Job Summary

The M&E QA/QC Engineer will assist QA/QC Manager in the M&E and piping works for Integrated Waste Management Facility project. He / She should have a proven track record with excellent communication skills and possess strong technical knowledge of mechanical, electrical, structural and piping systems installation, as well as substantial hands-on project quality documentation and turnover experience in the construction sector.

Job Description

• Conduct site Audit on the sub-contractor/vendor.
• Ensure that adequate equipment and facilities are provided for verification of product quality.
• Ensure that all controlled documents are administered effectively.
• Quality control of sub-contractors.
• Daily coordination of all site work activities on Piping, Equipment installation.
• Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.
• Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.
• Carry out verification of purchased products in vendor's premises as specified in contracts.
• Monitor and control quality of purchased products.
• Ensure identification and traceability of incoming, in-process finished products.
• Stipulate and control adequate criteria for workmanship.
• Monitor and control quality of special process performed.
• Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.
• Ensure that all inspection and test equipment are properly calibrated and controlled.
• Ensure that all nonconforming materials and products are adequately controlled.
• Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.
• Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.
• Ensure that quality records are properly stored and maintained.
• Define quality requirement for service and installation of products.
• Maintain adequate statistical techniques to control product and process quality.
• Compile Manufacturing Data Report (MDR).

Requirements

• Bachelor's degree in Mechanical, Electrical, or a related field.
• 5 years QAQC experiences in EPC projects.
• Knowledge in Inspection of Pressure Vessel, Piping, FRP tanks, Rotating equipment such as pumps, fans, agitators, etc.
• Knowledge in Non-Destructive Test such as RT, UT, PT, MT and able to interpret test results.
• Able to read, understand and interpret technical requirements, quality procedures, drawings, P&ID.
• Detail-oriented and have strong communication skills and able to work with people from all levels.
• Experiences in wastewater, desalination, water utility, incineration, power plant packages are preferred.
• Comfortable working within a fast-changing environment, ability to multi-task and cope with ambiguity.
• Strong communication and interpersonal ability, coupled with influencing skills.
• Strong verbal & written communication skills (English and preferably Mandarin)
• Independent and a self-starter, with strong personal drive to initiate and implement.
• Good knowledge of documentation procedures.
• Hands on experience with pressure vessel, PED & MOM requirements, EN standards
• Proficient with Microsoft Office such as Word, Excel and Power Point.
• Ability to multi-task and be flexible/adapt to rapidly changing project requirements/timelines.
• Meticulous and analytical with excellent problem-solving skills.
• Able to work under tight deadlines.

Qualifications & Requirements:

• Degree in Electrical / Electronics / Computer Engineering / Computer Science or a relevant discipline.
• Developed software in at least one full Software Development Lifecycle.
• Experience in writing Requirements Specification, Use Cases, Design Documentation, and designing software using object[1]oriented software design and UML modelling
• Good knowledge and experience in C++ on Embedded platforms (e.g. QNX, Vxworks, Embedded Linux).
• Experience in multi-threading, socket programming and serial/USB communication.
• At least 5 years’ experience in object-oriented software development.
• Experience in container development with docker in IoT devices.
• Prior experience in following areas Scrum AGILE methodology process is a plus: o Scrum AGILE methodology process o Develop and integrate embedded devices with cloud platforms o Develop and integrate vehicle side Information Technology for Public Transport (ITxPT) services, like GNSS and AVMS services. Strong analytical and problem-solving skills
• Good written and verbal communication skills
• Self-motivated, independent and a good team player

Responsibilities:

• Working in a team to design and develop a real-time, reliable and secured e-payment devices that processes millions of public transport commuters’ cards daily. The activities required to be performed shall include the following:
• Requirements gathering.
• Design and develop software applications for embedded devices.
• Implement and optimize communication protocols (e.g.TCP/IP, HTTPS, FTPS/SFTP, MQTT-S) to establish secure and reliable connections between embedded devices and on-premises/cloud platforms.
• Conduct thorough testing, debugging and troubleshooting of embedded devices to identify and resolve issues related to functionality, connectivity, performance and reliability.
• Preparation and submission of deliverables throughout the Software Development Lifecycles (SDLC) such as Business Rules, Software Requirement Specifications, Software Architecture Document, Design Specification, Interface Specifications, Source Codes, Testing Specification, Operation and Maintenance Manual, Training Manual and others documents as required in the SDLC processes.
• Assist day-to-day application support issues.
• Liaise with users on the requirement testing and production issues

Joining Arup

Arup’s purpose, shared values and collaborative approach has set us apart for over 75 years, guiding how we shape a better world.

The Fire Engineer will be working in a specialist team of experienced engineers covering a broad range of skills relating to the fire industry. This role should have completed fire engineering OR related tertiary studies or a professional with a skill that complements fire engineering that are able to bring knowledge of your discipline and the team.

The Opportunity

• Involve in all types of fire engineering design projects, providing detailed technical input across abroad range of projects within the fire engineering business and related areas.
• Undertake the design, engineering, and documentation, provide specialist input, resolve technical problems, and ensure quality of products and services on projects.
• Ensure own work quality is maintained at the expected technical standard, according to Arup’s Quality Management Systems.
• Communicate effectively with external stakeholders and effectively manage the time, quality and performance of small projects with minimal supervision
• Meeting deadlines, monitoring budgets and controlling expenditure to meet financial targets in your own area as well as prepare project reports for clients to summarize the key issues and strategically advising on the best outcome.

At Arup, you belong to an extraordinary collective – in which we encourage individuality to thrive. Our strength comes from how we respect, share and connect our diverse experiences, perspectives and ideas.

You will have the opportunity do socially useful work that has meaning – to Arup, to your career, to our members and to the clients and communities we serve.

Is this role right for you?

• Recognized relevant tertiary qualifications in Engineering, specializing in Fire Engineering or relevant area with minimum 3 years of experience.
• Recognized qualification for application of FSE registration is an advantage.
• Hands on experience in fire engineering in Singapore; working knowledge of computational fluid dynamics (CFD) smoke modelling and evacuation modelling.
• Be fully aware of all legislative requirements and other regulations governing Occupational Health and Safety.
• Attention to detail with problem-solving and analytical skills with the ability to stay informed about changing fire safety codes, standards and regulations.

What We Offer You

At Arup, we care about each member’s success, so we can grow together.

Guided by our values, we provide an attractive total reward package that recognises the contribution of each of our members to our shared success. As well as competitive, fair, and equitable pay, we offer a career in which all of our members can belong, grow and thrive – through benefits that support health and wellbeing, a wide range of learning opportunities and many possibilities to have an impact through the work they do.

We are owned in trust on behalf of our members, giving us the freedom, with personal responsibility, to set our own direction and choose work that aligns with our purpose and adds to Arup’s legacy. Our members collaborate on ambitious projects to deliver remarkable outcomes for our clients and communities. Profit Share is a key part of our reward, enabling eligible members to share in the results of our collective efforts.

Please see a list of Arup’s Singapore benefits below:

• Hybrid working policy & flexible working hours
• 13th month bonus
• Birthday leave
• Purchase Additional leave of up to 20 days (permanent employees)
• Paid parental leave for birth mothers 16 weeks & new parents (excluding birth mothers) 4 weeks
• Marriage leave (3 days)
• Examination leave (2 days)
• Family care leave
• Paid Annual subscription to relevant Professional association
• Reimbursement of Professional Engineers application and examination Fees
• International mobility opportunities
• QP allowance
• Site Allowance
• Work related travel insurance
• Dental expense cover
• Bike Loans of up to SGD2000

Different people, shared values

Arup is an equal opportunity employer that actively promotes and nurtures a diverse and inclusive workforce. We are an open environment that embraces diverse experiences, perspectives, and ideas – this drives our excellence.

Guided by our values and alignment with the UN Sustainable Development Goals, we create and contribute to equitable spaces and systems, while cultivating a sense of belonging for all. Arup provide an environment where you will make a positive difference. Discover more about life at Arup at www.arup.com/careers/your-life-at-arup.

We are committed to making our recruitment process and workplaces accessible to all candidates. Please let us know if you need any assistance or reasonable adjustments throughout your application or interview process, and/or to perform the essential functions of the role. We will do everything we can to support you.

Our Application Process

Please apply directly through our applicant tracking system. Shortlisted candidates will be contacted by Talent Acquisition to discuss next steps. Stay safe online – Arup will never ask for your bank details as part of our recruitment process.

Arup does not accept unsolicited resumes from recruiters or employment agencies.

Job Description:

• Design and configure CRM forms, views, dashboards, and workflows.
• Create solution designs to address client business, interface and performance requirements.
• Advise on complex MS Dynamics CRM business cases and propose comprehensive solutions that include MS CRM, third-party integrations, and customizations.
• Create functional requirements and designs for customizations.
• Create accurate estimates for implementation tasks.
• Provide MS Dynamics SME expertise to clients and mentor team members.
• Assist in data migration (data mapping) from external systems into MS CRM

Job Requirements:

• Bachelor's degree in Computer Science, Software Engineering, or a related discipline.
• 3-5 years of experience with Microsoft Dynamics 2016/365 CRM.
• Experience in customizations, JavaScript, C#, .NET, HTML, SQL Server, SSRS including plugins, scripting and form creation.
• Familiarity with the O365 platform, specifically its integration features with Dynamics CRM, including SharePoint and OneDrive/OneNote.
• Familiarity with Data Export Service and Azure SQL.
• Experience with SSIS or other ETL technologies.
• Experience with CRM API, REST/ODATA and SOAP endpoints would be advantageous.
• Strong written communication skills, especially for articulating technical specifications.

1. Pre-Construction Phase:Review project plans, specifications, and design documents.
   Assist in value engineering to optimize costs and improve project efficiency.
   Develop preliminary project schedules and budgets.
   Assist in selecting subcontractors and vendors.
   Obtain necessary permits and approvals.
2. Construction Phase:Oversee and coordinate all construction activities.
   Manage and coordinate subcontractors, suppliers, and vendors.
   Monitor project progress and ensure adherence to schedules and budgets.
   Implement and manage quality control and safety programs.
   Address and resolve any issues or conflicts that may arise on-site.
   Regularly communicate with the project owner or client to provide updates.
   Keep detailed records of project activities, changes, and any incidents.
   Conduct regular site meetings with stakeholders to review progress and address concerns.
   Ensure compliance with building codes, regulations, and permit requirements.
   Manage the procurement of materials, equipment, and services.
   Review and approve subcontractor invoices and change orders.
   Coordinate inspections and tests as required.
3. Post-Construction Phase:Conduct a final walkthrough and inspection of the completed project.
   Prepare and submit any necessary closeout documentation.
   Assist with the resolution of punch list items and ensure completion.
   Ensure that all required warranties, manuals, and as-built drawings are provided to the owner.
   Hand over the completed project to the owner or client.
4. Overall Responsibilities:Provide leadership and direction to the project team.
   Manage project risks and identify potential issues.
   Monitor and control project costs to ensure budget adherence.
   Facilitate effective communication among project stakeholders.
   Ensure that project goals for quality, safety, schedule, and budget are met.
   Maintain a safe and organized construction site.
5. Qualification: Minimum Mechanical / Electrial Engineering Qualification.

JOB SCOPE:

Design, develop and deliver working software applications to delight customers
Improve software quality using XP practices such as code review and unit testing
Adheres to the Software Craftsmanship Manifesto
Prepare architectural and other technical documents
Assist on: user stories elaboration, test automation and bug fixes, build and release automation

Requirements:
Solid experience in any of technologies: Java, NodeJS, Ruby on Rails, .Net , Agile, ReactJs
Experience with version control systems such as Git, Continuous Integration (Bamboo/TeamCity)
Experience developing in Mac/Linux environment
Experience working in agile teams – TDD, Pair programming, Scrum, XP
Familiar with both Windows and UNIX/Linux servers, Design Patterns, Unit Testing

EA License No: 96C4864

Reg. No.: R24121728

JOB SCOPE:

Design, develop and deliver working software applications to delight customers
Improve software quality using XP practices such as code review and unit testing
Adheres to the Software Craftsmanship Manifesto
Prepare architectural and other technical documents
Assist on: user stories elaboration, test automation and bug fixes, build and release automation

Requirements:
Solid experience in any of technologies: Java, NodeJS, Ruby on Rails, .Net , Agile, ReactJs
Experience with version control systems such as Git, Continuous Integration (Bamboo/TeamCity)
Experience developing in Mac/Linux environment
Experience working in agile teams – TDD, Pair programming, Scrum, XP
Familiar with both Windows and UNIX/Linux servers, Design Patterns, Unit Testing

EA License No: 96C4864

Reg. No.: R24121728

Geotechnical Engineer

Visit www.ourengineers.com

Undertake detailed design in Geotechnical field for different nature of projects
Develop design concepts and construction methodologies and provide leadership in sectional project execution
To liaise with Client, Client’s Consultants, Contractor, and Local Authorities to obtain design approval

Description:
Degree recognised by PE Board (Singapore).
3-5 years relevant experience in consulting firms (those above 5 years experience will be considered for Senior Engineer post)
Familiar with geotechnical design software such as Plaxis, RocScience, etc
Experience in design of deep excavations, foundations, ERSS, tunnelling, pipejacking, slope stabilisation, soil improvement, etc
Experience in civil, infrastructure, utilities, coastal and marine works

• Performs specific and moderate portions of a broader assignment of an experienced engineer.
• Gathers and correlates basic engineering data using established and well-defined procedures.
• Works on detailed or routine engineering assignments involving calculations and relatively simple tests.
• Proposes approach to solve new problems encountered using modifications of standard procedures or methods developed in previous assignements.
• Identifies discrepancies in results.
• Provides guidance to entry level engineers.
• Performs work in accordance with agreed upon budget and schedule with little supervision.
• Independently performs all the tasks necessary to complete primary design
• elements for engineering works. 
• Performance at this level requires developmental experience in a professional position.

Job Description:

• Involvement in Production testing scope.

• Operates and maintains simple test equipment appropriately to measure and perform RF PCBA & module tuning and testing

• Perform duties with minimal supervision

• Integrates continuous improvement concepts and techniques into work

• Performs other duties as assigned

• Set up and run HASS to qualify the modules under testing conditions.

• Conduct a Functional Acceptance Test to complete the module test process.

• Maintaining the operations of the ATE stations

• To generate test reports

• Integrates continuous improvement concepts and techniques into work

• Performs other duties as assigned

Job Requirement:

• Education background : ITE or Diploma in Electronics / Communication Engineering or related studies

• On the job training will be provided.

• Prior experience working in electronics (modules) production / manufacturing environment

• Competent handling of miniature with tweezers

• Ability to handle and solder components using a microscope

• Ability to produce consistent quality workmanship on repetitive manual processes

• Work Location: Ang Mo Kio

Knowledge, Skills, Competencies

• Able to understand mechanical and electrical wiring diagram with some basic understanding of cable termination.

• Experience with network design and networking exposure will be added advantage

• Good knowledge with Operating platform such as Microsoft Windows and Linux

• Proficiency in operating measuring equipment or software such as network analyser, serial protocol analyser and oscilloscope

Marine Service Engineer

Location at Tuas, Work on site (sea)

5 Work Days 8am-5pm / 8.30am-5.30pm / 9am-6pm

Basic Salary Open for Discussion + AWS(dec) + Variable Bonus (Jan) + Medical Benefits + Transport Allowances

Roles & Responsibilities

• Perform the repair, maintenance or overhaul of marine diesel engines 2 & 4 stroke under supervision of Engineer / Technicians.
• Comply with all the requirements to carry out the jobs in the shipyards or anchorages.
• Lifting and shifting heavy components of engine back to workshop for repair / recondition and vice-versa.
• Ensure prompt response and smooth communication with the customers
• Perform other tasks as may be assigned by the Operation Manager

Job Requirements:

• Must DEGREE in marine / mechanical / engineering qualification
• At least 3 years of related experience as Marine Service Engineer.
• Hands-on experiences in trouble-shooting, maintenance and repair is an added advantage
• Prefer someone with maintenance experience in marine engine makers like MAN and Wartsila
• Training period at office (Tuas), after training will work on vessel.
• Willing to work in shipyard / anchorage environment

Lee Wan Ling | Reg No: R23116154

THE SUPREME HR ADVISORY PTE LTD | EA No: 14C7279

Our client is a Singapore based Scientific and Medical devices provider with presence in Southeast Asia region. Due to their current expansion plan, they are looking for a Technical Service Engineer to join their Engineering Team, in hopes of developing the current high performing team. They are located in the South area – easily accessible.

Duties of Technical Service Engineer:

• Provide after-sales technical support for equipment installation and maintenance.
• Offer technical guidance and consultation to customers.
• Address and troubleshoot customer issues, ensuring timely solutions.
• Document service activities and prepare detailed reports.

Requirements:

• Minimum NiTEC in ELectrical or Mechanical Engineering
• 2 - 3 years experience in servicing Life Science Medical Devices
• Possess own transport

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R2199158
• EA Personnel Name: Soo Wei De

Our client is a Singapore based Scientific and Medical devices provider with presence in Southeast Asia region. Due to their current expansion plan, they are looking for a Technical Service Engineer to join their Engineering Team, in hopes of developing the current high performing team. They are located in the South area – easily accessible.

Duties of Technical Service Engineer:

• Provide after-sales technical support for equipment installation and maintenance.
• Offer technical guidance and consultation to customers.
• Address and troubleshoot customer issues, ensuring timely solutions.
• Document service activities and prepare detailed reports.

Requirements:

• Minimum NiTEC in ELectrical or Mechanical Engineering
• 2 - 3 years experience in servicing Medical Non-Imaging Devices

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R2199158
• EA Personnel Name: Soo Wei De

Our client is a Singapore based Scientific and Medical devices provider with presence in Southeast Asia region. Due to their current expansion plan, they are looking for a Technical Service Engineer to join their Engineering Team, in hopes of developing the current high performing team. They are located in the South area – easily accessible.

Duties of Technical Service Engineer:

• Provide after-sales technical support for equipment installation and maintenance.
• Offer technical guidance and consultation to customers.
• Address and troubleshoot customer issues, ensuring timely solutions.
• Document service activities and prepare detailed reports.

Requirements:

• Minimum NiTEC in ELectrical or Mechanical Engineering
• 2 - 3 years experience in servicing Animal Science Care Devices

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified

• Email Address: [email protected]
• EA License No: 19C9682
• EA Personnel No: R2199158
• EA Personnel Name: Soo Wei De

Marine Service Engineer

Office location : Boon Lay Way, Tradehub21
Working Location: On board ship

Working days: 5 days (Mon- Friday)

Working hours : 8am - 5pm

Salary : $2,000-$2,800 basic + OT + Allowances (Gross Salary $3,000 - $4,000)

Job Description

• Conduct periodic inspections, repair, service and maintenance of marine equipment to ensure reliable
  operation.
• Collaborate with clients and superintendents to deliver quality services efficiently.
• Generate reports and present findings to relevant personnel.
• Provide remote troubleshooting support through emails, ensuring customer issues are resolved promptly to maintain high satisfaction levels.
  

Requirements:

• Diploma in Engineering or equivalent (Electrical/Electronics/Mechanical/Mechatronics).