Job Description:

• Calculated BOQ and invited subcontractor for cost estimation.
• Sourced Quotations and Specifications from suppliers and contractors.
• Collected BQ and arranged cost comparison.
• Attended internal, external meeting
• Performed site inspection to ensure that work is carried out based on specification and drawing.
• Prepared report and method statement whenever necessary.
• Supervised daily site installation.
• Day to Day management of the site, including supervised and monitored the site labour force.
• Inspected Handover inspection with consultant engineer and client.

Responsibilities :

• Checked technical specifications, M&E drawings and documents.
• Coordination of drawings with clients, main contractors and updating of drawings base on meetings and discussion.
• Produced M&E Services design drawing including electrical system and ELV system, Fire Protection system, Plumbing and waste, etc.
• Performed draft detailed for M&E shop drawings, as built drawings and standard detail and SLD drawing, Layout, Schematic based on preliminary concepts, sketches, calculation, specification sheets and other data.
• Provided technical support and assistances to project manager and engineers at every project stages.

About Us:

VFlowTech (VFT) is reinventing energy storage with Vanadium redox flow technology, with a vision to develop the cheapest and most scalable Vanadium redox flow batteries in the world. VFT solution is proven to be one of the safest, most durable and environmentally friendly battery technologies.

VFT is a spin-off of the CleanTech lab of Nanyang Technological University (NTU), Singapore, and benefits from unique IP arising from many years of intensive research at NTU. VFT founders and management team have deep experience in the renewable space, and Vanadium redox flow technology.

VFT is passionate about powering tomorrow’s energy demands in a sustainable way. To achieve this, we believe in attracting great talent through the creation of a vibrant, progressive workplace that makes them our greatest assets. We’re always on the lookout for experienced and passionate individuals to be part of the team, working and collaborating effectively to make a positive difference.

Role Responsibilities:

• Testing of the system during FAT (factory acceptance test) following the test procedures and prepare test and QC reports
• Installation, testing and commissioning of our battery on site at customer sites in various countries
• Provide support and guidance to customer for electrical connection of the battery to renewables, DG and loads.
• Filling of the liquid electrolyte in the battery with strictly following the safety standards, as per service documents provided.
• Testing of PCB circuit boards, relays, BMS components, sensor signals, protection components, ACDB, DCDB etc before turning on of the system.
• Configure battery inverter to set the requirement as per country standards.
• Use of external DC power supply to pre charge the battery, following the service manual.
• Troubleshoot of the various problems that may arise during the operation of the battery including hardware and software issues.
• Remote monitoring of all the battery units deployed and track of operation and troubleshoot problem if arises
• Generate on-site service report and documents clear problem statements and resolving.

Requirements:

• Diploma/Degree in Electronic and Electrical Engineering or relevant discipline with minimum 1-2 years of relevant experience in power management/control Industry. Previous work experience on battery technology would be beneficial.
• You should have strong and relevant background in working in a hardware engineering
• You should be familiar with the various power topologies and design considerations
• You will be frequently required to travel for business.
• You should be good at on-site problem identification and rectifying.
• Hands-on independent problem solver
• Possess knowledge on power conversion systems, like AC/DC Inverters, AC-DC chargers and DC/DC converters, UPS, Battery management System (BMS) and Energy Management System (EMS)
• Proficient in Microsoft Word, PowerPoint and Excel

Perks of Joining VFT:

• Competitive Salary Package.
• Vibrant Environment & Company Culture.
• Medical & Hospitalization Insurance.
• Performance-based Variable Bonus.
• Comprehensive Leave Package.
• Convince us with your skills & strengths and we promise you progressive personal & career development opportunities with our leading-edge technologies and industry know-how.

Why Join VFT:

• We offer exciting work in a fast-growing technology start-up. Our company is situated in Singapore (heart of Asia) with one of the finest infrastructure & low personal income tax rates.
• We offer our employees excellent working conditions, and numerous opportunities for development.
• Our team is diverse, multi-cultural and shares the drive to make a difference and create change.
• We encourage our team to bring in their ideas and take initiatives that make them proud of.
• We foster a rapidly scaling working environment with a very entrepreneurial, innovative, and collaborative culture.
• We see the opportunities, where others see problems

Equal Opportunity Employer Motto:

VFlowTech is an equal opportunity employer. All qualified applicants for employment with VFlowTech will receive consideration for employment without regard to race, sex, age, colour, religion, marital status, sexual orientation, gender identity, veteran status, status with regard to public assistance, source of income, national origin, citizenship status, disability, or any protected status

Cyclect, a leading energy solutions provider, is seeking a talented and motivated Project Engineer to join our esteemed team. With a focus on power generation, heat recovery, and resource recovery, as well as new sustainable energy technologies like hydrogen and fuel cells, we are committed to revolutionizing the energy landscape. Join us in shaping a sustainable future.

Responsibilities:

· Utilize your expertise in thermodynamic engineering calculations to support the design and optimization of power generation, heat recovery, and resource recovery systems.

· Assist in the preparation and support of proposals and bids for energy-related projects, showcasing your understanding of industry requirements and best practices.

· Take on project management responsibilities for energy initiatives, including power generation, heat recovery, and waste recovery, ensuring successful execution within defined timelines and budgets.

· Collaborate closely with cross-functional teams, including engineers, technicians, and clients, to ensure seamless integration and exceptional project outcomes.

· Stay up-to-date with advancements in sustainable energy technologies, particularly in hydrogen and fuel cells, and contribute to their integration into our energy solutions.

Requirements:

· Bachelor's degree in Thermodynamics, Mechanical Engineering, or a related field. Advanced degrees will be considered an advantage.

· Proficiency in thermodynamic engineering calculations, with a strong understanding of various power generation, energy recovery and new energy technologies

· Proven experience in preparing, reviewing, and supporting proposals and bids for energy-related projects.

· Strong project management skills, demonstrating the ability to coordinate and oversee energy initiatives effectively.

· Familiarity with sustainable energy technologies, particularly in hydrogen generation and fuel cells, is highly desirable.

· Excellent analytical and problem-solving abilities, with meticulous attention to detail.

· Outstanding communication and interpersonal skills to engage and collaborate with stakeholders at all levels.

Why join us?

· Be part of a renowned energy solutions provider, driving innovation and sustainability in the industry.

· Engage in exciting projects involving power generation, heat recovery, and resource recovery, while exploring new sustainable energy technologies.

· Join a collaborative and diverse work environment that fosters professional growth and development.

· Competitive salary package, performance incentives, and comprehensive benefits.

If you are a highly motivated Project Engineer with expertise in thermodynamics, power generation, heat recovery, and a keen interest in existing and new sustainable energy technologies, we invite you to apply. Join our team at Cyclect and be instrumental in shaping a greener future.

Responsibilities:

• Render all M&E Engineering support to the M&E Manager/Project Manager/Planning Manager for the successful execution of the project.
• Liaise and coordinate with clients, consultants, consultant representative (RE/RTO), relevant authorities and sub-contractors on M&E issues and challenges.
• Coordinate with all M&E subcontractors, as well as project team structural and architectural colleagues to resolve all drawings, site discrepancy or technical issues.
• Attend all project meetings and progress meetings relating to meeting master program schedule.
• Ensure good M&E drawing management and the control of M&E documentation/filing on site.
• Ensure timely production and submission of M&E shop drawings, materials submission and method statements. All M&E shop drawings, materials and method statement are to be approved before use.
• Ensure all M&E site activities are well-planned, well-coordinated and on time.
• Oversee and guide all M&E staff/Supervisors/sub-contractors, ensuring work is carried out in accordance with the approved shop drawings, materials and method statements.
• Prepare accurate and comprehensive M&E progress report when required.
• Arrange for all M&E T&C works.
• Work with Consultants to come out with proper site inspection schedule to be carried out by the relevant government authorities.
• Work closely with EHS Department to ensure strict compliance of safety regulations.

Requirements:

• Degree in Mechanical/Electrical Engineering or related disciplines.
• Minimum 3 years’ experience for Main Contractor in project management and/ or site coordination works for building or civil projects.
• A team player and able to communicate well with all level.

• Maintain confidentiality throughout the process of tender
• Review of tender documents and identify customer requirements
• Co-ordinate all inter-department inputs for inclusion in tender submission and for cost preparation
• Preparation of technical and commercial clarification post review of tender documents
• Identify third party / subcontract scope of services and get proposals from suitable vendors / subcontractors.
• Technical and commercial evaluation of third-party proposal and negotiation.
• Prepare cost estimates for assigned project tender and risk review
• Prepare technical and commercial proposals for submission

REquirement:

• Diploma/Degree in Chemicals, Electrical/Electronic Engineering or instrumentation
• know Process and Instrumentation technical knowledge
• Good skill sets of MS excel/words/Power Points
• It will be advantage to have some Customer service handling experiences

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Apply Now” or aliceyap(a)hkmsvs.com

All applications will be treated in the strictest confidence and only shortlisted candidates will be notified

Yap Lay Choo

EA Licence No. 03C5391 | Registration No. R1987101

There is an immediate vacancy for a Process Engineer to work on projects in the Pharmaceutical and Biopharmaceutical sectors.

Key responsibilities (but not limited to):

• Design of process and utilities – preparation of PFDs, P&IDs, equipment sizing calculations
• Coordination of design with other design disciplines and equipment suppliers
• Ownership of equipment modules and packages through design and procurement phases
• Completion of Design Risk Assessments
• Participation in Technical and Safety reviews
• Interfacing with client design team/end users
• Process optimization/site support

Key Requirements:

• Degree in Chemical/Process Engineering (or equivalent)
• Min 5 years of design experience in the Pharmaceutical and Biopharmaceutical sector.

What you can expect:

• The opportunity to work on a range of projects, from conceptual stage through to detailed design, commissioning and qualification.
• Career enhancement due to the wide scope of the projects and experience you will receive.
• Work closely with Industry leading Engineers

To apply, you may forward your resume to: [email protected]

Job Responsibilities

• Report to the Engineering / SHEQ Manager of Coim Asia Pacific Pte Ltd, for all project, operational and maintenance matters.
• Execute CAPEX or improvement projects, especially in the fields of project management including preparing scope of works, procurement, construction, installation, start-up and commissioning.
• Ensure proper communication, procedure and workflow to all project stake holders.
• Maintain and update engineering documentation including maintenance procedures & work records, inspection reports, AutoCAD drawings etc.
• Liaise and coordinate with external service providers to ensure the safety, quality and value of work performed within the site.
• Provide specialist support to Maintenance engineer in relation to plant & facility maintenance activities safely, efficiently and effectively such as:

- Establishing maintenance programs and strategies related to E&I equipment for process plant and utilities.

- Troubleshoot equipment problems to minimize equipment downtime.

- Provide practical and cost-effective solutions to all E&I related issues or problems.

- Inventory Spares

• Upkeep of ISO 9001, 14001, 18001 and SS 651:2019 standard requirements.
• Continually source for reliable and competitive equipment suppliers and project contractors.
• Monitor plant equipment performance and identify areas for improvement.
• Network with counterpart in sister sites on equipment history/ troubleshooting techniques and proven best practices.
• Develop and implement Electrical Safety best practices and ensure 100% compliance to relevant regulations.
• Actively participate and contribute in safety studies such as HAZOP, EHA, Area Classification, facility siting etc. and implement recommendations arising out.

Job Requirements

• Candidate must possess at least Bachelor's Degree in Electrical Engineering or equivalent.
• At least 5 to 10 years relevant working experiences in petrochemical, chemical or pharmaceutical industries.
• Possess good technical knowledge in Electrical and Instrumentation including PLCs.
• Competent in planning and scheduling plant maintenance and engineering project activities.
• Multitasking and able to work with minimal supervision.
• Strong communication and interpersonal skills. Able to work effectively with inter- and cross-functional teams.
• Good team player and willing to collaborate with different departments to achieve common goals
• SCEM certification would be an added advantage.
• Highly ethical and able to align towards the organization’s goals.

Responsibilities:

• Extract bill of quantities for steel reinforcements from project's structural drawings
• Scheduling and drafting of technical drawings for submission and production
• Coordinate with project's site personnel on all technical matters
• Attend site discussion as and when necessary

Requirements:

• Min Diploma in Structural/Civil Engineering or QS or similar discipline
• Proficient in AutoCad
• Responsible, self-motivated and good interpersonal skill
• Minimum 1 year of work experience in similar field
• Detailed oriented and accuracy in calculations

Job Responsibilities

• To carry out electrical / instrumentation related detailed design and preparation of drawing.
• To interpret and develop P&ID, technical data sheet preparation and I/O wiring diagram, design of electrical systems.
• To carry out electrical/instrumentation calculation for the design.
• Responsible for reviewing of electrical/instrumentation documents and specification from clients and consultants.
• To check and review all electrical/instrumentation related drawings and documents from suppliers and vendors.
• To liaise with clients, consultants, sub-contractors to resolve technical issue at site and in office.
• To co-ordinate with engineers of other disciplines within the department.
• To prepare Pre-procurement including evaluation of technical and commercial bid from vendor and supplier.
• To provide engineering support in tendering of new projects such as preliminary design, material and cost estimates etc.
• To provide technical support to project team for on-going projects and resolve any technical issue on site.

Job Requirements

• Degree in Electrical Engineering
• Minimum 5 years’ experience in Construction Management and/or Design of Electrical Systems.
• Proficient in Design and drafting of LV and HV systems.
• Familiar with Electrical Installation works and local electrical codes and standards.
• Knowledge of SCADA, PLC and other instrumentation systems will be an advantage
• Experience in Oil and Gas or Power Plant projects specializing in Engineering- Electrical / Instrument work.

Job Description:

• Design FA project inclusive of tooling, artwork, material and process.
• Draft drawing for making of tooling and artwork.
• Liaise with suppliers regarding the making of tooling and artwork.
• Co-ordinate FA run with FA Report Submission.
• Co-ordinate product transfer from US to Singapore facility.
• Develop and fabricate test jig/ tool for testing of functionality of finish product.
• Perform product failure analysis, as well as reduce cost through yield improvement, cycle time reduction and process enhancement.
• Coordinate the Engineering Change Notice (ECN) process.
• Preparing RFQ.

Requirements:

• Bachelor Degree in Electrical/ Electronics/ Mechanical Engineering or equivalent
• Proficient in software such as AutoCAD, Adobe Acrobat, Photoshop, Illustrator, Microsoft Office Applications, Microsoft Office.
• Excellent driver, team leader and team player, interpersonal and communication skill, strong ability on communication, Excellent analytical skills.
• Able to work under pressure with minimum supervision.
• Must be a self-motivated team player with good presentation and communication skills.
• Good project and time management capabilities.
• Fresh graduates are welcome, training provided.

Interested candidates please send Resume in Ms Word format with full Certificate to [email protected]. Regret only shortlisted candidate will be contacted.

About the role

This position is for a Supplier Quality Engineer, who lead and collaborate to drive quality performance that improves business results. Steward supplier qualification / certification, assessment, statistical monitoring, escape management, and quality issue resolution processes with knowledge and explanations of Supplier Quality & Compliance practices and procedures to uphold solid quality management system.

Key Responsibilities:

As a Supplier Quality Engineer, you’ll be responsible for:

• Stewards supplier qualification / certification, assessment, statistical monitoring, escape management, and quality issue resolution processes to uphold solid quality management system.
• Reviews and makes recommendations on quality data and drives development of part / supplier specific quality issue resolution to uphold excellent product quality.
• Drives root cause analysis & problem solving (Red-X & 8D) in escape management procedures. Makes recommendations to systemic improvements over product and process design or control of suppliers for robust DFMEA and/or PFMEA .
• Executes processes and procedures for supplier qualification / certification, source inspection and material release processes, Production Part Approval Process (PPAP) acceptance, and Corrective Action Boards / Quality Clinics with suppliers.
• Ensure supplier is capable to meet all requirements for process change management as well as any other applicable projects.
• Align activities to support Carrier Supplier Excellence program to ensure sustainable continuous improvement.
• Develops and executes action plans that drive quality performance and improve business results.
• Develops supplier quality strategies and to collaborate with others to improve supplier quality performances.

Requirements

We are looking for people who possesses excellent communication skills and has good stakeholder management. If this is you, get in touch.

As a minimum you must have:

• Minimum Degree in Mechanical, Electrical Engineering or any related fields.
• ​A minimum of 5 years prior relevant experience OR an advanced degree in a related field and a minimum of 3 years experience.
• knowledge in ISO, APQP, PPAP & SPC preferred.
• Good communication and interpersonal skills.

Job Responsibilities

• Coordinate Mechanical and Electrical services with consultant and sub-contractors on site.
• Oversee all related M&E issues on site.
• Assists Manager in the co-ordination of project management activities.
• Attends external project meetings, meetings with consultants as well as technical and co-ordination meetings, daily project meetings and internal project closure meeting.
• Assists Manager in carrying out all shop drawings and submission with Drafting Department.
• Ensures the adherence to the Safe work procedure (SWP).
• Ensures the timely preparation of project progress and other reports.
• Follows up on all aspects of QA/QC matters; records all defects works and ensure proper documentation.
• Orders materials required for projects.

Job Requirements

• Degree in electrical/mechanical/electronics engineering or relevant qualification.
• Minimum 5 years of engineering experience with recognized Degree in relevant field, and at least 3 years of supervision experience of E&M work in construction site for projects of similar and complexity.
• Strong analytical and problem-solving skills.
• Good communication and interpersonal skills.

• Supervise projects onsit ensuring work adhere to safety regulations, work schedule and progress and quality.
• Monitoring and reporting of work progress.
• Able to coordinate with workers and other Contractors on site.
• Ability to resolve technical and engineering problems.
• Providing technical advice and suggestions for improvement on projects.
• Excellent at reading and understanding construction detail, plan and elevation drawings
• Ensure all project documentation (progress reports, progress claims, daily reports, site diary, QA/QC report etc.) are submitted and follow up to ensure collectionof approved documents in a timely manner.
• Any Ad-hoc duties assigned.

Job Requirements

• Bachelor of Degree / Diploma in Civil Engineering
• Possess high level of initiative, strong interpersonal and

communication skills

Experienced in Civil Engineering related field is added advantage

• At least 6 years of working experience in the related field.
• Good communication, self –initiative and interpersonal skill.
• Candidates with experience will be considered for senior role.
• Have to work on weekend (Saturday and Sunday ) if site need .

Job Overview:

The ideal candidate will possess strong technical expertise in piping design and a deep understanding of international standards and practices. If you are passionate about delivering high-quality engineering solutions and thrive in a collaborative environment, we want to hear from you.

Essential Duties & Responsibilities:

• Perform piping design and pipe support design.
• Interpret and develop the pipe routing from PFD & P&ID, plant layout, and piping material specification.
• Apply international standard and practices such as ASME, ANSI code. Familiar with pipe / tank specifications, nozzle specifications and orientation of nozzles.
• Perform Material Take Off (MTO) from piping drawings. Generate the ISO drawings.
• Assist modeler in piping and equipment 3D modeling as per project specification and best engineering practices.
• Perform pipe stress analysis and surge analysis (not mandatory)
• Responsible for reviewing of piping/mechanical documents and specification from clients and consultants.
• Responsible for review and check of all piping/mechanical documents and drawings from vendors and suppliers.
• Prepare technical datasheet and specification.
• Co-ordinate with engineers of either disciplines within the department.
• Liaise with clients, consultants, sub-contractors to resolve technical issue at site or in office.
• Lead and interface within inter-disciplines for all technical matters.
• Pre-procurement preparation including evaluation of technical and commercial bid from vendor and supplier.
• To provide engineering support in tendering of new project such as preliminary design, material and cost estimates etc.
• Provide technical support to project team for on-going projects and resolve any technical issue on site..

Skills Required

• Understanding and development of various piping and fitting specification.
• Model Review Software (Navisworks) skills is required.
• Familiarity with BIM Revit modeling will be added advantage.
• Familiarity with PP, PVC, CPVP, and FRP piping and fittings will be added advantage.
• Familiarity with Face piping Skid, and equipment skid piping (such as RO, UF, CEDI, UV) will be added advantage.
• Ability to read and interpret ISO/GA/P&ID drawings.

Job Overview:

The ideal candidate will possess strong technical expertise in piping design and a deep understanding of international standards and practices. If you are passionate about delivering high-quality engineering solutions and thrive in a collaborative environment, we want to hear from you.

Essential Duties & Responsibilities:

• Perform piping design and pipe support design.
• Interpret and develop the pipe routing from PFD & P&ID, plant layout, and piping material specification.
• Apply international standard and practices such as ASME, ANSI code. Familiar with pipe / tank specifications, nozzle specifications and orientation of nozzles.
• Perform Material Take Off (MTO) from piping drawings. Generate the ISO drawings.
• Assist modeler in piping and equipment 3D modeling as per project specification and best engineering practices.
• Perform pipe stress analysis and surge analysis (not mandatory)
• Responsible for reviewing of piping/mechanical documents and specification from clients and consultants.
• Responsible for review and check of all piping/mechanical documents and drawings from vendors and suppliers.
• Prepare technical datasheet and specification.
• Co-ordinate with engineers of either disciplines within the department.
• Liaise with clients, consultants, sub-contractors to resolve technical issue at site or in office.
• Lead and interface within inter-disciplines for all technical matters.
• Pre-procurement preparation including evaluation of technical and commercial bid from vendor and supplier.
• To provide engineering support in tendering of new project such as preliminary design, material and cost estimates etc.
• Provide technical support to project team for on-going projects and resolve any technical issue on site..

Skills Required

• Understanding and development of various piping and fitting specification.
• Model Review Software (Navisworks) skills is required.
• Familiarity with BIM Revit modeling will be added advantage.
• Familiarity with PP, PVC, CPVP, and FRP piping and fittings will be added advantage.
• Familiarity with Face piping Skid, and equipment skid piping (such as RO, UF, CEDI, UV) will be added advantage.
• Ability to read and interpret ISO/GA/P&ID drawings.

The Earth Observatory of Singapore (EOS) is a research institute at the Nanyang Technological University (NTU) of Singapore. Its mission is to conduct fundamental research on earthquakes, volcanic eruptions, tsunami and climate change in and around Southeast Asia, toward safer and more sustainable societies. The Centre for Geohazard Observations (CGO) of EOS provides technical and research support to the observatory. It installs, maintain and manages the observatory’s geophysical and other field instrumentation stations spread over several countries in the region.

The Senior Research Engineer is to enable the research conducted by EOS by providing effective technical and technological solutions in installing, maintaining and managing the various geohazard observation stations, and conducting field surveys. The purpose is to measure and collect quality field data necessary for the tectonic, volcanic and climate related research of the observatory.

Key Responsibilities:

• Design, install and maintain geohazard observation stations and networks in and round Southeast Asia that collect geophysical, geodetic and geochemical data for research. The stations include but not limited to Global Navigation Satellite System (GNSS) station, seismic station, volcano observation stations, infrasound network and environmental observation station.
• Design, install and maintain technical systems, such as the power system, radio/telemetry system, data networking system, fault monitoring system for the geohazard observation stations.
• Plan, organise, conduct local and overseas fieldwork for the installation, maintenance and rectification of the geohazard observation stations.
• Plan, organise and conduct geophysical field measurements using modern surveying equipment.
• Monitor the operational status of the geohazard observation stations remotely, devise fault rectification plan and rectify remotely where possible.
• Coordinate with collaborators for the conduct of installation and maintenance fieldwork.
• Perform data quality check and basic data processing.

Job Requirements:

• Bachelor’s degree in engineering or related fields with 8 years of relevant working experience, or
• Master’s degree in engineering or related fields with 6 years of relevant working experience.
• Experience and knowledge in GNSS data processing using GAMIT/GLOBK or similar software.
• Experience and knowledge in computing languages such Python and bash scripting.
• Experience and knowledge in Data Networking/Telemetry.
• Experience and knowledge in the electrical domain.
• Experience in conducting fieldwork at remote locations.
• Evidence of being a strong team player.
• Evidence of technical or technological resourcefulness and inventiveness.
• Experience in earth, climate or environmental science related fieldwork in Southeast Asia region is an advantage.

We regret to inform that only shortlisted candidates will be notified.

The Planning Engineer develops & updates the Project Programmes, conducts relevant research, data analysis and coordinates with different disciplines to support the Senior Planning Engineer and Planning Manager in the planning and execution of Projects.

He/She has good understanding of an overall Project life cycle and it is proficient in the usage of Planning software such as Primavera 6.

Manage and control construction schedule

Updates revisions of the Master Programme/Schedule and other planning/ control documents to include planned work, actual progress, revised activities, revised sequence, additional works and additional time

Monitor resources, progress of the works and compile records

Prepares the daily, weekly and monthly manpower and equipment report for timely submission to the Client.

Issue regular progress and planning updates to Construction, Engineering and Contract teams

Compiles, prepares, submits and maintains the Monthly Progress Report.

Maintains the Monthly Progress Site Photographs/ Videos for record

Perform delay analysis and mitigate deviations

Carry out analyses of progress and identify delays and their impact

Monitor work progress against schedule

Prepare recovery programmes

Prepare substantiation records and summaries for excusable delays

Requirements:

· Candidate must possess at least a Bachelor’s Degree in Civil Engineering from a recognized University

· Minimum 5 years of relevant experience in Civil and Building projects.

· Excellent verbal and written communication skills.

· Good knowledge of construction methodologies and construction sequencing

• Ensure to know project scope of works and meet the clients needs as per project standard and requirements.
• Supervise and oversee the sequential activities of Structural, Piping & Mechanical Equipment (SMP) Installation such as Receiving, Locating in the lay down, Preservation,Foundation and Structure, Receiving from Main Contractor/Suppliers/Vendors,Pipe Support Installation, Launching, Fitting and Welding of piping, Flange Alignment, Punch Clearing, Reinstatement,Touch up Painting and Hand Over.
• Must have working knowledge of all applicable piping and structure standards and recommended practices, e.g. BS, ASME,ASTM,CSA,API etc.
• Managing project scope and change control with commerical or without commercial impact.
• Development of procedures, flowchart or process flow, detailed calculation based on available Engineering information.
• To procure and requisition materials based on interpret construction and technical drawings.
• Communicate with Engineering/technical/quality requirement to team individuals.
• Project Coordinate with Clients, PMD, Procurement, Engineering, Contract & Finance Departments & Subcontractors and interfaces with other REL' s Business Units.
• Working closely with main contractor and client to ensure the project meets the required needs.
• Resolve any unexpected technical difficulties for SMP scope and other problems that may arise at any time.
• Oversee the Steel Structural Works, Piping and Mechanical while assist and communicate for any prioritise from Pre-Fabrication required (e.g PTREI and Subcontractors)
• Preparation of method of statement, risk assessments for Piping, Mechanical & Steel Structure Scopes.
• Monitoring and installation supervision with subordinates to deliver the projects in Safety, Quality and Production manners.
• To liaise with clients representative on all project issues and subcontractors to ensure safe and efficient delivery of projects to both the company and clients satisfaction.
• Leading the supervisors and foremen in finding and executing solutions to SMP related problems on site.
• Communicating with Project Management Team / QAQC Team to validate and document all changes and highlight to PM for changes that shall involve additional works.
• Assist with the management of internal and external third party interfaces.

Requirements

• Diploma or Degree in Electrical and Instrumentation
• Min 3 to 5 years work experience as Electrical Project Engineer in Oil and Petrochemical Construction Industry
• Experience in project co-ordination with client, engineering and procurement departments
• Experience in co-ordinating with site construction team for installation, testing and commissioning works
• Preferably with overseas experience
• *FRESH GRADUATES ENCOURAGE TO APPLY*

Responsibilities:

• Leads / co-leads a group of supervisors, job leaders, workforce for the maintenance works
• Studies repair requirements as defined in the specifications, inspects jobs at site and clarifies requirements
• Delegates jobs to supervisors and plans the manpower required for the jobs in accordance to the budgeted man-hours
• Monitors and inspects the work of sub-contractors and yardmen to ensure that quality and workmanship conform to company standards
• Tracks, monitors and reports daily work progress to the Section Manager / Assistant Section Manager
• Monitors and tracks the overall department Preventive Maintenance Program (PMP)
• Assists the Section Manager / Assistant Section Manager in preparing the Yearly Work Plan for Preventive Maintenance Program (PMP)
• Raises or approves PR / PO for materials and equipment required for the jobs accordingly
• Performs admin works for daily section reporting and updating of systems (E-invoice, Utilities, Manpower, Equipment Rental, Contracts, Costing, DRR, etc)
• Monitors the Section Government Related License, Insurance and Payment Tracking (EMA, MPA, LTA, JTC, SLA, SP Group, etc)
• Collects and maintains CAPEX and OPEX Assets Management in the Yearly Work Plan (Memo, Proposal, Circulation & Monitoring)
• Ensures correct documentation and reports done to comply for ABMS Audit

Requirements:

• Bachelor’s degree in Mechanical Engineering/ Marine Engineering or related engineering disciplines
• Entry Level candidates are welcome to apply (On Job Training will be provided)
• Excellent proficiency in English (written and spoken)
• Good in planning, organizing, and interpersonal skills and able to work independently

Working hours & locations:

(Tuas Yard)

Pioneer Sector 1, Singapore 628437

(Islandwide transport provided)

Mon - Thur: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte. Ltd. and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

ESSENTIAL DUTIES & RESPONSIBILITIES:

In collaboration and alignment with Corporate Engineering, Project Management, Procurement:

· Conduct Field Engineering during the piloting, construction, commissioning and operation/maintenance/DLP/after sale phases of Gradiant’s Projects in Singapore and overseas with minimal supervision.

· Provide technical and hands-on support for the implementation of pilot studies and commercial operations (e.g. process adjustments, chemical preparation, preventive maintenance activities, corrective maintenance, instrument calibration, membrane cleaning, troubleshooting, process optimization) as directed by Gradiant Operations and Process Engineering Managers.

· Manage Gradiant and/or its partners’ site operators in implementing good practices for plant operations and maintenance and daily operational activities through preparation and implementation of standard operating procedures (SOPs) and technical training.

· Support the development, establishment, and maintenance of plant performance monitoring, reporting and improvement.

· Proactively report and investigate plant performance/reliability issues and propose practical and cost-effective solutions.

· Coordinate and oversee the relevant technical support to the operating sites, as to reduce unplanned downtime through failure analysis and corrective actions implementation.

· Support the preparation of the predictive and preventive maintenance programs at operating sites and closely monitor their performance.

· Participate in technical meetings related to Gradiant projects being executed and potential project opportunities as Gradiant’s local representative.

· Promote and support Gradiant after sales services, including spare parts, consumables, ad hoc operational and site technical support. Work closely with Engineering and Procurement departments to correctly specify and source materials and services.

· Positively promote a safe and healthy work environment and employ safe work practices at all times, including documenting incidents and recommending and following through on corrective actions.

· Monitor compliance with contractual and regulatory requirements.

· Maintain efficient communication and information sharing between the Operations Department and Engineering/NPI Departments including writing and issuing technical reports and Return of Experience/Lessons Learned reports.

· Carry out other duties as may be assigned from time to time by your supervisor.

SKILLS/EXPERIENCE/EDUCATION REQUIRED:

• Candidate must possess at least formal trade qualifications. Bachelor's Degree/Post Graduate Diploma/Professional Degree in Environmental, Chemical, or Mechanical Engineering is desirable.

• At least 8 year(s) of experience in Commissioning and/or in Operations and Maintenance in the water industry is required for this position.

• Familiar with various water and wastewater technologies

• Proficient in Microsoft Office Suite

• Excellent analytical thinking, interpersonal/communication skills, writing and problem-solving capacities

• Reliable, well organized, and detail-oriented

• Fluency in English

• Applicants must be willing to travel as and when required (up to, and sometimes exceeding, 50%)

• Familiarization with mechanical,electrical,Instrumentation and Controls of process plants

• Commissioning activities like SAT/FAT,instruments,valves and controls loop check

JOB SPECIFICS:

• Ability to work in a high energy, start-up based environment.

• Strong communication skills to convey ideas and technical information effectively with team and customers.

• Excellent customer orientation, willingness to deal with people, be flexible and be able to meet customer demands

• Curiosity and strong drive to improve status-quo while working in a semi-autonomous environment.

• Pays attention to detail, identifies & solves complex issues.

• Checks work for quality.

• Shares suggestions to improve quality & productivity.

• Works independently with minimal supervision.

Job Duties & Responsibilities:-

- Overseeing the procurement of materials.

- Coordinating with the various clients , consultants, main-contractors , architects, sub contractors and specialist to ensure the smooth and timely execution of the project deliverables.

- Ensuring that all works are carried out in accordance with the project specifications.

- Ensuring that all works are carried out within the project budget given.

- Overseeing the various design elements of the project.

- Providing timely submissions for cash flow and progress claims.

- Procurement of materials and ensuring the timely delivery of the materials as per site requirement.

- Ensuring that all team members can deliver their daily works and that the team meets the project requirements.

- Monitoring and improving of overall project progress to meet critical milestone dates.

- Submission of monthly / weekly progress and safety reports.

- Reporting of all project matters to the management.

- Preparing and presenting of consolidated contractual claims to the client representives.

- Any other works/tasks given by the Management for the completion of the project and other Ad-hoc assignments.

Work location : at site

Mon-Fri : 08:30am - 5.30pm, Sat : 8.30am - 12.30pm (Alternate Sat)

Salary shall be commensurate with experience .

Candidates are requested to indicate the level of remuneration desired.

The Earth Observatory of Singapore (EOS) is a research institute at the Nanyang Technological University (NTU) of Singapore. Its mission is to conduct fundamental research on earthquakes, volcanic eruptions, tsunami and climate change in and around Southeast Asia, toward safer and more sustainable societies. The Centre for Geohazard Observations (CGO) of EOS provides technical and research support to the observatory. It installs, maintain and manages the observatory’s geophysical and other field instrumentation stations spread over several countries in the region.

The Research Engineer is to enable the research conducted by EOS by providing effective technical and technological solutions in installing, maintaining and managing the various geohazard observation stations, and conducting field surveys. The purpose is to measure and collect quality field data necessary for the tectonic, volcanic and climate related research of the observatory.

Key Responsibilities:

• Design, install and maintain geohazard observation stations and networks in and round Southeast Asia that collect geophysical, geodetic and geochemical data for research. The stations include but not limited to Global Navigation Satellite System (GNSS) station, seismic station, volcano observation stations, infrasound network and environmental observation station.
• Design, install and maintain technical systems, such as the power system, radio/telemetry system, data networking system for the geohazard observation stations.
• Plan, organise, conduct local and overseas fieldwork for the installation, maintenance and rectification of the geohazard observation stations.
• Plan, organise and conduct geophysical field measurements using modern surveying equipment.
• Monitor the operational status of the geohazard observation stations remotely.
• Coordinate with collaborators for the conduct of installation and maintenance fieldwork.
• Perform data quality check and basic data processing.

Job Requirements:

• Bachelor’s degree in engineering or related fields with relevant working experience, or
• Master’s degree in engineering or related fields.
• Experience and knowledge in GNSS data processing using GAMIT/GLOBK or similar software.
• Experience and knowledge in computing languages such Python and bash scripting.
• Experience and knowledge in data networking/telemetry and electrical domain.
• Experience and knowledge in operating survey equipment such RTK GNSS instrument, LiDAR scanner, total station, level instrument or similar.
• Evidence of being a strong team player.
• Evidence of technical or technological resourcefulness and inventiveness.
• Experience and knowledge in LiDAR data processing using LiDAR Mapping Suite, POSPac, CloudCompare or similar software will be an advantage.
• Experience in earth, climate or environmental science related fieldwork in Southeast Asia region is an advantage.

We regret to inform that only shortlisted candidates will be notified.

Responsible on implementing and commissioning company products

Providing training and necessary support to customers

Assist in Pre- Sales activity

Good interpersonal skill

Good knowledge in IT services is an advantage

Willing to learn

Able to work with other teams

Able to work independently with good working attitude

Job Role:

• As the Software Engineer – Automation/Embedded System Firmware, you will serve as an expert in the domain of robotics automation engineering, PLC programming and be involved in embedded system firmware development.
• Your responsibilities will encompass the entire development lifecycle, from requirement definition and conceptualization to commissioning and troubleshooting, both on-site and remotely.
• In addition, you will function as the architect for our existing product and software, collaboratively contributing to the development of cutting-edge robotic and machine prototypes and simulations. Collaboration with the Operations Team during commissioning processes is an integral aspect of this role.

Responsibilities:

• Robotics Engineering: Your duties will involve programming articulated robots, engaging with physical robots and their simulation, and utilizing various robot simulation tools to create multi-robot trajectories.
• Code Development: You will be responsible for programming and parameterizing PLCs for our machines and robots, utilizing programming languages such as ST and Ladder Logic. Close collaboration with motion design and control for industrial drives and servos is expected. You will also be responsible for developing embedded firmware based on project requirements on our custom hardware system.
• Testing and Product Development: Your role will include the development of bug fixes and new automation projects, as well as active participation in the development, implementation, and testing of new product prototypes.
• Commissioning and Troubleshooting: As a proactive team player role, you will coordinate all automation-related commissioning and PLC tasks at customer locations. For the firmware portion, you will need to work with teammates from other disciplines on system bring-up and design validation.
• Communication and Connection: Creating communication pathways to online or edge devices using EtherCAT, OPC, Eip, Modbus, Modbus/TCP, and socket connections. Besides that, you also will deal with other embedded system-related protocols such as SPI, I2C, CAN Bus and Modbus/RTU.

Requirements:

• 2 to 3 years of professional experience in a similar role, preferably within a product-focused automation or robotics company.
• Demonstrated proficiency in programming articulated robots, with a preference for experience with ABB robots and robot simulation using Robot studio.
• Understanding of robot coordinates.
• PLC, HMI programming experience ideally Beckhoff, twincat 3.
• Strong grasp of Object-Oriented Programming (OOP) concepts.
• Hold an academic degree in Automation, Electrical, Mechatronics, or an equivalent field of study.
• Familiar with STM32 family controller and RTOS is a plus.
• Able to understand electronic schematics.

We regret that only shortlisted applicants will be notified.

We are looking for a Generative AI Innovation engineer with keen interest in nation-wide initiatives.

• Be a part of the innovation team from a leading industry of Singapore's GDP.
• Attractive Remuneration Package.
• Hybrid work arrangement.

Responsibilities:

• Be the expert on the latest advancements in GenAI and apply such knowledge to shape organization’s strategy for GenAI.
• Scope GenAI projects based on problem statements from internal and/or external stakeholders, ideally through an application of design thinking practices.
• Deploy Python-based AI/ML frameworks, specifically PyTorch, TensorFlow and scikit-learn, and latest frameworks/tools for GenAI such as Langchain for POCs developed.
• Develop and maintain clear and concise documentation of GenAI models, processes, and results.
• Optimise model performance through experimentation, hyperparameter tuning, and advanced optimisation techniques.

Requirements:

• Degree in Computer Science or equivalent.
• Experienced in developing AI/ML solutions in a corporate or research setting, deployed solutions into production.
• Strong programming skills in Python/Java/Javascript and full stack development.
• Aptitude for data story-telling, visualisation and technical communications. Able to abstract and convey technical concepts to non-technical audiences well.
• Team player with a keen interest in mentoring and collaborative problem-solving.

Interested candidates may apply via email to [email protected] (indicating Job ID J44098 for faster processing). All job applications will be processed with strict confidence and only shortlisted candidates will be contacted.

Lee Wen Ying (Mattias) - R23112909

ScienTec Consulting Pte Ltd - 11C5781