Job Summary:

Technical Support:

• Provide technical support and propose solutions for wired and wireless networks.
• Address project-related queries effectively.

Change Management:

• Analyse, plan, coordinate, and implement change requests on existing network equipment.

Documentation:

• Maintain detailed system records (e.g., configurations, changes, problems, disaster recovery documents) for network devices.

Firewall and Network Device Management:

• Manage firewalls (Checkpoint, Cisco FTD, Palo Alto), Nexus switches, and F5 Load Balancers.

Requirements Gathering:

• Gather business and application requirements to plan, design, install, test, and implement systems in line with specifications and service levels.

TSM/ITIL Alignment:

• Apply ITSM/ITIL methodologies in daily operations, including change, incident, problem, release management, and CMDB updates.

Performance Monitoring:

• Monitor system performance and availability proactively and implement corrective actions to enhance service levels.

Incident and Problem Resolution:

• Respond promptly to incidents, perform root cause analysis, and provide temporary and/or permanent resolutions.
• Provide regular status updates to relevant stakeholders.

Service Continuity:

• Implement and maintain backup/restore procedures and disaster recovery plans to ensure continuous business operations.

Documentation:

• Create and maintain comprehensive documentation for all implemented networks.

Proposal and Solution Support:

• Assist in preparing proposals and delivering solution presentations.

Team Leadership:

• Lead a team of network engineers effectively.

Certifications:

• Attain and maintain key certifications required for partnerships with key vendors.

Mandatory Skills:

• Checkpoint Firewall

Preferred Skills:

• Network: Routing and Switching

• Firewall Administration and Operation

Experience:

• IT Experience: 3 Years

• Work Experience: 3 Years

1. shall possess relevant work experience in the supervision of LTA Roads, Viaducts/Bridge, Bus Depot, A&A works, and CAG/PUB.

2. Working Location: LTA Projects, Singapore.

Job Description

1. Shall supervise all civil, structural including structural elements for Bridge / Viaducts, Roads, and specialist engineering works for compliance with the LTA’s requirements and other authorities’ and agencies’ requirements for permanent works and temporary works.

2. shall be independent and energetic to perform permanent shift work and project management work.

3. shall be competent with all necessary Ministry of Manpower WS requirements e.g. Work-At- Height (WAH), Lifting work, Permit-To-Work (PTW), etc.

4. Proficiency in MS Excel, Powerpoint, and maintaining of proper daily work progress record.

Job Description:

Key Responsibilities:

• Support day-to-day Business-As-Usual (BAU) operations and data engineering activities for the Enterprise Data Warehouse.
• Design, develop, and maintain scalable data solutions for data storage, transformation, and analytics.
• Collaborate with cross-functional teams to ensure seamless data integration and operational efficiency.
• Troubleshoot and resolve technical issues to maintain system performance and reliability.
• Ensure adherence to best practices and standards for data engineering solutions.

Qualifications and Skills:

• A degree in Computer Science, Information Technology, or a related field.
• Strong hands-on experience in:Oracle PL/SQL
  Informatica PowerCenter
  
• Proficiency in SQL across any Relational Database Management System (RDBMS).
• Experience with Systems Development Life Cycle (SDLC) implementation methodologies and/or Agile frameworks (e.g., Scrum, Kanban).
• Ability to learn quickly, adapt to changing requirements, and work in an agile, fast-paced environment.
• Strong analytical and problem-solving skills with a passion for solving complex issues.
• Excellent teamwork and communication skills to collaborate effectively with technical and non-technical stakeholders.
• Experience with dbt Core or Snowflake is a plus.

The successful candidate will play a critical role in supporting the smooth operation of the Enterprise Data Warehouse while ensuring high-quality data engineering solutions and seamless integration across teams.

Job Description

• Undertake design and study of civil infrastructure work of road work, Sewerage, permanent and temporary traffic, drainage and utilities
• Familiar with the latest authorities’ design codes, specifications and requirements as well as submission procedures
• Able to be the design lead communicating and liaise with client and authorities while managing the team members design deliverable of drawings and reports.
• Able to liaise and coordinates with other design discipline/departments as well as managing sub consultants in preparation of drawing and reports for submission
• Able to communicate with clients and approving agencies for purposes of obtaining design information, presenting design intent and options and expediting approvals
• Able to supervise the team and carry out independent review of submission documents

Requirements

• Bachelor of Civil Engineering (or equivalent) – from a University recognized by Professional Engineers Board (PEB) of Singapore
• 1-2 years design experience in civil infrastructure works or transportation planning
• Good interpersonal and analytical skills
• Excellent technical and project management skills
• Usage of Microstation or Autocad design drafting tools; experience in Bentley design tools and transport modelling software will be an advantage.

Role Responsibilities

• Review of EPC engineering submissions for compliance with specifications, standards and contractual requirements.
• Participate in workshops, engineering reviews, other safety and quality activities including and not limited to HAZOP, DfS, 3D reviews and other meetings.
• As part of the site team representing the Owner, to inspect and witness the quality of installation and testing of the equipment per the contract.
• Attend local or overseas Factory Acceptance Test (FAT) as witness either on behalf of Owner or in concurrence with Owner per contract requirement.
• Coordinate with other disciplines to assure the quality of the Electrical deliverables in conjunction with other works such as the civil structure requirements, mechanical systems and overall project deliverables.
• Coordinate with other disciplines to ensure the timely delivery of the project where the electrical works may affect the schedule.
• Work as part of the site team to ensure the seamless coordination with Owner (including existing operations team) to deliver works requiring permits and access to existing sites.
• Conduct Electrical services site survey
• Assist Project Manager in up-keeping the project ISO quality documentation and records.
• Senior engineers must be able to lead projects and supervise a team of engineers / technicians.

Experience / Skills

• Degree in Electrical Engineering
• Minimum 3 years of hands-on design and commissioning experience in Energy/Infrastructure/Building projects
• Familiar with local code and authority submission procedure.
• Preferably with experience in tender document preparation, bids evaluation and due diligence studies
• Team player and able to work independent with minimal supervision

Site engineers work chiefly on construction projects. They form part of construction management and use their skills and expertise to guide crew members and ensure the successful completion of a project. Site Engineers frequently liaise with clients and negotiate with vendors and suppliers to secure the best deals.

Key Responsibilities:
1. Design and develop mechanical systems and components using CAD/CAE tools (e.g., SolidWorks, AutoCAD, ANSYS).
2. Perform structural, thermal, and fluid flow analyses to ensure the performance and reliability of designs.

3. Create and maintain detailed engineering drawings and documentation.
4. Conduct research and development on new technologies and materials.
5. Collaborate with cross-functional teams (e.g., electrical, software, manufacturing) to ensure successful product development.
6. Troubleshoot and resolve engineering problems.
7. Stay abreast of the latest industry trends and technologies.

Qualifications:
1.Bachelor's or Master's degree in Mechanical Engineering or a related field.
2. 3 to 5 years of relevant work experience in Manufacturing industry or areas of expertise,
3. Strong proficiency in CAD/CAE software (e.g., SolidWorks, AutoCAD, ANSYS).
4. Excellent analytical and problem-solving skills.
5. Strong communication and interpersonal skills.
6. Ability to work independently and as part of a team.
7. Experience with FEA technologies or tools.

Job Description

1) Liaise between suppliers, different sales sites, customers and factories.

2) Work closely with the design and engineering team of suppliers , customers and internal design centre in Japan and factories in Japan and Thailand.

3) Comprehend customer’s stipulated motor and base-plate design requirements

4) Review and resolve mould and part design matters / DFMs with solutions fit for volume production

5) Engage in the whole qualification / support cross functional audit of motor base assembly and base-plate production by customer and end customers.

6) Follow up with factories in Japan on data package preparation, sample preparation and prompt submission to customer

7) See through the product until it achieves customer’s final approval

8) Responsible for sales budgeting and forecasting

9) Resolve engineering/quality/cleanliness issues with suppliers and factories to ensure no disruption to customers

10) Manage day to day sales activities

11) To update Japan HQ on sales progress and translate English documents into Japanese language and Japanese work instructions / technical drawings into English language.

Requirements

• Degree in Electrical / Mechanical / Mechatronic Engineering or equivalent

• Min 2 years relevant sales experience in Japanese manufacturing MNC

• Good supporting knowledge in motor/base-plate mould and fabrication design

• Familiar with motor base assembly and base-plate manufacturing/machining processes/sequences

• Possess positive attitude, good inter-personal skills, strong leadership, self driven and able to work under stress and deliver assigned tasks under short notices

• Good problem solving / presentation / written skills

• Able to communicate with Japanese customers / vendors who speak little English.

• Able to translate documents & technical drawings from English to Japanese language

• Possess Class 3 driving license

Job Description & Requirements

Fast Flow is a highly specialised group of companies providing solutions for rainwater management in building projects across Asia Pacific.

Roles & Responsibilities

The Project Engineer is to support the Project Managers (PM) in the performance of their duties and coordination, site execution of rainwater system installations, testing and commissioning, to the successful handing over of project to clients.

JOB DESCRIPTION

- To assist the PM on multiple projects to programme and allocate manpower as required.

- Discuss inspection reports with the PM and ensure clear and accurate implementation of necessary actions and recommendations.

- Maintain records of inspections, actions and non-conformances.

- Assist in submission of shop drawings and material samples for conformance with project specification

- Assist PM in the planning of required, materials, plant, transport and equipment.

- Plan activities of allocated Site Supervisors and workforce under their control, in line with project requirements.

- Monitor Health and Safety on projects to ensure safe working practices are carried out in accordance to local regulations

- Ensure that projects are carried out within the labour and material budget parameters provided as advised by PM

- Check site progress and productivity, record and submit monthly progress claims for certification and payment.

JOB REQUIREMENTS

The successful candidate should possess a Diploma / Degree, or equivalent Technical certificate in Architecture / Mechanical / Civil or Building.

Preferably 2 year(s) of working experience in the related field.

A good communicator.

Project Engineer

Visit www.ppsjob.com.sg

JOB SCOPE

Overall supervision of assigned projects, to ensure timely completion of projects, within the approved budgets set by the Project Manager and the management.

Plan and prepare all project program with indication of Critical Path to complete assigned projects in a timely manner.

To liaise with all subcontractors, consultants and owners on project matters and to resolve all technical discrepancies and site issues.

To supervise and ensure that acceptable workmanship and quality of projects are obtained to the management and consultants’ approval.

To attend, prepare and report on project progress, milestones and targets during meetings.

To organize and to chair regular site meetings with subcontractors and suppliers.

To ensure quality of works is achieved and safety & environmental regulations are complied with

Manage public feedbacks pertaining to site issues

Any other adhoc projects and duties as assigned by management.

JOB REQUIREMENTS

Min Diploma in Civil Engineering / Project Management

Degree in Civil Structural Engineering recognized by Singapore Professional Engineers Board and BCA

Minimum 3 years working experience in building construction

Use of AutoCAD would be an advantage

Proficient in using Microsoft Office and familiar with Microsoft Project

Job Summary:

We are seeking a skilled and motivated Data Engineer with expertise in Scala, SQL, and Hadoop to join our dynamic team. In this role, you will design, develop, and maintain scalable data pipelines and systems to process large datasets. You will collaborate with cross-functional teams to deliver high-quality solutions for data storage, transformation, and analytics.

Key Responsibilities:

1. Data Pipeline Development

· Design, build, and optimize scalable data pipelines using Scala and Hadoop frameworks.

· Implement ETL processes for ingesting, transforming, and storing data from various sources

2. Data Analysis and Query Optimization

· Write and optimize complex SQL queries for efficient data retrieval and transformation.

· Troubleshoot and resolve performance issues in queries and data workflows.

3. Big Data Ecosystem Management

· Manage Hadoop-based data infrastructure, including HDFS, Hive, and related components.

· Monitor system performance and optimize resource utilization in a distributed environment.

4. Collaboration and Problem Solving

· Work closely with data analysts, data scientists, and business stakeholders to understand requirements and translate them into technical solutions.

· Provide technical guidance and best practices for data engineering within the team.

5. Automation and Monitoring

· Develop scripts and tools to automate repetitive tasks and enhance system monitoring.

· Ensure data quality and consistency through validation and monitoring mechanisms.

6. Documentation and Compliance

· Document technical solutions, workflows, and processes to ensure knowledge sharing and reproducibility.

· Ensure compliance with data governance and security policies.

Skills and Qualifications:

Technical Skills:

· Proficiency in Scala programming and functional programming principles.

· Strong SQL skills, including query optimization and database design.

· Hands-on experience with Hadoop ecosystem tools such as HDFS, Hive, YARN, and MapReduce.

· Familiarity with other big data tools like Spark, Kafka, or Flink is a plus.

Key Responsibilities:

• Install, maintain, and repair automatic and manual welding machines and/or CNC Machining
• Diagnose mechanical, electrical, and software-related issues and propose appropriate solutions.
• Conduct preventive maintenance and calibration of equipment to ensure optimal performance.
• Resolve production technical concerns and requirements.
• Provide in-house training on the proper use and maintenance of equipment.
• Create and maintain detailed service reports and documentation.
• Work closely with the sales and engineering teams to support product development and improvement initiatives.
• Stay updated on new technologies and industry trends to provide proactive support and recommendations

Requirements

• Proven experience as aService Engineer or similar role in the O&G industry
• Strong problem-solving skills and ability to think analytically.
• Excellent communication and interpersonal skills.
• Ability to work independently and collaboratively in a team environment.
• Willingness to travel frequently to Philippines and Malaysia as needed.

Roles & Responsibilities

Responsibilities

• Assist of design, develop & customize automation concepts in line with customer requirements with effective technical solutions in customer site.

• Review and improve existing automation solutions.

• Support and troubleshooting automated production line.

• Prepare automation system document, drawing, procedure & work instruction.

• Prepare maintenance procedures to training & supervise maintenance team’s program & activities.

• Knowlege & experience in panel making

• Participate of workplace health and safety, abide by all EHS policies and procedures; cooperate with Management and colleagues in EHS initiatives.

• Any other duties as and when assigned.

Requirement

• Degree in Mechanical / Mechatronics / Electrical / Electronic Engineering or equivalent

• Possess knowledge of industrial automation & engineering, PLC, CAD. Experience in automation design are advantages.

• Driving Licence with Class 3,2B are advantages

• Good interpersonal, communication and Microsoft skills

Only shortlisted candidate will be notify

Note

The above statements reflect the general tasks, duties, activities and/or responsibilities necessary to describe this position and is not intended to set forth all of the specific requirements of the job. These job duties/responsibilities may change or vary in response to business needs

• Oversee and manage construction activities at the site, ensuring adherence to project specifications, codes and safety regulations.
• Conduct regular site inspections to monitor progress, identify potential issues and ensure compliance with engineering and design requirements.
• Collaborate closely with project managers, architects and subcontractors to ensure timely project completion.
• Analyse and interpret engineering plans, aerial photography, blueprints, topographical & geologic data and technical drawings to plan and execute construction activities.
• Coordinate the procurement and delivery of construction materials, ensuring their compliance with industry standards.
• Identifying potential risks and implementing preventive measures to minimise project delays, cost overruns and safety hazards.
• Maintain accurate project documentation, including progress reports, site diaries, change orders and quality control measures.

• Preparation, checking and submission of drawings, catalogues and calculations for the assigned project.
• Assist Project Manager/Sr. Engineer for preparation of Vender approval submission
• Prepare and update project schedules
• Work out bill of materials and engineering deliverables.
• Attend progress/ technical meetings.
• Execution of project in accordance with general specifications, particular specifications, technical specifications and drawings, etc.
• Effective communication between engineering, technical, construction, and project control groups.
• Co-ordinate with clients, consultants, subcontractors and suppliers to ensure timely delivery of works
• Co-ordinate with subcontractors, suppliers and own teams for implementation of the projects and ensuring it is being built correctly
• Contributes to team effort by accomplishing related results as needed
• Monitoring and carrying out quality check on progressive completed works
• Develop method of statements and testing procedures for the works.
• Inspect installations and observe operations to ensure compliance with design and equipment specifications and safety standards
• Write reports and documentations.

Requirements

• Degree in Electrical Engineering
• Minimum 3 years of working experiences in electrical installation in industrial plants
• Technical skills and knowledge of HT, LT Switchboards, Transformers, Generators, Motor Starters, Testing and Commissioning
• Familiar with relevant Singapore standards and international standards
• Positive working attitude and ability to work in a fast-paced environment

Roles & Responsibilities

Job Description:

• Handle project planning, scheduling, monitoring and updating to meet project completion targets
• Perform site planning, coordination and inspection relating to the construction project so as to ensure that project completion timeline, requirements and budget are met
• Liaise with the BIM team to update the drawings or BIM Model with the latest information available timely
• Prepare as-built drawings or BIM Model and compile O&M Manual for submission
• To assist in project coordination and oversee of all Civil and Structural works on site and ensure all related activities are carried out as per drawings
• Review architectural & structural submission documents & submission drawings prior relevant authorities' submission
• Assist the Project team in site walk-down survey with other discipline engineers and Client representatives as required, in resolving technical issues until construction completion
• Liaise with internal and external parties for project management
• Any ad-hoc duties as assigned

Job Requirements:

• Minimum of 2 years’ experience
• Recognized Degree in Civil Engineering, Project Management, Structural Engineering or equivalent approved by PEB, BOA or SISV
• Good knowledge of technical design and engineering, construction methodology and construction planning
• Good oral, written and inter-personal communications skills in dealing with individuals and groups at all levels
• Proficient in Microsoft Office, AutoCAD and knowledge of BIM
• Independent, diligent, highly motivated with excellent team spirit and cope in a fast-paced environment
• Obtain CONQUAS supervisor certificate will be added advantage

Your Role
We are looking for an experienced Software Product Design Manager/ Software Development Manager (F&B App) in charge for software product design of F&B App. You will be understanding and data analyze customer needs, feedback, and the user experience. To liaise with product development teams to promote product implementation. To implementable and develop for SaaS services to ensure smooth company operations.

What Will You Do

• · In charge for software product design of Food & Beverage App
• · To understanding and data analyze customer needs, feedback, and the user experience
• · To liaise with product development teams to promote product implementation.
• · To implementable and develop for SaaS services to ensure smooth company operations

What Do We Want

• · Bachelor’s degree & above in IT / computer science or equivalent.
• · Have at least 5 years of product management experience in Food & Beverage App
• · Familiar with product development processes and project management
• · Have experiences use data analysis tools

What Will You Get In Return
You will be given exposure to a hold a key position in a growing organization with attractive rewards and a wide range of benefits. You will entitle a Gross salary up to S$9500 + attractive perks.

What You Need to do Now
Click "Apply" and please include the following information in your resume:

• Personal Particulars with recent photograph
• Education background
• Work experiences in point forms
• Reason(s) for leaving
• Current and Expected salary
• Date of availability / Notice Period

Note:
Only shortlisted candidate will be notified via email for an interview invitation

Job Highlights

• Good Salary Package, Performance Bonus, Allowance
• 5 Day Work Week
• SAFE Working Environment

Job Description

Responsibilities

• Break new grounds and penetrate the key industries as in; Food Packaging, Medical, Petrochemical, Chemical, Pharmaceutical, Semiconductor etc.
• Undertake the role to develop new and key accounts and strive towards achieving sales goals and objectives.
• Propose improved materials or products to customers and explain the benefits of the changes.
• Engage the customers on a day-to-day basis to initiate and coordinate sales activities.
• Preparation of sales proposal, quotations and attending customer’s enquiries
• Responsible for Sales target for Singapore region.
• Track and report sales activities; submit reports promptly.
• Be competent to undertake hands-on related issues arising from aftersales including onsite trouble-shooting.
• Create sales leads, follow up on sales opportunities and take ownership to follow up on quotations.
• Contract review prior to order entry – Evaluate and interpret customers’ specification against our offer. Clarify with customer where necessary to resolve unclear requirements. Be responsible to coordinate with Order Administration team on shipment update and information going back to the customer up to the point of delivery.
• Working closely with customers to find application possibilities and propose suitable technical solutions.
• Conduct competitive analysis and identify market price for various suppliers and market segments in Singapore.
• Conduct product and application training if necessary.
• All other ad-hoc duties as assigned by the company.

Requirements:.

• Degree/Diploma in business, marketing, engineering or any relevant field.
• 1 to 2 years of sales engineering experience.
• Excellent communication, sales, and customer service skills.
• Salary depends on experience.
• Prefer with vehicle ownership.
• Self-motivated and ability to work in a team or independently with minimum supervision.
• Meticulous, organized and great interpersonal skills.
• Cheerful and pleasant personality.
• Excellent written and verbal communication skills.
• Able to converse and write in English and Mandarin.
• Mandarin language will be an advantage to communicate with Mandarin-speaking clients and suppliers occasionally.
• Computer literate, knowledge of Microsoft Office software. Outlook, Word, Excel and PowerPoint is a must.
• 2 years contract subject to convert full time staff.

Job Type

2 Years Contract

Job Description:

• Responsible for planning, managing and ensuring smooth implementation and monitoring of projects assigned from inception to completion within the specified timeframe and of the desired quality.
• Liaise with authorities, consultants and subcontractors.
• Implement architectural and structural works.
• Good communication skills to enhance good team working spirit.

Requirements:

• Experience in management of projects will be advantageous.
• Recognized degree in Civil/Structural Engineering by P.E. Board / BCA.
• Initiative, self-motivated, possess a strong drive with high responsibility and result oriented.
• Preferably 1 - 5 years working experience in Civil & Structural works.
• Experience in engineering software and AutoCad would be an advantage.
• Fresh graduates may apply.

Job Responsibilities

• Responsible for the algorithm research and development, delivery, and customer support for ZOLOZ, the overseas business of Ant Group's security technology.
• Design algorithmic solutions for security scenarios targeting overseas customers, including task breakdown and the development of algorithm modules.
• Closely collaborate with product and solution teams to develop industry-leading AI commercial products, achieving advanced levels in the industry and delivering these to overseas customers.
• Explore the transformative changes and enhanced security that multimodal large models can bring to identity verification.

Job Requirement

• Possesses extensive experience and a strong background in machine learning/artificial intelligence, with a solid academic foundation and research creativity. Priority is given to those with expertise in computer vision, risk control modeling (Graph, NLP), and multi-modal large models.
• Has practical experience in algorithm engineering, leading or participating in the industrial implementation of algorithmic products or projects. Proficient in relevant programming platforms such as PyTorch, TensorFlow, Keras, etc. Experience with large model implementations is preferred.
• Holds at least a Master's degree in Computer Science, Computer Engineering, or related fields. A Ph.D. or publications in top-tier conferences/journals are preferred.
• Demonstrates excellent communication skills, along with the ability to collaborate and drive cross-team or cross-departmental projects. Preference will be given to candidates with B2B commercialization experience or fluency in English.

Responsibilities

· Provide technical lead in system and network design, with implementation for application system

· Execute full software development life cycle (SDLC)

· Produce specifications and determine operational feasibility

· Responsible for quality assurance, maintenance and enhancement of existing software libraries

· Participate in system acceptance testing and on-site deployment

· Work with Vendor to resolve software issues both on site and off site

· Comply with project plans and industry standards

Requirements

· Degree in EEE/Computer Science/Computer Engineering or equivalent

· Minimum 5 years of technical experience in software development

· Proficiency in C, C++, C#, or Java

· Knowledge of digital communications, Microsoft .NET, Scripting languages

· Knowledge of professional software engineering and best practices for the full software development life cycle, including coding standards, code reviews, source control management, build processes, testing, and operations

· Knowledge of Communication Stack Layer and various communication protocols like SNMP, TCP/IP, UDP

· Knowledge of Firmware development will be an added advantage

· Working location is in Ang Mo Kio

· Singaporeans only

Please submit resumes to [email protected] with the following details in MS Word format:

- Position applying for

- Current remuneration

- Expected remuneration

- Notice period

John Goh Meng Chye

EA License No : 06C4642

EA Reg No : R1102621

We regret that only shortlisted candidates will be notified.

Min. 4 years working experience in Rock piling foundation supervision during piling stage of the project; supervision in HDB BTO projects.

To carry out site supervision and inspection of the works to ensure the works are constructed to required quality and accuracy

Supervision & Inspection for bore piling, ERSS, earth retaining wall & precast work with approved dwg, specification, rule & regulation.

Monitoring in structural material test and checking Method Statements, tests and drawings

Work closely with Consultants, Client & authority and attend progress and technical meetings

Reply some RFA/RFI and Maintain updated drawings/RFA/ RFI, all site records

Assist and report to the Project Manager at site.

Ensure works are carried out according to the approved technical drawings, quality procedures, contractual, ISO and EHS requirements.

Coordinate with Consultant and team members for smooth operation of work.

Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

EA Licence No. 16C7962

a) Evaluate current architecture and technology stack for the Authority’s

systems, which includes system design and recommend architectural

solutions to align with business goals, technical requirements and

RFQ SPECIFICATIONS

Government policies;

b) Manage technology refresh and End-of-Service (EOS) product

replacements, including planning, product exploration, recommendations

and. implementations. The scope of technology management includes

developing and maintaining technology roadmaps, as well as overseeing,

providing guidance and supporting Authority’s appointed contractors

throughout the delivery, setup, testing, and deployment phases;

c) Define technical standards, best practices, and guidelines for software

development;

d) Conduct product and technology evaluation,

including making recommendations;

e) Review existing architecture documentations to ensure all documentations

are kept up to date. If required, to develop and maintain system architecture

documentations;

f) Conduct knowledge sharing and training when necessary;

g) Collaborate with stakeholders to gather and analyse project and

architectural requirements;

h) Monitor system performance and scalability, making recommendations for

improvements on a need-be basis; and

i) Architecting and solutioning for new systems, including designing high

level system architecture and developing solution and recommending

implementation approaches, ensuring alignment with the Authority’s

objectives and Enterprise Architect (EA).

17. The Onshore Software Architect proposed by the Contractor shall have at least 3

years of experience as a Software Architect or equivalent position and the

following experiences and qualifications:

a) Bachelor’s degree in computer science, Software Engineering, Information

Technology or equivalent would be preferred;

b) Relevant recognition and/or certification of his/her competency as an

Architect;

c) Strong knowledge of software architecture principles and design patterns;

d) Track record of design and implementing large scale systems;

e) Experience with on-premises, cloud or hybrid architectures;

RFQ SPECIFICATIONS

f) Experience and skills in the following would be advantageous:

i. Setup and implementation or technology refresh for system

infrastructure such as server, network, storage, middleware, monitoring

tools, etc.;

ii. Disaster Recovery and Business Continuity implementation, backup &

recovery processes and high availability architectures; and

iii. Cloud infrastructure and technology.

g) Knowledge on IT Governance frameworks such as ITIL, COBIT.

Responsibilities:

1. Assist mechanical and electrical engineers for system assembly, installation, commissioning, and troubleshooting.

2. Carry work assembly and installation according to design requirements, schematics, drawings or working instructions.

3. Undertake ad-hoc responsibilities assigned.

Knowledge, skills and experience:

1. NITEC/Diploma in Mechatronics/Mechanical/Electrical/Electronic engineering.

2. Knowledge on mechanical and electrical principles.

3. Able to comprehend electrical and electronic schematics and mechanical drawings.

4. Hands-on experience is a must, e.g. soldering, wiring, M&E assemblies, panel wiring, grinding, drilling.

5. Able to work with minimal supervision.

Expectations:

1. Team player

2. Attention to details

3. Strong in analytical thinking and problem-solving skills

4. Be responsible and self-disciplined

5. Assure quality and accuracy of work

6. Maintain tidiness, cleanliness and safety of co-working workspaces