College of Interdisciplinary & Experiential Learning

Many of the wicked problems in society today require interconnected and interdependent perspectives and collective collaboration. We enable students to thrive in a VUCA world by equipping them with interdisciplinary & experiential learning tools and processes, enabling students to synthesise knowledge from multiple disciplines to address complex issues. Above all, we deepen students’ socio-cultural competence and social responsibility to the local and global community through sustainable, reciprocal engagement with partners on real-world issues.

Office of Service-Learning

The Office of Service-Learning (OSL) seeks a purpose-driven individual for an impactful role facilitating meaningful learning between students and communities for social good.

You will support the delivery of SUSS Service-Learning courses and programmes, connecting SUSS students, alumni, faculty, staff and communities.

We seek a team player who possesses a deep understanding of the intersection between education and social sectors, knowledge of current and emerging practices, trends and opportunities within and beyond these sectors, and is committed to leveraging the university as a community asset to connect diverse stakeholders to journey together for shared purpose.

Major Duties & Responsibilies

• Identify and connect assets to develop and sustain partnerships with internal and external partners to co-create and curate Service-Learning opportunities; and capacity-building to deepen and strengthen stakeholders’ collective capability for social responsibility.
• Deliver Service-Learning credit-bearing courses and non-credit bearing programmes.
• Coordinate collaborations between OSL and SUSS schools and departments.
• Coach, mentor, and assess students, enabling students to meet the learning objectives specific to the range of Service-Learning experiences.
• Design, develop and conduct risk assessment, and ascertain that the Service-Learning opportunities/environment are safe and conducive.
• Design, develop and conduct translational research and solutions (if required).
• Develop and manage certification programmes in specialist domain areas (if required).
• Manage the administrative duties (pre and post event publicity, data management, procurement etc.) generated in fulfilment of the scope stated above.
• Assist with other tasks and duties as assigned by immediate supervisor, and participate in university-wide activities.
• Attend training and development courses relevant to work and/or personal development.

Job Requirements

• A good university degree, preferably with postgraduate degree and/or professional qualification, where relevant.
• Strong experience in asset-based approaches to Service-Learning and Community Engagement, Volunteer Management and Student Leadership Development.
• Intellectually inquisitive, with a good understanding of global and local trends in both the social sector, and Service-Learning and community engagement.
• Passion for working with students and community. Able to build rapport, motivate and inspire students from diverse backgrounds.
• Strong analytical, communication, networking and presentation skills.
• A resourceful team player with initiative and interpersonal skills, and a high level of integrity.
• Meticulous, enjoy working in a fast-paced environment, interacting with people and managing multiple tasks.
• Experience in teaching, curriculum design and development, educational equity and access, diversity and inclusion, social entrepreneurship, social innovation, sustainability, social impact measurement, social sector internships and/or applied research will be an added advantage.

Position Summary

The primary responsibility of the System Application Engineer is to provide technical support to Q-SYS’s Systems Direct Dealers, Systems Integrators and Distributors in the Southeast Asia territory, and if necessary, support other markets across APAC. Occasional business travel within the region may be needed.

The position will provide systems technical support services and training to our channel partners, consultants, and prospective users within the AV integration community.

Essential Functions/Core Duties

1. Post-Sales hardware and software issue resolution
2. Pre-Sales system design and specification

This position requires broad and comprehensive experience in Audio, Video and Control (AVC) Systems Integration over a wide range of market segments including Corporate AV applications, including networking, telephony, video conferencing and control implementation, Entertainment Venues, Transportation and Higher Education projects.

The candidate must be able to:

• Develop an in-depth knowledge of the organization’s products, policies and practices.
• Diagnose complex integrated system issues and provide solutions and advice.
• Manage sensitive information, both commercial and technical, discreetly and confidentially.
• Work professionally at all levels of employees and interface well with external professionals, end users, consultants, distributors, dealers and systems integrators.
• Demonstrate exceptional communication, presentation and teamwork skills.

Core Duties and Responsibilities - Training and Seminars

The candidate must be able to:

• Present and deliver various Q-SYS technical training courses.
• Present and deliver Q-SYS product and solution seminars.
• Comfortable presenting to a small to medium size audience

Job Requirements & Qualifications

• Education to degree level or qualification in industry relevant field
• Minimum 5 years’ experience in the professional AV industry or associated industries
• Experience as a AVC Systems Engineer, Contractor and/or Consultant are highly desirable.
• Experience with third party control integration (Crestron, AMX, etc.) is highly desirable.
• Experience with LUA scripting or similar is highly desirable.
• Experience in Cinema installations is a plus.
• Proven track record of delivering a clear and consistent market message for a solution-based product portfolio.
• Proven track record of working independently.
• Must be fluent in English. Other Asian languages are desirable.
• Audio Visual industry certifications in CTS, CTS-I, or CTS-D are a strong plus.
• IT industry networking certifications such as CCNA or CCDA, Q-SYS Level 2 and Quantum are highly desirable.
• A working knowledge of EASE 4.0 is desirable.

Field Service Engineer

We are looking for experienced junior and senior full-time Field Service Engineers to provide End User Computing or Deskside support to Multinational companies in Singapore.

Job Responsibilities & Requirement:

Primary

• Provide level 2 End User Computing support and well verse in Windows OS
• Good Hardware and software troubleshooting skills for PC.
• Break fix and IMAC support for end user deskside equipment
• Basic troubleshooting skills for IOS and android devices.
• Handles asset and peripherals inventory management.
• Meeting room and AV equipment knowledge.
• Provide smart hands support for networks and servers
• Able to support off hours or require to perform ad hoc duties as and when needed
• Familiar with Service Desk ticketing systems and process.
• VIP support
• Able to support off hours or require to perform ad hoc duties as and when needed

Job Requirement:

• Diploma/Bachelor’s degree in computer science / information technology or relevant field.
• Proven work experience as a desktop support engineer or support technician.
• At least 3 years of IT deskside support experiences for junior level.
• At least more than 6 years of IT deskside support experiences for senior level.
• A good team player.
• Excellent interpersonal skills.
• Customer centric and focus on service excellence.
• Excellent problem-solving and multitasking skills.
• Good verbal and written communication skills and ability to interact with other teams.

It would be appreciated if you can share with me your interest on the same.

Have a friend or family member who may be interested in taking the next step in their career? Help them out by referring them to Ennovatez.

You can email your resume to us at [email protected]

• 1) Shall ensure the daily operations of various sites assigned and liaise with clients on the requirements
• 2) Arrange for daily staff deployments to various sites and ensure company does not incur any liquidated damages on the projects
• 3) Rostering of monthly schedules
• 4) Coordinate with site in charge on backlog if any
• 5) Rectify on site issues with workers or clients upon receiving feedback
• 6) Reporting of daily attendance to head office and to submit and ensure timesheets are all in proper orders
• 7) Prepare monthly financial reports for various operations projects
• 8) Arrange for coverage in case of absence of staff and able to hands on in event of no coverage
• 9) Candidate must be independent and proactive to provide suggestions and solve problems with initiative
• 10) Candidate shall possess class 3 licence
• 11) Candidate shall respond to any business or projects assignment regardless of time in event of need

JOB DESCRIPTION

Professional in charge of commissioning the OTSAW Products including but not limited to Autonomous Mobile Robots (AMR) and Automated Guided Vehicles (AGV)

ROLES AND RESPONSIBILITIES

• Perform commissioning of OTSAW Products from system setup to route mapping and product operations testing.
• Execute upgrade and modification requests for an existing hardware or system via remote or on-site support.
• Train the Product Operators and Service Team in operating a newly setup system, equipping them with product operations and basic troubleshooting skills.
• Prepare and submit the User Acceptance Test, Progress Report, Project Report and other Operations related documents whenever necessary.
• Escalate critical concerns to Lead Project Engineer for prompt resolution, ensuring operational continuity.
• Execute tasks on behalf of the Robotics Operations Team, contributing to streamlined operations.
• Collaborate closely with the Lead Project Engineer to align objectives and achieve team goals.

SKILLS AND QUALIFICATIONS

• Bachelor’s degree in Mechanical/Electrical/Computer Engineering or other related fields is preferred.
• Associate’s degree in Mechanical/Electrical/Computer Engineering or other related fields is required.
• Possessing a relevant certificate or license is preferred.
• Proven work experience as Project Engineer or similar role.
• Strong background in engineering or technology industry.
• Familiarity with Autonomous Mobile Robots (AMR) and Automated Guided Vehicles (AGV) is advantageous.
• Proficiency in mechanical/electrical hardware installation, setup and troubleshooting.
• Proficiency in system/network installation, setup and troubleshooting.
• Proficiency in AutoCAD, ElcoCAD and any other design and planning software.
• Familiarity of LINUX (Ubuntu) System and software troubleshooting will be an added advantage.
• Ability to read and interpret mechanical / electrical prints and other related technical documentation.
• Strong working knowledge of equipment, tools and components used in the industry.
• Exceptional organizational and communication skills.
• Willingness to travel locally and internationally on short notice.
• Ability to work independently and remain professional under pressure.
• Possession of a valid driving license is preferred.

• Perform system performance test and evaluation and customer qualification focusing on vision inspection system.
• Evaluating and establishing vision system performance specifications.

Requirements:

• Diploma in engineering discipline
• At least 1 year of field servicing experience in semiconductor industry
• PC hardware, OS and networking knowledge

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Our client is a Global Manufacturing MNC, one of the leading players in the Oil & Gas servicing sector. Due to their current expansion plan, they are looking for a Design Engineer to join their team, in hopes of developing the current high performing team. They are located in the West.

Responsibilities:

• Responsible for the creation of innovative product designs and improvement/development to existing product designs.
• Regularly engages with third parties (e.g. customers, suppliers, vendors, etc), contributing to the technical specifications development.
• Responsible for various aspects of projects and collaborates with support teams to develop operational procedures.
• Management of engineering design modifications, involving the review as well as approval of engineering’s drawings.
• Proficient in appointed meetings to ensure the compatibility, interfaces, and functionality of relevant components within associated systems.
• Attends project meetings, where technical details are presented.
• All other ad-hoc duties as assigned.

Requirements:

• Minimum Degree in Engineering or equivalent
• Minimum 6 years’ relevant working experience
• Understanding of various industry standards and offshore operations

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Recruitpedia Pte. Ltd.

EA License No. 19C9682

EA Reg. No. R23115553 (Lai Hor Yan)

Field Applications Engineer

STAr-Quest Technologies is seeking for a Field Applications Engineer to support customers in SE Asia region.

Responsibilities:

• Provide on site installations and troubleshooting of probe cards for parametric and functional wafer level testing
• Provide pre-sales and post sales technical support
• Work closely with customers and HQ on technical issues and solution to address problem
• Generate incident reports and identify the steps to close issues
• Present findings and solution internally and externally
• Work in clean room environment

Employment Requirements:

• Education: Degree/Diploma in Electrical and Electronic Engineering or with relevant work experience
• Familiar with wafer test prober and automated test equipment
• Able to work under stress
• Possess good interpersonal and communication skill
• Excellent troubleshooting skill
• Fresh graduate with positive attitude is welcomed

TD Bank Group

Headquartered in Toronto, Canada, with ~95,000 employees around the world, the Toronto-Dominion Bank and its subsidiaries are collectively known as TD Bank Group (TD). TD offers a full range of financial products and services to over 27.5 million customers worldwide through four key business lines:

• Canadian Personal and Commercial Banking including TD Canada Trust, Business Banking, and MBNA
• U.S. Retail including TD Bank, America’s Most Convenient Bank, TD Auto Finance (U.S.), TD Wealth (U.S.) and TD’s investment in Schwab
• Wealth Management & Insurance including TD Wealth (Canada), TD Direct Investing, and TD Insurance
• Wholesale Banking including TD Securities and TD Cowen

TD had CDN$1.9 trillion in assets on July 31, 2023. TD also ranks among the world’s leading online financial services firms, with more than 16 million active online and mobile customers. The Toronto-Dominion Bank trades on the Toronto and New York stock exchanges under the symbol "TD".

Department Overview:

As a leading corporate and investment bank, TD Securities provides a wide range of integrated capital market products and services to corporations, governments and institutions. Our clients choose us for our knowledge, innovation and experience in the following key areas of finance, investment, corporate and government banking, capital markets, interest rate, currency and derivative products. Test Center of Excellence (TCoE) is a group focused on providing world class testing solutions and expertise on a global basis within TD Securities. Currently, the primary focus of the team is to deliver best in class testing services, tooling, and comprehensive test processes made readily available to all in TD Securities.

Position Summary:

As an Automation Quality Engineer, you will play a key role in both the key QE specific work you're doing throughout a project's lifecycle as well as contribute towards the automation solutions to support accelerated test execution. You will be required to provide analysis, design, execution, maintenance and / or support of testing solutions that are appropriate to the application, solution and project as assigned. You will report to, and take direction from, the QE Manager/Lead.

Responsibilities:

• Create test cases and traceability matrices based on business requirements documents and system design documents
• Contribute to and maintain team’s automation tool set
• Take an active role in all testing phases, receiving direction from the QE Lead/QE Manager and offering advice to the QE Lead/QE Manager, when needed
• Contribute to team’s internal knowledge base
• Work with JIRA for automation deliverables, test case management, defect management, test reporting, and other functions
• Participate in defect triage
• Report testing progress and defect metrics to the QE Lead/QE Manager
• Review and provide feedback on high-level automation requirements, business requirements, and testing documents

Job Requirements:

• Bachelor’s degree or equivalent in Computer Science or Software Engineering 2 to 5 years of prior experience as a QE Test Analyst
• Experience in Banking Domain is advantageous
• Proven ability to learn new technical and domain knowledge quickly
• Good analytical skills and attention to details
• Demonstrate passion for team and self-improvement
• Outgoing and self-motivated
• Experience/knowledge in the following:
• Behavior Driven Development, ATDD approach
• Test automation using JAVA
• Moven, Selenium Web driver, Appium and UFT/QTP is preferred
• Testing Microservices using RestAssured, SOATest is preferred
• Using source code control systems GIT / Subversion
• Implementing continuous integration. Experience with Jenkins or TeamCity preferred
• Experience in working with JIRA and an Agile environment
• Knowledge of QE methodologies and best practices

Inclusiveness:

At TD, we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. We are dedicated to building a workforce that reflects the diversity of our customers and communities in which we live and serve, and creating an environment where every employee has the opportunity to reach their potential.

Responsibilities:

• Transport waste materials
• Inspect vehicles for mechanical/safety issues and perform preventative maintenance
• Document and log work
• Report defects, accidents or violations

Requirements:

• Have experience as Truck Driver
• Minimum Class 4 driving licence
• No recent driving violations
• 6 days work week
• Location : Tuas

Responsibilities:

• Deliver prompt and efficient service to order processing via call centre hotline, email, sales order
• Perform accurate and prompt entry of orders in the system
• Ensure timely and accurate processing of orders received through the order hotline and faxes
• Ensure that critical information with regards to urgent delivery, special timing request are communicated and followed up with the delivery section till completion of delivery
• Ensure procedures for processing of item with sales restrictions, orders that require price approval and other principal specified requirements are strictly adhered to
• Provide admin support when necessary, e.g. filing, data entry, retrieval of documents

Requirements:

• GCE 'A' Level or Diploma
• Handle order processing via phone calls/emails

Should you be interested in this position, please contact Terence at +65 9645 4048 your resume directly for fast respond.

We regret to inform that only shortlisted candidates will be notified.

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

PERSOLKELLY Singapore Pte Ltd • RCB No. 200007268E • EA License No. 01C4394• Reg. R23116141 Le Cong Thang

• $4k - $6k + 2 months VB
• Career Stability
• New Projects/On-going Projects

My client is a A1 main contractor in Singapore is hiring multiple Senior/Project Engineer to join them.

Responsibilities:

• Manages all construction execution aspects, ranging from site preparations to the final build-out.
• Ensures that the construction, installation, and assembly of components, equipment, and construction systems align with the plans and design drawings.
• Generates construction progress reports in accordance with contractual terms, covering time, cost, and quality.
• Records action items and tracks follow-ups from project meetings.
• Facilitates regular inspections to ensure compliance with relevant regulatory and legislative requirements, as well as established processes and procedures.
• Drives a strong focus on safety and sustainability.

Requirements:

• Holds a degree in Civil Engineering, PE Board recognized is preferred.
• Is willing to work on-site
• Demonstrates the ability to work both independently and collaboratively, effectively coordinating among various disciplines and construction teams.
• Possesses strong technical aptitude and excels in problem-solving.

Other Information:

• Location : Projects Site (North/Central)
• Working Day : 5.5 days
• Salary : $4k - $6k + 2 months VB

For consideration, kindly submit your CV by clicking “APPLY NOW” or send your CV to the email: [email protected]

**Only shortlisted candidate would be notified**

MTC Consulting Pte Ltd | 15C7752

EA. Registration No.: R23116122 | Martin Hu

This is a 12 months contract assigned to our client

Work Location: To be confrimed

Salary Range : $4,000-$5,800

OutSystems

Act as software detectives, provide a dynamic service identifying and solving issues within multiple components of critical business systems.

Extensive Job Description:

To be a part of the Project Team to deliver a custom-built software application on a low-code platform by following Agile Frameworks and DevOps practices

Your Key Responsibilities

Working as an Agile Team Member, managing and executing a variety of tasks

Lead development projects using the OutSystems platform, ensure projects meet business requirements and goals, fulfill end-user requirements, and identify and resolve systems issues.

Optimize the OutSystems applications for maximum speed and scalability.

Attain a detailed understanding of the customer’s business needs and apply the OutSystems technology to meet those needs.

Interacting with Business Users as necessary to clarify requirements

Taking responsibility for the quality of the software developed and delivered

User Story Effort Estimation

Software Development including meeting the Definition of Done

Software Testing including fulfilling the Acceptance Criteria

Creating Software Documents as require

Skills And Attributes For Success

Contributing to setting-up, and execution of DevOps practices

Software Deployment

Software Maintenance and Support

To qualify for the role, you must have:

At least a degree or diploma in a relevant technical field

Familiarity with the whole web stack, including protocols and web server optimization techniques.

Experienced in Agile Software Development

Experienced in Web Applications, HTML, CSS and JavaScript

Experienced in Software Integration using APIs and Web Services

Experienced in Database Systems

Advanced knowledge of the OutSystems platform, with the ability to code and debug issues.

The MES Engineer II is responsible to provide reliable, customer orientated IT client services for the manufacturing line. To provide standardized services, executes client harmonization projects in close alignment with headquarter (HQ) and is responsible for MES applications and master data in the CRM manufacturing line.

Your Responsibilities

MES business focus and support MES Engineering function by building cross functional consensus and realizing solution through MES.

MES Development:

• Explore & develop enhancement of MES user experience & workflow.
• Apply MES business rule as main solution.

MES & SAP Master Data setup & maintenance:

• Serve as the liaison between business and engineering teams;gather and document requirements from end users.
• Material master data maintenance.
• Bill of material maintenance.
• Manufacturing routing & workflow maintenance.
• New product transfer from HQ.
• New product setup from R&D.

MES & SAP responsibilities:

• Conduct MES training for new user and during new release.
• MES roles assignment.
• Attend to MES 2nd level support case with in-depth analysis, able to liaise with HQ when alignment is needed.
• Lead the MES deployment roll out with HQ with compliance with validation & verification documentation.
• Support SAP interface testing.
• Support MES to machine interface development & testing.

Professional ethics:

• Team player with customer orientation.
• Able to listen and interact with users to collect their feedback and user behavior to improve MES handling, interface and user experience.
• Able to contemplate and act from a MES user perspective for problem solving.
• Able to share opinion and propose ideas to improve existing MES system and user experience

Technical Competency

Lean Manufacturing:

• Understand & utilize Poka-Yoke (Mistake Proofing), SMED & Standard work framework for corrective and containment action.
• Utilize FMEA (Failure Mode Effect Analysis), Fishbone diagram, 5S, 7-Wastes, Kaizen as a problem-solving tool.
• Understand the Kanban, Pull Production & Just-In-Time production logic and handling.
• Able to utilize mind mapping tools such as 5-Whys for basic root cause analysis.
• Able to apply to solve the complex problem and when needed.

Project Management & Continuous Improvement:

• Able to adapt JDI (Just-Do-It) and PDCA (Plan-Do-Check-Act) as project initiative to tackle issue.

Your Profile

• Bachelor’s Degree or Diploma in Computer, Computer Science, Information System Engineering or equivalent.
• Degree holders: At least 2 years of relevant working experiences.
• Diploma holder or equivalent: At least 8 years of relevant working experience in manufacturing system environment.
• Prior Manufacturing Engineering experience in medical device or pharmaceutical industry is preferable.
• Experience in Manufacturing Execution Systems (Camstar is a plus)
• Familiar with ISO13485, cGMP and Computer Software Validation is preferable.
• Familiar SAP, Business Intelligence tools is preferable.
• Basic skills in any programming script, like C#, VB, Java, Python etc.
• Basic skills in database, data reporting, XML.

Navneet Goel

[email protected]

EA License No. : 02C3423 | Reg No. R1982194

Purpose of the job:

The Lifting Engineer is mainly responsible to perform the coordination of vehicle delivery activity to site inclusive the transportation from port to site storage until lifting up to the LRT guideway. Support Pre and Post vehicle delivery/decommissioning lifting preparation and coordination activity for all vehicles to be lifted up or down to/from the guideway/viaduct.

Key Responsibilities:

Preparation and review (of existing) lifting documents/methods (both transportation and lifting activity)

Coordinate the delivery of the vehicles with offshore manufacturing and review/follow up on pre-shipment vehicle history book and all require vehicle documents.

• Following up on the process of vehicle lifting and ensuring all documents readiness prior lifting.
• To coordinate and arrange periodic lifting gears/tools inspection with the subcontractor/customer.
• To coordinate and conduct lifting resources planning (internally & externally with contractor).
• To coordinate and organise delivery meeting with the manufacturer and operator to harmonize the delivery handshake.
• To coordinate and organise lifting meeting with the customer and operator to harmonize the onsite lifting arrangement.
• To conduct safety assessment & discussion with EHS team (safety) for any latest safety policy and implement the safety requirement when needed.
• To periodically monitor and implement any procedural changes according to the local authority requirement/regulation updates.
• To periodically monitor and execute the lifting work improvement at lifting site inclusive all facilities/tools.
• To prepare and update the lifting procedure, delivery methods and to ensure that all the vehicle history book/ vehicle documents are clearly written and verified by the customer before the commencement of the work.
• To organise/attend customer meeting and/or presenting the delivery and lifting plan.
• To prepare risk assessment prior work commencement.
• lifting planning, weekly/bi-weekly work planning and able to handle critical situation with adhoc changes due to access issue.
• Pre-lifting work planning and follow up with subcontractor and customer.
• Post-lifting debrief and follow up with subcontractor and customer.
• Lifting Resources planning and optimisation.

Relevant experience required:

Typically, minimum 3 – 5 years relevant rolling stock testing experiences.

• University degree/Diploma in any relevant field of Engineering or equivalent technical qualification (for example, technicians/champions) in system-related sectors
• Qualified Appointed Person - Lifting Operations (certified Lifting Engineer)

Competencies:

• Communicative and client-oriented attitude
• Accurate and result oriented attitude
• Pragmatic
• Team player
• Responsible and works independently
• Decisive
• Flexible

Job Purpose

You will attend to phone/email enquiries from our customers, effectively maintaining our Contact Centre’s high level of accessibility and supporting the preparation and delivery of service requests for customers and distribution partners.

The Job

• Attend to enquiries and requests from phone calls/emails in a professional and prompt manner.

• Update complete and accurate information on customer interaction in the Customer Relationship Management (CRM) system.

• Ensure effective and timely follow-up as promised to customers.

• Alert management of issues and concerns that require escalation for complete resolution.

• Prepare effectively and accurately requests including but not limited to policy summary, premium paid, beneficiary information.

• Work closely with stakeholders on the service request requirements.

• Deliver service requests within stipulated service standards.

• Undertake projects or other responsibilities as assigned.

Requirements

Preferably ’A’ Levels or Diploma holder with relevant working experience.

Good interpersonal and communication skills.

Interested candidate please click "APPLY" to begin your job search journey and submit your CV directly through the official PERSOLKELLY job application platform - GO Mobile.

To ensure a faster shortlisting interview process, kindly text me at 96429153

We regret to inform that only shortlisted candidates will be notified.

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy.

PERSOLKELLY Singapore Pte Ltd • RCB No. 200007268E • EA License No. 01C4394• Reg. R23111945 Lim Soo Ching

• Plan and carry out preventive maintenance throughout the hotel to ensure that standards are maintained for guest comfort.
• Ensure the smooth daily operation in the department through supervision, delegation of duties and coordinate all engineering activities within the Hotel.
• Ensure the preventive/ corrective maintenance for all the hotel’s facilities are done promptly.
• Conduct routine checks and log data of all facilities, following up on faults and repair works if required.
• Perform property/ room preventive maintenance inspection and update.
• Perform incident investigation and prepares report.
• Assist in fire safety procedures within the Hotel
• Monitor the service and maintenance of all equipment and controls.
• Schedule preventive and corrective maintenance.
• Maintain the tidiness of the store, workshop and check on the tool inventory.
• Ensure that all spare parts are available for use whenever required and proper storage of supplies & materials.
• Maintain fire-fighting facilities and equipment in compliance to the Fire Safety regulation.
• Perform regular energy/ defect analysis and be involved in energy management.
• Keep up to date on safety-related administrative documents.
• Ensure his/her own safety and the safety of others during interventions and those of the external service providers.
• Be available to carry out emergency maintenance work outside of normal working hours, as required for: full power failure, evacuation fire system re-set and / or failure of mechanical systems.
• Maintain records of repair work and daily checks as required by the local Council, Government and Manufacturer specifications.
• Ensure the external areas of the hotel are neat and tidy and maintained in line with Company brand standards.
• Strive to honour the Accor Vision and demonstrate active use of Accor Values.
• Any other reasonable request within your range of competence as required by Management.

Koizumi Lighting Singapore Pte Ltd

An established Japanese lighting manufacturer.

In Singapore, we specialise in turnkey projects.

The role and responsibilities include, but are not limited to,

• To manage projects, monitor progress and ensure smooth completion.
• To coordinate the works of a multi-disciplinary workforce including consultants, external subcontractors and etc.
• To handle project risk management and issues escalation.
• To ensure safe work procedures and environmental control measures are implemented at work site.
• To provide project status update to management accurately and in a timely manner.
• To attend to maintenance issues during DLP.
• To prepare and manage tenders and quotations.
• To assists in products specification and datasheet.
• Any other ad hoc duties assigned by Manager.

Job Requirement

• Min. Diploma in Electrical / Electronic / Mechanical Engineering
• Min. 3 years’ experience as Project Engineer in construction industry
• Motivated to work in challenging, fast paced and result-driven environment
• Good communication and interpersonal skills
• Knowledge of lighting an advantage
• Knowledge of software an advantage, eg. Autocad, Photoshop, Dialux

Product training will be provided

About us

Dyson is a global technology enterprise. We solve the problems others choose to ignore, with surprising new inventions that defy convention and simply work better. We’re driven by progress and thrive on the challenge of relentless improvement. We’re growing fast and our ambition is huge – more categories, more locations and more people.

Our scale and rapid growth make Dyson rich in new opportunities. We value new ideas and diverse perspectives, so our people are trusted with real work and responsibility from the outset. You’ll develop fast and have the chance to move into different business areas and regions. And you’ll be part of a global network of like-minded people – a community that supports and learns from each other.

At Dyson we are encouraged to think differently, challenge convention and be unafraid to make mistakes. We’re creative, collaborative, practical and enthusiastic, but most of all we’re hugely passionate about what we do. We are looking for individuals who wish to invent, design and develop leading products for the global market. By working in our world class Research Design and Development department, these individuals have the opportunity to work alongside other leading technical specialists and highly motivated creative people, to develop products which fulfill our ambition of being truly different and better than our competitors.

About the role

We are looking for a Senior Research Engineer to join our growing team. The role will involve:

• Leading an electronics research project whilst mentoring graduates and team members.
• Reviewing relevant articles, papers and patents and meeting with suppliers to keep informed of emerging technologies.
• Designing, building, and testing demonstration rigs to prove feasibility of new technologies and products.
• Creating clear technical reports and presenting design details and expected performance to others.
• Working with a creative and methodical approach to problem solving.
• Work with the cross functional team to plan project work, assign tasks and take responsibility for project delivery.
• Identify and communicate technical risks and improvements in the way we work.

​About you

• Degree or equivalent experience in Electronic Engineering or comparable discipline.
• More than three years working experience in a relevant industry or research environment.
• Ability to work within a multidisciplinary team.
• Digital and analogue circuit design.
• Schematic capture and PCB design using Altium Designer, Mentor Graphics or other mainstream tools.
• Experience of C/C++ programming for embedded systems is desirable.
• Use of Matlab or Python for data acquisition and analysis.
• Use of SPICE based simulation tools such as Simetrix and LTspice.
• Experience of working in a laboratory environment. Use of lab equipment to set up experiments and to take precise measurements.
• Demonstrate strong communication skills, interpersonal skills, and the ability to work independently or in a team.
• Experience creating verification plans.
• Able to communicate complex ideas to a range of experts in different fields.

Benefits

Dyson Singapore monitors the market to ensure competitive salaries and bonuses. Beyond that, you’ll enjoy a transport allowance and comprehensive medical care and insurance. But financial benefits are just the start of a Dyson career. Professional growth, leadership development and new opportunities abound, driven by regular reviews and dynamic workshops. And with a vibrant culture, the latest devices and a relaxed dress code reflecting our engineering spirit, it’s an exciting team environment geared to fuelling and realising ambition.

EUC Engineer L2

Brief Description:

End-User Support, strong in supporting all Windows, iOS, and macOS systems, applications, and networking related.

Responsibilities

• Basic help desk resolution and service desk delivery.
• Routine System administrative activities
• Resolve incidents escalated by L1/Helpdesk as per the agreed SLAs and timelines. They usually have a Run-Book/KB which they can refer to for immediate resolutions. They are also supposed to coordinate with any other support or dependency groups in case the incident has any linkage.
• Troubleshooting for Alert logs files, transaction logs and backup logs.
• Troubleshoot End to End User Devices
• Run the backups, recovery errors, respond to the request regarding the restoration of the DB
• Responsible on making backup tapes schedule and changes.
• Monitor the metric alerts, performance-related issues like high CPU utilization, Application performance, high Memory utilization, Application tuning and Query.
• tuning
• Acknowledge the request for DB stop/start, user creation and grant specific data access to user.
• System upgrades/migrations
• Making sure Inventory is updated.
• Escalates the problem to next level/Vendor.
• Good working experience in iOS devices ( iPad, MacBook, & iMac )

Requirements

• Higher Nitec and above in Information Technology or related field
• Provide IT technical service desk and onsite support for end-user services
• Support desktops, notebooks, printers and other hardware components.
• Minimum 3 years of IT (EUC) relevant experience in Apple products, applications and networks.

Contract Type: 12 Months (Renewal)
Salary: SGD2,800 to SGD3,500
Location: East Coast, Punggol
Working Hours:
i. Mon – Fri 8:30 am to 4:30 pm (onsite), Sat 9:00 am to 1:00 pm. (onsite)
ii. Mon – Fri 10:00 am to 7:00 pm (onsite)
Commencement: Immediate

Job Types: Full-time, Contract

Contract length: 12 months

Salary: $2,800.00 - $3,500.00 per month

Schedule:

• Monday to Friday

Work Location: In person

Key accountabilities

Perform frontline operations that includes registration/appointment scheduling/referral booking and cashiering duties when needed:

1. Attend to Walk-In/phone enquiries
2. Perform chaperon activities and assist in explaining the procedures to patients
3. Support doctors in language translation when needed
4. Proper maintenance of patients’ records, including filings
5. Ensure proper management of drug inventory
6. Ensure proper maintenance of clinic facility for cleanliness and positive image
7. Adhere to SOPs and perform routine checks/audits within the clinic

Qualifications & Experience

• Minimum GCE 'N'/'O'/'A' Levels, NITEC or Diploma Holders
• Experience:
  1. Frontline customer service experience is an added advantage.
  2. Relevant work experience in the healthcare industry would be an added advantage.
  3. Experience in working with diverse groups of professionals/personnel.

Applicants who possess relevant experience for the above responsibilities are most welcome to apply. If you do not possess the above experience, your application will still be considered on individual merits and you may be contacted for other opportunities.

Interested candidates kindly click the APPLY NOW.

By submitting your personal data and/or resume, you give consent to the collection, use and disclosure of your

personal data and/or resume by the company (or its agent) for the purpose of the processing and

administration by company relating to this job application.

**We regret to inform that only shortlisted candidates would be notified. **

Amy Wong Siew Chen

Registration Number: R22108344

EA Licence No: 06C2859 (MCI Career Services Pte Ltd)

Job Description:

You will participate in the specification, design and design maintenance of high-tech mechanic system solutions for professional mechatronic equipment, and enable optimal functionality and cost effective engineering of those systems. You are a highly talented and ambitious engineer with a bachelor’s or master’s degree in engineering. VDL offers a dynamic working environment with opportunities to travel abroad. You will participate in the following phases for system (re)design projects:

• Quotation Phase: create a plan with scope, cost and lead time estimation together with the project team and the customer
• Feasibility phase: consolidate customer requirement specifications into an investigation of the feasibility of mechanical concepts
• Definition Phase: develop Description of System Design Requirements and Specifications
• System Design Phase: generation of system design concepts and reviews

1. Develop well-considered choices, validated against system requirements
2. Definition of high level modules and related technical interfaces
3. Monitor that projects stay within agreed specifications.
4. Make use of your creativity and helicopter view to find solutions in case of conflicts.

• Detail Phase: create 3-D models and drawings
• System integration and verification: verify design / the chosen concept on the requirements by means of functional models or (pre-)proto production
• Production release: release the design for production

Requirements:

• Bachelor’s or Master’s Degree in Mechanical Engineering, preferably with a focus on construction / precision mechanics
• Knowledge of mechanic design principles, accurate positioning, dynamic behavior, material properties, strength and stiffness
• User of 3D design tools (e.g. NX or SolidWorks)
• User of product lifecycle management systems (e.g. TeamCenter or EPDM)
• Basic knowledge of FEA calculations in the area of mechanical design
• Helicopter view, abstract thinking and ability to think out-of-the box
• An effective communicator
• Fluent in English, both speaking and writing
• Willingness to travel overseas and cooperate with the European mother company

Additional requirements for Senior Mechanical Design Engineer:

• At least 5 years of relevant working experience (semicon, precision mechanics, or similar)
• Deep understanding and experience in the different design phases ranging from conceptual design up to Proto- and Pilot evaluation
• Experience in multidisciplinary projects, knowing dependency between electrical, electromechanical and mechanical (sub)systems
• Proficient in stakeholder management (internal and external) to increase effectiveness and efficiency of the team

Job Summary

Imagine what you could do here. At Apple, new ideas have a way of becoming phenomenal products, services, and customer experiences very quickly. Bring passion and dedication to your job and there's no telling what you could accomplish! The success we are striving will be the result of very skilled people working in an environment which cultivates creativity, partnership, and thinking of old problems in new ways. If that sounds like the kind of environment that you find intriguing, then let's talk! We design, develop, and launch next-generation Sensor Technologies in Apple products. The Sensor Hardware team develops sensor solutions and technologies for a variety of Apple products such as iPhones, iPads, and Macs. The key goal of the Sensor Technology team is to enable the world’s best user-experience. New challenges arise every day that require the sharp problem-solving skills of hardworking and experienced individuals. Are you in for these challenges? The team features a collaborative and hands-on environment that fosters engineering excellence, creativity, and innovation. We are looking for Hardware Development Engineer with strong background in electrical design, characterization, data analysis, and system-level troubleshooting to help develop new optical sensors and sensing systems for future Apple products. Join us in crafting solutions the world doesn't know of yet.

Key Qualifications

• Multi-disciplinary understanding of electronics, basic optics, and general physics principles.
• Strong electrical engineering background in analog and mixed-signal system-level circuit design, especially board-level circuit
• Good knowledge of inter-module communications protocols (I2C, SPI, etc.)
• Hand on experience in hardware and circuit validation using lab measurement equipment (oscilloscope, analyzers, etc).
• Proficiency in scripting for modelling, automation, data acquisition, and data analysis (Matlab, Python, etc)
• Excellent written and verbal communication skills, and solid teamwork and leadership skills.
• Experience with production data statistical analysis and optical sensor systems mass production is a plus

Description

• Identify, implement, and document new optical sensing system metrics and specifications to deliver performance that matter to customer experience.
• Build lab bench and measurement automations to support design validation and characterization across all development phases.
• Analyze engineering and production data sets to validate system performance and design maturity.
• Lead failure analysis of optical modules and system integrations, driving corrective actions with cross-functional teams and suppliers.
• Author regular technical communications for executive and cross-functional briefings.
• Scope new optical sensing technologies and proof-of-concept investigations.
• Business travel to support product development and supplier teams as necessary.

Education

Degree in Electrical Engineering, Optics, or Physics. M.S/PhD, or B.S. with proven hardware development experience.

The KK Genetic Service is looking for a Genetic Counsellor to complement the work of doctors in the delivery of care to patients, who have a personal or family history of birth defects or genetic disorders, by providing information and support to these patients and their families. The Genetic Counsellor is also responsible for coordinating research projects carried out in the centre.

Job Scope:

• Conduct intake of information from patients, construct a complete pedigree, obtain appropriate medical histories, organize and present the pertinent medical and genetic information to the health care team.
• Apply his/her knowledge of genetics and genetic disorders to effectively convey genetic, medical and technical information to the patient.
• Identify family dynamics and emotional responses from the patient.
• Help patients understand the medical aspects of the genetic condition, as well as the psychological and familial implications of genetics.
• Provide patients with information on options that are available such as genetic testing, disease management and prevention, and facilitate the patient's decision-making in a non-directive manner.
• Provide patients with resources for support and opportunities in research programs existing in the medical community.
• Coordinate genetic testing for patients and families, including liaising with the respective genetic laboratories, arranging the testing, following up on results and discussion of results with patients.

Job Requirements:

• Master’s Degree in Genetic Counselling or equivalent
• Good communication and interpersonal skills
• Experience in counselling
• Proficiency with the use of IT

Job Description

• Comply with the local construction code and approved Quality document
• Assist project teams to identify quality requirements and develop Project Quality Plans for projects
• Conduct inspection reports for all subcontractors work to ensure alignment with the quality standards
• Assist Project Teams with control vendor performance/non-conformance issues and implement actions to correct non-compliance
• Prepare and submit Request for Inspection (RFI) to consultant prior to official QA/QC inspection and testing activity
• Carry out the execution of the project as per plan
• Register all incoming materials and items for the project
• Responsible for managing day to day lifting operations
• Plan, organize, supervise and liaise closely with sub-contractors and operation teams on all ongoing lifting activities
• Conduct routine checks and inspections of works on site to ensure compliance with authorities' and client’s requirements
• Review project safety (e.g. lifting plans, etc.)
• Other ad hoc duties as assigned

Job Requirements

• Degree in Civil Engineering or equivalent
• At least 5 years of working experience in the related field is required
• Ability to work with tight deadlines
• Work closely with project team to resolve technical issues
• Good attitude and communication skills
• Willing to multi-task
• Need to be stationed at site
• Willing to work 6 days at project site
• Location: East