• PlanningCreating plans and specifications for projects, including safety considerations
• Managing staffAssigning tasks to crews, and ensuring projects are completed on time and to specifications
• Installing and repairing pipingOverseeing the installation and repair of piping systems, and ensuring they are done correctly
• Ensuring safetyEnsuring that the work area is safe, and that safety regulations are followed
• Conducting inspectionsRegularly inspecting piping systems to ensure they are installed correctly and functioning properly
• Monitoring progressMonitoring the progress of piping work, and ensuring it is completed on time and within budget
• CommunicatingCommunicating with clients, suppliers, and other stakeholders to ensure effective project execution
• Review and monitor engineering design progress related to piping work scopes.
• Understand P&ID and piping routine requirements.
• Understand non-piping design related requirements such as fabrication, erection, painting, QA/QC, testing and commissioning.
• Monitor the comments from Client and Classification Society.
• Monitor all the piping related interface points.

Requirements:

• Prefer to have at least 5 years of piping engineering related working experience or similar activities as describe above.
• Min. Bachelor Degree in Mechanical Engineering.
• Prefer to have experience in Offshore/Shipyard project, Rig building/Ship building.
• Prefer to have experience in FPSO project, both topsides & marine.
• Good knowledge in Piping Design.
• Good knowledge in International Standards related to Piping such as ASME, ASTM, API and Classification Society Rules and Regulations.
• Good skill in Excel is preferred.

Responsibilities

• Ensuring all sub-contractors comply fully with the relevant recommendations of LTA M&W requirements
• Preparing and submitting the Weekly & Monthly Quality reports.
• Follow up with conformity certificate, calibration certificate and plant calibration certificate from other agency.
• Maintaining the RIN Register and follow up with QPS for closing.
• Review daily inspection report and issuance of observation or NCR (Non Conformity Report) according to concerned department.
• To arrange QPS for inspection including the reinforcement cages, sitting out, guide wall, slurry quality (powder moisture, slurry density, viscosity & gel strength), final depth pf trench, trench profile check (koden alignment check), stop end, inserts, concrete slump, temperature, casting duration, cut-off level, ground level, backfilling (LSS) and lean concrete.
• To be physically present during Asphalt pavement work for Road diversion work.
• Study Shop drawing and liaise with design department on the design issue that may cause difficulty in production.
• To conduct mould inspection for every new mould and mould in use.
• Materials ordering
• To arrange production based on Daily Production Planning from planning department.
• Responsible for achieving the daily planned volume/productivity.
• To do prep our inspection together with production supervisor and RTO

Requirements

• Degree in any Engineering Discipline
• Minimum 5 years experience in QA/QC works in construction industry
• Experience in structural steel works or precast RC works
• Good interpersonal skills and communication skills

Interested applicants, kindly send your resume in MS WORD format to ref9 at trustrecruit.com.sg or please click on “Apply Now” and provide the below details in your resume.

*Pls summarise your experience at 'why hire me'

We regret only shortlisted candidates will be notified.

Important Note: Trust Recruit Pte Ltd is committed to safeguarding your personal data in accordance with the Personal Data Protection Act (PDPA).
Please read our privacy statement on our corporate website www.trustrecruit.com.sg.

Trust Recruit Pte Ltd
EA License No: 19C9950
EA Personnel: Charmaine Tin Zi Jin
EA Personnel Reg No: R23113892

About Us

We are the digital architects who provide end-to-end Enterprise IT solutions for our clients, our mission is to deliver cutting-edge solutions through innovation, dedication and a commitment to excellence.

Job Description

1. Collaborate with the support and development team to solve, deploy, and maintain cloud‐based and on‐prem solutions.
2. Take ownership of hosting or server-side issues; research, diagnose, troubleshoot, identify, and document solutions.
3. Perform server-side application management including upgrades, updates, patches, and smoke testing.
4. Provide support for customer’s infrastructure and products.
5. Execute system management changes, updates to configuration files.
6. Diagnose and resolve problems in high-throughput web applications and network services.
7. Assist in daily operational tasks and perform network, server, and VPN security and maintenance.

Job Requirements

1. Diploma /Degree in Computer Science or related studies.
2. Minimum of 1-year related working experience.
3. Senior roles are available for those with more experience.
4. Experience with Linux environment and excellent knowledge of Linux commands.
5. Strong troubleshooting skills.
6. Experience with Cloud technologies and DevOps is an added advantage.
7. Excellent customer service skills including direct interaction with users, assertiveness, and perseverance to follow issues to closure.

Why join us?

1. Young, dynamic and friendly working environment.
2. Wide growth opportunities, able to expose to the industry leading development technologies.
3. Opportunities to work with reputable clients in different sectors such as banking, education, telecommunication and more.
4. Led by a group of technical leads and managers who are experienced in implementing innovative solutions.
5. Competitive Remuneration Package.

Create and maintain optimal Database / DWH / Datamart architecture, which may include:

• Build the infrastructure required for optimal extraction, transformation, and loading of data from a wide variety of data sources using Informatica, SQL and related technologies

• Identify, design and implement internal process improvements.

i) Automating manual processes

ii) Optimizing data delivery

iii) Re-designing infrastructure for greater scalability

• Work with stakeholders to identify business needs and build/maintain Datamart

Participate in project and assist the user PM on the followings:

• To coordinate with IT and stakeholders on the completion of the UAT

• To create test cases/ test script

• To conduct UAT testing and post implementation phase

• Design, develop, and maintain scalable ETL/ELT workflows using Spark, SQL, and Python on the Azure Databricks platform.

• Build and optimize data pipelines on the ADA platform to support advanced analytics and business intelligence.

• Import and process metadata and data from multiple sources (e.g., S3 buckets) to support reporting and analytics.

• Implement data quality checks, data validation, and ensure accuracy in processed data.

• Hands-on experience in cloud services (Microsoft Azure) and data warehousing.

• Proven experience in predictive modelling, analytics, and creating dashboards for KPI tracking.

• Programming Languages: Python, Scala

• ETL Tools: Informatica, SAS

• Database Management: Oracle, MySQL, MS SQL Server, MongoDB

• Scripting: SQL, PL/SQL

• Development Tools: Eclipse, IntelliJ, Jupyter Notebook, Notebook

• Version Control and Build Tools: Maven, SBT, Git

• Methodologies: Agile, Scrum

• Operating Systems: Windows, Unix, Linux

• Microsoft Cloud Services: Azure Databricks, Azure Data Factory, Azure SQL Data Warehouse, Azure Data Lake Storage, BLOB Storage

As a Consultant, you will be responsible for analyzing business requirements and designing solutions using Ibm Planning Analytics.

You will work closely with stakeholders to identify opportunities for process improvement and provide recommendations for optimization.

Analyze business requirements and design solutions using Ibm Planning Analytics.

Collaborate with stakeholders to identify opportunities for process improvement.

Provide recommendations for optimization based on data analysis.

Conduct user acceptance testing and ensure successful implementation of solutions.

Utilize Business Process Design and other related tools to support project success.

Provide guidance to Developers in performing the build and unit test

Develop Test Cases and Test Scripts for Testing Phases

Provide fixes to defects raised during Testing Phase

Responsible for all customer business related activities such as requirement gathering, functional design, system configuration and design, testing and user training

Advise client on leading business solution and best practices

Provide functional and technical design and solution based on client’s requirements

Perform solution build, application configuration and unit test based on requirements and design

Mandatory skills :
1. 5 to 6 years of experience as an IBM PA consultant, able to understand client’s business process, gather requirements, propose solution and design using IBM PA, perform solution build

2. Knowledge and experience in EPM

3. Detail oriented, analytical and inquisitive Skills which are good to have / optional 1. Requirements Analysis 2. Business Model Strategy

4. IBM Planning Analytics

5. Business Process Design

6. Business Process Analysis Tool

EA License No: 11C4879 / Registration ID : R1218583

Apar Technologies Pte Ltd, Singapore

Job Description

• Industry/ Organization Type: Construction/ Quarrying
• Position Title: Logistics & Site Coordinator
• Working Location: Jurong Port
• Working Hours: Mon – Sat, 8 am - 5 pm (Irregular work hours depending on schedule)
• Salary Package: Basic Salary + AWS + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Distribute workforce and equipment to ensure smooth operations for unloading barges and vessels.
• Monitor the daily procedures for the arrival and departure timings of barges and vessels.
• Engage with port authorities to guarantee efficient operation and collaboration.
• Conduct daily documentation and report on logistics activities for barges and vessels.
• Monitor warehouse inventory ensuring optimal supply of goods for delivery to customers.
• Collaborate with the truck teams to secure transportation of company goods.
• Manage and ensure the safety of our workforce at work.
• Ensure that all machinery and equipment are consistently ready and operational.
• Flexibility to work irregular hours, adapting to the port operations' 24/7 schedule.
• Other ad hoc duties at worksites if required.

APPLY NOW!!!

• Minimum 1-2 years of experience in logistics coordination.
• Excellent planning, organizational and communication skills.
• Proficient in Microsoft Office applications.
• With a valid Singapore Class 3 driving license is preferred (Company vehicle provided for work use).

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #67053 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Role and Responsibilities

• To co-ordinate with the clients, subcontractors, and consultants on project matters
• Management, supervision and coordination of construction activities.
• Supervise team members, subcontractors and daily work activities on one or more project site(s) allocated.
• To ensure supervisors and workers meets client & regulatory requirements, environmental, safety and health requirements
• Monitor progress at site and put up progress claim.
• Coordinate and assist QS and Project Manager on project progress and claims.
• Other adhoc duties by management assigned from time to time.
• Participate in project design meetings and propose improvements.
• Evaluate potential problems and technical hitches and develop solutions.
• Plan and manage team goals, project schedules and new information.
• Manage project-related paperwork.
• Direct project correspondences by preparing and reviewing project proposals, memos, meeting minutes and emails.
• Communicate with clients to identify and define project requirements, scope and objectives.

Requirements

• Minimum Diploma Holder/ ANY
• Minimum 5 years' experience in site coordination.
• Excellent project management skills
• Team leadership
• Working knowledge of various computer software programs (MS Office, POS)

Requirements:

Minimum - bachelor’s degree in civil engineering

Job Description

1. Experience in Civil Engineering Design works in the area of;

- Structural Steel design

- Reinforced Concrete design

- Geotechnical Engineering Design

4. Able to work under rushing schedule of works

5. Able to do AutoCAD drafting (if required)

6. Familiarize with preparation of Authorities Submission documents (BCA, URA, JTC, etc..)

7. Able to communicate with clients and Authorities

Contract :

• 3 months - Jan 2025 till Mar 2025

Working Hrs:

• Monday to Friday, 8:30 am to 6:00 pm

Responsibilities:

• Maintaining computer networks including mainframes, VPNs, routers and other physical hardware
• Installing and configuring network equipment
• Creating firewalls and updating virus protection software and data security systems to keep data and communications protected

Qualification:

• ITE or higher

Experience:

• Min 1 year

Role:

Project Sales Engineer (Mechanical / Engineering Design)

• Mon-Fri 8.30AM to 5.30PM
• Tuas
• $3500 - $6000

Requirements:

• Bachelor’s degree in mechanical engineering or related field
• Minimum 3-5 years of related industry experience in project sales with a strong track record
• Strong technical skills in engineering design, analysis, and testing

Job scope:

• Follow up with site walk and client enquiry for the new job or project and work together with project engineer and manager for the quotation and tender submission, ensuring purchase order is secured.
• Coordinating with engineering, construction and liaise with the client on detail engineering requirements.
• Prepare quotation, budget plan and submission to have approval from project engineer or manager.
• Prepare method of statement, lifting plan and work schedule to provide safety personnel to prepare risk assessment.
• Prepare MTO and raise MR for all materials required for the project.
• Responsible for equipment installation, structure installation, piping erection operations and pipe support installation in accordance with schedule, procedures, specifications, priorities and availability of construction drawings.
• Handling all the technical queries and investigating all the work related problems, including the drawing of field sketches when necessary.
• Review of Project specification, ISO drawings and P&ID.
• Responsible for counter checking by ISO drawings, P&ID and GA drawings for the correct location, orientation, alignment and plumpness.
• Carrying out final P&ID check of installed piping systems in the module. Preparation of “AS BUILT” drawings.
• Responsible for carrying out mechanical clearance, conducting hydro and pneumatic tests, fulfilling commissioning and Pre-Commissioning requirements for the project.
• Responsible for line checking after hydro testing or pneumatic testing to complete the post punch list prior to sign-off the test packages before signing the completion of piping / mechanical.
• Ensure that all punch list items are resolved; client handover is satisfactorily concluded and that there is no prolongation of project.
• Take prompt corrective and preventive action to remove any quality issue, any unsafe elements and unhealthy conditions at site.
• Sales Cycle Management: Conduct the full sales cycle, including lead generation, follow-up, service delivery, and transaction closure.

✅ Wee Yuan Huan

✅ Reg No: R21100383

✅ The Supreme HR Advisory Pte Ltd

✅ EA No: 14C7279

• Assists Lead Engineer in developing concept for new project work;
• To develop Civil & Structural framing plans, layouts from concept stage to basic engineering stage to further detailed engineering stage for smaller to larger projects;
• Assists Lead Civil and Structural Lead in developing Civil and structural details, drawings, calculations, specifications for larger projects;
• Works independently in the detailed design, specifications, and calculations;
• Develops Expertise in carrying out design works to comply to local code requirements;
• Ensures that the drawings developed for the project comply to project standards/ company standards;
• Assists Lead Engineer in dealing with shop drawings, vendor print review and comment, if necessary or as advised by the Lead Engineer;
• Assists Lead Engineer working on developing necessary documents as per project requirement and also assist Lead Engineer in analyzing output results;
• Assists Lead Engineer in meeting with client in kick off meeting or other weekly meeting as and when needed;
• Provides guidance to the Assistant Engineer, Engineer in carrying out the design works;
• Visits Client site as and when necessary and as advised by Lead Engineer;
• Assists in technical report writing, compiling and coordinating;
• Assists Project Managers in achieving project completion within budget and on schedule;
• Addresses site issues related to design;
• Supports construction on solving process design issues. Visit site to check and analyses issues;
• Assists Project Managers in achieving project completion within budget on schedule;

Requirements

• Bachelor Degree in Engineering (Civil)
• Design and Construction experience preferably in industrial buildings with Precast and Long span roof trusses experiences
• Experience with checking of shop drawings for Precast and steel structures and able to do detailed Design and work in a team and able to provide details for computer aided design team
• Familiar with the Local authorities requirements for civil and structural submissions

Bayes advices leading technical businesses and progressive employers on talent acquisition, shaping perspectives and integrating recruitment expertise to fulfill critical and complex hires. If the role resonates with you and your professional experience complements the responsibilities listed, send your resume to [email protected]

Bayes Recruitment Pte Ltd
16 Collyer Quay, Singapore 049318
bayesrecruitment.com
EA License 10C5468 | EA Registration R2197948

Our website comprehensively shares our Privacy and Data Protection Policy, standards & compliance, and legal responsibilities. All personal data supplied will be treated in confidence, and as permissible by law. By submitting your resume for an application, you also consent that you may be contacted for future, or potential opportunities that may complement your expertise as applicable. You can opt out at any time by contacting our Data Protection Officer.

We are seeking a highly skilled Senior Software Developer to contribute to significant government projects!

• Join a team that utilizes technology to enhance the lives of Singaporeans.
• Agile development culture to promote continuous learning and growth.
• Competitive remuneration package. Hybrid working arrangement.

Responsibilities:

• Design and implement scalable backend solutions using Golang.
• Engage in Agile practices like sprint planning and daily standups, alongside Scrum methods such as code review and unit testing, ensuring iterative delivery of high-quality software.
• Collaborate with cross-functional teams to deliver high-quality software products.
• Participate in code reviews and provide feedback to improve code quality.
• Deploy applications to production and provide ongoing support.
• Spearhead initiatives to streamline build and release processes, leveraging DevOps principles and automation tools to enhance deployment pipelines.
• Troubleshoot and resolve technical issues in a timely manner.
• Identify opportunities for process improvement and contribute to continuous improvement efforts

Job Requirements:

• Singaporean only.
• Minimum of 5 years of experience in Software development, with at least 4 years in Golang, ReactJS and NodeJS.
• Prior hands-on experience in handling highly scalable distributed system, configuring automated build, test, and deploy pipelines to streamline the software delivery process.
• Proficient in REST and SOAP API.
• Experience in cloud-native technology, such as AWS (Related certification will be an added advantage.
• Hands-on experience with databases like Postgres, MySQL, and Redis.
• Proficiency with development tools like Visual Code and CI/CD tools (e.g., Git, Jira, Jenkins).
• Working experience in Agile environments or projects (Scrum/Kanban).

By submitting your resume, you consent to the collection, use, and disclosure of your personal information per ScienTec’s Privacy Policy (scientecconsulting.com/privacy-policy).

This authorizes us to:

• Contact you about potential opportunities.
• Delete personal data not required at this application stage.
• To withdraw consent, email [email protected].
• All applications will be processed with strict confidence. Only shortlisted candidates will be contacted.

Wong Vi Yin (Vanessa) – R24123532
ScienTec Consulting Pte Ltd – 11C5781

Location: Tuas

Working Hours: 12 hrs shift (2-2-3)

Job Scope:

• Support the shift operation in all activities, ensuring that it is meets all environmental, health and safety regulations.
• Support the STS in ensuring that all operation and maintenance activities are in compliance to the safety procedures for Lock out/Tag out, energy control procedures, line breaking activities, confine space entry, work at height, hot and cold work permitting.
• Ensure that the shop floor is in a constant state of safety and quality regulatory compliance and inspection ready
• Perform all production, pre MI and post MI activities to ensure manufacturing attainment is achieved, assist the STS in the deployment of resources based on criticality and priority.
• Assign operation task according to Manufacturing Standard Work (MSW) and Operation Standard Work (OSW)
• Participate in all troubleshooting activities in processing issues, deviations and coordinating with other functions when require immediate and preventive actions.
• Participate in all investigation, report and troubleshoot findings on both EHS and quality related issues observed during manufacturing or during batch record review.
• Participate in Continuous Improvement (CI) activities, contribute ideas and perform Plan, Do, Check, Action (PDCA) cycle
• Support the STS in the development of risk assessment, creation of job safety assessment and participate in HAZOP when required.
• Develop Standard Operating Procedures as part of change control and perform periodic review.
• Assist in all commissioning, qualification and validation activities as necessary.
• Participate as a member of the emergency response team (ERT) when necessary.

Job Requirements:

• Min. Degree in Chemical engienering or any relevant field
• Some Pharma Manufacturing intern experience

For interested applicants, please send your updated resume to: [email protected]
All candidates’ information will be treated with the strictest confidence
Melissa Zhang Zhiqi (Mezzo)
R2197564
Recruit Express Pte Ltd
99C4599

Assurity Trusted Solutions (ATS) is a wholly owned subsidiary of the Government Technology Agency (GovTech). As a Trusted Partner over the last decade, ATS offers a comprehensive suite of products and services ranging from infrastructure and operational services, authentication services, governance and assurance services as well as managed processes. In a dynamic digital and cyber landscape, where trust & collaboration are key, ATS continues to drive mutually beneficial business outcomes through collaboration with GovTech, government agencies and commercial partners to mitigate cyber risks and bolster security postures.

We are looking for a Cloud Infrastructure Engineer (Endpoint Security) to join us!

Responsibilities:

· Work with Product Owner and Product Principals to operate the various endpoint security tools, including:

- EPP/EDR

- Data Loss Prevention

· Work with Central ICT Infra teams to operate the on-prem components of the SSE platform.

· Conduct system health check and proactively identify and troubleshoot issue in end-to-end manner.

· Manage the change, release, incident, problem management processes in ITSM platform.

· Document the requirement and specification to address the needs for all Public Service agencies.

• Comfortable with a 5-year direct contract
• At least 5 years of experience in the above domain areas

Join us and discover a meaningful and exciting career with Assurity Trusted Solutions!

The remuneration package will commensurate with your qualifications and experience.

We thank you for your interest and please note that only shortlisted candidates will be notified.

By submitting your application, you agree that your personal data may be collected, used and disclosed by Assurity Trusted Solutions Pte. Ltd. (ATS), GovTech and their service providers and agents in accordance with ATS's privacy statement which can be found at: https://www.assurity.sg/privacy.html or such other successor site.

Benefits

• A wholly-owned subsidiary of GovTech.
• We promote a learning culture and encourage you to grow and learn.
• A competency framework is in place to help you grow your career with us.

Job Description

• Industry/ Organization Type: Manufacturing/Semiconductor Technology
• Position Title: Product Engineer (Automation/Electromechanical Equipment)
• Working Location: East Area (Nearest MRT: Bendemeer)
• Working Hours: 5 days Monday – Friday, 9 am – 6 pm
• Salary Package: Up to $5,000 + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Set up and troubleshoot semiconductor equipment.
• Document engineering enhancements for continuous improvement and future reference.
• Develop procedures for the assembly, inspection, and testing of equipment.
• Collaborate with the engineering and software teams to enhance system designs.
• Work alongside cross-functional engineering teams to troubleshoot and resolve system issues.

APPLY NOW!!!

• Min. Diploma in Mechanical or Mechatronics Engineering.
• At least 2 years of experience in setting up and managing automation equipment.
• Possesses a thorough understanding of electromechanical systems.
• Willingness to travel internationally for field support as needed.
• Availability to work overtime when required.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #69727 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Markus Tan | EA Reg No.: R24124040

Job Description

• Industry/ Organization Type: Manufacturing/Semiconductor Technology
• Position Title: Product Engineer (Vision Inspection Systems)
• Working Location: East Area (Nearest MRT: Bendemeer)
• Working Hours: 5 days Monday – Friday, 9 am – 6 pm
• Salary Package: Up to $5,000 + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Assist in component selection, engineering evaluations, and testing of parts and sub-modules for vision inspection equipment.
• Design electrical parts and sub-modules for vision inspection systems.
• Maintain product design documents, including drawings and BOM (Bill of Materials).
• Work closely with and manage suppliers to ensure all design requirements are met.
• Provide troubleshooting expertise for design and system issues.
• Plan and coordinate the release of new designs to manufacturing.

APPLY NOW!!!

• Min. Diploma in Electrical or Electronic Engineering.
• Familiarity with CAD software for electrical layout and schematic design.
• Experience working with PC hardware, Windows OS, and relevant software.
• Knowledge of PCB/PCBA design, fabrication, and testing processes is a plus.

Please apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #69795 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Markus Tan | EA Reg No.: R24124040

Key Responsibilities:

- To advise construction site personnel (clients) on the safe and efficient use of SGB products.

- To check that the equipment had been erected in accordance with the relevant SGB drawings/design.

- To work with our Design Engineers to solve design changes due to construction site/structural changes.

- To contribute towards an efficient and safe Operations Department.

- To ensure site diaries and inspection forms are completed regularly and accurately.

Key Competencies/Skills:

- Good interpersonal skills.

- Good analytical and reporting skills.

- Planning, organizing and time management.

- Good communication skills.

Qualification & Experience Required :

- Secondary School level /Diploma Engineering.

- At least 5-8 years experience in similar job nature.

- Ability to read drawing.

- Problem solving.

Purpose and Scope

• As a key member of maintenance team, you will be working with a dedicated team and responsible for the gas plant and service corridor IAC maintenance with the aim of meeting performance targets of reliability and availability and complying fully with regulatory requirements, company policies, SOPs and HSSE standard.

Key Roles and Responsibilities

• In-charge of field I&C device and instruments including flow meter, flow computer system, gas chromatography, online analyzer, sensors, transmitter, gauge, as well as DCS/PLC in gas receiving terminal, end user’s metering skids and utilities customers metering station and battery limit. To ensure proper maintenance and good working condition of field instrumentation and control system to achieve high reliability.
• To plan and ensure adequacy of IAC preventive maintenance for gas plant, gas metering skids and utilities metering stations.
• To lead technicians and manage contractors to execute IAC preventive maintenance program according to schedule.
• To prioritize and execute the corrective maintenance work timely
• To ensure field instrumentation and metering equipment with valid and up to date calibration/validation with proper documentation records of certificates and reports.
• Co-ordinate with all end user and vendor/contractor for I&C planned and unplanned maintenance/calibration/rectification works.
• Review performance of the entire I&C device & metering equipment to determine limitations. Review periodically and adopt changes with upgrading of IAC devices & instruments to improve its functionality and reliability.
• Responsible for the budget planning for IAC and proper utilization of the budget with cost optimization.
• Withdraw and prepare spares from warehouse for job execution. Keep track of the spares level to ensure sufficient maintenance spares are available.
• Work under company’s Permit to Work system as competent person (CP) to apply permit. Supervise contractors and liaise with other maintenance crafts and operations technicians to execute maintenance activities
• Develop MSRA for IAC maintenance activities and Review MSRA from vendor and conduct toolbox meeting/pre-task talk for all I&C activity.
• Support other maintenance function, operation and other departments as when needed.

Qualifications & Experience

• Degree in instrumentation Engineering or Electrical/Process Engineering with relevant training and experience in instrumentation and control related to process industry. IAC diploma holder with process industry experience will also be considered.
• 3~5 years for Degree holders or 7~10 years for Diploma holders
• Hands on experience on maintenance/troubleshooting of field instrumentation (meters, control valves, analyzers, chromatographs), metering calibration/validation and remote monitoring/control system in a chemical/petrochemical/utility/power industry
• Class 3 Driving license

Skills/Competencies & Preferred & Characteristics

• Subject expert in instruments and control matters
• Competent in interpreting engineering drawings including P&ID
• Knowledge on local and international standards pertaining to metering/metering calibration
• Resourceful about reputed IAC vendors
• Good planning, organizing, and troubleshooting skills.
• Good team player and able to deliver results within tight deadlines
• Strong interpersonal, communication and presentation skills
• Self-driven, independent with positive attitude and willing to learn.
• Possess good leadership skills

Location: Tuas West (transport pickup from Jurong East/ Choa Chu Kang)

Working hours: 8am to 5.15pm (Mon to Fri)

• Ability to read and interpret customer’s tender technical specifications
• Provide costing reference to sales admin/proposal team for cost and delivery estimate.
• Work and furbish all technical related document including (but not limited to) technical clarification, datasheet, proposal drawing and tender technical answer sheet
• Participate in tendering and quotation activities whenever technical support is required; also to support sales and marketing team from technical perspective when needed.
• Collaborate with Sales, Engineering and Procurement teams to gather necessary information for proposal development
• Able to work in fast paced environment and meet tight schedules
• Other ad hoc duties assigned

Requirements

• At least 5 years of experience in oil field wellhead equipment companies (subsea or surface); At least 3 years’ experience in engineering position
• Bachelor’s Degree in Engineering or related fields
• Prior experience in tendering and customer interfacing with oil companies (i.e. via meeting, phone call, written form tendering clarification etc.) will be an added advantage

Interested applicants can send their detailed resumes to [email protected] or call JANE @ 6735 1955.

JANE LUI JIE'EN

CEI: R1104482

Company Reg. No. 199601303W || EA Licence No. 99C4599

We regret that only shortlisted candidates will be notified.

Job Description

• Industry/ Organization Type: Engineering Service Provider
• Position Title: Project Engineer (Oil & Gas / Petroleum / Chemical)
• Working Location: West – Bukit Batok
• Working Hours: 5 days (Mon-Fri: 8.30 am - 5.30 pm)
• Salary Package: Up to SGD 5000 + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Acting as the principal technical liaison among the project team, customers, subcontractors, and the company.
• Reviewing project specifications and related documents.
• Ensuring the implementation of good engineering standards and practices.
• Focusing on understanding and solving customer technical problems to improve satisfaction.
• Maximizing project profitability through appropriate material buyout and engineering approaches.
• Developing and completing major engineering deliverables according to the Vendor Document Schedule.
• Managing design, analysis, and drafting to meet technical and schedule requirements.
• Handling quality control, including maintenance of non-conformance reports (NCRs) and specification waivers.
• Coordinating with the Document Controller to ensure adherence to technical and document control processes.
• Interfacing with the Project Manager for engineering deliverables and resources.
• Preparing material requisition specifications and conducting goods receipt inspections.
• Supervising fabrication/installation work and assisting with internal testing and FAT.
• Preparing final and As-built documentation, as well as Operation & Maintenance Manuals and Manufacturer Data Records.
• Promoting and developing solution capabilities and application knowledge to support current and future projects.

APPLY NOW!!!

• Min. Diploma in Instrument/Electrical/Chemical Engineering or equivalent
• Min. 2 years of relevant working experience in a similar industry
• Knowledge of Oil & Gas, Petroleum, or Chemical Industries would be preferred
• Familiar with Microsoft Office with knowledge of AutoCAD will be an added advantage

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #68467 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

Job Description

• Industry/ Organization Type: System Integration
• Position Title: Electrical Engineer
• Working Location: West (Nearest MRT: Tuas Link) – take 6 bus stops to reach the company
• Working Hours: 5 days (Monday to Friday: 9 am-6 pm)
• Salary Package: Up to SGD 4000 + AWS + Variable bonus
• Duration: Permanent

Key Responsibilities

• Design and prepare electrical drawings for control panels
• Sizing of cables, CB, and other components for control panels
• Instructing technicians on assembling control panels
• Supervising and instructing technicians during offsite maintenance or repairs of control panels
• Able to troubleshoot and repair electrical faults in control systems
• Program and configure VFD, temperature controller, and other devices
• Managing and organizing the equipment and inventory on the shop floor

APPLY NOW!!!

• Min. Diploma in Electrical Engineer
• Min. 3 years of working experience in the related field, especially experience with designing and preparing electrical drawings for control panels
• Possess technical skills and knowledge of Transformers, Motors, Motor Starters, Testing and Commissioning
• Familiar with AutoCad
• Knowledge of PLC programs (ABB) will be a plus

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #67518 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

Job description:

• Client currently has several ongoing projects on the Azure platform, including Finance, Commercials, and Operations. This role requires a support engineer primarily focused on existing projects and understanding the team's dynamics.
• The role requires someone capable of directly addressing system issues and resolving them.
• Users report issues, such as error messages and screenshots etc. The data engineer needs to log into the production system, trace processes end-to-end, identify the root cause, and resolve the problem.
• The engineer is expected to verify the accuracy of data and processes, ensuring correct numbers and outputs.)Operations

Requirements:

• At least (2) years of hands-on experience as Azure Data Engineer using:

- Azure Data Factory - Azure Synapse Analytics / Data Warehouse Preferably with relevant certifications from Microsoft including Azure Data

• Preferably with relevant certifications from Microsoft including Azure Data Engineer Associate
• At least (2) years of hands-on experience in

- Performing data Ingestion using Data factory & T-SQL stored procedure and data harmonizing

- Implementing Data Quality validation

• At least (2) years of hands-on experience in

- Providing technical support (80%) & enhancements (20%) for existing applications in Azure

Purva Sholapurkar

EA Licence Number: 23C2060

Registration ID is R22109878

Disclaimer: The company is committed to ensuring the privacy and security of your information. By submitting this form, you consent to the collection, processing, and retention of the information you provide. The data collected (which may include your contact details, educational background, work experience and skills) will be used solely for the purpose of evaluating your qualifications for the position you're applying for. Your data will be stored securely and retained for the duration necessary to fulfill our hiring process. If you are not selected for the position, your data will be kept on file for a limited period in case future opportunities arise. You have the right to access, correct, or delete your data at any time by contacting us at Quess Singapore | A Leading Staffing Services Provider in Singapore (quesscorp.sg)

We are hiring Process Engineer to be outsourced to our clients from reputable healthcare organizations.

Apply now!

Job Scope

• Develop and maintain Manufacturing/Operating Instructions and SOPs.
• Manage and troubleshoot process control system recipes/models.
• Conduct technical assessments and process evaluations.
• Investigate and resolve quality and EHS issues during manufacturing or batch record reviews.
• Implement and monitor preventive measures for process issues.
• Ensure adherence to site safety and quality standards.
• Identify and drive improvements in processes and equipment.
• Regularly update plant personnel on process changes.
• Train process technicians and engineers on procedures and best practices.
• Oversee key equipment/GMP systems, ensuring compliance during internal and external audits.

Job Requirements

• Degree in Engineering, preferably in Chemical Engineering or Degree in Science with Major in Chemistry.
• 2 - 4 years of experience Pharmaceutical/Chemical Plant with some understanding of API unit of operations
• Good knowledge of Good Manufacturing Practices.
• Excellent interpersonal and communication skills, both verbal and written
• Strong team player, adaptable and versatile with the ability to work across different cultures.

All Interested candidates are invited to email your resume in MS Word format to:

[email protected]

Please include your full working experience, education background, notice period, expected salary.

Sheryl Tan Shan Pei
Outsourcing Team
Recruit Express Pte Ltd
Company Reg. No. 199601303W | EA License Number: 99C4599

We regret to inform that only suitable candidates will be shortlisted for an interview.

• SGD 5,000 – 7,000 + Variable bonuses
• Consultancy handles projects in major flagship infrastructure & building projects government agencies(LTA, NParks, HDB, etc)
• Excellent career progression + Equal opportunities for advancement
• Attractive employee welfare benefit
• Wide range of projects grant a competitive advantage for future career progression
• Location: Site stationed | 5.5 work days

Responsibilities

• Oversees and inspect building project on day-to-day operations
• To liaise and coordinate with relevant authorities and Contractors
• To manage and develop project schedule and to ensure compliance with authorities’ requirements,
• To establish and monitor safety and risk management and performance of environmental control measure

Requirements:

• Degree in Civil/Structural Engineering from a recognized Institution;
• Have at least 4-5 years of experience

Applicants are encouraged to include the following in their resume:

1. Expected salary
2. Notice period
3. Past project details – what kind of construction/building, etc

We regret to inform that only shortlisted candidate will be contacted.

Encasa Asia Employment Services LLP

EA Licence No: 13C6898