Principal Responsibilities

• Support for the Operational readiness of the new plant (including walkdowns & punch listing, pre-commissioning, and commissioning activities, preparing SOPs & routine schedules etc.)
• Planning and Execution of all Equipment (Rotating) Preventive Maintenance and Corrective Maintenance .
• Review all documents available in GDMS and work with LE to prepare equipment BOM and upload into SAP system.
• Condition Monitoring of Rotating Equipment through Online and Offline Vibration Analysis, Oil Analysis and other techniques.
• Planning, execution and monitoring of contractor routine and non-routine maintenance activities and perform troubleshooting or provide guidance where issues arise.
• Planning and coordination of shutdown maintenance activities of Rotating Equipment based on local and Global PM requirements, Vendor recommendation & Industrial Best practices.
• Review risk analysis and maintenance procedures on regular basis.
• Upkeep maintenance records for equipment modifications, repair and rerating on regular basis
• Identify and update discrepancies in plant equipment records or on field.
• Participate in the root cause analysis (RCA) on process incidents and process inducted mechanical failures, recommend corrective actions to permanently eliminate them and follow up on closure of the actions.
• Initiate the Engineering Management of Change (EMOC) and execute the changes for plant improvement and modification works.
• Facing External / Internal Audit and closing of the actions within given time limit.
• Identifying bad actors in the plant and reliability improvement by implementing short term and long term solutions.

Required Qualifications/Experience

• Degree in Mechanical Engineering with at least 7 years’ of maintenance experience in Oil & Gas / Petrochemical industry or Diploma holder with 10 years’ maintenance experience Oil & Gas / Petrochemical industry preferred.
• Experience in a Gas Plant such as Gasification/SMR/ASU is an advantage.
• Good conceptual knowledge on design and maintenance of all Rotating Equipment such as Steam Turbine, Centrifugal Compressors, Reciprocating Compressors, Screw Compressors, Multistage Pumps etc.
• Good conceptual knowledge of Industrial standards such as API, ASME etc for Rotating & associated Static Equipment.

Responsibilities

• Support customer environment to ensure continuous operation
• Daily operational task for stock taking/health check on existing equipment
• Software patching for workstations and servers on premise
• Prepare endpoints for exercise
• Handle maintenance requests such as new version, Upgrade, Patch and Scripts.
• Troubleshooting and maintenance of existing infrastructure
• Able to review and provide recommendation on current infrastructure/ process

Requirements

• Preferred candidate with self-motivation to learn new technology
• Preferred with some experience in Operating System, Microsoft/ UNIX/ LINUX/ Red Hat and administration in OS imaging, MDT, and Task sequence troubleshooting.
• Preferred candidate skilled in IT Infrastructure Operation and/or Support (LAN/WAN/Systems)
• Required candidate to be minimum CCNA (Cisco Certified Network Associate) certified.

Reporting Location

• West Army Camp

About our company

We are a leading engineering and construction company based in Singapore. With multifaceted project management capabilities and a strong diverse workforce, we provide a full range of services in engineering, procurement, construction and maintenance of power and industrial plants across the world.

Responsibilities

• Implement established project plan; monitor progress and performance against the project plan, identify, resolve or escalate operational problems to minimize delay
• Analyse project requirement and perform standard technical calculations
• Coordinate the activities of external contractors to project integration and satisfactory standards of service
• Estimate the costs, resources and time required to complete the assigned phase of an engineering project and monitor activities, allocate resources and assign tasks to ensure targets are met
• Conduct project meetings and prepare regular reports to communicate the status of the project within and beyond the project team
• Set priorities, allocate tasks, and coordinate with project staff to meet project targets and milestones
• Any other duties to be assigned from time to time

Pre-requisites

• Bachelor’s Degree in Electrical Engineering
• Minimum 5 years of relevant experience in power and/or industrial plants construction projects
• Hardworking, independent, resourceful, energetic and dynamic
• Ability to handle stress and be sensitive to deadlines.
• Proactive learner and ability to multi-tasks
• Willing to work long hours and under construction site conditions
• Project location: Jurong Island

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Job Responsibilities:

• Support continuous improvement efforts in QMS.
• Support in root cause analysis and implementation of corrective/ preventive actions for process related concerns.
• Analyze and provide timely respond to customer complaints.
• Interface with Customer and Operations to ensure new product transfer to manufacturing are in accordance with approved requirements.
• Prepare Quality performance metrics and reports.

Requirements:

• Diploma in Mechanical Engineering, Quality, or equivalent.
• Minimum 2 years work experience in Quality Management System in manufacturing environment.
• Good knowledge of ISO 9001. Knowledge of API Q1 is preferred.
• Strong command of English language, both oral & writing.
• Knowledge of metal working industry is preferred.
• Knowledge of risk assessment principles and methods.
• Knowledge of SAP is preferred.
• Positive & proactive attitude.

Job Responsibilites:

• Requisition fulfilment for raw materials, workshop tools and office supplies
• Generate purchase orders, oversea delivery schedules and maintain purchase records
• Manage suppliers, resolve discrepancies or quality issues on purchases
• Inventory management with workshop/storeman

Job Requirement:

• NTC/ Diploma preferably in Mechanical/Precision engineering
• Min. 2 years of experience preferably in Oil & Gas/engineering
• Excellent communication, negotiation and interpersonal skills
• Proficient in Microsoft Excel, SAP knowledge will be an added advantage

1. Developing and implementing quality standards;
2. Developing and implementing quality management systems (QMS).
3. Organizing internal audit based on QMS standards (such as ISO9001, IATF16949, vda6.3) and supplier audits.
4. Determining quality metrics, monitoring and analyzing the performance;
5. Inspecting and testing products, raw materials and processes to ensure quality specifications are met.
6. Collaborating with different departments to develop and implement controls and improvements.
7. Ensuring that workflows, processes, and products comply with QMS requirements and customers’ expectation.
8. Investigating and troubleshooting product or production issues.
9. Developing corrective actions, solutions, and improvements.
10. Reviewing codes, specifications, and processes.
11. Formulation and Process Optimization.

Responsibilities

• Ensure that the model aligns with the standards and goals set in BIM BEP/LAE BIM GUID and BIM project criteria
  
• Collaborate and coodinate internally or/and externally with other desciplines design changes and model changes
  
• Develop accurate construction drawings and extact data based on the descipline BIM platform
  
• Coordinate design documentation as a methodology with full utilisation of BIM software and tools
  
• Able use navisworks to present VDC
  
• Attend coordination meeting with Project Consultants and coordinate with Project member of other disciplines

• Responsible for maintaining and updating of BIM Model until as build
  
• Carry out proper procedures and preparation for drafting for the different stages of issure & authority submission of the project assigned.
  
• Production of shop-drawings and as built drawing, including BIM Models if required.
  
• Document control of submissions (Technical Data, sho-drawings, as built)
  
• Maintain records for changes and updates on drawings.
  
• Develop shop drawing according to the schedule.
  Produce/Draw/Amend/Update drawings using BIM according to specs, co-ordinate with project department
  
• Other duties assigned by the superior
  
• Ad-hoc duties assigned by the Management from time to time
  

Requirement

Minimum Diploma in M&E / Engineering from recognized institutions

• 3 years of experience in MEP drafting using 3D BIM (Autodesk Revit) and Autodesk Navisworks for commercial projects

• Well versed with strong techniques in Autocad, 3D BIM Revit in MEP and other 3D software

• Proficient in MS Suites

• Good verbal communication skills and interpersonal skills

• Strong analytical skills and ability to be an independent problem solver

• Team player with ability to multi-task in a fast-paced environment

• Highly motivated and enthusiastic

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

Review electrical engineering drawings and refer issues requiring changes.

Assign job tasks and work as per electrical project schedules.

Review all electrical drawings with Leadmen performing on assigned jobs to them.

Stimulate fabrication standards to ensure quality work attained from assigned staff.

Recruit, guide, train, monitor and terminate assigned employees as required.

Recommend effective solutions specified particular weight related to employment status of employees.

Schedule, assign, plan and supervise electrical shop personnel performance on different electrical projects.

Plan and prepare work and equipment usage schedule

Lead and manage ACMV system design, installation, and commissioning in construction projects. Coordinate procurement of ACMV equipment and materials. Coordinate and liaise with consultants, main contractors, and sub-contractors. Perform tests, inspections, and commissioning of ACMV systems for proper functionality and performance. Prepare reports, progress updates, and documentation related to ACMV works for project management and client review Supervise and check sub-contractors’ works according to design drawings, specifications, and regulations. Generate incident reports. Perform all other duties as assigned and required.

Diploma/Degree in Mechanical Engineering or equivalent. 3 years of working experience in the construction or mechanical related fields is required for this position. Required skills: Microsoft Office, Microsoft Project, and AutoCAD

At Alcon, we are driven by the meaningful work we do to help people see brilliantly. We innovate boldly, champion progress, and act with speed as the global leader in eye care. Here, you’ll be recognized for your commitment and contributions and see your career like never before. Together, we go above and beyond to make an impact in the lives of our patients and customers. We foster an inclusive culture and are looking for diverse, talented people to join Alcon.

As a Principle Process Engineer/ Process Manager supporting Engineering Department, you will be responsible for developing strategies and capabilities to implement continuous quality and productivity improvements to deliver measurable business targets (TPC improvement) that is aligned with the strategic site objectives at Tuas.

In this role, a typical day will include:

• Budget and manage major site process and CAPEX projects meeting spending and forecast needs.
• Pro-actively act as coordinator and communicator in key meetings to understand the needs from various stakeholders
• Track and report on project portfolio performance, providing a real-time, comprehensive, and prioritized view of all projects, its deliverables, risks, and contingencies planned. Effective tracking and communication of project status and metrics.
• Help to maintain and update the project management framework and disciplines as necessary.
• Support the creation and improvement of processes, procedures, and tools.
• Perform regular “deep dive” review meeting with all dept. leads, sponsors and SLT and challenge the status quo and progress of the project as needed.
• Provide technical advice in processes/equipment design.
• Managing a resource capacity plan or resource forecast to help understand resource availability for responsible projects.
• Closely coordinate the impacts of global "top down" initiatives (non-start-up related i.e., HR, FIN, General Management) to monitor and report progress and risks/mitigation plans, in a timely manner.
• Ensure adequate and robust communication across the site regarding globally driven projects, key site initiatives and serve as a point of contact for global communications team.
• Develop site’s process engineering capabilities (design related) to assure robustness of operations and identify CI opportunities.

What You Will Bring to Alcon:

• Min Degree in any sciences or Engineering related studies.
• High performing, credible professional, with a track record of successfully managing projects
• A good understanding in the principles and methods of medicine manufacture and GMP attained in a manufacturing environment
• Approx. 10-15 years of GMP experience.

How You Can Thrive At Alcon:

• Opportunity to work with a leading global medical device company.
• Collaborate with a diverse and talented team in a supportive work environment.
• Competitive compensation package and comprehensive benefits.
• Continuous learning and development opportunities.

Alcon Careers

See your impact at alcon.com/careers

Responsibilities:

• Source for Mechanical components to support new projects
• Perform cost analysis and select best supplier to meet the product requirements
• Responsible in managing the relationship with suppliers on all commercial issues
• Perform cost reduction, VA/VE activities, etc to achieve the KPIs set by the management (eg. the material cost reduction target)
• Able to implement supply management strategies and activities such as VMI, JIT, EDI capabilities, etc.
• To be the escalation point when there is delivery issues during the MP and NPI stages
• Management of SAP data integrity

Requirements:

• Diploma/Bachelor's Degree in Engineering
• At least 2 years working experience in the EMS
• At least 1 year of experience in sourcing, purchasing or procuring of mechanical parts components
• Strong knowledge in electro-mechanical commodities (LCDs / cables) or electronics components (active or passive components)
• Proficient in SAP/Microsoft Office

Interested candidates are to submit a detailed resume to speed up the application process. We regret to inform that only shortlisted candidates will be notified. Thank you for applying.

A Corp Lab in NTU is looking for a Research Engineer I or II to work on Large Language Models for Health. This role requires a passion for innovation, the ability to work effectively in a collaborative environment, and a commitment to contributing to groundbreaking discoveries in project-based research.

Key Responsibilities:

• Work closely with the Principal Investigator (PI) and team members/engineers to design and implement LLMs-based conversational agents.
• Assist in data and LLM analysis and conducting experiments for project-based research questions.
• Assist in developing algorithms and models based on existing LLMs to enhance multi-turn conversations, proactive inquiry, and knowledge-guided common-sense reasoning in conversational agents.

Job Requirements:

• Master’s degree or Bachelor’s Degree in computer science/engineering.
• Solid knowledge in Natural Language Processing, LLMs, or conversational AI.
• Proficient in programming languages and frameworks relevant to machine learning, specifically Python and PyTorch.
• Able to test, debug and optimize existing code base and other features.
• Excellent communication skills and good problem-solving skills.
• Relevant publication record in NLP and conversational AI is preferred.

We regret that only shortlisted candidates will be notified.

Responsibilities:

• Responsible to contribute to product cost savings through identifying opportunities for cost savings & build value engineering project pipeline
• Develop methodologies, templates and approach for target costs based on product analysis data
• Analyze and evaluate design for materials, manufacturing process & supply chain for value analysis / value engineering opportunities
• Execute & drive VAVE projects starting from Idea generation to implementation
• Co-ordinate with Global & local stake holders including suppliers for project execution including samples, prototypes and testing requirements
• Build active VAVE project funnel and build active VAVE project funnel and todDrive multiple VAVE projects in a timely manner to support business goal target
• Establish and update processes for execution on teardown, benchmarking and VAVE requests

Requirements:

• At least 5 years of working experience in the EMS or an MNC environment
• Strong analysis skills, knowledge in material pricing and strategy
• Strong knowledge in Mechanical/Electro-Mechanical/Electronics commodities

DevOps Engineer has an essential role in integrating the project functions and resources across the product life cycle, right from planning, building, testing, and deployment to support.

We are looking for individuals who can be responsible for deploying product updates, identifying production issues, and implementing integrations that meet our customers’ needs. If you have a strong technical background and are interested in working with developers and engineers to ensure that software development follows established processes and works as intended, then a career as a DevOps engineer could be the perfect fit for you.

Objectives of this role

• Building and implementing new development tools and infrastructure
• Understanding the needs of stakeholders and conveying them to developers
• Working on ways to automate and improve development and release processes
• Testing and examining code written by others and analysing results
• Ensuring that systems are safe and secure against cybersecurity threats
• Identifying technical problems and developing software updates and fixes
• Working with software developers and engineers to ensure that development follows established processes and works as intended
• Planning projects and being involved in project management decisions

Responsibilities

• Deploy systems, updates and fixes and provide Level 1 technical support
• Build tools to reduce occurrence of errors and improve customer experience
• Develop software to integrate with internal back-end systems
• Perform root cause analysis of production errors and resolve technical issues
• Develop scripts to automate visualisation
• Design procedures for system troubleshooting and maintenance

Pre-requisite skills required for a DevOps Engineer role include:

• Experience working on Linux based infrastructure
• Excellent understanding of Ruby, Python, Perl, and Java
• Configuration and managing databases
• Excellent troubleshooting
• Working knowledge of various tools, open-source technologies, and automation tools which may be required for process automation and testing
• Awareness of critical concepts in DevOps and Agile principles

Responsibilities

· Responsible for implementing ISP Algorithm into HW using Verilog, SystemVerilog and/or SystemC (High Level Synthesis)

· Define ISP HW Architecture based on product features and performance requirements, also with gate count and power estimation

· Verify Logic at ISP level and Digital System level

· Optimize Design for less gate count and low power consumption

· Drive ISP Design activities in close collaboration with ISP Algorithm Team

Requirements

· Minimum MSEE, or BSEE, or equivalent, plus 3+ years of Digital Design and verification related experience

· Experience / knowledge in CMOS Image Sensor and image signal processing (ISP)

· Experience / knowledge in System C/C++, System Verilog, and Catapult HLS tool.

· Strong debugging and problem-solving skills

· Good communication and interpersonal skills

· Result oriented and embrace change behaviours

Sales Development

- To market and sale of products for overseas and local market.

- To support customers needs & requirement.

- Required travel to attend oversea customers.

Requirements

1. Relevan working experience in Sales preferred.

2. Advantahe to have mechanical engineering background.

3. Proficient in MS Office applications.

4. Salary commensurates with experience.

Responsibilities:

• Responsible to contribute to product cost savings through identifying opportunities including alternates for cost savings including during the bid stage, build value engineering project pipeline and drive multiple VAVE projects in a timely manner to support business goal target.
• Handle component changes due to obsolescence or supply shortages. Assist with location of component sources vendors and manufacturers, locate alternate sources, find components substitutions along with qualification strategy.
• Monitor, identify and resolve all lifecycle issues and assist various teams to identify appropriate resources and substitutes for components.
• Assess quality, reliability, and compatibility of components through testing, analysis, and collaboration with engineering and suppliers.
• Analyze and evaluate design for materials, manufacturing process & supply chain for value analysis / value engineering opportunities.
• Co-ordinate with Global & local stake holders including suppliers for project execution including samples, prototypes and testing requirements.
• Technical Data capture and analysis of Electronic Components from Manufacturer provided datasheets or websites.

Requirements:

• At least 3 year of working experience in the EMS or an MNC environment with proven experience in managing suppliers .
• Strong analysis skills, knowledge in material pricing and strategy.
• Experience with evaluation and qualification of electrical/electronic component/manufacturers. Proven experience in successful VA/VE proposals.

Only shortlisted candidates will be notified. Thank you for applying.

Responsibilities

• Work closely with sales & service team to provide pre and post technical sales support
• Respond to customers’ enquiries, review project specifications, prepare sales quotations, etc.
• Coordinate with customers to facilitate the planning and scheduling of activities prior to commencement of work, ensure permit-to-work/ relevant approvals are obtained
• Liaise with internal departments to meet customer requirements and delivery schedules
• Manage customer accounts and maintain positive relationships
• Provide regular reports and updates on ongoing jobs

Requirements

• At least 2 years or more related experience working with customers in Oil & Gas, Marine & Offshore, Heavy Machinery or other industrial sectors.
• Good communication and interpersonal skills
• Have a strong sense of urgency, meticulous, excellent follow up skills and negotiation skills.

We thank you for your interest but regret that only shortlisted applicants will be notified.

Application is open to Singaporeans only.

A chemical manufaturing company located in the West is looking for electrical engineer.

Job Scope :

• Assist with electrical wiring and installation
• Attend to electrical breakdown and maintanance
• Design electrical diagram for the maunfacturing process line
• Troubleshoot on electrical fault and error
• Carry out preventive maintenance
• Assist wtih electrical sub-station servicing
• Able to work with Automation and SCADA

We are looking for an Application Support Engineer to join a software solutioning company delivering FinTech Applications.

• Salary package up to $4,000 + AWS + VB (~2 months bonus)
• Gain exposure to the latest web technologies
• Central work location - Hybrid working arrangement

Responsibilities:

• Provide daily support to users including answering questions, analyzing problems, and quickly forming solutions to return systems to proper operation.
• Maintain detailed records of daily interactions with users, reported issues, and completed solutions.
• Collaborate with Level 2 technical staff and project managers to establish goals and objectives for system improvements and upgrades.
• Create and implement new processes to improve efficiency and customer satisfaction.

Requirements:

• Qualification in Computer Science or equivalent.
• Experience with some programming languages (HTML, JAVA) will be an added advantage.
• Good writing and communication skills.
• 12-hour shift arrangements are in 3-2-2-3 (Work - Rest - Work - Rest days) rotating manner.

Interested candidates may apply via email to [email protected] (indicating Job ID J44450 for faster processing). All job applications will be processed with strict confidence and only shortlisted candidates will be contacted.

Lee Wen Ying (Mattias) - R23112909

ScienTec Consulting Pte Ltd - 11C5781

Responsibilities:

• Source for Mechanical and electronics components to support new projects
• Perform cost analysis and select best supplier to meet the product requirements
• Responsible in managing the relationship with suppliers on all commercial issues
• Perform cost reduction, VA/VE activities, etc to achieve the KPIs set by the management (eg. the material cost reduction target)
• Able to implement supply management strategies and activities such as VMI, JIT, EDI capabilities, etc.
• To be the escalation point when there is delivery issues during the MP and NPI stages
• Management of SAP data integrity

Requirements:

• Diploma/Bachelor's Degree in Engineering
• At least 2 years working experience in the EMS
• At least 1 year of experience in sourcing, purchasing or procuring of mechanical parts components
• Strong knowledge in electro-mechanical commodities (LCDs / cables) or electronics components (active or passive components)
• Proficient in SAP/Microsoft Office

Interested candidates are to submit a detailed resume to speed up the application process. We regret to inform that only shortlisted candidates will be notified. Thank you for applying.

We are looking for a Senior Software Engineer proficient in TypeScript to join a team developing large scale public-fronting applications.

• 5 days work week (Mon - Fri).
• Basic salary up to $11,000 + AWS
• Hybrid work arrangement.

Responsibilities:

• Lead and mentor a team of software engineers, fostering a culture of excellence, innovation, and collaboration.
• Actively participate in all aspects of the software development process (Both front-end and back-end).
• Work closely with stakeholders throughout the software development life cycle.
• Adopting proven software engineering practices like pair programming, code reviews, test-driven.
• Drive technical decision-making processes, advocating for best practices, code quality, and scalability

Requirements:

• Min 5 years experience.
• Experience with Typescript and frameworks such as React.js, Node.js, Nest.js.
• Experience of leveraging on cloud platforms such as Amazon AWS.
• Proficient in unit testing using JUnit, Jest, Mocha and other testing frameworks.
• Experience in solution/system design and architecture.

Interested candidates may apply via email to [email protected] (indicating Job ID J44451 for faster processing). All job applications will be processed with strict confidence and only shortlisted candidates will be contacted.

Lee Wen Ying (Mattias) - R23112909

ScienTec Consulting Pte Ltd - 11C5781

Job Description & Requirements

- Administer project planning and project execution
- To study drawings, specifications and contracts to understand project requirements
- Willing to learn and hands-on
- Liaise with client, consultants & main / sub-contractors and coordinate for site activities arrangement
- Perform site inspection and ensure all project activities are performed productively and are in accordance to specification and schedule, in the most efficient and cost effective manner
- Assist in cost control and estimating activities;
- Planning and deployment of resources such as manpower, machinery, equipment and material
- Preparation of report, Method Statements and technical submissions
- Ensure the project complies with regulations and clients’ specifications
- Adhere to safety and health regulations and aim for zero accident in the workplace
- Ensure safety and housekeeping is to maintained to the highest standard
- Prepare job completion record and progress claims
- Continually seek improvements in the work systems
- Ensure all company reports and documentation are completed accurately and on time;
- To perform Ad-Hoc duties as per assigned