducting stock checks, and maintaining accurate customer records.
• Support teachers and students as needed to ensure smooth class operations and a positive experience.
• Other duties associated with the role and assigned by the line manager.

Job Requirements

• Minimum GCE 'O' Levels; tertiary students, stay-at-home parents, and retirees are welcome to apply.
• No prior experience required; experience in customer service, sales, or administrative roles is a bonus.
• Strong verbal and written communication skills in English, with the ability to engage with customers professionally and effectively..
• Basic proficiency in computer applications (e.g., Google Drive, Gmail, Docs, and Sheets) and the ability to quickly learn company systems.
• A genuine desire to assist customers, with the ability to listen actively and provide effective support.
• Detail-oriented with the ability to manage multiple tasks efficiently.
• Comfortable promoting the company’s programmes.
• Works well independently and in a team.
• Available for flexible hours, including weekends, and willing to work at different locations if needed.
• Positive, professional, and proactive mindset.
• Possess good work ethics, including integrity and a commitment to excellence.

Work Schedule & Hours

1. Flexible work arrangement, depending on your availability and center manpower's needs
2. Work hours on weekdays: 2.30pm to 9.30pm (inclusive of one hour's meal break)
3. Work hours on weekends: 8.30am to 6.30pm (inclusive of one hour's meal break)

Work Location

Work location will vary based on operational needs. Flexibility to work at different centers is required.

Contract & Remuneration

• Contract For Service; No staff benefits & CPF
• Hourly rates: $12 - $15 (Depending on qualification, work experience and commitment to work on weekends)