(a) Checking the logs of the network equipment and network links every morning to ensure no abnormal activities;

(b) Install, maintain and upgrade all hardware, firmware and software used;

(c) Apply software and security patches as prescribed in Part 2C Patch Management Requirements;

(d) Fine-tune the network or system parameters;

(e) Patch/Re-Patch cables in patch panels, network points and all network equipment;

(f) Labelling of cables, patch panels, racks and equipment;

(g) Create, delete or modify access rights for the network equipment related user accounts in terms of authentication, authorisation and accounting;

(h) Connect Customer-approved network equipment to the Customer’s network;

(i) Manage IP addresses and IP assignment scheme;

(j) Manage firewall rules setting and security configuration e.g. add, delete or modify firewall rules, change encryption keys;

(k) Perform troubleshooting to resolve network issues;

(l) Manage incidents as specified in Part 2D Service Management Requirements;

(m) Document and maintain configurations of all network hardware, cabling information and software used in the operating environment;

(n) Perform routine backup of network configuration for network equipment including firewall rules;

(o) Perform NAC ClearPass administration for security posture check enforcement which minimally includes the following tasks:

(p) Analyse network utilization pattern and problems, recommend and implement corrective and preventive measures;

(q) Recommend new or improved hardware, software, configurations, etc. to enhance the existing system performance and management;

(r) Assist the Customer to evaluate new hardware and software for implementation in the operating environment, when required by the Customer;

(s) Enforce physical access controls to the network room and the equipment, including escorting its own Sub-Vendors and the Customer-appointed Supplier, and maintaining proper management of keys and access logs at all times; and

(t) Provide standby and support service for network upgrades, network implementation or building maintenance activities such as testing and servicing of building power generators, Uninterruptible Power Supply (UPS), air-conditioning and fire suppression systems, which may affect the

operation of the equipment in the network rooms.

Requirements-

· Network technologies and protocols;

· Network configuration;

· Network utilization and performance monitoring;

· Network fine-tuning, incident troubleshooting, interpretation of statistics and traffic pattern;

· Firewall rules configuration and security setting; and

· IDS/IPS, CDN implementation and IPv6;

· Familiar with Cisco and Alcatel and Palo Alto

Network support engineer shall have at least three (3) years of hands-on experience in configuring routers/switches (e.g., Cisco and Alcatel), firewalls, and intrusion detection/protection systems.

The network support engineer shall minimally have the Cisco Certified Network Engineer

certification, or equivalent, and have experience in WAN implementation.

.Supervise project team and sub-contractors to take positive actions and accountability for their assigned work and complete their works on time as per agreed.

· Liase with Client, Consultants and Project team for planning, executive and completion of projects.

· Manage and supervise the team of technical staff and subcontractors carry out maintenance services, schedules, improvement works . To make sure standards of building performance, quality, time and cost schedules and safety complied.

· Leading monthly meetings and submission of routine reports.

· Oversea and overall responsible for works carried out by Junior Supervisors assigned.

· Responsible for keeping daily work schedule.

· Attend regular meetings with client , supplier and sub-contractors.

· Analyze, manage and track projects costs against budget

COMPANY DESCRIPTION

Mediacorp is Singapore's largest content creator and national media network, operating a suite of TV channels, radio stations, and multiple digital platforms. Its mission is to engage, entertain, and enrich audiences by harnessing the power of creativity.

We are committed to creating an inclusive and diverse workplace where talent thrives. Our hiring decisions are made based on merit and fit-to-role. If you have a disability or special need which requires accommodation to participate in the recruitment process, please inform us when you submit your online application. We will be happy to support as necessary.

Thank you for your interest and application to this role. Please note that only short-listed candidates will be contacted.

RESPONSIBILITIES

• Ensure all monitoring system of the building management faciities are in good operating condition (error free) and feedback on all alarms and errors generated form BMS.
• Perform scheduling of facilities and building management services to facilitate events and arising requirement.
• Reporting and compilation of daily, feedback, building management facilities faults and activities.
• Operate the plant at the most efficient operating condition and ensure all abnormities are reported for corrective actions
• Validate all facilities & Building management maintenance work carried out by the contractors and ensure compliance to the prescribed standards
• Perform routine building management facilities activities including inventory control. Critical systems checks and functional testing. Able to respond and take action in response to facilities crisis management activities including: power outages, fire alarms, ACMV outages.
• Analyse data and identify trends with facility issues to determine root cause and take appropriate action.
• Responds to BMS alerts, investigate and feedback on any outstanding issues or events and respond to emergency situations and be on standby duty as required.
• Provide technical support to all aspects M&E operations including the operation, maintenance and repair of all mission critical equipment and systems supporting a 24x7 activities to achieve 100% uptime and 100% compliance with all customer SLAs.
• Assist in all site construction activities and installations, in coordination with external contractors to ensure system design, installation and testing adhere to operational standards. Witness testing of all equipment during commissioning and validate sequence of operations and receipt of all operational documentation.
• Maintain compliance with local workplace safety & health (WSH) standards and local electrical and building codes.
• Ensure adherence to all standard operating procedures (SOP) and emergency response procedures (ERP) established for the critical environments, as well as the formal change control process.
• Participates in the building management maintenance of all significant planned and emergency maintenance events for the facility and ensure these activities are executed in a controlled and proven method to ensure the reliability of the critical loads supported by these systems.
• Participates in cross functional coordination

• Higher Nitec / Diploma / Degree in Mechanical or equivalent.
• Minimum 3 years' of practical electrical and mechanical engineering experience in managing and implementing electrical & mechanical systems for critical building management facilities for telecom, broadcast or data centre buildings.
• Respect, Teamwork and Drive.
• Hands on Troubleshooting
• Stay contactable 24 x 7
• Perform rotation Shift duties

Job Responsibilities:

• Provide support, troubleshooting and guidance in areas of SAP Fiori, SAP HCM including OM, PA, TM, Payroll modules and the integration with other systems.
• Identify system improvements and enhancements, recommend and implement solution.
• Understand business processes and gather requirements from stakeholders for projects and change requests.
• Liaise between business and vendors to align the understanding to carry out works related to the support and new projects.
• Participate in business transformation journey and improve on business solutions to align with future IT roadmap.
• Maintain and support existing in house applications that are non-SAP.
• Any other ad-hoc tasks or projects as required.

Job Requirements:

• Bachelor’s degree in Information Technology, or related discipline.
• 3-5 years of relevant working experience, especially in areas of SAP HCM.
• Have completed at least 2 SAP HCM implementation.
• Good to have project management skillsets.
• Self-starter and take initiatives to work with minimal direction.
• Good verbal and written communications skills.

Welcome to the dynamic world of LAI Games, a leading Singapore-based game studio at the forefront of revolutionizing arcade entertainment. As a key player in the industry, we pride ourselves on crafting immersive and thrilling gaming experiences that captivate players worldwide.

We develop our games in house, often in collaboration with top-tier video game creators and integrating the newest hardware from renowned technology suppliers in our arcade games. We are dedicated to pushing the boundaries of innovation.

Join us on this exhilarating journey as we seek a hands-on Senior Software Engineer to strengthen our team in creating the next generation of thrills!

The ideal candidate is somewhat of a jack of all trades, not afraid to venture into new topics. You are experienced in game development in Unity or Unreal, but you are also not afraid to architect and implement the software for a physical game that includes contributions from several technology suppliers and game creators. You can interact with our firmware and hardware engineers to come to an overall design that meets expectations.

What You’re Responsible For

• Lead all software development aspects of arcade games, from concept to completion.
• Collaborate with cross-functional teams to gather requirements and define software specifications for our products.
• Work closely with our own hardware and firmware engineers and external contributors to integrate our software to ensure seamless functionality.
• Develop software for physical arcade games integrating motion systems, VR headsets, lighting, sound effects, computer vision and haptic feedback to a seamless experience for our customers.
• Ensure high-quality, reliable, and innovative software solutions for a captivating player experience.
• Design and develop robust and efficient software solutions that meet our standards to guarantee a safe, positive user experience.
• Perform thorough testing and validation of software components to ensure reliability, safety, and performance under arcade conditions.
• Participate in DevOps activities, including continuous integration, deployment automation, and security enhancements.
• Document the design processes: development, testing, analytics, and troubleshooting.

What We’re Looking For

• Bachelor's or master's degree in computer science, Computer Engineering, or equivalent field.
• At least five years of experience in game development, where contributions from several parties are combined under your guidance.
• Ability to lead a team and drive software development projects from start to finish.
• Proficient in C/C++, C#, Python, experience with Unity, Unreal.
• Familiar with programming micro controllers like Arduino or Raspberry pi.
• Familiarity with software development methodologies including Agile, and experience working in Agile environments, version control systems, software test frameworks, and software testing techniques.
• Strong analytical thinking and problem-solving skills and a commitment to delivering high-quality results.
• Excellent communication skills and the ability to collaborate effectively with multidisciplinary teams.
• Able to work under tight deadlines and respond to changing business and technical conditions.

Special Requirements

• Experience in integrating functions like motion systems, VR technology, and other interactive elements into a final product.
• Experience with electrical or mechanical engineering.

Besides working with an awesome team, in an arcade, and making games, we also offer:

• Competitive salary
• Performance bonus
• Training and education programs
• Private medical, dental, and life insurance coverage
• Flexible working hours
• Quarterly self-directed personal development days
• Finish work early every Friday afternoon for social drinks and games
• Work in a dynamic, creative arcade/workspace
• Team events - being a part of the out-of-home entertainment industry, we like to have frequent team events and enjoy what the industry has to offer

LAI Games is a global company committed to growing our employees along with the business. We’ve worked hard to foster an intensely collaborative and creative environment, a diverse and inclusive employee culture, and training and opportunities for professional growth.

Responsibilities:

Design mould, tooling and test socket solutions based on customer specifications, semiconductor packages, and testing requirements.

Utilize CAD tools (such as CREO, AutoCAD, SolidWorks, or similar) to create detailed 3D models and technical drawings.

Ensure designs meet mechanical, thermal, and electrical performance requirements for high-precision semiconductor testing.

Select appropriate materials, tolerances, and manufacturing methods to ensure product durability, precision, and cost-effectiveness.

Able to carry out the R&D of new test socket whenever the market trend is needed.

Work closely with cross-functional teams, including Sales, Product Development, Process Engineering, and Manufacturing, to refine designs and ensure compatibility with testing equipment and processes.

Provide technical support to manufacturing teams during prototyping, production, and assembly to resolve any design-related issues.

Engage with customers and vendors to ensure all moulds, tooling and test socket solutions meet functional requirements and industry standards.

Oversee the prototyping phase, ensuring that initial designs are built and tested effectively.

Lead or participate in validation and testing efforts to ensure the tooling and test sockets perform under specified conditions (e.g., temperature, mechanical stress, electrical signals, thermodynamics).

Analyse test data and provide feedback for continuous improvement in design and materials.

Continuously seek to improve design efficiency and product performance, optimizing socket contact interfaces, reducing testing time, and improving signal integrity.

Innovate by introducing new design techniques, materials, or technologies that improve the quality, reliability, and cost of the test sockets and tooling solutions.

Stay up-to-date with the latest semiconductor technologies and testing methodologies to ensure cutting-edge designs.

Develop and maintain comprehensive documentation for all designs, including detailed engineering drawings, materials specifications, and manufacturing processes.

Create user manuals and technical documentation to guide customers and internal teams on the proper usage of tooling and test sockets.

Qualifications:

At least Bachelor’s degree in Mechanical Engineering, Electrical Engineering, or related field.

Proficiency in & Hands-on experience with CAD software for mechanical design and simulation (e.g., CREO, SolidWorks, or AutoCAD).

Knowledge of materials science, particularly in relation to thermal management, wear resistance, and conductivity

Excellent problem-solving skills, with the ability to identify and address complex technical challenges.

Strong attention to detail and precision in design and documentation.

Ability to work independently and as part of a cross-functional team.

Effective communication skills for both internal team coordination and customer interactions.

Willingness to travel occasionally for customer visits, manufacturing site inspections, or vendor meetings.

Job Description

• Working on 6nm and below advanced process project APR and Timing/PI sign-off
• Take the TOP and PM role for the complicated hierarchical chip (more than 20M inst plus 500+ macros)
• Take the Block or Block coordinator role for complex blocks
• Do early prediction for critical APR/Timing/PI issues

Job Requirements

• APR/Timing/PI hands-on/tapeout experience on complicated hierarchical chip
• With min. 8 years relevant experience
• TCL/Perl/Python/C/C++ programming skill
• Have advanced process(n6 or below) experience is a plus
• Excellent communication and team work spirit

About the company

MediaTek Incorporated (TWSE: 2454) is the world’s 5th largest global fabless semiconductor company. Joining MediaTek means becoming part of a team that powers over 2 billion ICs worldwide, enriching and enhancing everyday life. Our chipsets are integral to a wide range of products, from smartphones, mobile devices to home and IoT devices, in entertainment and multimedia products, and provide connectivity and communication solutions that keep people connected with friends and their families with access to online resources. Working at MediaTek offers you the opportunity to contribute to the world through the devices we use in our daily lives – it’s more than just a job, it’s a chance to make a meaningful impact.

Job Description:

• Actively working with cross functional stakeholders to plan and develop new lithography process
• Validate mask designs, reticle tape out and post tape out verifications
• Actively participate in internal and external technical discussions to overcome process related challenges and provide relevant solutions
• Perform process characterization, margin study to determine the process capability of new process platform
• Act as subject matter expert and resource for researchers and industry partners to enable process and/or product realization
• Publish process development outcomes and breakthroughs in research community
• Engage with relevant equipment makers/vendors and responsible for selecting and procuring research equipment
• Work with fab team in establishing SPC for newly developed processes

Job Requirements:

• Bachelors/Masters in Materials Science and Engineering, Physics, Electrical Engineering, or closely related fields are welcome to apply
• More than 5 years of relevant working experience in R&D and/or industry environment and broad exposure in handling 6”, 8” and/or 12” substrate covering nano to micron technology nodes, preferably in SiC/GaN/Photonics
• Proficient in Photolithography tools including Immersion/KrF/I-line Scanner/Stepper/Mask Aligner, knowledge in eBeam Lithography tool will be added advantage
• Hands-on experience in metrology including but not limited to CdSEM, Overlay, OCD, DRSEM, Microscope. Capable to create recipe to support various research requirements
• Knowledge in design and simulation (ProLith, OPC,etc), and reticle layouts (OAS,GDS) review and basic tape out process
• Equipped with Photolithography skill set including fundamental lithography theory, Photoresist characteristic and application, new process setup (swing curve, FEM, DoE, Statistic Root Cause Analysis and problem solving methodology, etc), optimization and margin improvement.
• Relevant hardware and application knowledge in Photolithography tools and metrology.
• Possess good interpersonal and oral/written communication skills, with ability to deliver clear and concise messages to both internal and external stakeholders.

As the Research Engineer (Equipment/Operations), you are directly involved in tool installation activities for semiconductor process tools. You would need to work proactively to coordinate with the contractor on the ground for the execution and take corrective and preventive actions of lessons learned, due diligently to prevent reoccurrence. You are responsible for performing utilities turn-on after installation is completed. You must perform the activities per ASTAR site procedure and safety policies to ensure all tool-install-related activities are completed, meeting safety, quality, schedule and budget requirements. You will also be required to perform other activities such as operations for the different semiconductor modules (Diffusion, Litho, Dry/Wet Etch, Thin Film, Implant, etc).

Responsibilities:

• Coordinate with all tool-install base contractors to execute equipment hookup for new tools, to meet the high-quality standards, dynamic schedule, and forecasted budget.
• Coordinate with the Project owner (NGTC/APM) to facilitate utility release as per the planned schedule and update tool release status timely
• Follow all safety and environmental procedures to ensure compliance with EHS-related regulations, risk assessment, safe work procedures, and permit-to-work system.
• Play an active role in safety, actively participating in safety discussions and safe work practices.
• Establish regular area walks to identify opportunities for improved safety, cleanliness, housekeeping and efficiency
• Establish regular, working interaction with peers as well as vendors in tool installation & facilitation, communicating clearly and respectfully all relevant information.
• Keep the reporting officer informed regarding the progress of assigned work and any abnormalities observed in your area.
• Demonstrate ability to understand drawing and highlighting discrepancies
• Follow area-specific procedures and documentation
• Prioritize work tasks to meet schedule and expectations, minimum guidance
• Perform tool tool-relativities and cleanroom systems troubleshooting during the hookup phase
• To perform equipment trouble-shooting of the equipments in NGTC when the need arises
• To perform utility-on after installation completion and to work closely with LCAM for complete closure
• To perform tests balancing of exhaust for new tools whenever necessary
• To perform measures for tool consumption during the hookup phase and to work closely with LCAM
• Use methods to organize, calculate, and display data accurately for utility and flowrate measurement
• Perform site activities in accordance to the Discipline

Requirements:

• Degree/Diploma in Mechanical/Electrical/Chemical engineering or equivalent
• Semiconductor experience (Equipment & Process)
• Facilities field or Wafer Fab Manufacturing equipment background will be an advantage.
• AutoCAD

Job Description:

• Actively working with cross functional stakeholders to plan and develop new lithography process
• Validate mask designs, reticle tape out and post tape out verifications
• Actively participate in internal and external technical discussions to overcome process related challenges and provide relevant solutions
• Perform process characterization, margin study to determine the process capability of new process platform
• Act as subject matter expert and resource for researchers and industry partners to enable process and/or product realization
• Publish process development outcomes and breakthroughs in research community
• Engage with relevant equipment makers/vendors and responsible for selecting and procuring research equipment
• Work with fab team in establishing SPC for newly developed processes

Job Requirements:

• Bachelors/Masters in Materials Science and Engineering, Physics, Electrical Engineering, or closely related fields are welcome to apply
• More than 5 years of relevant working experience in R&D and/or industry environment and broad exposure in handling 6”, 8” and/or 12” substrate covering nano to micron technology nodes, preferably in SiC/GaN/Photonics
• Proficient in Photolithography tools including Immersion/KrF/I-line Scanner/Stepper/Mask Aligner, knowledge in eBeam Lithography tool will be added advantage
• Hands-on experience in metrology including but not limited to CdSEM, Overlay, OCD, DRSEM, Microscope. Capable to create recipe to support various research requirements
• Knowledge in design and simulation (ProLith, OPC,etc), and reticle layouts (OAS,GDS) review and basic tape out process
• Equipped with Photolithography skill set including fundamental lithography theory, Photoresist characteristic and application, new process setup (swing curve, FEM, DoE, Statistic Root Cause Analysis and problem solving methodology, etc), optimization and margin improvement.
• Relevant hardware and application knowledge in Photolithography tools and metrology.
• Possess good interpersonal and oral/written communication skills, with ability to deliver clear and concise messages to both internal and external stakeholders.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for a MECHANICAL ENGINEER/ SENIOR ENGINEER to be part of our FACILITIES DEPARTMENT diverse team of talent. You will be responsible for HVAC systems, Clean Room, Building services and maintenance.

What you will be working on:

• To provide facilities support pertaining to Clean Room, Chillers and HVAC systems, Environmental Protection Systems, Process Utilities Supply Systems, Building Services and Maintenance, and other miscellaneous mechanical and facilities systems to wafer fabrication so as to ensure continuous supply of utilities and related facilities at the required performance level or specifications
• Formulate, implement, review and improve preventive and predictive maintenance programs for systems in charge so as to ensure that the systems function as intended at all times
• Carry out repair and troubleshooting of systems in order to restore systems to their operating conditions in the shortest possible time. Carry out root cause analysis and implement action plans to prevent recurrence
• Able to formulate effective reporting and tracking systems for monitoring of system performance and capacity usage. Recommend and implement improvement/enhancement projects where appropriate.
• Formulate, implement, review and improve operating procedures so as to ensure optimum operation of systems
• Monitor and review utility consumptions and work with users to implement projects to reduce the consumption where possible
• Knowledge of all relevant standards, legislations, codes of practice etc and ensure their compliance
• Provide guidance and training on the systems in charge to fellow colleagues so as ensure adequate working knowledge and system backup
• Ensure plant histories, drawings, data and other appropriate documentations are being generated and properly filed for future reference and review.
• Evaluate and recommend appropriate spares, consumables and other resources necessary for the day-to-day operation of the systems.
• Conduct project supervisions.

More About You:

• Master / Degree in Science, Mechanical Engineering, Building or equivalent. Preferred candidate with SCEM certification.
• 5 years of relevant working experience in semiconductor, pharmaceutical or petrochemical industry. Hands-on experience in day to day operation and maintenance essential.
• Experienced in managing cleanroom (Class 100 environment) systems
• Person shall act as SME for ACMV system. Person must have sound knowledge of operation and maintenance of Clean room areas and ACMV system
• Provide building services and maintenance, including building facilities repair and upgrading, housekeeping, landscaping and pest control.
• Knowledge of maintenance principles and good engineering practices.

JOB SUMMARY

Industrial Engineer will be responsible for planning, designing, implementing, and managing; integrated, production and service delivery systems that assure performance, reliability, maintainability, schedule adherence and cost control within the production site. The Industrial Engineer II will adopt as its goals profitability, effectiveness, adaptability, responsiveness, quality, and the continuous improvement of products and services throughout their life cycles.

ESSENTIAL DUTIES AND RESPONSIBILITIES

· Project team member implementing projects that will eliminate waste, through the standard Industrial Engineering process
o This will include but is not limited to: Capital Equipment Requests, Capabilities Studies, Plant Layouts, Tool Design, and Standard Work
· Develop Time standards for process steps to be used in the Product-Process-Time database (IEDB)
· Gather and analyze Industrial Engineering metrics for assigned customer or area
· Coordinate layout and facility move(s) for assigned customer or area(s)
· Collect, analyze and review IEDB data to insure accuracy and compliance with the standard process
· Monitor the SAP and Manufacturing Execution System configurations and insure compliance with the standardized system configurations
· Gather and/or develop data for quotes
· Coach, mentor and train engineers within the Industrial Engineering team
· Support and/or maintain all lower level Industrial Engineering essential duties and responsibilities
· Insure the standardization of Jabil processes throughout the site in accordance with the global, regional and site direction
· Support the Lean organization by developing a solid process foundation and data integrity in order to support process improvement through the organization
· Comply and follow all procedures within the company security policy.
· May perform other duties and responsibilities as assigned

JOB QUALIFICATIONS
KNOWLEDGE REQUIREMENTS

· Key Requirements:
o Understanding and application of broad range of industrial engineering tools (ie. Work measurement, process mapping, facilities, and workstation design, etc.)
o Understanding of Jabil’s global strategies and direction
o Understanding of site’s facilities, capabilities and how they tie back to the Jabil strategies and direction
o Strong analytical ability
o Proven record of accomplishment of successful change management accomplishments, implementing and management continuous improvements and cost reduction programs
o Strong communication skills

· Proficiency in use of personal computers, Microsoft Office products, Microsoft Visio, Microsoft Project, and AutoCAD skills required.

Job Description

• Follow SOP and carry out CAS per specification.
• Execute scheduled / special preventive maintenance (PM) as per PM schedule and
• specifications.
• Troubleshoot basic equipment related issues and minimize equipment downtime.
• Maintain good housekeeping in the production floor / sub FAB / Office, and maintenance
• support areas.
• Ensure and follow good safety practice and also safe custody of tools, equipment and
• other properties belonging to the Module.
• Know how to use SPACE to monitor and analyze SPC charts. Understand all the PR rules
• and follow CAS correctly.
• Know how to use measurement instruments effectively in data collection. Able to create
• metrology job files correctly (equipment list to be defined by the Supervisors.)
• Perform shift duties (12-hours shift) to support the running of production in the Module and
• ensure equipment readiness and worthiness for production.
• Assist Engineer in the installation and hook up of new or upgrading equipment.
• Assist in implementing equipment improvement projects.
• Able to train operators and trainers in new operational procedures.
• Execute good maintenance of support tools.
• Assist new Technician/Associate Engineers on their On-The-Job-Training (OJT) by acting
• as their buddy.
• Provide proper and accurate passed down of line issues and documentation (fill up and file
• the checklists).
• Wafer scrap reduction awareness.
• Participate in CIP programs to improve productivity and quality of equipment/process.
• Coordinate with operators to ensure efficiency of work to meet Mfg and Module objectives

Job Requirements:

• Diploma Electrical / Electronics / Mechanical / Mechatronics / Microelectronics
• Experience in Etch tools / equipment (AMAT / Mattson)
• Able to perform 12-hour rotating shift
• An excellent team player with good interpersonal skill
• Strong logical thinking capability and good analytical skill
• Highly committed with good ownership and accountability
• Passion for the semiconductor / manufacturing industry
• Able to adapt in a fast pace environment and work under pressure
• Proficient in MS Office Applications

JOB SUMMARY

Snr Manufacturing Engineer (Medical) will be responsible for planning, designing, implementing, and managing; integrated, production and service delivery systems that assure performance, reliability, maintainability, schedule adherence and cost control within the production site. The Engineer will adopt as its goals profitability, effectiveness, adaptability, responsiveness, quality, and the continuous improvement of products and services throughout their life cycles.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Strong Knowledge in Healthcare business with ISO 13485 & FDA regulatory would be added advantage.

• Knowledge of assembly drawings, as well as the ability to interpret part drawings and specifications, is essential.

• Report writing, perform DFM and able to communicate within internal and external stakeholders. Able to perform Assembly process for High Level Assembly (HLA). Create procedures for processes and train staffs accordingly.

• Strong understanding on PFMEA, Process Flow, Control Plan and Process risk Assessments.

• Communicate frequently with operations, technical, and quality representatives within area of support through the tier process.

• Provide leadership and commitment in supporting continuous improvements in quality, productivity, and delivery performance through the deployment of continuous improvement framework.

• Reviews all inputs from the Engineering Department, including ECOs, new product releases, configuration control policies, and marking requirements, while also participating in the Design for Manufacturability (DFM) process.

• Solid understanding on BOM, ECN process, PCN and shop floor management will good plus.

• Monitor and continuously enhance daily quality and efficiency performance in assigned areas. Familiarity with Lean tools, such as Cycle Time, TAKT Time, and LBR, is crucial for assessing waste reduction and overall improvement.

• Participate in new product development by collaborating with R&D, New Product Development, and Quality teams to offer Design for Manufacturability guidance on hardware. A solid understanding of mechanical design is essential.

• Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor. Comply with all procedures within the company security policy.

REQUIREMENTS:

Candidate must possess at least a Diploma, Degree, Engineering (Mechatronic/Mechanical) or equivalent. At least 5 year(s) of working experience in the related field is required for this position.

Job requirement:

• Ability to perform first level investigation out of control situation and line excursions, abnormal lot/tool judgement due to inline OOC and OOS from SPC Chart.
• Process condition optimization.
• Work closely with equipment and production to ensure key module objectives are met.
• Evaluation to improve process margin.
• Cost reduction projects.
• Ensure safety, discipline and housekeeping compliance by all personnel.
• Analyze different types of defects and provide clear problem description with maintenance counterparts on troubleshooting.

Job requirement:

• Diploma in Electrical/Electronics/Chemistry/Microelectronics/Engineering or equivalent.
• Relevant working experience in Photo Process semiconductor front-end industry
• Willing to work in cleanroom environment.
• Able to perform 12-hour rotating shift
• An excellent team player with good interpersonal skill
• Strong logical thinking capability and good analytical skill
• Highly committed with good ownership and accountability
• Passion for the semiconductor / manufacturing industry
• Able to adapt in a fast pace environment and work under pressure
• Proficient in MS Office Applications

Job Description

• Follow SOP and carry out CAS per specification.
• Execute scheduled / special preventive maintenance (PM) as per PM schedule and
• specifications.
• Troubleshoot basic equipment related issues and minimize equipment downtime.
• Maintain good housekeeping in the production floor / sub FAB / Office, and maintenance
• support areas.
• Ensure and follow good safety practice and also safe custody of tools, equipment and
• other properties belonging to the Module.
• Know how to use SPACE to monitor and analyze SPC charts. Understand all the PR rules
• and follow CAS correctly.
• Know how to use measurement instruments effectively in data collection. Able to create
• metrology job files correctly (equipment list to be defined by the Supervisors.)
• Perform shift duties (12-hours shift) to support the running of production in the Module and
• ensure equipment readiness and worthiness for production.
• Assist Engineer in the installation and hook up of new or upgrading equipment.
• Assist in implementing equipment improvement projects.
• Able to train operators and trainers in new operational procedures.
• Execute good maintenance of support tools.
• Assist new Technician/Associate Engineers on their On-The-Job-Training (OJT) by acting
• as their buddy.
• Provide proper and accurate passed down of line issues and documentation (fill up and file
• the checklists).
• Wafer scrap reduction awareness.
• Participate in CIP programs to improve productivity and quality of equipment/process.
• Coordinate with operators to ensure efficiency of work to meet Mfg and Module objectives

Job Requirements:

• Diploma Electrical / Electronics / Mechanical / Mechatronics / Microelectronics
• Experience in Photo / Track equipment tools
• Able to perform 12-hour rotating shift
• An excellent team player with good interpersonal skill
• Strong logical thinking capability and good analytical skill
• Highly committed with good ownership and accountability
• Passion for the semiconductor / manufacturing industry
• Able to adapt in a fast pace environment and work under pressure
• Proficient in MS Office Applications

Job Description:

• Developing and optimizing thin film processes, such as Physical Vapour Deposition (PVD) and e-Beam Evaporation for Micro-Electro-Mechanical-Systems (MEMS), Wide-Band-Gap (WBG) and Photonics applications.
• Thin film property characterization and process issue troubleshooting.
• Develop film defect reduction and yield improvement strategies.
• Act as a subject matter expert and resource for colleagues in integration teams.
• Work with Fab team in establishing statistical process control for thin film module.
• Generate and present reports to both internal and external customers.

Job Requirements:

• Bachelors/Masters in Materials Science and Engineering, Physics, Electrical Engineering, or closely related fields are welcome to apply.
• 3+ years direct industry experience in PVD and evaporation is preferred.
• Good understanding of thin film deposition techniques, defect reduction methodologies, yield improvement and thin film property characterization is desired.
• Understanding of thin film tool hardware, especially PVD and evaporation, is advantageous.
• Knowledge and prior hands-on experience on basic process characterization techniques such as SEM/TEM, EDX, SIMS, FTIR, XPS, ellipsometry is advantageous.
• Good understanding of thin film deposition techniques, defect reduction methodologies, yield improvement and thin film property characterization is desired.
• Possess good interpersonal and oral/written communication skills, with ability to deliver clear and concise messages to both internal and external stakeholders.

Job Description:

• Developing and optimizing thin film processes, such as Physical Vapour Deposition (PVD) and e-Beam Evaporation for Micro-Electro-Mechanical-Systems (MEMS), Wide-Band-Gap (WBG) and Photonics applications.
• Thin film property characterization and process issue troubleshooting.
• Develop film defect reduction and yield improvement strategies.
• Act as a subject matter expert and resource for colleagues in integration teams.
• Work with Fab team in establishing statistical process control for thin film module.
• Generate and present reports to both internal and external customers.

Job Requirements:

• Bachelors/Masters in Materials Science and Engineering, Physics, Electrical Engineering, or closely related fields are welcome to apply.
• 3+ years direct industry experience in PVD and evaporation is preferred.
• Good understanding of thin film deposition techniques, defect reduction methodologies, yield improvement and thin film property characterization is desired.
• Understanding of thin film tool hardware, especially PVD and evaporation, is advantageous.
• Knowledge and prior hands-on experience on basic process characterization techniques such as SEM/TEM, EDX, SIMS, FTIR, XPS, ellipsometry is advantageous.
• Good understanding of thin film deposition techniques, defect reduction methodologies, yield improvement and thin film property characterization is desired.
• Possess good interpersonal and oral/written communication skills, with ability to deliver clear and concise messages to both internal and external stakeholders.

As the Research Engineer (Equipment/Operations), you are directly involved in tool installation activities for semiconductor process tools. You would need to work proactively to coordinate with the contractor on the ground for the execution and take corrective and preventive actions of lessons learned, due diligently to prevent reoccurrence. You are responsible for performing utilities turn-on after installation is completed. You must perform the activities per ASTAR site procedure and safety policies to ensure all tool-install-related activities are completed, meeting safety, quality, schedule and budget requirements. You will also be required to perform other activities such as operations for the different semiconductor modules (Diffusion, Litho, Dry/Wet Etch, Thin Film, Implant, etc).

Responsibilities:

• Coordinate with all tool-install base contractors to execute equipment hookup for new tools, to meet the high-quality standards, dynamic schedule, and forecasted budget.
• Coordinate with the Project owner (NGTC/APM) to facilitate utility release as per the planned schedule and update tool release status timely
• Follow all safety and environmental procedures to ensure compliance with EHS-related regulations, risk assessment, safe work procedures, and permit-to-work system.
• Play an active role in safety, actively participating in safety discussions and safe work practices.
• Establish regular area walks to identify opportunities for improved safety, cleanliness, housekeeping and efficiency
• Establish regular, working interaction with peers as well as vendors in tool installation & facilitation, communicating clearly and respectfully all relevant information.
• Keep the reporting officer informed regarding the progress of assigned work and any abnormalities observed in your area.
• Demonstrate ability to understand drawing and highlighting discrepancies
• Follow area-specific procedures and documentation
• Prioritize work tasks to meet schedule and expectations, minimum guidance
• Perform tool tool-relativities and cleanroom systems troubleshooting during the hookup phase
• To perform equipment trouble-shooting of the equipments in NGTC when the need arises
• To perform utility-on after installation completion and to work closely with LCAM for complete closure
• To perform tests balancing of exhaust for new tools whenever necessary
• To perform measures for tool consumption during the hookup phase and to work closely with LCAM
• Use methods to organize, calculate, and display data accurately for utility and flowrate measurement
• Perform site activities in accordance to the Discipline

Requirements:

• Degree/Diploma in Mechanical/Electrical/Chemical engineering or equivalent
• Semiconductor experience (Equipment & Process)
• Facilities field or Wafer Fab Manufacturing equipment background will be an advantage.
• AutoCAD

What you'll do

• Collaborate with the founders & business stakeholders to translate business goals into product strategy, defining value propositions, product assumptions, and hypotheses
• Own and prioritise the roadmap for a core product vertical, balancing inputs from stakeholders, customers, market research, and industry insights
• Appraise new product ideas and strategise appropriate go-to-market plans
• Lead the ideation, technical development and launch of innovative digital solutions
• Define and communicate product requirements and specifications by thinking creatively and holistically about how to solve problems
• Work collaboratively with Engineering, Design, Data to deliver high-quality functional solutions
• Work with marketing and other commercial stakeholders on go-to-market launch plans
• Mentor and coach junior product managers, fostering growth and development within the team

Who we're looking for

• At least 6 years of experience in product management role or similar position, preferably in Software/ SaaS/ eCommerce companies, with demonstrable success in launching new products/ features with clear impact
• Bachelor’s degree in computer science, software engineering, information technology, business, finance, economics or related fields
• You like to work in an environment that is obsessed with the "why"
• Strong passion for creating exceptional product experiences and solving complex merchant challenges
• Have an exceptional product and business judgement, and a high level of product management competencies
• Excellent communication skills, both written and verbally, with structure and clarity
• Excellent project management & cross-function collaboration skills
• Strong people skills, experience in working with and able to influence multiple internal and external stakeholders
• Critical thinker with strong problem-solving and coordination skills
• Knowledge of project management & documentation tools such as Jira & Notion
• Knowledge of wireframing & design tools, such as Balsamiq, Miro, Figma, etc
• Passion for building delightful product experiences and genuine excitement for solving merchant problems
• An entrepreneurial spirit who is self-driven, can thrive in ambiguity, create their own structure and get things done

Nice to have

• Experience with SQL or a willingness/aptitude to learn
• Keen sense of aesthetics / belief that software should be both beautiful and functional, with a low floor, high ceiling approach—simple enough for new users, but powerful enough for experts
• Experience in a startup or strategy consulting

If you are driven and want to make an impact, we want to speak to you. Drop us your resume and portfolio now and we’ll get back to you soon.

Job Responsibilities:

• Novel BCD platform device development.
• TCAD device simulation and deck calibration.
• Device test key design, layout, analysis.
• Device bench testing (DC/HV/reliability) and characterization.
• Device tuning, on time delivery, pass reliability qualification.

Required Capabilities:

• Solid semiconductor device physics and analysis skill, strong knowledge on bipolar and power devices.
• Experienced in BCD device development/ characterization is preferred.
• Hands on TCAD simulation/ calibration, layout skill, power device bench test is preferred.
• Good communication and team work skill.
• Self-motived and avid learner.

Qualifications:

• Preferred Master's or Ph.D. degree in Physics or Electrical Engineering.
• Relevant working experience in BCD development is preferred.
• Proficient in both oral and written English.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an Equipment Engineer to be part of our Diffusion Department diverse team of talent.

Responsibilities:

• Responsible for daily operations in the Diffusion CMP Equipment Module.
• Perform corrective & preventive maintenance on equipment to maintain good quality & productivity performance.
• Provide 24×7 support for troubleshooting equipment & problem solving in Factory operations floor.
• Maintain documentations for equipment installation, maintenance and troubleshooting procedures for reference purposes.
• Develop continuous improvement to enhance equipment reliability and cost of ownership.
• Drive innovation in factory automation, processes and systems to improve productivity.
• Coordinate, supervise & develop a team of high performance equipment engineers.

Requirements:

• Degree in Chemical/Electrical & Electronics/Materials/Mechanical/Microelectronics/Physics or equivalent
• Familiar with Mirra polishing tools and DNS Scrubber
• Highly motivated & strong team player
• Possesses good communication and interpersonal skills
• Quality 1st mindset & strong analytical, problem solving skills

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an Sustainability Engineer (ESG) to be part of our Supply Chain Department diverse team of talent. You will be responsible to support Company’s Environmental, Social and Governance (ESG) projects.

What you will be working on:

Project Management

- Lead and manage ESG projects & initiatives from inception to completion, ensuring alignment with corporate sustainability goals.

- Develop project plans, timelines, and budgets, and coordinate resources effectively.

- Prepare Capex Justification presentation in an accurate and timely manner to facilitate Management Team decision making

- Project lead in a cross functional team to ensure project schedule is executed in a timely manner and meeting project budget

Supply Chain

- Assist and take lead to drive the initiatives especially on Scope 3 Emissions

- Assess and quantify upstream and downstream emissions from the organization’s value chain, including suppliers, products, and waste disposal.

- Collaborate with suppliers and partners to develop and implement emission reduction initiatives, such as sustainable sourcing practices and transportation efficiency improvements.

- Review Supply Chain SOP & OI and ensure they are updated to ESG requirements

Reporting and Compliance

- Support Supply Chain Department on Company’s requirements for reports on sustainability metrics, including greenhouse gas emissions, energy consumption, and waste generation.

- Ensure compliance with regulatory requirements and industry standards related to sustainability and environmental management.

- Handle Compliance, Internal, Exernal and Customer audits to ensure compliance

- Liaison with related government bodies on grant and commercial apects

Continuous Improvement:

- Monitor and evaluate the effectiveness of sustainability initiatives and recommend improvements based on data analysis and industry best practices.

- Stay updated on emerging trends, technologies, and regulations in sustainability and incorporate relevant advancements into project strategies.

More about you:

• Degree in Chemical/Gas, Mechanical, Environmental, health and safety & other engineering.
• Possess knowledge on ESG, IPCC, RCA
• Preferably 4-5 years purchasing experience or engineering experience in a front end semiconductor plant .
• Knowledge and relevant experiences in Conflict Mineral, Green Procurement is a bonus.
• Knowledge in handling audits for Scope 1 emissions is a bonus

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.

The candidate is part of the Data Loss Prevention (DLP) project and operation team. He/she will be reporting to the DLP Lead and be assigned with project and operational work and responsibilities which includes but not limited to, processing requests, investigate operational issues and facilitate security investigation by providing the necessary information in accordance with approved policy and procedures as well as process improvement.

• Plan, deploy and implement Data Loss Prevention on security projects and initiatives
• Responsible for management, advanced configuration, monitoring and fine tuning of Data Loss Prevention solution
• Configure, develop and maintain DLP tools & platform, SIEM and threat detection tools
• Diploma/Degree in Computer Science, Engineering or equivalent
• At least 8 years of experience in IT Incident Management, DLP Operations or SOC
• Experience in multiple channels of DLP implementation and operations
• Good team player as well as strong communications skills
• Strong analytical skills and ability to work independently

SSMC (Systems on Silicon Manufacturing Company Pte. Ltd.), is a Joint Venture between NXP and TSMC. We offer flexible and cost effective semiconductor fabrication solutions by maintaining fully equipped SMIF cleanroom environment, 100% equipment automation and proven wafer-manufacturing processes.

At SSMC, every career journey is unique and rewarding. We're looking for innovative, passionate, and talented people like you to join our team.

We’re searching for an SAP ABAP Engineer to be part of our IT Department diverse team of talent. You will be responsible to maintain and develop SAP ABAP Programs.

Responsibilities:

• Perform ABAP enhancements and changes for various SAP modules and interfaces
• Ensure ERP system complies with SOX security requirement and SOX audit execution
• Provide support to end-users requirements
• Assist in troubleshooting operational issues
• Drive continuous improvement in work processes and environment to achieve assigned section/department and/or company KPI
• Mentor and coach junior staff

Requirements:

• Candidate must possess at least a Diploma or Bachelor's Degree or Professional Degree in Computer Science/ Engineering/ Information Technology or equivalent
• At least 3 years of relevant experiences in SAP ABAP programing.
• Experience in SOX audit execution will be highly preferred
• Experience in Software Development Life Cycle Process
• Experience in SAP modules will be preferred

SSMC is committed to equal employment opportunities and abides by the Tripartite Guidelines on Fair Employment Practices (TGFEP). All qualified applicants will receive non-discriminatory consideration for employment on the basis of merit and regardless of age, race, gender, religion, marital status and family responsibilities, or disability, or any other attributes as protected by the relevant laws.