Factory automation company looking for electrical engineer to design and program automated machinery. Job scope is design machine electrical circuit and programming of PLC. Do trouble shooting for PLC system. Experience in Mitsubishi, Keyence and Omron PLC. Knowlegde of PC programming will be good. Help to do some hands-on job.

Job Description:

• Ensure the quality of all construction work performed on site are in accordance with the company's QAQC requirement.
• Visit project sites, arrange and conduct QAQC inspections on mainly Structural Works and Architectural Works.
• Assist project teams on the preparation of project specific CONQUAS/Quality Management assessment by BCA with specific contract requirements.
• Ensure workmanship, procedures and method statements are in accordance to specified standards.
• Conduct regular inspections to ensure works are in compliance with method statements & proper sequence of work and in accordance to BCA’s good industry practises.
• Ensure that all project quality records and quality audit plans are maintained.
• Any other duties as assigned.

Job Requirement:

• Candidate must possess Bachelor Degree or Diploma in relevant discipline.
• Minimum 3 years of experience in construction/ civil engineering industry.
• Able to read and understand CAD, Revit/Navisworks software services in 3D model is essential.
• Have experiences in working in large scale projects.

ETH Zurich is one of the leading universities of the world with a strong focus on science and engineering. In 2010 it established the Singapore-ETH Centre (SEC) in collaboration with the National Research Foundation (NRF) to do interdisciplinary research on pressing problems.

The Singapore-ETH Centre is home to a community of doctoral, postdoctoral and professorial researchers working in three main programmes: Future Cities Laboratory, Future Resilient Systems, and Future Health Technologies. The centre provides a multicultural and interdisciplinary environment to researchers working on diverse themes, with the shared vision of translating research to practical solutions for more sustainable and liveable cities, resilient physical and social urban systems, and patient-centric healthcare systems.

Project Background

SEC is leading the interdisciplinary Cooling Singapore 2.0 project. The project is dedicated to reducing the urban heat island and improving the outdoor thermal comfort in Singapore. The project has develop a Digital Urban Climate Twin (DUCT) for Singapore. This includes development, deployment and operations of the necessary technical infrastructure and integration of a variety of computational models for anthropogenic heat emissions and urban climate simulations. The project is entering its final phase where is testing and transferring the DUCT to external stake holders.

Task/Job description

We are looking for a talented individual to join our interdisciplinary and international team based at the Singapore ETH-Centre.

Your key responsibilities are:

- Model and simulate the impact of district energy systems (with a special focus on cooling technologies) to urban warming in Singapore.

- Test the Energy system models to fine tune their performance in side the DUCT and de-bug when needed.

- Scenario testing. Carry a sensitivity analysis of the Energy model to understand its performance.

- Integrate these optimization algorithms into the Digital Urban Climate Twin platform.

Requirements

You should have:

- Master’s or PhD degree in Operations Research, Energy Systems, Process engineering, Civil engineering, Mechanical engineering or equivalent experience.

- A good command of scripting and data analysis languages (Python, Matlab, R) is preferred.

- Experience working with model-based energy and/or building systems design is a plus.

- Experience running and testing the energy model City Energy Analyst is a plus.

- Experience working in interdisciplinary teams.

- Excellent presentation and communication skills.

- Competency to execute excellent independent work and engage with external stakeholders.

Information about the application process and contact for applicants

Do not hesitate to contact us if you have any questions at [email protected]

We look forward to receiving your online application with the following documents:

• Curriculum vitae,
• A copy or reference to three of your top publications (if any), and
• Names of two references.

Please note that we exclusively accept applications submitted through our online application portal. Applications via email or postal services will not be considered.

Further information can be found on our website: https://sec.ethz.ch/research/cs.html

The Singapore-ETH Centre is an equal opportunity and family-friendly employer. All candidates will be evaluated on their merits and qualifications, without regards to gender, race, age or religion.

Assist with infrastructure planning and design

• Assist with the planning and design of infrastructure systems
• Assist with the documentation of infrastructure design and planning activities and decisions

Support infrastructure operations

• Perform infrastructure operations activities such as installations of infrastructure systems according to design specifications
• Align infrastructure operations with agreed service agreement standards

Maintain infrastructure

• Perform activities related to ongoing maintenance of infrastructure
• Assist with the implementation of agreed infrastructure changes and maintenance routines

Optimise infrastructure performance

• Perform ongoing tuning and optimisation of infrastructure hardware and software components such as updates and upgrades
• Participate in infrastructure development activities
• Assist with infrastructure testing and implementation
• Gather performance and data usage statistics for capacity planning and reporting
• Assist with piloting of new tools, technologies, and/or processes

Resolve incidents

• Perform problem/issue identification and resolution
• Assist with simulation of user problems to resolve operating difficulties
• Follow up with users to ensure problem has been resolved
• Recommend system modifications to reduce user problems

Requirements

• At least 6-8 years' of experience in the Network Management and Support Services, Unified Communication, Wirecenter maintenance
• Strong knowledge and experience in supporting Cisco Switch, Cisco Router, Fortigate Firewall, Palo Alto Firewall, ClearPass NAC, F5 VPN, IPS, WLC, Access Point and VSS/VLAN Architectures.
• Network Support in the areas of wireless, wired, VPN
• Network certifications eg CCNE, CCNA

• To carry out electrcial/instrumentation related detailed design and preparation of drawing.
• To interpret and develop P&ID, technical data sheet preparation and I/O wiring diagram.
• To carry out electrical/instrumentation calculation for the design.
• Responsible for reviewing of electrical/instrumentation documents and specification from clients and consultants.
• To check and review all electrical/instrumentation related drawings and documents from suppliers and vendors.
• To liaise with clients, consultants, sub-contractors to resolve technical issue at site and in office.
• To co-ordinate with engineers of other disciplines within the department.
• To prepare Pre-procurement including evaluation of technical and commercial bid from vendor and supplier.
• To provide engineering support in tendering of new projects such as preliminary design, material and cost esimates etc….
• To provide technical support to project team for on-going projects and resolve any technical issue on site.
• To assist in preparation of project schedule, related work procedure/method of statement and monthly progress claim.

For interested applicants, do apply directly on this link - https://beex.breezy.hr/p/ce28deac9ab7-manufacturing-engineer

Your Role

As the Manufacturing Engineer, you will report directly to the Chief Technology Officer (CTO). Your daily schedule will include frequent interactions with a multi-disciplinary team, across teams from design to manufacturing to operations. You will need to work in Singapore. Remote work is not an option.

Your Job Scope

• Manufacturing Plan: Coordinate with engineering and production departments to develop and implement Manufacturing Plan for products, by drafting work instructions & test plans, preparing BOMs, communicating to suppliers and training manufacturing personnel.
• Technical Support and Diagnosis: Technical support and troubleshooting of production issues related to equipment, processes, quality, controls, and systems. Identify defects or deviations from quality standards and perform root cause analysis to determine the underlying reasons for these issues
• Quality: Upkeep work quality on the manufacturing floor, by implementing quality control procedures such as: comprehensive incoming and outgoing quality inspections, compliance to work instructions, and implementing corrective actions on any lapses
• Record-keeping: Maintain detailed records of quality tests, inspections, and audits. Generating reports on quality performance and communicating quality issues to relevant stakeholders.
• Continuous Improvement: Identify areas of improvement from assembly procedures to tooling, to enhance product quality, manufacturing efficiency, and reduce defects
• Training: Provide training to staff on quality standards, procedures, and best practices to ensure that quality requirements are consistently met
• Supplier Quality Management: Collaborating with suppliers to ensure that raw materials and components meet quality specifications and standards.
• Compliance with Regulations: Ensuring that manufacturing processes comply with industry regulations, standards, and best practices to meet legal requirements and customer expectations.
• Provide day-to-day technical and engineering support to the operating areas.

Desired Qualities

• (MUST) Bachelor's Degree in Electronics, Computer or equivalent Engineering
• 3-6 years of experience in quality engineering or in manufacturing
• Working knowledge of product development and manufacturing processes
• Experience with quality control and test procedures for tests such as in EMI-EMC, Vibration, temperature, humidity testing is a plus.
• Experience with Altium designer and other equivalent PCB CAD software.
• Experience with any 2D schematic, wire harnessing and cable assembly design software.
• Good analytical and problem-solving skills
• Able to multi-task and able to work in a fast-paced environment
• Excellent written and verbal communication skills
• Ability to work in a cross-functional team environment
• Excellent organization and time-management

Remuneration Package

• Market competitive salary
• Growth opportunities that align with your direct ability in helping the company, rather than an arbitrary corporate ladder
• Support for skills upgrading / learning credits
• Healthcare support
• Special access to industry events
• Well-stocked pantry with nice snacks

Proposal

• Responsible on project tender and proposal
• Assist and follow up on pre and post tender clarification
• Preparation of tender submission documents and compile of proposal
• Adhere to proposal submission by deadline
• Prepare the proposal for management approval
• Assist in paper work and follow up with affiliates if necessary

Requirements

• Bachelor Degree in Business Management or other related discipline
• At least 1 year experience in project proposal or sales coordinator
• Prior experience in petrochemicals and offshore field is preferred
• Keen eye for exploring business opportunities
• Driven, passionate about sales
• Strong sales acumen
• Good in establishing rapport with all levels of people
• Able to work in fast-paced environment and meet tight schedules

For interested applicants, do apply directly ysing this link - https://beex.breezy.hr/p/bf1236d1a519-electrical-engineer

Your Role

Your role is Electrical Engineer. Your daily schedule will include frequent interactions with Mechanical and Software on Product Development and production design work, directly reporting to the Electrical Lead.

Your Job Scope

• Design and Implement sub-components of our Hovering Autonomous Underwater Vehicle.
• PCB Design of Electronics boards for interfacing, operation and control of our vehicles.
• Power electronics design to various system components, sensors and actuator systems.
• Wire harness and cabling design and production drawing generation(2D and 3D).
• Firmware development on microcontrollers such as Atmega and ARM for real-time control of hardware components.
• Bench-testing and field testing of key sensors and components for integration to our vehicles.
• Carry out intensive bench and in-water testing of our vehicles, and document performance.
• Stress testing of system components for harsh environment operations such as thermal, vibration, EMI-EMC and humidity.
• Gather user requirements in collaboration with management team and end customers.

Desired Qualities

• Bachelor's Degree in Electronics, Electrical Engineering or equivalent
• 3-6 years of experience designing and implementing Electrical Architecture of robotic systems.
• Experience with battery operated designs, embedded systems, microcontrollers, sensor and actuator interfacing.
• Experience with low voltage power electronics design for battery operated systems (power regulation, boost/buck conversion, power protection, load balancing etc).
• Experience with Altium designer and other equivalent PCB CAD software.
• Experience with any 2D schematic, wire harnessing and cable assembly design software.
• Experience with C++ for embedded systems programming and development.
• Knowledge of python is a plus for high level interfacing and algorithms development.
• Experience with git and version control systems.
• Experience with quality control and test procedures for tests such as in EMI-EMC, Vibration, temperature, humidity testing is a plus.

Remuneration Package

• Market competitive salary
• Growth opportunities that align with your direct ability in helping the company, rather than an arbitary corporate ladder
• ESOP / equity participation
• Support for skills upgrading / learning credits
• Healthcare support
• Special access to industry events
• Well-stocked pantry with nice snacks

Prior to your interview, please prepare:

• Testimonial of 1 other engineer who has worked with you
• PCB Design from a previous project

The role will consist of a technical component, with a focus on material testing as well as designing new packaging systems. You will perform various types of testing for medical packaging materials and sterile barrier systems (packaging for sterile medical devices). You will design and create prototypes to support new sales growth and customer retention and assist external as well as internal customers with technical projects/package testing and consulting. You will own and manage smooth operation of a technical development center under the supervision of a senior engineer.

Primary Responsibilities

• Perform various types of physical, mechanical, analytical and integrity testing for medical device packaging materials and packaging systems

• Ensure that testing and lab procedures are performed safely. Ensure personal safety and routinely evaluate equipment for potential safety risks

• Design and create package prototypes using 2d and 3d software based on requests / inputs received from sales team. Maintain and control proper inventory of packaging materials, test material and test equipment accessories

• Maintenance of Lab equipment - Write/update work instructions, procedures, calibration instructions and test methods as required

• Liaise and collaborate with the technical team members at other global sites on technical topics and lab related activities

• Liaise and collaborate with external test labs, sterilization partners and contract manufacturing facilities, as required

• Communicate effectively with other Oliver employees both locally and globally

• Identify gaps and constantly strive to update technical capabilities of the Technical Development Center

• Provide expertise in material selection and package design of sterile barrier systems in order to support new sales growth and customer retention

• Occasionally, travel within APAC region to support our customers in the field including trial runs, troubleshooting customer processes and technical sales activities

• Actively support customer’s technical teams on new product introductions and validations

• Support the QA department with technical assessment of CAPA investigations

• Support product change notifications for customers

• Work closely within the Technical team to develop viable packaging solutions

• Qualify/Test new materials as per ISO 11607 – Ensure capability levels through thoughtful analysis and rigorous testing

• Design new products that can deliver Six Sigma process capability levels. Support/Improve existing product portfolio

• Other duties that assigned

Basic Qualifications

• B.S in Packaging engineering, chemical or mechanical engineering preferred. Candidates with a

graduate diploma in a similar engineering discipline may also apply

• 3-5yrs experience in medical device packaging

• 2d and 3d CAD knowledge / experience desired (AutoCAD 2d and Solidworks 3d preferred)

• Ability to stand and perform physical testing required.

• Strong listening ability and patience

• Ability to adapt to different working styles and cultures

• Positive attitude, ability to work under pressure and people oriented

• Strong written and verbal communication skills. Works well with people across the organization

Preferred Qualifications

Interpersonal Skills:

• Comfortable speaking before an audience

• Requires contact with others (face-to-face, by telephone, virtual meetings, VOIP or otherwise) and working and interacting in a group or team

• Ability to read, analyze and interpret data/documents/safety rules or manuals/operating instructions or procedures/maintenance

• Ability to write in a clear and concise manner

• Ability to speak effectively, present information, responds to questions in a clear and concise manner.

Technical Skills:

• MS Office, particularly Word, Excel, PowerPoint and Outlook, Essential Functions

• Knowledge of 2d and 3d CAD knowledge / experience desired (AutoCAD 2d and Solidworks 3d)

Other Skills:

• The ability to predictably and regularly attend work and to be punctual

• The ability to read and understand documents and drawings

• The ability to work cooperatively with others

• The ability to deal politely and professionally with customers and/or coworkers

Special Requirements

Ability to travel 5-10% of the time internationally

Occasional evening / weekend work might be required (e.g. night calls with USA/EU)

CONSTRUCTION ENGINEER/QS

Islandwide, Contract Full Time

Professional, 5- 10 years exp above

Engineering

$3,500to$6,000

Monthly

Roles & Responsibilities

Responsibilities:

· Manage project management and daily site operations.

· Handling technical and engineering issues.

· Plan the manpower require for the site works.

· Mange efficient utilization of manpower, raw materials, and consumables for our construction projects at construction sites.

· Oversight of the works and resolving any technical issues/ difficulties that may arise on constructions sites.

· Plan the works at construction sites carried out are complying with safe work procedures.

· The Engineering report to project team on work progress at construction sites.

· Full time supervision at site.

· Working on construction site, could accept OT base on site requirement.

· Beside Engineer Work, & some QS work as well.

Requirements:

· Diploma/Degree/ or any BCA Relevant in engineering or equivalent

· Min 5- 10 years of Experience in Construction Engineering field.

· Leadership and organizational Responsible skills.

· Support APM/PM Skills.

· Support CAD/project, drawing and design, and Aluminum Steel Engineering for any construction knowledge.

· Great written and verbal communication skills/in terms of English Languages.

· A willingness to learn/ Hardworking excel Skills.

· Good Communication/ follow the daily instruction for the APM/PM and the site supervisor instruction.

· Hiring 2 Candidate of Construction Engineering.

· Engineer has to write structure steel and metal work

Please apply as following, and regrets only shortlisted will inform.

Thank you.

Email: [email protected]

Duties to Be Performed:

The Senior Chemical Engineer will work on designing, tendering, and monitoring the installation of bulk gas and special gas systems for industrial properties in semiconductors, electronics, biopharma, and related industries. The gas systems include bulk gases, high-purity inert gases, flammable gases, corrosive gases, hazardous gases, and related distribution networks.

The Senior Chemical Engineer will collate the client’s capacity requirements and specifications and prepare the conceptual design, make a detailed design for system capacity, configuration, schematic, P&ID, PFD, layout, distribution, and system parameters, and prepare documents like the scope of work, reports, specifications, standards, logistics, and detailed drawings for tender. He or she will review proposals from contractors and continue to support them during installation when required.

The successful candidate will work closely with other disciplines such as architects, civil, cleanroom, electrical, automation, mechanical, and construction engineers, as well as CAD/ BIM designer in designing and delivering the project.

Job / Skills Requirement:

You should have a bachelor's degree in chemical engineering or equivalent.

You should have sound experience in designing high-purity, and specialty gases and systems related to semiconductors manufacturing or similar facilities. You should be able to comprehend clients’ URS, and design with concept design, schematics, PFDs, P&IDs, routing layout, the scope of work, specifications, and functional descriptions. The experience in designing chemical systems will be definite added advantage.

Your familiarity with the Semi standards and Singapore standards, manufacturing tools, materials, and CAD/ BIM will be an added advantage.

You should be able to make presentations to clients and engineers on design, tendering, project execution, supervising progress, and quality of work.

Able to work independently.

Able to travel / relocate.

Duties to Perform:

The senior Gas Engineer will work on designing, tendering, and monitoring the installation of bulk gas and special gas systems for industrial properties in semiconductors, electronics, biopharma, and related industries. The gas systems include bulk gases, high-purity inert gases, flammable gases, corrosive gases, hazardous gases, and related distribution networks.

The senior Gas Engineer will collate the client’s capacity requirements and specifications and prepare the conceptual design, make a detailed design for system capacity, configuration, schematic, P&ID, PFD, layout, distribution, and system parameters, and prepare documents like the scope of work, reports, specifications, standards, logistics, and detailed drawings for tender. He or she will review proposals from contractors and continue to support them during installation when required.

The successful candidate will work closely with other disciplines such as architects, civil, cleanroom, electrical, automation, mechanical, and construction engineers, as well as CAD/ BIM designer in designing and delivering the project.

Requirements:

You should have a bachelor's degree in chemical engineering or equivalent.

You should have sound experience in designing high-purity, and specialty gases and systems related to semiconductors manufacturing or similar facilities. You should be able to comprehend clients’ URS, and design with concept design, schematics, PFDs, P&IDs, routing layout, the scope of work, specifications, and functional descriptions. The experience in designing chemical systems will be definite added advantage.

Your familiarity with the Semi standards and Singapore standards, manufacturing tools, materials, and CAD/ BIM will be an added advantage.

You should be able to make presentations to clients and engineers on design, tendering, project execution, supervising progress, and quality of work.

Able to work independently.

Able to travel / relocate.

Jason Marine Group Limited is a Maritime-centric Equipment and Service Provider based in Singapore, providing marine electronics and communications equipment/services and integration services for the commercial marine and offshore industries in Singapore, Asia and Europe regions.

We are seeking a Commissioning Technician to manage the design and installation of the marine electronics and communications equipment/services onboard shipping vessels, not limited to locally, offshore and overseas. He/ She will report directly to Commissioning Manager and the Energy Team in carrying out the following work and responsibilities:

• Support with implementation/ assembly/ design/ testing with system or/ and project Engineers.

• Carry out installation, termination, testing, troubleshooting, but not limited to Navigation, IT, Scada, Communication system and equipment in workshop assembly and onsite.

• Assist and/ or carry out Factory Acceptance Test & Site Acceptance Test with client.

• Contribute necessary improvements and offer advice about operational procedures.

• Work with the team to investigate problems and diagnose and repair faults, if any, in order for the equipment to work to its specifications

• Help out in the timely and accurate reports, documentation, timesheets, service reports as per company/ client format for submission and reporting.

• Work with the Service Department to resolve enquiries, if required.

• Any other associated tasks and responsibilities assigned from time to time.

Other Requirements

• Able to work under tight schedule and minimum supervision.

• Able to travel in short notice.

• Good verbal communication skill.

• Physically capable and available to work overtime including weekends and public holidays.

• Ensure a safe working environment.

• Experience in Telecommunication system in marine, shipyard, offshore is preferred. Job Title and Grade will commensurate with experience.

• Fresh candidates are also welcome as there will be onboard mentorship and On-Job-Trainings (OJT).

• Desirable overtime allowance after probation period.

Interested applicants can also send your resume/ cv to ‘[email protected]’.

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

The job holders are to work with PI and the research team to process air quality data and study small-scale dispersion of airborne pollutants in urban environment.

Qualifications

One or more of (but not limited to) the following:

• Proven as a fast learner of conducting literature search and literature summary
• Experiences of VOC speciation via chromatography and/or online real-time detection instrument (e.g., PTR-MS)
• Proficient of handling data via 2 methods among Excel, R, Matlab, Python, etc.
• Proactive in assisting and contributing to quality scientific research publications
• Keen on field studies with prior experiences
• Proficient in technical presentation, slide making, report writing, etc.
• Proven rounded and effective team player with strong initiative and ownership of the research project

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

The job holders are to work with PI and the research team to process air quality data and study small-scale dispersion of airborne pollutants in urban environment.

Qualifications

One or more of (but not limited to) the following:

• Proven as a fast learner of conducting literature search and literature summary
• Experiences of chemical characterization via chromatography (GCMS, LCMS, GCTOFMS, etc.)
• Proficient of handling data via 2 methods among Excel, R, Matlab, Python, etc.
• Proactive in assisting and contributing to quality scientific research publications
• Keen on field studies
• Proficient in technical presentation, slide making, report writing, etc.
• Proven rounded and effective team player with strong initiative and ownership of the research project

Job title: IT Engineer

Work Location: Singapore, On-Site

Position Overview:

The IT Engineer is responsible for the IT Operations and Maintenance of the company. You will work closely with our Global IT Department to ensure the optimal performance, security, and reliability of our IT infrastructure.

Responsibilities:

IT Environment and Policy:

• Ensure a seamless IT working environment by implementing and enforcing IT policies and procedures according to our company guidelines.
• Provide responsive IT Helpdesk services and conduct necessary training sessions internally to enhance team proficiency.

IT Procurement Management:

• Oversee IT procurement activities, including but not limited to laptops, desktops, monitors, accessories, network devices, and software.
• Collaborate with vendors to ensure cost-effective and timely acquisition of IT equipment and services.

Server Management:

• Install and provide support for server hardware and operating systems.
• Manage Microsoft Active Directory, ensuring user accounts, permissions, and security policies are properly configured.
• Configure and maintain essential server components such as Antivirus servers, File and Print infrastructure, and other critical services.

Networking:

• Monitor, manage and enhance WAN/LAN accessibility and security.
• Collaborate with the network team to optimize network performance and address issues promptly.
• Implement improvements to ensure the reliability and efficiency of the network infrastructure.

Security Services:

• Implement and enforce IT security policies to safeguard organizational assets.
• Conduct vulnerability management to identify and address potential security risks.

Qualification/ Requirements:

• Bachelor’s degree or higher in Computer Science or related technical field.
• Minimum of 3 years of practical experience in IT.
• Hands-on experience in networking configuration, IT device maintenance, troubleshooting, and security reinforcement.
• Familiarity with Linux operating systems and system optimization is a strong plus.
• Proactive approach to handling responsibilities with a strong sense of duty.
• Excellent communication skills to effectively interact with team members and end-users.

Job Description & Requirements

Get to know our Team:

We are living in dynamic times. Technology is reshaping how we live, and we want to use it to redefine how financial services are offered. Grab is the leading technology company in Southeast Asia offering everyday services to the masses. Singtel is Asia’s leading communications group connecting millions of consumers and enterprises to essential digital services. This is why we are coming together to unlock big dreams, and financial inclusion for people in our region is just one of them. We want to build a digital bank with the right foundation - using data, technology and trust to solve problems and serve customers. Join us if you have what it takes to help build this new Digibank with us.

Get to know the Role:

At Digibank we treat Infrastructure and operations as Software Engineering problems. Our mission is to build and progress software platforms which enables provisioning and managing of all Digibank services in safe, reliable and scalable ways. We consistently challenge the status quo, use new technologies to build platforms and tooling for engineering teams.

In this role you will make significant decisions with a huge impact on building modern banking technology. You would be part of a team, responsible for designing & architecting new solutions, finding creative ways to optimise existing solutions which will improve agility for managing hundreds of microservices infrastructure in a stable & reliable way.

If you are

• A strong believer of automating DevOps & SRE aspects like infrastructure provisioning, deployment, observability, incident lifecycle, uptime SLA etc.
• Bold to challenge, open to get challenged, curious to learn & grow

This is the right place for you!

The day-to-day activities:

• Working with Kubernetes clusters hosted in AWS
• Ability to apply DevOps practices alongside modern data technologies such as Airflow, Snowflake, Presto and DBT
• Using InfrastructureAsCode tooling like Terraform, Ansible to manage AWS & Kubernetes resources
• Engage with the data-engineering and data-science teams to help build infrastructure and develop software for reliability and scale.
• Troubleshoot priority incidents, facilitate blameless post-mortems and ensure permanent closure of incidents
• Perform analytics on previous incidents and usage patterns to better predict issues and take proactive actions
• Build and drive adoption for greater self-healing and resiliency patterns
• Design automated software and product upgrades, change management, and release management solutions
• Design, code, test and deliver software to automate manual operational work. Own your tools and services end to end.
• Be part of on-call rotation for the team’s tooling and 24x7 support coverage as needed
• Succeed, fail, and learn together with other talented people. We believe in an environment that provides an opportunity for growth and see education as an outcome of failure that gets us closer to the next breakthrough

The must haves:

• Bachelor's degree in information systems, information technology, computer science, or similar.
• 4-10+ years professional experience in a software management position.
• Experience with dockers / containers / k8s.
• Have experience working with Datalake architecture.
• Experience with configuration management tools, Ansible is preferred
• Direct production operations experience in a cloud environment.
• Experience contributing to technology and product strategy.
• Experience leading capability building initiatives across diverse areas such as infrastructure and operations automation, software quality, delivery automation and other core engineering.
• Demonstrated experience of driving operational efficiency and transparency of a growing engineering organization.

We are a Marine Communication Equipment and Service Provider based in Singapore, providing marine electronic equipment and marine communication integration solutions for offshore vessels arriving in Singapore or around the Asia region.

We are looking for a dedicated Service Engineer (Marine) to be responsible for repair and maintenance of ship Navigation, Communication, Satcom, VSAT/TVRO, PAGA/PABX and GMDSS system. Reporting to the Head of Marine Electronics, and working closely with our business partners, he/she will be involved in the installation and testing if navigation and communications equipment on shipping vessels.

Responsibilities

• Involve in project for installation of marine electronics equipment.
• Liaise/co-ordinate with shipyard for related project.
• Assist in the repair works in the workshop.
• Brief business partners on various navigational/communication system setup.
• Provide technical support for business partners.
• Prepare reports on equipment to business partners.

Requirements

• Diploma / Degree in Electronics/Communication Engineering
• 1- 4 years of Marine Experience

Research Engineer

As part of National Semiconductor Translation and Innovation Center (NSTIC), the candidate will be involved in the photonic device fabrication based on Silicon-based material platforms (Silicon-on-Insulator, Silicon Nitride, Germanium (Ge), and SiGe), Lithium Niobate, and III-V semiconductor materials. The candidate will work closely with multidisciplinary team with diverse expertise.

Responsibilities

• Develop, design, and optimize integration flow for Silicon Nitride-based and Lithium Niobate-based photonic devices, including lithography, etching, deep-trench, and dicing.
• Design of experiments (DOE) for different process integration flows.
• Liaise between design, fabrication, and testing teams to ensure smooth process integration and device fabrication.
• Metrology, data analysis, and documentation
• Present and discuss experimental data to the team

Qualifications

• Degree in Electronics Engineering, Microelectronics, Physics, or equivalent.
• Experiences in semiconductor industry, preferably in silicon photonic processes.
• Good critical thinking and problem-solving ability.
• Able to work with cross-functional team, with good communication/presentation skill.
• Able to work in a fast-paced and collaborative environment

Research Engineer

As part of National Semiconductor Translation and Innovation Center (NSTIC), the candidate will be involved in the photonic device fabrication based on Silicon-based material platforms (Silicon-on-Insulator, Silicon Nitride, Germanium (Ge), and SiGe), Lithium Niobate, and III-V semiconductor materials. The candidate will work closely with multidisciplinary team with diverse expertise.

Responsibilities

• Develop, design, and optimize integration flow for Silicon Nitride-based and Lithium Niobate-based photonic devices, including lithography, etching, deep-trench, and dicing.
• Design of experiments (DOE) for different process integration flows.
• Liaise between design, fabrication, and testing teams to ensure smooth process integration and device fabrication.
• Metrology, data analysis, and documentation
• Present and discuss experimental data to the team

Qualifications

• Degree in Electronics Engineering, Microelectronics, Physics, or equivalent.
• Experiences in semiconductor industry, preferably in silicon photonic processes.
• Good critical thinking and problem-solving ability.
• Able to work with cross-functional team, with good communication/presentation skill.
• Able to work in a fast-paced and collaborative environment

About Bruker:

Bruker is enabling scientists to make breakthrough discoveries and develop new applications that improve the quality of human life. Bruker’s high performance scientific instruments and high value analytical and diagnostic solutions enable scientists to explore life and materials at molecular, cellular, and microscopic levels. In close cooperation with our customers, Bruker is enabling innovation, improved productivity, and customer success in life science molecular and cell biology research, in applied and pharma applications, in microscopy and nanoanalysis, as well as in industrial applications. Today, worldwide more than 8500 employees are working on this permanent challenge at over 90 locations.

Today, worldwide more than 9700 employees are working on this permanent challenge at over 90 locations on all continents. Bruker continues to build upon its extensive range of products and solutions, its broad base of installed systems and a strong reputation among its customers. Being one of the world's leading analytical instrumentation companies, Bruker is strongly committed to further fully meet its customers’ needs as well as to continue to develop state-of-the-art technologies and innovative solutions for today's analytical questions.

Bruker - Innovation with Integrity.

Please visit www.bruker.com.

Bruker Singapore is seeking for a Field Service Engineer within the service organization. He/She is an ambassador of Bruker Nano Surfaces Metrology (BNSM) instrumentation and technology. Bruker Nano Surfaces Metrology manufactures the world's leading Atomic Forces Microscopes, Stylus profilers, Mechanical Testers, X-Ray Diffractometer and non-contact 3D optical microscope instrumentation. This technical role responsible for customer direct post-sale instrumentation and application support including: installation, user and application training, instrument diagnostics/fix, and post-sale applications support. Individual must be customer focused with a strong technical background enabling our customers to maintain their instrument at peak performance and maximize productivity for their intended use case.

SUMMARY OF RESPONSIBILITIES:

· Performs site surveys, pre-installation, installation of Bruker Semiconductor Metrology Tools (AAFM(NanoMet), AFMi, TSOM & X-ray) for customers both domestic and international

· Provide high level technical support to external customers at their location

· Provide on-­site training to the customers

· Interface with cross functional work teams such as field applications, customer support/services, product management, manufacturing and marketing/sales

· Develop Service technical documentation

· Create, develop, and continuously improve the customer support & applications knowledge database

· Timely and professionally handle field service calls and issues arising from the field service

· Performs basic applications support of Bruker Semiconductor Metrology Tools for customers both domestic and international

· Visits, triage with field applications scientists as appropriate

· Timely complete and submit all required paperwork

· Flexible schedule to accommodate our customer’s needs

· Effectively handle multiple priorities, organize workload, and meet deadlines

· Communicate with the customer to ensure satisfaction and implement any necessary corrective actions

· Up to 30% traveling required within Southeast Asia (at times with short notice)

· Misc. other duties commensurate with the capabilities of a Field Service Engineer

ESSENTIAL FUNCTIONS:

· 90% Technical support (Diagnostics/troubleshooting/on-site/phone/e-mail/web-ex/SAP RMAs, etc.)

· 10% Knowledge database development, delivery of training, basic application support and Escalation support (technical analysis, cross-functional engagement, plan of action, on-site support, etc…)

ADDITIONAL RESPONSIBILITIES:

· Pre-sales support

· Other duties as assigned

EDUCATIONAL/EXPERIENCE REQUIREMENTS:

· Bachelor’s degree or equivalent technical qualifications in electrical/ mechanical engineering or physical sciences. Masters or higher-level education is preferred. Metrology experience within Semiconductor Market an advantage.

· Working knowledge of MS Office, Excel. Working knowledge and ability to test and troubleshoot mechanical, electrical analog and factory Automation

· Up to 5 years of relevant Semiconductor industry experience, preferably metrology products and with hands on instrument experiences.

· AAFM, AFM and X-ray service experience or background in Technical Support preferred.

Bruker is an equal opportunity employer. We evaluate qualified applicants without regard to race, color, religion, sex, national origin, disability, veteran status, and other protected characteristics.

Job Description & Requirements

Get to know the Role:

• As a Site Reliability Engineer (SRE) you will help build a meaningful engineering discipline, combining software and systems to develop creative engineering solutions to operations problems.
• Much of our support and software development focuses on optimizing existing systems, building infrastructure and reducing work through automation.
• You’ll join a team of curious problem solvers with a diverse set of perspectives who are thinking big and taking risks.
• As an SRE you’ll be focused on running better production applications and systems.
• SRE is a key contributor to core infrastructure and functional development teams throughout the life cycle to help support software for reliability and scale.
• Key areas of focus include automation, application/platform uptime and quality, packaging/distribution techniques, platform design “operability”, analytics, deployment, adoption, and tool development, among others.
• The position will wear many hats from owning day to day health and performance, to identifying incidents/developing remediation plans, to working with open source software and experienced packaging techniques, to working with development teams and contributing to the strategic roadmap and execution.
• Candidates from a variety of software, platform, or automation engineering backgrounds will be considered for this position.

The day-to-day activities:

• Design, code, test and deliver software to automate manual operational work
• Troubleshoot priority incidents, facilitate blameless post-mortems and ensure permanent closure of incidents
• Engage with development team throughout the life cycle to help develop software for reliability and scale, ensuring minimal refactoring or changes
• Perform analytics on previous incidents and usage patterns to better predict issues and take proactive actions
• Perform the L1/L2/L3 support activities for the Production Support project with analysis and design work, including impact of requirements across all system components
• Build and drive adoption for greater self-healing and resiliency patterns
• Design automated software and product upgrades, change management, and release management solutions
• Participate in the 24x7 support coverage as needed

The must haves:

• Bachelor's degree in information systems, information technology, computer science, or similar.
• 1-3+ years professional experience in a software management position.
• Experience with dockers / containers / k8s.
• Direct production operations experience in a cloud environment.
• Experience contributing to technology and product strategy.
• Experience leading capability building initiatives across diverse areas such as infrastructure and operations automation, software quality, delivery automation and other core engineering.
• Demonstrated experience of driving operational efficiency and transparency of a growing engineering organization.

Jason Marine Group Limited is a Marine Communication Equipment and Service Provider based in Singapore, providing marine electronic equipment and marine communication integration solutions for offshore vessels arriving in Singapore or around the Asia region.

We are looking for a dedicated Service Technician/ Engineer (Marine) to be responsible for repair and maintenance of ship Navigation, Communication, Satcom, VSAT/TVRO, PAGA/PABX and GMDSS system. Reporting to the Head of Marine Electronics, and working closely with our business partners, he/she will be involved in the installation and testing of navigation and communications equipment on shipping vessels.

Responsibilities

• Involve in project for installation of marine electronics equipment.
• Liaise/co-ordinate with shipyard for related project.
• Assist in the repair works in the workshop.
• Brief business partners on various navigational/communication system setup.
• Provide technical support for business partners.
• Prepare reports on equipment to business partners.

Requirements

• Diploma / Degree in Electronics/Communication Engineering
• 1- 4 years of Marine Experience

Research Engineer

As part of National Semiconductor Translation and Innovation Center (NSTIC), the candidate will be involved in the development of heterogeneous integration process for realizing multi-functional photonic devices. The candidate will work closely with multidisciplinary team with diverse expertise.

Responsibilities

• Develop, design, and optimize die-to-wafer bonding process employing III-V semiconductor material, Lithium Niobate on Insulator (LNOI), and Si-based material platforms.
• Design of experiments (DOE) for various Die-to-Wafer (D2W) bonding methodologies.
• Liaise between design, fabrication, and testing teams to ensure smooth process integration and device fabrication.
• Metrology, data analysis, and documentation
• Present and discuss experimental data to the team

Qualifications

• Degree in Electronics Engineering, Microelectronics, Physics, or equivalent.
• Experience in semiconductor industry is preferred. Those with strong familiarity with wafer-to-wafer and die-to-wafer bonding process may be considered for a senior position.
• Good critical thinking and problem-solving ability.
• Able to work with cross-functional team, with good communication/presentation skill.
• Able to work in a fast-paced and collaborative environment

Research Engineer

As part of National Semiconductor Translation and Innovation Center (NSTIC), the candidate will be involved in the development of heterogeneous integration process for realizing multi-functional photonic devices. The candidate will work closely with multidisciplinary team with diverse expertise.

Responsibilities

• Develop, design, and optimize die-to-wafer bonding process employing III-V semiconductor material, Lithium Niobate on Insulator (LNOI), and Si-based material platforms.
• Design of experiments (DOE) for various Die-to-Wafer (D2W) bonding methodologies.
• Liaise between design, fabrication, and testing teams to ensure smooth process integration and device fabrication.
• Metrology, data analysis, and documentation
• Present and discuss experimental data to the team

Qualifications

• Degree in Electronics Engineering, Microelectronics, Physics, or equivalent.
• Experience in semiconductor industry is preferred. Those with strong familiarity with wafer-to-wafer and die-to-wafer bonding process may be considered for a senior position.
• Good critical thinking and problem-solving ability.
• Able to work with cross-functional team, with good communication/presentation skill.
• Able to work in a fast-paced and collaborative environment