Job Description:

• Analyze SPC charts using SPACE. Know all the PR rules and their significance. Do proper annotation to maintain quality troubleshooting rate for SPC OOC. Understand Cp and Cpk indices
• Monitor critical SPC charts daily. Perform process window study and provide improvement plan to reduce OOC and improve CPK
• Analyze split lot, DOE data, ET, sort yield using JMP, Klarity ACE.
• Create SPC charts, DCOP and modify SLDB using PROMIS (Si-View).
• Upload recipe, check recipe and ensure recipe content compliance using RMS.
• Follow up on SPSR, MRB, 8D, TECN, or spec update with ECN.
• Setup and troubleshoot in recipes/ job files in all metrology tools within the Module.
• Follow up on passdown to troubleshoot process issues. Establish CAS / procedures to be followed and work with other departments for resolution if required.
• Startup and qualify new process and new equipment within scheduled timeline. Work closely with the Equipment Engineer on new equipment acceptance. Know the concept of repeatability and reproducibility (R&R) run.
• Work on reducing process constraint so that Mfg can have more flexibility.
• Perform process matching between equipments to reduce variation and analysis / DOE to find factors for better tool matching.
• Participate in CIP programs to optimize process window, cost, yield, and productivity.
• Work as a team with both Equipment and Mfg Engineers to meet Module objectives. Work to meet the key indices of Uptime and OEE goals.
• Represent own Module to attend cross-functional task team to address yield improvement/ excursion issues. Follow up with cross-fab benchmarking activities to engage the best-in-campus practices across fabs.
• Self audit and update specifications/ documentation to meet TS16949 Quality Standard requirements.
• Follow good housekeeping and safety rules in office and FAB.
• Provide feedback/ training to AEs or Techs on their troubleshooting skills, understanding of processes, decision making, risk assessment.

Requirements:

• Degree in Electrical / Electronics / Microelectronics / Chemical Process / Chemistry / Physics
• Min 2-3 years of relevant work experience in Etch Process
• An excellent team player with good interpersonal, communication and written skills
• Strong logical thinking capability and good analytical skill
• High level of integrity with strong leadership attributes to lead and coach a team
• Highly committed with good ownership and accountability
• Able to adapt in a fast pace environment and work under pressure
• Proficient in MS Office Applications

NextLabs® is the leading provider of policy-driven information risk management (IRM) software for large enterprises, provides an exciting opportunity for Senior Software Engineers to join hands with highly talented software engineers in building the next generation data protection and entitlement manager products. Our customers include many prominent enterprises in Aerospace & Defense, Financial Services, and High-Tech Manufacturing and Engineering industries. NextLabs’ flagship data protection and entitlement management products, Enterprise Data Protection and Compliant Enterprise®, combine with the Control Center XACML-based policy management platform with integrated content aware and identity-driven enforcement technology to offer the most comprehensive information risk management (IRM) solution. Our products preserve confidentiality, prevent data loss, and ensure compliance across more channels and more points, within a single unified solution with the unmatched user acceptance and Total Cost of Ownership (TCO).

We’re looking for highly motivated software engineers to join our global agile scrum team responsible for designing and building cutting edge solutions and next generation containerized products deployed in cloud (AWS/Azure/GCP). A successful candidate will be part of a learning culture, where teamwork and collaboration are encouraged, excellence is rewarded, and diversity is respected and valued.

Responsibilities:

· Write well structured, testable, efficient, reusable, maintainable and scalable code

· Collaborate with global teams to define, design, and develop cutting edge software applications, micro services and APIs on cloud using Java.

· Stay up-to-date with software technologies and methodologies

· Work with Professional Services to ensure solution is supportable

Requirements:

· Possess at least a Bachelor's Degree/Diploma in computer science or a related field.

· Good understanding of software architecture, programming practices and design patterns in Java.

· Hands-on in Spring Boot, Spring MVC frameworks, Hibernate, Junit, Gradle/Maven.

· Experience in building REST APIs

· Working knowledge of one or more RDMS like Postgresql, Oracle, Microsoft SQL

· Experience with Docker and orchestration frameworks like Kubernetes is a plus

· Understanding of one or more cloud platforms like AWS, GCP, Azure, OpenShift, Rancher is a plus

· Basic knowledge of UNIX, shell scripting

· Strong organizational and communication skills

· Strong analytical skills

· Self-motivated and ability to learn new technologies

· Minimum of 4 years experience

Interested candidates may send resume to [email protected] or use our online form at https://www.nextlabs.com/career.

Overview: -

• 5 Days (Monday to Friday), Office Hours
• East - Loyang
• Monthly Base Salary: $2700 - $3500 (Based on working experience)
• AWS (13th Month) + Variable Bonus

Your Responsibilities: -

• Maintain and update documents and records related to ISO 9001, ISO 14001, and ISO 13485 systems
• Establish and maintain proper documentation control and distribution
• Conduct internal and external audits
• Liaise with external auditors and certification bodies
• Generate monthly reports
• Review and update Quality Management System procedures
• Ensure system compliance
• Manage internal and external corrective action reports
• Plan and conduct periodic system audits
• Maintain and regularly review calibration and preventive maintenance for instruments and equipment
• Direct and head internal audit programs and recommend improvements for internal audit policies and procedures

Requirements: -

• Minimum 2 years of working experience in QMS and ISO 9001 audit, preferably in manufacturing industries
• Good knowledge of ISO 9001, ISO 14001, and ISO 13485 quality system
• Knowledge in preparing FMEA and Control Plans

Interested applicants may click "Apply Now" or email to [email protected] to submit your application.

By submitting your personal data and/or resume, you will be deemed to have agreed and consented to us collecting, using, retaining, and disclosing your personal information to prospective employers for their consideration.

We regret to inform that only shortlisted candidates would be notified. We wish you the best of luck!

Recruit Lync Pte. Ltd. | EA Licence Number: 22C1000

Jonathan Chang Sing Erh | EA Personnel Licence: R22110541

You will develop and implement individual network solutions and you excel when it comes to

troubleshooting. Occasionally, you will support the sales department as technical pre-sales Subject

Matter Expert (SME) and you will answer all questions related to the technical specifications, features of

the products, designs, and solutions. You will develop, document, present, implement, and fine-tune

network solutions. Furthermore, you will empower our customers in making informed decisions by

developing workshops and trainings and conducting them onsite at their location.

YOUR RESPONSIBILITIES:

• Engage customers and vendors to deliver a fit-for-purpose and future-proof solution design

that meet their business objectives, adhering to project delivery framework and vendors’

product lifecycle.

• Develop and implement infrastructure projects adhering to project scope of work, timeline,

budget, with quality.

• Develop concise project documentation such as Low-Level Design,

Migration/Implementation MoP, User Acceptance Test, User Guide documents.

• Assist Sales or Solution Architect to provide technical specifications, Scope of Work, effort

estimation in responding to customer’s request or RFP process.

• Act as solution expert to support issue resolutions for project issue escalation that

impacting deliverables, quality, or timeline.

• Provide technical expertise to other team members, as well as with other avodaq teams in

Singapore and globally.

• Keep up to date with the latest technology products in network infrastructure, to provide

high-quality support in current and future services.

YOUR PROFILE:

• IP experience includes:

o Cisco Catalyst, Cisco Nexus, Cisco ASA, Firepower, IOS, and ISR Routers

o NGFW with Fortinet, Palo Alto, or Checkpoint Firewall

o WAN & Routing (OSPF, EIGRP, IS-IS, BGP)

o Switching Technologies (STP, VLAN, VXLAN)

o Network Authentication (ISE, 802.1x, Radius, Active Directory, Posture, Profiling)

o Network Design

o QoS

o Wireless Technologies (WLC, WLM, 802.11ac, WMM, PEAP, TLS, Site Survey)

o AI/ML delivered Assurance with Catalyst Center

o Network performance measurement and monitoring such as Cisco Prime, Solarwinds,

MRTG, PRTG

• System experience includes:

o Linux/Unix

o Microsoft Windows Active Directory, DNS, DHCP, and MS Server

o Virtualization (VMWare, Hyper-V)

o Cloud experience with AWS, Azure or GCP will be an added advantage

• CCNA or CCNP certification

• 3 - 5 years’ experience in field or service engineering, specifically on network, wireless, and

network security projects

• Fluency in English and Chinese (both written and spoken)

• Pronounced communicative and presentation skills

• Ability to work in a team

• Travel readiness

OPPORTUNITIES:

avodaq IT consultants are among the best in the IT industry. The unique combination of consulting and

projects work offers many possibilities to continuously enhance your professional knowledge. The

position entails the possibility to become a Senior/Principal Consultant. To qualify for a higher position,

you will among other things, pass the CCIE examination.

• Location: Loyang Way, Loyang Industrial Estate
• Working Days: Mon - Fri
• Working hours : 830 a.m. to 530p.m.
• Salary : $3,000 - $4,500

Position Overview:
We are seeking a motivated and experienced Sales Engineer to join our team. The Sales Engineer will play a critical role in driving sales and delivering technical solutions that meet our clients’ needs. This role requires a blend of technical expertise and sales acumen, as you will work closely with customers to understand their requirements, present tailored solutions, and support the sales process from inception through to implementation.

Responsibilities:

1. Customer Engagement and Relationship Management:

• Develop and maintain strong relationships with key customers and stakeholders.
• Conduct needs assessments to understand customer requirements and challenges.
• Provide technical consultation to customers, offering solutions that align with their operational goals.

2. Sales Support:

• Scout, develop and obtain leads with new customers to develop sales in your assigned territory.
• Prepare and deliver compelling presentations and product demonstrations to potential clients.
• Develop detailed quotes and proposals, addressing customer needs and specifying technical requirements.

3. Service Support:

• Liaise with customers, end-users and purchasers to introduce the company’s service capabilities.
• Drive the sales of services to existing and new customers with equipment sold by the company.
• Coordinate with the engineering and service teams to ensure seamless project execution and delivery.
• Act as a point of contact for post-sales support, troubleshooting and sales of service.

4. Market and Product Knowledge:

• Stay up-to-date with industry trends, emerging technologies, and competitive landscape.
• Continuously enhance product knowledge and understand advancements in equipment and service offerings.
• Share insights, feedback and customer requirements with the product development and marketing teams to drive innovation.
• Participate in all company-participated trade shows and seminars in Singapore and abroad.

5. Training and Support:

• Educate customers on equipment features, benefits, and maintenance requirements.
• Conduct training sessions for customers and internal teams to ensure proper usage and understanding of products.
• Assist management with any other ad-hoc tasks and duties as and where required.

Requirements:

• Education: Bachelor’s degree in Engineering, Mechanical Engineering, Electrical Engineering preferred or related technical field, Minimum Diploma in related technical field.
• Experience: Minimum of 3 years of experience in a sales engineering role, preferably within the equipment sales and service industry.
• Technical Skills: Strong understanding of vacuum pump technology or other technical equipment. Proficiency in technical sales and solution design.
• Sales Skills: Proven track record in achieving sales targets and managing customer relationships.
• Travel: Required to support regional customers in Southeast Asia (30-40%).

If you are interested to apply, kindly WhatsApp me your updated resume in DOC file and allow our Consultant to match you with our Clients.

Whatsapp: +65 8525 2419

Email: [email protected]

Tan Man Ee Reg No: R22108289

The Supreme Hr Advisory Pte Ltd EA No: 14C7279

The role includes the following topics:

· Industrialization: Implement all necessary tools to manage the environments, the continuous integration, the continuous delivery and the processes execution.

· Environments: Manage and administrate environments from assembly to production (rules included), infrastructure implementation, and operational usage.

· Operations: Execute the maintenance operations, delivery and environment monitoring.

· L3: Operate as L3 on non-production environments for delivery teams and on production for support teams.

Main Responsibilities

· Participate to the automation of the deployment solution.

· Participate in environment preparation for testing phases.

· Participate in developing tools to simplify day-to-day activities on the program.

· Facilitate coordination between program developers and infrastructure engineers.

· Ensure continuous improvement and maintenance of the CI-CD pipeline.

· Provide investigation help while fostering knowledge and sharing best practices with team members.

· Document processes and ensure their properly followed.

· Ensure high standard delivery to production.

· Research, design, and develop software.

· Analyze user needs and develop software solutions

· Update software, enhances existing software capabilities, and develops and direct software testing and validation procedures.

· Work with other engineers to integrate hardware and/or software systems

· Develop specifications and performance requirements.

The position requires autonomy and reliability in performing duties while maintaining close communication with rest of project/support team.

Mandatory

· Software development or DevOps team.

· Java/J2EE development

· experience with Jenkins, GIT (GitLab)

· experience in Ansible

· experience in GitLAb

Good to Have

· Experience with DevOps methodology & tools like Jenkins, GIT (GitLab), Ansible, Docker/ Kurbernetes, CICD pipeline, Java dev context for the tooling, Database or Big Data storage systems, Grafana / Prometheus / Alert Manager / ELK / Kibana, Jira etc.

· Experience of grid computing.

· Basic understanding of finance and investment banking especially

Job Description & Requirements

Roles & Responsibilities: (IN BUILDING CONSTRUCTION)

• Assist Project Manager in planning, execution and completion of ACMV Project.

• Excellent project management skills, including the ability to manage timelines, budgets, and resources effectively.

• Supervise and liaise with relevant authorities / subcontractors / workers at site and ensure work performed on-site complies with local authorities’ requirements.

• Analyze, manage and track project costs against budget.

• Any other tasks assigned by the management.

Job requirements:

• Degree/Diploma in Mechanical Engineering or its equivalent

•Candidate with Specialist Diploma in Construction Productivity (SDCP) is an added advantage

• Work experience in ACMV or Mechanical Engineering in the construction industry.

• Good technical knowledge of ACMV system for Commercial Project.

• Good communication, interpersonal and problem-solving skills

• Possess a Class 3 license will be an added advantage.

*Salary is commensurate to working experience.

Please indicate the below information in your resume:

o Current & expected salary

o Reason(s) for Leaving

o Availability to commence work

We regret that only shortlisted candidates will be contacted.

About Our Client:

Our client is a leading engineering and fabrication company specializing in the design and fabrication of process equipment for the oil & gas, petrochemicals, chemicals, and energy industries. With over 50 years of experience, they pride themselves on their commitment to quality and innovation, operating from a state-of-the-art facility equipped for the fabrication of various materials.

Job Overview:We are seeking a dedicated and experienced QA/QC Engineer/Assistant Manager to join our client’s team. The successful candidate will be responsible for ensuring that products meet the highest quality standards and comply with industry regulations. This role involves overseeing quality assurance processes, conducting inspections, and collaborating with production teams to enhance product quality.

Key Responsibilities:

• Develop, implement, and maintain quality assurance policies and procedures.
• Conduct regular inspections and audits of manufacturing processes and finished products.
• Collaborate with engineering and production teams to resolve quality issues and improve processes.
• Prepare and review quality documentation, including quality plans, inspection reports, and non-conformance reports.
• Monitor compliance with industry standards and regulations, ensuring all products meet required specifications.
• Provide training and support to staff on quality control procedures and practices.
• Assist in root cause analysis and corrective action implementation for quality-related issues.
• Maintain accurate records of inspections, audits, and quality metrics.
• Support the preparation for external audits and customer inspections.
• Stay updated with industry trends and advancements in quality assurance practices.

Qualifications:

• Bachelor’s degree in Engineering, Quality Management, or a related field.
• Minimum of 3-5 years of experience in quality assurance/control within the engineering or manufacturing sector.
• Knowledge of industry standards (e.g., ASME, ISO 9001) and quality control methodologies.
• Strong analytical skills and attention to detail.
• Excellent communication and interpersonal skills.
• Proficiency in quality management software and tools.
• Ability to work collaboratively in a fast-paced environment.

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Interested Applicants
Please WA Jian Wei @ 87389860
Shortlisted candidates will be notified

Quek Jian Wei
Reg No. R22110928
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

Job Description & Requirements

Job Description & Responsibilities:

The Lead Quality Engineer will:

a) Cultivate a continual improvement culture and “design for quality” mindset within the project team.

b) Collaborate with cross-functional teams to ensure project processes comply with project specifications and Company requirements during the FEED and Execution Phases of the project.

c) Assist the Project Quality Manager in implementing the Project Quality Plan, which is developed by the Standards and Compliance section of the Project Management Office.

d) Assist the Project Quality Manager to ensure that the Project Execution Plan is duly followed by the Project Team.

Key Responsibilities

• Quality Focus: Develop and review Quality documents ensuring alignment to Company and Project requirements during FEED and Execution Phases.Assist the Project Quality Manager to implement and maintain the Project Quality Plan and other quality deliverables as per Company requirements.Conduct and participate in project audits according to the audit program, monitoring the resolution of findings and corresponding corrective actions.
• Collaborative Coordination : Engage with different departments, suppliers, and subcontractors as necessary to integrate quality requirements into project specifications.Assist to attend Technical Bid Clarification Meetings (BCMs) and review/response Technical Bid Clarifications during Feed Phase Assist in planning, promoting, organizing, and conducting QAQC training activities for the project team and subcontractors.
• Analytical Skills and Problem Solving : Monitor quality trends and prepare and present reports to the Project Quality Manager and relevant teams as needed.Collect, compile, and analyze relevant quality statistical data to measure/monitor quality performance level against project KPIsInvolve in investigation and addressing customer complaints regarding quality.Coordinate and monitor the root cause analysis of non-conformities, correction and corrective actions, and site observations.

Job Requirements

• Experience : Min. 10 years of QAQC experience with at least 3 years in a leadership/supervisory role. Min of 2 FPSO/FSO Projects Completion.
• Skills : Proven track record with strong coordination skills. Excellent planning and organizing skills.Excellent communicator Excellent collaborator with cross-functional teams In-depth knowledge of quality management system (ISO 9002, API Q1/Q2).

About i-Consult Tech Pte Ltd (I-Consult)

i-Consult Tech Pte Ltd (I-Consult) - a wholly owned subsidiary of the i-Consult Group HK Limited in Hong Kong -- is one of the leading IOT solution provider in Hong Kong, Macau & Singapore (Asia Pacific) region with the focus to help both Government and Enterprise sectors to select, architect and implement advanced & integrated IOT solutions to empower their business & operation.

i-Consult Group HK Limited is also a member of Cyber World Creations HK Ltd., who established since 2000, being a leading System Integrator providing industrial platform solutions and Design Manufacturing Services (DMS).

I-Consult provides leading edge one-stop-shop IOT solutions of modernized infrastructure, IT security, cloud platform, updated IOT devices and a broad portfolio of IT services that serve the needs of the sectors including education, hotel, residential & health care sectors.

We are committed to deliver top quality services by conforming to important ISO/IEC quality standards backed by our established best practices and effective service management systems and processes.

I-Consult offers an excellent value proposition with its expertise of experienced professionals, and offshore facility with state-of-the-art information technology infrastructure and competent associates at an extremely cost-effective price.

Part Time Systems Engineer

Responsibilities

We are seeking for a resourceful, experienced and committed individual to manage the following:

· Manage and track day to day progress of projects being assigned

· Perform project/application assessments and evaluation

· Assist test team in creating test plans and testing efforts

· Efficiently identifies and solves project/application issues

· Maintain application and project documentation

· Ensure sufficient, standard and reliable systems infrastructure

· Provide standby support for critical systems

· Provide daily IT technical support including system testing, system deployment and operational maintenance.

· Coordination, planning and execution of routine Maintenance job for contract customers.

· Assist with pre-sales and projects including coordinate, monitor and implement IT solutions for customers.

· Any other tasks and/or duties assigned by the supervisor or manager

· Ad hoc duties as assigned.

Requirements

· Possess at least a Diploma, Advanced/Higher/Graduate Diploma in EEE, Communications, Computer Science, IT, Mechatronics or equivalent.

· Min 2 years of project coordination experience

· Min 2 years of experience in coordinating and support IT business processes

· Knowledge in Java.Net and/or mobile development skills advantageous

· Basic knowledge MS-SQL Database administration including data backup, recovery, security and integrity.

· Familiar with Linux and Windows server environment.

· Experience/Knowledge on other database engines (ie. MySQL) will be advantageous

· Knowledge on Web or mobile application development and architecture will be advantageous.

· Strong interpersonal and communication skills

· Able to work independently and under pressure to meet system performance service levels

· Self-motivated with excellent customer service skill

· Able to multi task, work independently and prioritize workloads effectively

· Strong Interest in the field of IT, positive attitude and a willingness to learn

· Possess good analytical thinking and troubleshooting skill.

· Knowledge of RFID preferred.

· Good analytical and problem solving skills on technical level.

· Good teamwork and communication and planning skills

Interested applicants please email your detailed resume stating your working experience, earliest available date, current & expected salary and a recent CV / Resume to info@i-consulttech.com/[email protected]

Job Description

• To assist the Sales department to generate quotation
• Perform sales admin duties
• Handle any sale enquiries
• Any other task required by the company

Job Requirements

• Diploma in Electrical Technology or Building Services Technology (Mechanical /Electrical)
• Basic Computer Knowledge
• Training will be provided
• Applicant with experience in construction industry -Fire protection will be advantage

Civil Engineer Job Descriptions:

• Supervise and checking of all subcon and internal team, to ensure carried out in accordance to contractual specifications, quality standards, statutory compliance & client's requirements and safety.
• Assist Project Manager in all project matters, on-site technical/ engineering matters and authority submissions.
• Cooperate with site supervisor for all project and technical matters.
• Preparation of project weekly & monthly report, master schedule, micro task program, method of statement, construction sequence, hoisting plan, safe work procedure, risk assessment, any other technical documents.
• Co-ordinate works with Clients / Sub Contractors / Suppliers / Consultants.
• Plan & track the project progress, all site works, including program schedules and construction methods, forecast equipment, material and manpower requirement, and control usage and wastages of all aligning with the project completion timeline.
• Technical expertise and knowledge in foundation, structural and building and steel works
• Other adhoc duties by Management assigned from time to time.

Requirements:

• Degree in Civil or Structural Engineering
• 3-5 years civil engineering project management / building construction in construction industry
• Excellent leadership, time management, analytical, communication, presentation, and interpersonal skills
• Organized, meticulous with positive work attitude.
• Salary from $3,000 to $5,000

Senior Process Engineer

Yishun, Singapore

Who We Are:

Lumileds is a global leader in OEM and aftermarket automotive lighting and accessories, camera flash for mobile devices, MicroLED, and light sources for general illumination, horticulture, and human-centric lighting. Our approximately 5,500 employees operate in over 30 countries and partner with our customers to deliver never before possible solutions for lighting, safety, and well-being.

The Lumileds environment is fast-paced, cutting-edge, intelligent and fun! We are looking for exceptional talent to join our team! To learn more about our company and solution portfolios, please visit https://lumileds.com

Who You Are:

We are looking for someone for the Senior Process Engineer position, with experiences in Lithography (Coat/Expose/Develop/Critical Dimension/Overlay) process knowledge. Additional knowledge in the WET etch/cleaning and plating process will be an advantage.

Position Summary:

Lumileds is seeking a highly-qualified Process Engineer to take responsibility for Operations Engineering under Lithography and WET Engineering Module.

In this role, you will handle daily process related operations, and work with equipment engineers and shift team to sustain and improve the module KPIs.

What You Will Do:

· Process Owner for Lithography and WET/Plating processes on different layers/substrate.

· Take ownership and drive development in Lithography, and WET/Plating Process technology roadmap.

· Drive cost efficiency through innovative process simplification, improving productivity and optimizing current costs model.

· Drive improvement to optimize processes to meet the yield and quality requirements.

· Map-out / Design DOE to understand the interaction between process and hardware parameters and apply the results and knowledge to optimize for best performance

· Process improvement through conceptualize the ideas, characterize and optimize processes / applications needed for successful integration.

· Investigate, analyse root cause to problems with DMAIC systematic approach.

· Work with inter/intra departments on all continuous improvement activities.

· Actively lead, participate and manage project workgroups. Coordinate project activities for successful implementation.

· Prepare specifications, workflow, quality and safety related documentation; Monitor and optimize current procedures and propose necessary changes or improvements through proper documentation, SOP and OCAP.

· Process sustaining and control through SPC and periodic defect Pareto Analysis.

· Maintain Safety & housekeeping at all time for a safe work environment that is compliance to the safety regulations.

· Any other duties assigned by the Engineering Manager.

What You Will Bring (Required Qualifications):

· working experience in Lithography process engineering. Experience in the 6 inch technology and hands on/manual fab will be an advantage (ACT08, stepper, MkV, Micralign).

· Basic knowledge in the wafer fab fabrication is a must.

· Proven track record of problem solving and process improvement in a semiconductor manufacturing

· Possess a high degree of self-motivation, goal orientated and the ability to focus on solving problems and to learn new skills.

· Experience with manufacturing operation, failure analysis and LED knowledge will be added advantage.

· Self-driven leader and strong team player with keen technical ability, systematic approach, detailed-oriented, excellent problem-solving skills, and positive attitude.

· Good interpersonal and analytical skills.

· Ability to work independently, be hands-on and expected to dive into technical details as required.

Education (Minimum Level)

· Bachelor's

Field of Study

Chemicals, Materials Science, or relevant engineering degree is required.

Years of Experience (Minimum)

· 5 - 7 years

Preferred Qualifications:

· Additional experience and knowledge in the WET etch/clean and plating will be an advantage.

Lumileds is an Equal Employment Opportunity Employer

Position: Senior Broadcasting Engineer / Broadcast Audio Engineer x 2

• Salary: $6,000 - $10,000 + 15 Days AL + Bonus
• 5 Working Days, 9am-6pm
• Changi South (Between Tanah Merah / Simei / Expo MRT)

Requirements:

• Degree or diploma and aptitude relevant to Broadcast Engineering (specializing in Broadcast Engineering / Audio Engineering / IT or any other related area).
• Safety Knowledge: Good knowledge of the principles of safety at work as applied in the TV industry.
• Understanding of OB Systems: Understanding of Outside Broadcast systems and environment.
• Knowledge and experience of operating and troubleshooting a range of OB equipment in sound, communication, IP, etc.
• Minimum 3-8 years of work experience in Outside Broadcast Environment.
• Event Experience: Experience with large scale events is necessary.

Job Scopes: (Before , During & After Project)

• Assist the Engineering Manager with all technical tasks to ensure smooth running of daily engineering operations.
• Review the operations of the Engineering Department to ensure the quality of broadcast operations meet industry standards.
• Remain up-to-date with outdoor broadcast technology and equipment.
• Guide the Assistant / Trainee Engineers to read technical (Auto CAD) engineering drawings and plan for their training where needed.
• Ensure procedure for video equipment testing and preparation is in place.
• Ensure adequate processes are in place for communication / escalation of technical related problems that arise during a project.
• Keep Engineering environment (Warehouse, Engineering Room and desks) clean, functional, safe and presentable.
• Ensure compliance of engineering procedures with Health & Safety guidelines.
• Work with Head of Engineering to improve and test system designs.
• Supervise and schedule maintenance of specific categories of broadcast equipment to ensure the equipment are fully functional and well maintained (internally and externally clean/dust-free).
• Monitor physical and technical quality and appearance of broadcast equipment. Prepare the maintenance & improvement report.
• Plan and maintain a list of specific categories of broadcast equipment which require scheduled maintenance.

Chin Wai Loon Reg No: R24121618

The Supreme Hr Advisory Pte Ltd EA No: 14C7279

Position: Network Engineer [ Broadcasting ]

• Salary: $8,000 - $9,500 + 15 Days AL + Bonus
• 5 Working Days, 9am-6pm
• Changi South (Between Tanah Merah / Simei / Expo MRT)

Requirements:

• Bachelor's degree in Computer Science, Information Technology, or a related field.
• Minimum of 8 years of experience in network and infrastructure engineering in a broadcast environment.
• Extensive knowledge of networking protocols, including TCP/IP, UDP, RTP, and SMPTE 2022.
• Expertise in managing and maintaining Cisco network equipment, including routers and switches.
• Experience with broadcast technologies, including SDI, AES, and MADI.
• Strong understanding of virtualization technologies, including VMware and Hyper-V.

Essential Duties / Responsibilities:

Purpose: This role will have extensive experience in designing, implementing, and maintaining complex broadcast and IT systems in a live television or broadcast environment.

• Design and implement broadcast network and IT systems, including servers, switches, routers, firewalls, and storage solutions.
• Manage and maintain network and IT systems to ensure optimal performance and reliability.
• Collaborate with other teams to identify and resolve technical issues related to broadcast and IT systems.
• Work with vendors to evaluate and select new technologies and equipment.
• Develop and maintain documentation related to network and IT systems.
• Provide technical training and support to staff as needed.

Chin Wai Loon Reg No: R24121618

The Supreme Hr Advisory Pte Ltd EA No: 14C7279

Micron is seeking a highly motivated and experienced individual contributor to join our Assembly Package Technology Development (TD) team. As a Sr/Engineer in the Process Development team, you will play a crucial role in developing and qualifying new materials, equipment, and wafer tech nodes for Micron's world-class products and devices.

• Primarily responsible for Cleanroom 1 (CR1) Area processes such as Wafer Grinding/ Stealth Dicing/ Laser Groove/ Die Separation/ and Wafer Saw. Cleanroom 2 (CR2) Flip Chip Underfill, Die Attach, and Wirebond
• Development and Qualification of new direct and indirect materials, new equipment, and new wafer tech nodes.
• Ensure product quality and process performance while driving projects focused on cost reduction, productivity improvement, risk mitigation, and resolving manufacturing challenges.
• Collaborate and lead teams from various departments to ensure smooth development transfer to all Micron network sites.
• Familiarize and implement PMI (Product Maturity Index) methodology and provide accurate documentation for product transfer.
• Develop, configure, and optimize Package Assembly processes (Front End, Bonding, and Back End) for Micron's memory products from pathfinding to NPI start-up and certification.
• Collaborate with Design teams globally in the development of assembly design rules, involved in the design approvals (Substrate and Silicon), running, testing and upgrading systems and processes, and approving materials, process, and equipment changes in the CCB (change control board).

Requirements:

• Masters/Bachelor's Degree in Electrical & Electronic, Material, Mechanical Engineering, Physics & Applied Physics
• At least 5 years of experience in the semiconductor industry with proven knowledge and skills in assembly
• Excellent problem-solving skills and familiarity with data-driven analysis, statistical analysis, and data interpretation.
• Strong project management skills and ability to multitask to ensure the execution of timelines.
• Strong collaboration skills to work closely with diverse teams and gain insights into business needs and customers' requirements.
• Deep fundamental understanding of key risks in Cleanroom 1 processes and Cleanroom 2 process
• Multiple process capability is a plus

Test Engineer

Our reputable client is looking for a System Test Engineer (IT) to handle test plan, design, planning and setting up Test Lab. The incumbent is required to lead Installation, checkout, integration and testing (ICIT) at customer’s sites.

Responsibilities:

• Involved in System Test Plan and System Engineering Design.
• Responsible for Planning and Setting up Test Lab and conduct Factory Acceptance Test.
• The ability to perform Troubleshooting and Resolving System Faults and Perform On-Site Acceptance Test.
• Involved in lead project activities and coordinate with multiple stakeholders which includes suppliers, customers and other teams of staff for the project implementation

Requirements

• Strong in performing System Test and Design.
• Strong knowledge in handling Infocomm Technology, RedHat Linux, Virtual Environment, Network Security.
• Experience in handling System Test Plalnning and Troubleshooting.
• Minimum 2 years of System Test experience.
• Degree in Electrical & Electronics Engineering / Computer Science or equivalent
• Singaporeans Only.

We respect your privacy and all communication will be treated with confidentiality.

Please contact us or apply in-confidence to us with you updated MS Word Resume to : [email protected]

Yong Jeline (Reg. No. R1101621)

STAR CAREER CONSULTING PTE LTD (EA License: 20C0353)

• Support component selection, engineering evaluation, and testing of parts and sub-modules for vision inspection equipment.
• Develop electrical parts and sub-modules for vision inspection equipment.
• Update product design documents, drawings, and BOM (Bill of Materials).

Requirements:

• Diploma in Electrical/Electronic Engineering or equivalent.
• At least 2 years of relevant working experience
• Proficient in CAD software for electrical and schematic design, as well as PC hardware, Windows OS, and software.
• Knowledge in PCB/PCBA design, fabrication, and testing processes is an added advantage.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Automation Design Engineer

Job Responsibilities:

• 2D drafting and documentation
• Assist Senior Engineer in:
• Technical assignments (CIP, upgrades, End Of Life)
• Design/development of hardware products
• Evaluation of mechanical/electromechanical devices
• Develop, test, and document designs for:
• Transport mechanisms
• Vacuum systems
• Process stations (deposition chambers, substrate heating/cooling/cleaning)
• Participate in detailed product design
• Provide mechanical design inputs for design review (DFM, DFA)
• Prepare/release 3D Solid Models and Engineering drawings
• Communicate with local vendors for design parts/assemblies delivery
• Perform other related duties as assigned

Requirements:

• Higher NITEC (3-8 yrs exp) / Diploma (2-5 yrs exp) from reputable polytechnic / Bachelor's Degree (2 yrs exp) in Mechanical/Mechatronics Engineering
• Proficient in Solidworks (3D/2D design)
• Knowledge of Orcad or similar software (advantage)
• Experience in Machine Design (Semiconductor/Solar Equipment Design advantageous)
• Familiarity with Design Process (feasibility study to production realization)
• Knowledge of ECO release of Engineering quality documentation
• Experience in dynamic electromechanical system design
• High vacuum design and heat transfer experience (advantageous)

Interested candidates who wish to apply for the advertised position, please click on “Apply”. We regret that only shortlisted candidates will be notified.

EA License No.: 01C4394 (PERSOLKELLY SINGAPORE Pte Ltd)

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy

Interested candidates who wish to apply for the advertised position, please click on “Apply”. We regret that only shortlisted candidates will be notified.

EA License No.: 01C4394 (PERSOLKELLY SINGAPORE Pte Ltd)

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its affiliates to collect, use and disclose your personal data for the purposes set out in the Privacy Policy available at https://www.persolkelly.com.sg/policies. You acknowledge that you have read, understood, and agree with the Privacy Policy

• Singapore Based (Changi South - Between Tanah Merah / Simei / Expo MRT)
• 5 Working Days, 9am-6pm
• Salary: $8,000 - $9,500 + 15 Days AL + Bonus
• Bachelor's degree in Computer Science, Information Technology, or a related field; Minimum of 8 years of experience in network and infrastructure engineering in a broadcast environment
• Career Progression Opportunities

Essential Duties / Responsibilities:

Purpose: This role will have extensive experience in designing, implementing, and maintaining complex broadcast and IT systems in a live television or broadcast environment.

• Design and implement broadcast network and IT systems, including servers, switches, routers, firewalls, and storage solutions.
• Manage and maintain network and IT systems to ensure optimal performance and reliability.
• Collaborate with other teams to identify and resolve technical issues related to broadcast and IT systems.
• Work with vendors to evaluate and select new technologies and equipment.
• Develop and maintain documentation related to network and IT systems.
• Provide technical training and support to staff as needed.

Requirements:

• Bachelor's degree in Computer Science, Information Technology, or a related field.
• Minimum of 8 years of experience in network and infrastructure engineering in a broadcast environment.
• Extensive knowledge of networking protocols, including TCP/IP, UDP, RTP, and SMPTE 2022.
• Expertise in managing and maintaining Cisco network equipment, including routers and switches.
• Experience with broadcast technologies, including SDI, AES, and MADI.
• Strong understanding of virtualization technologies, including VMware and Hyper-V.

Kylen Seah Reg No: R24124248

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Project Engineer – Civil & Structural

This role will be positioned on a construction site; 50% working on CAD layout and temporary works design concept sketches and 50% site construction supervision and associated activities.

Job Responsibilities

1. Report and assist Construction Manager (CM) on project functions included but not limited to project site coordination, risk control management etc. to meet the project(s) goals.
2. Assist CM in project planning, implementation and to coordinate all construction works on the project site are in accordance to the master and detailed work program.
3. Prepare CAD drawings for site layout plans, temporary works concept sketches and liaise with design consultants to coordinate temporary works designs.
4. Prepare, plan and submit project related documents, such as schedules, method statement, design plan, risk assessment, monthly report, etc.
5. To supervise the execution of the construction works and ensure that the works are carried out in accordance with contract specification/bills of quantities, construction drawings, company’s quality standards, Environmental, Safety & Health (ESH) practices and all other contract documents.
6. To coordinate and liaise with Client’s representatives, relevant Authorities, Consultant, Subcontractors, Suppliers, etc. on all project aspects and need be, to provide all technical and non-technical resolutions followed by documentation.
7. Liaise with client or consultant for site inspections, submission of necessary technical reports and ensure necessary records are maintained at site. Assist Contract department (QS) in verifying progress payments and claims from Contractors.
8. Attend regular meetings with Client’s Representative, Consultants and/or Contractors and ensure the progress is on schedule
9. Be responsible for any other duties that may be assigned from time to time as your superior/management deem fit.

Job Requirements

• Bachelor Degree in Civil Engineering (may also consider Draftsperson with strong construction site and temporary works background).
• 5 years experience in site work including temporary works, piling, excavation, civil & RC structure works, coordination with authorities etc
• Strong analytical and critical thinking skills applied to planning for construction works,
• AutoCAD proficiency and ability to draw site and temporary works sketches,
• Good negotiation, communication and stakeholder management skills;
• Resourceful, independent and able to work in a fast-paced environment.
• Additional skills in Microsoft Project is advantageous.

We are seeking a skilled and detail-oriented Electrical Project Engineer with a minimum of 3 years of experience in electrical engineering, including at least 1 year of experience in data center projects. The successful candidate will manage and supervise the installation of electrical systems in data centers, ensuring all work meets project specifications, industry standards, and safety regulations.

Key Responsibilities:

• Project Management: Oversee and coordinate the installation of electrical systems in data centers, ensuring compliance with project plans, timelines, and budgets.
• Technical Supervision: Supervise subcontractors during the installation of electrical systems, including power distribution, UPS, and generators.
• Quality Assurance: Ensure all electrical installations meet quality and safety standards, as well as project-specific requirements.
• Problem Solving: Address any issues that arise during installation, troubleshooting electrical systems as needed.
• Collaboration: Work closely with the project team, contractors, and stakeholders to ensure smooth project delivery.
• Testing and Commissioning: Support the testing, commissioning, and handover of electrical systems to ensure proper operation.
• Documentation: Maintain accurate project records, including technical reports, installation documentation, and as-built drawings.
• Regulatory Compliance: Ensure compliance with local electrical codes and standards, as well as the company’s internal safety policies.

Requirements:

• Experience:Minimum of 3 years of experience in electrical engineering.
  At least 1 year of direct experience working on data center/oil&gas projects
• Technical Knowledge: Strong understanding of electrical systems, including power distribution, UPS, and generators.
• Project Skills: Proven experience in managing subcontractors and project timelines, with a focus on quality and safety.
• Communication Skills: Excellent communication and interpersonal skills, with the ability to work effectively with contractors and stakeholders.
• Travel: Willingness to travel to project sites as needed.

Process Engineer (Dry Etch)

Yishun, Singapore

Who We Are:

Lumileds is a global leader in OEM and aftermarket automotive lighting and accessories, camera flash for mobile devices, MicroLED, and light sources for general illumination, horticulture, and human-centric lighting. Our approximately 5,500 employees operate in over 30 countries and partner with our customers to deliver never before possible solutions for lighting, safety, and well-being.

The Lumileds environment is fast-paced, cutting-edge, intelligent and fun! We are looking for exceptional talent to join our team! To learn more about our company and solution portfolios, please visit https://lumileds.com

What You Will Do:

· Championing engineering experiments for process characterization to drive for quality, yield and cost down improvement.

· Establishing good process margins and inline controls for dry etch and measurement process.

· Troubleshoot out-of-control situations and process issues and put corrective actions in place.

· Drive productivity improvement through process optimization.

· Creating and updating of process specification and documentation of working procedure.

· Setup, monitor and maintain SPC charts.

· Sustain and/or improve Process Capability, CpK

· Establish Out-of-control Action System, specifications for procedures to be followed.

· Lead trouble-shooting of defect and yield issues and process excursions.

· Any other duties assigned by the manager.

What You Will Bring (Required Qualifications):

· Min 1-3 years working experience in semiconductor industry. Candidate with metrology background will be added advantage.

· Self-driven and strong team player with keen technical ability, hands on, systematic approach, and positive attitude.

· Ability to work independently, be hands-on and expected to dive into technical details as required.

Education (Minimum Level)

· Bachelor's

Field of Study

· Degree in Engineering (Electrical/Electronics, Material Sciences, Mechanical, Chemistry or equivalent)

Years of Experience (Minimum)

· 1 - 3 years

Lumileds is an Equal Employment Opportunity Employer

The candidate will be responsible for the management and maintenance of M&E facilities in a Grade A commercial building. You will oversee functions and activities of day-to-day M&E systems and suggest improvement maintenance plans, you will also be involved in developing, implementing, reviewing and maintaining the maintenance regime and process review. In addition, you are required to oversee the works carried out by the contractors and ensure minimal disruption to the building operation.

Roles and Responsibilities:

• Support in the facilities management services, which include M&E support of the building
• Assist in the supervision of contractors in planning, coordination and execution of corrective, preventive maintenance, integrated system tests and annual building shutdown activities
• Assist in the preparation of regular reports for internal and external customers
• Assist in cost management and price negotiation with the vendors
• Support in other Ad-hoc project

Requirements:

• Diploma in Mechanical/Electrical or Facilities Management or its equivalent
• Certified Senior Fire Safety Manager will be considered a priority
• Relevant experience in Facility Building Maintenance services, ACMV equipment/chillers
• Knowledge in BMS or M&E infrastructure will be an advantage
• Excellent interpersonal and communication skills
• Fresh graduates are welcome to apply
• Shift work required (3 rotating shifts: Morning, Afternoon and Night)
• Only Singaporeans may apply

Job Description / Responsibilities

• Undertake detailed design of buildings and civil infrastructures
• Execute of civil and structural design involving the preparation of calculations and review of structural design drawings in accordance to client's requirement
• Work with Qualified Person (QP) to develop design scheme for civil and structural works
• Coordinate with Authorities, Clients and Contractor

Job Requirements

• Candidates must possess at least degree in Civil Engineering (preferably recognised by PE Board)
• Conversant with latest design codes (Eurocode)
• Knowledge on various design software like SAP2000, Midas Civil, Adsec, SAFE, etc will be an advantage
• With good attitude towards work and timeline
• Good knowledge of structural analysis
• Familiarize the steel work design/detailing or the RC design/detailing
• Capable of resolving site issues
• Good command of written and spoken English
• Knowledge in BIM/drafting software will be an advantage