Job Description:

• Design FA project inclusive of tooling, artwork, material and process.
• Draft drawing for making of tooling and artwork.
• Liaise with suppliers regarding the making of tooling and artwork.
• Create job ticket which consists of material and process.
• Co-ordinate FA run with FA report submission
• Co-ordinate product transfer from US to Singapore facility.
• Develop and fabricate test jig/tool for testing of functionality of finish product.
• Maintain all test jig/ tool used in production.
• Perform product failure analysis, as well as reduce cost through yield improvement, cycle time reduction and process enhancement.
• Coordinate the Engineering Change Notice (ECN) process.
• Putting up sales quotation for the customer through the sales department.
• Any other task assigned

Requirements:

• Diploma in Electrical / Electronics / Mechanical or Microelectronics Engineering.
• Knowledge of 3D modeling software such as Pro/Engineer and AutoCAD.
• Need to be flexible on working hours as support over the weekends may be required.
• Must be a self-motivated team player with good presentation and communication skills
• Good project and time management capabilities

Responsibilities:

• Designs, plans, and handles testing, commissioning, software programming and supervision on site for BMS on project plan, specifications, and contract documents.
• Analyses plans, specifications, and contract to determine project requirements.
• Prepares submittals containing schematics, descriptions and technical literature as required. Maintains current design documents throughout project duration.
• Prepares engineering re-estimate reports and minimizes report variances.
• Perform testing & commissioning of BMS.
• HVAC experience and sequence of preparation for BMS
• Experience in BMS technical submittals preparation, method of statement, compliance statement and OMM.
• Experience in IO point schedules, assignments and materials selection with value engineering
• With logical knowledge in ACMV & HVAC system control logic.
• Network and MS office & project background knowledge is a must.
• Be aware of all kinds of risks and their controls in your work environment.
• Be a part of site EHS inspections, hazard/ risk assessments and recommend mitigation measures.
• Immediately inform the site EHS officer/site manager of any additional EHS risks.
  Stop the work if any unsafe conditions are identified.
• Project management skill required.

Requirements:

• Degree/ Diploma in Mechanical/ Electrical engineering or its equivalent

• Min 2 years related experience in HVAC/ BAS industry

• Strong customer management & problem solving skills

• Excellent communication & interpersonal skills

Addcel has been delivering deep value to clients across the Oil and Gas, Petrochemical, Energy, Pharmaceutical, Data Centers, Environmental Solutions and Infrastructure industries since 2010.

Specialising in Design & Building of utility systems, prefabrication/ DFMA works, facility & plant maintenance and construction implementation such as structural steel, piping, storage tanks & silos as well as the equipment installation, we take pride and passion in all that we do.

The Project Engineer reports to the Project Manager and is responsible for the below:

• Prepare and submit required documents for Project, working with respective stack holders based on project proposal.
• Prepare and maintain the project document summary.
• Upon confirmation of project resources, update other stakeholders to prepare submission and record for final MDR.
• Prepare and follow up with Engineering and drawing related documents.
• Receive, review, update and issue latest revised drawing to project team.
• Prepare and monitor STQ / RFI for technical details.
• Preparation and updating of project schedule.
• Prepare and update Regular reports and Project Forecast.
• Base on approved layout and schematic drawings, prepare and update MTO upon approval from client.
• Escalate any abnormalities compared to bidding quantity to PM and procurement team.
• Update the revised MTO (material take off) to project team, ensuring material availability as well as manpower resources.
• Attend daily toolbox meeting.
• Update Project managers about the progress, plans and challenges.
• Assist in the preparation of the complete subcontract Scope of Work.
• Work with all stakeholders to ensure that we have the latest equipment connection drawings.
• Prepare, monitor and update status to procurement, and submit monthly progress claim.
• Record additional works and variation orders.
• Prepare variation claim with proposal team.

To be a good fit, you would possess these qualities and skills

• Bachelor’s degree in Engineering or equivalent.
• Min. 3 - 5 years of relevant working experience, preferably managing projects for Semi-con, Pharma & Oil & Gas.
• Proficient knowledge in AutoCAD software & Microsoft Office.
• Able to work independently and as a team with good prioritization skills.
• Good time management.
• Good communication skills, both verbal and written.
• Enjoy challenging yourself in a fast pace environment.

Join us in adding value everyway and creating value everyday with pride and with passion!

Responsibilities:

· You will promote and propose Trane Chiller & Equipment to building consultants and contractors

· Responsible for developing long term customer relationships

· Building close business relationship with customers especially key accounts

· Maximizing account penetration and customer retention

· Identify potential opportunities & develop solutions with existing & new customers

· Update forecast timely into the system

· Negotiates value, addresses resistance, and close the sales. Differentiates & made Trane as preferred supplier

· Any other duties as assigned from time to time

· You also need to ensure all works carried out in accordance with the specified quality and EHS standards.

Requirement:

· Degree in Mechanical/ Electrical engineering or its equivalent

· 1-2 years in Engineering sales, experience in HVAC industry will be a plus

· Customer driven with excellent communication & interpersonal skills

· Candidates with the relevant education qualifications but no prior work experience is welcome to apply

Responsibilities:

• Promote and propose Trane Controls Solutions to building owners, consultants and contractors

• Develop long term customer relationships and maximize account penetration and customer retention

• Identify potential opportunities & develop solutions with existing & new customers

• Work closely with other department to promote package solution and enhance the win rate

• Ability to effectively writes and presents proposals.

• Negotiates value, addresses resistance and closes the sale. Differentiates & made Trane as preferred supplier.

• Ensure all works carried out in accordance with the specified quality and EHS standards.

Requirements:

• Diploma/ Degree in Mechanical/ Electrical engineering or its equivalent

• At least 1-3 years’ experience in selling HVAC or building automation system

• Good presentation, interpersonal and communication skills

• Customer driven mindset

Job Description

· Responsible for ensuring that assigned projects meet customer’s specs, strictly follow procedures and schedules

· Communicate and coordinate effectively with all relevant internal & external team members including contractors to ensure efficient completion of projects

· Review work procedures and highlight activities which may cause interruptions on the projects

· Closely supervise all contractors to execute tools services hook-up activities, ensure safety regulations practiced and monitor work quality performance

· Maintaining and modifying equipment to ensure that it is safe, reliable and efficient

· Liaise with clients on services requirement, schedule, reports and progress claims

· All other ad-hoc assignments assigned by Project Manager

Qualification

· Degree /Diploma in Mechanical Engineering

· At least 2 years of working experience

· Proficiency in Microsoft Project and Microsoft office and AutoCAD

· Highly analytical, meticulous, proactive and self-driven

· Strong team-player with excellent interpersonal and communication skills

· Able to work under pressure and in fast-paced environment

· Able to work collaboratively with others

· Able to start immediately

· Able to read and interpret P&ID.

About the role

This position involves applying knowledge in engineering and science to design & develop scale up processes in the laboratory and future production of our aerogel line of products. Successful candidate will be given a fulfilling role to work in the company’s state of the art platform technology, ASPIRe. As a valuable member of the team, you will be involved in every aspect of the development from infancy to the implementation

Process Engineer

Locations: 8 Cleantech Loop, #08-37 Singapore 637145 .CleanTech 3

Working Days: 5 days a week

Time: 9 - 6 pm

Basic Salary ranges from $4500 to $5500 (Depending on qualifications and experience).

Other benefits include transport allowance and basic medical coverage, annual leave, paternity/maternity and compassionate leave.

Roles & Responsibilities

• Assist Production Manager in the daily running of production department.
• Design and develop the pilot process plant for upscale production.
• Develop product testing protocols and procedures based on product specifications to test and determine the full operating profiles.
• Lead in troubleshooting of process equipment and machinery when required
• Assess processing suitability according to varying criteria including performance, ease of manufacturing, reproducibility, and scalability
• Consolidate operating parameters and other observations in a clear and structured format/template
• Develop framework and manage safety records such as SOP, SWP, GMP and RAM.
• Work closely with the formulations and product development team to achieve optimization in processes in terms of efficiency and cost.
• Carry out quality control for in-house development and customer samples
• Work closely with business team and customers/industry partner for pilot trials, implement their feedback and improve existing product to achieve customer specification.
• Development of a suitable manufacturing process for the product formulation.
• Production of sample batch in lab scale and pilot scale.
• Responsible for effective technology transfer and upscaling to commercial scale batches
• Work closely with other departments to validate manufacturing methods for production scale batches.
• Train production personnel on manufacturing processes.
• Trouble-shooting in the process matrix for routine production.
• Maintain and document quality records with regards to processing units and machinery.
• To establish and maintain Good Manufacturing Practices for all commercial projects.
• Mentor and manage junior staff.
• Prepare progress update and presentations
• To ensure all GMP quality related records are kept properly

Requirements

• Have a Bachelors / Masters in chemical engineering, mechanical engineering, industrial engineering or a related field
• Have knowledge on process design software such as CHEMCAD, CHEMPRO, AspenPlus and/or other related software.
• Have a good knowledge of industrial processes and best practices in chemical plants.
• Have a good knowledge in HVAC systems
• Self-directed learner, ambitious with desire to succeed and positive attitude towards learning
• Experience in coatings/paint would be advantageous.
• Good knowledge of chemical handling.
• Project Management expertise

To apply:

You can apply directly by sending your cover letter and resume directly to [email protected] quoting ‘process engineer’ in the subject line. In the CV/resume, outline why you would be the best fit for this job, date of availability, residential status in Singapore, details of your educational background and work experience.

Job Description

1. Help implement "Green" initiatives to align with Company's sustainability and eco-friendly strategies.
2. Ensure compliance with mandatoy regulations regarding water polution, recycling and waste disposal.
3. Collect and analyse environmental data.
4. Be familiar with business requirements that requires, compliance with Enviromental Product Declaration,
ISO 14025 and Environmental, Social and Governance factors.
5. Help determine ways to prevent, control and correct environmental health hazards.
6. Maintain records and help manage Company's consumption of electrical and water resources.
7. Familiarity with company's effort in keeping pace in complying with Façade productss specifications
concerning Design for disassembly, use of recycled materials, circular economy, materials with low carbon
emission with sustainable characteristics.
8. Create reports about company's environmental impact.

Position Requirements

Bachelors Degree In Environmental Engineering

Tasks

Designing systems and processes to minimize pollution and waste

IMPORTANT

You may use the link to submit your job application

https://sy.seikowall-idd.com/TH6/public/hr/recruitment/eform_v1.xhtml?comp=SWPL

Responsibilities:

• Perform servicing of Trane chillers & other HVAC equipment
• Carry out corrective and preventive maintenance for chillers and related equipment
• Have basic knowledge of overhaul & start up jobs on Trane chillers
• Liaising with customers to resolve complaints cases
• Coordination with vendors and contractors in job coordination
• Assist or involve in schedule planning & prepare technical analysis reports for management’s review
• Ensure all works carried out in accordance with the specified quality and EHS standards
• Any other duties as deemed necessary from times to times

Requirements:

• NITEC/ Diploma/ Degree in Mechanical, Electrical, Electronic Engineering or equivalent
• Relevant experience in Chiller Systems/ Air-conditioning
• Positive attitude

Job Descriptions:

• Collaborates with the commercial/business development team to develop innovative and competitive technical solutions for bidding projects.
• Prepares detailed technical method statements, drawings, and integrated service and equipment solutions to meet project requirements.
• Reviews and understands bidding employer’s requirement documents, project specifications, and process data.
• Translates employer requirements into effective contractor solutions that align with project goals.
• Monitors market trends to ensure tender documents remain competitive and relevant, making necessary adjustments.
• Implements improvements in the tender process to enhance the company’s market position and competitiveness.
• Works closely with various department stakeholders to gather necessary information for bidding proposals.
• Consolidates and integrates collected information into comprehensive bid proposals.
• Conducts internal reporting of tender solutions to secure management approval for bid submissions.
• Provides timely and accurate updates on bid progress to the tender manager.
• Supports the tender manager in developing commercial bid solutions and engaging with the market as required.
• Support engineering budget (estimation) and cost control.
• Participates in market visits to assess and incorporate subcontractor solutions into the company’s proposals.
• Evaluates subcontractor technical solutions to ensure alignment with project requirements and company standards.
• Integrates subcontractor solutions into the company’s bid proposals effectively.

Requirements:

• Minimum Diploma or Bachelor’s degree in engineering, or a related field.
• Prior experience and knowledge in offshore wind projects is highly desirable and will be given preference.
• Proven experience in technical solution development, preferably within a commercial/business development context.
• Strong understanding of bidding processes, tender documentation, and market trends.
• Excellent analytical skills and attention to detail.
• Effective communication and collaboration skills to work with cross-functional teams.
• Ability to manage multiple projects and meet tight deadlines

Job Description

• Monitor, track, and provide timely project progress reports to the management
• Report to Project Manager / Site Manager for the arrangement of work
• Prepare the specification and data sheet as per codes / standards, project, and client’s requirement,
• Responsible of the submission and approval of materials in compliance to the specification;
• Responsible monitoring of work progress on site
• Co-ordinate the inspection work on site and installation works
• Handling technical and engineering problems on site
• Ensure site safety and proper execution of site work procedure on site
• Monitor and co-ordinate the works of subcontractors

Requirements

• Degree or Diploma in Mechanical Engineering / Building / Project Management or equivalent.
• Min. 2 years relevant working experience in the construction industry (building facade).
• Strong leadership, organizational, planning, and interpersonal skills.
• Good working attitude with a high level of professionalism, integrity, initiative, and being a team player.
• Knowledge and/or experience in contractual management is an added advantage.

IMPORTANT

You may use the link to submit your job application

https://sy.seikowall-idd.com/TH6/public/hr/recruitment/eform_v1.xhtml?comp=SWPL

Job Description:

Technical Support:

• Respond to and resolve IT support requests via phone, email or ticketing system
• Diagnose and troubleshoot hardware, software and network issues
• Install, configure and maintain computer systems and software applications

Hardware and Software Management:

• Manage the setup and maintenance of laptops, printers and other IT equipment
• Perform regular updates, patches and upgrades to ensure optimal performance and security

Network Support:

• Assist in maintaining LAN/WAN connectivity, Wi-Fi setups and VPN configurations
• Identify and resolve network related problems, including internet outages and connectivity issues

Incident and Problem Management:

• Log and track issues using a Service Desk Management tool
• Escalate unresolved problems to higher-level support teams or vendors
• Follow-up to ensure timely resolution of incidents

Security Compliance:

• Support adherence to IT security policies and procedures
• Assist with data backups and cybersecurity measures
• Maintain an accurate record of all service assets and configurations

Job Requirements:

• Applicant MUST meet these minimum qualifications to be considered an applicant
• Minimum 5 years of IT support or equivalent experience
• BS in Computer Science, Information Technology, or related field or equivalent experience preferred
• Experience in administration of Microsoft technologies such as Active Directory, Office 365, SharePoint
• Familiarity with networking fundamentals (TCP/IP, DNS, DHCP)
• To possess relevant certification with ITIL frameworks; Microsoft Certified
• Strong problem-solving and analytical skills
• Excellent communication and interpersonal abilities
• Pleasant attitude, approachable and friendly demeanor
• Ability to manage time and multitask effectively
• Patience and adaptability in handling technical issues and working with users of varying technical proficiency

Responsibilities:

• Ensure proper risk assessment is in place to provide a safe working environment for workforce by periodically reviewing risks and hazards associated to workplace, executing control measures and communicate effectively to workforce.
• Respond to technical queries from subordinates to account for timely project completion by consulting relevant parties such as mould loft and engineering department for practical solution.
• Monitor quality of welding and NDT completion on end products to prevent carry over work to next station by preforming on site checks and reviewing NDT records.
• Set daily targets for workforce to achieve to account for timely project completion by monitoring daily output and conducting daily reviews of the results.
• Study production drawings to spot possible mistakes or possible fabrication issues to ensure production schedule can be met without unexpected delays by detailed discussion and review of drawings with technical staffs.
• Prepare weekly report on progress and KPI to ensure project progress in on track by monitoring block status and compiling production progress data from site.
• Identify bottlenecks to ensure no unexpected delays to project progress by conducting meetings with subordinates, analyzing weekly reports and formulate optimal production flows for any issues identified.
• Review manpower allocation and effectiveness to ensure project progress is on track by analyzing daily and weekly KPI against progress, discussing with managers should additional manpower or reallocation of manpower is needed.
• Performs supervision on site to ensure fabrication work have been safely executed accordingly to drawings and quality requirements to account for timely project completion by checks on the floor, communicating and getting feedback from workforce.
• Identify the production capacity and plan station schedule to ensure accordance to sequence by comparing to hullshop master schedule and hullshop historical productivity data.
• Set the KPI and manpower allocation for each station to achieve required schedule by analyzing workforce and facilities capabilities and historical date and previous projects.
• Study project requirements, identify any gap that exists with current hullshop practices and propose recommendations to close the gaps to ensure no unexpected delays to project schedule by conducting reviews and meetings with QA and QC personnel.
• Ensure Standard Operation Procedures (SOP) in place so that work can be performed according to project requirements by communicating SOP's to workforce.
• Determine block fabrication sequence to ensure most effective way to fabricate blocks by analyzing drawing and 3D model and holding discussion with production and mould loft team.
• Ensure proper lifting plan is available for blocks to account for safe block lifting by advising engineering lifting team on block fabrication method in advance.
• Review subordinates competency to ensure effectiveness in performing work by analyzing productivity data, non conformance received and feedback from QA, QC and clients.
• Take active role in Incident Investigation to find root cause and proper preventive measures are implemented by conducting interviews with injured person(s) and witnesses, analyzing accident scenes and other investigative processes together with HSE Team.
• Propose training required by workforce to prevent shortfall in certain roles by compiling workforce skills and comparing with production requirements.
• Participate in Safety Innovation Programs by actively contributing to department Safety Innovation Team

JOB REQUIREMENTS

Requirements:

• Degree in Engineering
• At least 3 years of relevant working experience, preferably in marine/ offshore industry
• Knowledge of functional and operational requirements related to design of all types of ships and offshore vessels
• Knowledge and experience of his engineering field
• Knowledge of regulatory and class requirements
• Able to read and understand engineering drawings
• Possess good communication and interpersonal skills
• Possess supervisory skill to coach and motivate staff
• Able to work in a team
• Proficient in Microsoft Office and engineering design software (e.g. Tribon, GEMS)

Seatrium - Tuas Boulevard Yard

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

WE NEED EXPERICEND FOR METAL WOKS , ALUMINMUM WORKS , WETRADE WORKS AND TILES WORKS FOR CONSTRUCTION (HDB / CONDO ) , NEED HAVE EXCELLENT IN CHINESE AND ENGLISH COMMICATION SKLII AND ACKNOWLEGE DESIGN WORK ,NEED TO GO THROUGH WITH SITE COODINATOR FOR BQ AND MATERAILS ORDER AND DRWAING SUBMISSION WORKS ，ALLOW TO FOLLOW AND COORDINATE WITH SITE WORKS AND PROGRESS WITH MAINCON , SITE MEETING

Job Description

• Carry out troubleshooting and corrective action of instrument breakdown or failures to find out the root cause and best solution in order to restore the functionality get back to normal
• Respond to technical queries from operation personnel and provide advice/solution according to best engineering practice to address issues which affect the operation of the power plant
• Follow C&I work instructions and propose changes for improvement where necessary
• Lead the execution of shutdown works for instrumentation to ensure completion of shutdown work on time
• Work closely with various sections to coordinate cross-functional maintenance works
• Perform risk assessment prior to start of work and conduct on-job risk assessment to identify residual risks associated with the planned/unplanned work
• Monitor spare parts and inventory for critical instrumentation to ensure availability when required in order to minimize unplanned outages. Establish new inventory/cataloging where necessary. Update information in the inventory to ensure that it is relevant for the current operation.
• Provide technical inputs in full cycle of procurement processes for materials and service requisition where required so that all technical requirements are addressed properly to protect company’s interest
• Identify, study, propose, and implement area for improvement in the field of instrumentation engineering to enhance operation and improve overall equipment reliability
• Supervise on-site contractors/additional supplier’s C&I technician(s) as well as C&I vendors to perform site works, review their work procedures and instructions to ensure compliance to achieve highest quality of work in a safe manner
• Participate actively in any meeting, discussion and initiative by team which is relevant to the job role and business needs in order to safeguard company’s interest
• Populate inputs into the Computerized Materials and Maintenance Management System (CMMS) to ensure data and history of equipment maintenance activities are captured accurately. Provide inputs to Planning Engineer with regard to instrument maintenance activities for consolidation

Job Requirements

• Possess a degree in Instrumentation and Control Engineering or Electronics and Electrical Engineering with at least three (3) years of working experience in the instrumentation field, or a diploma in the same fields with at least seven (7) years of working experience in instrumentation field
• Proficient in the codes and standards in the power plant industry i.e. BSI, ISO27001, ANSI, IEC, IEEE, etc.
• Strong interpersonal skills, a team player and able to work with all levels of management and multinational staff
• Hands-on experience in field instrumentation and sensors of different makes
• Proficient in power plant DCS and HMI systems, specifically experience with ABB Advant DCS, GE Alspa DCS will be an advantage
• Proficient in any power plant PLC control system
• Proficient in the P&ID, loop diagram, process functional flow diagram and familiar with gas turbine / steam turbine operations and protection concepts
• Cyber security knowledge in Operation Technology will be an added advantage

Job Description & Requirements

1. Conducts field inspection and verify conformance to approved specifications.
2. Conducts inspection on the installation of product such as AHU etc.
3. Prepare and review documents for project close-out requirements.
4. Conducts in-house orientation on company policies and procedures to employees in preparation for their incorporation to company.
5. Supervise the implementation of punch list (balance of works) issued by client to conform to the established client standards and specifications.
6. Prepare QC inspection reports and monthly accomplishment reports.
7. Proper checklist and progress report must be generated.
8. Conducts line checking on installed items, issue punch list and verify accomplishment prior to endorsement for testing.
9. Conducts pre-qualification of welders for pipe welding works.
10. Conducts inspection on installation of fans and blowers including pre-fabrication and initial testing.
11. Prepare inspection reports for accepted and rejected activities.
12. Conducts receiving inspection on critical materials prior to installation.
13. Attend to coordination meetings and address problems concerning installation problems.
14. Generate Non-conformance reports to activities not conforming to project specifications and monitor detailed action plans for close-out.
15. Prepare and maintain quality manual for the organization.
16. Generate work instructions, company procedures for use by the organization and submission to client.
17. Conduct and prepare analysis of generated NCRs, complaints, and audit results.
18. Arrange with third party inspectors for necessary testing.
19. Implement quality system to the project.
20. Arrange materials documentation requirements and submits to Client Inspection Department for acceptance.
21. Prepare Quality Inspection and Test Plan (ITP) for submission to clients.
22. Review Mill Test Certificates. (For Production Related Works only).
23. Setting QA compliance objectives and ensuring that targets are achieved.
24. Maintaining awareness of the business context and company profitability, including budgetary control issues.
25. Assessing the product specifications of the company and its suppliers, and comparing with customer requirements.
26. Working with purchasing staff to establish quality requirements from external suppliers.
27. Considering the application of environmental and health and safety standards.
28. Agreeing standards and establishing clearly defined quality methods for staff to apply.
29. Defining quality procedures in conjunction with operating staff.
30. Setting up and maintaining controls and documentation procedures.
31. Ensuring tests and procedures are properly understood, carried out and evaluated and that product modifications are investigated if necessary.
32. Supervising technical staff in carrying out tests and checks.
33. Bringing together staff of different disciplines and driving the group to plan, formulate and agree comprehensive quality procedures.
34. Persuading reluctant staff to change their way of working to incorporate quality methods.
35. All QC items must be reported to the Operations manager.
36. Establishing standards of service for customers or clients.
37. Establish and define Standards and Procedure of development requirements for the Product.
38. Formulate, implement and review work procedures to ensure effectiveness and efficiency to meet quality requirements.
39. Evaluate according to ISO requirements and actively provide constructive feedback to development team.
40. Establish and maintain high quality test procedures and methods to be used in present and future software and hardware testing and development that comply with the company quality standards and deliverables.
41. Prepare the requirements for components and / or assembled parts of the incoming inspections.
42. Oversee quality tests and qualify the release of products at the manufacturing side.
43. Oversee the resolution of quality-related problems in the development and manufacturing environment resulting from supply or production imperfections.

REQUIREMENT

1. Diploma in Mechanical Engineering related discipline

2. At least 2 years of related work experience in quality control

3. Good office coordination skill and interpersonal skill.

4. Independent and resourceful.

5. Knowledgeable in ISO documents preparation.

ST Engineering is a global technology, defence and engineering group with offices across Asia, Europe, the Middle East and the U.S., serving customers in more than 100 countries. The Group uses technology and innovation to solve real-world problems and improve lives. Our dedication to excellence and our strong track record have earned us a distinctive reputation for quality and trust as a global technology, defence and engineering group, spanning across the aerospace, smart city, defence and public security segments. Headquartered in Singapore, ST Engineering ranks among the largest companies listed on the Singapore Exchange.

Join our Cyber Team

We are an industry leader in cybersecurity with over two decades of experience, we deliver a holistic suite of trusted cybersecurity solutions to empower cyber resilience for government and ministries, critical infrastructures, and commercial enterprises. Backed by our indigenous capabilities and deep domain expertise, we offer robust cyber-secure products and services in cryptography, cybersecurity engineering, digital authentication, SCADA protection, audit and compliance.

Join our team of highly motivated individuals in the engineering cutting edge solutions that unify both cybersecurity and productivity. As our Cyber Security Product Engineer, you will join a team of specialised engineers to deploy, configure and support our indigenous and robustness cybersecurity products.

Job Description

• Participate in the product and project implementation and coordinate new installations, designs and migrations for security technology and solutions.
• Understand customer’s requirements and transform to technical control & technical solution
• Install, configure and upgrade Cyber Security Products
• Troubleshooting, diagnosing and resolving hardware, software, and other network and system problems on the customer's site
• Liaise with vendors and internal team for resolution solutioning for problems encountered.
• Monitor compliance to applicable codes, best practices, security standards and specifications for the delivery of security technology and solutions.
• Work within established configuration and change management policies to ensure awareness, approval and success of changes made to the ICT infrastructure.
• Cooperate and communicate effectively with project manager and coordinate with other project participants to deliver functional solutions and provide assistance and technical support.
• Create and maintain technical documentation for reference and reporting.
• Create, oversee and test system integration and security requirements (e.g. system integration test plan, system security acceptance test plan).
• Review findings from vulnerability assessment and penetration testing.
• You will learn system and cyber security knowledge with the team.

Requirements

• Possess 5-7 years of similar experience
• Familiar with cyber security products and project implementation
• Possess networking knowledge
• Possess basic knowledge in Linux
• Soft skills – Problem Solving, Communication and Teamwork Skills
• Singaporean only
• Work location: Jurong East

Find out more: https://www.stengg.com/cybersecurity

ST Engineering believes in fostering a culture where team members are encouraged to overcome challenges, explore new ideas, and work together to succeed. We value individuals who are determined to push beyond the boundaries, and have a thirst for knowledge, continuous learning, and self-improvement.

Job Requirements

1) To Work as lead Engineer for Oil & Gas Project

2) Leading a Team of Electrical Engineers in Preparation & Review of Load lists, Single Line diagram of PCC, PMCC, MCC, DB's, Equipment Sizing Calculation, System Study through ETAP (Version 19.1) and Preparation & Review of Layouts like Hazardous Area classification, Lighting Layout, Cable and Power Layout, Substation Equipment layout, Earthing & Lightning protection Layout.

3) Interface Management with Lead Engineers, Client, Contractors, Vendors, Government Agencies and Certification agencies

4) Preparation, Monitoring and Control Engineering Document Control List and expedite for delay/ approvals/resolution of open issues

5) Review and Ensures that all works are carried out in accordance with project specification. Maintain Design integrity and quality within the Project Engineering Team

6) Preparing Engineering schedule and Engineering man hours estimation to meet project requirements.

7) Preparation of Material Requisition, Specifications, Technical Bid Evaluation for Electrical works.

8) Preparation and Compliance for Engineering Audit Requirements.

9) Job assignments, Mentoring and Supervision of works for Designers and Design Engineers.

10) Technical assistance to construction activities and attending to Site Queries.

11)Reviewing Vendor Drawings for Transformers, Switchgears, Cables, Distribution Boards, Junction Box, LCS, Motors etc.

12) FEED & Pre-Bid works which involves Feasibility study & MTO estimation works.

13) Coordination with PMC / QP and Construction Coordination.

14) Participates in discipline and inter-discipline design check and screening meetings for compatibility, completeness and correctness in works

15) Inspecting various equipment like LV & MV Bus duct, LV & MV Switchgear, Cables, Transformer, AC / DC UPS

16) Field Engineering Support Activities to complete the task in accordance with the project schedule.

17) To be proactive in creating a safe working environment for everyone and ensuring that HSE in-house rules are observed at all times.

18) To consider HSE aspects when planning and carrying out tasks to eliminate and reduce HSE hazards, aspects and risks.

Qualification

Preferably Bachelors’ Degree in Electrical Engineering

Experience

Preferably Minimum 15 years of experience

Software Requirements

ETAP, DIALUX, Auto cad, MS Excel, MS Word

JOB HIGHLIGHTS

· Cutting Edge Internet-of-Things and AI Technologies

· Open Source and Maker Culture

· Friendly Working Environment

JOB DESCRIPTION

· Realtek is one of the leading fabless semiconductor design companies in the world, with this position, you will get to play a role in value-add to the latest Realtek wireless communication IC product line.

· You will develop software and firmware for the state-of-the-art Internet-of-Things microcontrollers, writing tools, automation, and build systems.

· You will also work closely with the hardware, driver, test, and marketing team to be exposed to the entire product designing cycle.

· You will have the chance to prototype your ideas and make them public through social media, workshops, and events.

· You will be able to follow the latest tech trend and learn new skills when working with cutting-edge technologies.

ROLES & RESPONSIBILITIES

· Be a part of a team that maintains, implements, and validates embedded software for Realtek's latest IoT SoCs

· Design application-level middleware to simplify the customer development process

· Port new features, capabilities, and platforms to Realtek IoT SoCs

· Prototype innovative IoT applications using various network protocols, tools, and open source software

· Debug and fix peripheral, wireless connectivity(Bluetooth, Wi-Fi, etc.), and network-level issues

· Collaborate with third parties for hardware and software projects (ARM, SeeedStudio, Sparkfun, Adafruit, AI-Thinker...)

· Online & offline event organization with groups, institutes, and local universities

· Content creation and social media marketing strategy based on Realtek IoT solutions

· Community management and customer support

JOB REQUIREMENTS

· Bachelor’s degree or above in Computer Engineering, Electrical Engineering, or other related majors

· Fresh graduates are welcome to apply

· Experience with C/C++ and a scripting language(Python/Bash/etc.) is a must

· Experience with embedded system drivers, peripherals, computer networks, wireless connectivities, and open source development platforms (Arduino, PlatformIO, etc.)

· Experience with TinyML and/or AIoT-related development is a bonus

· Experience with video editing and content creation

· Willingness to learn new technologies and ability to follow the latest software and electronics trend

· Good Communication and Teamwork Skills

Role Summary:
As a Process Engineer, you will oversee machine operations and ensure that all preparations are conducted aseptically before production begins. You will coordinate between technicians and maintenance staff to ensure smooth operations and effective teamwork.

Key Responsibilities:
• Oversee daily machine schedules, production targets, and machine maintenance.
• Resolve worker issues and coordinate activities to meet company goals.
• Train new employees on equipment operation and safety procedures.
• Maintain ISO9001, ISO13485, and GMP documentation standards.
• Ensure workplace safety and cleanliness.
• Drive continuous improvement in quality and process efficiency.

Requirements:
• Diploma / Degree in mechanical , chemical engineering field with 1-3 years of relevant working experience.
• Planning experience is an advantage.
• Open to work shift working hour

How to Apply:
Interested candidates, please submit your updated resume by using Quick Apply button
We regret to inform that only shortlisted candidates will be informed.

Yip Seow Thung
Registration Number: R24121304
EA License No: 18C902

At Temasek Laboratories@NTU, our mission is to undertake cutting-edge research in defence science and technology, driving new solutions and advancements across various research areas, including Microsystems Technology, Hardware Assurance, Signal Processing, Advanced Materials, Advanced Laser Technology, and Emerging Technologies.

Microsystems Technology Development Centre (MTDC) at TL@NTU is having ISO certified III-V Wafer Fabrication Line up to 100-mm diameter wafers with strong industrial/academic experienced Technical Specialists/ Engineers/ Scientists. We are a fast-paced research facility that designs, develops, and manufactures integrated chips, i.e. heterogeneous system in package modules, for defence and commercial applications.

We are looking for a hands-on Thin Film engineer who demonstrates a positive attitude, collaborates well in a team, and possesses strong technical abilities along with sound problem-solving skills.

Key Responsibilities:

• Work with the module leader and execute the design of experiment (DOE) using advanced techniques such as sputtering, evaporation, and chemical vapor deposition (e.g. SiO2, SiON, TaN, Au, Ti, Al, Ni, Pt and etc.).
• Develop and optimize deposition parameters to achieve precise film thickness, uniformity, and quality.
• Help to identify and troubleshoot process issues, working towards yield enhancement and performance improvement.
• Utilize a range of characterization techniques, including optical microscopes, surface profiler, SEM, Ellipsometer to analyze thin film properties.
• Maintain detailed documentation of processes such as standard operating procedure (SOP), experimental setups, and results for future reference and knowledge transfer and including training.
• Oversee the operation of laboratory equipment and ensure proper functioning. Work with the equipment vendor to conduct routine maintenance, troubleshooting, and calibration of equipment to minimize downtime.
• Work with the University’s procurement team to source and acquire necessary equipment. Evaluate and select vendors, ensuring equipment aligns with research requirements and budget constraints.
• Adhere to laboratory safety protocols and ensure compliance with University and regulatory standards.
• Collaborate with different modules and team members.
• Communicate effectively with team members, providing updates on processes and status of equipment.

Job Requirements:

• Diploma in Engineering (e.g. Microelectronics, Electrical & Electronics Engineering, Material Engineering) with 3 years of relevant working experience or Bachelor’s degree in any Engineering (e.g. Microelectronics, Electrical & Electronics Engineering, Material Engineering).
• Hands-on working experience in semiconductor fab/cleanroom environment in Thin Film area preferred (e.g. SiN, SiO2, TaN, Al, Au, Ti, Ni, Pt and etc.).
• Ability to create and analyze DOE for Thin Film process.
• Experience in wet bench processes, especially the lift-off technique, is essential.
• Basic knowledge in semiconductor fabrication process and device physics.
• Strong understanding of thin film materials and their properties, with expertise in process optimization and troubleshooting.
• Excellent problem-solving skills and ability to work effectively in a collaborative team environment.
• Strong communication skills, with the ability to convey complex technical concepts clearly and concisely.
• Commitment to maintaining high standards of safety, quality, and professionalism in all aspects of work.

We regret to inform that only shortlisted candidates will be notified.

About our company

We are a leading engineering and construction company based in Singapore. With multifaceted project management capabilities and a strong diverse workforce, we provide a full range of services in engineering, procurement, construction and maintenance of power and industrial plants across the world.

Responsibilities

• Perform inspections and tests on electrical and instrumentation systems, including cables, panels, field instruments, and control systems.
• Ensure installations and testing comply with approved drawings, project specifications, and relevant standards
• Prepare and review Inspection and Test Plans (ITPs), Method Statements, and Quality Control procedures.
• Maintain quality records, such as test reports, calibration certificates, and inspection checklists.
• Liaise with construction team, subcontractors, and corporate QMS department to address quality-related issues
• Support commissioning activities by ensuring all quality requirements are met before system handover
• Ensure compliance with industry standards, local regulations, and safety requirements
• Any other duties to be assigned from time to time

Pre-requsities

• Degree/Diploma in Electrical Engineering or related field
• Minimum 5 years of experience in power or industrial plant construction projects
• In-depth knowledge of electrical systems for critical equipments in power plant construction
• Proficiency in inspection and testing of electrical and instrumentation systems
• Effective communication and interpersonal skills for collaboration with multidisciplinary teams
• Commitment to safety and compliance with regulatory requirements
• Project location: Jurong Island (Transport provided at designated pick-up points)

Responsibilities:

• Review specifications, clarifications, and drawings.
• Schedule works, requisition materials, control costs, and supervise projects.
• Coordinate with Structural, Architectural, and M&E teams to resolve issues.
• Ensure timely progress and compliance with safety and regulations.
• Conduct QA/QC and enforce safety on-site.
• Prepare progress and handover reports.
• Handle additional assigned tasks.

Requirements:

• Degree in Civil Engineering with PEB recognition.
• Working experience in A1/A2 building companies is preferred.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

• Coordinating with the client and attending client meeting whenever required
• Supervise and coordinate with team to produce deliverable per schedule and quality
• Administrative role of 3D modelling process with AVEVA software
• Review and comment on various engineering documents
• Design & incoporate structural components of project into AVEVA 3D model and produce 3D structural models
• Multi-discipline design coordination to avoid & correct interferences in AVEVA 3D model
• Prepare construction drawings (2D Structure drawings, bending template, profile nesting, plate nesting and material list) utilizing AVEVA Marine Drafting
• Modelling of Equipment and Outfitting in AVEVA
• Extraction of Outfitting General Arrangement from AVEVA
• Prepare a wide range of engineering related documents such as plot plans, Key plan
• Extraction of Piping layout and Piping General Arrangement from AVEVA
• Extraction of Isometric drawing with MTO and Line list
• Data consistency and Clash checking in AVEVA
• Prepare support drawings
• Checking the piping and other discipline documents as per shipyard payment
• Perform 3D Modelling of Electrical equipment and cable tray/ladder, supports and instruments in AVEVA
• Preparation of 2D deliverables (lighting layout, wiring diagram, equipment layout, interconnection diagram, cable tray/ladder layout, cable tray/ladder fill report and MCT layout)

Automation SIS (Safety Instrumented Systems) Engineer

12 month contract

About the Company:

Our client is a US healthcare and a leading global biopharmaceutical company. They have a revenue of US $40.1 billion, with more than 69,000 employees across 140 countries with a heritage of more than 125 years. Our client is committed to provide patients and customers with a reliable supply of high-quality, safe, and effective medicines and vaccines. Their global supply strategy relies on manufacturing capabilities and expertise to achieve this mission

Critical Responsibilities but not limited to:

• Participate in Safety Instrumented Systems (SIS) Capital Projects as automation representation for installation and expansion of new SIS Systems. Ensuring compliance to industry standards like IEC61511 and IEC61508
• Perform automation change controls with guidance from Automation Lead to ensure that changes are raised and closed on time following the required quality standards. Manages Project Schedule to ensure that manufacturing is not impacted.
• Maximizes production capacity through timely completion of planned maintenance activities and effectively resolving unplanned downtime and events
• Participates in HAZOP / LOPA reviews as SME and completes action items as required
• Develops Automation SOPs, Job Aids and procedures.
• Leads and applies effective root cause analysis and troubleshooting techniques to support resolution of incidents, events, deviations, atypical investigations and fault reports related to Automation and ensures all the resolution are effectively implemented within the agreed time frame to prevent recurrence.
• Supports a continuous improvement framework within Automation and the IPT and works with Leads to identify and implement improvements.
• Support Automation Projects
• Any other activities required by managers

Requirements:

• Bachelor’s degree in electrical, Electronics, Chemical, Science or Computer Engineering
• Minimum 5 years of technical experience in automation engineering within manufacturing or oil & gas industry
• Minimum 5 years hands-on experience in Yokogawa ProSafe and DCS
• Minimum 5 years’ experience working on Safety Instrumented Systems capital projects.
• TUV Functional Safety Engineer Certification

Reg No: R22104540

EA License no: 94C3609