Responsibilities

• Create design calculations according to stakeholders' and authorities' requirements
• Liaise with client, consultants, main contractor and sub-contractor in design works
• Provide value engineering proposals during tender and ongoing projects
• Coordinate and assist the project team regarding on site works
• Ensure site works are according to the design calculations
• Comply with relevant design code(s) and authorities' requirements in Singapore
• Check through shop drawings and ensure drawings are according to the design calculation
• Submit calculations and necessary submissions to BCA and relevant authorities in order to get approval on time
• Prepare As-built drawings/calculation for submission to the relevant authorities
• Coordinate closely with the project team to ensure that design calculations and drawings are timely met
• Liaise with the client as and when necessary for design clarification
• Timely submission to authorities when required

Requirements

• Degree in Civil/Structural Engineering/Architectural
• Minimum 5 years’ experience in Façade Design/Engineering, Curtain Wall & Aluminium Cladding
• Good sketching skills and an ability to communicate thoughts and technical ideas concisely
• Familiar with Singapore and International Standard design Code and authorities’ requirements
• Good communication skills essential for team-based working
• Highly motivated, proactive and willing to take on new challenges
• Good time management habits and ability to multi-task
• Core interest in the façade industry with emphasis on detailing and engineering
• Analytical problem solving
• Proficient in MS Office suite, AutoCAD and Staadpro

Job Summary

Our client is seeking a Network Engineer(s) to enhance and maintain the network performance service level to ensure the smooth business operations within the organization. You will be responsible to handle the incident response & investigation, working with vendors and the respective teams to efficiently resolve issues within the agreed Service Level Agreement (SLA).

Mandatory Skill-set

• Diploma or Degree in Computer Science, Engineering, Electronics or Information Technology;
• At least 5 years of working experience in managing IT system network operations and support (24x7), service recovery, problem management, risk mitigation and impact assessment;
• Proven track record with over 5 years of hands-on experience in successfully implementing IT infrastructure projects for LAN and WAN environments;
• Proficient in installing and configuring a wide range of network technologies, including LAN, WAN, VoIP, WiFi, wireless controllers, access points, firewalls, security gateways, VPNs, 802.1x protocol, VLANs, and L2/3 switches;
• Skilled in using monitoring, network diagnostic, and network analytics tools to ensure optimal network performance and troubleshoot issues efficiently;
• Excellent communication and interpersonal skills, with the ability to explain technical concepts to non-technical users;
• Strong problem-solving skills and the ability to work independently and collaboratively in a team environment.

Desired Skill-set

• Professional and technical certifications that include CCIE, CCNA, CCDP, CCNP, ITIL, CISSP, AWS Certified Solutions Architect is preferred.

Responsibilities

• Lead and manage the 24/7 network operations, incident handling, maintenance, compliance, and renewal of IT infrastructure systems (Wired/Wireless) to ensure all systems are working in good condition to maintain normal operations;
• Ensure proper project and change management to ensure delivered solutions meet technical, functional, performance and business requirements;
• Responsible to detect signs of abnormality and to report overall system health status to ensure recovery actions, correction actions and preventive measures are in place for every incident reported;
• Be the point of contract to attend to any incident/problem reported and to provide the impact assessments on the outage;
• Work closely with vendors on mitigation measures and assist to resolve the issues and investigation for root cause;
• Maximizing network performance through ongoing monitoring and troubleshooting;
• Ensuring peak network performance through continuous monitoring and effective troubleshooting;
• Scheduling and coordinating network upgrades while investigating network faults;
• Ensuring network equipment is up-to-date with the latest firmware releases;
• Perform system maintenance and deliver regular network status reports to key stakeholders.

Should you be interested in this career opportunity, please send in your updated resume to [email protected] at the earliest.

When you apply, you voluntarily consent to the disclosure, collection and use of your personal data for employment/recruitment and related purposes in accordance with the SCIENTE Group Privacy Policy, a copy of which is published at SCIENTE’s website (https://www.sciente.com/privacy-policy).

Confidentiality is assured, and only shortlisted candidates will be notified for interviews.

EA Licence No. 07C5639

Join Our Team and Shape the Future of the Medical-Aesthetics Industry!

We are a leading medical aesthetics clinic chain with a presence in Singapore, China and Malaysia, operating several clinics and full aesthetic hospital. We are dedicated to providing top-notch skin, wellness, and aesthetic services. As we expand our business, we are looking for a talented Assistant UX Software Designer to join our dynamic team.

About the Role

ClearSK seeks a motivated UI/UX Designer to support our design and development efforts. This role can be either full-time or part-time. The ideal candidate will have a basic understanding of e-commerce solutions, particularly WooCommerce, and will be proficient in various programming languages and tools. You should be able to read, edit, and refine code, even if not coding from scratch.

Job Highlights

• An attractive Salary Package and 5 working days per week.
• Opportunity to work alongside doctors and management.
• Good office environment and convenient location near Novena MRT station.
• Fast-track career path for the fast learner and high performer
• Benefits include a generous package of free medical aesthetics treatments.

Key Responsibilities:

• Create designs for new features for websites and software endpoints.
• Optimize existing user interface and website endpoint designs.
• Work directly with product owners and marketing teams to discuss ideas for implementation.
• Manage and test projects to ensure deliverability of outcomes.
• Design UI/UX for websites and applications.
• Create wireframes, prototypes, and high-fidelity mockups using tools like Sketch, Figma, or Adobe XD.
• Conduct user research and usability testing to inform design decisions.
• Collaborate with cross-functional teams to ensure seamless integration of design and development.
• Optimize designs for SEO and ensure they are responsive and accessible.
• Utilize flowcharts, diagrams, and algorithm tools for visual representation of user flows and system architectures.
• Assist in integrating third-party APIs to enhance functionality and user experience.

Ideal Candidate

• Design Tools: Proficiency in Sketch, Figma, Adobe XD, Axure RP, or Balsamiq.
• Web Development: Basic knowledge of HTML, CSS, JavaScript, PHP, MySQL, and Python.
• E-commerce Platforms: Familiarity with WooCommerce and WordPress.
• Version Control: Basic understanding of Git.
• SEO Best Practices: Basic understanding of SEO principles.
• API Integration: Basic experience with integrating third-party APIs.
• Flowcharts and Diagrams: Ability to use tools like Lucidchart or OmniGraffle.
• User Research: Basic ability to conduct user research and usability testing.
• Communication: Excellent communication and collaboration skills.

Qualifications

• Bachelor's degree in Computer Science, Design, or a related field in reputable universities.
• Minimum of 1 year of experience in UX/UI design and web development.
• Basic experience with WooCommerce and WordPress.
• Strong portfolio showcasing design and development projects.

What We Offer

• An attractive Salary Package with pay of up to $8,000 per month and performance bonus for candidates who fully meet our requirements.
• 5 working days per week; Monday to Friday.
• Opportunity to embark on the Management Trainee Program for career advancement.
• Reward and recognition program that appreciates the most competent and brightest employees.
• Promotion based on performance and achievements.
• Generous package of free medical aesthetics treatments (up to S$6000 per year) selecting from 100+ treatments for full time employees.
• Exclusive staff discounts on our products and services.
• Medical Benefits for full time employees.

Join Us

At ClearSK, we value innovation, excellence, and the continuous pursuit of enhancing beauty and confidence through safe and effective treatments. If you are passionate about making a difference in the aesthetic industry and possess the creative skills and experience we are looking for, we invite you to apply.

If you are a passionate UI/UX Designer with the technical skills to support our e-commerce platforms, we would love to hear from you. Apply now to join our team and contribute to our mission of providing exceptional aesthetic services.

Application process

Should you wish to be considered for shortlisting, please complete the attached Google Form at the link below prior to submitting your application on the job portal:

https://forms.gle/1GUKP1nEwAHxkvnL7

Please be advised that only candidates who have completed the form and are subsequently shortlisted will be notified.

Join Our Team and Shape the Future of the Medical-Aesthetics Industry!

We are a leading medical aesthetics clinic chain with a presence in Singapore, China and Malaysia, operating several clinics and full aesthetic hospital. We are dedicated to providing top-notch skin, wellness, and aesthetic services. As we expand our business, we are looking for a talented Assistant UX Software Designer to join our dynamic team.

About the Role

ClearSK seeks a motivated UI/UX Designer to support our design and development efforts. This role can be either full-time or part-time. The ideal candidate will have a basic understanding of e-commerce solutions, particularly WooCommerce, and will be proficient in various programming languages and tools. You should be able to read, edit, and refine code, even if not coding from scratch.

Job Highlights

• An attractive Salary Package and 5 working days per week.
• Opportunity to work alongside doctors and management.
• Good office environment and convenient location near Novena MRT station.
• Fast-track career path for the fast learner and high performer
• Benefits include a generous package of free medical aesthetics treatments.

Key Responsibilities:

• Create designs for new features for websites and software endpoints.
• Optimize existing user interface and website endpoint designs.
• Work directly with product owners and marketing teams to discuss ideas for implementation.
• Manage and test projects to ensure deliverability of outcomes.
• Design UI/UX for websites and applications.
• Create wireframes, prototypes, and high-fidelity mockups using tools like Sketch, Figma, or Adobe XD.
• Conduct user research and usability testing to inform design decisions.
• Collaborate with cross-functional teams to ensure seamless integration of design and development.
• Optimize designs for SEO and ensure they are responsive and accessible.
• Utilize flowcharts, diagrams, and algorithm tools for visual representation of user flows and system architectures.
• Assist in integrating third-party APIs to enhance functionality and user experience.

Ideal Candidate

• Design Tools: Proficiency in Sketch, Figma, Adobe XD, Axure RP, or Balsamiq.
• Web Development: Basic knowledge of HTML, CSS, JavaScript, PHP, MySQL, and Python.
• E-commerce Platforms: Familiarity with WooCommerce and WordPress.
• Version Control: Basic understanding of Git.
• SEO Best Practices: Basic understanding of SEO principles.
• API Integration: Basic experience with integrating third-party APIs.
• Flowcharts and Diagrams: Ability to use tools like Lucidchart or OmniGraffle.
• User Research: Basic ability to conduct user research and usability testing.
• Communication: Excellent communication and collaboration skills.

Qualifications

• Bachelor's degree in Computer Science, Design, or a related field in reputable universities.
• Minimum of 1 year of experience in UX/UI design and web development.
• Basic experience with WooCommerce and WordPress.
• Strong portfolio showcasing design and development projects.

What We Offer

• An attractive Salary Package with pay of up to $8,000 per month and performance bonus for candidates who fully meet our requirements.
• 5 working days per week; Monday to Friday.
• Opportunity to embark on the Management Trainee Program for career advancement.
• Reward and recognition program that appreciates the most competent and brightest employees.
• Promotion based on performance and achievements.
• Generous package of free medical aesthetics treatments (up to S$6000 per year) selecting from 100+ treatments for full time employees.
• Exclusive staff discounts on our products and services.
• Medical Benefits for full time employees.

Join Us

At ClearSK, we value innovation, excellence, and the continuous pursuit of enhancing beauty and confidence through safe and effective treatments. If you are passionate about making a difference in the aesthetic industry and possess the creative skills and experience we are looking for, we invite you to apply.

If you are a passionate UI/UX Designer with the technical skills to support our e-commerce platforms, we would love to hear from you. Apply now to join our team and contribute to our mission of providing exceptional aesthetic services.

Application process

Should you wish to be considered for shortlisting, please complete the attached Google Form at the link below prior to submitting your application on the job portal:

https://forms.gle/1GUKP1nEwAHxkvnL7

Please be advised that only candidates who have completed the form and are subsequently shortlisted will be notified.

Join Our Team and Shape the Future of the Medical-Aesthetics Industry!

We are a leading medical aesthetics clinic chain with a presence in Singapore, China and Malaysia, operating several clinics and full aesthetic hospital. We are dedicated to providing top-notch skin, wellness, and aesthetic services. As we expand our business, we are looking for a talented Assistant UX Software Designer to join our dynamic team.

About the Role

ClearSK seeks a motivated UI/UX Designer to support our design and development efforts. This role can be either full-time or part-time. The ideal candidate will have a basic understanding of e-commerce solutions, particularly WooCommerce, and will be proficient in various programming languages and tools. You should be able to read, edit, and refine code, even if not coding from scratch.

Job Highlights

• An attractive Salary Package and 5 working days per week.
• Opportunity to work alongside doctors and management.
• Good office environment and convenient location near Novena MRT station.
• Fast-track career path for the fast learner and high performer
• Benefits include a generous package of free medical aesthetics treatments.

Key Responsibilities:

• Create designs for new features for websites and software endpoints.
• Optimize existing user interface and website endpoint designs.
• Work directly with product owners and marketing teams to discuss ideas for implementation.
• Manage and test projects to ensure deliverability of outcomes.
• Design UI/UX for websites and applications.
• Create wireframes, prototypes, and high-fidelity mockups using tools like Sketch, Figma, or Adobe XD.
• Conduct user research and usability testing to inform design decisions.
• Collaborate with cross-functional teams to ensure seamless integration of design and development.
• Optimize designs for SEO and ensure they are responsive and accessible.
• Utilize flowcharts, diagrams, and algorithm tools for visual representation of user flows and system architectures.
• Assist in integrating third-party APIs to enhance functionality and user experience.

Ideal Candidate

• Design Tools: Proficiency in Sketch, Figma, Adobe XD, Axure RP, or Balsamiq.
• Web Development: Basic knowledge of HTML, CSS, JavaScript, PHP, MySQL, and Python.
• E-commerce Platforms: Familiarity with WooCommerce and WordPress.
• Version Control: Basic understanding of Git.
• SEO Best Practices: Basic understanding of SEO principles.
• API Integration: Basic experience with integrating third-party APIs.
• Flowcharts and Diagrams: Ability to use tools like Lucidchart or OmniGraffle.
• User Research: Basic ability to conduct user research and usability testing.
• Communication: Excellent communication and collaboration skills.

Qualifications

• Bachelor's degree in Computer Science, Design, or a related field in reputable universities.
• Minimum of 1 year of experience in UX/UI design and web development.
• Basic experience with WooCommerce and WordPress.
• Strong portfolio showcasing design and development projects.

What We Offer

• An attractive Salary Package with pay of up to $8,000 per month and performance bonus for candidates who fully meet our requirements.
• 5 working days per week; Monday to Friday.
• Opportunity to embark on the Management Trainee Program for career advancement.
• Reward and recognition program that appreciates the most competent and brightest employees.
• Promotion based on performance and achievements.
• Generous package of free medical aesthetics treatments (up to S$6000 per year) selecting from 100+ treatments for full time employees.
• Exclusive staff discounts on our products and services.
• Medical Benefits for full time employees.

Join Us

At ClearSK, we value innovation, excellence, and the continuous pursuit of enhancing beauty and confidence through safe and effective treatments. If you are passionate about making a difference in the aesthetic industry and possess the creative skills and experience we are looking for, we invite you to apply.

If you are a passionate UI/UX Designer with the technical skills to support our e-commerce platforms, we would love to hear from you. Apply now to join our team and contribute to our mission of providing exceptional aesthetic services.

Application process

Should you wish to be considered for shortlisting, please complete the attached Google Form at the link below prior to submitting your application on the job portal:

https://forms.gle/1GUKP1nEwAHxkvnL7

Please be advised that only candidates who have completed the form and are subsequently shortlisted will be notified.

As an ML Engineer, your pivotal role involves operationalizing ML Models developed by Client data scientists. You will serve as the focal point for ML model refactoring, optimization, containerization, deployment, and quality monitoring. Your main responsibilities will include:Conduct reviews for compliance of the ML models in accordance with overall platform governance principles such as versioning, data / model lineage, code best practices and provide feedback to data scientists for potential improvements
Develop pipelines for continuous operation, feedback and monitoring of ML models leveraging best practices from the CI/CD vertical within the MLOps domain. This can include monitoring for data drift, triggering model retraining and setting up rollbacks.
Optimize AI development environments (development, testing, production) for usability, reliability and performance.
Have a strong relationship with the infrastructure and application development team in order to understand the best method of integrating the ML model into enterprise applications (e.g., transforming resulting models into APIs).
Work with data engineers to ensure data storage (data warehouses or data lakes) and data pipelines feeding these repositories and the ML feature or data stores are working as intended.
Evaluate open-source and AI/ML platforms and tools for feasibility of usage and integration from an infrastructure perspective. This also involves staying updated about the newest developments, patches and upgrades to the ML platforms in use by the data science teams.

Technical Skills

Proficiency in Python used both for ML and automation tasks
Good knowledge of Bash and Unix/Linux command-line toolkit is a must-have.
Hands on experience building CI/CD pipelines orchestration by Jenkins, GitLab CI, GitHub Actions or similar tools is a must-have.
Knowledge of OpenShift / Kubernetes is a must-have.
Good understanding of ML libraries such as Panda, NumPy, H2O, or TensorFlow.
Knowledge in the operationalization of Data Science projects (MLOps) using at least one of the popular frameworks or platforms (e.g., Kubeflow, AWS Sagemaker, Google AI Platform, Azure Machine Learning, DataRobot, Dataiku, H2O, or DKube).
Knowledge of Distributed Data Processing framework, such as Spark, or Dask.
Knowledge of Workflow Orchestrator, such as Airflow or Ctrl-M.
Knowledge of Logging and Monitoring tools, such as Splunk and Geneos.
Experience in defining the processes, standards, frameworks, prototypes and toolsets in support of AI and ML development, monitoring, testing and operationalization.
Experience in ML operationalization and orchestration (MLOps) tools, techniques and platforms. This includes scaling delivery of models, managing and governing ML Models, and managing and scaling AI platforms.
Knowledge of cloud platforms (e.g. AWS, GCP) would be an advantage.

Join Us as a Software Engineer (Autonomy) at LionsBot: Be a Pioneer in the Robotic Revolution!

Are you ready to be a game-changer in the cutting-edge world of Industry 4.0? At LionsBot, we're shaking up the traditional cleaning sector with our awesome robotic solutions, tackling manpower shortages head-on. Our innovative bots are already cleaning up in 30 countries around the globe!

At LionsBot, we live and breathe excellence and creativity. Our vibrant, fast-paced environment is like a 'Band of Brothers' where everyone is united by a shared Unicorn goal. If you're ready to embark on a remarkable journey and be part of a team that's making waves, read on!

Responsibilities

• Collaborate closely with engineers across the hardware, perception, localization and mapping teams to deliver high-quality autonomous software stacks that powers next generation cleaning robots.
• Design, implement and deliver application-specific solutions
• Perform sensor calibration and software driver development
• Develop localization, perception and navigation modules of autonomous robots
• Be highly involved in product ideation and brainstorming to apply robotic solution to various appplications
• Produce robust, well-tested C++ software

Qualifications

• Bachelor’s or Master's degree in Computer Science, Electrical Engineering, Robotics, or a related field
• Experience in developing autonomous systems, robotics, or AI applications
• Proficient in relevant programming languages and tools (Python, C++, Java)
• Good understanding of machine learning, control systems, and sensor technologies
• Excellent problem-solving skills and ability to work in a team-oriented environment
• Ability to work collaboratively with cross-functional teams
• Up-to-date knowledge of the latest developments in cleaning robot technology

Ready to Join the Fun?

If you're motivated, creative, and ready to dive into a role that offers global adventures, fast growth, and the chance to make a real impact, we want you! At LionsBot, your ideas matter, your growth is our priority. Jump into the future with LionsBot and be part of something amazing! Apply now by submitting your CV.

Let's make magic happen today!

Job Description

The Construction Project Engineer is responsible for overseeing and coordinating construction projects from inception to completion. This role involves managing project schedules, budgets, and resources, ensuring compliance with safety regulations, and liaising between contractors, clients, and stakeholders to achieve project goals efficiently and effectively.

Key Responsibilities:

• Assist in the development and review of project plans, schedules, and budgets.
• Coordinate with architects, engineers, and contractors to ensure project requirements and specifications are met.
• Monitor project progress and performance, making adjustments as necessary to ensure project milestones and deadlines are met.
• Manage and resolve any issues or conflicts that arise during the construction process.
• Ensure adherence to project specifications, industry standards, and regulatory requirements.
• Conduct regular site inspections to monitor construction quality and compliance with safety regulations.
• Implement and enforce safety protocols to minimize risks and ensure a safe working environment.
• Address and rectify any non-conformance or quality issues in collaboration with the construction team.
• Maintain accurate project documentation, including contracts, change orders, and progress reports.
• Prepare and submit regular project status reports to stakeholders and management.
• Document and manage project changes, ensuring proper approval and integration into project plans.
• Assist in the preparation and management of project budgets, tracking expenditures and ensuring cost control.
• Address client inquiries and concerns promptly and professionally.
• Facilitate meetings and provide updates on project progress and issues.
• Proficiency in CAD software is essential for preparing and reviewing technical drawings and designs.

Job Requirements:

• Candidate must possess at least 3 Years of working experience in the related field
• Posesses Diploma or Degree in Civil Engineering/Construction/Structural or any equivalent
• Preferably Junior Executive specialized in Engineering - Civil/Construction/Structural or equivalent

Job Description

The Construction Project Engineer is responsible for overseeing and coordinating construction projects from inception to completion. This role involves managing project schedules, budgets, and resources, ensuring compliance with safety regulations, and liaising between contractors, clients, and stakeholders to achieve project goals efficiently and effectively.

Key Responsibilities:

• Assist in the development and review of project plans, schedules, and budgets.
• Coordinate with architects, engineers, and contractors to ensure project requirements and specifications are met.
• Monitor project progress and performance, making adjustments as necessary to ensure project milestones and deadlines are met.
• Manage and resolve any issues or conflicts that arise during the construction process.
• Ensure adherence to project specifications, industry standards, and regulatory requirements.
• Conduct regular site inspections to monitor construction quality and compliance with safety regulations.
• Implement and enforce safety protocols to minimize risks and ensure a safe working environment.
• Address and rectify any non-conformance or quality issues in collaboration with the construction team.
• Maintain accurate project documentation, including contracts, change orders, and progress reports.
• Prepare and submit regular project status reports to stakeholders and management.
• Document and manage project changes, ensuring proper approval and integration into project plans.
• Assist in the preparation and management of project budgets, tracking expenditures and ensuring cost control.
• Address client inquiries and concerns promptly and professionally.
• Facilitate meetings and provide updates on project progress and issues.
• Proficiency in CAD software is essential for preparing and reviewing technical drawings and designs.

Job Requirements:

• Candidate must possess at least 3 Years of working experience in the related field
• Posesses Diploma or Degree in Civil Engineering/Construction/Structural or any equivalent
• Preferably Junior Executive specialized in Engineering - Civil/Construction/Structural or equivalent

Job Description

The Structural Design Engineer (Formwork) is responsible for designing and developing formwork solutions used in concrete construction. This role involves creating detailed formwork designs, ensuring they meet structural requirements, safety standards, and project specifications. The designer collaborates with engineers, architects, and construction teams to ensure that formwork systems are efficient, cost-effective, and align with the overall project goals.

Key Responsibilities:

• Develop and create detailed designs for structural formwork systems used in concrete construction.
• Utilize CAD software and other design tools to produce accurate and comprehensive formwork drawings and specifications.
• Ensure formwork designs meet structural integrity, load-bearing capacity, and safety requirements.
• Perform structural analysis and calculations to determine the appropriate formwork solutions for different construction scenarios.
• Assess and select materials and systems that meet the project’s requirements and are cost-effective.
• Evaluate design alternatives and provide recommendations to optimize formwork systems.
• Work closely with structural engineers, architects, and construction teams to integrate formwork designs with overall project plans.
• Participate in project meetings to discuss formwork design issues, updates, and requirements.
• Coordinate with suppliers and manufacturers to ensure that formwork components are available and meet design specifications.
• Ensure that all formwork designs comply with relevant building codes, standards, and regulations.
• Review and verify that formwork systems are constructed and installed according to the approved designs and safety guidelines.
• Conduct site inspections to monitor formwork installation and address any issues or deviations from the design.
• Prepare and maintain accurate documentation for formwork designs, including drawings, specifications, and technical reports.
• Document and track any design changes, variations, or issues, and provide updated information to project stakeholders.
• Provide detailed reports on formwork design performance and any challenges encountered during the design and construction phases.
• Identify and resolve design challenges or issues related to formwork systems during the design and construction phases.
• Develop and implement solutions to overcome obstacles and ensure the successful execution of formwork systems.
• Stay updated with industry trends, new materials, and advanced formwork technologies.
• Propose innovative formwork solutions and improvements to enhance efficiency, safety, and cost-effectiveness.

Job Requirement

• Candidate must possess at least a Diploma/Advanced/Higher/Graduate Diploma in Engineering (Civil) or equivalent.
• At least 4 Years of working experience in the related field.
• Required Skill(s): AutoCAD.
• Preferably Senior Executive specialized in Engineering - Civil/Construction/Structural or equivalent.

Job Description

The Structural Design Engineer (Formwork) is responsible for designing and developing formwork solutions used in concrete construction. This role involves creating detailed formwork designs, ensuring they meet structural requirements, safety standards, and project specifications. The designer collaborates with engineers, architects, and construction teams to ensure that formwork systems are efficient, cost-effective, and align with the overall project goals.

Key Responsibilities:

• Develop and create detailed designs for structural formwork systems used in concrete construction.
• Utilize CAD software and other design tools to produce accurate and comprehensive formwork drawings and specifications.
• Ensure formwork designs meet structural integrity, load-bearing capacity, and safety requirements.
• Perform structural analysis and calculations to determine the appropriate formwork solutions for different construction scenarios.
• Assess and select materials and systems that meet the project’s requirements and are cost-effective.
• Evaluate design alternatives and provide recommendations to optimize formwork systems.
• Work closely with structural engineers, architects, and construction teams to integrate formwork designs with overall project plans.
• Participate in project meetings to discuss formwork design issues, updates, and requirements.
• Coordinate with suppliers and manufacturers to ensure that formwork components are available and meet design specifications.
• Ensure that all formwork designs comply with relevant building codes, standards, and regulations.
• Review and verify that formwork systems are constructed and installed according to the approved designs and safety guidelines.
• Conduct site inspections to monitor formwork installation and address any issues or deviations from the design.
• Prepare and maintain accurate documentation for formwork designs, including drawings, specifications, and technical reports.
• Document and track any design changes, variations, or issues, and provide updated information to project stakeholders.
• Provide detailed reports on formwork design performance and any challenges encountered during the design and construction phases.
• Identify and resolve design challenges or issues related to formwork systems during the design and construction phases.
• Develop and implement solutions to overcome obstacles and ensure the successful execution of formwork systems.
• Stay updated with industry trends, new materials, and advanced formwork technologies.
• Propose innovative formwork solutions and improvements to enhance efficiency, safety, and cost-effectiveness.

Job Requirement

• Candidate must possess at least a Diploma/Advanced/Higher/Graduate Diploma in Engineering (Civil) or equivalent.
• At least 4 Years of working experience in the related field.
• Required Skill(s): AutoCAD.
• Preferably Senior Executive specialized in Engineering - Civil/Construction/Structural or equivalent

About the role

McConnell Dowell is looking to hire Project Engineer / Site Engineer for our civil marine works project in East of Singapore.

Key Responsibilities

• Assisting Senior Project Engineer and Construction Manager with daily site activities.
• Monitoring/reporting site progress (direct employees and subcontract works).
• Formulation of procedures for construction activities.
• Plan the works and develop look-a-head programmes.
• Liaise with the design coordination team to resolve technical discrepancies including preparing and submitting technical queries and meeting with design consultants as required.
• Manage the schedule of shop drawings and monitor the output of drafters.
• Plan the equipment and material requirements and raise purchase requisitions as required.
• Mentor and manage Site Engineers assigned to your zone/works areas.
• Review the authority approvals required ahead of the works and ensure submissions are made such that the clearances can be achieved before works start.

About You

To be considered for this role, you will have;

• Recognized relevant Degree qualifications.
• 5 years of experience in managing civil marine works.
• Strong in communication between cross-functional teams.
• Able to work alternate 6 days work week.
• Transport pickup at Tanah Merah MRT.

If you are interested in adding value and contributing success to building a key infrastructure project, we encourage you to apply for this exciting opportunity with McConnell Dowell.

About Us

McConnell Dowell – Creative Construction

Our purpose is Providing a Better Life. We do that through delivering projects that connect, support and sustain communities, and through providing career opportunities that challenge, reward and grow our people.

From remote major resources and energy projects to city-shaping transport and water infrastructure, we have constructed thousands of high-quality, complex projects for our customers and communities over more than 60 years, in Australia, New Zealand, the Pacific Islands and Southeast Asia.

Why join us?

The work you’ll do will have a tangible positive impact on people’s lives, including yours. The diversity of our projects, roles and locations means greater development opportunities. We invest in our people to set and reach personal and professional goals and we have some of the best mentoring minds in the business to help you do that. Because when you grow, we all grow.

McConnell Dowell actively seeks and celebrates diversity, inclusion, and individuality. In a culture low on ego and high on support, we encourage everyone to make an impact. We're big enough to take on community-shaping projects, but agile enough for you to have an influence on how we do things.

So, join us, be you, and help us create better together. Apply now!

This role is being sourced through McConnell Dowell directly and not accepting applications via external recruitment agencies.

Job Description

The Structural Design Engineer (Formwork) is responsible for designing and developing formwork solutions used in concrete construction. This role involves creating detailed formwork designs, ensuring they meet structural requirements, safety standards, and project specifications. The designer collaborates with engineers, architects, and construction teams to ensure that formwork systems are efficient, cost-effective, and align with the overall project goals.

Key Responsibilities:

• Develop and create detailed designs for structural formwork systems used in concrete construction.
• Utilize CAD software and other design tools to produce accurate and comprehensive formwork drawings and specifications.
• Ensure formwork designs meet structural integrity, load-bearing capacity, and safety requirements.
• Perform structural analysis and calculations to determine the appropriate formwork solutions for different construction scenarios.
• Assess and select materials and systems that meet the project’s requirements and are cost-effective.
• Evaluate design alternatives and provide recommendations to optimize formwork systems.
• Work closely with structural engineers, architects, and construction teams to integrate formwork designs with overall project plans.
• Participate in project meetings to discuss formwork design issues, updates, and requirements.
• Coordinate with suppliers and manufacturers to ensure that formwork components are available and meet design specifications.
• Ensure that all formwork designs comply with relevant building codes, standards, and regulations.
• Review and verify that formwork systems are constructed and installed according to the approved designs and safety guidelines.
• Conduct site inspections to monitor formwork installation and address any issues or deviations from the design.
• Prepare and maintain accurate documentation for formwork designs, including drawings, specifications, and technical reports.
• Document and track any design changes, variations, or issues, and provide updated information to project stakeholders.
• Provide detailed reports on formwork design performance and any challenges encountered during the design and construction phases.
• Identify and resolve design challenges or issues related to formwork systems during the design and construction phases.
• Develop and implement solutions to overcome obstacles and ensure the successful execution of formwork systems.
• Stay updated with industry trends, new materials, and advanced formwork technologies.
• Propose innovative formwork solutions and improvements to enhance efficiency, safety, and cost-effectiveness.

Job Requirement

• Candidate must possess at least a Diploma/Advanced/Higher/Graduate Diploma in Engineering (Civil) or equivalent.
• At least 4 Years of working experience in the related field.
• Required Skill(s): AutoCAD.
• Preferably Senior Executive specialized in Engineering - Civil/Construction/Structural or equivalent.

THE FUTURE IS WHAT WE MAKE IT.

Field Service Engineer (Building Management System)

Changi, Singapore

Start your career by making an impact and real connections with some of the most meaningful challenges around. When you join Honeywell, you become a member of our performance culture comprised of diverse leaders, thinkers, innovators, dreamers, and doers who are changing the future.

Make the Best You.

Working at Honeywell is not just creating incredible things. You will have the opportunity to work with our talented and friendly team of professionals and be part of a global team of future shapers.

Join Us and Make an Impact.

We are currently seeking a Field Service Engineer to join our Building Automation team in Singapore. Reporting to the Senior Field Service Supervisor, your focus will be supporting the development of on-site installation, servicing and repair processes of complex equipment and systems.

KEY RESPONSIBILITIES:

• Take care of maintenance and servicing scope for contract site, with a focus on Building Management System (BMS)
• Validate customer request
• Educate customer and field technicians
• Write documentation used by field technicians
• Ensure Right and Fast Delivery
• Support Managers to delivers the management KPI and ensuring to deliver the Contract requirements and value to Honeywell clients

MUST HAVE:

• Bachelor's degree or higher education with significant relevant experience.
• Minimum 2-3 years of hands-on Field Service and Maintenance experience.
• Knowledge of Building Management System (BMS), and Controller Programming such as Air Handling Unit (AHU), Programmable Logic Controller (PLC), Chiller Programming, etc.
• Willingness to travel to customer's sites island wide.
• Being able to follow flexible work schedule and respond to ad-hoc requests.

WE VALUE:

• A&A Project work experience
• Experience in other domains of Building technologies (Fire Alarm, Security, HVAC, ACMV, etc.)
• Good written and oral communication
• Good presentation skills

About Us
The world is changing. And it’s a familiar story at Honeywell. Our $36 billion business was founded on a legacy of firsts spanning 130 years. We’re building a safer, smarter, and more sustainable world through our technology and software across each of our 930 sites globally. Our impact is seen in every shape and size around the world. Our solutions are felt daily in aerospace, buildings and cities, retail, chemicals and materials, safety, industrial and manufacturing, safety, and supply chains.

Discover More
We’ve been innovating for more than 100 years and now we’re creating what’s next. There’s a lot more available for you to discover. Our solutions, our case studies, our #futureshapers, and so much more. Learn more at careers.honeywell.com/us/en/

If you believe what happens tomorrow is determined by what we do today, you’ll love working at Honeywell.

The future is what we make it. So join us and let’s do this together.

Honeywell is an equal opportunity employer, and we support a diverse workforce. Qualified applicants will be considered without regard to age, race, creed, color, national origin, ancestry, marital status, affectional or sexual orientation, gender identity or expression, disability, nationality, sex, religion, or veteran status. Aboriginal and Torres Strait Islander peoples are encouraged to apply.

Job Description :

• to do conceptual and detailed machine design with regard to mechanical aspects;
• to prepare final design configurations, layouts, solid models, and production/engineering data;
• to prepare solid models, layouts, views, and bills of materials for assigned design machine assemblies and sub-assemblies;
• to exercise cost control when designing machines;
• to install mechanical and electrical components and assemble automated machines;
• to perform machine testing, troubleshooting;
• to prepare machine documentation, specifications, manual;
• to liaise and coordinate with manufacturing and purchasing departments, customers, suppliers about the project, quality, and delivery matters;
• to give suggestions to the Company on how to improve all assigned tasks with regards to efficiency and effectiveness of the same

Job Requirement :

• Degree/Diploma in Mechanical Engineering;
• Minimum 2 years working experience in designing automation systems or machines for the semiconductor, electronics, or solar industry;
• Proficiency with Solid Works is desirable;
• Ability to lead, manage projects and communicate well with customers, vendors, engineers, technicians, and team members.

Job Description

The Construction Project Engineer is responsible for overseeing and coordinating construction projects from inception to completion. This role involves managing project schedules, budgets, and resources, ensuring compliance with safety regulations, and liaising between contractors, clients, and stakeholders to achieve project goals efficiently and effectively.

Key Responsibilities:

• Assist in the development and review of project plans, schedules, and budgets.
• Coordinate with architects, engineers, and contractors to ensure project requirements and specifications are met.
• Monitor project progress and performance, making adjustments as necessary to ensure project milestones and deadlines are met.
• Manage and resolve any issues or conflicts that arise during the construction process.
• Ensure adherence to project specifications, industry standards, and regulatory requirements.
• Conduct regular site inspections to monitor construction quality and compliance with safety regulations.
• Implement and enforce safety protocols to minimize risks and ensure a safe working environment.
• Address and rectify any non-conformance or quality issues in collaboration with the construction team.
• Maintain accurate project documentation, including contracts, change orders, and progress reports.
• Prepare and submit regular project status reports to stakeholders and management.
• Document and manage project changes, ensuring proper approval and integration into project plans.
• Assist in the preparation and management of project budgets, tracking expenditures and ensuring cost control.
• Address client inquiries and concerns promptly and professionally.
• Facilitate meetings and provide updates on project progress and issues.
• Proficiency in CAD software is essential for preparing and reviewing technical drawings and designs.

Job Requirements:

• Candidate must possess at least 3 Years of working experience in the related field
• Posesses Diploma or Degree in Civil Engineering/Construction/Structural or any equivalent
• Preferably Junior Executive specialized in Engineering - Civil/Construction/Structural or equivalent

Salary: Up $3300+OT

Industry: Engineering

Located at Chai Chee

Japanese MNC

Have AWS + Bonus + Yearly increment

Job Description

• Perform, document internal audits and other quality assurance activities to ensure readiness on international standards certification audits and GMP inspection.
• Create, review work instructions and standard operating procedures, devise sampling procedures and directions for recording and reporting quality data.
• Communicating with other team members to solve problems.
• Conduct / perform training to employees to improve GMP / international standards certification awareness and compliance.
• Other duties as and when assigned by management.

Requirements

• Diploma in Engineering
• No experience required
• Able to write simple report

Applications:

Please submit a copy of your updated CV in MS Word format stating to [email protected]:

• Current Salary
• Expected Salary
• Date of Available and Reason for Leaving

All applicant will treated private and confidential

Emily Fong

Senior Talent Specialist

Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443

EA Personnel Reg No.: R1768368

Scope:

• Provide supervision services for all geotechnical works to ensure that contractors complies with contract/authorities'/agencies' requirements
• Oversee the geotechnical team and personnel
• Review all drawings and specifications and highlight any discrepancies, non-workable and/or missing details to OIC and the QP(D)s and QP(S)
• Review and comment on all construction method statements, risk assessmentsfor works, workplans, design for safety (DfS) workshop and SOP proposals
• Provide all relevant endorsements required by authorities/agencies/client
• Assist QPD for application of TOP and CSC
• Prepare site supervision plan and supervise all works directed by OIC
• Monitor project progress to ensure timely completion and prepare necessary site progress and status report for update to client
• Adhere to regulations and requirements of all stakeholders for any supervision work while ensuring proper supervision
• Monitor contractors' safety performance and participate actively in site safety management
• Conduct roving safety inspections, emergency & incident response and facts finding
• Report any accident/incident/near miss on site

Requirements

• Accredited with Resident Engineer certification under Joint Accreditation Committee of the Institution of Engineers Singapore
• Certificate in Workplace Safety and Health Management in Construction Industry Course (bizSAFE Level 2) or equivalent
• Registered as Workplace safety and health officer with MOM
• Minimum 10 years of experience , of which at least 8 years in major construction works in tunnels and deep excavation and foundation
• Conversant with statutory code and requirements for site supervision, quality control procedures, construction administration and submission of progress report
• Strong leadership skills
• Familiar with all procedures in the Workplace Safety & Health Manual

BlueSG is the first and only point to point car sharing service in Singapore, offering a convenient, flexible and affordable mobility option to all, complementing public transport while reducing the need for car ownership. With a 100% electric fleet, BlueSG provides a sustainable transportation solution, eliminating direct carbon dioxide emissions as compared to traditional vehicles.

Join us if you’re passionate about our business, ready to contribute, and resonate with our core values – Collaboration, Curiosity, Customer-Centricity, Empowerment and Respect!

About the Role

As a Fullstack Engineer, you will develop, maintain, and support a complex modern web application (Angular/React/Nest.JS). You will gain experience in the latest concepts, technologies, and modern frameworks such as Typescript, Docker, AWS.

· Work on multiple software engineering projects, both frontend and backend.

· Provide guidance and technical expertise for architecture, and technical decisions on building web applications.

· Raise and document non-functional requirements.

· Unblock the team when complex technical issues arise, using pair programming, conducting RCAs, and getting deep into the codebase.

· Review design, code and write tests to ensure high quality.

· Coach and mentor individuals to grow within the company and improve in both productivity and quality.

· Collaborate within the Engineering team to align technical solutions.

· Collaborate with the Product team to execute the roadmap and ensure a great user experience.

· Identify and escalate potential risks to stakeholders while proposing solutions to address them.

· Perform hands-on coding.

What We’re Looking For

· Bachelor’s degree in Computer Science or the equivalent.

· 4+ years of experience in fullstack engineering.

· 2+ years of hands-on coding experience using Typescript.

· 2+ years working on modern frontend stack (e.g. React, Angular, View).

· Proven expertise in building APIs (e.g. Rest, GraphQL) and complex UI/UX with real-time data and complex state management.

· Proven expertise with Git, Unit Tests and Integration tests.

· Experience with SQL and DB schema.

· Experience with CI/CD pipeline (setup / configuration), Docker and AWS (ECS, SQS, RDS).

· Experience in designing architecture for web application.

· Hands-on experience with agile methodologies (such as SCRUM, TDD, BDD).

· Good knowledge of best practices, software engineering patterns and how to apply them.

Role- Software Developer

The Software Developer shall have at least a Degree in Computer Science, Computer Electrical Engineering or Information Technology/Diploma in Computer Studies, or related discipline, and completed at least three (3) projects using Scrum or equivalent as the Agile software development framework, at least 5 years of experience with agile methodology, and 10 years’ experience as a Software Engineer in the Software Platform involved in the project.
The Software Developer’s experience should include experience in gathering users’ requirements, quantifying and analysing them, design software using “Design Patterns”, and programming using techniques and practices like “Test-Drive Development” or “Pair Programming” and “Secure Coding”. Software Developers who are “Certified Scrum Developer” and attained Cloud certification (e.g. AWS Certified Developer - Associate or equivalent) would be advantageous.
Certified Software Testing Professional and/or Certified Software Quality Analyst or an equivalent certification will be an added advantage

Role:
• Build and implement modern Cloud deployable applications to meet business requirements
• Build, test, deployment of application and integration
• Support user acceptance test planning and execution
• Development and implementation of back-end application in Java with Spring boot on AWS Cloud

Experience:
• 8+ years relevant experience
• Experience in development of scalable architectures using API management, Container orchestration, Microservice frameworks using different tools/ techniques
• Experience with event-based architectures.
• Performs Code reviews
• Experience in working with AWS Cloud-native/AWS managed services

Location: East

Mon to Fri 8am to 5pm

Have AWS & bonus

Hands-on job

Job Requirement

1. Able to do PLC, HMI, programming with Mitsubishi and Omron brand.

2. Experience in handling Mitsubishi and Omron product servo motor products.

3. Understanding and being able to design automation electrical circuits.

4. Hard working and able to work hands on.

Requirements

• Diploma in Engineering
• At least 2 years experience

*Only shortlisted candidates will be notified*

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.

Alternatively, you may also email your resume to us at [email protected]

Emily Fong

Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443
EA Personnel Reg No.: R1768368

Location: East

Mon to Fri 8am to 5pm

Have AWS & bonus

Hands-on job

Job Requirement

1. Able to do PLC, HMI, programming with Mitsubishi and Omron brand.

2. Experience in handling Mitsubishi and Omron product servo motor products.

3. Understanding and being able to design automation electrical circuits.

4. Hard working and able to work hands on.

Requirements

• Diploma in Engineering
• At least 2 years experience

*Only shortlisted candidates will be notified*

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.

Alternatively, you may also email your resume to us at [email protected]

Emily Fong

Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443
EA Personnel Reg No.: R1768368

Job Responsibilities:

Data Configuration:

· Complete the configuration of data for integrated supervisory control systems to ensure smooth operation and integration.

· Customize and develop configuration software, optimize system performance and user experience.

· Propose and implement improvement plans based on feedback to continuously enhance the efficiency of the configuration process.

Quality Control and Testing:

· Diagnose and resolve problems related to site and SDV testing, provide effective solutions and follow-ups.

· Conduct initial testing of configuration projects, fix issues, and ensure outputs meet quality standards and client’s requirements.

Design:

· Analyse the technical requirements and specifications for database and schematics, create and update technical documents.

· Coordinate with team members to develop execution plan and confirm responsibilities.

· Estimate the change requests, and provide technical solutions with minimal cost.

Other Tasks:

· Troubleshooting, deployment on-site, and other tasks assigned by superiors, adapting flexibly to project needs.

Job Requirements:

Technical Skills:

Familiarity with basic Linux systems and proficiency in office software (e.g., Microsoft Office, Suite)

Language Skills:

Excellent communication skills in both English and Chinese. Strong negotiation skills are preferred.

Problem-Solving:

Strong ability to troubleshoot and resolve technical issues.

Attitude:

Willingness to learn new skills, take responsibility for follow-up tasks, communicate with different teams, and handle urgent issues outside regular work hours if needed.

Qualifications:

· Bachelor's degree or higher in Electrical Engineering, Automation, or related fields.

· 1-3 years of relevant work experience. Rail and Industrial Automation sectors are preferred.

· Familiarity with typical communication protocols, SCADA system.

(1) Min-two years experience in mechanical engineering design-related work. Generator/pump actuator. management of the project coasting replated.

(2) Two years experience on-site work.

(3) A driving license is a bonus.

(4) Prefer working experience in Singapore for at least 1 year.

(5) Experience in Autocad / BIM prefer

Japanese MNC

Salary $3000-$5000

Location: Chai Chee

Industry: Electronic Component Manufacturer

Monday to Friday 8am to 5pm

Job Roles

• Work closely with distribution channels
• Coordinate/execute strategies together with Sales/Product Team
• In-charge of Sales cycle including ensuring A/R conditions are met
• Flexible in thinking out of box in managing partners/product strategy

Requirements

• Diploma in any discipline
• Willing to learn & travel oversea (ASEAN region)
• Training provided

Please submit your updated resume in MS format by using the APPLY NOW BUTTON.
Alternatively, you may also email your resume to us at [email protected]

Emily Fong
Senior Talent Specialist
Atomrecruit Pte. Ltd. | MOM EA License No.: 15C7443
EA Personnel Reg No.: R1768368