• Scheduling of installation, co-ordination with customers, internally, PE, LEW and vendors, seeking approval of installation from tenants of building, accurate and timely submission of documents, etc
• Coordination work with Customers, Building Owner/Management
• To be responsible for the Implementation Activities such as preparation of proposal and submission of design, obtaining of approval, monitoring of in-house team and contractors’ work schedule and BOQ claims, I&C and using measurement tools for troubleshooting.
• Generate project documentation such as survey report/technical proposal/As-built report
• Manage weekly report tracker update and report to project manager.
• Submission of project documentation to client
• Generate project documents templates
• Prepare TP / As-Built reports
• Conduct documentation control training

Job Requirements:

• Diploma / ITE in Engineering, either in the area of communications or RF Wireless Communications
• At least 2 years of relevant experience in telecom wireless industry
• Basic RF (Radio Frequency) / Telecommunication knowledge
• Ability to operate, analyze, test and read measurements in Radio Frequency and able to use TEMS / Nemo / Site Master is essential
• Basic M&E (Electrical and Mechanical) Knowledge
• Basic cellular network communications knowledge, configuration and operations
• To perform project coordination and control duties and auditing, etc
• Able to commission / integrate / troubleshoot / test Ericsson equipment is an added advantage
• Good team work and interpersonal skills
• Hands-on knowledge on autocad drawing is an added advantage
• Good command of English
• Preferably Singaporean

Responsibilities

• Ensuring all sub-contractors comply fully with the relevant recommendations of LTA M&W requirements
• Preparing and submitting the Weekly & Monthly Quality reports.
• Follow up with conformity certificate, calibration certificate and plant calibration certificate from other agency.
• Maintaining the RIN Register and follow up with QPS for closing.
• Review daily inspection report and issuance of observation or NCR (Non Conformity Report) according to concerned department.
• To arrange QPS for inspection including the reinforcement cages, sitting out, guide wall, slurry quality (powder moisture, slurry density, viscosity & gel strength), final depth pf trench,trench profile check (koden alignment check), stop end, inserts, concrete slump, temperature, casting duration, cut-off level, ground level, backfilling (LSS) and lean concrete.
• To be physically present during Asphalt pavement work for Road diversion work.
• Study Shop drawing and liaise with design department on the design issue that may cause difficulty in production.
• To conduct mould inspection for every new mould and mould in use.
• Materials ordering
• To arrange production based on Daily Production Planning from planning department.
• Responsible for achieving the daily planned volume/productivity.
• To do prep our inspection together with production supervisor and RTO

Requirements

• Degree in any Engineering Discipline
• Minimum 5 years experience in QA/QC works in construction industry
• Experience in structural steel works or precast RC works
• Good interpersonal skills and communication skills

Our client is a prominent construction firm in Singapore, offering comprehensive and integrated services within the construction sector.

• Coordinate design drawings with consultants to adhere with requirements of the authorities.
• Review and give solutions to technical problems and plan, monitor and report shop drawing production progress.
• Handle technical submissions for materials, construction methods and C&S shop drawings.

Requirements:

• Professional Engineer Registered with the PE Board.
• Degree in Civil Engineering or equivalent.
• At least 3 years of design working experience with main contractors.
• Familiar in British and Singapore Design Standards.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Our client specializes in power solutions, ensuring the delivery and maintenance of electrical supply.

• Perform technical assistance for different components and systems in power management and backup solutions.
• Liaise with end-users for on-site installation, commission, repair and maintenance.
• Ensure on-site work are carried out in safe manner and comply to safety measures.
• Monitor on maintenance contract to ensure work is carried out timely.

Requirements:

• Diploma in Electrical/Electronics Engineering or equivalent.
• At least 4 years of experience in offering technical support in the UPS/DC Power sector.
• Strong interpersonal, communication and presentation skills.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

• Supervise, execute, and coordinate project activities until project completion.
• Ensure the project is on schedule, within budgeted cost and quality standards.

Requirements:

• Diploma in Electrical or Electronics Engineering
• At least 2 years’ experience in alarm, card access and CCTV system installation.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Job Responsibilities:

• Support and provide mechanical engineering design
• Handle design works and/or project management relevant to ACMV, Fire Protection, Sanitary and Plumbing.
• Supervise and coach a team of engineers in mechanical services for the project from concept stage, design development, contract documentation, authority submissions, site administration to project completion
• Act as either Project Manager or Team Leader in projects.
• Act as mentor to new employees.
• Provide technical assistance to engineers.
• Advise engineers on the project administration and contractual issues.
• Conduct technical discussion on common design problems with engineers

Job Requirements:

• Recognised Degree in Mechanical Engineering with PEB Singapore
• Healthcare/Data Centre/LTA experience preferred
• Strong design experience in Fire Safety
• Minimum 6 years of relevant design experience
• Good understanding of Singapore Code of Practice and local authority submission process (LTA / PUB / BCA)

Bayes advices leading technical businesses and progressive employers on talent acquisition, shaping perspectives and integrating recruitment expertise to fulfill critical and complex hires. If the role resonates with you and your professional experience complements the responsibilities listed, send your resume to [email protected]

Bayes Recruitment Pte Ltd
16 Collyer Quay, Singapore 049318
bayesrecruitment.com
EA License 10C5468 | EA Registration R2197948

Our website comprehensively shares our Privacy and Data Protection Policy, standards & compliance, and legal responsibilities. All personal data supplied will be treated in confidence, and as permissible by law. By submitting your resume for an application, you also consent that you may be contacted for future, or potential opportunities that may complement your expertise as applicable. You can opt out at any time by contacting our Data Protection Officer.

Main Responsibilities:

The candidate will be responsible to support the QA Manager in establishing an independent quality system to monitor compliance with regulatory requirements.

Other tasks include:

• The receipt and control of all relevant regulatory and technical publication documents
• Revising and updating of Quality procedures and work instructions.
• Support all external audits by customers and certification bodies.
• Conduct internal and supplier audits.
• Conduct in-house quality-related trainings.
• Work with Supply Chain on new supplier evaluation and approval.
• Perform annual evaluation of existing suppliers with Supply Chain and update Approved Supplier List.
• Support Operations and Warehouse on customer claims investigation and other quality-related issues.
• Checking existing shelf life database and updating shelf life information in SAP for specific part numbers.
• Issuing of shelf life labels for items with expiry in warehouse.
• Reviewing and preparing of all Non-Conformance Reports (NCR) for closure.
• Preparation of quality / KPI related reports.
• Updating of NCR Master-list and E-filing of all warehouse NCR records in server.
• Updating of training register and personnel training records.
• Review and inspect aircraft cabin and avionics parts at warehouse when required.
• Assist in the company annual stock take if required
• Undertaking new improvement projects to improve process quality.
• Any ad-hoc tasks assigned by the QA Manager

Requirements:

• Degree / Diploma in Mechanical / Manufacturing / Aerospace Engineering with 3 to 6 years of relevant work experience, preferably in the Aviation industry.
• Knowledge of AS9100/9110/9120 standards and FAA/EASA/CAAS/CAAC part 145 requirements is highly preferred.
• Knowledge in the applications of MS Word, Excel, PowerPoint and Access will be advantageous.
• Should possess effective communication, interpersonal and problem solving skills

We are hiring Process Engineer to be outsourced to our clients from reputable healthcare organizations.

Apply now!

Job Scope

• Develop and maintain Manufacturing/Operating Instructions and SOPs.
• Manage and troubleshoot process control system recipes/models.
• Conduct technical assessments and process evaluations.
• Investigate and resolve quality and EHS issues during manufacturing or batch record reviews.
• Implement and monitor preventive measures for process issues.
• Ensure adherence to site safety and quality standards.
• Identify and drive improvements in processes and equipment.
• Regularly update plant personnel on process changes.
• Train process technicians and engineers on procedures and best practices.
• Oversee key equipment/GMP systems, ensuring compliance during internal and external audits.

Job Requirements

• Degree in Engineering, preferably in Chemical Engineering or Degree in Science with Major in Chemistry.
• 2 - 4 years of experience Pharmaceutical/Chemical Plant with some understanding of API unit of operations
• Good knowledge of Good Manufacturing Practices.
• Excellent interpersonal and communication skills, both verbal and written
• Strong team player, adaptable and versatile with the ability to work across different cultures.

All Interested candidates are invited to email your resume in MS Word format to:

[email protected]

Please include your full working experience, education background, notice period, expected salary.

Sheryl Tan Shan Pei
Outsourcing Team
Recruit Express Pte Ltd
Company Reg. No. 199601303W | EA License Number: 99C4599

We regret to inform that only suitable candidates will be shortlisted for an interview.

About ST Engineering

ST Engineeringis a global technology, defence, and engineering group with offices across Asia, Europe, the Middle East, and the U.S., serving customers in more than 100 countries. The Group uses technology and innovation to solve real-world problems and improve lives through its diverse portfolio of businesses across the aerospace, smart city, defence, and public security segments. Headquartered in Singapore, ST Engineering ranks among the largest companies listed on the Singapore Exchange.

Our history spans more than 50 years, and our strategy is underpinned by our core values – Integrity, Value Creation, Courage, Commitment and Compassion. These 5 core values guide every aspect of our business and are embedded in our ST Engineering culture – from the people we hire, to working with each other, to our partners and customers.

About our Line of Business – Unmanned & Integrated Systems

Our Unmanned & Integrated Systems business offers holistic solutions in system engineering and integration. We pioneer maritime robotics and autonomy solutions, provide system integration for complex naval and island air defence System-of-Systems (SoS), and take care of the operation and maintenance of Command, Control, Communications, Computers Intelligence (C4I) systems. We cater to the needs of Defence, Public Safety & Security, and Commercial clients worldwide, providing seamless and innovative services that redefine possibilities.

Together, We Can Make A Significant Impact

You will work closely with other engineers, Service Delivery Managers (SDM) and Project Managers to deliver quality network maintenance services to our customers.

Be Part of Our Success

• Carry out maintenance works (servicing, repair, overhaul) on customers' operational systems.
• Perform troubleshooting and corrective maintenance work safely.
• Supervise sub-contractors to ensure high quality of work and compliance with safety work procedures.
• 24/7 standby for maintenance support when rostered.
• Other duties as assigned by Department Manager and SDM.

Qualities We Value

• Individuals with deep experience in generator, cooling and hydraulic systems maintenance may apply.
• Basic knowledge in computer networking or IT systems an advantage.
• Team player.
• Able to work independently.
• Able to work under pressure with good time management skills.
• Good written and verbal communication.
• Good interpersonal skills (interaction with customers at site will be required).
• Knowledge of SAP system an advantage.
• Singaporean only

Our Commitment That Goes Beyond the Norm

• An environment where you will be working on cutting-edge technologies and architectures.
• Safe space where diverse perspectives are valued, and everyone’s unique contributions are celebrated.
• Meaningful work and projects that make a difference in people’s lives.
• A fun, passionate and collaborative workplace.
• Competitive remuneration and comprehensive benefits.

Working Location: Sembawang (may be deployed to other camp sites)

Responsibilities:

1. Oversee, manage, and supervise both in-house teams and external contractors for all mechanical maintenance tasks, including:Daily maintenance (preventive, corrective, and breakdown).
   Transition maintenance.
   Turnaround maintenance.
   Upgrades and maintenance-related improvements.
   
2. Ensure all mechanical maintenance activities align with the company’s HSEQ standards, Maintenance Management System, statutory regulations, and industry best practices.
3. Develop, enhance, and execute the company’s maintenance management system to ensure safety, efficiency, and effectiveness, achieving optimal equipment reliability and availability.
4. Maintain and update accurate maintenance records to support robust data analysis and facilitate troubleshooting.
5. Conduct root cause analyses to address equipment or system defects and implement appropriate preventive and corrective measures.
6. Optimize and manage the inventory of critical and non-critical equipment spare parts to support mechanical maintenance needs.

Minimum Requirements:

• Bachelor’s degree in Mechanical Engineering.
• Familiarity with static and rotating equipment.
• At least three (3) years of experience in a chemical process plant.

Key Competencies:

• Strong interest and aptitude for chemical processes.
• Analytical skills to assess and resolve maintenance challenges.
• Ability to perform effectively under pressure.
• Excellent communication skills with the ability to collaborate across functions.
• Effective problem-solving capabilities.

Job description:

Customer support:

• To arrange service visiting, install, repair, troubleshooting, and relocation on site.

• To set up and dismantle equipment for demonstrations.

• To conduct equipment familiarization training for users.

• To answer service enquiries.

• To attend user’s meetings.

• To install and commission new equipment at customer’s sites.

Service administration

• To prepare service quotations, contracts, report, and invoice.

• To arrange spare parts from suppliers.

• To send / deliver repair item and spare parts.

• To collect equipment for in-house repairs.

• To deliver new equipment to customers.

• To attack and pursue outstanding debts.

• To send faulty parts to vendors for checking and testing.

• To furnish technical information and quality report to Principal.

Job requirements:

• Min. Diploma in Engineering

• Min. 1 to 2 years of experience in going clients’ sites to perform servicing

• Experience in medical device servicing is advantageous

Apply now by sending your resume to [email protected]

We regret to inform that only shortlisted candidates will be notified

Alex Goh Hock Leong | CEI.No: R1763413 l Recruit Express Pte Ltd (Healthcare & Life Sciences) | 99C4599

Mandai Estate - North Region

$1,500 - $4,000

. Collabrative works environment

. Opportunity to work on diverse and challenging projects

. Competitive compensation package

Seek skilled Building Construction project, lead projects in all scope, AutoCAD, design & drafting, join our dynamic team,,, apply now

• Well Established Company
• Basic $6000 - $6500 + Allowance + AWS + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Boon Lay
• Working day: Monday to Friday
• Working hours: 8.30am to 5.30pm
• QMS | ISO 13485 | Medical Devices

Job Responsibilities:

• Conduct assessment and review on supplier qualification, performance and process capability
• Ensure supplier quality issues are deal with, analysed, improved and follow through
• Collect, handle and follow-up on customer feedback/complaints
• Support internal, external and customer audits
• Evaluation, verification and validation of new parts/samples
• Establish and maintain inspection criteria for incoming, in-process and final products
• Identify quality issues, NCR, CAPA handling and drive continuous improvement
• Authorize the release (COC) of products, COA review & approval
• Monthly data analysis on product quality and quality objective
• Review and approval on DHR
• Participate in new projects, commercial product quality management and control
• Drive change management and control
• Other ad hoc duties as assigned

Job Requirements:

• Possess minimum Diploma/Degree in relevant subject area with 2 years’ experience in medical device QA and/or RA
• ISO 13485:2016 certified internal auditor will be advantageous
• Familiar with quality control tools

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

LIONG ZHAO GUAN (R22107632)

EA Recruitment Pte Ltd

EA License No: 21C0492

About ST Engineering

ST Engineering is a global technology, defence, and engineering group with offices across Asia, Europe, the Middle East, and the U.S., serving customers in more than 100 countries. The Group uses technology and innovation to solve real-world problems and improve lives through its diverse portfolio of businesses across the aerospace, smart city, defence, and public security segments. Headquartered in Singapore, ST Engineering ranks among the largest companies listed on the Singapore Exchange.

Our history spans more than 50 years, and our strategy is underpinned by our core values – Integrity, Value Creation, Courage, Commitment and Compassion. These 5 core values guide every aspect of our business and are embedded in our ST Engineering culture – from the people we hire, to working with each other, to our partners and customers.

About our Line of Business – Unmanned & Integrated Systems

Our Unmanned & Integrated Systems business offers holistic solutions in system engineering and integration. We pioneer maritime robotics and autonomy solutions, provide system integration for complex naval and island air defence System-of-Systems (SoS), and take care of the operation and maintenance of Command, Control, Communications, Computers Intelligence (C4I) systems. We cater to the needs of Defence, Public Safety & Security, and Commercial clients worldwide, providing seamless and innovative services that redefine possibilities.

Together, We Can Make A Significant Impact

You will be responsible for the maintenance of electronics systems onboard surface vessels and shore facilities. You will work closely with other engineers, Service Delivery Managers and Project Managers to deliver quality maintenance services to our customers. You will have opportunities to be short-listed for participation in short-term overseas attachment and training courses. You will have opportunities to manage maintenance operations at team, or workshop level.

Be Part of Our Success

• Work with the Superintendent to upkeep the systems onboard the naval platforms at the highest state of availability and readiness.
• Perform maintenance tasks onboard vessels, workshop and shipyards
• Perform defect troubleshooting on systems
• Perform installation/removal work for equipment/systems
• Perform refurbishment of electronics unit/assemblies

Qualities We Value

• Knowledge in Engineering or equivalent
• Naval related maintenance training certifications would be advantageous
• Good working knowledge and experience working on-board commercial and military vessels on underwater, mechanical / electronics / electrical systems
• Good working knowledge and experience on computer software (words, excel).
• Understanding maintenance regime and basic experience in troubleshooting system till card level
• Able to work well in a team and independently as when required.
• Able to work with challenging customers.
• Able to work outdoors and onboard naval platforms.
• Able to sail for up to a week if required.
• Singaporean only

Our Commitment That Goes Beyond the Norm

• An environment where you will be working on cutting-edge technologies and architectures.
• Safe space where diverse perspectives are valued, and everyone’s unique contributions are celebrated.
• Meaningful work and projects that make a difference in people’s lives.
• A fun, passionate and collaborative workplace.
• Competitive remuneration and comprehensive benefits.

Location: Changi (Site)

*shuttle bus service available at selected MRT station

• Undertake planning, implementation & monitoring of the work schedules according to master schedule and detailed work program
• Liaise with client, sub-contractor, consultant & in-house personnel to ensure smooth execution of project
• Monitor the activities of sub-contractor to ensure compliance with specifications
• Coordinate with subcontractors and suppliers on project implementation issues and attend work meeting, site progress meeting and safety management meeting

Job Requirements

• Minimum Degree in Civil/Mechanical Engineering or equivalent
• Minimum 5 years working experience in oil/gas industry
• Adaptable to fast-paced, long working hours
• Positive work attitude with good initiative and team work spirit, and able to work independently with minimum supervision

Interested applicants are invited to apply directly at the NUS Career Portal

Your application will be processed only if you apply via NUS Career Portal

We regret that only shortlisted candidates will be notified.

Job Description

One Research Engineer position is open in the research group of Assistant Professor Zhao Lin, at the Department of Electrical and Computer Engineering, National University of Singapore (NUS).

The Research Engineer (RE) will work closely with the Principal Investigator (PI) on visual navigation foundation model for mobile robots, exploration using reinforcement learning control, learning-based control, etc. The RE will develop and train algorithms that enable intelligent and robust autonomous navigation in unseen environments. Hardware experiments will be carried out to test and demonstrate the applications of the developed algorithms.

The initial appointment duration is 12 months, which can then be extended based on an evaluation at the end of the initial appointment.

The candidates should have a Master’s degree from a reputable university, with expertise in robot learning, reinforcement learning, and aerial robotics.

A successful candidate should have a solid mathematical background (such as in calculus, linear algebra, ODE/PDE, optimization, real analysis, probability theory, stochastic process, etc). Strong publication records in leading journals and conferences of the relevant fields, and practical hands-on experience in applying visual foundation models to real mobile robots are required.

Qualifications

• Possess a master’s degree in Computer Engineering/Science or strictly related (e.g., either Electrical Engineering, Mathematics, Communication, Mechanical, etc.)
• Have research experiences in computer vision, vision foundation model, control theory, reinforcement learning.
• Possess a strong academic record proved through coursework (especially math-intensive courses) and projects during his/her undergraduate and master’s studies.
• Proficient in C++ or Python. Familiar with machine-learning tools and packages. Familiar with various 3D simulation environments for quadrotor simulations. Familiar with ROS and quadrotor control algorithms.
• Have well-established analytical and problem-solving skills, as documented by publications that are relevant to the field of robot navigation, reinforcement learning control for robotics applications.
• Excellent communication skills as he/she is required to publish and present results at conferences and journals independently.
• Activity performed in world-class research environments is highly valued.

Our client is from Oil and Gas industry. They are looking for a Lead / Principal Engineer (Mechanical) Oil & Gas for the next phase of their business. They are located in West.

Duties:

• Lead Mechanical and HVAC disciplines for CAPEX projects, overseeing FEED consultants, EPC contractors, and vendors.
• Develop and issue design bases, datasheets, project specifications, and scopes of work for feasibility studies, FEED, and EPC projects.
• Review and evaluate proposals from consultants, contractors, and vendors.
• Validate and approve Mechanical and HVAC deliverables in CAPEX projects.
• Support regulatory approval processes and coordinate with consultants and contractors.
• Collaborate with project management, engineering disciplines, and operations teams.
• Witness factory acceptance tests (FAT) and ensure accurate engineering databases.

Requirements

• Min Bachelor’s Degree in Mechanical Engineering or any relevant field.
• Min 12 - 20 years’ experience in Oil & Gas industry, with exposure in LNG industry.

Interested candidates who wish to apply for the advertised position, please click APPLY NOW or email an updated copy of your resume/cv.

We regret that only shortlisted candidate will be notified.

Email Address: [email protected]

Recruitpedia Pte. Ltd.

EA License No: 19C9682

EA Personnel No: R2198636 (Oh Puey Xin)

• Identify and resolve problems with marine motors, auxiliary engines, steering systems, and other related components.
• Repair inboard and outboard engines, focusing on fuel, cooling, and exhaust systems.
• Perform regular maintenance to ensure the proper functioning of all shipboard systems.

Requirements:

• Diploma in Marine Engineering or equivalent.
• At least 2 years of nautical maintenance and repair experience.
• Skilled in using diagnostic tools and marine service equipment.
• Good understanding of marine engines, auxiliary engines, and cargo pumps.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

Position Summary

We are seeking an experienced IT Engineer who is passionate about providing high-quality technical support to our employees in Singapore and globally. This role is critical in providing technical support and for maintaining the hardware and software environment across the company's offices, ensuring that all technology is functioning optimally to support business operations.

Responsibilities

1. Technical Support

• Provide first-level technical support to end-users via MS Teams, email, or in-person, addressing hardware, software, and network-related issues.

2. Troubleshooting & Solutioning

• Provide basic infrastructure or network troubleshooting. Diagnose and resolve technical issues efficiently and escalate complex problems to appropriate teams when necessary.

3. System Maintenance

• Install, configure, and update software applications, desktops, laptops, TV, Meeting Room bookings and peripherals.

4. IT Documentation

• Create and maintain accurate IT documentation, including processes, procedures, and support resolutions.

5. IT Contract & Licences Management

• Review and maintain IT contracts with vendors ensuring proper approval is completed and documented.
• Review all software licences and provide periodic updates & recommendations.
• Plan and provide a table of report on upcoming licences renewals and ensuring the accounts are done correctly and on-time.

6. Asset Management

• Maintain an inventory of IT equipment and ensure accurate asset tracking.

7. Vendor Collaboration and Purchasing of IT assets

• Review need of IT requisition from users and obtain approval from user’s department head and IT head before partnering with vendors to procure hardware and software as needed.
• Procure, manage, and maintain office IT equipment and cabling to meet agreed standards, ensuring they function safely and effectively.

8. Compliance & Audits

• Conduct periodic system audits and ensure IT systems meet security and compliance standards and taking up the lead for IT Audits and second level check by peers or manager.

9. Infrastructure Support

• Assist with office infrastructure setup and maintenance, including firewalls, access points, printers, and workstations.

10. Onboarding/Offboarding:

• Support employee onboarding and offboarding, including configuring accounts and providing user training on IT tools and processes.

11. In addition, the ideal candidate should be

• Be self-reliant and take ownership of their responsibilities.
• Have high ethical standards in the role.
• Possess proficiency in English and able to communicate clearly with stakeholders and IT team.
• Exhibit excellent teamwork skills and adapt to company’s culture and practices.
• Maintain a high standard of work and adhere to service timelines to ensure operational efficiency.
• Identify areas for improvement in the IT support processes and implement changes to enhance service delivery.
• Experienced in using and supporting Microsoft 365, MS Teams and Sharepoint support.
• Ensure good follow-up to case closure.

12. Qualification & Experience

• Diploma or Degree in Computer Science, Information Technology, or a related field.
• Minimum of 3 years of experience in tech support, desktop support, or a similar role.
• Proficiency in Windows, Linux, and Mac OS; familiarity with both PC and Mac hardware and software is essential.

If you are someone that has the skills and interest to take lead, we welcome you to apply for this role.

Responsibilities:

• Coordinate with the consultant and monitor work progress and schedule
• Monitor daily work activities of the various subcontractors to ensure proper adherence to job site safety policies and procedures
• Work closely with the team to fulfil all requirements and expectations during testing and commissioning with consultant
• Ensuring that installation and operations conform to standards and customer requirements
• Estimating material, labor, or construction costs for budget preparation
• Maintaining electrical equipment
• Maintenance & Installation of filtration equipment, including pumps, filters, UV systems and ozone generating equipment.
• Fault diagnosis and servicing of specialist swimming pool chemical dosing systems.

Requirements:

• Electrical qualification or experience preferred
• At least 5 years of experience in related field & local experience
• Able to work independently

PROJECT ENGINEER will be under service line, the appropriate quality check, the compilation of accurate and customized results reports and other deliverables.Working in workshop and vessels.
Good communication skills with Ship Owners and Superindents.
Good time Management and work Independently.
To perform any other duties & Responsibilities assigned by superiors from time to time.
Ability to demonstrate and implement cost -saving measures.
Ability to lead to manage project operations, schedule and specifications.
Requirements:- Min 5 Years experience .- Knowledge of MS office.- Able to work OT.- Excellent coordination skills.-

Company's Profile
Julian Grey’s client is a global semiconductor equipment provider, specializing in inspection solutions for various industries. They have offices in APAC and are seeking motivated individuals to join their growing team.

Responsibilities

• Create and deploy software solutions for high-speed automation systems.
• Architect, program, test, troubleshoot, and verify software applications.
• Assess and define system performance metrics and requirements.
• Software support to field service teams, update and optimize software for equipment.

Requirements

• Expertise in C/C++ programming and multi-threaded Windows development with Visual C++.
• Strong knowledge of electronic components, motion control, and interfacing with inspection systems.
• Proficient in mathematical principles and algorithm development.

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Interested Applicants

Please WA Jian Wei @ 87389860
Shortlisted candidates will be notified

Quek Jian Wei
Reg No. R22110928
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

Job Description & Requirements

1. Support in inspection with CMM, i-Vision.

- FA Inspection

- First piece set up inspection

- Routine inspection (in-coming, in-process, out-going)

2. Fixture inspection (New fixture) to ensure acceptable usage.

- Inspection fixture

3. Support in CAPA/Root Cause Analysis for both internal and external quality issue.

- Data collection

- Data analysis

- Root Cause identification

- Solution establishment

4. Generate internal and supplier quality performance report.

- Monitoring of internal production quality issue

- Monitoring of sub-con/supplier quality issue

- Review, analyse and evaluate data on the above quality issue

5. Lead MRB review and disposition.

- Perform review on the rejection, evaluate and disposition of rework, scrap or UAI

6. Participate in supplier evaluation and qualification.

- General supplier management

- Supplier audit (new and existing supplier)

7. Support in audit (internal and supplier).

- Perform auditor role during internal audit

- Auditing of major supplier with high quality issue

8. Lead in internal calibration management.

- Keep track on the calibration due date and take initiative to recall for calibration

- Maintain internal IMTE to date

9. Support on Documentation Control.

- Inspection report

- Material Certificate

- Treatment COC

- Internal inspection record

- Perform GDP

10. Oversee quality activities and action plan.

- Arrangement of inspection priority

- Updating of inspection status

- Liaise with cross function on quality issue

- Problem solving through team work

11. Support QM to lead the Quality Department.

- Perform as a lead of Quality Department

- Take over the HOD role in the absent of QM

Further scope will be added as per necessary prior to changes of needs with reference of current capabilities, knowledge, skill and performance.

12. AS9100, ISO14001 capability.

- Understand all clauses of international standard.

- Execution of these international standard.

- Maintenance of organisation QMSJob Description & Requirements

13. Able to be outstation in Southeast Asia if required

Design /drafting of various Electrical layouts and schematics using solid work electrical software as directed by PD/AE and/or as per the requirement of the assigned job.

· 3D modeling of electrical components, equipment and other related items as per the requirement of project.

· Provide the technical support to site Engineer.

· Creating Draft of Electrical Single Line / Panel Diagram according to customer technical specification.

· Maintain, update and rectify drawings as needed and ensure its accuracy and completeness.

· Respond promptly to inquiries and requests relating to the drawings.

· Helps PD/AE in resolving interferences/clash reports.

Requirements:

· Diploma in Electrical Engineering or equivalent.

· Good working knowledge of mechanical/electrical aspect of generator system and control panels.

· Experience in internal/ Client model review.

· Working experience of drawing software like solidworks electrical and draftsight.

· Able to read and understand site layout drawings and general arrangement drawing of genset.

· Fresh graduates are welcome to apply.

** 0830am -1800pm

** 5-day work weekly

** Two ways of shuttle bus service provided at Jurong East MRT

Only for PR and Singaporean.

Interested and suitable candidate kindly click quick apply. Resume will be routed to HR department. We regret that only suitable candidate will be notified.

Role:Network Engineer

JD:

Responsibilities:

Design and Document Preparation
• Provide networking expertise, revise solution architecture drawings and diagrams
• Prepare the design documents including Low Level Design (LLD) documents for OPS Network and SMRC Network, firewalls configuration, IDS/IPS and hardening states.
• Prepare ITD (Test procedure) document for OPS Network and SMRC Network
• Prepare new or update all the relevant documents (e.g. Maintenance or User Manual, Config/Rollback/Troubleshoot Procedure) required for the OPS Network (FMC, FTD (firewalls)) and SMRC Network (OFL+ONL)
Integration Support:
• The Contractor with support configuration changes to system platforms in factory and customer sites.
• The Contractor will work on the configurations of interfaces, zones, firewall policies, IPS, application filtering for single firewall (Offline)
• The Contractor will support the integration of Offline HSE and Offline Remote Site Switches with Offline SMRC Servers e.g. PIM/PAM, SNMS/SMS/NMS/LMS, RADIUS, NTP, SIEM etc (Offline)
• The Contractor will support the integration of Online AMTS New HSE & Remote sites switches with Offline SMRC Servers e.g. PIM/PAM, SNMS/SMS/LMS, RADIUS, NTP, SIEM etc. (Offline)
• The Contractor will assist in the SMRC network configuration, Integration, testing, verification and troubleshooting of the following technology used in SMRC Network (Online SMRC)
• The Contractor will work on the configuration, integration, testing, verification and troubleshooting of Online OPS Network selected firewalls / external interfaces (particularly from the Firewall application content inspection (Layer 4 through Layer 7)) (OPS Network)
• The Contractor will configure, optimize and test the transparent firewall failover functionality running in HA and standalone mode with online interfaces for the traffic impact (OPS Network)
• The Contractor will support External Support Platform (ESP) setup, including network platform configuration & Integration (Layer 2 and Layer 3) of switch, configure firewall with S2S VPN, DMZ, NAT and Internet using ACL policies, IPS policies, URL & Content filtering policies, VPN policies, NAT policies, hardening of switch and firewall as per the hardening guideline
• The Contractor to provide troubleshooting support during online deployment & integration (OPS Network)

Hardening Support:
• The Contractor will assist on the hardening of Online / Offline SMRC network equipment and firewalls
• The Contractor will assist on the hardening of Online / offline OPS firewalls (OPS Network).
• The Contractor will troubleshoot / fix if there are any operational / unknown issues occurs in the environment due to the hardening configuration on network devices (Offline, Online SMRC)
• The Contractor will support in case any issue with hardening of online firewalls / any operational issue occurs due to the hardening of online network devices (OPS Network).