Seeking Site Engineer with prior knowledge and experience tomaintenance and troubleshooting and repair equipments such asTLD ACU, GPU, Tow Tractor, ASU, boom lift and scissors lift, hydrauliccylinder and general electrical troubleshooting. Will be deploy atvarious site in singapore for general repair, servicing andmaintenance of basic ground support equipment.

Job Description:
We are seeking an experienced AI Chip DFT (Design for Test) Engineer to join our team. This role involves the design and implementation of test architectures for AI chip designs, ensuring efficient and reliable testing processes. The ideal candidate will be responsible for integrating DFT circuits, performing simulations, developing test vectors, and supporting yield improvement and fault analysis.

Key Responsibilities:

• DFT Architecture Design: Lead the design of DFT architecture at the chip level, implementing testing circuits such as Scan, Mbit, Memory repair, and Bscan.
• DFT Circuit Design and Insertion: Implement DFT circuits and integrate them into the chip, ensuring proper timing constraints for DFT mode convergence.
• Functional Verification: Perform functional verification, pre-simulation, post-simulation, and power simulation of DFT circuits. Troubleshoot and resolve any issues encountered during testing.
• Test Vector Development: Develop high-coverage, low-cost test vectors and validate them through simulation and timing analysis.
• Yield Improvement and Fault Analysis: Contribute to yield improvement efforts and fault analysis. Assist with testing SDC (Synopsys Design Constraints) constraint files in testing modes and help with timing and power convergence in the backend.

Qualifications:

• Educational Background: Bachelor’s degree in Electronics Engineering, Computer Science, or a related field. Advanced degrees (Master’s or Ph.D.) are a plus.
• Professional Experience: Minimum of 4-5 years of experience in DFT, with expertise in chip-level DFT architecture design, circuit insertion, and testing.
• Technical Skills:
  • Proficiency in DFT methodologies, including Scan, Mbit, Memory repair, and Bscan.
  • Strong experience with functional verification and simulations (pre/post, power simulation).
  • Ability to develop efficient test vectors and perform timing and simulation analysis.
  • Familiarity with yield improvement and fault analysis processes.
• Tools & Scripting: Experience with DFT tools and scripting languages (e.g., TCL, Perl, Python).

Soft Skills: Strong problem-solving skills, attention to detail, and the ability to collaborate effectively with cross-functional teams.

Job Scope & Responsibilities:

• Responsible to lead, coordinate, and deliver each development or improvement project within set budget, timeline, and quality.
• Identify, verify, agree to, and communicate project goal, requirements and desired outcome with key details when attending to customers’ needs; working closely with the Chief Product Officer; and leading the Tech and Ops teams.
• Develop clear understanding of the tech stack & capabilities and the business operations and logics as you prepare and structure the project plan which includes product & workflow breakdown and Gantt chart showing the levels of specific tasks and activities.
• Responsible for communicating effectively among the internal and external stakeholders, with an astute judgement in managing, monitoring, and delivering the agreed scope, budget, timelines, and quality to meet customers satisfaction.
• Lead, Manage, and hold the Tech and Ops teams Accountable (LMA) to ensure effective collaboration within the teams to deliver better product quality, continuous improvement, and Quality Assurance.
• Instil a vibrant corporate culture with our core values.

Job & Skill Requirements:

• Detail oriented, meticulous in monitoring & organizing time and resources.
• Good negotiation skills to set each project timeline, quality and required resource; resolve conflicts and maintain harmony.
• Good negotiation skills to set each project timeline, quality and required resource; resolve conflicts and maintain harmony
• Ability to keep calm and grounded within the team, manage ambiguous situations and deliver project on target.
• A good Degree with 2-5 years’ work experience in tech project management, preferably in startup technological and software development projects.
• Familiarity with agile development and PM tools like Trello is very helpful.

We are a design and build contractor in the construction industry

We also provide project management services in the construction industry.

Roles and Responsibility:

1. To assist project manager in managing construction projects in industrial /residential sectors

2. To assist project manager in managing client ,consultants , subcontractors and peers in project delivery context

3. To be responsible for progress reporting

Skill & Certification

5. Attained Degree or diploma is construction disciplines

6. Attained Safety Course for project manager certificate

7. Proficient in project Microsoft project

8. Proficient in autocad software

9. Min 1 to 3 years experience in construction industry.

Responsibilities:

IT Infrastructure Support:

• Provide Level 1 technical support to end user, including software & network problem
• Deployment of new computer, including installation of software to end user
• Create & maintain end user account (AD & Email)
• Co-ordinate with external vendor for support
• Involve with infrastructure project & setting up new site office
• Responsible for new staff orientation briefing
• Provide onsite support to end user.
• Ad-Hoc duties/task as per assigned

General:

• Create and maintain documentation on technical problem.
• Procurement of IT hardware and software
• Update & maintain IT inventory
• Disposal of IT hardware

Requirements:

• Nitec / Higher Nitec / Diploma / Advanced Diploma in IT
• Min. 2 years of experience or relevant working experience. Preferable with desktop support experience
• Basic Active Directory, Networking & MS365 skill. Candidate with Server, Hyper-V & Firewall knowledge is a plus point
• Good Knowledge on Microsoft Product
• Travel to various location around Singapore
• Able to work independent & multitask

Skillsets (Must have)

• Experience as a software engineer, with a minimum of 2+ years of proven DevOps and ideally DevSecOps experience.
• Strong knowledge and experience of programming languages such as Java, Python, C# or Javascript/Typescript.
• Good experience in developing software, writing unit/integration test cases and test driven development (TDD).
• Strong knowledge in Linux operating systems and commands.
• Strong knowledge and experience with Git.
• Strong understanding of Docker, Kubernetes (preferably Openshift 4).
• Good communication and written skills.

Skillsets (Good to have)

• Strong understanding of software development best practices including SDLC, Software Configuration and Change Management, Agile, Scrum, Kanban.
• Knowledge and experience with Jenkins, Gitlab, SonarQube, JFrog Artifactory, Cloudbees CD/RO (or equivalent CD tool), and JIRA.
• Knowledge and experience with Helm 3, Terraform and commonly used AWS services as well as AWS automation/IaC stack (e.g. AWS CLI, CloudFormation, Boto3, CDK).

JOB SCOPE & JOB RESPONSIBILITIES

• Experience in an engineering, procurement and operations.
• Ability to analyze bills of material and drawings to understand key requirements.
• Knowledge and direct experience in negotiating contracts and quotations with Contract Manufacturers and Suppliers.
• Ability to identify cost reduction opportunities.
• Responsible for procurement, sourcing and negotiation.

JOB REQUIREMENT

• Diploma or Bachelor degree in engineering.
• At least 3 years experience in procurement engineering.
• Good procurement knowledge is a must.
• Possess good analytical skills, resourceful and independent.
• Team player
• Effective verbal & written communication skills.

Job Scope:

• Responsible for co-ordination of all technical activities on assigned project and assist in ensuring successful completion and execution of the assigned projects.

• Set up network equipment/system for site deployment.

• Participate in Site Test with Customers.

• Ensure effective communication and coordination between all disciplines and project participants in the projects, to resolve all site issue hindering the work progress.

• Assist in planning, scheduling and coordination of works and ensure proper deliverables and full compliance to the approved standards.

• Report to the Project Manager on any site issues hindering the work progress. Highlight those changes that might result in omission or variation cost.

• Report to the Project Manager/Site Manager on work progress carried out on site.

Requirements

• Nitec in Electrical and Electronic Engineering.

• Strong communication and coordination skills.

• Basic Network knowledge is required.

• Experience in Wifi, CCTV and Network is preferred.

• Good planning and project management skills.

• Resilience and ability to work under high pressure.

• Good interpersonal skills and ability to manage difficult situations and client relations effectively.

• Experience with M&E Site Coordination will be an advantage.

• Able occasionally at night to work at work for maintenance support.

This is for the Automation Team under the Systems Technologies which focuses on DevOps and automation for internal IT that includes a lot of automation work around IaC.

• Design, develop and implement various infrastructure automation and robotic process automation to transform current operation processes.
• Present ideas for process/system transformation
• Work with various process owners and teams to develop and implement proposed ideas and automate repeatable tasks
• Ensure smooth transition of processes

Candidate must possess at least a Diploma in Computer Science / Information Technology or equivalent.

Proficient in automation technologies such as Ansible, Chef, CI/CD, Jenkins, Terraform etc.

Minimum 4 years and above of relevant hands-on experience in system operation support and project management.

Proven ability to work creatively and analytically in a problem-solving environment demonstrating teamwork, innovation and excellence.

Experience in troubleshooting, resolving, and communicating incidents and underlying issues to identify root cause.

Possesses strong analytical skills to diagnose and address application problems.

Result and customer oriented with multi-tasking capabilities

We are seeking a talented Frontend Software Engineer to develop and roll out the next generation of our advanced tools to support autonomous driving. As part of the Map Creator team, you will play a critical role in building a sophisticated web-based application that produces semantic map annotations for our AVs. We focus on streamlining end-user workflows, creating performant visualization and editing of huge scale map data, and automating map production. We support the evolving map data needs of our researchers and engineers.

This is a hybrid position in our Singapore office.

What you'll be doing:

• Design, develop, and deploy scalable frontend solutions for our web-based map visualizations and editors.
• Write clean, idiomatic, and maintainable code that adheres to best practices.
• Optimize applications for peak performance and scalability to handle huge scale data.
• Collaborate with machine learning teams to integrate automation into the annotation process, for maximum efficiency.

What we’re looking for:

• BS or MS in Computer Science or related field
• 2+ years professional experience as front end software engineer
• Good understanding of modern JavaScript code and React framework
• Experience in profiling and optimizing web performance.
• Strong problem-solving skills and a keen aptitude for learning new technologies and methodologies.
• Excellent communication and collaboration skills, with the ability to engage effectively with both technical teams and non-technical stakeholders.

What you will do

• Customer support responsibilities, ensuring timely and effective resolution of customer inquiries and issues
• Project management involvement, including planning, execution, and delivery
• Support marketing promotion activities to enhance product visibility and market presence
• Engage in clear and effective communication with customers to address their needs and concerns
• Aid in debugging and testing to ensure product quality and reliability

Required Skills

• Excellent proficiency in English and Mandarin, both written and verbal, to liaise with our affiliates from different regions.
• Preferred experience in display or scalar-related technologies
• Strong communication skills, with the ability to effectively convey technical concepts
• Desirable capability in system integration to facilitate seamless collaboration across different components and subsystems

Location: One North, Singapore

You will be a key member of the R&D Digital Translation team established under the Singapore Maritime Institute. The R&D Digital Translation team develops and operates digital and cyber products and translates R&D projects to real world implementations for the maritime industry.

You will collaborate with various project managers, solutions architect and infra engineers to deliver leading-edge digital solutions and services to meet the business requirements of the maritime community. You are pro-active, self-motivated and resourceful team member with good technical or digital knowledge and possess strong influencing and people handling skills. You are constantly looking at new ways to apply digital technologies to meet business needs and can handle multiple projects concurrently.

Key Responsibilities

1. Design, build and maintain the software development pipeline automation with related toolsets to enable CI/CD

2. Design and implement the infrastructure and operating environment for container-based microservices that will meet the agreed high availability, performance and security requirements

3. Utilise native cloud tools to monitor the health and performance of the production and UAT environments, and automate the alerts as part of the incident reporting framework

4. Work closely with development teams and other internal teams to ensure that solutions are designed in accordance to requirements to facilitate scale/performance, security and operability

5. Work closely with on-site Tenant Facility Management (TFM) team to supervise day-to-day cloud operations which include activities such as regular patching and system configuration

6. Support and ensure that the software releases are aligned with MPA's internal software release and deployment process

7. Facilitate and support troubleshooting or root cause analysis of platform issues or incidents

8. Proactively monitor and identify opportunities for automation, process improvement and architecture simplification

9. Participate in project planning and management activities

10. Research and develop prototype using relevant technologies and trends for continuous improvement of the platform

Requirements

1. Background in IT/Computer Science/Computer Engineering or relevant discipline

2. At least 2 to 3 years of working experience in DevOps automation, containerisation and orchestration

3. Strong knowledge and experience in Microsoft Azure and/or Amazon Web Services and related cloud services (e.g. Azure DevOps, hands-on experience using Azure Administrative portal). Certification(s) in Microsoft Azure (e.g. MCSE: Cloud Platform and Infrastructure or equivalent) and Amazon Web Services will be an advantage.

4. Strong knowledge and experience in software development automation tools

5. Strong scripting skills (e.g. powershell, cli, python)

6. Strong understanding and experience in virtualisation and networking in a container environment such as Kubernetes, Docker

7. Strong understanding of cloud computing/container deployment and management

8. Strong understanding and practice of Agile projects (e.g. SCRUM)

9. Experience in working with Government Commercial Cloud is preferred.

The Site Engineer (Building) is responsible for assisting on the progress of site works and manpower related aspects of the project.

The responsibilities of this position are, and not limited to, as follows:

• Monitor and supervise Engineers / foremen, ensure compliance to the quality procedures & standard of workmanship. Checking on quality and quantity of work by subcontractors.
• Preparation of detailed program for the site team to follow accordingly & completed in time.
• Resolve drawing discrepancies & technical difficulties with Technical team.
• Coordinates between sub-contractors/vendors/internal departments and monitor site manpower / material / equipment demands to meet schedules.
• Liaise with the Consultants on the submission related to structural works and Technical Department.
• Plan all works on site, including program schedules and construction methods, forecast equipment, material and manpower requirement, and control usage and wastages of all.
• Adherence to safety practices in the work place.
• Any other duties that may be assigned to you from time to time as your superior / management deem fit.

Qualifications and Education Requirements

• Education: Degree in Civil Engineering
• Experience: Prior 3 years experience in building projects

Logicalis is an international multi-skilled solution provider providing digital enablement services to help customers harness digital technology and innovative services to deliver powerful business outcomes. Our customers span across industries such as financial services, TMT (Telecommunications, Media and Technology), Education, Healthcare, Retail, Government, Manufacturing and Professional services. Our focus is to engage in the dynamics of our customers’ vertical markets and apply the skills of our employees in modernising key digital pillars, Data centres and Cloud services, Security and Network Infrastructure, Workspace communications and collaboration, Data and information strategies, and IT operations modernisation.

Logicalis Group has an annualised revenue of over $1.7 billion, from operations in Europe, North America, Latin America, Asia Pacific and Africa. It is a division of Datatec Limited, listed on the Johannesburg Stock Exchange, with revenues of over $4 billion.

As we continue to grow as a business, our people are our key differentiator with our competitors, and developing and retaining our talent is a key priority for all of our businesses.

Accountabilities:

• Understand the customer’s network structure and become familiar with the Customer’s network implementation and support processes and procedures to ensure supporting a network with proper SLAs.
• Carry out migrations of existing setup, features, and configuration as required by the customer in a production/testing environment and help improve plans to implement new features to increase the network stability or user requirements.
• Perform IOS upgrades and patches to fix software and ensure that the environment is bug/vulnerable free by keeping system with up to date software.
• Troubleshoot production issues and network problems to fix any user related issues and work with principal vendors and customer to provide the resolution with in the proposed timelines.
• Raise equipment Return Material Authorizations (RMA’s) and to track till problem resolution and produce incident report for any severity issues that was reported by customers or end users.
• Be available for customers’ questions in assisting their needs to support network related issues and monitor customer network leveraging appropriate monitoring tools as well for special scheduled activities performed during non-business hours or public holidays due to system upgrades.
• Perform the wireless testing across customer’s different locations and identifying or fixing if there are any performance issues or slowness in network for wireless users.
• Identify the principal vendor best practices and only perform changes with customer approval to improve the security levels.
• Co-ordinate between his/her own Global Network Centre for any escalations or major issues and bridge between customer / senior resources / vendor / etc

The Individual and their Experience:

• Minimum 2-3 years of relevant experiences in network operations including wireless technologies.
• Hands on experience in fixing user issues in production environment is essential
• CCNA certified plus any other networking certifications preferred
• Basic understanding about Routing / switching protocols.
• In-depth knowledge on Stacking / L2 technologies / STP / IP Addressing.
• Proficient at performing local / remote IOS upgrades on different products and RMAs for faulty devices in production
• Good understanding about different monitoring tools like Cisco PI / PRTG / Spectrum / Syslog / etc and TCP/IP structure and IP scheme
• Strong knowledge on Wireless / ARP / MAC / L2 loops / Switching.
• Understand DNS / DHCP / Security knowledge is an added advantage.
• Eagerness and willingness to pick up & adapt new technologies and automation.

By submitting your application, you would have deemed to have given consent and have read through the DP notice for Job Applicants here: https://ap.logicalis.com/sites/default/files/2022-10/PIMS-A7.3-01%20Attachment%20I%20DP%20Notice%20for%20Job%20Applicants_updated9sept22.pdf

(l) Job Description

• Conduct site Audit on the sub-contractor/vendor.
• Ensure that adequate equipment and facilities are provided for verification of product quality.
• Ensure that all controlled documents are administered effectively.
• Quality control of sub-contractors.
• Daily coordination of all site work activities.
• Liaising with Client inspector/Authorized inspector to ensure project requirement is fully achieved through out the project.
• Coordinate with sub-contractor/vendor to resolve quality issues and follow up for corrective actions.
• Carry out verification of purchased products in vendor's premises as specified in contracts.
• Monitor and control quality of purchased products.
• Monitor and control quality of special process performed.
• Ensure that all inspection, test and identifications are carried out according to quality plan or documented procedures.
• Ensure that all inspection and test equipment are properly calibrated and controlled.
• Ensure that all nonconforming materials and products are adequately controlled.
• Investigate the cause of the nonconforming products and the corrective action needed to prevent recurrence.
• Ensure that all quality reports and customers' complaints are analyzed with adequate corrective actions taken.
• Ensure that quality records are properly stored and maintained.
• Define quality requirement for service and installation of products.
• Maintain adequate statistical techniques to control product and process quality.
• Any other duties that may be assigned to you from time to time as your superior / management deem fit.

Requirements

• Bachelor's degree in Mechanical, Electrical, or a related field.
• MIn 3 years QAQC experiences in building projects.
• Detail-oriented and have strong communication skills and able to work with people from all levels.

• 
  
• To be involved in the planning and designing of civil and structural engineering works
• To prepare the design and technical specifications for tenders; as well as tender documents for the bidding of civil and structural engineering projects
• To supervise in the civil and structural works
• To collaborate with peers in other disciplines in feasibility study and design, and ensure delivery of quality service for clients
• Any ad-hoc duties as per assigned

1) At least two years working experience

2) Able to use engineering software Staad pro, SAFE, Plaxis

3) Able to work independently under the guidance of senior / principle engineer

Job Description:

• Prepare project proposals & review, and seeking for approvals. Management team and Team Leaders will provide guidance. project team, management and customers.
• Work closely with business team to handle customers. Support business team for any escalations from customers.
• Organize and ensure key project milestones are achieved, eg Design Review, Factory Acceptance Test, Site Acceptance Test, etc…
• Closely monitor progress with project Gantt chart, budget and scope of work. Resolve conflicts, remove impediments, and foster positive work environment for project team.
• Manage and maintain project documents and artefacts.
• Manage and facilitate productization of projects with manufacturing and aftersales team.

Requirements:

• Min Bachelor’s Degree, preferably in an engineering field
• Knowledge in financial accounting, systems engineering, alternative and/or clean energy is advantageous
• Proficient with MS Project or similar, MS Office Suite of tools
• Fluent in English and writing skill of clear and concise reports
• Excellent communication skill, patient and precise
• Proactive team player, also able to work independently
• Motivate others and yourself

Job Description

a) To report to the Manager or team leader as shown in the organization chart. He/she is responsible for the assigned or related project tasks and responsibilities.

b) The detailed duties and responsibilities include but not limited to the following:

• Study and fully understand the ISO requirements, technical drawings, scope, contractual requirements and sub-contract agreements. Work with the consultants to resolve technical issues prior to construction.
• Submit to superior for feedback and concurrence on short or medium-term programmes and execute the works according to the detailed programme.
• Ensure that the works are carried out according to the approved drawings, quality procedures and EHS requirements. Managing the works with excellent housekeeping is a key focus.
• For quality management, the engineer is responsible to fully implement with the quality recordings, carry out result analysis and formulate action plans for continuous improvement.
• Implement and maintain proper recordings to comply with EHS, quality, client and authorities’ requirements.
• Responsible for cost management so that the materials used for both temporary works and permanent works are not damaged or control the wastage within specified tolerance. Rework or abortive work which has serious time and cost impacts shall be avoided.
• Ad-hoc matters as assigned by the PM which is necessary for the execution of the project.

Job Requirements

• Diploma/Bachelor's degree in Civil & Structural Engineering
• Mininum 2 - 5 years' experience working in construction industry
• Preferably with HDB experience

Job Position:- Resident Engineer (M&E)

Working hours

Mon - Fri (08.00 am to 5.00 pm)

Sat - (08.00 am - 12.00 pm)

Education & Qualification

• Degree in Mechanical or Electrical Engineering or equivalent.
• Possess at least 8 years of relevant and practical experience on site;

Skills And Knowledge

• Strong technical knowledge to review design details and method statements.
• Ability to resolve site issues during construction.
• Familiarity with local mechanical & electrical codes, regulations, and authority requirements.
• Completion of at least one safety course and ability to identify potential safety infringements.
• Ability to manage a team of Site Supervisors (for Senior Resident Engineer, Resident Engineer, and Resident Architect roles).
• Administrative skills to maintain discipline and manage personnel records.
• Good communication and interpersonal skills to work effectively as a team player.
• Diligent, methodical, and meticulous.
• Willingness to work overtime and adapt to digitalization efforts in projects.
• Keen learner and supportive of new technologies in the built environment.

Job Description:

• Architect and lead the development of high-performance, user-centric iOS applications.
• Serve as a technical authority, providing guidance and expertise across projects.
• Collaborate with stakeholders to define technical roadmaps and strategies.
• Ensure application reliability, scalability, and maintainability.
• Conduct deep code reviews and maintain high-quality standards.
• Stay updated with emerging technologies and drive their adoption.

Requirements:

• Bachelor’s or Master’s degree in Computer Science, Engineering, or a related field.
• 7+ years of experience in iOS development, with experience in leading large-scale projects.
• Mastery of Swift, Objective-C, and iOS development frameworks.
• Extensive experience with performance optimization and profiling tools.
• Advanced knowledge of mobile security standards and practices.
• Proven experience in mentoring senior engineers and influencing technical direction.
• Strong strategic thinking and problem-solving skills.

Job title: IT Engineer

Work Location: Singapore, On-Site

Position Overview:

The IT Engineer is responsible for the IT Operations and Maintenance of the company. You will work closely with our Global IT Department to ensure the optimal performance, security, and reliability of our IT infrastructure.

Responsibilities:

IT Environment and Policy:

• Ensure a seamless IT working environment by implementing and enforcing IT policies and procedures according to our company guidelines.
• Provide responsive IT Helpdesk services and conduct necessary training sessions internally to enhance team proficiency.

IT Procurement Management:

• Oversee IT procurement activities, including but not limited to laptops, desktops, monitors, accessories, network devices, and software.
• Collaborate with vendors to ensure cost-effective and timely acquisition of IT equipment and services.

Server Management:

• Install and provide support for server hardware and operating systems.
• Manage Microsoft Active Directory, ensuring user accounts, permissions, and security policies are properly configured.
• Configure and maintain essential server components such as Antivirus servers, File and Print infrastructure, and other critical services.

Networking:

• Monitor, manage and enhance WAN/LAN accessibility and security.
• Collaborate with the network team to optimize network performance and address issues promptly.
• Implement improvements to ensure the reliability and efficiency of the network infrastructure.

Security Services:

• Implement and enforce IT security policies to safeguard organizational assets.
• Conduct vulnerability management to identify and address potential security risks.

Qualification/ Requirements:

• Bachelor’s degree or higher in Computer Science or related technical field.
• Minimum of 3 years of practical experience in IT.
• Hands-on experience in networking configuration, IT device maintenance, troubleshooting, and security reinforcement.
• Familiarity with Linux operating systems and system optimization is a strong plus.
• Proactive approach to handling responsibilities with a strong sense of duty.
• Excellent communication skills to effectively interact with team members and end-users.

System Integration Engineer Job Scope
For users with testing requirements such as SMPS, SERVER POWER, EVSE, PV, BATTERY, BOBC, Passive Components, and Safety Regulations, the Quantel System Integration Engineer is responsible for the design and implementation of Automated Test Systems (ATS), handling both hardware and software tasks throughout the project lifecycle.

Pre-Project Responsibilities

1. Participate in the pre-sales process for Automated Test Systems (ATS).

2. Evaluate the cost Bill of Materials (BOM) and project schedule for system integration.

3. Discuss and define test purposes, requirements, and acceptance conditions with clients.

In-Project Responsibilities

1. Hardware

a. Procurement of system cabinets and customized mechanical parts

b. Procurement and installation of electrical components.

c. Creation of electrical schematics.

d. Installation and wiring of Chroma or third-party instruments.

e. Conduct Factory Acceptance Testing (FAT).

2. Software

a. Program on Chroma’s exclusive testing platforms (SMPS ATS8000 / BatteryPro).

b. Develop programs based on user test requirements, regulations, and instrument configurations.

c. Conduct regulation studies to ensure compliance.

Post-Shipment Responsibilities

1. Provide online remote support and onsite technical assistance, including system installation, site acceptance testing, and training.

2. Follow up on technical issues, providing professional advice or troubleshooting support.

Requirements:

1. Strong foundational knowledge of electronic circuit principles.

2. Excellent time management skills to handle multiple projects effectively.

3. Proactive, self-motivated, and dynamic.

4. Willingness to travel internationally for technical support.

5. Ability to communication with the Taiwan headquarters.

We offer comprehensive professional technical training, including instrument application, software programming and operation, as well as overseas on-site training at client sites or the Chroma Taiwan headquarter.

6. Diploma in Electronics Electrical Engineering.

7. Fresh graduate or 1 years or more working experience

8. Preferable experience in Electronics Test and Measurement Instrument.

9. Class 2/3 driver licence.

10. Good work ethics and must be willing to learn and follow instructions

Applicants who possess relevant experience and willing to take the challenge are most welcome to apply. Salary will commensurate with years of working experience.

Please submit your updated resume with recent photo in MS Word or PDF format and indicate current and expected salary. Only shortlisted candidates will be notified.

Pre-Sales Solution Engineer

Our Sales team is the driving force behind our company's growth, handling the entire sales cycle from prospecting and business development to expanding our services with existing clients through effective account management. We pride ourselves on our dynamic, fast-paced, and multicultural environment, where ambition and innovation thrive.

What is the role about?

We are now searching for an experienced Pre-Sales Solution Engineer to provide technical knowledge, advice, and support to sales representatives and customers during the sales process to resolve requests regarding products and technical issues and to maximize the benefits derived from the organizations’ products and or services.

Key responsibilities:

• Provides presales technical expertise to the Product teams and customers.
• Provides technical input into projects and technical documents and identifies additional sales opportunities with existing customers.
• Installs and demonstrates the products at customer sites.
• Collaborates with product teams to develop and recommend products and services to meet customer’s requirements.
• Assist customers to identify their technical specifications and determine what documentation is required to incorporate the organization’s products into customer applications.
• Maintains up-to-date and comprehensive knowledge of the organizations and competitor’s products and/or services.
• Writes blogs, white papers, and other technical material to promote the products and technical capability of the company.
• Helps the customer, if needed, in the implementation of the new products and makes sure the defined specifications are in place and helps implementing them.

Who are you?

• 7 - 10 years of Technical Solution experience within IT (mainly Cloud)
• BA/BS degree in Business Administration, Sales, or a relevant field
• Experience in the IT Industry (IaaS)
• Experience in writing blogs, attending events, and making presentations.
• Experience working cross-functionally with internal and external stakeholders.
• Fluency in English and one Asian language (both, verbally and in writing) to liase with stakeholders in the region.
• SAP experience is a plus.

Benefits:

• Competitive salary + AWS + annual bonus scheme
• The possibility to develop yourself and build your career
• Comprehensive Health Insurance
• 18 days paid time off
• Multi-cultural work environment (our colleagues are from over 60 countries!) in a company where you can truly make a difference

Ready for the next step?

If you’d like to apply, please do so online. To learn more about us, follow us on LinkedIn or Instagram to get an inside look at life at Leaseweb. For questions, please reach out to Danisha Ardilla, Talent Acquisition Specialist, at: [email protected]

ROLE DESCRIPTION SUMMARY

Thales is seeking suitable candidate for the position of Engineer (System Security).

You will be looking after the governance of the infrastructure and systems for mission-critical Command and Control (C2) system that Thales Solutions Asia (TSA) have developed for government agency. You will be part of a team to manage the security of system, to ensure the system adhere to the security policies, and is well protected from any threats, risks or exploits.

KEY ACTIVITIES AND RESPONSIBILITIES

As aSystem Security Engineer, you are accountable for:

Provide security expertise and management services to support Authority in activities such as:

· Internal / external audits (IM8, Cybersecurity, etc)

· Policies compliance (IM8, Cybersecurity, etc), work with vendor on:

- Vulnerability management compliance reports and patch reports

- Filing of documents and Security Scorecard for audit purpose, to produce it as required

- Monthly logs review. E.g., privilege user activities

- Vulnerability/ Compliance Assessments

- Penetration Tests and Source Code Reviews

· Disaster Recovery (DR) and Business Continuity Planning (BCP):

- All relevant activities related to the DR and BCP planning

- Checks on system backup completion by vendor and datacentre

- Document update and implementations.

· ICT/Threat Risk Assessments (TRA)

· Monthly reviews of privileged accounts and non-privileged account, disable inactive accounts

· Seek security waivers (IM8, Cybersecurity Act, Circulars etc)

· Circulate security notifications/alerts to vendors and ensure status updates too all stakeholders including cybersecurity centre

· Security monitoring/tracking:

- Monitor alerts from SOC

- Update stakeholders regarding SOC alerts

- Review compliance reports with vendors to ensure that system is compliant

- Manage, track and update any security incidents/ issues to all stakeholders

- Review Incident Report (if any)

· Patching:

- Ensure patches are tested and verified before seeking approval for patching downtime

- Communicate system downtime to all stakeholders

- Ensure system availability after patching is completed

· Obsolescence management for software licenses, hardware, operating systems and certificates

· Security enhancement/ integration

· Support the submission of security clearance for related vendors

· Perform other related duties as assigned or requested

KEY KNOWLEDGE AND EXPERIENCE

To be successful in your role, you will have demonstrated and/or acquired the following knowledge and experience:

· Working hours will be 0830 hrs to 1800 hrs (for Monday to Thursday) and 0830 hrs to 1730hrs (for Friday), excluding weekends and Public Holidays

· Outside of working hours, to provide online support via emails and group chats when required based on the priority and severity of issues related to the system

· Able to cope in a highly pressured fast-paced environment

· Prior working experience in cyber security and vulnerability management is preferred

· Strong knowledge of security principles, best practices, and industry standards, such as NIST, ISO 27001, and CIS Critical Security Controls

· Able to understand security posture of systems

· Prior working experience in Project Management is a plus point

· Able to understand the system and software architecture, and user operations environment

· Willingness to pick up any new technologies

Education

Diploma or Bachelor’s Degree in Cybersecurity/ InfoSec/ Information Technology / Information Systems / Business IT or its equivalent

Relevant professional certifications, such as CISSP, CISM, CEH, or other security certifications

Experience

Minimally 1-2 years of experience in cybersecurity and supporting mission critical systems with very stringent SLA e.g. 99.9%

Well-versed in cybersecurity best practices and establishing of its policies

Well-versed in IT Service Management (ITSM) standards, processes, guidelines and best practices

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

The Electrical and Computer Engineering (ECE) Department at the National University of Singapore (NUS) is seeking qualified applicants for the position of Research Engineer to join our team and contribute to our ongoing research projects related to IC design.

Responsibilities:

• Explore heterogeneous systems with silicon chips being integrated on unconventional substrates such as flexible and stretchable, for ultra-low power always-on and intelligent silicon platforms.
• Work on innovative circuit techniques with very wide power-performance scaling to minimize the system energy while providing targeted levels of performance on demand. Such techniques will be investigated for digital sub-systems in advanced technologies.
• Be responsible to conduct research at the circuit level, defining and validating design options and defining new integrated circuit techniques.

We offer a competitive salary commensurate with qualifications and experience, along with a stimulating research environment and access to state-of-the-art facilities. This is a full-time position with an initial contract duration of 12 months, with potential for renewal based on performance and funding availability.

Qualifications

The candidate must possess:

• Possess a Bachelor/Master’s degree in either Electrical Engineering or strictly related (e.g., Computer, Communication, or Information Engineering).
• Activity performed in multiple research environments and industrial experience are highly valued.
• Expertise on the project scope, ultra-low power always-on and intelligent silicon platforms.
• Knowledge on circuit and system-level chip design is valued.
• Analytical and problem-solving skills.
• Open to fixed term contract.