The Site Engineer (Building) is responsible for assisting on the progress of site works and manpower related aspects of the project.

The responsibilities of this position are, and not limited to, as follows:

• Monitor and supervise Engineers / foremen, ensure compliance to the quality procedures & standard of workmanship. Checking on quality and quantity of work by subcontractors.
• Preparation of detailed program for the site team to follow accordingly & completed in time.
• Resolve drawing discrepancies & technical difficulties with Technical team.
• Coordinates between sub-contractors/vendors/internal departments and monitor site manpower / material / equipment demands to meet schedules.
• Liaise with the Consultants on the submission related to structural works and Technical Department.
• Plan all works on site, including program schedules and construction methods, forecast equipment, material and manpower requirement, and control usage and wastages of all.
• Adherence to safety practices in the work place.
• Any other duties that may be assigned to you from time to time as your superior / management deem fit.

Qualifications and Education Requirements

• Education: Degree in Civil Engineering
• Experience: Prior 3 years experience in building projects

Job Responsibilities

· Technical Support:Provide on-site technical support to customers, including troubleshooting, diagnostics, and repairs of hardware and software issues.

· Installation and Configuration: Install, configure, and test new hardware and software systems according to customer requirements.

· System Maintenance:Perform regular maintenance and updates on customer systems to ensure optimal performance and reliability.

· Customer Training:Train customers on how to use and maintain their systems effectively, including providing documentation and hands-on guidance.

· Issue Resolution:Respond promptly to customer inquiries and resolve issues in a timely manner, ensuring customer satisfaction.

· Documentation:Maintain accurate records of all work performed, including issue logs, service reports, and customer communications.

· Collaboration:Work closely with internal teams, including sales, support, and engineering, to ensure customer needs are met and to escalate issues as necessary.

Requirements:

Degree/Diploma in Computer or Electrical or Electronic Engineering or equivalent
Knowledge of programming in C,C++ are added advantages
Knowledge of embedded electronics fundamentals
Have knowledge of LoRaWAN and related IoT products are added advantages.
Have passion for exploratory testing and test automation are added advantages.
Able to work independently within tight schedule with positive disposition.
Excellent knowledge on Microsoft Office (Words, Excel & Powerpoint)
Fluent of English and Chinese in both speaking and writing

Job Description & Requirements

Get to know our Team:

We are living in dynamic times. Technology is reshaping how we live, and we want to use it to redefine how financial services are offered. Grab is the leading technology company in Southeast Asia offering everyday services to the masses. Singtel is Asia’s leading communications group connecting millions of consumers and enterprises to essential digital services. This is why we are coming together to unlock big dreams, and financial inclusion for people in our region is just one of them. We want to build a digital bank with the right foundation - using data, technology and trust to solve problems and serve customers. Join us if you have what it takes to help build this new Digibank with us.

Get to know the Role:

At Digibank we treat Infrastructure and operations as Software Engineering problems. Our mission is to build and progress software platforms which enables provisioning and managing of all Digibank services in safe, reliable and scalable ways. We consistently challenge the status quo, use new technologies to build platforms and tooling for engineering teams.

In this role you will make significant decisions with a huge impact on building modern banking technology. You would be part of a team, responsible for designing & architecting new solutions, finding creative ways to optimise existing solutions which will improve agility for managing hundreds of microservices infrastructure in a stable & reliable way.

If you are

• A strong believer of automating DevOps & SRE aspects like infrastructure provisioning, deployment, observability, incident lifecycle, uptime SLA etc.
• Bold to challenge, open to get challenged, curious to learn & grow

This is the right place for you!

The day-to-day activities:

• Working with Kubernetes clusters hosted in AWS
• Ability to apply DevOps practices alongside modern data technologies such as Airflow, Snowflake, Presto and DBT
• Using InfrastructureAsCode tooling like Terraform, Ansible to manage AWS & Kubernetes resources
• Engage with the data-engineering and data-science teams to help build infrastructure and develop software for reliability and scale.
• Troubleshoot priority incidents, facilitate blameless post-mortems and ensure permanent closure of incidents
• Perform analytics on previous incidents and usage patterns to better predict issues and take proactive actions
• Build and drive adoption for greater self-healing and resiliency patterns
• Design automated software and product upgrades, change management, and release management solutions
• Design, code, test and deliver software to automate manual operational work. Own your tools and services end to end.
• Be part of on-call rotation for the team’s tooling and 24x7 support coverage as needed
• Succeed, fail, and learn together with other talented people. We believe in an environment that provides an opportunity for growth and see education as an outcome of failure that gets us closer to the next breakthrough

The must haves:

• Bachelor's degree in information systems, information technology, computer science, or similar.
• 4-10+ years professional experience in a software management position.
• Experience with dockers / containers / k8s.
• Have experience working with Datalake architecture.
• Experience with configuration management tools, Ansible is preferred
• Direct production operations experience in a cloud environment.
• Experience contributing to technology and product strategy.
• Experience leading capability building initiatives across diverse areas such as infrastructure and operations automation, software quality, delivery automation and other core engineering.
• Demonstrated experience of driving operational efficiency and transparency of a growing engineering organization.

Job Description & Requirements

Get to know the Role:

• As a Site Reliability Engineer (SRE) you will help build a meaningful engineering discipline, combining software and systems to develop creative engineering solutions to operations problems.
• Much of our support and software development focuses on optimizing existing systems, building infrastructure and reducing work through automation.
• You’ll join a team of curious problem solvers with a diverse set of perspectives who are thinking big and taking risks.
• As an SRE you’ll be focused on running better production applications and systems.
• SRE is a key contributor to core infrastructure and functional development teams throughout the life cycle to help support software for reliability and scale.
• Key areas of focus include automation, application/platform uptime and quality, packaging/distribution techniques, platform design “operability”, analytics, deployment, adoption, and tool development, among others.
• The position will wear many hats from owning day to day health and performance, to identifying incidents/developing remediation plans, to working with open source software and experienced packaging techniques, to working with development teams and contributing to the strategic roadmap and execution.
• Candidates from a variety of software, platform, or automation engineering backgrounds will be considered for this position.

The day-to-day activities:

• Design, code, test and deliver software to automate manual operational work
• Troubleshoot priority incidents, facilitate blameless post-mortems and ensure permanent closure of incidents
• Engage with development team throughout the life cycle to help develop software for reliability and scale, ensuring minimal refactoring or changes
• Perform analytics on previous incidents and usage patterns to better predict issues and take proactive actions
• Perform the L1/L2/L3 support activities for the Production Support project with analysis and design work, including impact of requirements across all system components
• Build and drive adoption for greater self-healing and resiliency patterns
• Design automated software and product upgrades, change management, and release management solutions
• Participate in the 24x7 support coverage as needed

The must haves:

• Bachelor's degree in information systems, information technology, computer science, or similar.
• 1-3+ years professional experience in a software management position.
• Experience with dockers / containers / k8s.
• Direct production operations experience in a cloud environment.
• Experience contributing to technology and product strategy.
• Experience leading capability building initiatives across diverse areas such as infrastructure and operations automation, software quality, delivery automation and other core engineering.
• Demonstrated experience of driving operational efficiency and transparency of a growing engineering organization.

Job Description & Requirements:

• Review of Civil & Structural working drawings and shop drawings in connection with SEM and steel structure shop drawings during pre-construction phase to prepare construction methods, identifying risks to promote strategies and alternative methodologies to mitigate.
• Organizing regular meetings with the sub-contractor's technical teams to resolve technical problems in pre-construction and construction phase.
• Working closely with Design team and LTA/QPS (client) to resolve execution issues with appropriate functional proposals with an aid of presentation or sketches.
• Preparing method statement for construction working including RA and SWP.
• Prepare of RFI for site inspection for construction, MPI test, welding works and post concrete works and also involving in site inspection with QP.
• Reviewing of rebar BBS prepared by sub-con in compliance with standards and shop drawings roof slabs, steel structures and corbel details for precast installation.
• Site Supervision of construction of structures such as pile cap, undergrounds tanks, base slab, column (~12m high) including corbel, RC beams, Capping beam, RC and PC beam connections, ramps, steel and RC struts, hanging sumps and staircases.
• Reviewing and site supervision of surface water drain and waterproofing shop drawings and site work.
• Assisting construction manager for planning and preparing daily progress reports
• Tracking and optimizing manpower for each works
• Preparation of conceptual drawings for steel decking or other temporary structures required on site and reviewing shop drawing submitted by sub-con and supervising site installation.
• Reviewing concept drawings and supervising installation of bracing connections between permanent plunge-in-columns for top down column construction.
• Reviewing sub-con's shop drawing for steel strut and supervision of installation work.

Job Purpose

The WREF & EHS, Site Lead is responsible for the management and delivery of workplace, infrastructure and services at the commercial sites encompassing Singapore, Malaysia, Indonesia and Vietnam, and ensuring that these supports and facilitate all business operations. The role provides senior leadership and direction to their organisation (contract partners), delivering a coherent, joined up approach to employee experience and aligning to their customers business strategy.

The Site Lead will serve as the primary liaison with the businesses at the site level, or stakeholders. The infrastructure and services at the site level are provided by contract partners, and as such, the Site Lead will ensure effective local governance of contracted relationships.

This role will be charged with developing the business plan for the site portfolio, on-boarding new sites and delivering the WREF aspirations within the region in partnership with the COEs. The incumbent will be instrumental in standardizing WREF services and driving performance across the sites within each region.

The role takes accountability for their markets of operation performance by leading One WREF team and ensuring cost, quality and compliance metrics are achieved. The role will also support the APAC real-estate and Projects team with delivery of strategy.

EHS

• Establish and implement commercial EHS management system at the site location(s) to ensure compliance with local EHS legislation and GSK global EHS standards.
• Facilitate regular commercial EHS council meeting joint by all relevant functions to discuss EHS concerned areas, to prioritize actions; to ensure appropriate resources and plans are in place.
• Work closely with compliance officers to ensure commercial EHS risk has been identified and mitigated properly.

Key Responsibilities

WREF

• To be responsible for the designated service delivery and its ongoing development across the relevant site or region.
• To establish and develop key relationships with senior GSK management and the service providers to enable to successful delivery of cost savings and service level agreements at the site or regional level.
• To be responsible for the local contract governance and delivery to ensure value and efficiencies at the site or regional level
• · Identify and/or support the successful delivery of all capital/ revenue projects across the region or site including infrastructure, business driven, or workplace initiatives by means of third party resources.
• Ensure uninterrupted delivery of all facility operations to the business through internal and contract resources.
• Act as key GSK contact with external community, government, or other agencies at a regional, site or local level.
• Act a mediator and decision maker in the resolution of disputes associated with delivery of services at the regional and site level
• Identify opportunities for improved service site level delivery from providers through innovation, technology, and processes.
• Chair, co-chair, or otherwise lead a site level operations team including key stakeholders, business partners, and contract partners.
• To provide guidance, drive, support, and goals for the designated service category teams accountable for delivering services to the local or regional sites.
• Tracking and monitoring performance metrics and indicators for the site or region
• To report performance and required executive level decisions or interventions to ensure compliance with the contract terms
• Maintains ethics and compliance values even when potential risk exists

EHS

• Setting EHS objectives to align with regulatory GSK global EHS requirement and facilitate EHS council to accomplish commercial EHS objectives.
• Lead EHS risk assessment and work with business partners to mitigation EHS risks.
• Establish, review and update commercial EHS policies and procedures at the site(s)
• Establish employee health programs to promote healthy work environment and mental wellbeing.
• Facilitate key commercial EHS programs implementation, such as life safety, office safety, health and wellbeing.
• Develop EHS training programs for the commercial business and deliver EHS induction training for new employee induction program.
• Be responsible to coordinate regular EHS inspection and audit program within commercial offices including sales office(s)
• Facilitate EHS incidents investigation and responsible for EHS incident reporting to local authority and global EHS reporting system.
• Liaison with GSK global and regional EHS network to learn and benchmark best EHS practice.

Security

• Follow Security policy, procedures and ensure an environment to protect people, assets and information.
• Coordinating security issues and investigations at site.
• Conducting risk assessment and security reviews
• Crisis Management coordination / BCP – Security and Admin

Skills, Knowledge, and Experience

• Bachelor’s degree in Business Administration, Engineering or Architecture
• Minimum 8 years of experience in both Workplace Real Estate & Facilities (WREF) and Environmental Health & Safety (EHS) in pharmaceutical industry
• Working experience in APAC countries including Singapore, Malaysia, Indonesia, and Vietnam
• Strong influence and communication skills at all levels within the market
• Experiences in office administration, or HR management
• Excellent English skill - oral and written.
• Excellent interpersonal, communication skills, with customer service orientation
• Good computer skills and relevant software applications

Job Description & Requirements:

• Review of civil & Structural working drawings and shop drawings in connection with SEM and steel structure shop drawings during pre-construction phase to prepare construction methods, identifying risks to promote strategies and alternative methodologies to mitigate.
• Organizing regular meetings with the sub-contractor's technical teams to resolve technical problems in pre-construction and construction phase.
• Working closely with Design team and LTA/QPS (client) to resolve execution issues with appropriate functional proposals with an aid of presentation or sketches.
• Preparing method statement for construction working including RA and SWP.
• Prepare of RFI for site inspection for construction, MPI test, welding works and post concrete works and also involving in site inspection with QP.
• Reviewing of rebar BBS prepared by sub-con in compliance with standards and shop drawings roof slabs, steel structures and corbel details for precast installation.
• Site Supervision of construction of structures such as pile cap, undergrounds tanks, base slab, column (~12m high) including corbel, RC beams, Capping beam, RC and PC beam connections, ramps, steel and RC struts, hanging sumps and staircases.
• Reviewing and site supervision of surface water drain and waterproofing shop drawings and site work.
• Assisting construction manager for plannning and preparing daily progress reports
• Tracking and optimizing manpower for each works
• Preparation of conceptual drawings for steel decking or other temporary structures required on site and reviewing shop drawing submitted by sub-con and supervising site installation.
• Reviewing concept drawings and supervising installation of bracing connections between permanent plunge-in-columns for top down column construction.
• Reviewing sub-con's shop drawing for steel strut and supervision of installation work.

We are seeking a motivated Site Reliability Engineer (SRE) to join our team. The ideal candidate will ensure the reliability, performance, and scalability of CIX’s technology stack while supporting critical infrastructure needs globally. With a diverse client base across multiple jurisdictions, you are also required to cover London business hours to ensure smooth operations and effective collaboration. This is a hands-on, dynamic role where you’ll collaborate with multiple departments, providing insights and improvements that align with our global growth strategy.

Responsibilities

• Manage scalable and resilient infrastructure using cloud solutions
• Implement and maintain monitoring solutions to track system health and performance across application and data systems.
• Respond to alerts and incidents, troubleshooting issues as they arise to minimize downtime and ensure high availability.
• Conduct post-incident reviews (PIRs) to analyze failures and improve systems and processes, optimizing resource utilization to ensure cost-effectiveness while maintaining performance and reliability.
• Implement CI/CD pipelines for deployment processes to automate and enhance deployment processes.
• Monitor system capacity and usage trends to anticipate future needs, working with the team to identify and resolve performance bottlenecks and ensure timely scaling of resources.
• Set up monitoring and alerting systems to proactively catch issues before they impact users and maintain optimal system performance.
• Manage software deployments, patches, and upgrades for supported applications, ensuring minimal disruption.
• Collaborate with development teams to reproduce issues, gather requirements, and test solutions
• Document processes, create user guides, and deliver training to internal stakeholders.
• Proactively review and improve processes, tools, and practices to identify opportunities for enhancement.
• Stay updated with industry trends, new technologies, and best practices relevant to SRE and fintech.

Requirements

• A minimum of 5 years of hands-on experience in site reliability engineering, infrastructure management, or DevOps.
• Experience with Docker and Kubernetes for container orchestration and management and troubleshooting.
• Experience with at least one major cloud provider, such as AWS, Google Cloud, or Azure (preferable), with a focus on deploying and managing infrastructure.
• Solid understanding of networking principles, including DNS, TCP/IP, VPNs, and load balancing.
• Familiarity with CI/CD pipelines (preferably ArgoCD, Helm Charts, or similar DevOps tools) for automation of deployment and infrastructure processes.
• Strong background in Linux environments, including bash scripting for automation and troubleshooting.
• Experience with monitoring tools for altering and dashboards.
• Experience with Terraform for managing infrastructure as code is preferred.
• Azure Administrator Certification (or equivalent) and Certified Kubernetes Administrator (CKA) certification preferred.
• Strong willingness to continuously learn and adopt new tools, frameworks, and technologies as required by the job.
• A strong team player, with excellent communication skills, who strives for excellence and continuous improvement.

CIX is an equal opportunity employer committed to diversity and inclusion.

*We seek your understanding that only shortlisted candidates will be contacted.

(a) Responsibilities:

The candidate is responsible for the end-to-end testing activities of an integrated e-payment system. The primary responsibilities would include carrying out the activities in the testing lifecycle including the test

planning, and analyzing business and system requirements.

The candidate will also be responsible for:

• Preparing the test environment, designing, and developing the test cases.

• Preparing the test environment, and executing the test procedures.

• Automating the test solution based on the system design using scripting or programming languages as well as performance tuning.

• Create traceability to requirements, analyze gaps and address them.

• Logging and tracking defects to closure

• Conducting test reviews with internal and external stakeholders.

• Perform root cause analysis for production and user acceptance defects, and address test gaps to ensure test efficiency.

• Develop design documents and user manuals that would effectively describe and provide clear instructions on the test automation solution to the end users including testers and stakeholders.

(b) Qualifications & Requirements:

• Tertiary qualification in Information Technology or Engineering

• At least 3 years’ relevant experience in executing testing and

developing test automation solutions involving devices (UI-based

or embedded) and/or back-office systems with familiarity on the full

system development lifecycle from requirement, development, to

testing and deployment;

• Good written and verbal communication skills;

• Able to work well both independently as well as in a team;

• Certification in software testing preferred;

• Experience in micropayments Fare Collection systems using Smart Cards and in diverse test execution phases (System Integration Testing, User Acceptance Testing, Performance testing) would be an advantage;

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a MECHANICAL ENGINEER/ SENIOR ENGINEER to be part of our FACILITIES DEPARTMENT diverse team of talent. You will be responsible for HVAC systems, Clean Room, Building services and maintenance.

What you will be working on:

• To provide facilities support pertaining to Clean Room, Chillers and HVAC systems, Environmental Protection Systems, Process Utilities Supply Systems, Building Services and Maintenance, and other miscellaneous mechanical and facilities systems to wafer fabrication so as to ensure continuous supply of utilities and related facilities at the required performance level or specifications
• Formulate, implement, review and improve preventive and predictive maintenance programs for systems in charge so as to ensure that the systems function as intended at all times
• Carry out repair and troubleshooting of systems in order to restore systems to their operating conditions in the shortest possible time. Carry out root cause analysis and implement action plans to prevent recurrence
• Able to formulate effective reporting and tracking systems for monitoring of system performance and capacity usage. Recommend and implement improvement/enhancement projects where appropriate.
• Formulate, implement, review and improve operating procedures so as to ensure optimum operation of systems
• Monitor and review utility consumptions and work with users to implement projects to reduce the consumption where possible
• Knowledge of all relevant standards, legislations, codes of practice etc and ensure their compliance
• Provide guidance and training on the systems in charge to fellow colleagues so as ensure adequate working knowledge and system backup
• Ensure plant histories, drawings, data and other appropriate documentations are being generated and properly filed for future reference and review.
• Evaluate and recommend appropriate spares, consumables and other resources necessary for the day-to-day operation of the systems.
• Conduct project supervisions.

More About You:

• Master / Degree in Science, Mechanical Engineering, Building or equivalent. Preferred candidate with SCEM certification.
• 5 years of relevant working experience in semiconductor, pharmaceutical or petrochemical industry. Hands-on experience in day to day operation and maintenance essential.
• Experienced in managing cleanroom (Class 100 environment) systems
• Person shall act as SME for ACMV system. Person must have sound knowledge of operation and maintenance of Clean room areas and ACMV system
• Provide building services and maintenance, including building facilities repair and upgrading, housekeeping, landscaping and pest control.
• Knowledge of maintenance principles and good engineering practices.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a Senior Engineer/Engineer to be part of our Product Engineering diverse team of talent. You will be responsible for yield, quality and reliability issues of devices.

What you will be working on:

• Resolve yield, quality and reliability issues in the qualification of new devices
• Perform pre-tapeout risk assessment and communication with Business line/ Fab on the necessary actions to eliminate/ minimize risk
• Conduct product yield analysis to identify root causes of wafer sort and final test failures
• Work with Customers and Account Managers to maximize die output
• Establish product low yield criteria and dispositioning
• Provide product engineering support to failure analysis lab for electrical fault isolation
• Provide product engineering support to reliability lab to understand and resolve reliability failures
• Compliance to safety, discipline and housekeeping rules
• Support cost reduction through yield improvement and resolving excursion
• Participate in continuous yield and productivity improvement projects

More About You:

• Bachelor's Degree in Engineering (Electrical/Electronic) or equivalent
• 2 years of relevant product engineering experiences in front-end wafer fab environment or
• In depth knowledge of semiconductor device physics, electrical & electronics engineering fundamentals & wafer fabrication processes
• Strong analytical and problem solving skills
• Good communication and interpersonal skills

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a Engineer/ Senior Engineer to be part of our Photo Process department diverse team of talent. You will be responsible to sustain and improve all metrology tools and recipe indices to meet operations goals

What you will be working on:

• Optimize process capability to meet operation needs
• Perform Shift duties to support production
• Implement projects to upkeep process capabilities and reliabilities
• Troubleshoot process issues, establish Best known methods for future reference.
• Monitor and control process performance indices such as Cpk
• Work as a team with both equipment and manufacturing Engineers to meet module objectives
• Start-up new equipment processes which involves process characterization and development
• Establish and maintain a good audit system for both internal and QA audit on process documentation.
• Troubleshoot out-of-control situations and decide on the lot disposition in an out-of-spec situation.

More About You:

• Bachelor Degree in Engineering, Science or equivalent
• 1-3 years experience in semiconductor manufacturing environment. Fresh graduates with keen interest to develop a career in semiconductor manufacturing environment are welcome to apply.
• Basic engineering knowledge, which may include semiconductor devices theory, electronics, digital principle and wafer fabrication processes.
• Good communication and presentation skills
• Proficient in Microsoft business applications
• Good problem solving skills
• Posses logical thinking skills
• Team Player
• Strong sense of responsibility
• Positive learning attitude
• Able to take pressure under time-constrained situations
• Detail-oriented

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

The candidate need to work in construction site and need to have construction site work experience. candidate must work shift work and long hours till complete the concrete work task. co -ordination with clients and supervisor and company executives. need to know how to estimate quantity for the concrete volume and steel and form work materials requirements.

About Us

Vivo Surgical is a patient-focused, clinician-driven medical device developer and manufacturer. Headquartered in Singapore with offices in China and Thailand, we are pioneering a novel endoscopic surgical robot for complex endoluminal surgeries. ISO 13485 certified with international accreditations awarded such as the US FDA and European CE mark, our devices target the medical needs of the world through innovative applications of science & technology. These encompass such fields as in vivo surgical LED lighting, portable endoscopy and endoscopic robots, which are strategically co-developed with world-class healthcare institutions and KOL collaborators. Join us as we build towards our vision of being Asia Pacific’s leading medical device developer and manufacturer.

About The Role

We value the importance of having a robust engineering team that would serve as a key pillar for sustained commercial success. To that end, we are looking for an Electrical Engineer to join us on this journey. In this role, you will be part of our fast-growing team and will take ownership of your role from the get-go. You will be working on the electrical interfaces of our robot from the design and development phase all the way to manufacturing. You will be developing these solutions alongside our clinical KOLs to produce and test the parts and subsystems that will eventually be integrated into the robotic system. Throughout the process, you will also be involved in the verification and validation testing phase such as producing testers, generating test protocols and reports. Your role will require you to work in close tandem with our external partners and suppliers.

Your responsibilities shall include the following:

• Involved in the establishment of the robotic system’s design requirements according to users’ needs.
• Design and develop hardware system architecture and electrical systems based on set requirements.
• Generate schematics and electrical diagrams following respective standards and best practices.
• Source, evaluate and troubleshoot components, PCBAs, wire harnesses and subsystems.
• Assist in developing test protocols and reports to verify various subsystems and the main system.
• Involved in developing testers and test tools for verification tests.
• Support the team with electrical safety and EMC testing.
• Take part in the design control and risk management documentation generation tasks.
• Work with the team to optimize the system’s cost, manufacturability, quality, and reliability.
• Contribute and watch your ideas materialize into the fast-paced iterations of our system to constantly strive to meet the end users’ needs.

Your Qualifications & Experience

• Minimum Bachelor’s degree in Electrical Engineering, or related.
• At least 3 years’ experience in Electrical, Embedded Systems, Robotic Engineering, or related fields.
• Skilled in PCB design software such as Altium Designer or other similar tools.
• Experience in circuit design with ARM MCUs is essential.
• Hands-on experience with embedded communication protocols such as UART, I2C, SPI, CAN, TCP.
• Knowledge of embedded platforms such as MCUs (STM32), DSP, FPGA will be advantageous.
• Adept at utilizing equipment such as multimeters, oscilloscopes and spectrum analyzers.
• Hands-on experience with soldering equipment and crimpers preferred.
• Knowledge of C/C++ and Linux will be an advantage.
• Understanding of standards such as IEC 60601-1, 60601-1-2 and 62304 will be a plus.
• Strong analytical, troubleshooting, problem-solving, and communication skills.
• Ready to embrace a positive and collaborative mindset to thrive in the dynamic start up environment.

Contact

Please send your CV and cover letter to: [email protected]. We look forward to receiving your application.

You will be a key member of the R&D Digital Translation team established under the Singapore Maritime Institute. The R&D Digital Translation team develops and operates digital and cyber products and translates R&D projects to real world implementations for the maritime industry.

You will collaborate with various project managers, solutions architect and infra engineers to deliver leading-edge digital solutions and services to meet the business requirements of the maritime community. You are pro-active, self-motivated and resourceful team member with good technical or digital knowledge and possess strong influencing and people handling skills. You are constantly looking at new ways to apply digital technologies to meet business needs and can handle multiple projects concurrently.

Key Responsibilities

1. Design, build and maintain the software development pipeline automation with related toolsets to enable CI/CD

2. Design and implement the infrastructure and operating environment for container-based microservices that will meet the agreed high availability, performance and security requirements

3. Utilise native cloud tools to monitor the health and performance of the production and UAT environments, and automate the alerts as part of the incident reporting framework

4. Work closely with development teams and other internal teams to ensure that solutions are designed in accordance to requirements to facilitate scale/performance, security and operability

5. Work closely with on-site Tenant Facility Management (TFM) team to supervise day-to-day cloud operations which include activities such as regular patching and system configuration

6. Support and ensure that the software releases are aligned with MPA's internal software release and deployment process

7. Facilitate and support troubleshooting or root cause analysis of platform issues or incidents

8. Proactively monitor and identify opportunities for automation, process improvement and architecture simplification

9. Participate in project planning and management activities

10. Research and develop prototype using relevant technologies and trends for continuous improvement of the platform

Requirements

1. Background in IT/Computer Science/Computer Engineering or relevant discipline

2. At least 2 to 3 years of working experience in DevOps automation, containerisation and orchestration

3. Strong knowledge and experience in Microsoft Azure and/or Amazon Web Services and related cloud services (e.g. Azure DevOps, hands-on experience using Azure Administrative portal). Certification(s) in Microsoft Azure (e.g. MCSE: Cloud Platform and Infrastructure or equivalent) and Amazon Web Services will be an advantage.

4. Strong knowledge and experience in software development automation tools

5. Strong scripting skills (e.g. powershell, cli, python)

6. Strong understanding and experience in virtualisation and networking in a container environment such as Kubernetes, Docker

7. Strong understanding of cloud computing/container deployment and management

8. Strong understanding and practice of Agile projects (e.g. SCRUM)

9. Experience in working with Government Commercial Cloud is preferred.

Main Duties:

• Oversee the construction activities and progress, plan, implement and monitor work
• Schedule in accordance to the master and detailed work program
• Liaise with Professional Engineer on the Temporary works
• Liaise with consultants (QPS) for technical issues and coordinate the site activities with subcontractors
• Handle of technical and engineering problems
• Provide guidance to supervisors in relation to construction works, ensure progress according to schedule,
• Maintain quality standards, carry out site inspections and resolve technical issues on time
• Prepare report and method statement whenever necessary
• Manage and control workers and monitor their work closely to keep site safer and neat
• Supervise ongoing site activities closely

We are looking for an Electrical Engineer with 2-5 years working experience who would have the following experience / knowledge/ qualities :-

• Basic Electrical Building Services Design knowledge
• Familiar with local codes and standards (e.g SS 568, 560 etc)
• Able to perform cable size and voltage drop calculation conforming to local codes and standards. Familiar with earthing and lighting protection works.
• Familiar with CAD software and able to make minor modification independently.
• Self-motivated individual able to lead a team of supervisors and electricians independently.
• Coordinate with Project Team to execute the works including scheduling of works for the team.
• Coordinate and support Project LEW for Power Turn ON, Testing and Commissioning.
• Project progress monitoring & updating to Project Manager
• Able to communicate and present to client on project status etc.
• Able perform Bid Estimation and submission.
• Able to perform material take off from project drawings (e.g. cable containment routing drawings, small power and lighting layout etc)

Requirements

• Min Diploma in Electrical Engineering or equivalent
• Strong technical background with sound knowledge of electrical construction works
• Proficient in MS Office (e.g Excel, Word & Power Point)
• Possess good writing, communication and interpersonal skills
• Drafting knowledge using AutoCAD is an added advantage
• Working in a “Live” process plant is an added advantage.
• Fresh Graduates are welcome to apply

We are looking for an Instrumentation Engineer with minimum 5 years experience who would have the following experience/knowledge/qualities:-

• Familiar with local and international instrument and panel installation standards
• Hands on experience in calibration of instruments
• Able to Perform Loop checks
• Coordinate with Project Team to execute the works including scheduling of works for the team.
• Self-motivated individual able to lead a team of supervisors and Technicians independently.
• Project progress monitoring & updating to Project Manager.
• Able to communicate and present to client on project status etc.
• Able perform Bid Estimation and submission.
• Able to perform material take off from project drawings (e.g Hook up drawings, P&ID, Instrument index, I/O list etc)
• Proficient in MS Office (e.g Excel, Word & Power Point)
• Working experience in “Live” Process plants is an added advantage

Roles and Responsibilities

Cluster Setup and Maintenance:

• Install, configure, and maintain big data platforms like Hadoop Clusters, Elastic Search, Spark, Kafka, Hive etc.
• Set up and manage distributed file systems (HDFS) and NoSQL databases (HBase, Cassandra).
• Ensuring high availability and reliability of Hadoop, Kafka and Elasticsearch Clusters.

Performance Optimization:

• Monitor system performance, fine-tune jobs, and optimize cluster utilization.
• Manage and resolve performance bottlenecks in big data environments.

Security Management:

• Implement data security policies, user authentication (Kerberos), and access control (Ranger, Knox).
• Regularly review and plan patch systems to ensure data integrity.
• Apply updates, patches, and version upgrades to all managed systems.
• Ensuring the backward compatibility and minimal downtime during upgrades.

Backup and Recovery:

• Plan and implement backup and recovery strategies for big data environments.
• Develop disaster recovery solutions and test failover scenarios.

Workflow Automation:

• Design and implement workflows using tools like Apache Oozie or Apache Airflow.
• Automate cluster management tasks like upgrades and scaling.
• Developing shell scripts and Ansible Playbooks to automate routine tasks, including monitoring, backups, and deployments.

Monitoring and Support:

• Monitor logs, metrics, and system health using tools like Ambari, Cloudera Manager, or Prometheus.
• Provide 24/7 on-call support for production systems and resolve incidents.

Collaboration:

• Work closely with data engineers and developers to support ETL pipelines and data processing jobs.
• Collaborate with stakeholders to ensure big data systems meet organizational needs.
• Working transversally with other teams to guarantee high data quality and availability.

Cloud migration

• Migration planning from On-premises to GCP & AWS cloud

Required Skills and Qualifications

Technical Skills:

• Strong knowledge of big data ecosystems (Hadoop, HDFS, YARN, Hive, HBase, Spark, Kafka and Elastic Search).
• Proficiency in Linux/Unix system administration.
• Experience with monitoring tools like Nagios, Grafana, or Splunk, HPOMI.
• Scripting skills in Python, Ansible, Shell, or Bash.
• Familiarity with cloud platforms (AWS, Azure, GCP) and their big data services.

Soft Skills:

• Strong problem-solving and analytical abilities.
• Effective communication and collaboration skills.
• Ability to handle high-pressure production environments.

Preferred Experience

• 8-9 years of experience in big data administration or similar roles.
• Hands-on experience in scaling and managing large, big data clusters in production environments.

Interested applicants please send your resume in MS Word format and attention it to Tan Joanna (R1104661)

Shortlisted candidates will be notified

Data provided is for recruitment purposes only

www.ambition.com.sg

EA Registration Number: R1104661

Business Registration Number: 200611680D. Licence Number: 10C5117

Overall Summary:

Network Engineer will drive the implementation of strategy for infrastructure operations and maintenance to ensure availability of stable and secure systems. He/She manages project resource allocation and develops infrastructure implementation, operations and maintenance engineers; scopes out policies and sets performance expectations. He identifies problems and presents new methodologies and/or solutions to key stakeholders to enhance and improve the delivery of infrastructure operations and maintenance services.

Roles and Responsibilities:

Support infrastructure design and implementation

• Support technical system analysis to determine the extent to which solutions perform “as required” to ensure that future solutions meet anticipated demand
• Support the design and implementation of infrastructure solutions that adhere to current architecture standards
• Lead the design installations, system migration and integration
• Lead the testing and handover of implemented infrastructure solution

Support infrastructure operations

• Support delivery of optimal infrastructure operations
• Create documents on administration, installation, configuration and troubleshooting
• Apply diagnostic tools to perform technical analysis of complex software, hardware and infrastructure equipment
• Support the development of report on infrastructure capabilities and limitations

Maintain infrastructure

• Support the improvement of maintenance capability by using automation for upgrades, enterprise backup and storage
• Identify key infrastructure operations issues and maintenance priorities
• Support the implementation of agreed infrastructure change requests and maintenance routines
• Develop report on performance and availability of infrastructure systems by review of service uptime, utilisation, throughput etc.

Optimise infrastructure performance

• Support the initiatives to improve the infrastructure systems and service delivery through automation and virtualisation technologies
• Support the monitoring of performance, availability and security of infrastructure systems and key operational metrics

Resolve incidents

• Support problem/issue identification and resolution
• Escalate problems/issues
• Support simulation of user problems to resolve operating difficulties
• Diagnose problem source through discussions with users
• Recommend system modifications to reduce user problems
• Support planned maintenance events, system backup processes and disaster recovery drills
• Support implementation of preventive solutions

Qualifications/ Requirements:

• Bachelor in Computer Engineering
• Possessed CCNA, CCNP, CCIE is preferred.
• At least 5-8 years of network experience
• Experience in leading a team of 3-5 network engineer.
• Familiar with Cisco, F5, VM
• Exposure to large scale project execution
• Open to support patches/ upgrades and Tech refresh (after office hours/ weekends)

You will be a key member of the R&D Digital Translation team established under the Singapore Maritime Institute. The R&D Digital Translation team develops and operates digital and cyber products and translates R&D projects to real world implementations for the maritime industry.

You will be involved in the requirements gathering, development and testing of products as per evolving business needs as part of the end-to-end agile development lifecycle starting from UI/ UX Design to Cloud Engineering & Operations, Software Development, DevSecOps, Quality Assurance and Application Security.

Key Responsibilities

1. Participate in the requirements gathering sessions and contribute to the development of the functional/design specifications

2. Design algorithms and flowcharts to create new software programs and systems

3. Develop clean, efficient and extendable codes using HTML/CSS, Javascript, Java, .NET, React Native and other relevant programming languages.

4. Troubleshooting, debugging, maintaining and improving existing software

5. Perform code reviews and functional testing to ensure that standards are upheld.

6. Continuous review and refactoring code for reusability and reduce technical debt.

7. Work with QA Engineer to prepare test cases as well as entry and exit criteria for SIT and UAT to ensure that user requirements are met as described per product backlog

8. Work with Application Security Engineer to perform System Security Acceptance Test (SSAT), which includes Secure Code Review (SCR), Vulnerability Assessment (VA) and Penetration Test (PT) and remediate the security findings before seeking clearance and approval from CISO and CIO respectively

9. Maintain and update library of reusable APIs, components and modules

10. Develop technical documentation to guide future software development projects

Requirements

1. Background in Computer Science, Engineering or related disciplines.

2. Highly proficient in programming languages such as HTML/CSS, Javascript, Java, AngularJS, Bootstrap or other relevant programming languages

3. Participated in at least one full software or product development cycle, preferably using Agile Methodology

4. Excellent communication skills

5. Teamwork and collaboration skills

6. Possess critical thinking and problem-solving skills

Roles

The ideal candidate will be responsible for assisting the project manager and project team with project documentation and control, job cost accounting, scheduling, and construction supervision efforts. To be successful, this candidate should feel comfortable taking on many tasks that require various skills, and appropriately prioritizing those tasks' completion.

Responsibilities

• Assist with on-site management to ensure project success
• Ensure project plan is moving forward to meet anticipated deadlines
• Responsible for RFI and submittal process
• Processes owner billings and project related accounting issues

Qualifications

• Bachelor’s degree in mechanical or industrial engineering or equivalent experience
• 1 - 3 years' of experience as a project coordinator, project engineer, or project manager
• Strong experience in AutoCad and Microsoft Office Suite
• Familiarity with rules, regulations, best practices and performance standards
• Previous experience in the marine or engineering industry is a plus

Employment Type

Full-time

IT Infrastructure Support:

• Provide Level 1 technical support to end user, including software & network problem
• Deployment of new computer, including installation of software to end user
• Create & maintain end user account (AD & Email)
• Co-ordinate with external vendor for support
• Involve with infrastructure project & setting up new site office
• Responsible for new staff orientation briefing
• Provide onsite support to end user
• Ad-Hoc duties/task as per assigned

General:

• Create and maintain documentation on technical problem.
• Procurement of IT hardware and software
• Update & maintain IT inventory
• Disposal of IT hardware

Requirements:

• Nitec / Higher Nitec / Diploma / Advanced Diploma in IT
• Min. 2 years of experience or relevant working experience. Preferable with desktop support experience
• Basic Active Directory, Networking & MS365 skill. Candidate with Server, Hyper-V & Firewall knowledge is a plus point
• Good Knowledge on Microsoft Product
• Travel to various location around Singapore
• Able to work independent & multitask

Job Responsiblities :

• Responsible for environmental protection, safety and health, radiation protection and other new government announcements or revised laws and regulations.
• Responsible for the planning, reviewing and implementation of occupational safety and health management plan.
• Assist in the investigation of occupational accidents, and be responsible for external notification and declaration.
• Responsible for various environmental safety and health related Management Systems audits and inspections and tracking the gaps and recommendation for improvements.
• Responsible for the planning, reviewing and implementation of GHS, chemical classification management.
• Responsible for the audit of contractors, suppliers and licensed waste disposal companies.
• Responsible for the company's various environmental safety and health related education and training planning and implementation.
• Responsible for ISO 14001, ISO 45001, SS 651 and other management systems operation, maintenance and internal audit, and complete the external audit planning and execution.
• Responsible for the IH and Medical Monitoring program.
• Organize all Fire Drills and CERT related activities.
• Perform ISEP related project plan assigned by the management.

Job Requirements:

• A Degree qualification in a relevant discipline
• Min 2 years of relevant working experience in Semiconductor Environment,.
• An excellent team player with good interpersonal skill
• Strong logical thinking capability and good analytical skill
• Highly committed with good ownership and accountability
• Able to adapt in a fast pace environment and work under pressure

Roles & Responsibilities

Job description:

• Responsible for day to day Operations and administration on network & security infrastructure
• Responsible for firewall security appliances, routers and switches particularly trouble shooting and/or debugging network related problems.
• Perform support, configuration and maintenance of network equipment and network operating System
• Perform basic Linux administration and able to configure, manage network application.
• Handle network projects and identify any missing components in the infrastructure and support future demands on the network infrastructure.
• Good Knowledge troubleshooting, problem identification, problem resolution and/or resolution recommendation activities
• Must have experience in managing of Checkpoint firewall, Extreme, HPE, Cisco, Aruba Switches.
• Work with vendors to deliver the project scope and meeting project deadlines
• Proactively monitor network performance, ensuring high network availability and smooth operations
• Involve in Network and IT audit and adhere to security compliance and governance.
• Perform evaluation, proof of concept and provide recommendations.

Job Requirements:

• A Bachelor’s degree in Computer Science, Computer Engineering, IT or equivalent.
• Must be CCNA certified, CCNP preferred.
• Working knowledge plus at least a year’s experience in networking technologies like Structured Cabling, WAN, LAN, VPN, Network Security, Wireless, iBGP, eBGP, Routing Protocol, OSFP etc.
• Hands on experience in implementing, administering and troubleshooting network infrastructure devices, including cisco, Brocade routers, Dell enterprise and cisco switches, network firewall, IPS, SIEM, vulnerability assessment and monitoring tools.
• Experience in IPv6 and Data Centre operations an advantage.
• Familiarity with Linux (as a user and system), container technology, security concepts, project management and ITIL processes will be added bonuses.
• Familiar with Dense wavelength division multiplexing DWDM) is a plus.
• Familiar with basic Linux administration is a plus.