Position Summary

Independently handling design project and develop naval architecture & hull design.

Provide assistance in enhancing the skills and knowledge of team members to support their professional development.

Tasks and Responsibilities

• Liaise with Owner/ Class/ External Designer for the specific design requirement and provide technical solution.
• Lead team to general conceptual and basic design.
• Design and deliver tailored training programs, provide one-on-one coaching, and ensuring alignment with organizational objectives and industry practices.
• Perform naval architecture calculations such as speed performance prediction, stability/hydrostatic, scantling assessment, weight distribution, launching calculation and etc.
• Responsible for delivering the respective project design drawing and document.

Job Requirements

• Bachelor’s degree in Marine Engineering, Naval Architecture, or a related field.
• Minimum 15 years of relevant work experience in the marine/offshore industry Hull & Hull / Naval Architecture design.
• Good knowledge and skill on coaching and structural/naval architecture design.
• Familiar with GHS/NAPA/FEMAP/Autocad/MS office
• Good communication, analytical skills
• Willingness to learn and adapt to new challenges.

Primary Responsibilities:

• Identify and solve engineering problems as needed
• Support manufacturing/assembly process improvement
• Responsible to uphold electrical safety standards and ensure regulatory compliance

Job Descriptions:

• Prepare and update process check sheets and manuals
• Troubleshoot technical issues and optimize system performance as needed
• Provide technical guidance and mentor Technicians
• Conduct and prepare root analysis and part defect report
• Work with Internal parties and vendor to prevent recurrence
• Liaise with R&D department for engineering change request
• Pre-inspection/inspection on MTC’s Quality Issues
• Prepare electrical inspection test sheet for test and measurement
• Evaluate and implement corrective measure on test result
• Ensure adherence to design specifications, quality standards, and safety protocols
• To carry out or perform tasks / activities, prepare and submit necessary reports to Superior from time to time

Job Requirements:

• Degree/Diploma in Electrical Engineering or equivalent
• Min 3 years experience in machine tool or automation environment
• Experience in CNC Machinery assembly process and automation will be advantageous
• A team player with a sense of responsibility and urgency
• Good interpersonal and communication skills

Expected Start Date: May 2025

Responsibilities:

1. Perform inspection of pressure vessel, piping including stage, final inspection and tank inspections.
2. Perform turn around inspection of pressure vessel, piping and columns.
3. Able to review previous history, ITP, client procedures and NDT reports.
4. Perform corrosion monitoring inspection and coordination with NDT team.
5. Submit daily and weekly reports to client on the inspection findings.
6. Perform QA/QC welding inspections at site.
7. To handle the QA/QC inspection activities in structural fabrication projects, skid manufacturer clients, pressure vessels, pipe spools etc.
8. Knowledge of WPS/PQR and WQT tests.

Job requirements:

1. Must have more than 15 years’ work experience.
2. Must have bachelor or masters degree in mechanical engineering or equivalent.
3. Must have valid API 510 and API 570 Certificate.
4. Must have Welding inspector certificate under AWS-CWI or CSWIP 3.1.
5. Must have NDT level II certificates in MPI, PT, UT and RT.
6. Must have previous shutdown inspection experience.
7. Knowledge in code book like AWS, ASME, API codes.
8. Must have a good knowledge about MT, PT, UT, RT Methods.
9. Must having an inspection experience in Exchanger, pressure vessels, piping and columns.

About our company

We are a leading engineering and construction company based in Singapore. With multifaceted project management capabilities and a strong diverse workforce, we provide a full range of services in engineering, procurement, construction and maintenance of power and industrial plants across the world.

Responsibilities:

• Oversee the installation, calibration, and testing of instrumentation and control systems
• Conduct functional and performance tests for instrumentation and control systems
• Identify and troubleshoot issues during commissioning and ensure timely resolution
• Collaborate with engineering and construction teams to ensure seamless integration of systems
• Prepare and maintain accurate documentation and reports related to commissioning activities
• Ensure compliance with safety standards and protocols
• Any other duties to be assigned from time to time

Pre-requsites:

• Bachelor's degree in Electrical, Instrumentation, or a related engineering field.
• Minimum 5 years of experience in commissioning instrumentation and control systems in power plant or industrial projects
• Strong knowledge of control systems, instrumentation and DCS
• Excellent troubleshooting and problem-solving skills
• Ability to work in a team environment and communicate effectively
• Project Location: Jurong Island (Transport will be provided at designated pick-up points)

About GlobalFoundries

GlobalFoundries is a leading full-service semiconductor foundry providing a unique combination of design, development, and fabrication services to some of the world’s most inspired technology companies. With a global manufacturing footprint spanning three continents, GlobalFoundries makes possible the technologies and systems that transform industries and give customers the power to shape their markets. For more information, visit www.gf.com.

Introduction:

GFIT team in GlobalFoundries has a primary mission of delivering data engineering, advanced analytics, and process control applications that advance our Smart Manufacturing effort. We are involved in the entire application lifecycle from concept to deployment.

Your Job:

• Motivated and tech savvy IT to join APC (Advanced Process Control) team.
• Developing R2R controller test suite, troubleshooting software issues and supporting our internal team with daily technical needs.
• You will work closely with the R2R control team (both Singapore and Dresden) to gain exposure to system administration across different applications (R2R, PCL, Setup.FC).

Other Responsibilities:

• Perform all activities in a safe and responsible manner and support all Environmental, Health, Safety & Security requirements and programs

Required Qualifications:

• Prefer but not limited to a degree in IT, Computer Science, Engineering or related field.
• Strong problem-solving and analytical skills.
• Good communication and interpersonal skills
• Ability to work well in a team environment and take direction from senior staff.

Preferred Qualifications:

• TCL
• Java/ SQL

Responsibilities:

• Identifies, troubleshoot problems and performs root cause analysis study of equipment failures, recurring breakdown, and equipment defects in order to take effective corrective and preventive
• Liaises closely with Engineering on technical specifications required for machinery fitting, documenting the project requirements for the arrangement of machinery, equipment and system installation work
• Assists with the preparation of procedures, risk assessment, HSE work method statement and etc. under the supervision of senior team members and Project Manager to ensure all the requirements have been fulfilled
• Prepares job-list, work schedule and planning of manpower resources (i.e. yard and contractors) and facilities, working closely with the team members
• Participates in project meeting with Project team members and stakeholders to note on project specifications and report on the status of the work progress
• Liaises closely with HSE department and subcontractors for proper on-site coordination, working with QA/QC team members, owners, statutory and classification authorities on inspection arrangement and compliance review
• Maintains the equipment/ machineries at the workshop and on-board, ensuring the proper working condition, timely calibration, repair, or servicing as required
• Understands emerging engineering practices by participating in educational opportunities, professional organisations; reading professional publications and maintaining personal networks
• Recommends changes to work method/ process by reviewing the workflow and work process to implement changes for improvement and to achieve operational effectiveness and functionality

Requirements:

• Bachelor’s degree in Mechanical Engineering/ Marine Engineering or related engineering disciplines
• Entry Level candidates are welcome to apply (On Job Training will be provided)
• Excellent proficiency in English (written and spoken)
• Must be able to board ships, enter confined spaces with limited visibility and have the ability to climb up and down stairs and/or ladders of varying heights.
• Good in planning, organizing, and interpersonal skills and able to work independently

Working hours & locations:

(Tuas Boulevard Yard)

80 Tuas South Boulevard, Singapore 637051

(Islandwide Transport provided)

Mon - Thur: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte. Ltd. and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Job Description & Requirements

Job Responsibilities :

• Preparation of document for presentations.
• Attending site visit for tendering project and project management.
• Involve in solving construction issues raised by construction teams
• Other duties assigned from time to time.

Job Requirements :

• Degree in Civil / Structural Engineering recognized by BCA and preferably recognizes by Professional Engineering Board, Singapore.
• At least 5 years of relevant experience preferred
• Familiar with AutoCAD, Microsoft word, Excel and Project
• Familiar with latest code of practice as per BCA requirement

• To provide technical support to Project and Installation to verify report and coordinate over job site issues and provide technical solutions related to electrical design.
• To involve in design interfacing and parts provision.
• To participate in resolution of design problems related to Error/Trouble investigation, formulate corrective and preventive measures.
• To provide engineering support to Marketing and Sales staff for new products.
• Prior experience/ knowledge in Electrical Design Work.
• Proficiency in AUTO-CAD.
• Computer literate and systems savvy.
• Maintain systems and component capabilities through rigorous testing, track cutting-edge trends, search for ways to improve functionality and efficiency, and implement appropriate segments to keep production methods current
• Prepare comprehensive documentation for all electrical designs, including wiring diagrams and schematics, bills of materials, assembly drawings, design changes, test reports, design-validation plans, and reports ensuring that installations and operations conform to standards and customer requirements

Analyze customer and project requirements, and provide technical guidance and recommendations to project teams and stakeholders

● Develop and implement testing and validation protocols to ensure that electrical systems and equipment meet or exceed industry standards and regulations

● Collaborate with other engineers, project managers, and stakeholders to ensure that projects are completed on time, within budget, and to the highest quality standards

● Stay up-to-date with industry trends, technologies, and best practices in electrical engineering, and recommend new tools and techniques as needed

Resposibilities:

• Receive customer enquiries through customer portal or email.
• Download, update, and monitor customer product Bill of Material (BOM), drawings, and specifications and its revisions.
• Prepare Sales quotation/proposal/tender documents during RFQ/quotation stage.
• Check and ensure compliance to all specifications prior to providing customer the proposal.
• Calculate material, machining, cladding and other associated costs to quotations.
• Ensure quotations submitted are competitive and maintain a good profit margin.
• Follow-up on proposals with clients to secure orders.
• Prepare and distribute a Sales Order Job Launch when customer awards Purchase orders.
• Project Management on active Sales Orders and delivery schedules.
• Manage and build customer relationships and improve customer satisfaction.
• Coordinate with other departments to compile and submit documentations as required (e.g. pre-production/ final product documentations, concessions/non-conformances)
• Establish positive communications with customers regularly.

Requirements:

• Diploma/Bachelor’s Degree in Mechanical Engineering or related
• Highly motivated and driven
• Strong interpersonal and communication skills
• Team player
• Analytical, resourceful, and possess problem-solving capabilities
• Willing to undertake ad-hoc project assignments and be able to multi-task
• Proficient with MS Office tools
• Knowledge/interest in oilfield components and equipment will be an added advantage

What's in it for you?

• Bespoke training and development programs
• Fun & open working culture
• Staff parties and company events
• Recreation room - pool table, karaoke system, board games, gaming consoles
• On-site gym facilities
• Accessibility (2-mins walk from MRT)

· Prepare detailed design reports, calculations and drawings.

· Prepare submissions to statutory agencies/ authorities.

· Participate in the coordination with other disciplines in preparation of design deliveries.

· Participate in preparing tender documentations.

· Participate in the successful delivery of projects.

· Perform any other duties as assigned.

Requirements:

· Degree in Civil or Structural Engineering from a recognized University and eligible for registration with the Professional Engineers Board (Singapore).

· Conversant with local codes and authority submission procedures.

· Excellent interpersonal, good written and verbal communication skills.

· Have good knowledge of common engineering design software.

· Working experience in engineering design consulting practice on building, geotechnical, infrastructure, rail or road projects (underground/basement/elevated structures, tunnel structures and MRT station structures).

· Strong analytical skills.

· Able to work under pressure with good time management skill.

If you wish to have the opportunity to work in an international consultancy firm that offers attractive remuneration, a 5-day work week and a conducive environment to enhance your skills and experience, please send your full resume, including your salary expectations and contact telephone number to

2 International Business Park, #06-08

The Strategy, Tower 1, Singapore 609930

Email: [email protected]

(Only shortlisted candidates will be notified)

Job Description

• Reports Construction Manager
• To assist in site supervision works
• Coordinate internally with inter-department and externally with clients & consultants
• Coordinating for the project planning, documentation and execution of works on site
• Coordination, supervision & monitoring the progress of the project works on site, manpower mobilization, materials planning & ordering
• Coordinate with the contractor, suppliers on all project implementation issues and attend site meetings when required
• Coordinate for all submission
• Produce weekly site progress report and necessary submission
• Attend meetings, conduct site inspection on work progress to ensure quality control in accordance to meet authority requirements.

Job Requirement

• Degree in Civil Engineering or equivalent
• At least 6 years of working experience in the related field is required
• Having experiences in LTA Project would be bonus and advantageous
• Independent with good communication skill
• Good organizational and planning skills
• Effective communication and coordination skills and team work
• Able to work independently and in a team
• Able to start immediately or within a short notice period will have added advantage
• Willing to work in site office

• Assist Program Manager in managing program-related issues and correspondences. Monitor and track progress on program activities.

• Coordinate and work with tool and assembly equipment suppliers to ensure smooth program launches.

• Design workflows and optimize production layouts in collaboration with the production department to improve machine efficiency.

• Source and gather tooling and component quotations from suppliers for initial project startups.

• Work on new quotations and packaging requirements for new parts.

• Support production and quality departments in troubleshooting processing and quality issues related to plastic parts.

• Provide timely customer support and respond to customer inquiries.

• Update all tooling activities, bills of materials, and project review records

• Coordinate all mold trial activities. Prepare periodic tool-life reports for customers.

• Design and collaborate with suppliers on jigs and fixtures required for secondary processes.

Requirements:

• Diploma/Degree in Mechanical Engineering

• Minimum 3 years relevant experience and preference to those with experiences in managing healthcare/medical products

• Good knowledge of project management and production process. Knowledge of plastics molding or toolings will be advantageous

• Good knowledge of project management & production process

• IT Skills (MS Office)

• Good communication, organizational and planning abilities

• Independent, good initiative and able to multi-task in a fast-paced environment

• Office: Pioneer/Joo Koon | Mon – Fri (8:30am to 5:45pm)

• Monthly salary x 13 + Variable Bonus. Monthly salary will commensurate according to experiences

• Candidates who can start immediately or short notice preferred

We invite interested and qualified candidates to send in your updated resume (MS Word Format), stating your reasons for leaving each employment, your current and expected salary to [email protected] and cc [email protected]. Please indicate the position you are applying in your email subject. Your interest will be treated with strict confidentiality,

We regret to inform that only shortlisted candidates will be notified

EA License: 90C3627

EA Reg No: R1108020

• Responsible for 3D product design and its requirements

• Lead in Mechanical and Engineering Design for Process Development or Product Design or Engineering solutions

• Create proof of concepts

• Generate engineering drawing with proper GD&T and Tolerance Stack up

• Define test requirements needed for all the designed products

• Perform Patent search for possible design infringement

• Drive Projects with tight timeline

• Any other duties as and when assigned

• Take reasonable care of workplace health and safety; abide by all EHS policies and procedures; cooperate with Management and colleagues in EHS initiatives

Requirements:

• Diploma/Bachelor Degree in Mechanical / Industrial Engineering

• 2-3 years of relevant experience

• Good exposure in Plastic Injection molded parts design

• Knowledge of product design, engineering plastics behavior, product certification

• Knowledge of CAE simulation will be an added advantage

• Competent in Engineering calculations

• Hands on 3D CAD & CAE experience

• Good problem-solving skills with strong technical acumen

• Location: Pioneer/Joo Koon| Mondays to Fridays (8:30am to 5:45pm)

• Monthly salary x 13 + Variable Bonus. Monthly salary will commensurate according to experiences

We invite interested and qualified candidates to send in your updated resume (MS Word Format), stating your reasons for leaving each employment, your current and expected salary to [email protected] and cc [email protected]. Please indicate the position you are applying in your email subject. Your interest will be treated with strict confidentiality,

We regret to inform that only shortlisted candidates will be notified

EA License: 90C3627

EA Reg No: R1108020

· Review & upgrade existing automated production lines via root cause analysis for continuously improvement to meet production new requirement.

· Create, prepare, update automation project documentation, procedures & drawings of Gantt chart, weekly progress report, process / equipment flow chart, validation list, buy off/FAT/SAT (Factory / Site Acceptance Test) procedure, mechanical assembly & layout drawing, electrical diagram & wiring, I/O list, co-robot & PLC program, SOP (Standard Operation Procedure), WI (Work Instruction) & PM (preventive maintenance) check list.

· Attention to details of design concepts, provide most cost-effective technical solutions in line with customer and company needs.

· Update & back up automation system documentation, procedures, drawings, software, co-robot & PLC programming timely.

· Coordinate with internal team (BD, QC, production, maintenance) and external supplier to make projects successful.

· Prepare machines preventive maintenance check list and training operation & maintenance staffs. Service & troubleshooting machines when requested.

· Adhere to plant safety, food safety, sanitation standards and following all GMP guidelines.

· Take reasonable care of workplace health and safety; abide by all EHS policies and procedures; cooperate with Management and colleagues in EHS initiatives

· Collaborates with suppliers and machine maker to complete all FAT and SAT requirements within the delivery date.

· Perform Lean principle (5S, Gemba-walk, 5-why and B&A suggestion improvements)

· Any other duties when assigned by management

Requirements:

· Diploma / Degree of Engineering in Automation / Mechatronics / Mechanical / Electrical or equivalent.

· Previous 3-6 years’ experience as a validation engineer or in a similar role.

· Strong understanding of automation engineering system design concept & development, manufacturing processes and safety regulations.

· Excellent mathematical and analytical skills. Attention to detail.

· Knowledge of statistical software analysis (e.g., MINITAB, MATLAB)

· Well versed in Microsoft office tools (Excel/ Word / Power point)

· Have knowhow in Process Failure Mode Effect Analysis (PFMEA) and CPK study.

· Attention to details and eager to learn new technology.

· Location: Pioneer/Joo Koon| Mondays to Fridays (8:30am to 5:45pm)

· Monthly salary x 13 + Variable Bonus. Monthly salary will commensurate according to experiences

We invite interested and qualified candidates to send in your updated resume (MS Word Format), stating your reasons for leaving each employment, your current and expected salary to [email protected] and cc [email protected]. Please indicate the position you are applying in your email subject. Your interest will be treated with strict confidentiality,

We regret to inform that only shortlisted candidates will be notified

EA License: 90C3627

EA Reg No: R1108020

Responsibilities

Prepare project management plan and its sub-plans, such as: work scope statement, schedule plan, manpower plan, tools and equipment plan, procurement plan and OHSE plan

• Provide engineering support in project or plant maintenance • Coordinate internal and external audit review

• Engineering calculations associated with current carrying capacity of cables, wires, fuses and other circuit protective devices.

• Procedures for inspection, testing and certification of electrical fixed installations.

• Industrial hazards, safety and health precautions, and environmental concerns.

• Installation practice and regulations, and relevant codes of practice.

Requirements & Professional Skills•

Min. Diploma in Electrical Engineering or equivalent

Min. 0-1 year of relevant experience in electrical work

SPECIFIC RESPONSIBILITIES:

• ensures all drawings, bills of materials, purchase requisitions and quality checks are completed as per project schedule and ISO 9001 & 14001 processes.
• conducts design reviews to analyze specifications, sketches, drawings, ideas, and related data to assess factors affecting component designs and the procedures and instructions to be followed.
• confers with customer representatives to review specifications and answer questions pertaining to installation of systems.
• supports during manufacturing, assembly, de-bug, and customer buy-off.
• writes technical reports, manuals and technical support documentation
• performs a wide variety of additional functions to meet project schedules and product deliveries
• reads, understands, and acts upon mechanical drawings including piece part and assembly drawings, work instructions, and procedures
• determines manufacturing methods, techniques, and procedures as required to perform tasks as required for to ensure designs perform as required
• designs test fixtures and setups as needs arise
• communicates with vendors to support procurement and to address issues
• Responsible for any other role as assigned by the Project Manager

QUALIFICATIONS & EXPERIENCE:

• Diploma or Degree in Mechanical / Manufacturing Engineering or an equivalent degree in related technical field desired
• 3 to 5 years relevant experience in mechanical engineering and material handling systems across various industries.
• AutoCAD and solid works proficiency
• Knowledge of design techniques, tools, and principle involved in production of precision technical drawings, and models
• Knowledge of the practical application of engineering science and technology. This includes applying principles, techniques, procedures, and equipment to design and production
• Knowledge of design principles, steel and aluminum part creation, sub assembly and pneumatics.
• Ability to work independently in designing and liaising with customers on technical specifications and requirements
• Participate in and effectively communicate in group discussions and meetings
• Ability to work well in a team environment
• MS Office proficiency

RF Unit

• Disassemble Signal generator unit and Calibrate the unit according to SOP
• Troubleshooting and repair of PCB assemblies
• Soldering work and board rework on HD, surface-mount PCB assemblies
• Provide necessary fault information and repair records for work carried out
• Knowledge of handling different test and measuring equipment, LCR meter and Oscilloscope
• Complete repair job in a timely manner
• Maintain SOP documents required for daily repair/rework operation

• 5 days, Tuas, Transport provided
• Hybrid work arrangement after probation period
• Lots of learning opportunties
• $4000 - $4500 basic, AWS
• Allowances, performance bonus

Administrative Support:

• Manage customer orders and data in ERP systems.
• Ensure timely reporting to stakeholders and maintain accurate records.

Sales and Customer Support:

• Provide solutions and technical advice to customers.
• Evaluate customer requirements and ensure compliance with company terms and conditions.
• Coordinate cost estimations and timelines for deliveries.

Order Management:

• Oversee order handling, ensuring timely delivery and accurate reporting.
• Coordinate with supply chain teams for logistics and transportation.

Teamwork and Innovation:

• Identify process improvements and support the development of innovative solutions.
• Foster collaboration among departments.

Quality Control:

• Inspect products to meet quality standards and customer expectations.

Requirements:

• Possess minimum a Diploma in Engineering or Supply Chain Management
• Minimum 2-3 years of relevant experience in Engineering, Marine/Oil & gas environment
• Strong knowledge of parts sourcing, order processing, and client engagement.
• Ability to manage delivery and invoicing efficiently.
• Responsible and with positive attitude

Interested applicants, please send your resume to [email protected]

MOM License 16C7883 | Reg No. R1109186

• 5 days, Tuas, Transport provided
• $3500 - $5500 basic salary, AWS, performance bonus
• Allowances, career growth
• Good learning environment

Main Purpose of Role:

Responsible for the installation, commissioning, testing, and servicing of equipment throughout its lifecycle. Ensure the delivery of high-quality, fit-for-purpose equipment and services while meeting client expectations.

Responsibilities:

• Diagnose problems or malfunctions in equipment, assess service requests, and perform technical interventions such as repairs, maintenance, or replacements.
• Carry out commissioning and testing of installations or components in line with project requirements, protocols, and safety regulations.
• Ensure seamless field service operations by handling technical, logistical, and administrative tasks. This includes documentation management, planning, and communication.
• Perform disassembly and assembly of equipment, including physically intensive tasks. Engage in machining activities such as drilling, sawing, or welding.
• Adhere to health and safety standards while ensuring project timelines and goals are met.

Requirements:

• Possess a Degree in Engineering
• Minimum 2-3 years of relevant experience as Service Engineer, preferably in cranes or wire ropes)
• Candidates with no experience can apply as on-the-job training is provided
• Prior experience in equipment servicing or manufacturing is an advantage
• Client-oriented mindset, Strong planning and organizational skills
• Progress monitoring and follow-through
• Adaptability in dynamic environments
• Effective problem analysis and resolution
• Self-motivated, team player, and able to work independently
• The role involves physically demanding tasks and may require travelling to client sites

Interested applicants, please send your resume to [email protected]

MOM License 16C7883 | Reg No. R1109186

Responsibilities:

• Liaise with consultants, clients, and subcontractors on M&E progress.
• Manage material, equipment, and manpower for economic usage.
• Oversee receipt, transfer, and control of M&E materials.
• Enforce occupational health and safety procedures.
• Ensure compliance with permit-to-work system.
• Follow QA/QC procedures and CONQUAS standards.
• Prepare daily progress reports.
• Ensure work progress aligns with schedule.
• Supervise work according to contract drawings and specifications.
• Coordinate/prepare technical submissions with suppliers/subcontractors.
• Prepare method statements, shop drawings, and related documents.
• Assist in updating site work status report.
• Help Project Manager with M&E Master Construction and T&C Schedule.
• Liaise with relevant authorities on submissions, inspections, testing, and commissioning.
• Resolve technical/site issues through discussions with stakeholders.
• Perform ad-hoc duties as assigned by Management.

Requirements:

• Bachelor's Degree in Mechanical Engineering or equivalent.
• Minimum of 1 year of working experience in the construction industry.

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Create mixed-signal verification and coverage strategies tailored to complex IC designs, aligning with design architecture and specifications.
• Construct verification testbenches using standard verification languages and methodologies, ensuring comprehensive coverage.
• Author and execute test cases to validate mixed-signal circuits, focusing on functionality, performance, and reliability.
• Analyze verification results meticulously, offering constructive feedback to design teams for improvements.
• Collaborate closely with design and layout teams to pinpoint and resolve any design issues encountered during verification.
• Innovate and refine verification methodologies, tools, and techniques to enhance scalability and portability.
• Provide final sign-off on mixed-signal designs, ensuring readiness for tape-out.

Requirements:

• Bachelor’s degree in electrical & electronic or equivalents and with minimum 7 years of working experience.
• Proficient in analog and mixed-signal circuit design and verification principles.
• Capability to formulate test plans, deliver presentations on findings, and communicate effectively with cross-functional teams.
• Familiarity with verification methodologies and tools including simulators, waveform viewers, automated execution, simulation time optimization, and coverage analysis.
• Proficient in programming abilities, capable of crafting efficient scripts or programs in languages such as Perl, Python, and/or C.

__________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Assist Project Manager with project functions, including project management, site management, and risk control to achieve project goals.
• Support Project Manager in planning and coordinating construction works according to the master and detailed work programs.
• Guide junior Engineers in daily work execution.
• Prepare and submit project documents such as schedules, method statements, design plans, risk assessments, and reports.
• Supervise construction to ensure compliance with contract specifications, drawings, quality standards, and ESH practices.
• Coordinate and liaise with clients, authorities, consultants, subcontractors, and suppliers on all project matters.
• Facilitate site inspections, submit technical reports, and maintain records. Assist in verifying progress payments and contractor claims.
• Attend regular meetings with clients, consultants, and contractors to monitor project progress.
• Establish and maintain a document control system for design drawings and project documents.

Requirements:

• Bachelor’s degree in Civil Engineering recognized by the Professional Engineer Board.
• At least 3 years of working experience in construction and infrastructure industry (LTA, Roadwaorks, MRT Projects).

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

Responsibilities:

• Manage internal and external excursions (MRB or Quality Claims).
• Oversee customer data reporting.
• Conduct quality-related training sessions.
• Support customer surveys and audits.
• Lead continuous improvement activities.
• Perform other ad hoc duties as assigned.

Requirements:

• Degree in Engineering or equivalent.
• Preferably knowledgeable in Statistical Process Control (SPC) and statistical techniques.
• Auditing experience is a plus.
• Understanding of system flow and databases is an added advantage.

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

• West, 5 days, Transport provided to & fro
• Basic salary: $3500 - $4800, 1mth AWS, performance bonus
• Medical/dental benefits
• No experience can apply
• On-the-job training is provided

Responsibilities:

• Review engineering drawings and execute experiments, calculations, and statistical controls for new products/processes.
• Drive engineering activities to enhance manufacturing and supply chain operations.
• Ensure manufacturing processes meet quality, cost, and delivery targets.
• Troubleshoot and redesign production processes for cleanroom and non-cleanroom operations.
• Support qualification and setup of new materials, recipes, and system applications.
• Identify and implement process improvements for future requirements.
• Conduct equipment and material validations (IQ, OQ, PQ methodology).
• Source suppliers, qualify specifications, and estimate costs for projects.
• Support new business projects and implement technologies.
• Train and build technical capabilities within the department.

Requirements:

• Diploma or Degree in Mechanical Engineering, Industrial Engineering, Manufacturing Engineering, Electrical Engineering, Materials Science, or Process Engineering.
• 1-2 years of relevant experience.
• Candidates with no experience can apply as on-the-job training is provided.
• Understanding of end-to-end processes in manufacturing and supply chain engineering.
• Knowledge of manufacturing systems (e.g., CAD, ERP) and workflow simulation tools.
• Experience with statistical process control and applying ISO standards (ISO13485, GDPMS).
• 
  
• Strong project management and presentation skills.
• Self-motivated, resourceful, and analytical.

Interested applicants, please send your resume to [email protected]

MOM License 16C7883 | Reg No. R1109186

Responsibilities:

• Manage internal and external excursions (MRB or Quality Claims).
• Oversee customer data reporting.
• Conduct quality-related training sessions.
• Support customer surveys and audits.
• Lead continuous improvement activities.
• Perform other ad hoc duties as assigned.

Requirements:

• Degree in Engineering or equivalent.
• Preferably knowledgeable in Statistical Process Control (SPC) and statistical techniques.
• Auditing experience is a plus.
• Understanding of system flow and databases is an added advantage.

______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628