Position Summary

As Engineering Project Electrical Section Lead to roll the overall electrical engineering activities

To provide technical guidance to fellow Draftsman, Assist. Engineer and Engineer for competencies development

To complete assigned tasks within allocated timeline with high degree of accuracy

Technical support for site technical issue

Tasks and Responsibilities

• Familiar with the Marine and offshore engineering process
• Review and develop the Equipment Technical Specification based on Owner’s Contractual Requirement, Classification bodies, and all relevant authorities
• Prepare the engineering drawings of each system( Single line diagram/ equipment layout/ termination drawing)
• Plan the cable routing and build the 3D modeling
• Prepare the Cable cutting List/ Schedule
• Provide technical support for site arises technical issue
• As Section Project Lead in charge electrical design activities
• Review and advise the project’s design mode & standard
• Familiar with principal of the product and relevant standard
• Review and approve vendor submission documents
• Report the project daily discipline (Man-hour/Schedule etc.)
• Feedback for profession’s design mode & standard
• Study & Solve the project issues under Electrical responsibility
• Attend and report in project and section meeting
• Coordinate with Shipyard / Consultant / Vendor / Class / Owner
• Project Handling- New building project, Repair, Upgrading, Conversion projects

Job Requirement

• Minimum 5-8 years of relevant work experience in the marine/offshore industry Electrical & Automation newbuilding engineering design.
• Familiar on Power and Automation system/ Navigation system.
• Familiar with Rules and Regulation and Statutory Requirements.
• Familiar with AutoCAD/ MS Office/ AVEVA.

Production Engineer
Mechnical Engineer (Building construction)

Permanent, Full Time, Island Wide

Executive

2 years - 5 years exp

$3000 to $5,000 Monthly

Roles & Responsibilities

We are looking for someone who are have Building and Construction knowledge in Steel Structural works.

Job Descriptions:

· Monitor and Handle product quality, budget, product knowledge, and arrangement for site delivery and site matters.

· Handle and Instructs employees on machine operation, safety and company policies.

· Inspect Inputs/outputs to check for QC/materials. PO from established quality standards.

· Coordinates workflow, processes, and machineries.

· Research or recommend procedures for facility or equipment maintenance or modification, including the replacement of machines.

· Monitor team and work procedures to meet production schedules, as well as general administrative works.

· Provide direction for projects tasks and hold all team members accountable for safety, quality and production

· Conduct daily briefing with crew to review production goals and performance feedback

· 5.5 days of work week

Qualifications and Requirements:

· Minimum of 2 - 5 years’ experience as a production engineer in construction and Steel of Structural, White Aluminum, or having related safety certificate and etc.

· In-depth knowledge of extrusion procedures, equipment and WSH guidelines.

· Able to read and understand the AutoCAD and 3D drawings.

· Problem-solving skills.

· Responsivity and Mature

· Truthful and Honesty

· Observant and alias the project, dateline, and follow instructions by the production Supervisors and follow closely and with the administration work.

Job Info:

• Salary: Basic up to $4000 + AWS + VB
• Working Hour: Monday - Friday (7.50am - 4.55pm)
• Location: Joo Koon

Job Scope:

• Plan, supervise, and execute projects and tasks
• Address and prevent issues to enhance customer satisfaction regarding product quality
• Maintain quality, environmental, and water efficiency systems within the company
• Assist in the maintenance and compliance of ISO 9001, ISO 14001, IATF 16949, ISO 17025, ISO 13485, and ISO 46001 standards
• Understand the company's policies and objectives related to quality, environment, water efficiency, and occupational health and safety (OH&S), as well as environmental aspects, safety risk assessments, and information security risks
• Conduct internal Quality and Environmental Management System (QEMS and WEMS) audits and coordinate external audits
• Monitor quality failure costs in the production department
• Perform calibration and maintenance of x-ray machines, ensure cleanliness in the x-ray equipment area, and update monthly schedules for x-ray machine maintenance

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

*We regret to inform you that only shortlisted candidates would be notified*

We wish you all the best in your career search.

You are welcome to visit our website at http://www.rkgroup.sg/

RK Recruitment Pte Ltd | EA License No.: 20C0280

Chou Jia Hooi | EA Personnel No.: R23115147

Job Responsibilities:

• Serves customers by identifying their needs and engineering adaptations of products, equipment, and services.
• Cooperate and communicate effectively with project manager and other project participants to provide assistance and technical support.
• Identifies current and future customer service requirements by establishing personal rapport with potential and actual customers in a position to understand service requirements.
• Provides product, service, or equipment technical and engineering information by answering questions and requests.
• Establishes new accounts and services accounts by identifying potential customers and planning and organizing sales call schedule.
• Prepares cost estimates by studying all related customer documents, consulting with engineers, architects, and other professional personnel.
• Determines improvements by analysing cost-benefit ratios of equipment, supplies, or service applications in customer environment and engineering or proposing changes in equipment, processes, or use of materials or services.
• Gains customer acceptance by explaining or demonstrating cost reductions and operations improvements.
• Complies with local legal requirements by studying existing and new legislation, and anticipating future legislation.
• To ensure the maintenance programs and rectification jobs are managed by a team of technical officers and technicians efficiently.
• To ensure all works carried out safely and/or in accordance with safety procedures.
• Any other tasks assigned by leader.

Qualification:

- Minimum Diploma in engineering.

- Able to guide and troubleshoot ACMV faults.

- Good communication skills both verbal and written.

- SG Class 3 Driving License preferred.

- Familiarity with office software and phone systems.

- Has a good safety mindset and displays good WSH behaviour.

Responsibilities

Electrical system lead for electrical scope of works within a project.

• Ability to prepare overall electrical system concept
• Manage and prepare Request for Quotations (RFQs) and review specifications
• Ability to prepare electrical tender proposal for EPC tender
• Review technical proposals from OEMs to ensure compliance to our design requirement
• Plan and prepare an electrical Master document List
• Prepare manpower loading plan
• Review cable routing, BOQ, direct engineers, subcons and drafters

Ability to review and design of 230kV, 66kV, 6.6kV, and LV power supply system including:

1. Sizing of power generation systems, transformers, UPS, and DC systems
2. Electrical Single Line Diagrams
3. Power system Analysis by ETAP
4. Protection coordination
5. Cable Sizing
6. HV, MV and LV distribution system including Switchgear and MCC
7. UPS/DC system
8. Solar System
9. PMS
10. Electrical Room layout
11. Cable and Busduct Management System

​​​​​​​Familiar with the following systems and equipment

1. Steam/Gas turbine generator
2. EDG (Emergency diesel generator)
3. GCB/TCB/UCB
4. GSUT/UAT/AT transformers
5. MV/LV VSDs
6. IPBD/SBPD/LV Busduct
7. HV/MV/LV Switchgear and MCC
8. Civil interface for pull pit and penetration

Requirements

1. Bachelor’s degree in electrical engineering
2. At least 3 years of experience as electrical design engineer
3. Experience in electrical design is a must
4. Knowledge of EPC/M work processes as well as familiarity with the various project phases and the scope/deliverables
5. Strong organizational skills, technical knowledge of electrical systems in a process plant, leadership, strong computer skills, and time management.

Work location: Tuas Nexus

Job Info:

• Salary: Basic up to $3500 + AWS + VB
• Working Hour: Monday - Friday (8:30am - 6pm)
• Location: Potong Pasir MRT

Job Scope:

• Install, modify, service, and upgrade equipment by maintenance and service agreements and technical specifications
• Perform regular maintenance, preventive, and corrective maintenance on customer equipment to maintain equipment reliability
• Maintain accurate service records, monitor the performance of equipment, and notify senior engineers of recurring problems
• Understand and practice factory diagnosis and preventive maintenance activities
• Understand solution items and make proposals to customers
• Perform other related ad-hoc tasks as assigned by management from time to time

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

*We regret to inform you that only shortlisted candidates would be notified*

We wish you all the best in your career search.

You are welcome to visit our website at http://www.rkgroup.sg/

RK Recruitment Pte Ltd | EA License No.: 20C0280

Chou Jia Hooi | EA Personnel No.: R23115147

COMPANY DESCRIPTION

Beyondsoft International (Singapore) Pte. Ltd. was set up in 2007 and established as the regional headquarters for the Southeast Asia (SEA) and European markets in September 2015. Based on our vision of "Using technology to promote social progress, economic development and become a global customer preferred partner" and our concept of "Beyond your expectations", Beyondsoft is committed to provide our customers in countries along the "Belt and Road" with comprehensive solutions and products and creating commercial value for customers to realizing continuous businesses development.

Our core business includes:

1. IT development services providing customers with IT consulting, software research and development, software and hardware testing, system integration and operation and maintenance, data analysis and other services;
2. New retail solutions and products through intelligent products, helping small and medium-sized enterprises (SMEs) realize the digital transformation of their daily operations;
3. Internet of Things (IoT) platform and solutions comprehensive use of IoT, artificial intelligence, big data, cloud computing and other technologies to provide IoT solutions for intelligent upgrades in cities, parks, buildings and industries, to create a smart future.

For more information, please visit www.beyondsoft.com.

RESPONSIBILITIES

• Collaborate with the program team to define product requirements and finalize scope, delivery, and risk mitigation plans for firmware programs.
• Lead technical feasibility assessments of key product features and work closely with firmware project managers to ensure alignment with program objectives.
• Partner with R&D teams to identify firmware deliverables for each hardware phase and coordinate with firmware asset teams to meet product requirements.
• Review test plans and high-level test scope with firmware quality lead, ensuring comprehensive coverage of firmware testing activities.
• Drive the resolution of firmware issues with asset teams and lead task forces to triage complex system issues as needed.
• Collaborate with partners in defect reviews to ensure product quality and customer satisfaction.
• Drive key firmware milestone activities, ensuring timely delivery and adherence to program timelines.

• Bachelor's degree in Computer Engineering/Information Technology/Electronic Engineering or related IT field.

• Minimum 2 years of working experience in relevant IT field.
• Experience in embedded firmware development in RTOS environment.
• Experience in various phases of the software development lifecycle.
• Experience in source code management tools (E.g., Git).
• Experience and proficiency in C/C++ are an advantage.
• Excellent communication and interpersonal skills, with the ability to work effectively in a fast-paced, dynamic environment.
• Knowledgeable and experience in scripting languages (Python, Linux Shell) is an advantage.
• Utilize Linux-based development experience and knowledge, with familiarity with Agile development methodology is a plus.

Summary

Ensures compliance with all government laws and regulations relating to environmental safety.

Develops and administers policies, procedures and training programs relating to hazardous, material handling and industrial safety. Also acts as a Radiation Safety Officer for the company.

Serves as point of contact for external agencies including emergency response personnel.

Hazardous waste – Develops, implements and monitors company environmental safety programs and policies to ensure compliance with federal, state and local environmental, health and safety regulations.

Key accountabilities

• Provide EHS information, reports and training
• Track and review EHS management Programs
• Support EHS committees and lead EHS internal audits
• Act as Radiation Safety Officer for Singapore site
• Monitor and update all company licenses/permits
• Monitor and work with respective departments on license/permit renewals
• Plan and conduct training to Shopfloor employees on EHS related documents on a regular basis at least once a year
• Ensure company’s compliance with legal requirements
• Drive EHS activities, ensuring compliance with Corporate EHS requirements
• Conduct monthly EHS inspections together with EHS committee members
• Promote safety and health by conducting in-house safety / health campaigns
• Monitor industrial hygiene programs, conduct hazard analysis of hazardous substances and evaluate hazard control methods
• Ensure company complies with the ISO14001 and ISO45001 Management Systems requirements
• Work closely with contractors, vendors and internal customers to resolve safety, environmental and health issues

Requirements

• Degree / Diploma in Environmental Engineering or other engineering discipline with a minimum of 2 years of experience in EHS Management and Facilities Systems
• Registered Safety Officer with MOM
• Experience in handling radioactive materials preferred
• Strong analytical and interpersonal skills
• Ability to manage multiple and complex tasks in a fast paced environment
• Proficient in Microsoft business applications

Overview:

We are seeking a knowledgeable and passionate individual to join our team as an Industrial Control System (PLC) Instructor (part-time) This role will involve teaching and training individuals in the fields of electrical controls, Programmable Logic Controllers (PLCs), and industrial electricity. The ideal candidate will have a strong background in electrical engineering or a related field, along with practical experience in industrial settings.

Responsibilities:

• Develop and deliver comprehensive lesson plans and training materials covering topics such as electrical controls, PLC programming, motor controls, and industrial electricity.
• Provide guidance and support to students as they work through practical exercises and projects to reinforce learning objectives.
• Assess student progress through assignments, quizzes and mock tests, providing feedback to aid in their development.
• Stay updated on changes in regulations related to electrical controls and industrial electricity.
• Offer mentorship and guidance to students interested in pursuing careers in electrical engineering or related fields.
• Participate in professional development activities to enhance teaching skills and knowledge of relevant subject matter.

Qualifications:

• Relevant degree for Engineering (Electrical, Mechanical, Computing, or Mechatronic).
• Undergraduates / Fresh graduates in local Universities of Singapore are welcome to apply.
• Experience with working with electrical controls, PLCs, and industrial electricity in a professional setting is an added advantage.
• Knowledge of equipment and tools commonly found in industrial settings.
• Familiar with PLC programming and experience with PLC hardware and software
• Knowledge of developing instructional materials and delivering training sessions to diverse audiences is preferred.
• Knowledge of relevant industry standards and safety regulations governing electrical systems and industrial equipment.
• Patience, enthusiasm, and a genuine passion for teaching and helping others succeed in their educational and career goals.
• Training will be provided.

Working Hours:

• 3 - 6 Hours per week.
• Weekday evenings or weekends.

Location:

• 5 minutes walk from Jurong East MRT

Interested candidates please submit your resume through: [email protected]

Job Descriptions:

• Lead the Mechanical team to ensure that industrial machinery and equipment runs smoothly and reliably.
• Lead on improvements Projects and ensure oversee on task execution to completion.
• Creating maintenance procedures and Work Instruction.
• Managing stocks of supplies and equipment.
• Keeping records and pull data of faults and repairs history from SAP and prepare analyzation report for reliability action.
• Any other duties and responsibilities as assigned from time to time.

Job Requirements:

• Strong mechanical background and basic electrical knowledge.
• Have at least 5 working years’ experience in a process plant with maintenance experience.
• Minimum diploma in mechanical.
• Autonomous, good communication skills, team player, high organizational skills and analytical.
• Proficient in Ms Office

AMT Pte Ltd is seeking an Industrial Automation Engineer to manage the following scope:

• In-House Automation Systems and Control

Scope:

Design / Development & Implementation

• System Design

Design and develop control systems and automation solutions using PLCs for various applications, including but not limited to manufacturing processes, material handling, and machinery control.

• Programming and Configuration

Write, test, and debug PLC software programs to meet the specific needs of an automation project.

• Simulation and Testing

Create simulations to test PLC program logic and system designs before deployment to ensure they meet the required specifications and performance criteria.

• Installation and Commissioning

Oversee the installation of automation systems and perform commissioning activities to ensure that they operate correctly and meet project and safety requirements.

• Documentation

Prepare and maintain accurate project documentation, including system designs, specifications, and operational manuals.

• Troubleshooting and Repair

Diagnose and rectify issues with PLC systems and automation equipment, sound problems-solving skills.

• Collaboration with Cross-Functional Teams

Work closely with the Mechanical Design Engineers to ensure that automation systems meet the needs of all stakeholders.

• Vendor Liaison

Coordinate with equipment suppliers and vendors for the procurement of system components, technical support, and warranty services.

• Training and Support

Provide training and technical support to end-users and maintenance teams, ensuring they understand how to operate and maintain the automation systems effectively.

• Safety Standards Compliance

Ensure all the automation solutions comply with all the relevant safety standards and regulations.

Requirement

1. Degree/Diploma in Electrical/ Electronics/ Automation / Mechatronics
2. 3 or more years working experience in PLC Control Program design and implementation in industrial automation.
3. Proficient in Keyence PLC / ABB Robots is an added advantage.
4. IT knowledge for Server/Client and Infrastructure
5. Electrical, instrumentations and control knowledge
6. Evidence of independent and can-do attitude

Summary

The Senior Systems Test Engineer for Value Engineering is responsible for evaluation of value engineering efforts on current products and achieving strategic quality goals following the launch of new developments (NPIs) and existing products. Key responsibilities will include working with the team to drive business stakeholders’ priorities participating in plans to successfully support all active products in the areas of cost reduction, supply chain support, and participate in design for in-sourcing projects. with key technologies.

Key accountabilities

• Primarily responsible for providing evaluation results (verification and validation), to ensure proper performance, long-term stability, reliability, robustness, and customer-usability for Value Engineering projects on all PerkinElmer products (include Mass Spectroscopy, ICP OES and GC products). Log and track all defects, test results.

Requirements

• Bachelor of Science degree or equivalent required.
• 2-5 years analytical instrumentation experience.
• Statistical analysis capabilities a plus.
• Excellent verbal and written communication skills; requires interaction with managers, supervisors, engineers in a fast-paced environment.
• Demonstrated ability to succeed in a fast-paced environment, working on multiple projects with constantly changing priorities and deadlines.
• Self-starter with the ability to prioritize, multi-task, and take ownership of projects, performing job requirements with minimal oversight and attention to detail.
• Positive attitude, high energy and troubleshooting skills
• Fully responsible for significant/challenging deliverables keeping management informed of progress and strategy.

POSITION SUMMARY

1. Responsible for the overall operations of the Laboratory.
2. Works independently, receiving direction from manager and/or higher level employee(s)

CORE RESPONSIBILITIES AND TASK

1. Compile and maintain records such as time, date, type, quantity, quality, source and destination of water samples collected from customers.

2. Perform water analysis in the laboratory for both internal and external customers and generate the resultant water analysis report.

3. Evaluate water analysis results CC to help determine root cause of customer’s complaints and provide recommendation to help resolve product / process issues.

4. Procure, exercise and maintain safe and secure inventory control and storage of chemicals, apparatus and analytical equipment in the laboratory.

5. Conduct bench and pilot scale treatability test or evaluation product performance.

6. Responsible to maintain lab and surrounding areas in a safe and good operating condition in accordance to factory regulations and environmental standards.

7. Support company’s ISO audit by providing proper documentation of the records, reports, and SOPs.

8. Preparation of chemicals for product sales

9. Assist in development of water and wastewater treatment solutions

10. Participate in Continuous Improvement activities i.e. 5S and LEAN 101 and Emergency Response Operation including fire drills.

POSITION REQUIREMENTS

• Relevant Chemical Engineering / Environmental Engineering / Chemistry Degree / Diploma
• specialized skill training/experience/certification for laboratory operation is preferred
• 2 - 3 years of successfully demonstrated experience in the area of responsibility
• Above requirement plus specialized skill training/certification
• Geographic Regions Supported: South East Asia
• Knowledge of water quality analysis such as TSS, TDS, COD, Turbidity, TOC, Ion Chromatography et.; knowledge of chemical handling and water treatment process; Knowledge of EHS requirements in the use storage of different types of materials and chemicals including hazardous chemicals in water treatment.
• Above requirement plus communication and basic computer skills. Interact with others requiring social skills, a straight forward exchange of information and the ability to understand and influence using data and logic.

Purpose and Scope

• Provide maintenance works and plant equipment to support the Operation

Key Roles and Responsibilities

• Plan and schedule corrective and preventive maintenance works. Include liaising with operations, prioritize jobs, mobilize work force, spares and allocate resources
• Lead technicians in implementing in preventive and corrective maintenance
• Trouble shoot critical or major plant issues, participate in Root Cause Analysis (RCA) studies, plant improvement initiative, and drive cost management.
• Implement management initiatives to optimize the assets and seek to continuously improve on the methods, procedures and update with the latest developments in the market by adopting a suitable approach like proactive initiatives viz predictive and preventive maintenance activities and default actions like failure finding, redesign and run to failure
• Review budget, monitor spending against budget. control cost
• Upkeep risk registers, take part in safety walkdowns, implement safety initiatives, and ensure that good safety practices are practiced by all parties’ maintenance work
• Develop and establish maintenance procedures, risk assessment and method statements for all maintenance activities to ensure safe execution
• Ensure that maintenance works, and plant equipment comply with Statutory Requirements
• Successful candidate can be appointed as part of the Company Emergency Response Team (CERT) (training will be provided)
• Other ad-hoc duties as assigned

Qualifications & Experience

• Degree in Mechanical engineering
• Minimum 3 years’ experience in a Power Plant environment or oil & gas industry

Key Skills, Competencies & Behaviours

• Organized and detail oriented
• Good Team player and able to deliver results within tight deadlines
• Strong interpersonal, communication and presentation skills
• Proactive in keeping up with new technologies and looking for solutions to optimize plant operations
• Independent with initiatives, resourceful and positive altitude
• Possess good leadership skills
• Good attitudes and willing to learn from experienced people
• Willing to conduct literature researches for problem solving and carry out root cause analysis

1) Promote and propose chiller and equipment to consultants and contractors.

2) Resposible for developing long term customer relationships.

3) Building close business relationship with customers especially key accounts.

4) Maximizing account penetration and customers retention.

5) Identify potential opportunities and develop solutions with existing and new customers.

6) Update timely forecast.

7) Negotiates value, addresses resistance and close sales.

8) Differentiates and made company product as preferred supplier.

9) Ensure all works carried out in accordance with the specified quality and standard requirement.

Duties

• Design, development, building and qualifying of various lab instruments, the major focus on Sample Preparation equipment including our featured FastPrep family (homogenizer).
• Develop and fabricate test equipment in-line with test specifications under the direction and guidance of direct supervisor.
• Execute tests using test equipment that measures temperature, electricity, light, flow, pressure, strain, force, distance, time, noise, weight etc.
• Collect and analyze test data/results, document results and outcomes.
• Support the design and fabrication/assembly of both working and visual prototype models.
• Analyze equipment failures and factory work stoppage problems and provide solutions.
• Fabricates, repairs, improves designs and constructs electro-mechanical equipment.
• Coordinate with external vendors effectively for fabrication and OTS parts procurement.
• Maintains detailed and up to date test data in laboratory notebook and active test logs.
• Support manufacturing ramp up, and design transfer during product development.

Requirement:

• Master's Degree and above in Electrical Engineering or Mechanical Engineering
• 5 years of hands-on Mechanical and Electrical experience.
• Possess broad base of knowledge with understanding and skills in the following areas: Electrical, Electronics, Fabrication, Tool Making, Machining.
• Must be proficient in the use of all hand tools including saws, drills, grinders and other tools.
• Able to operate test equipment that measures temperature, electricity, light, flow, pressure, strain, force, distance, time, noise and weight.
• Can work from prints, sketches, written and verbal instructions.
• Reads wiring/electrical and piping schematics and engineering drawings.
• Electrical experience/training in use of and design of AC and DC circuits.
• Ability to use electrical test equipment and measuring tools necessary.
• Self-motivated, team player with excellent communication and problem solving skills.
• Experience and knowledge of the following areas preferred:

- Rapid Prototyping

- Testing and Design Controls

- Installation

- Design

Description

We are searching for a reliable, deadline-driven Construction Supervisor to oversee construction crews at our company. The Construction Supervisor's responsibilities include recruiting new crew members, monitoring performance and making recommendations for improvement, as well as educating all staff on safety. You should ensure that projects stay within budget and that required materials and equipment are available.

To be successful as a Construction Supervisor, you should demonstrate a sound understanding of safety regulations and building codes and be able to transfer this knowledge to your team. Top-notch Construction Supervisors are leaders who can identify problems and find feasible solutions to them.

Responsibilities:

• Ensuring teams work together to deliver quality work to strict deadlines.
• Monitoring construction processes, and providing training and team building sessions are required.
• Ensuring adherence to health and safety regulations at all times.
• Performing equipment, material, and routine site inspections.
• Scheduling regular meetings with vendors, site inspectors, managers, and staff.
• Writing up reports, budgets, project plans, and presenting them to relevant stakeholders.
• Working closely with architects and other professionals.
• Staying up-to-date with safety codes and advancements in construction.
• Assisting with the recruitment and training of new staff.
• Processing paperwork and traveling to multiple sites as required.
• Finish the given sites on time without fail.
• Need to work anytime with the team under pressure.
• In the urgency of a project need to work on nighttime also without fail.
• Must have the ability to handle multiple works.
• Must maintain stocks in stores.

Requirements:

• Diploma.
• Experience in the construction industry required.
• Experience in a leadership role recommended.
• Valid driver's license.
• Excellent written and verbal communication skills.
• Ability to focus and keep calm under pressure.
• Ability to keep track of multiple projects.

Responsibilities:

• Build and implement CI/CD solutions in AWS environment.
• Automate the code delivery pipeline with the goal of one click deployments, rollbacks, and parameterized builds.
• Build, operate and maintain application infrastructure, infrastructure automation, and monitoring of infrastructure and applications.
• Work with the development team to cross-pollenate DevOps processes and ensure that new architectures are drawn up with “ease of management”, delivery, and operability in mind.
• Troubleshoot application and service issues or system outages while clearly communicating status updates with management and engineering teams.
• Manage scaling of all systems. Participate in an on-call rotation.

Requirements:

• 5+ years of hands on AWS experience.
• Effective communication skills and the ability to work in a fast-paced environment with other DevOps engineers, product managers, developers, etc.
• Strong experience with Docker, AWS ECS or EKS. Strong experience with CI/CD solutiosn using Jenkins/GitHub actions. Strong experience with automation tool - ansible, terraform, Cloudformation.
• Strong scripting experience in Bash, Python, particularly in system automation and monitoring.
• Solid experience in Unix/ Linux administration.
• Solid networking experience within complex environments - load balancing, routing, DNS, network firewalls, and application firewalls.
• Hands on experience with different AWS services - EC2, ASG, ElastiCache, Aurora MySQL, ALB/NLB, S3, Lambda etc.
• Hands on experience with setting logging/monitoring solutions using tools such as CloudWatch, Jaeger, Prometheus, ELK/DataDog etc
• Effective communication skills and the ability to work in a fast-paced environment with other DevOps engineers, product managers, developers, etc.

Commissioning Engineer (Electrical)

Responsibilities:

• Arranges necessary facilities and instruments for jobs such as meters, test kit, temporary preparations, shore generators, and load banks
• Performs testing and commissioning activities, ensuring proper documentation is approved and signed
• Supervises and deploys manpower to execute the operational tasks
• Ensures that electrical equipment and switch boards meet the purchase specifications, and arranges for protection and maintenance of electrical system
• Reviews commissioning work processes to enhance efficiency and productivity
• Liaises with owners, class surveyors and government bodies pertaining to project requirements
• Coordinates the testing and commissioning requirements with Engineering, Project Manager, QA Department and vendors
• Plans and schedules the testing and commissioning requirements on project basis, and organises all logistics requirement for major operations
• Performs any other assigned duties and responsibilities

Requirement

• Min Diploma in Electrical Engineering or related engineering disciplines
• At least 10 years of related work experience
• Possess working experience related to testing of LV/ MV Switch boards and power generators. DCS / ICSS interface for PMS system
• Capable of testing and calibration of Electrical switch board and its components, trouble shooting and clear understanding of system specification and class requirements
• Familiar with the testing procedures and applicable rules and regulations of regulatory bodies
• Be familiar with test memos and manuals

Commissioning Engineer (Instrumentation & Control)

Responsibilities:

• Arranges necessary facilities, tools and instruments for the job
• Performs testing and commissioning activities, ensuring proper documentation is approved and signed
• Supervises and deploys manpower to execute the operational tasks
• Ensures incoming instrument and equipment meet the purchase specifications, and arrange for protection and maintenance of instrument/ equipment and system
• Reviews commissioning work processes to enhance efficiency and productivity.
• Liaises with owners, class surveyors and government bodies pertaining to project requirements.
• Coordinates the testing / commissioning requirements with Engineering, Project Manager, QA Department and vendors.
• Plans and schedules the testing and commissioning requirements on project basis, and organises all logistics requirement for major operations.
• Performs any other assigned duties and responsibilities.

Requirement

• Min Diploma in Instrumentation Engineering or related engineering disciplines
• At least 10 years of related work experience. Possess working experience related to testing and calibration of FPSO/ FLNG instrument. DCS/ ICSS system and Networking knowledge are necessary
• Familiar with the testing procedures, applicable rules and regulations of regulatory bodies.
• Be familiar with test memos and manuals, and coordinate for any required joint inspections.

Our Addresses and Working Hours:

(Tuas Yard)

Pioneer Sector 1, Singapore 628437

(Islandwide transport provided)

Mon - Thur: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte. Ltd. and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Job Description:

• Design electrical control systems for machinery and equipment
• Prepare BOM and participate in procurement and supplier management
• Perform electrical wiring and routing of control panels and machinery
• Responsible for PLC and HMI programs for machinery and equipment
• Ability to troubleshoot, debug and commission control systems of machinery and equipment
• Manage and liaise with project team members and suppliers
• Prepare and present project proposals/updates to internal business owners
• Responsible for value-added engineering projects and contributing ideas for improvement
• Any Ad hoc projects / duties as assigned

Pre-Requisition:

• Minimum Degree in Electrical / Electronic / Mechatronics Engineering
• At least 2 years of relevant experience in electrical design and PLC programming
• Strong in PLC and HMI Programming (Mitsubishi, Omron)
• Skill in Electrical Circuit Drawing and Electrical Panel Design with AutoCAD / Draftsight is preferred
• Robot Programming (Yaskawa, ABB, Fanuc, Nachi)
• Expertise in Labview Programming, C++, Communication Protocols (Ethernet, TCP/IP, RS232, CCLink, DeviceNet) will be advantages
• Preferably knowledge of Electrical Power Systems and Instrumentation Control
• Experience in Machine Vision (2D-3D-Bin Picking) with Robotics Integration will be added advantage
• To travel around Asia Regions if needed

Others:

• Working Location: Bulim Walk (nearest MRT: Boon Lay)
• Mondays - Fridays: 8:00am to 5:30pm
• Uniform & Lunch provided
• Company transportation at various pickup points (Northern & Western areas of Singapore)

Description

We are searching for a reliable, deadline-driven Construction Supervisor to oversee construction crews at our company. The Construction Supervisor's responsibilities include recruiting new crew members, monitoring performance and making recommendations for improvement, as well as educating all staff on safety. You should ensure that projects stay within budget and that required materials and equipment are available.

To be successful as a Construction Supervisor, you should demonstrate a sound understanding of safety regulations and building codes and be able to transfer this knowledge to your team. Top-notch Construction Supervisors are leaders who can identify problems and find feasible solutions to them.

Responsibilities:

• Ensuring teams work together to deliver quality work to strict deadlines.
• Monitoring construction processes, and providing training and team building sessions are required.
• Ensuring adherence to health and safety regulations at all times.
• Performing equipment, material, and routine site inspections.
• Scheduling regular meetings with vendors, site inspectors, managers, and staff.
• Writing up reports, budgets, project plans, and presenting them to relevant stakeholders.
• Working closely with architects and other professionals.
• Staying up-to-date with safety codes and advancements in construction.
• Assisting with the recruitment and training of new staff.
• Processing paperwork and traveling to multiple sites as required.
• Finish the given sites on time without fail.
• Need to work anytime with the team under pressure.
• In the urgency of a project need to work on nighttime also without fail.
• Must have the ability to handle multiple works.
• Must maintain stocks in stores.

Requirements:

• Diploma.
• Experience in the construction industry required.
• Experience in a leadership role recommended.
• Valid driver's license.
• Excellent written and verbal communication skills.
• Ability to focus and keep calm under pressure.
• Ability to keep track of multiple projects.

Key Responsibilities:

• Provide test services and technical advice to customers on cable products
• To interpret test methods/procedures and exercise sound judgement on the methodologies as well as results
• Collaborate with vendors and other departments to resolve engineering issues or testing requirements
• Coordinate with clients, suppliers, and sub-contractors to ensure smooth execution of projects
• Continue to build up technical and engineering expertise in the field of electric cable testing

Key Requirements:

• ITE/Diploma in Electrical/ Electronics/ Mechatronics Engineering or related studies
• Candidates with no prior experience are welcome to apply
• Familiarity with ISO 17025 standards with prior experience in quality control and the test industry will be an added advantage
• Result and service-oriented individuals who possess strong interpersonal and communication skills, with the ability to interact with all levels of staff
• Proactive team player but with the ability to work independently in challenging projects and timelines
• Enthusiastic and resourceful with a “can-do” attitude
• Be prepared to take on short-term travel within ASEAN region

You will be partnered with clients in conducting factory inspections to ensure the quality of their products and processes. The work involves inspecting manufacturing processes on clients’ premises and providing sound recommendations on compliance to standards. The position liaises extensively with internal colleagues from the certification and testing department in delivering one-stop international compliance management service.

Key Responsibilities:

• Conduct factory / project site inspection and perform regular product sampling according to certification requirements
• Review manufacturers' quality management system in accordance with national / international standards
• Generating and issuing audits reports
• Conduct evaluation of inspection and test reports
• Process applications for the certification of fire protection products and materials
• Other duties as assigned by the Supervisor

Key Requirements:

• Degree or Diploma in Building and Estate Management or Mechanical Engineering with at least 3 years of relevant working experience, preferably in quality assurance
• Entry level applicants are welcomed to apply
• Knowledge of ISO 9001, internal auditing, national / international product standards and work experience in building industry will be an added advantage
• Able to multi-task independently and thrive in a fast-paced environment
• Meticulous with ability to handle highly confidential issues as well as communicate effectively with all levels
• Willing to travel overseas for work assignments

Job Responsibilities:

• Develop systems using above technologies.
• Support system developments for automation of IT Governance, Risk, and control (GRC)
• Preferred to have familiarity with Manufacturing.
• Exposure to IT Auditing & Governance policies.
• Must be able to work across different levels of an organization and with IT Auditing stakeholders.
• Support internal audit with computer or IT audits.
• Support data analysis in GRC.
• Any other duties/project assigned.

Job Requirements:

• Degree in information technology/computer information systems/computer science or related.
• Able to do coding for both Client side and Server-side coding using above technologies.Able to perform both Front end & Backend development.
• Understanding of web technology stack, including HTTP, REST, cookies, caching.
• Should be proficient in SQL ERD, SQL queries, Stored procedures, views, and functions.
• Familiar in CI/CD process and experience on any GIT will be an advantage.
• Skills set required with 3 to 5 Years of experience in:

- Visual Studio 2017 to 2022

- SQL Server 2012 till 2019

- C#, ASP.NET, ADO.NET, MVC, Web API, Angular

- JavaScript, jQuery, AJAX

- HTML5, Responsive Design

- LINQ to SQL, coding for Windows Services

Others:

• Working Location: Bulim Walk (nearest MRT: Boon Lay)
• Mondays - Fridays: 8:00am to 5:30pm
• Uniform & Lunch provided
• Company transportation at various pickup points (Northern & Western areas of Singapore)

Carrier Rental Systems is seeking an experienced, energetic, customer-focused individual to join the organization as an Outside Sales Representative to support Singapore area. In this role you will utilize your skills and expertise front facing commercial customers in sales with installing heating and cooling equipment. With your experience where you will sell Rental Solutions including Industrial Chillers, Electric/Diesel Pumps, Air Handlers, Cooling towers, Generators and associated equipment’s.

Key Responsibilities:

As a Sales Engineer, you’ll be responsible for:

• Identifies prospects and establishes a professional relationship to understand the customer needs and suggest products and/or services that meet the customers needs.
• Participates in business development activities for prospects within defined customer segment to support the business strategy.
• Identifies bid opportunities, prepares bid responses, and negotiates with potential customers.
• Develops new customer contact leads for the sales business development team.
• Supports the management team representative on prospective target accounts or territories.
• Develops personal long-term customer relationships with prospective accounts to influence opportunities.
• Attends trade shows at times to increase the visibility of the organization and potentially influence prospects.
• Manage and grow the assigned territory and accounts through the sales of temporary HVAC, Pumps and Power equipment.
• Achieve annual sales targets and promote the growth of rental services while maintaining focus on cash flow management.
• Consult with customer for requirements of emergency and planned rental projects.
• Develop account management skills and provide customers with superior value and service.

Requirements

We are looking for people who are in business development/sales. If this is you, get in touch.

As a minimum you must have:

• Diploma/Degree in Mechanical/Electrical/Electronic Engineering or similar working experience.
• 3+ years of commercial HVAC inside or outside sales experience.
• 1+ years of experience with Microsoft Office.
• Valid driver’s license.
• Rental Industry experience
• SAP / CRM Software experience
• Self-motivated to achieve annual goals and objectives.
• Strong interpersonal skills
• Demonstrated ability to influence customer's key decision-makers.
• Willingness to travel regularly throughout the assigned territory.
• Excellent writing, communication & presentation skills