1. Perform piping design and pipe support design.

2. Interpret and develop PFD & P&ID.

3. Apply international standard and practices such as ASME, ANSI code. Familiar with pipe / tank specifications, nozzle specifications and orientation of nozzles.

4. Perform Material Take Off (MTO) from piping drawings.

5. Perform pipe stress analysis and surge analysis.

6. Responsible for reviewing of piping/mechanical documents and specification from clients and consultants.

7. Responsible for review and check of all piping/mechanical documents and drawings from vendors and suppliers.

8. Prepare technical datasheet and specification.

9. Co-ordinate with engineers of either disciplines within the department.

10. Liaise with clients, consultants, sub-contractors to resolve technical issue at site or in office.

11. Lead and interface within inter-disciplines for all technical matters.

12. Pre-procurement preparation including evaluation of technical and commercial bid from vendor and supplier.

13. To provide engineering support in tendering of new project such as preliminary design, material and cost estimates etc.

14. Provide technical support to project team for on-going projects and resolve any technical issue on site.ue on site.

Job Description:

• Involved in the whole development life cycle
• Writing, executing, and maintaining test script for automation testing
• Running and analyzing automation test report
• Updating script through each release
• Setting up and maintenance of the testing environment, test data, and Jenkin configuration if required
• Maintaining and updating the framework when the library is upgraded
• Defining, maintaining the test automation framework, and ensuring that appropriate testing tools are selected and applied optimally
• Perform API interface testing, and API automation testing Performance testing
• Bug analysis and tracking
• Continuous improvement of the testing process and testing quality and efficiency
• Be across new technologies and research testing skills and techniques

Requirements:

• At least 4 years experience in QA (Automation) & Mobile Testing
• Extensive automation testing with hands-on experience using Selenium, Appium
• Working knowledge of scripting languages such as Javascript, Java
• Experience with story management and testing tools (e.g. Jira, Testrail)
• Familiar with API Performance Testing tools (K6, Locus…) is a plus
• Familiar with at least one API/Unit testing framework
• Write and execute manual test cases and then automate them
• Working knowledge about Functional and Non-Functional testing
• Good logical and structural thinking
• Strong sense of responsibility and result-oriented
• Good sense for quality, teamwork, and innovation
• Able to work independently or with limited assistance

*Please note that only shortlisted candidates will be notified

Onsite Support Engineer (L3)

Requirements:

• Degree/Diploma in IT or Equivalent
• Minimum 7 Years of experience in IT End User Support (L2/L3)
• Clear understanding and experience in handling End Point Computers and IOT Devices
• Good understanding of Client Server Architecture
• Working knowledge of basic LAN Networking, Cable crimping and basic troubleshooting
• Experience in Disc Encryption, Application Security, and Endpoint security at client level.
• Daily Security and Vulnerability management to maintain KPI and SLA.
• Basic understanding of Active Directory.
• Incident and Change Request support to users.
• Find solution for unseen IT related issues and documentation as SOP.
• Experienced handling large excel files with Vlook-up, pivot etc.
• Experienced in collaborating and managing vendor support.
• Excellent communication and interpersonal skills

Interested Applicants please forward your updated profile to [email protected]

Be part of a renowned M&E company

• Usually 5-day work week (9.00am to 6pm)
• Up to S$5,000
• Good corporate culture with long history

Responsibilities

• Lead and manage the fire protection team (consisting of 1 Assistant Engineer, 3 Technical Officers & 4 workers)
• Develop and implement fire protection strategies, standards, and policies in line with industry regulations.
• Create fire protection plans by working closely with other departments and contractors
• Design and execute fire safety training programs for facility staff and workers.
• Conduct regular inspections and testing to ensure compliance.
• Stay abreast of developments in fire protection systems, codes, and standards. Ensure the team remains updated on best practices.
• Liaise with regulatory bodies, fire departments, and other stakeholders to guarantee compliance with codes and regulations.
• Provide technical support to project teams, contractors, and other stakeholders as needed.
• Oversee the installation, repair, and maintenance of fire protection systems & also to ensure all fire protection systems are in good working condition
• Develop and monitor budgets, providing regular reports to the Director of Facilities Management.
• Maintain accurate documentation of projects

Job Requirements:

• Bachelor’s Degree or Diploma in Facilities, Mechanical Engineering, or equivalent.
• Preferably with a minimum of 3 or 5 years of experience in fire protection or facilities management, with a focus on fire protection.
• Strong knowledge of fire protection systems, principles, codes, and standards is advantageous.
• Experience in managing and leading a team of engineers and technicians.

The Engineer is responsible for the daily operations of the different sections within the Engineering department.

Primary Responsibilities

Daily Engineering Operations

• Operates equipment to deliver comfortable room temperature to hotel guest areas as required.
• Operates equipment to deliver clean water to the respective services in the hotel as required.
• Operates equipment to deliver clean hot water to the respective services in the hotel as required.
• Operates equipment to deliver clear and sharp visuals from television and satellites to hotel guest suites as required.
• Carries out preventive maintenance activities to hotel suites and function areas to the highest quality levels and in a timely manner.
• Plans and operates equipment effectively to deliver audio visual support to hotel events in a timely and efficient manner.

Management of Shift Operations

• Tracks and monitors equipment and facilities failures and rectification status.
• Maintains availability of components / materials needed for Engineering operations.
• Proposes and implements methods of rectification of technical issues in a timely and efficient manner.
• Checks all utilities meter readings and verifies optimal plant operations to ensure longevity and operational readiness at all times.
• Supports the operation of fire protection system and controls fire and safety risks in a timely and efficient manner.
• Supports and implements measures for Environmental Safety and Health compliance in a timely and efficient manner.
• Monitors all lightings on hotel grounds are in operation to ensure longevity and operational readiness at all times.

Operations of the Plant and Facilities

• Operates plant facilities efficiently to support every aspect of hotel operations to ensure longevity and operational readiness at all times.
• Carries out routine preventive maintenance of plant facilities to ensure longevity and operational readiness at all times.
• Organises and carries out statutory inspections of plant facilities to ensure longevity and operational readiness at all times.
• Carries out related service contract activities for each plant facilities in a timely and efficient manner.

Supporting Operations - Craftmen, Kitchen ad Laundry

• Co-ordinates activities with Housekeeping team to carry out all furniture repairs to the highest quality levels and in a timely manner.
• Co-ordinates activities with the respective departments to carry out painting in the hotel suites and function areas to the highest quality levels and in a timely manner.
• Plans and organises preventive maintenance for all equipment in the kitchens to ensure longevity and operational readiness at all times.
• Plans and organises preventive maintenance for all equipment in the laundry to ensure longevity and operational readiness at all times.

Other Responsibilities

• Operations and maintenance of elevators and dumbwaiters to ensure longevity and operational readiness at all times.
• Operations and maintenance of swimming pool and water fountains to ensure longevity and operational readiness at all times.
• Operations and maintenance of fire protection services to ensure longevity and operational readiness at all times.
• Operations of kitchen grease interceptors and sanitary system to ensure longevity and operational readiness at all times.
• Supports operation of television and satellites services for hotel suites in a timely and efficient manner.
• Supports operation of the public music system within the hotel in a timely and efficient manner.
• Reviews and procures equipment and parts for Engineering operations in a timely and efficient manner.
• Reviews and procures Engineering services for outsourced work in a timely and efficient manner.
• Ensures public is protected during maintenance works at all times and proper as well as approved signage is in place at all times.

Involvement In Wider Job Function Actions/Relationships

• Upholds Accor Values of Guest Passion, Sustainable Performance, Spirit of Conquest, Innovation, Trust and Respect, in the execution of all duties and responsibilities.
• Participates and supports sustainability in Corporate initiatives and programmes such as Planet 21 – Corporate Social Responsibility, Diversity and Inclusion, Women at Accor Generation, etc.
• Performs any other duties and responsibilities that may be assigned.

Candidate Profile

Knowledge and Experience

• Tertiary education in a related Engineering discipline.
• Minimum of 5 years of relevant experience in the hotel industry.

Competencies

• Detailed Engineering knowledge.
• Good interpersonal skills.
• Planning ahead.
• Great communicator.
• Good working knowledge of Microsoft Office and Microsoft PowerPoint.
• Ability to communicate with all levels of employees.
• Service oriented professionalism.
• Must work effectively and contribute as a team player.
• Able to deliver proposals effectively.
• Responsive to change effectively.
• Well groomed.
• Sense of urgency and able to set priorities.

Benefits of Joining Raffles Hotel Singapore

• 5-day Work Week.
• Duty Meals are provided.
• Colleagues’ Discount and/or Preferential Room Rates at worldwide Accor Hotels.
• Flexible Benefit – Dental/Optical/Vacation Expenses/Children’s Education.
• Medical and Wellness Benefit.
• Comprehensive Insurance Coverage.
• Local/Overseas Career Development & Growth Opportunities.
• Holistic Learning and Development Opportunities.

HLPS is the appointed dealer for Engine Dynamometers from USA like World-famous brand of Taylor and PowerTest which are used by Cummins, Caterpillar, Perkins, MAN, Port of Authority (Singapore) etc in Singapore.

It is also an appointed dealer for Mitsubishi generating set and aftermarket services in Singapore.

HLPS members advise on the genset business for Taiwan listed company like Solomon Technology Corporation (TPE 2359) and for Hong Kong listed company VPower Holdings (1608.HK).

It has an established arm to deal with Genuine spare parts of Cummins, Mitsubishi Heavy Industries, Caterpillar, MTU etc.

In line with our continued growth and expansion, we are looking for experienced and dedicated Mechanical Engineer/Electrical Engineer to join our Singapore team.

Job description:

· To manage maintenance and engineering activities for mechanical/electrical facilities in plants for safe and smooth operations.

· To coordinate and execute major field maintenance works with no compromise to safety of workers and integrity of facilities.

· Respond to customer emergency calls and resolve technical issues/troubles within tight schedule.

· Draft technical documents such as service report, inspection plans and test reports for internal review.

· Develop maintenance plans for building (M&E) systems to ensure they continue to function properly after construction.

· Conduct and arrange training for staff and contractor to enhance their skill and competency levels.

· Conduct site inspections to ensure construction progress and quality is maintained.

· Oversee site delivery, installation, testing and commission of components and its systems.

· Ensure all systems meet local and national codes and regulations.

Requirements:

· Possess a Degree/Diploma in Mechanical or Electrical Engineering.

· Minimum 3 years of relevant work experience in the equipment maintenance servicing of mechanical facilities in the construction and power industry.

· Hands on experience in troubleshooting and repair of static equipment and rotating equipment such as diesel engines, heat exchangers, pumps, compressors and blowers.

· Proficiency in Microsoft Office applications and Auto CAD software skills will be advantageous.

· Essential prerequisites include good analytical & problem-solving skills, ability to communicate with staff in different functions & contractors, and a strong spirit of collaboration & teamwork.

Other info:

· Work location: East of Singapore

· Possess valid class 3 or 4 driving license

· Work Hours: Mon-Sat (9am-6pm, 9am-1pm- Sat)

· Only shortlisted candidates will be contacted.

• To carry out electrIcal related detailed design and preparation of drawing
• To interpret and develop P&ID, technical data sheet preparation and I/O wiring diagram
• To carry out electrical calculation for the design
• Responsible for reviewing of electrical documents and specification from clients and consultants
• To check and review all electrical related drawings and documents from suppliers and vendors
• To liaise with clients, consultants, sub-contractors to resolve technical issue at site and in office
• To co-ordinate with engineers of other disciplines within the department
• To prepare Pre-procurement including evaluation of technical and commercial bid from vendor and supplier
• To provide engineering support in tendering of new projects such as preliminary design, material and cost esimates etc
• To provide technical support to project team for on-going projects and resolve any technical issue on site
• To assist in preparation of project schedule, related work procedure/method of statement and monthly progress claim

· Coordinates construction engineering activities to ensure that projects are implemented in accordance with plans, designs and specifications

· Interprets structural drawings for implementation in construction projects

· Reviews design and discusses modifications with consultants, providing engineering input and alternative methods to address construction challenges

· Raised RFI (Request for Information) on any discrepancies and ambiguities in the design drawings

· Works with construction team, including project managers, site engineers, architects and electrical and mechanical engineers to explain drawings, specifications and other technical information to answer their clarifications

· Conducts regular technical meetings with consultants and client to discuss and resolve construction issues

· Manages structural drafters and reviews shop drawings to ensure these are in compliance with the project specifications

· Monitors changes to designs, assessing effects on cost and assisting with variation negotiations

Maintained up to date documentation and filing system of all relevant technical reports and submissions, drawings and specifications

1. A Degree in Mechanical Engineering or Electrical Engineering from recognised universities.
2. At least five (5) years of practical working experience in the related field in building construction projects.
3. Report to Technical Manager, and assist in managing, planning and coordinating mechanical engineering or electrical engineering to meet time, cost and quality objectives.
4. Coordinate design and/or detailing with consultants, develop shopdrawings, review of submissions from subcontractors and liaise with other work disciplines.
5. Proficient in REVIT and AUTOCAD software applications.
6. Positive attitude, self-motivated, initiative and responsible.
7. Good communication and interpersonal skills.
8. Able to work independently.
9. Candidates with more than eight (8) years of relevant experience may be considered for senior positions.
10. Remuneration shall commensurate with qualifications and experience. Basic salary: $3,500 to $6,000, plus allowances.

Report to Senior Engineer (Civil & Structural) / Construction Manager.

Plan daily, weekly and monthly work for each section and liaise on work tasks and construction methods to be used with the foreman and workers.

Reporting to the Construction Manager for all production and labour related aspects of project.

Monitor progress of work, quality of workmanship compliance with requirements and Quality records.

Overall in-charge of construction of road tunnel, escape staircases, utilities & road diversions etc.,

Seek advice and resolve site engineering problems and with Construction Station Manager.

Assist Construction Manager in preparing materials/manpower/equipment/sub-con/supplier requirements for station works based on the baseline programme.

Monitor the progress and update Construction Manager on all issues.

Report/record events and instructions.

Check quality and quantity of subcontract work done.

Involve and pre-start meetings with sub-contractors to discuss method/progress/quality/safety and resources issues.

Interested candidate : Submit your CV to :- [email protected]

Job Description:

• To facilitate information exchange, participate in the majority of product development teams and group, including travel extensively between Europe, Asia and sometimes Africa; and as the bridging gap between the countries based on the specific development works.
• Be part of a team who have joint responsibilities for the overall system design and detailing of the system concepts.
• Refining the system architecture with the project team and keeping a firm eye on the issues of system safety, stability, security, system performance and resilience.
• Be meticulous in the reviewing and revising on the requirements of the various functions between the teams.
• Facilitate communication between Engineering teams and actively contribute to design elements when possible as a mediator of engineering information.

Requirements:

• Degree in Engineering or Applied Science from a recognized university.
• At least 3 years of work experience as an Engineer, with expertise covering all areas of a complex mechatronic system (mechanics, electronics, software, etc.).
• Experience in system design, knowledge of production process and best practices.
• Experienced with a suite of PLC tools and softwares like CODESYS 3.5, with experience in WAGO PFC200 would be advantageous.
• Experienced user of MatLab, Excel, python would be desirable.
• Experience with Autocad 2D, understanding of Single line diagrams and control schematics would also be advantageous.
• Desirable SCADA experience and communication protocols, like, MODBUS RTU / TCP is a plus.

RESPONSIBILITIES

• Manage central console management of all clients IT equipments

• Manage the helpdesk support for incoming and outgoing calls to support customers and ensure closure of all incidents

• Installation, configuration, operation, troubleshooting of customer IT equipments and/or software

• On-site service if issues require on-site support for resolution

• IT projects support and implementation

• Experience in Cyber Security, advanced networking and project management skills

Accountabilities and tasks:

• Enforce and adhere to the corporate IT Standards, policies and procedures governance for corporate infrastructure architecture, security and system administration.

• Perform periodic server health-check and security review.

• Perform network/server/firmware upgrading and patching technical whitepaper or implementation guide for superior.

• Perform network and system monitoring, health check, security review, system backup and restore.

• Liaise with 3rd party software/hardware vendors for support and escalation,

• Perform network installation, management, monitoring, design, and maintenance for Corporate, LAN, WAN, WIFI and equipment.

• Apply developed subject matter knowledge to solve common operational issues within established guidelines and by recommending appropriate alternatives.

• Conduct subject matter knowledge and/or other IT related training to users.

• Recommend and suggest improvements to allow more effective usage of IT Services and support.

• Manage and work with Service Desk System – incidents and requests plus end-user support.

• Perform installation, configuration, removal, upgrading Install and office automation software, PC and Laptop setup and asset disposal.

• Manage IT procurement, vendor management and asset management.

• Other ad-hoc duties as assigned.

TECHNICAL SKILLS

• Basic networking knowledge and email troubleshooting.

• Knowledge in using Microsoft Office (Outlook, Word, Excel, PowerPoint)

• Experience in installation, administration, troubleshoot and configuration of various Windows workstation and Windows Servers / Ubuntu Operating systems

• Hands on experience in basic printer, scanner, routers, switches, wireless, NAS etc troubleshooting and setup.

• Hands on experience with setup, maintenance of Microsoft 365, Google Workspace Cloud solutions.

• Hands on experience with remote access tools.

• Perform on site service if issues can’t be resolved remotely

• Able to work independently with professionalism

MINDSET

• Customer focus – Focus on solving customer IT issues with professionalism.

• Teamwork – Work closely with Sales and Technical team to fulfil customer’s requirement and issues

• Challenger Spirit – Always explore new ways to resolve issue and enhance productivity

• Constant upgrading – Always upgrade new technology skill sets and soft skills to service customer of highest standard

• Fast learner with good time management and organizational skills to deliver critical timeline

Preferred qualities / experiences:

• Minimum 2 years to 5 years of relevant working experience performing the functions of an IT Engineer. Experienced Candidates with more than 5 years’ experience can apply for Senior position.

• Candidates with experience in LAN/WAN, Desktop, Servers administration and support are highly preferred.

• Cisco Certified Network Associate (CCNA) and/or Microsoft Certified Systems Engineer (MCSE) preferred.

• Good technical knowledge and hands-on experience.

• Have a good understanding of IT audit requirements and compliance.

• To handle the full spectrum of project management
• To lead a site Management team to complete the project on time and within budget
• To inspire and motivate the site team to work effectively and efficiently
• To enforce appropriate measures so as to comply with the required standard of safety in execution of tasks.
• To drive high productivity on site using relevant cost saving methods at all times.
• To ensure that the documented Quality and workplace health and safety (WHS) policies are effectively implemented, maintained and reviewed.
• To ensure the Project Quality and WHS objectives are being met and any discrepancies are being addressed immediately.
• To ensure that the overall phases of the project is effectively coordinated and organized.
• To liaison with the client, consultant, suppliers (sub-contractors) and other relevant authorities on management issues pertaining to the project.

Requirements:

• Degree / Diploma in relevant Engineering discipline.
• Must have at least 5 years of post-graduate experience in project management
• Ability to handle Projects independently.
• Ability to display initiative in execution of tasks and being pro-active in the delivery of tasks
• Dealing professionally in managing tasks and consistently meet tight deadlines
• Attention to details and good problem solving skills

Description:

• The Assistant Engineer shall be able to interpret construction drawings and check the submissions for compliance to the Board’s requirements.
• To review submissions from construction contractors/QP/PE for works affecting water pipes;
• To collate the list of sites for site surveillance;
• To prepare submission report to record the number of submissions reviewed;
• To monitor alerts sent from the Board’s monitoring system and follow up with the construction contractors who are working near to water pipes; and
• To conduct any other works in relation to the submissions as required by the Board

Qualification

• Possess a minimum of Diploma certificate in Engineering or equivalent (Civil Engineering)
• Must be Singaporean.

• To carry out instrumentation related detailed design and preparation of drawing
• To interpret and develop P&ID, technical data sheet preparation and I/O wiring diagram
• To carry out instrumentation calculation for the design
• Responsible for reviewing of instrumentation documents and specification from clients and consultants
• To check and review all instrumentation related drawings and documents from suppliers and vendors
• To liaise with clients, consultants, sub-contractors to resolve technical issue at site and in office
• To co-ordinate with engineers of other disciplines within the department
• To prepare Pre-procurement including evaluation of technical and commercial bid from vendor and supplier
• To provide engineering support in tendering of new projects such as preliminary design, material and cost esimates etc
• To provide technical support to project team for on-going projects and resolve any technical issue on site
• To assist in preparation of project schedule, related work procedure/method of statement and monthly progress claim.

As a Project Engineer, your main responsibility is to supervise, execute and coordinate project activities together with a group of Engineers and Technicians leading to successful project completion. You will monitor and control project on schedule, within budgeted cost and quality standards. You will also work closely with consultant/owner to ensure project is delivered according to requirements. As an engineer, you are also required to perform system programming and troubleshooting during project implementation.

You should possess a Diploma/Higher Nitec in Electrical and/or Electronics or any Engineering related courses, with 2-3 years’ experience in site supervision and coordination with main contractors and subcontractors, must have hands-on experience in alarm, card access and CCTV system installation knowledge. Must be computer literate.

Please submit resumes to [email protected] with the following details in MS Word format:

- Position applying for

- Current remuneration

- Expected remuneration

- Notice period

John Goh Meng Chye

EA License No : 06C4642

EA Reg No : R1102621

We regret that only shortlisted candidates will be notified.

· Minimum 7 years of relevant experience

· Responsible for the planning activities within a project and organisation planning across all projects.

· Provide project Progress S curve, activity list, logic diagram (PERT , CPM), time scaled logic diagram, Bar chart, manpower histogram, resource and cost curves.

· Publish the planning weekly report of all projects and disseminate to key stakeholders.

· Overall project coordination liaising with engineering, procurement and construction team for the purpose of developing a fully integrated schedule.

· Follow through construction, commissioning, qualification and handover.

· Obtain input from project team members, contractors, suppliers and client to support the development of a baseline schedule, and subsequently to update schedule progress and forecasting.

· Use planning/scheduling principles and methods including: CPM scheduling techniques, Resource loading of schedules, Field Progress Measurement.

· Analyse critical path and highlight to project team.

· Coordinate and support the preparation of monthly spending plan curve.

· Provide a regular management update on the progress of the major activities in process improvements and quality improvements

· Any other tasks as assigned by your Superior/s

Responsibilities:

• Site viewing , co-ordination and oversee ongoing job progress for AV products
• Termination, testing, commissioning and project handover
• Perform preventive maintenance

Requirements:

• "O" Level/ITE/Diploma/Entry level preferable with electrical experience
• Computer/electrical/electronic knowledge will be added advantage
• Preferably possess Class 3 license
• Able to plan & work with sub-contractor to complete the project within a given time frame
• Possess good interpersonal and organization skills
• Good soldering skill on audio & video connectivity
• A good team player customer orientated

SPECIFIC RESPONSIBILITIES:

• ensures all drawings, bills of materials, purchase requisitions and quality checks are completed as per project schedule and ISO 9001 processes.
• conducts Design Reviews to analyze specifications, sketches, drawings, ideas, and related data to assess factors affecting component designs and the procedures and instructions to be followed.
• confers with customer representatives to review specifications and answer questions pertaining to installation of systems.
• supports during manufacturing, assembly, de-bug, and customer buy-off.
• writes technical reports, manuals and technical support documentation
• performs a wide variety of additional functions to meet project schedules and product deliveries
• reads, understands, and acts upon mechanical drawings including piece part and assembly drawings, work instructions, and procedures
• determines manufacturing methods, techniques, and procedures as required to perform tasks as required for to ensure designs perform as required
• designs test fixtures and setups as needs arise
• communicates with vendors to support procurement and to address issues
• Responsible for any other role as assigned by the Operations Manager

1. A Degree in Engineering(Civil and/or Structural) from local universities or universities recognised by the Professional Engineers Board.
2. At least five (5) years of practical working experience in the related field in building construction projects.
3. Report to Technical Manager, and assist in managing, planning and coordinating civil and structural works to meet time, cost and quality objectives.
4. Coordinate design and/or detailing with consultants, develop shopdrawings, review of submissions from subcontractors and liaise with other work disciplines.
5. Proficient in REVIT and AUTOCAD software applications.
6. Positive attitude, self-motivated, initiative and responsible.
7. Good communication and interpersonal skills.
8. Able to work independently.
9. Candidates with more than eight (8) years of relevant experience may be considered for senior positions.
10. Remuneration shall commensurate with qualifications and experience. Basic salary: $3,500 to $6,000, plus allowances.

1. A Degree in Mechanical Engineering or Electrical Engineering from recognised universities.
2. At least five (5) years of practical working experience in the related field in building construction projects.
3. Report to Technical Manager, and assist in managing, planning and coordinating mechanical engineering or electrical engineering to meet time, cost and quality objectives.
4. Coordinate design and/or detailing with consultants, develop shopdrawings, review of submissions from subcontractors and liaise with other work disciplines.
5. Proficient in REVIT and AUTOCAD software applications.
6. Positive attitude, self-motivated, initiative and responsible.
7. Good communication and interpersonal skills.
8. Able to work independently.
9. Candidates with more than eight (8) years of relevant experience may be considered for senior positions.
10. Remuneration shall commensurate with qualifications and experience. Basic salary: $3,500 to $6,000, plus allowances.

Electrical Engineer Responsibilities:

• Designing, maintaining, implementing, or improving electrical instruments, facilities, components, equipment products, or systems for industrial, commercial, or domestic purposes.
• Performing a wide range of engineering tasks by operating computer-assisted design or engineering software and equipment.
• Conferring with customers, engineers, and others to discuss existing or potential engineering products or projects.
• Ensuring that installation and operations conform to standards and customer requirements by preparing electrical systems specifications, technical drawings, or topographical maps.
• Establishing construction, manufacturing, or installation standards or specifications by performing a wide range of detailed calculations.
• Ensuring compliance with specifications, codes, or customer requirements by directing or coordinating installation, manufacturing, construction, maintenance, documentation, support, or testing activities.
• Writing reports and compiling data regarding existing and potential electrical engineering projects and studies.
• Preparing specifications for purchases of electrical equipment and materials.
• Supervising or training project team members.
• Estimating material, labor, or construction costs for budget preparation.
• Maintaining electrical equipment.
• Working with a variety of technicians.

Electrical Engineer Requirements:

• Bachelor's degree in electrical engineering degree from an accredited school.
• Licensed as a professional engineer.
• Experience in using or a desire to learn the required software.
• Knowledge of applicable codes related to electronic engineering.
• Proficient in design and calculation software.

Onsite Support Engineer (L2)

Requirements:

• Degree/Diploma in IT or Equivalent
• Minimum 4 – 9 Years of experience in IT End User Support (L2/L3)
• Clear understanding and experience in handling End Point Computers and IOT Devices
• Good understanding of Client Server Architecture
• Working knowledge of basic LAN Networking, Cable crimping and basic troubleshooting
• Experience in Disc Encryption, Application Security, and Endpoint security at client level.
• Daily Security and Vulnerability management to maintain KPI and SLA.
• Basic understanding of Active Directory.
• Incident and Change Request support to users.
• Find solution for unseen IT related issues and documentation as SOP.
• Experienced handling large excel files with Vlook-up, pivot etc.
• Experienced in collaborating and managing vendor support.
• Excellent communication and interpersonal skills

Interested Applicants please forward your updated profile to [email protected]

COMPANY DESCRIPTION

Beyondsoft International (Singapore) Pte. Ltd. was set up in 2007 and established as the regional headquarters for the Southeast Asia (SEA) and European markets in September 2015. Based on our vision of "Using technology to promote social progress, economic development and become a global customer preferred partner" and our concept of "Beyond your expectations", Beyondsoft is committed to provide our customers in countries along the "Belt and Road" with comprehensive solutions and products and creating commercial value for customers to realizing continuous businesses development.

Our core business includes:

1. IT development services providing customers with IT consulting, software research and development, software and hardware testing, system integration and operation and maintenance, data analysis and other services;
2. New retail solutions and products through intelligent products, helping small and medium-sized enterprises (SMEs) realize the digital transformation of their daily operations;
3. Internet of Things (IoT) platform and solutions comprehensive use of IoT, artificial intelligence, big data, cloud computing and other technologies to provide IoT solutions for intelligent upgrades in cities, parks, buildings and industries, to create a smart future.

For more information, please visit www.beyondsoft.com.

RESPONSIBILITIES

• Collaborate with cross-functional teams to design, develop, and deploy secure software solutions.
• Can implement DevSecOps practices to automate security testing, vulnerability scanning, and compliance checks throughout the development lifecycle.
• Continuously monitor and improve the security posture of our systems, applications, and infrastructure.
• Participate in Agile ceremonies, such as sprint planning, stand-ups, and retrospectives, to ensure timely delivery of features and enhancements.
• Mentor junior team members and contribute to the overall growth and success of the engineering team.
• Stay up-to-date on emerging security threats, industry trends, and best practices in DevOps and Agile methodologies.

• Bachelor's Degree in Computer Science, Engineering, or a related field (or equivalent experience).
• Minimum 3 years of experience as a software engineer, with a focus on DevSecOps and Agile development.
• Good understanding of DevOps principles, including CI/CD pipelines, infrastructure as code, and configuration management.
• Proficiency in programming languages such as Java, JavaScript/Typescript, and experience with version control systems (e.g., Git).
• Hands-on experience with security tools and technologies, such as SAST, DAST, SCA, and WAF will be added advantage.
• Familiarity with cloud platforms (e.g., AWS, Azure, GCP) and containerization technologies (e.g., Docker, Kubernetes).
• Strong analytical and problem-solving skills, with the ability to troubleshoot complex issues and implement effective solutions.
• Excellent communication skills and the ability to collaborate effectively with team members across different disciplines.
• Certifications such as Scrum Master or Certified DevOps Engineer are a plus.

Job Title: Costing & Manufacturing Engineer (ID5022)
Location: Gul Circle
Working Hours: Mon to Fri, 8am to 5pm
Salary: $3200 - $5000

Job Description:

This position is responsible for deciding the manufacturing sequence, routing, estimation, submission of quotes and close follow up on enquires to win orders. The Costing & Manufacturing Engineer is responsible to create job routings for confirmed orders in line with the quoted scope and customer bill of materials. This is a fast paced customer facing position.

• Perform costing of jobs.
• Responsible for submission of quotes and customer’s point of contact for clarifications as well as purchase order.
• Perform order processing from quotation to delivery.
• Create manufacturing process routings and job completion in ERP system.
• Liaise with customers and vendors on order requirements.
• Responsible for assigned customers’ sales revenue and margin targets.
• Liaise with operations team on high profile sales order manufacturing plan.

Requirement:
• Degree in mechanical engineering / manufacturing engineering (Diploma holders with similar industrial experience will be considered)
• Good understanding of precision machining processes.
• Well versed with manufacturing process & good understanding of material specifications common to Oil & Gas industry.
• Good communication and interpersonal skills.
• Self-driven individual with a positive learning attitude.
• Excellent spreadsheet skills with basic knowledge in ERP systems.
• Minimum 2 years of relevant experience in Oil & Gas machining or similar Industry.
• Candidates with no experience (Mechanical Engineering discipline) are also welcome to apply. On the job training will be provided.