Job Description:

1. Responsible and accountable for safe and efficient operation of new generation very large LNG carriers.

2. Compliance with company policies, procedures and international shipping regulatory requirements.

3. Management of vessels Certification, documentation and surveys.

4. Preparing and managing vessels operational, capex and docking budgets.

5. Inspection of vessels including sailing on board for visits.

6. Preparation for docking of very large LNG carriers, managing the entire docking process, including cost control and budget.

7. Able to troubleshoot and support ship staff with onboard technical issues remotely.

8. Communicating with the shipowners, meeting demand of owner specific reporting as well as that of 3rd parties.

9. Vetting store and spare requisitions raised by vessel to ensure optimum maintenance, vessel availability whilst ensuring budget maintenance.

10. Arrange vetting or charterer/owner inspections and retain responsibility for ensuring vessels’ acceptance.

11. Accountable for maintaining operational KPIs set by the senior management. To ascertain reason for not meeting environment KPI for management review.

12. Analyze SIRE observations and ensure correct response is uploaded in SIRE.

13. Ensure that all TMSA requirements and other company-specific special requirements & instructions for the safe operation of tankers are implemented on board and followed diligently by the office staff as well as by the vessels under management. Work closely with MO to carry out this function.

14. Structural review response to external parties.

15. Any other task assigned by the Company.

Job Requirements:

1. At least 1 year of experience as Chief Engineer on ocean-going Very Large Liquefied Petroleum and/or Natural Gas Carriers (steam turbine/motor/X-DF engine) with reliquefication plant or equivalent qualification and experience from maritime industry.

2. Have a good command over spoken and written English.

3. Able to respond to communication from owners/ship/3rd parties without delay including after office hours when required.

4. Have a very good understanding of the demands of seafarers and their working environment.

5. Capable of supervising staff at sea.

6. Candidate should have good practical knowledge of vessel operation and maintenance, both short and long term.

7. Adequate ability and attitude to work in a multi cultured organization.

8. Possesses basic computer application and communication skills.

9. Have adequate understanding of various International Maritime regulatory requirements of shipping industry and Safety Management Systems as per ISM Code.

10. Good understanding of new regulations.

11. Good Understanding of decarbonization and future fuels.

12. Good Knowledge of Dual-fueled LNG.

PT Trakindo Utama Singapore Branch is expanding! The Power Systems department is looking for two exceptional project engineers to bolster the department's capabilities! Aspiring applicants can look forward to a dynamic career, engaging stakeholders on all aspects of their electrical needs, and to exercise their creativity and robustness in delivering solutions and customizations!

We invite aspiring applicants to join our team, and experience the prestigious legacy of our Company, let's advance together!

Primary Objective of Position

• Responsible for all electrical aspects and management of projects, including tendering, design, drawing, scheduling, purchasing, testing, packing, shipment and commissioning of power generation sets on site.

Duties & Responsibilities

• Coordinate all electrical interfacing of designated projects to meet specifications
• Instruct draughtsperson to prepare electrical drawings for tender replies and awarded projects according to customers' specifications
• Review returned drawings and modify as required for construction
• Coordinate with contractors on genset build up
• Provide specifications for control panels, generators and switchgears to vendors
• Liaise with vendors for quotations to procure/fabricate
• Coordinate with Parts Dept on order for CAT parts
• Assist with final technical inspections and testing of equipment
• Prepare packing list and coordinate with HPL on packing, delivery and shipment
• Perform on site commissioning as and when required
• Prepare project costing and report to the Project Manager
• Attend/Conduct engineering and project meetings both in Singapore and overseas (when required)
• Perform calibration of electrical items
• Assist in review and update of department procedures and manuals
• Fulfill other adhoc duties as assigned by Management

Person Specifications

• Possess a degree in Electrical/Power Engineering or 2 years of related experience in Power Generation Engineering and/or Project Management
• Proficient in Microsoft Office applications
• Knowledge in electrical aspects of power systems and control panels

Salary: $4000 to $6000 per month

26 working days (8-5 pm)

overtime may be necessary for urgent projects

Good prospects

Roles & Responsibilities:

- To supervise and lead a a team for maintenance and overhaul all mechanical, hydraulic jobs onboard

vessels and onshore shipyard repairs

-To inspect, and report repair plans and schedules for meetings with ships manager and related

teams

-To dismantle and co-ordinate all spare parts for indents or repairs

-To monitor and report work progress during the repairs process

-To assembly and upon completion for sea trials before hand over of repairs to ships manager

Educational & experiences:

-diploma or bachelor's degree in engineering

-5 years practical experiences in marine fields

-Able to communicate with all stakeholders and work teams

Pratt & Whitney is a world leader in the design, manufacture and service of aircraft engines, and auxiliary power units. It offers a broad product portfolio that includes commercial aircraft jet engines, commercial turboprop engines, military aircraft engines, business and general aviation jet and turboprop engines, helicopter turboshaft engines.

Pratt & Whitney in Singapore is a global center of excellence with the most comprehensive service offering outside of the U.S. Located in key industrial areas of Loyang, Seletar and Tuas, the Pratt & Whitney companies operating in Singapore include: Component Aerospace Singapore, Eagle Services Asia, P&W NGPF Manufacturing Company Singapore, Pratt & Whitney Canada (SEA), Pratt & Whitney Component Solutions, and Turbine Overhaul Services. Pratt & Whitney has been operating in Singapore for more than 30 years, making it one of the pioneers in the development of Singapore’s world-class aerospace industry. Learn more at prattwhitney.com

Entity: Turbine Overhaul Services Pte Ltd

Location: 5 Tuas Drive 2, Singapore 638639

Responsibilities:

• Digital specialist for the site, aid in business level architecture and roadmaps, spearheading the overall design and implementation of digital transformation initiatives on an organizational level.
• Aid digital transformation strategy toward full-site Digital Factory (Industry 4.0) implementation.
• Lead changes on Digital Factory with digital tools adoption, using data to drive business goals.
• Working with internal and external stakeholders to deliver agile solution strategies and fit-for-purpose digital visualization solutions to improve operational efficiency.
• Work closely with all levels of management, personnel (including global SMEs) and Digital Transformation Team (APAC) to align and implement read-across projects.
• Maintaining an inventory of current technology offerings and evaluating emerging technology solutions to determine which solutions may be most beneficial to the organization’s long-term goals
• Managing project budget, delivery, and SLAs (service level agreement) to develop POC and production ready solutions.
• Creating a culture of innovation within the organization by encouraging employees to think outside the box and embrace new technologies.
• Drive and aid in CORE (Customer Oriented Results & Excellence) projects to achieve business and enterprise objectives.

Requirements:

• Bachelor’s degree in Engineering, Computer Science, IT, or relevant technically related field.
• A minimum of 5 years of relevant experience in engineering, manufacturing, operations, continuous improvement, finance, or business development.
• Proven experience in developing strategies and setting up and executing transformation initiatives (examples: digital transformation, IT Transformation, end to end workflow automation and operations)
• Technical Skills to facilitate process redesign, data, infrastructure, and system management.
• Demonstrated the ability to understand complex systems and environments to make best recommendations.
• Project management experience and driving change management.
• Strong influencing skills, business discernment to anticipate what’s next, and ability to innovate.
• Strong written & verbal communication skills and demonstrated industry insight.
• ACE/CORE Accreditation and or knowledge of LEAN Six Sigma tools preferred.
• Technical knowledge of Pratt & Whitney’s Engines Repair, PW Repair Centers, and PW Engine Services business is a plus.
• Knowledge of cybersecurity and M365 is a plus.

Why Join Us:

• We drive innovation to go beyond with a purpose to transform aviation.
• We grow our people to become leaders with talent & leadership programs.
• We offer employee scholarship program for further education.
• We care for your well-being with comprehensive health, medical & dental benefits.
• We provide island-wide company transport from major MRT stations.
• We equip your skills & knowledge with on-the-job trainings and in-house/ external certifications.
• We value trust, safety, integrity, respect, safety, innovation and excellence.
• We provide annual wage supplement (AWS) and variable bonus plan.
• We provide shift & meal allowances (Shift work only).
• We provide overtime benefits as applicable (Shift work only).
• Our ethos is “We Succeed, Together”!

Pratt & Whitney is a world leader in the design, manufacture and service of aircraft engines, and auxiliary power units. It offers a broad product portfolio that includes commercial aircraft jet engines, commercial turboprop engines, military aircraft engines, business and general aviation jet and turboprop engines, helicopter turboshaft engines.

Pratt & Whitney in Singapore is a global center of excellence with the most comprehensive service offering outside of the U.S. Located in key industrial areas of Loyang, Seletar and Tuas, the Pratt & Whitney companies operating in Singapore include: Component Aerospace Singapore, Eagle Services Asia, P&W NGPF Manufacturing Company Singapore, Pratt & Whitney Canada (SEA), Pratt & Whitney Component Solutions, and Turbine Overhaul Services. Pratt & Whitney has been operating in Singapore for more than 30 years, making it one of the pioneers in the development of Singapore’s world-class aerospace industry. Learn more at prattwhitney.com

Entity: Turbine Overhaul Servies Pte Ltd

Location: 5 Tuas Drive 2, Singapore 638639

Responsibilities:

• Implement flow down of Approved Technical Data in compliance of P&W Repair Process Standard Work (RPSW).
• Integrate different elements of RPSW and lead discussion with Pratt on changes/ improvement to RPSW for processes owned
• Drive and implement the cost reduction projects initiatives, assist in developing products and new repair methods.
• Subject Matter Expert (SME) and technically coach/ mentor/ lead group of engineer(s) in processes owned
• Develop, review, improve and implement Work Instructions (Standard Work).
• Aid operation cells on timely technical resolution.
• Lead productivity and CORE (Customer Oriented Results & Excellence) projects to reduce cost, improve quality and cycle time.
• Lead method optimizations, equipment refreshment and technology improvement projects
• Support quality escape incident and customer warranty investigation (perform RRCA, DAISE).
• Support operation cells in mitigating EHS risks and identify improvement projects.
• Implement Process Control and Certification (ProCert) of products and maintaining currency.
• Support cost reduction, process efficiency and material usage reduction initiatives.
• Perform responsibilities in compliance with EH&S Policy, RTX Code of Conduct and Global Trade Compliance at all times.

Requirements:

• Degree in Engineering (Material Science Engineering is preferred) or equivalent.
• Knowledge various repair processes like plasma spray, diffusion coating and brazing is preferred.
• Knowledge in aero component repair processes will be an added advantage.
• Good problem-solving, analytical, prioritization and multi-tasking skills.
• Team player with good communication and social skills.
• Good working knowledge of MS Office software (Word, Excel, Access and PowerPoint).

Why Join Us:

• We drive innovation to go beyond with a purpose to transform aviation.
• We grow our people to become leaders with talent & leadership programs.
• We offer employee scholarship program for further education.
• We care for your well-being with comprehensive health, medical & dental benefits.
• We provide island-wide company transport from major MRT stations.
• We equip your skills & knowledge with on-the-job trainings and in-house/ external certifications.
• We value trust, safety, integrity, respect, safety, innovation and excellence.
• We provide annual wage supplement (AWS) and variable bonus plan.
• We provide shift & meal allowances (Shift work only).
• We provide overtime benefits as applicable (Shift work only).
• Our ethos is “We Succeed, Together”!

Site Reliability Engineers (SREs) are responsible for keeping all cloud platform services and other cloud solutions running smoothly. You will be a key contributor on a dynamic team, expand your skillset and become an expert in the most popular cloud software development strategies for dormakaba. We are looking for an independent, self-motivated, and innovative professional to implement industry best practices in a true cloud.

• Leading and contributing to designs for issues, epics, and Objectives & Key Results (OKR)
• Contributing to the Handbooks, create and update runbooks and general documentation, and write blog posts
• Completing Root Cause Analysis (RCA) investigations and lead post-mortem discussions

Qualifications & Requirements

• Bachelor’s degree in Computer Science, Engineering
• Minimum of 3 years experience in a similar position
• Thorough understanding of a cloud CI/CD release process using Jenkins and IAC using Terraform
• Working Knowledge of AWS serverless technologies, services, or infrastructure architecture
• Ability to perform cloud resources provisioning and configuration through CLI/API
• Experience with monitoring and instrumentation: implement metrics using tools like Prometheus, Grafana, Datadog, Kibana and related system
• Experience with Docker container related technologies like Kubernetes, EKS, ECS and Fargate
• Working experience in a variety of languages: Shell, Python, Node.js and others
• Part of the Cloud Operation on an on-call rotation to respond to service impacting incidents

Responsibilities

• Translate requirements and user wish lists into development components design documents in line with products and solution roadmaps
• Translate design documents into actual code and solution developments that have good functionality and of high quality
• Respond to changes in initial requirements and work in an agile manner to deliver iterative features
• Ensure that codes developed are tested, maintained and documented

Requirements

• Bachelors or Master in Engineering (Computer/Telecommunication), Computer Science / Information Technology or equivalent
• Proven experience as a Full Stack Developer or similar role
• Strong proficiency with JavaScript
• In depth knowledge of Node.js
• Familiarity with microservices , serverless architectures
• Knowledge of multiple back-end languages (e.g. C#, Java, Python) and JavaScript frameworks (e.g. Angular, React)
• Proficient understanding of code versioning tools, such as Git
• Strong knowledge and experience in AWS cloud development, including but not limited to Lambda, API Gateway, IoT, Cognito, DynamoDB
• Knowledge of Linux, shell scripting
• Familiarity with relational and non-relational database technologies like MySQL, MongoDB, etc.
• Excellent communication and teamwork skills
• Great attention to detail
• Organizational skills
• An analytical mind

Job Responsibilities :

• Liaise with client and develop design concepts and basis of design to set direction of design.
• Check engineering deliverables and assure technical integrity of design.
• Ensure all engineering works comply with all relevant Statutory standards, Regulations and Codes of Practices.
• Carry out various types of geotechnical design and analysis – deep excavations, shafts, tunnels, slopes, foundations, etc.
• Carry out appropriate design of structural nature where required.
• Performs other duties or projects as assigned.

Job Requirements:

• Minimum eight (8) years of geotechnical engineering experience with Degree in Civil Engineering recognised by the PE Board or qualification acceptable to the Commissioner of Building Control and eligible for application as a Resident Engineer
• Recognised Degree in the relevant field subject to the acceptance of the Engineer
• At least five (5) years of experience in construction supervision of geotechnical work for projects of similar scale, complexity and nature of work.
• Experience with LTA projects would be advantageous.
• Ability to thoroughly analyze and research information.
• Excellence written and verbal communication skills

Salary: Basic $3,500 - $4,500 + VB

Time: Monday - Friday (8.30am - 5.30pm)

Location: Tuas Avenue

Responsibilities:

• Formulates project objectives through a comprehensive examination of tender requirements and specifications.
• Identifies project phases and tasks, assigns team members accordingly, and obtains quotations from suppliers to fulfill project responsibilities.
• Examines product design, customer requirements, and performance standards to determine project specifications.
• Develops the project schedule by analyzing the project plan and specifications, calculating time requirements, and sequencing project elements.
• Monitors project progress, coordinates activities, and resolves issues to ensure the project schedule is maintained.
• Oversees the project plan, reviewing design, specifications, and any changes to the plan and schedule.
• Manages project budget expenditure by controlling costs and expenses.
• Prepares detailed project status reports by collecting, analyzing, and summarizing information and trends.

Requirements:

• Possess Class 3 driving license.
• Diploma or Degree in Engineering.
• 3 - 5 years’ experience in managing projects in Commercial Vehicle / Automotive industry.
• Able to apply Project Management tools and methodology.
• Proficient knowledge in AutoCAD software & Microsoft Office.

Please submit your updated resume by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

We regret to inform you that only shortlisted candidates would be notified.

We wish you all the best in your career search.

You are welcome to visit our website at http://www.rkgroup.sg/

RK Recruitment Pte Ltd | EA License No.: 20C0280

Lon Kei Hin | EA Personnel No.: R23116368

Description

Under general supervision, manages multiple internal projects involving a single discipline or department.

Drives various components of project planning and execution on multiple projects such as completion of multiple detailed project specifications.

Leads project activities across functional groups. Ensures that project deliverables are properly completed and directly impacts cost containment, efficiency or profitability of operations.

Provides guidance and mentoring to more junior team members.

Requirement

Requires completion of an undergraduate degree in Science, Technology, Engineering and Math (STEM), and 4 years of related experience.

What a Laserjet Enterprise Solution (LES) Planning Engineer does at HP:

• Act as Consultant/Subject Matter Expert in the domains of planning and production to the broader HP and Mpa audience.
• Leads solution design for mid- and long-term planning and production challenges based on deep business understanding.
• Leads planning and production Plan of Record, drives implementation according to plan.
• Leads communication regarding E2E planning and production performance during market share and quarter end.
• Leads planning and production business process documentation and BRD maintenance.
• Accountability for managing the optimal performance scoring considering responsiveness, predictability and cost.
• Translate mutually agreed planning and production strategies into tactical and operational actions.
• Present choice points for planning and production business challenges; short-, mid- and long-term
• Reduce MPa dependency on HP guidance.
• Coordinates multiple projects within a large scale program involving one or more functions driving the engineering development and implementation process for products or service offerings.
• Develops portions of support requirements for assigned project, including budgets, and resource allocation plans, in accordance with provided plan and specifications.
• Coordinates the activities of associated project teams; tracks progress against established plans, reports results, and makes recommendations for alterations or updates to program manager.
• Develops program communications, including creation of status reports and summaries, tracking escalations and resolutions of issues, coordinating stakeholder meetings and updates, and updating project and program plans.
• Leads resources across multiple projects.

Individuals who do well in this role at HP, usually possess:

• Bachelor's or Master's degree in Business Management, Engineering, Computer Sciences, or equivalent.
• Typically 2-4 years experience.
• Solid operational planning and factory background.
• Solid understanding of various planning and production methods.
• Excellent English communication skills.
• Demonstrated ability to work in a multicultural environment.
• Demonstrated understanding about the HP Print business and its priorities.
• Demonstrated presentation skills.
• Demonstrated project and process management t skills.
• Using project planning tools and software packages to create, manage, and track project results.
• Ability to apply analytical and problem solving skills.
• Understanding of organization and company product and service offering development process.
• Knowledge of project and program methodology, resource allocation plans, budgets, and requirements.
• Ability to effectively communicate manufacturing plans, proposals, and results, and negotiate options.

Sustainable impact is HP’s commitment to create positive, lasting change for the planet, its people, and our communities. This serves as a guiding principle for delivering on our corporate vision – to create technology that makes life better for everyone, everywhere.

HP is a Human Capital Partner – we commit to human capital development and adopting progressive workplace practices in Singapore.

• Supervise and oversee the sequencial activities of Structural, Piping & Mechanical Equipment (SMP) Installation such as Receiving, Locating in the lay down, Preservation,Foundation and Structure, Receiving from Main Contractor/Suppliers/Vendors,Pipe Support Installation, Launching, Fitting and Welding of piping, Flange Alignment, Punch Clearing, Reinstatement,Touch up Painting and Hand Over.
• Must have working knowledge of all applicable piping and structure standards and recommended practices, e.g. BS, ASME,ASTM,CSA,API etc.
• Managing project scope and change control with commerical or without commercial impact.
• Development of procedures, flowchart or process flow, detailed calculation based on available Engineering information.
• To procure and requisition materials based on interpret construction and technical drawings.
• Communicate with Engineering/technical/quality requirement to team individuals.
• Project Coordinate with Clients, PMD, Procurement, Engineering, Contract & Finance Departments & Subcontractors and interfaces with other REL' s Business Units.
• Working closely with main contractor and client to ensure the project meets the required needs.
• Resolve any unexpected technical difficulties for SMP scope and other problems that may arise at any time.
• Oversee the Steel Structural Works, Piping and Mechanical while assist and communicate for any prioritize from Pre-Fabrication required (e.g PTREI and Subcontractors)
• Preparation of method of statement, risk assessments for Piping, Mechanical & Steel Structure Scopes.
• Monitoring and installation supervision with Subordinates to deliver the projects in Safety, Quality and Production manners.
• To liaise with clients representative on all project issues and subcontractors to ensure safe and efficient delivery of projects to both the company and clients satisfaction.
• Leading the supervisors and foremen in finding and executing solutions to SMP related problems on site
• Communicating with Project Management Team/QAQC Team to validate and document all changes and highlight to PM for changes that shall involve additional works
• Assist with the management of internal and external third party interfaces.

An engineering company is looking for Mechanical Engineer/ Processing Engineer

Job description

• to perform design and project management
• - supervision of site installation
• - co-ordination with customer and contractor

Requirement

• - Diploma / Degree in mechanical or chemical engineering
• - 3 years of working experience in process and equipment design calculation, equipment selection, and layout
• - Good knowledge of piping, pressure vessel, and tank design

Assembly Engineer

The Assembly Engineer plays an important role in the manufacturing and assembly process. He / She will be in charge of designing and optimizing the work process to ensure requirements, manufacturing standards and safety aspects are met.

Job Description:

· Working in Mechanical and Electrical assembly environment

· Create CAD drawings based on requirements

· Generate and implement operating procedures and work instructions

· Participate in technical discussions to facilitate process implementation

· Design, optimize and ensure processes meet requirements for standards, safety and datelines.

· Provide technical and engineering skills to resolve operational issues

Requirements:

• Higher Nitec/ Diploma / Degree in Mechanical or Electrical/Electronics engineering with relevant experience
• Good skill in CAD
• Good attitude towards acquiring new knowledge
• Able to work under pressure and tight datelines
• Self-motivated and able to work independently
• Good communication and interpersonal skills

• Ensure to know project scope of works and meet the clients needs as per project standard and requirements.
• Supervise and oversee the sequencial activities of Structural, Piping & Mechanical Equipment (SMP) Installation such as Receiving, Locating in the lay down, Preservation,Foundation and Structure, Receiving from Main Contractor/Suppliers/Vendors,Pipe Support Installation, Launching, Fitting and Welding of piping, Flange Alignment, Punch Clearing, Reinstatement,Touch up Painting and Hand Over.
• Must have working knowledge of all applicable piping and structure standards and recommended practices, e.g. BS, ASME,ASTM,CSA,API etc.
• Managing project scope and change control with commerical or without commercial impact.
• Development of procedures,flowchart or process flow, detailed calculation based on available Engineering information.
• To procure and requisition materials based on interpret construction and technical drawings.
• Communicate with Engineering/technical/quality requirement to team individuals.
• Project Coordinate with Clients, PMD, Procurement, Engineering, Contract & Finance Departments & Subcontractors and interfaces with other REL's Business Units.
• Working closely with main contractor and client to ensure the project meets the required needs.
• Resolve any unexpected technical difficulties for SMP scope and other problems that may arise at any time.
• Oversee the Steel Structural Works, Piping and Mechanical while assist and communicate for any prioritize from Pre-Fabrication required (e.g PTREI and Subcontractors)
• Preparation of method of statement, risk assessments for Piping, Mechanical & Steel Structure Scopes.
• Monitoring and installation supervision with Subordinates to deliver the projects in Safety, Quality and Production manners.
• To liaise with clients representative on all project issues and subcontractors to ensure safe and efficient delivery of projects to both the company and clients satisfaction.

ROLES AND RESPONSIBILITIES

• Daily Update of Project/Operation Progress to immediate superior.
• To have and maintain good daily attendance and punctuality.
• To update team member at least 2 working days in advance before going for leave , in order to minimize downtime
• Supervise and oversee the work of Electricians and Instrument Techs, responsible for training and testing, responsible for maintenance of and compliance with electrical safety program, including LOTO System.
• Must have working knowledge of all applicable electrical industry standards and recommended practices, e.g. NEC, IEEE, ANSI, ISA, NEMA, CP5 etc.
• Must have the knowledge and experience of instrumentation used to control and monitor processes in the chemical processing/Oil & Gas industry
• Must have hands on knowledge and experience with various types of instrument and electrical systems, equipment and software.
• Experience and ability to manage electrical and instrumentation engineering projects with knowledge of how to establish estimates for VO/Change Order works
• Managing, allocating resources and ensuring completion of E&I work orders
• Leading the electricians and instrument techs in finding and executing solutions to E&I problems on site
• Planning and organization of some non-capital E&I project work, including plant shutdowns/ TAR works
• Able to have understanding the control system architecture and software sufficient to find and modify elements.
• Communicating with Project Engineer/QC engineer to validate and document all changes and highlight to PM for changes that shall involve additional works
• Nominating and training Instrument/Electrical Techs capable of doing works well
• Assist to set out detailed works as per the contract drawings, ensuring checks are carried out on a regular basis
• Ensure that records are accurate and comply with organisational and legal requirements as well as project requirements
• Resolve any unexpected technical difficulties and other problems that may arise at any tim
• Produce procurement schedules for the jobs and liaise with the procurement department to ensure site have adequate resources to complete the tasks
• Produce ITP’s with QC Engineer and Task Briefings
• Produce 2 week look ahead in conjunction with the Site Agent
• Comply with company procedures and legal obligations
• Promote and comply with environmental compliance
• Deliver the works safely and to deadline
• Promote best practice for Safety, Quality and Productivity
• Ensure work is delivered defect/snag free
• Endeavour to spot and highlight value engineering opportunities and innovaive ideas and closely working with CM
• Coordinate with client and other Contractors for the project interface activities.
• Managing project scope and change control with commerical or without commercial impact.
• Monitor and ensure supervisor plan and instruct and monitor in DWI .
• Update and report daily progress status and lookahead minimum 3days plan with Supervisor.
• To Accurate and timely setting out of the works
• Timely handover of works and Quality records without outstanding defects
• Production of accurate records, drawing registers and weekly Reports
• Must have good relationship with Site team & client technical representative .

TRAINING

• To understand on SAP transaction: Invoicing Plan, GR, Budget, Actual Manhours, MRMS, Costing
• Tender Process
• To know and understand REI core business
• Project PI
• To achieve 72 training hours per year

Safety

• Ensure Workplace in Safe and Healthy Environment
• Safe and efficient receiving,storage,issuing of goods
• Ensure No Slips, Trips and Falls environment
• Use correct lifting postures and techniques to prevent injuries

Responsibilities

• To have and maintain good daily attendance and punctuality
• To update team member at least 2 working days in advance before going for leave, in order to minimize downtime

Daily Task

• Daily Update of Project Progress to immediate superior
• Weekly report progress

Main Task

• Design and Update Electrical & Instrument system layouts, single line diagrams, control schematics equipment/material schedules and date sheets, control wiring diagram for control systems etc
• Drafts engineering documents for clients submission or for construction
• Tender proposal, drawing of Heat Tracing System
• Coordinates and cooperates with other disciplines on new process requirements, design interference check and design changes
• Adheres to ISO quality requirements in the execution of works
• Adheres to drawing checking procedure
• Performs electrical calculations on cable sizing, lighting illumination level, cable ladder/tray sizing etc
• Production planning and co-ordination of production activities to meet deadlines
• Do the QC on Electrical related items
• Prepare Engineering change form when there are changes in design
• Attend meeting with Sales personnel to Client office or Site
• Not authorize to sign any company documents during probation period
• Other Ad-Hoc duties assigned from time to time

• Daily Update of Project/Operation Progress to immediate superior
• To have and maintain good daily attendance and punctuality
• To update team member at least 2 working days in advance before going for leave, in order to minimize downtime
• Attend complete orientation, introduction of superior, JSJD, clear scope of work and necessary drawing or documents on First day of work on site
• Coordinate with client and other Contractors for the project interface activities
• Liaise with site HSE personnel to ensure corporate policies, practices and procedure one met
• Managing project deliverables in line with the project plan
• Managing project scope and change control with commercial or without commercial impact
• Monitor and ensure supervisor plan and instruct and monitor in DWI
• *Monitoring project progress and performance
• Plan monthly works schedule and set productivity to be achieved
• Prepare MSRA
• Prepare Tender Review Checklist Part 1, 2 & 3, ATQ & Notice of Tender Inquiry & Tender submission
• Prepare Vendor/Sub-Contractor Pre-qualification document & check list
• Prepare and update MRMS
• Project Planning, Progress Reports and Claims
• Proposed training for worker on live cable handling
• Providing status reports to the management
• Request and plan min Two days in advance for full PPE (if applicable), schedule of SIC, site location and contact Personal on the first day of work
• Responsible & accountable to ensure compliance with company, regulatory and client's policies and procedures. Ensure local regulations policies and procedures are incorporated into the business unit plan
• Review and monitor construction activity schedule including the analysis of costs, progress and other productivity data
• To fulfill and achieve higher weekly and daily target
• To monitor the progress of projects against planned
• To plan, monitor and ensure manpower, materials, equipment and tools are ready for day to day work activities
• To take on additional appointments from time to time assigned by the company's authorized officer, and carry out the duties of such appointment duly and diligently to enhance the company image and to improve the company's business opportunities
• To verify technical specifications for adequacy
• Update and report daily progress status and look ahead minimum 3days plan
• Working closely with main contractor and client to ensure the project meets the required needs
• Supervising the project at all stages and providing solutions to problems
• Collaborating with site managers, surveyors, engineers, site worker and other professionals

Position Overview:

We are seeking a skilled IT Executive to play a key role in IT automated storage and retrieval machine projects, customer warehouse integration, and providing advanced support

In this role, you will contribute to project execution, deliver exceptional customer support, and ensure smooth Your technical expertise and customer-centric approach will be integral to our success.

Responsibilities:

IT Projects Implementation:

• Assist in software project implementation of warehouse automated storage and retrieval machine for customer, including supporting integration to customer ERP system, IT infrastructure and customers networks.

• Collaborate in setting up the machine, configuring software,

• Performing UAT/SIT,Software user Training for customer and internal staff, Software Go live support

• Document IT projects comprehensively, outlining processes, configurations, and outcomes.

• Conduct IT site visits to assess requirements, troubleshoot issues, and gather insights for improvement.

IT Service support:

• Provide remote helpdesk and onsite support services for customers, addressing their technical needs promptly and professionally.

• Be stationed onsite on scheduled days to offer hands-on IT software support and ensure customer satisfaction.

• Prepare detailed IT service reports for accurate tracking and analysis.

IT Tasks and Ad-hoc Duties:

• Undertake various IT-related tasks as required to support onsite customers effectively.

• Respond to IT ad-hoc duties assigned by the Supervisor, demonstrating adaptability and versatility.

Qualifications & Requirements:

• Minimum of a Diploma or higher in Computer Science, Information Technology, or equivalent field.

• Available to travel for support customer in Singapore & Malaysia

• A minimum of 3 years of hands-on experience in a similar position.

• Mandatory experience in software application support, with exposure to systems like inventory, warehouse management, ERP.

• Familiarity with basic IT infrastructure, server setup, and network troubleshooting.

• Effective communication skills to liaise with team members, customers, and vendors.

• Proficiency in escalating technical and customer inquiries clearly to technical teams and superiors.

Responsibilities:

Database Administration

• Act as the Subject Matter Expert for database-related services.
• Manage the daily BAU operation of database-related services.
• Carry out service monitoring, end-to-end performance correlation, and database performance optimization. Create, review and update system documentation and work instructions to enhance the efficiency of daily operations.
• Perform capacity planning to size database resources to meet the demands of application workloads.
• Plan, execute, and monitor backup schedules in accordance with business needs and data retention policies.
• Review database security, perform database hardening, and apply regular or ad-hoc security patches to ensure compliance with IT security policy.
• Coordinate/Support with application support teams to schedule database updates and upgrade databases with minimal business impact.
• Provide Level 2 support for database service-related queries.
• Perform incident escalation in accordance to escalation procedures.
• Coordinate with other functional teams in incident handling, and ensure incidents are resolved or work- around within stipulated SLAs.
• Contribute to or drive root-cause analysis.
• Ensure that all internal processes and procedures are up to date and in accordance with the company's directives.

Data Services Provisioning

• Perform requirement gathering with application support teams.
• Recommend appropriate data services and system capacity according to agreed requirements.
• Develop configuration policies to optimize security, performance, and availability.
• Set up data services according to policies and guidelines.
• Set up data pipelines for data analytics and dashboard initiatives.
• Coordinate with other functional teams to complete the work required to operationalize data services such as IP address assignment, DNS requests, firewall port opening and security scan, database onboarding, data pipeline creation, database monitoring, and database performance monitoring.
• Ongoing review and improvement of process flow, system, and processes through automation, innovation, as well as the adoption of new technologies.

Implementation of IT Initiatives and Solutions

• Provide feedback on the design of data services for new systems.
• Support execution of database services initiatives and business projects.

Requirements:

• A recognized diploma or degree in IT or related fields.
• Minimal 5 years of hands-on experience in systems and database administration in an enterprise or campus environment.
• Hand-on experience in administering MSSQL, Oracle database (10g and above), Oracle high availability technologies such as RAC and Data Guard, database performance tuning and troubleshooting, and database upgrades and migrations tools.
• Hand-on experience in data cleansing, data transformation, and data quality management.
• Hand-on experience in developing dashboards using data visualization tools e.g., Qlik Sense, Power BI and etc.
• Knowledge of MariaDB, MySQL, and PostgreSQL.
• Experience in Windows, and Linux variants, preferably Red Hat and Ubuntu.
• Experience in capacity planning, availability management and business continuity management.
• Experience in project management.
• Independent, highly motivated and a proactive team player who can work with minimal supervision.
• Excellent in written and verbal communication.

The following certifications while not necessary, will be an added advantage:

• Database Administrator Certified Professional for MSSQL/Oracle/MySQL
• ITIL Foundation Level
• Certified Professional in Data Analytics/Data Visualization/Data Virtualization/Machine Learning
• AWS/Azure Certifications

Job Responsibilities

• Manage and implement document control activities
• Audit and assure that manufacturing processes are capable of producing products that conforms to established requirements
• Manage non-conformance issues and implement actions to prevent recurrence
• Follow up on corrective actions to ensure quality issues are addressed and resolved
• Responsible for customers’ quality audits and inspections
• Prepare QA reports
• Ensure products meets customers’ requirements
• Conduct internal audits and enforce ISO Quality Management system within the organization

Requirements:

• Diploma / Degree in Quality Assurance, Mechanical, Electrical/Electronics engineering or equivalent with relevant experience
• Knowledge in ISO 9001, CP/CPK, SPC and 8D reporting will be advantageous
• Good attitude towards acquiring new knowledge
• Able to work under pressure and tight datelines
• Self-motivated and able to work independently
• Good communication and interpersonal skills

Primary Function:

• Strategize on maintenance, work instruction and methods to create plant equipment preventive maintenance procedures.
• Support in the planning of routine maintenance of production equipment.
• Analyze breakdowns, diagnose faults, and lead time critical equipment repairs. Implement preventive measures to improve machine reliability.
• Work with reliability engineers to improve equipment performance and extend equipment useful life cycle.
• Oversee and control maintenance costs. Manage budget for equipment upgrades and replacements.
• Train and mentor junior engineers and technicians in equipment operating concepts and maintenance techniques.
• Function as project development member to install or upgrade equipment. Schedule and obtain project material and manpower.
• Support Plant EHS and quality initiatives and targets.
• Responsible for developing budgets and long-range plans based on company growth and future maintenance needs.

Responsibilities:

• Responsible for the maintenance (corrective, preventive, predictive) of plant equipment, wet process and dryer, dry blending and packaging, Clean In Place systems, warehouse in comply with the Site Safety and GMP procedures to ensure good uptime and good MTBF.
• Responsible for support the equipment qualification and validation, such as walkdown, punch list commissioning, IQ/ OQ/ PQ for any new project.
• Responsible for execution of work order and record job performed via MAXIMO system.
• Responsible for writing Job Aids and Maintenance SOP writing, CCA and ER investigation.
• Manage and lead contractor, vendors and service providers to perform maintenance or project works.
• Responsible for Maintenance budge for area of responsibilities
• Lead and Take part in continuous improvement efforts/ projects.
• May act as delegate to the Engineering Manager when required.
• Any other duties as assigned by supervisor.

Requirements:

• Bachelor of Engineering in Mechanical, Mechatronic, Aerospace/aeronautical or related discipline
• Min 5 - 7 years of relevant experience, preferably in manufacturing plant
• Prior experience with packaging processes ideal
• Good communication and interpersonal skills
• Good team player and able to multi-tasks
• Able to react effectively to dynamic Manufacturing environment and able to work independently

*Kindly note this position is based in Tuas.

• Develops project objectives by reviewing tender requirements and specifications.
• Determines project responsibilities by identifying project phases and tasks; assigning team members to project tasks; sourcing quotations from suppliers.
• Determines project specifications by studying product design, customer requirements, and performance standards; completing technical studies; preparing cost estimates.
• Determines project schedule by studying project plan and specifications; calculating time requirements; sequencing project elements.
• Maintains project schedule by monitoring project progress; coordinating activities; resolving problems.
• Controls project plan by reviewing design, specifications, and plan and schedule changes.
• Maintains project budget expenditure by controlling costs and expenses.
• Prepares project status reports by collecting, analysing, and summarising information and trends.

Requirements

• Class 3 driving license
• Diploma or Degree (Engineering)
• 3- 5 years’ experience in managing projects in Commercial Vehicle / Automotive industry
• Able to apply Project Management tools and methodology
• Proficient knowledge in Auto CAD software, Microsoft Office

Job Description

We are looking for an Application Engineer who enjoys interacting with customers and likes to work in an autonomous environment. In this position, you will manage and develop long standing client relationships, with an intense focus on exceeding client expectations and driving service delivery. You will have a hands-on approach to service and deliver value through developing and managing technical projects to solve customer problems.

• Provide routine service support to Sales Representatives in strategic district accounts to execute agreed upon customer system assurance and continuous improvement plans.
• Assist Sales Representatives with plant surveys of prospective customers.
• Assist Sales Representatives with start-ups of new applications in both existing customers and in new accounts.
• Develop strong relationships with the key stakeholders in the strategic district accounts where you provide service support to other District Sales Representatives.
• Provide technical support to customers; identifying and resolving customer pain points, escalating as required.
• Engage in problem solving by performing system analysis, interpreting data and providing written recommendations to ensure customer operations are performing at optimal levels.
• Support services include: Water Chemistry checks, light maintenance, customer service, service report generation, chemical ordering, chemical inventory management and top-up.
• Follow Ecolab safety guidelines and incident reporting requirements.

Requirements:

• Technical Degree or equivalent education with industry experience is preferred.
• Must have knowledge of and experience in materials, scheduling, inventory, manufacturing and installation processes.
• Excellent organizational, interpersonal, verbal and written communication skills are essential.
• Ability to manage multiple projects simultaneously and maintain project schedule timelines.
• Someone who can think logically and interject common sense and is prepared to make decisions.
• A self-motivated, goal oriented, as well as a team player

The role is primarily to support the Binnies Singapore office to secure and deliver the Coastal and Flood Risk projects in Singapore. In addition, the successful individual will require to provide support to UK offices to deliver their Flood, Coastal, and Maritime projects.

It is primarily a technical role involving participation in maritime and coastal related civil engineering projects and studies. The individual will require performing design tasks, various studies, engineering management, client liaising, and communicating with other teams and offices.

The individual may need to work as a coastal specialist working closely with the same discipline and other multidisciplinary teams. This is a great opportunity for the successful candidate to develop his/her technical and engineering management skills, particularly in various types of flood, maritime and coastal projects, and obtain international experience.

The key duties and responsibilities include but are not limited to:

• Design of coastal and coastal related structures
• Undertake various coastal studies
• Perform the projects/tasks within the agreed budget and programme
• Client liaising
• Attending meetings both internal external
• Progress monitoring & reporting
• Proposal preparation

Required Competencies

• CPD in the relevant specialist skill area
• BSc or MEng (Hons) Coastal Engineering
• Specialist knowledge of areas such as metocean studies, feasibility studies, Beach and shore management plan preparation, and detailed design
• Coastal engineering knowledge (tide, current, waves, wave overtopping, rubble mound structures, tidal and storm surge barriers, coast protection works)
• Sound knowledge of BS Maritime & Eurocode codes and industry-standard guidelines such as CIRIA and other relevant international standards and guidelines
• Performing calculations and desktop studies with limited guidance
• Project report writing
• Proposal writing
• Understands support needed by junior staff
• Team player
• Adaptable
• Experience work in multidisciplinary coastal projects
• At least 10 years of experience in planning, design and/or implementation of coastal, marine, reclamatin infrastructure projects
• Experience in project management in the planning, design and/or implementation of coastal, marine, reclamation infrastructure projects is a plus point
• Experience in client liaising and leading technical meetings

Education & training:

• BSc or MEng in Civil and Coastal Engineering
• A registered Professional / Chartered Engineer under the Civil / Coastal Engineering Discipline is a plus point

Background & experience:

• Post-graduation consultancy office experience

Knowledge base:

• Coastal engineering design & studies
• Knowledge of Eurocodes/BS 6349/CIRIA Guidelines

Skills:

• Site assessments
• Design of coastal structures
• Metocean studies and surveys
• Feasibility studies
• Good experience in using design software
• Excellent written and oral communication skills
• Client liaising
• Excellent interpersonal skills

Personal attributes:

• Proven ability to carry out design and other tasks reliably
• Always seeking improvement in design and delivery performance
• Recognises client needs and delivers solutions
• Self-motivated
• Willing to make international travel for both short and long terms assignments with a short notice.