Responsibilities:

• Technical transfer product/project in assembly and testing, and from customers
• Provide technical support in manufacturing and testing in product build
• Provide technical support to QC in RMA issue
• Provide technical support to QA in Compliance, Regulatory, Customer & Audit

Requirements:

• Minimum Diploma in Electronics Engineering
• At least 2 years of relevant work experience in Electronics Manufacturing industry
• Technical competent to handle product/project manufacturing, transfers and troubleshooting
• Experience in product/project, PCBA manufacturing and testing
• Able to liaise with customer on technical matters
• Experience in manufacturing environment with ISO13485 & FDA preferred
• Good communication and problem-solving skill

Responsibilities:

• Provide tier-3 technical support for robotic systems, including hardware, software, and firmware components.
• Diagnose and resolve technical issues reported by customers, collaborating with the technical team to escalate and address complex problems.
• Document and report recurring issues to the Technical team to support continuous improvement and product development.
• Facilitate knowledge transfer sessions, training, and technical briefings to empower the Customer Success team in providing top-tier support to customers.
• Participate in testing and validation of new robotic systems and updates, providing critical feedback to ensure customer needs and experiences are addressed.
• Maintain detailed records of technical issues, resolutions, and feedback from customers and the Customer Success team.
• Develop and update technical documentation, user manuals, and support guides to assist the Customer Success team and customers in effectively utilizing robotic systems.

Requirements:

• Bachelor’s degree in Robotics, Electrical Engineering, Mechanical Engineering, Computer Science, or a related field.
• 2+ years of experience in technical support
• Excellent problem-solving skills with the ability to diagnose and resolve complex technical issues.
• Strong communication and interpersonal skills, with the ability to effectively bridge gaps between technical and non-technical teams.
• This position may require occasional travel to customer sites.
• Good English communication skills (verbal and written).

Job Description

• Understanding of Project Specifications, construction drawings and to ensure that all site activities comply with the regulations and client’s requirements
• Monitor site works to ensure the method statements and work procedure are strictly followed.
• Competent in carrying out supervision of structural works by identifying any non-conformity of contractor’s work site
• Ensure the Builder (incl. technical supervisors) executes the work in accordance to Consultant’s instructions
• Check drawings for discrepancies and highlight to Consultant, suggesting possible solutions to prevent delays
• Conduct quality inspections and quality control of materials used for the project
• To ensure proper documentation of site inspection records, safety records and approved /as-built drawings
• Maintaining and updating site records on progress of work, housekeeping and preparing reports
• Verify the contractors’ progress payment, claim in terms of work done and materials/equipment delivered and stored on site
• Witness all the inspection, testing and commissioning sessions performed by the contractors to ensure compliance with designs and specifications
• Report to project QP / Project Consultants Team on quality and progress
• Supervision of demolition of basement/foundation, ERSS construction and all other design works
• To manage & coordinate with the site supervisors (incl. RTO) with respect to C&S engineering works, architectural and M&E engineering works
• Possesses a complete understanding of local requirements, especially to comply with BCA's criteria for build-ability and safety assurance system
• To carry out regular site checks on Builder and ensure compliance on health and work safety in accordance with MOM
• To attend site, progress, variation and coordination meetings.
• Period: 36 months
• Start from: January 2025

Requirements:

• min. Degree in Civil / Structural Engineering or equivalent
• At least 8 years of relevant experience in supervision of commercial buildings
• Resident Engineer Certificate accredited by IES / ACES is a must, candidate without RE certificate need not apply
• Conversant in statutory code and requirements
• Good team player with strong interpersonal and communications skills essential

Please indicate project involved, expected salary and notice period required in CV.

We regret that only short-listed candidates will be notified.

For more posting, please refer to https://www.facebook.com/profile.php?id=61566487478500&mibextid=LQQJ4d

PROJECT ENGINEER (MARINE INDUSTRY)

Company background:

• One of Singapore’s established MNC company specializing within the Marine Industry providing integrated mooring and rigging services

Location: West (Clementi) - Company transportation provided from MRT

Working Hours: 5 Days Work Week, Mon to Fri (8.30am to 5.30pm)

Remuneration Package:

• Basic up to S$ 8500
• Variable Bonus

Job Responsibilities:

• Provide technical expertise to oversee the design, development and construction.
• Interface with system designer, vendors, fabricators including drawings reviews, sourcing equipment, cost control and monitoring, schedule monitoring and update.
• Oversee project implementation according to the requirements and objectives. This includes schedule monitoring, vendors sourcing and recommendation, purchase/ cost evaluation, resources allocation, attend to inquiries, clarifying technical details, supervising project execution, implementing corrective actions, conducting Factory Acceptance Tests, and finalizing as-built documentation.
• Diagnose and resolve malfunctions in deck machinery using technical manuals, hand tools, and power tools.
• Meticulously maintain records of all changes, maintenance, repairs, and inspections.
• Develop operating, maintenance and safety procedures for the system.

Requirements:

• At least a Diploma or Degree in Mechatronic or its equivalent discipline
• Preferably possess at least 5 years working experience within the Marine Industry or Shipyard Environment
• Good understanding of deck machinery such as winch, crane, lifting and handling equipment and the related IACS (particular ABS, DNV, BV) rules and regulations
• Added advantage with specific experience in WTW system (Offshore Passenger Transfer System)
• Strong understanding of mechanical principles, hydraulic and electrical system and P&ID with ability to perform trouble shooting
• Understanding of structural design is an added advantage
• Fluent in software skills (MS Office, MS Powerpoint, MS Project, Adobe and AUTOCAD)
• Ability to use Primavera scheduling software will be an added advantage
• Comfortable in travelling overseas to oversee projects

Please be notified that only shortlisted candidates will be notified.

Ian Fong | R22106545

Recruit Now Singapore Pte Ltd | EA No: 21C0845

technical understanding requirement .

a) understands the drawings and scope of works

b) understands the implications of different technicalchoice so as to meet the project objectives

c) involve in providing value engineering solutions basing on his knowledge .

d) to have knowledge in the preparationof engineering proect proposals and method statements .

e) carry out project objectives so align with company goals.

f) to co-ordinate program and monitor site work , materials , plant and equipment .

g) involving in client /consultant / sub-contractor meetings .

h) to carry out short term planning to meet site progress .

g) shop / as build drawing preparation .

h) Assists project manager in monthly progree report

Did you know KONE moves over one billion people every day. We employ over 60,000 driven professionals in over 60 countries worldwide joined together by a shared vision. As a global leader in the elevator and escalator industry, it is our mission to improve the flow of urban life.

What will you be doing?

Project Management Generic

Site supervision process:
• Accountable for the delivery of the installation project
• Accountable for Site Safety
• Responsible for securing efficient management of environmental aspects of the installation (waste handling, hazardous material, minization of travel)
• Accountable for the financial result of the project (cannot be responsible for costs associated with changes in factory prices or exchange rate variables)
• Participates to the sales/installation hand-over and validates the term of the order received from the customer together with the salesperson
• Prepares the overall installation program and resource planning
• Responsible for planning and organizing the delivery and storage of materials and tools to the site and placing the orders to subcontractors and Non KONE factory material suppliers
• Responsible for site preparations and follow-up of site readiness
• Accountable for use of correct KONE installation methods throughout the installation
• Ensures cost control as per action plans during budget, and pre-calculated CM2% towards achieving the R80 targets
• Responsible for administrative activities of the project including daily human resource management (absences, time sheet review/approvals) and reports project progress (schedule, installation hours, fitter time sheets, budget and risks) to his superiors
• Responsible for maintaining project documentation
• Updates information to company management systems (eg S-plan milestone updates)
• Collaborates with Accounts payable / Controlling to ensure site activities are planned and executed in accordance with contractual payment terms and actual payments received.
• Accountable for final testing of the equipment and handover to maintenance

Customer and Sub-contractor Relationship management:
• Accountable for customer satisfaction and quality of installation
• Accountable for Sub-contractor quality and Safety performance
• Single point of contact towards the customer during installation regarding site management, responsible for internal and external communication during the project
• Aims at achieving allocated sales targets and add-on sales and variations during installations
• Develops and maintains a cordial and professional relationship with the sub-contractors

At KONE, we are focused on creating an innovative and collaborative working culture where we value the contribution of each individual. Employee engagement is a key focus area for us and we encourage participation and the sharing of information and ideas. Sustainability is an integral part of our culture and the daily practice. We follow ethical business practices and we seek to develop a culture of working together where co-workers trust and respect each other and good performance is recognized. In being a great place to work, we are proud to offer a range of experiences and opportunities that will help you to achieve your career and personal goals and enable you to live a healthy and balanced life.

Read more on www.kone.com/careers

• Responsible for the effective implementation and successful completion of construction projects
• Produce the Project Execution Plan and responsible for the financial viability, on time delivery and customer control
• Liaise closely with subcontractors, architects, consultants and authorities
• Manage each phase of the project from design to completion and ensure efficient use of resources and enhance cost effectiveness
• Performing risk management
• Coordinates all site works including third party vendors, ensuring works meet specification and briefs
• Responsible for successful and quality project handover to the Client
• At least 10 years of working experience in Building & Construction in HDB (BTO) project
• Min Bachelor’s Degree in Civil Engineering

Job Scope

Job Duties

• Able to plan and make necessary arrangements for specific jobs given
• To conduct quality checks on work done by workers
• To oversee daily operations at site
• Ensuring that all workers comply with all safety measures required
• Liaise with main contractor and coordinator with regards to all matter pertaining to the project
• Responsible for the upkeep of documentation on project matters
• Submission of daily reports to coordinator and as built drawings upon completion

Job Requirements

• With at least 5 years of relevant site supervision experience especially with RC works, Dwall, canal and road diversions
• Possess required BCSS/Work at Height Assessor / Supervisor certifications
• Lifting Supervisor certificate an advantage
• Registered Earthwork Supervisor certificate an advantage
• Supervise Confined Space Work certificate an advantage
• Have initiative and responsible at work
• Conversant with key plans/technical drawings

• Responsible for the effective implementation and successful completion of construction projects
• Produce the Project Execution Plan and be responsible for the financial viability, on-time delivery and customer control
• Liaise closely with subcontractors, architects, consultants and authorities
• Manage each phase of the project from design to completion and ensure efficient use of resources and enhance cost-effectiveness
• Performing risk management
• Coordinates all site works including third party vendors, ensuring works meet specification and briefs
• Responsible for successful and quality project handover to the Client
• At least 10 years of working experience in Building & Construction

We are seeking a skilled Site Coordinator to oversee and drive projects from inception to completion. The ideal candidate will be responsible for planning, executing, and finalizing projects according to strict deadlines.

Key Responsibilities:

- Coordinate and monitor work progress at job sites to ensure adherence to project plans and timelines

- Assemble and lead project teams, assigning tasks and responsibilities.

- Monitor project progress, making adjustments as needed to stay on track.

- Identify and mitigate project risks.

- Ensure deliverables meet quality standards and budget constraints.

- Maintain comprehensive project documentation and conduct post-project evaluations.

Job Description:

• Be involved in project plan, Coordination operation
• Attend the project meeting if required
• Day-to-day site operation to ensure works are constructed as per project & safety requirement
• Supervise site works
• Liaise with clients on site works/project
• Other ad hoc duties as assigned
• Initiate and co-ordinate projects according to schedule.
• Assist engineering analysis and attend the site meeting.
• Any other duties as assigned by the project managers.

Job Scope:

• Collaborating with project managers to understand project requirements, specifications, and expectations
• Participating in project planning and scheduling activities
• Inspecting construction sites regularly to monitor progress and ensure compliance with design specifications
• Implementing and maintaining quality control procedures to ensure the project meets industry standards and regulations
• Conducting tests on construction materials to ensure they meet required standards
• Collaborating with architects, engineers, and other professionals to coordinate activities and resolve design issues
• Provide technical solutions to problems encountered during the construction process
• Efficiently managing resources, including labour, materials, and equipment
• Implementing and enforcing safety protocols to ensure a safe working environment
• Conducting regular safety inspections and addressing any issues promptly
• Maintaining accurate and up-to-date project documentation, including daily reports, progress reports, and as-built drawings
• Keeping records of materials used, labor hours, and equipment usage
• Identifying and resolving construction-related issues and challenges as they arise
• Providing regular updates to project stakeholders on progress, challenges, and milestones
• Undertake any other duties assigned by management from time to time

Job Requirement:

• Master’s degree in engineering or a related field
• At least having 2 years relevant experience in engineering or site engineering in construction industry
• Strong knowledge of construction methods, materials, and processes.
• Familiarity with relevant construction codes, regulations, and safety standards.
• Proficiency in using construction management software and tools.
• Excellent communication and interpersonal skills.
• Problem-solving skills to address unexpected challenges.
• Attention to detail and a commitment to quality.
• Able to multi-task and work under tight schedules
• Strong negotiation and problem-solving skills
• Able to face challenging tasks and meet high standards and deadlines
• Able to attend to emergency call due to project and works needs beyond office hours
• 6 working days

We are regret that only shortlisted candidates will be notified.

Requirements: Minimum 3 years experience in installation ACMV system and installation of ducting, fresh-air fan, exhaust fan, commercial Kitchen hood including control panel. Knowledge of electrical control circuit and should be very hard working

• Provide engineering support to various telecommunication equipment installations, testing, patching, and migration.
• Responsible for implementing Outside Plant Cable Networks, such as RF cable, structured cable, Fiber optic cable installation, and testing.
• Responsible for fixing and troubleshooting ADSL Modem, CISCO Routers, and wireless APsPerf
• Perform fault diagnosis, analysis & rectification of LAN, WAN, and Telephone issues
• Perform site acquisition, site survey, acceptance test plan(ATP), and network planning of new sites to roll out and reconfiguration of sites
• Provide engineering support activities either remotely, or on-site.
• Rotational 24x7 standby duties required

• Software Development, Implementation and Deployment in the area of industrial automation systems, with Human Machine Interface (HMI), including but not limited to the following sub-systems: Motion Control System, Vision System, Digital and Analog Input/output Control, Device control and Database.
• Work with customer and application team to configure, install and test new equipment.
• Provide software user training to customers
• Field service support, field deployment and on-site / remote debugging
• Overseas travel is required with short notice period.

Qualifications

• Candidate must possess at least Bachelor's Degree and/or equivalent, preferrably in Electrical / Computer Engineering and/or any other relevant course of study.
• Preferably with [1 - 3] Year(s) of working experience in Engineering in automation and/or any other related field/industry is required for this position.
• Fresh graduates with relevant knowledge in their course of study are welcome to apply.

Other Information

Skillset(s) Requirement:

• Required Knowledge: Sofware development
• Required Skill(s): C#, C++, VB.NET, WPF, Winform, MFC, MySQL Database
• Preferably Entry / Junior specialized in [Engineering] - [expertise, Electrical / Mechatronics / Computer Engineering] or equivalent.

Attributes:

• Can do attitude
• Adaptable to a fast-paced environment
• Able to work independently
• Good team player
• Highly logical

As an NPI Engineer, you will be responsible for overseeing the transition of new products from design to full-scale production. You will work closely with cross-functional teams, including Product Development, Manufacturing, Quality, and Supply Chain, to ensure the smooth introduction of new products while maintaining efficiency, quality, and cost-effectiveness. Your role will be instrumental in implementing new processes, optimizing manufacturing methods, and ensuring product manufacturability.

Key Responsibilities:

• Product Introduction & Process Development: Collaborate with the design and engineering teams to evaluate product designs for manufacturability, scalability, and cost efficiency.
• Cross-Functional Collaboration: Partner with Product Development, Quality Assurance, and Supply Chain to define project requirements and timelines, supporting a seamless transition to manufacturing.
• Production Line Setup: Develop and implement production line processes, workflows, and assembly instructions to achieve quality and production targets.
• Process Validation & Optimization: Conduct process validation tests, analyze data, and implement adjustments to optimize production yields and reduce waste.
• Supplier Management: Work with suppliers to ensure components and materials meet required specifications and quality standards.
• Continuous Improvement: Drive continuous improvement initiatives for production processes, focusing on quality, efficiency, and cost savings.
• Documentation: Develop and maintain technical documentation, including process flow diagrams, PFMEA, work instructions, and BOMs.
• Troubleshooting: Investigate and resolve production issues, providing timely solutions to minimize downtime and production delays.

Qualifications:

• Education: Bachelor’s degree in Mechanical Engineering, Industrial Engineering, or related field.
• Experience: 3+ years of experience in NPI, process engineering, or manufacturing engineering, ideally within precision engineering.
• Technical Skills: Strong understanding of production process development, validation, and troubleshooting. Experience with lean manufacturing principles and Six Sigma is a plus.
• Communication Skills: Ability to work cross-functionally and communicate complex technical information effectively.
• Analytical Skills: Proven ability to analyze data, identify trends, and make recommendations for process improvements.

Job description

• Design, develop, test, deploy, maintain and improve of software application

• Documentation of software design and description required in a software process life cycle

• Create and maintain documentation for software installations, changes and upgrades

• Involve in the setup and deployment of software for developmental, testing and operational use

• Manage individual project priorities, deadlines and deliverables

• Evaluate system architecture and make recommendations as required

• Perform peer-to-peer code reviews

Requirement

• Proficient in C, C#, NodeJS, Augular or ReactJS

• Familiar with working in Windows environment

• Good knowledge in Javascript / RESTful API / HTML5 / CSS3 / Typescript will be added advantage

• Good knowledge in SQL / NoSQL databases would be added advantage

• Good knowledge in Network Communication and configuration would be added advantage

• Team player with good interpersonal, written and verbal communication skills

Job Description:

• Perform electrical and mechanical assembly work for the semiconductor industry.
• Perform equipment assembly according to engineering drawings.
• Perform installation, repair, inspection, reassembly, refitting, and adjusting products as required.
• Coordinate M&E engineering work and work closely with other department staff to resolve site discrepancies and technical issues.
• Maintain work area clean, safe, and orderly.
• Perform repair pipe and plumbing if needed.
• Planning / Scheduling and coordination of M&E works.
• Oversee and ensure works are carried out by the approved drawings, materials, and method statements.
• Liaise with clients, consultants, relevant authorities, and sub-contractors on M&E issues.
• Update maintenance daily schedule.
• Any other duties as may be assigned.

Job Requirements:

• Minimum 3 years of relevant experience in the Construction industry.
• Diploma/ Degree in Mechanical & Electrical Engineering or related fields.
• Strong building and M&E knowledge with hands-on experiences.
• Positive attitude, willingness to learn, and good team player.
• Entry-level candidates are welcome to apply.

Others:

• Working hours: Monday to Friday - 8:30 am to 5:30 pm
• Saturday - 8:30 am to 12:00 pm
• Salary range: $2500 - $5000 (Price Negotiation)
  

Job requirement:

• Degree in Mechanical or Electrical Engineering.
• Must have at least 3 years of related experience.
• Proficient in Microsoft Office and AutoCAD.

Responsibilities:

• Responsible for all on-site technical and engineering matters.
• Determines project schedule by monitoring project progress, coordinating activities, resolving site problems.
• Prepares project status reports.
• Coordinates structural details and design features within the project.
• Flexible and able to work well in a fast-paced environment.
• Ensure works carried out meet Company's quality standard and contractual requirements.

Responsibilities:

• Architect and implement scalable control and navigation solutions for AMRs utilizing your expertise in ROS, C++, and Python. Your focus will be on robustness, efficiency, and adaptability in real-world environments.
• Evaluate and integrate third-party systems (HW/SW) to enhance KABAM robots' capabilities.
• Conduct rigorous field tests to validate the reliability and performance of navigation systems in diverse outdoor conditions. Leverage insights gained to iteratively improve and optimize navigation algorithms, incorporating SLAM, motion planning, and perception techniques.
• Maintain comprehensive documentation of design, development, and deployment processes. Foster a culture of knowledge sharing within the team by presenting insights and lessons learned in regular sessions.
• Provide expert support for remote robot deployments at customer sites worldwide. Your troubleshooting skills and hands-on assistance will ensure seamless integration and operation of our solutions.
• Stay abreast of the latest advancements in robotics technology. Engage in continuous R&D efforts to explore new methodologies and technologies that can elevate the capabilities and performance of our AMRs. Implement findings to enhance existing systems and processes, keeping KABAM at the forefront of technological innovation.

Requirements:

• Education – Bachelors or Masters in Computer Science/Electrical Engineering/Mechanical Engineering with a focus in robotics, mechatronics, or related fields
• Experience – Bachelors (with at least 3 years relevant experience) or Masters (with at least 1 years relevant work experience)
• Industry – Previous experience in a robotics company preferred
• Supervisory – Personnel management is nice to have. Project management/technical lead experience is preferred
• Language – English (required), Mandarin (desirable)
• Technology – C++/Python, Linux, git, ROS; SLAM, motion planning, or perception techniques
• Coordinating the Work and Activities of Others — Yes
• Guiding, Directing, and Motivating — Yes
• Making Decisions and Solving Problems — Yes

Responsibilities:

- Design and implement integration solutions for various physical security systems, including access control, video surveillance, intrusion detection, video analytics and alarm systems

- Ability to understand and address customer requirements and translate them into technical solutions

- Collaborate with product teams to address specific customer needs and feedback

- Design and propose security technology solutions tailored to different verticals

- Collaborate with cross-functional teams to gather requirements and define project scope

- Conduct site surveys and assessments to determine integration needs and best practices

- Conduct POC, demo, testing and setup of security system and video analytics

- Manage and execute projects with strong project management skills

- Develop documentation, including system specifications, integration plans, and user manuals

- Stay updated on industry trends, technologies, and best practices related to physical security

Requirements:

- Bachelor’s degree in Computer Science, Engineering, or a related subject

- Programming skills in Python, C++ and/or Javascript

- Fullstack experience is strongly preferred

- Strong understanding of networking, database management, and software integration

- Familiarity with industry standards and protocols (e.g., ONVIF, BACnet, etc.)

Nice to have:

- Professional experience working with VMS systems and integrating 3rd party solutions

- B2B (Business-to-Business) experience in physical security

- Technical security system certifications (I.e., Gallagher, Genetec, BICSI, Milestone) and/or related IT (i.e., CCNA) certifications preferred

- Possess market knowledge in physical security industry for verticals ie. transportation, commercial building, hospitality, etc.

Responsibilities:

• Develop and enhance robot software for the Smart+ RMF platform, our cloud based solution that enables remote intervention, robot management and teleoperation for any robot in the world.
• Write the code that enables Smart+ to handle new robots brought into the ecosystem.
• Integrate our robots with the world, by implementing new workflows and interactions with different systems.
• Collaborate with senior stakeholders to understand business requirements and translate them into technical specifications.
• Participate in daily standups, sprint review/planning, code reviews, and testing on physical robots as part of our agile development process.
• Produce clean, testable, and maintainable code while adhering to best practices.
• Support technical deployments both remotely and on-premise and address any issues that arise.
• Contribute to our open-source strategy, including the development of OpenRMF and ROS2.
• Support technical partnerships within our ecosystem network, including those in robotics, security, and facility management.
• Assist in defining product direction and participate in the overall architecture design and documentation for the Smart+ platform.

Requirements:

• Degree in Computer Science, Engineering, or a related field.
• 2+ years of relevant industrial experience (robotics, fleet management, system integration).
• 1+ years of professional experience with ROS, building production-level robotics systems.
• Strong proficiency in C++ and Python, with a solid background in ROS.
• Strong knowledge of networking protocols such as REST, MQTT, Zenoh, WebRTC, TCP/IP, UDP, and CAN.
• Excellent communication skills to effectively collaborate with both technical and non-technical stakeholders.

• Atleast complted Bechelor of Civl Engineer or equilant.
• Preparing site reports and completing other site documentation
• Conducting preliminary site inspections of potential construction sites to determine essential tasks
• Developing labor and material cost estimates for a project
• Advising construction team on operational enhancements to lower costs and enhance efficiency
• Ensuring the construction team follows health and safety standards
• Resolving technical difficulties that occur during a construction project
• Connecting and negotiating with clients, subcontractors and other professional staff

Key Accountabilities

• Provide Project Specific Engineering and Design support
• Develop new technical solutions, increase brand awareness in chosen market segments and expand our market share within the Applied Solution Industry
• In conjunction with the local regional offices, determine and execute the new technical engineering processes and systems to deliver the objectives agreed by the Solutions Hub and the country affiliates (PMI plan) and provide the framework and support to build solutions capabilities of all Stakeholders
• Support the implementation of process improvement and training plans to operate and grow the solutions capabilities of our solutions businesses across all our regions
• Support, coach and lead through change by way of new ways of working, tools, responsibilities and expectation mapping and measurement.
• Work closely with key engineers to ensure delivery in all key process and training activities.
• Lead by example – always behave by way of values.
• Provide a high level of engagement through regular meetings and face to face contact.
• Communicate and maintain trusted relationships with stakeholders, employees, business partners, customers and authorities
• Analyse problematic situations and occurrences and provide solutions to ensure resolution and recovery
• Ensure Daikin policies and legal guidelines are communicated all the way from the top down in the company and that they are always followed.
• Other duties as required.

Technical Competencies

• Knowledge of Schneider Electric, Niagara Framework and other Platforms, Building Automation & Analytics Technologies.
• Proficiency in creating and editing Mechanical and Electrical drawings using AutoCAD and VISIO.
• Programming for Electronic DDC control systems / PLC Systems using Functional Block Diagrams.
• Knowledge of instrumentation sensors and field communication protocols, e.g Modbus, BACnet etc.
• Ability to understand and modify electrical diagrams and drawings.
• TCP/IP Networking and protocols

Requirements

• Automation Industry Experience (Tridium Niagara or Schneider Electric Preferred)
• Degree qualified (Engineering or related discipline) preferred
• 5+ years working in successful solutions focused teams
• Proven Impact on technical solution support
• Exemplary communication and negotiation skills
• Exemplary presentation skills
• Exemplary Office Suite skills, Excel, Word, PowerPoint, Teams, BI

• Reports to APM
• To assist in site supervision structural and architectural works
• Coordinate with consultant RTO / RE.
• Coordinating for the project planning, documentation and execution of works on site
• Coordination, supervision & monitoring the progress of the project works on site, manpower mobilization, materials planning & ordering
• Coordinate with the contractor, suppliers on all project implementation issues and attend site meetings when required
• Coordinate for all submissions
• Produce weekly site progress reports
• Attend subcon meetings, conduct site inspection on work progress to ensure quality control in accordance to meet authority requirements
• At least 3 years of working experience in Building & Construction in HDB (BTO) project
• Building and Architectural experiences
• Conquas Knowledge
• Good organizational and planning skills
• Effective communication and coordination skills and team work
• Able to work independently and in a team
• Independent with good communication skill