Responsibilities:

• The candidate shall carry out Outline and Detailed Mechanical Designs which are cost-effective and meet the requirements of the client’s specifications, and which can be purchased, installed and commissioned effectively.
• The candidate shall produce and check all design deliverables, including Design Specifications, Schedules, Drawings, and Calculations, and must have a good knowledge of CAD and BIM design.
• The candidate shall review clients, or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle, from front-end engineering design (FEED) through detailed design, technical assurance, testing and commissioning, and final handover.
• Challenge client asset standards where a clear opportunity exists to use an alternative, cost effective process or product without reducing the overall outcome.
• The candidate shall carry out tender bid analysis for various items of plant.
• The candidate shall complete deliverables on time and to budget and, where necessary, manage the deliverables of others to ensure deliverables dates and budgets are maintained.
• The candidate shall manage/monitor the work of others in the organisation or project team as necessary, including checking and/or reviewing their work.
• The candidate shall prepare fee estimates, design programme and liaison with clients to agree project deliverables.
• The candidate shall liaise with other disciplines within the organisation or the project team to ensure that all design elements are fully integrated.
• The candidate shall carry out quality control review of design calculations, General Arrangement Drawings, 3D models and Piping & Instrumentation Diagrams, TOTEX and CAPEX and preparing technical mechanical specification sections.
• The candidate shall carry out subcontractor or third-party design reviews until these are accepted.
• The candidate shall ensure that standard practices are utilised wherever possible.
• The candidate shall ensure provide services which focus on customer satisfaction.
• The candidate shall ensure that the design fully considers all health and safety requirements, including, but not limited to, CDM 2015 regulations.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.
• The candidate shall ensure that designs take account of sustainability and environmental issues.

Preferred Qualifications

• Degree in Mechanical Engineering.
• The Candidate shall have about 3 years of experience in mechanical design works, preferably with contractor experience.
• Experience in water and/or wastewater treatment processes and relevant mechanical design criteria will be an advantage.
• General experience of other discipline criteria associated with water and/or wastewater treatment including civil, process, EICA and project management in other discipline criteria associated with water and/or wastewater treatment, including civil, process, EICA and project management, will be an advantage.
• General understanding of client regulatory environments.
• Budget management experience will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Primary Responsibilities:

• The candidate shall review clients, design engineers and/or third-party design and information to determine suitability and liaise with those concerned to obtain further information if necessary.
• The candidate shall have experience gained by delivering projects across the complete project lifecycle from front end engineering design (FEED) through to detailed design, technical assurance, testing & commissioning and final handover.
• The candidate shall produce design layouts which are cost effective, meet the requirements of the specification and which can be constructed and commissioned effectively.
• Ensure that standard practices are utilised wherever possible.
• Provide estimates and feedback for proposals department.
• The candidate shall undertake outline and detailed designs and specifications for electrical, instrumentation and control works.
• The candidate shall provide day-to-day technical input as part of a team of engineers.
• The candidate shall ensure that the design output is completed in accordance with the agreed scope of work, timescales, and budgets.
• The candidate shall liaise with other disciplines within the organisation or the project team to fully integrate all design elements.
• The candidate shall provide written reports of system options.
• The candidate shall write specifications for electrical systems.
• The candidate shall prepare calculations and technical/equipment specification documentation.
• The candidate shall monitor the installation of designed equipment/systems to ensure compliance with design specifications and safety codes.
• The candidate shall have good knowledge of electrical design (LV and HV systems), motor control centres/switchgear, electrical installations and systems within industrial/process environment, HAZOP assessments, DSEAR/ATEX installation practice, production of SLD/BCD’s, earthing and bonding and familiarity with current UK design standards, including industry-specific standards and working practices.
• The candidate shall have proficiency in designing appropriate digital analysis packages and electrical design software such as Trimble/Amtech. Also, able to write and review technical documentation (technical specifications, control philosophies, URS)
• The candidate shall work to the procedures and processes to ensure the continuing development of the department.
• The candidate shall ensure designs take account of environmental issues.
• The candidate shall ensure that the design takes full regard for all health and safety requirements.

Preferred Qualifications

• Degree in Electrical Engineering.
• The Candidate shall have about 3 years of experience in electrical design works, preferably with contractor experience.
• Experience working on water and sewage treatment projects will be an advantage.
• Ability to rationalize designs and produce economic plant layouts.
• Ability to present technical proposals clearly, confidently and convincingly.
• Able to work independently in producing the project deliverables to meet project timeline.
• Proficient in written and oral communication with good interpersonal skills.

Please follow us on LinkedIn if you want to know more about Binnies Singapore.

https://www.linkedin.com/search/results/all/?heroEntityKey=urn%3Ali%3Aorganization%3A81524833&keywords=Binnies%20Singapore&origin=ENTITY_SEARCH_HOME_HISTORY&sid=ha%3B

Position: Production Engineer / Executive

• Location: Tanjong Penjuru
• Working hours: Mon to Fri from 7:30am to 5pm
• Salary: $3,500 - $4,000

Requirements:

• Min 5 years working experience in manufacturing environment.
• Able to supervise and lead the subordinates.
• Computer literate.
• Knowledge in ISO is an advantage.
• Diploma or Degree in Manufacturing / Electrical /Mechanical / Engineering discipline

Responsibilities:

• Organize, monitor and ensure manufacturing processes operated with minimize manufacturing costs through effective utilization of manpower, equipment, facilities, materials, and capital.
• Initiates, implements, and manages the processes improvement program based on best practices in the metal drum making industry, with an emphasis on productivity and product quality.
• Ensure all manufacturing processes are adhering to all Regulatory and Statutory Requirement.
• Work with the HR Department and assure that employee grievances are addressed in a timely fashion.
• Conducts employee performance reviews based on job descriptions to determine competency, knowledge, and contribution of the maintenance technicians and engineering staff.
• Maintain and ensure work safety and practice. Also continually improve safety records by addressing both physical safety issues and employee safety attitudes.
• Maintain and improve housekeeping in all areas
• Evaluate, train and maintain individual skills (including work performance) are keeping up to date with best engineering management concepts and practices.
• Ensure on time submission of overtime record to HR Dept for computation of monthly salary
• Establish and prepare process documentation such as work instruction, process specifications and assist on the quality plan.
• Prepares reports, analyzes data, and makes recommendations for improving plant operations and solving production-related problems.
• Ensures that subordinates are adequately trained, equipped, and motivated so that the maintenance program can be accomplished in a safe, timely, and cost-effective manner.
• Conducts employee performance reviews based on job descriptions to determine competency, knowledge, and contribution of the staff.
• Communicate regularly with all production and maintenance teams, both individually and as a group, to ensure good two-way communication concerning production and maintenance issues.
• Assist in the hiring of production personnel.
• Maintain and update operating manuals for all the manufacturing equipment and facilities.
• Maintain and update operating training manuals for all manufacturing processes.
• Perform any other ad-hoc projects or tasks to be assigned by the HOD / Management from time to time.

Chin Wai Loon Reg No: R24121618

The Supreme Hr Advisory Pte Ltd EA No: 14C7279

MAIN RESPONSIBILITIES:

The Field Service Engineer is responsible for providing technical field assistance in maintenance, operation, equipment installation and startup and/or shutdowns for all CPM processes. The Field Service Technician must have strong business and communications skills to establish and maintain strong relationships with the customer. Analytical and problem-solving skills are just as essential to this position.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

· Provide technical field assistance, in maintenance, installation, operation, and startup for CPM equipment; prepare customer field report after each trip.

· Perform inspections of existing CPM equipment during plant shutdowns, assist plant/contractors with recommended repairs/parts and provide each customer with a field report.

· Evaluate fabricated product when asked; prepare non-conformance report when necessary and work with internal and external customers to resolve issues.

· Provide technical training to relevant customer and responsible for tracking customer claim.

· Work integrally with internal employees and external customers to promote the CPM Aftermarket service, to meet group initiatives and objectives.

· Assist contractors in the erection of CPM equipment at customer site.

· Identify customer's needs and sales opportunities to help future growth.

· Participate in company meetings in order to increase communication, understanding, and teamwork.

· Cross train with engineers/technicians to learn technical processing information.

· Observe all customer and OSHA safety rules.

· Perform other related duties as required and assigned.

QUALIFICATION AND SKILLS:

· Associate degree or equivalent from a two-year college or technical school, preferably in Engineering.

· A minimum of 2 years of experience in animal feed or biomass related manufacturing industry.

· Good written and verbal communication skills.

· Establish and maintain effective working relationships with co-workers, customers, and vendors.

· High integrity and ethics.

· Working knowledge in AutoCAD.

· Required knowledge of Microsoft Office.

· Be able to communicate in English fluently and at least one local language.

· Ability to travel on need basis – domestically or internationally and up to 50% of the time.

Company's Profile
Julian Grey’s client is a global semiconductor equipment provider, specializing in inspection solutions for various industries. They have offices in APAC and are seeking motivated individuals to join their growing team.

Responsibilities

• Support the selection and design of components for inspection systems.
• Accurate documentation and supplier compliance with specifications.
• Provide troubleshooting support and manage the integration of new designs into manufacturing processes.

Requirements:

• Proficient in CAD software for electrical and schematic design.
• Experience in designing, fabricating, and testing PCBs and PCBAs is beneficial

Follow us for more updates, interview tips!
https://www.instagram.com/juliangreygroup/
https://www.linkedin.com/company/juliangreygroup/
https://www.facebook.com/juliangreygroup/
Our telegram channel for job opportunities - https://t.me/jobopportunitiessg

Interested Applicants
Please WA Jian Wei @ 87389860
Shortlisted candidates will be notified

Quek Jian Wei
Reg No. R22110928
Julian Grey Corporate Advisory Pte. Ltd.
EA License No: 19C9568

PM Singapore is currently looking to expand the CQV capabilities. This role will be supporting one of our many clients in the field of commissioning, qualification and validation work within the Life Sciences space.

Your day to day role would involve the following activities:

• Planning, Performance, and Coordination of Computer System Validation, Equipment Qualification, Temperature Controlled Objects (Freezers, Incubator etc), Clean Utilities Validation and cleaning validation in accordance with internal procedures and industry standards.
• The qualification includes, FAT, SAT, IQ, OQ, PQ of any additional modifications of existing manufacturing process equipment, package units (e.g. Ultrafiltration Unit, Chromatography Columns, autoclave, FIT testers), commercial off the shelves (COTS) analytical instruments, freezers,
• Create, review and approve equipment qualification and analytical instruments lifecycle documentations, e.g. FAT, SAT, IQ, OQ, PQ protocols and reports, risk assessments, technical specifications.
• Can lead investigation revolving around discrepancies identified during qualification activities.

We would like to hear from candidates who have:

• Relevant experience in validation activities (including the creation, pre-execution approval, execution, post-execution review, and post-execution approval of all validation lifecycle documents)
• Leading daily validation meetings with cross functional teams in resolving validation issues.
• Experience in equipment qualification including analytical instrumentation and manufacturing equipment.
• Work experience in Pharmaceutical or BioPharma industries
• Hands on validation execution experience
• Able to execute activities in cGMP environment, including cleanrooms or technical areas.

Position

We are looking for L2 Application Ops Engineer to join our Application Services department to help us implement DevOps and accelerate the bank’s transformation. This a very hands-on technical role to drive continuous improvement initiatives on top of day-to-day BAU support. We want someone with fresh and relevant ideas who is passionate about learning new things and wants to develop themselves further.

Mission

The L2 Application OPS Engineer is responsible to ensure production stability and contribute to the continuous improvement of the applications in scope. You will manage incidents, changes and requests as per the company's standards and SLA to ensure a high quality of service. You will also be involved in major operations as per the requirements of the bank.

As we are covering the bank’s global operations, you will work in rotational shifts* and also be occasionally doing on-call support** during non-business hours. You will also be occasionally required to work on planned activities on the weekends or public holidays as per our operational requirements. This will be an opportunity to have a better perspective of what can be further improved in production!

*Rotational shifts: Members in the team will rotate accordingly around 3 shifts (time will shift to an hour later during the daylight saving time period in the year).

**On call support: This covers 7 consecutive days during non-business hours to manage escalated incidents and to work on planned changes, weekend included.

• Morning: 7am-4pm
• Afternoon:2pm-11pm
• Evening: 5pm-2am

Main responsibilities

You will mainly be responsible for:

Performing all run activities in respect of the company's process, ensuring:

– SLA and priorities are respected

– Appropriate reaction, in line with the severity of an incident or escalation.

– The company process are dully followed (service request, change, incident, problem management)

– Management of technical issues, escalations and ensuring good level of delivery

– Primary operational technical support and assist the functional support teams

– Good collaboration between various teams within ITS and also BLI

Continuous improvement of service

– Propose improvement and solution to reduce repetitive tasks

– Improving complex operations (DRP, Migrations, Major maintenance etc.)

– Improving reliability and quality of our systems (automation, monitoring, alerting, security, RCA etc.)

– Reducing time-to-market by implementing CICD pipelines where possible

– Improve and standardize existing workflow processes and framework

– Bridging the gap between Dev and Ops

Managing knowledge within the team

– Share the knowledge within AS teams through the WIKI

– Promoting knowledge sharing within the organization (trainings, documentations etc.)

Driving the most complex operations & ensures they are well prepared (involvement on DRP test, WIP, etc…).

– Act as global coordinator main events.

– Review of major releases roadmaps

– Ensure post checks are documented, performed and report is shared

Qualifications and Profile

The position requires a minimum of 3 years relevant experiences as a production support or at least infrastructure support or development role.

Functional

• No functional skills required. Experience in a banking environment is obviously a plus.

Technical and process

• Preferred

• Minimum 3 years of experience with UNIX environments

• Minimum 3 years of experience in scripting languages such as Python, Powershell

• Minimum 2 years of hands on experience in any of these tools and technologies such as Ansible, Gitlab, Azure Devops, Docker, Kubernetes

• Experience with task schedulers such as Control-M

• Good understanding of IT ecosystems and application architectures

• Knowledge about

• CICD pipelines, ITIL practices, Agile practices, Lean

• Observability tools such as Grafana, Kibana, Prometheus, or Dynatrace is a plus

Soft skills

• Fluent in English, French is a plus
• Good analytical and problem solving skills
• Proactive and able to propose new ideas
• Positive attitude towards continuous learning and improvement
• Team player
• Curious about new technologies

Next Step

Prepare your updated resume and expected package.

Simply click on 'Apply here' or email to [email protected] to drop your resume

All shortlisted candidates will be contacted.

Prasant Sirohi

EA License Number: 91C2918

Registration Number: R22106307

Our client is a leading startup in the semiconductor field and a leader in designing ultra low-power microprocessors. The Singapore office houses the Product Development (PD) team which will be working on projects.

Staff Engineer, Design Verification

Responsibilities:

You will be responsible for verifying digital and mixed-signal designs, including systems-on-chip with multiple CPUs, digital signal processors, security hardware, and other logic for IoT applications.

• The right candidate will be a self-starter who assumes full ownership of DV tasks and delivers high-quality results.

• Develop test plans at block, sub-system, and chip level.

• Execute SoC-based verification at full-chip.

• Write C-based lib packages and tests.

• Architect and implement scalable and reusable test benches using SystemVerilog and UVM.

• Develop comprehensive test cases, stimulus generation, and checkers to achieve high coverage.

• Automating the test environment for randomized testing and scoreboarding.

• Utilize advanced debugging techniques to identify and resolve design and verification issues.

• Perform root-cause analysis and work with design teams to fix identified issues

• Define and track functional and code coverage metrics to ensure thorough verification.

• Ensure that verification quality meets or exceeds industry standards and project requirements.

• Edge-based AI inference is preferred.

Requirements

• BSEE /MSEE 5-8 years Degree of experience in block, sub-system, and full-chip verification

• Should have delivered multiple chips functioning to Specification.

• Identify and manage verification deliverables, milestones, and schedules.

• Proactively identify potential verification risks and develop mitigation strategies.

• Collaborate with design, architecture, and software teams to understand and verify design intent.

• Communicate verification progress, issues, and results to stakeholders and management.

• Strong in understanding multiple architectures, integrating 3rd party IPs/VIPs, and working with mixed-signal designs with low-power design and verification challenges

• Strong understanding/exposure to Design Verification for low-power battery-operated designs is highly desired.

• C-based verification in an SoC environment is required

• Experience with ARM processor-based designs and low-power design techniques is a plus.

• Languages: SystemVerilog (UVM), Verilog, C/C++, Python, Perl or Makefile

• Technologies: ARM M/RISC-V (Preferred), AMBA AXI/AHB/APS, DMA, Flow Control, Serial Devices, Qo5

• Preferred technologies: MIPI(CSI/DSI), Crypto, OTP, DSP, Low-Power

Interested applicants, kindly send in a copy of your updated resume in WORD document to [email protected] stating your current and expected remuneration together with notice period required to current employer.

You can also contact Vincent Low for a confidential discussion at 6749 4236.

EA Personnel Registration No: R1324700

Will be part of Operation & Support Team to support Project implementation and Maintenance.

The key responsibilities are as below:

Job Description:

Project:

• Support Project Team in Project implementation
• System setup, configuration and testing
• Perform any other duties as assigned.

Maintenance:

• Perform CUAS Preventive and Corrective maintenance works at restricted Areas.
• Provide support services in operation exercise.
• Perform functional check and/or repair on testers and unit under Test.
• Perform any other duties as assigned.

Requirements:

• NITEC / Higher NITEC / Diploma in Mechanical, Electronics or Computer Engineering
• Fresh graduate are welcome to apply
• Experience in Electronics, PCB-related, electrical & networking would be advantageous
• Able to work over the weekend and standby for fault call if required
• Able to interpret schematics, technical manual and drawings for maintenance works.
• Ability to use analytical skills and a "hands-on" person.
• Good interpersonal skills, proactive and work well with others.
• Possess class 3 driving license will be advantageous.

Interested candidates can click on 'Apply' or send updated resume to [email protected]

We are regret that only shortlisted candidates will be notify

About the team:

MediaTek’s Physical design team is responsible to implement top quality digital backend design for our advanced process chips which have billions of transistors. Passionate talent who are eager to join this fast-growing IC design industry and grow together with our passionate team are welcome to apply!

Job Description

• Working on 6nm and below advanced process project APR and Timing/PI sign-off
• Take the TOP and PM role for the complicated hierarchical chip (more than 20M inst plus 500+ macros)
• Take the Block or Block coordinator role for complex blocks
• Do early prediction for critical APR/Timing/PI issues

Job Requirements

• APR/Timing/PI hands-on/tapeout experience on complicated hierarchical chip
• TCL/Perl/Python/C/C++ programming skill
• Have advanced process(n6 or below) experience is a plus
• Excellent communication and team work spirit

Location: One North, Singapore

Important Note: This advertisement is meant to source suitable candidates for future openings for this position.

About the company

MediaTek Incorporated (TWSE: 2454) is the world’s 5th largest global fabless semiconductor company. Joining MediaTek means becoming part of a team that powers over 2 billion ICs worldwide, enriching and enhancing everyday life. Our chipsets are integral to a wide range of products, from smartphones, mobile devices to home and IoT devices, in entertainment and multimedia products, and provide connectivity and communication solutions that keep people connected with friends and their families with access to online resources. Working at MediaTek offers you the opportunity to contribute to the world through the devices we use in our daily lives – it’s more than just a job, it’s a chance to make a meaningful impact.

COMPANY DESCRIPTION

Singapore Management University is a place where high-level professionalism blends together with a healthy informality. The 'family-like' atmosphere among the SMU community fosters a culture where employees work, plan, organise and play together building a strong collegiality and morale within the university.

Our commitment to attract and retain talent is ongoing. We offer attractive benefits and welfare, competitive compensation packages, and generous professional development opportunities all to meet the work-life needs of our staff. No wonder, then, that SMU continues to be given numerous awards and recognition for its human resource excellence.

RESPONSIBILITIES

• To apply machine learning techniques to improve the accuracy of the inferencing system
• To select and analyze specific Android brand/model on their compatibility with the side-channel inferencing system
• To evaluate the performance overhead and accuracy of the inferencing system prototype

• Bachelor or Master Degree in Computer Science, Information Technology, Information Systems, Computer Engineering, or related disciplines
• Project experience in machine learning or Android security is a plus
• Good communication skills in English
• Advanced level of programming and software implementation, especially in C/C++ and Java
• Good understanding of existing machine learning techniques
• Good understanding of Android architecture and Android executables
• Good analytical, technical, and problem-solving skills
• Self-motivated and willing to work in a term

#LI-JN2

Test Engineer

Our reputable client is looking for a System Test Engineer (IT) to handle test plan, design, planning and setting up Test Lab. The incumbent is required to lead Installation, checkout, integration and testing (ICIT) at customer’s sites.

Responsibilities:

• Involved in System Test Plan and System Engineering Design.
• Responsible for Planning and Setting up Test Lab and conduct Factory Acceptance Test.
• The ability to perform Troubleshooting and Resolving System Faults and Perform On-Site Acceptance Test.
• Involved in lead project activities and coordinate with multiple stakeholders which includes suppliers, customers and other teams of staff for the project implementation

Requirements

• Strong in performing System Test and Design.
• Strong knowledge in handling Infocomm Technology, RedHat Linux, Virtual Environment, Network Security.
• Experience in handling System Test Plalnning and Troubleshooting.
• Minimum 2 years of System Test experience.
• Degree in Electrical & Electronics Engineering / Computer Science or equivalent
• Singaporeans Only.

We respect your privacy and all communication will be treated with confidentiality.

Please contact us or apply in-confidence to us with you updated MS Word Resume to : [email protected]

Yong Jeline (Reg. No. R1101621)

STAR CAREER CONSULTING PTE LTD (EA License: 20C0353)

Our manufacturing company designs and manufactures metal precision components, molds, and precision-pressed materials.

Of course, people with Process experience are of the utmost importance but they have to be able to speak English and be able-bodied for the job posted.

Malaysian PRs welcome to apply.

Job Description & Requirements

1) Read and interpret blueprints, technical drawings, schematics, and computer-generated reports.

2) Confer with engineers and other personnel to implement operating procedures, resolve system malfunctions, and provide technical information.

3) Responsible of setting the machine to meet the First Article base on the customer print, tolerance, and dimensions.

4) Responsible of assisting the Machine operator to meet their goals.

5) Responsible to edit program to suit different machines will be preferred

6) Specify system components or direct modification of products to ensure conformance with engineering design and performance specifications.

7) Research, design, evaluate, install, operate, and maintain mechanical products, equipment, systems and processes to meet requirements, applying knowledge of engineering principles.

8) Oversee installation, operation, maintenance, and repair to ensure that machines and equipment are installed and functioning according to specifications.

9) Conduct research that tests and analyzes the feasibility, design, operation and performance of equipment, components and systems.

10) Develop, coordinate, and monitor all aspects of production, including selection of manufacturing methods, fabrication, and operation of products.

Job Description

1. Oversee the works on equipment structures, installations, deployments, facilities, and equipment being deployed at sites.

2. Plan and work out the resource provision requirements, work, schedule, and Standard Operating Procedures (SOP) for works at sites.

3. Review planned work schedule and method statements prior to commencement of site work activities.

4. Ensure that works are carried out accordingly to design, meeting the safety, health, environmental and comfort requirement for stakeholders.

5. Identify defects and damages at the site infrastructures, including equipment and facilities, as well as theft, accidents, and incidents.

6. Carry out safety training to instil safety awareness. Ensure safety rules and regulations at sites are adhered to by all site personnel.

7. Be part of Safety Committee and ensure compliance to safety, health and environmental requirements including Authority Code of Practices (COP) and WSH, MOH & MOM Guidelines.

8. Resolve any unexpected problems or difficulties that may arise at sites.

10. Prepare regular reports to update site progress, resource utilisation, requirements, past and on-going activities, etc.

Requirements

1. Minimum bachelor’s degree with at least Six (6) years’ relevant field safety experience in supervision of installation and maintenance of roadside and Civil and structural coordination with government/utility agencies and other contractors.

2. Experience as a safety auditor/inspector in ensuring Environmental, Safety and Health practices are complied with.

3. Strong analytical and problem-solving skills, resourceful and meticulous.

4. Highly motivated and pro-active with the ability to work both independently as well as in a team.

5. Proficient in Microsoft Office (Outlook, Word, Excel, and PowerPoint for Windows.

6. Good verbal communication and writing skills in English.

7. Be expected to travel regularly between office and sites.

8. Prepared to work on site and perform night work based on project needs.

WhatsApp: +65 90820021 (Kyler)

Email: [email protected]

5 Days (Mon-Fri)
830am-5pm
$2,800-$3,800 + $120 Transport Allowance
Gambas Crescent, Nordcom 1, Singapore

Responsibilities:

• Attend to client side to solve their machineries issue

Requirements:

• Knowledge of Electrical & Mechanical
• Few years of hands-on experience on repair & servicing of machineries
• Able to travel within short notice
• ITE or diploma Cert

The Supreme HR Advisory Pte. Ltd | 14C7279

Gan Kai Le | R23112683

• Working Hours: Monday-Friday [8.30am - 5.45pm]
• Location: Kaki Bukit
• Salary: $3,000-$4,500

Requirements:

• Degree/Diplomas in Mechanical / Mechatronics Engineering
• Minimum 2 to 3 years in managing and developing local/oversea Sales accounts in the Automation, Semiconductor or Consumer Electronic industries.
• Relevant technical experience in manufacturing process, automation & semiconductor industries an added advantage.
• Regional travelling is expected

Jobs Scope:

You are responsible for the sales & program management of multi- million dollars automation equipment business and providing excellent customers fulfillment, meeting quality and cost goals.

• To provide Sales Projection and Forecast
• Identify business opportunities to expand customer base
• Identify and develop potential customer to increase market share and sales revenue.
• Conducts sales calls, prepares and performs product presentations and RFQ process.
• To formalize the quotation, submission to customer and follow up.
• Develop a sales strategy plan for business expansion and attending industry events to build relationships with key prospects
• To provide leadership and organization skills in coordinating activities of various teams.
• Maintain the effective communications and coordination with customers and within the company
• To establish rapport, relationships with customers and providing excellent customers management services
• To maintain constant communication and liaison with customers on future projects

Interested applicants can email your CV to [email protected] or whatsapp to +65 89249206

The Supreme HR Advisory Pte. Ltd || 14C7279

Chua Jie Ying (Cai Jie Ying), Evelynn || EA Personnel License R24120580

Roles & Responsibilities

• Collaborate with consultants and subcontractors to review shop drawings, samples, and method statements, ensuring all stakeholders are informed of any updates or changes.
• Participate in project and technical meetings, addressing site issues with owners and consultants to maintain smooth project progress.
• Verify on-site work aligns with approved drawings, specifications, and regulatory requirements, and ensure subcontractors promptly rectify any non-compliance.
• Resolve site challenges with consultants, subcontractors, and suppliers swiftly to minimize construction delays.
• Ensure project documentation is up-to-date and prepared for ISO audits.
• Work closely with the safety department, adhering to all safety frameworks and guidelines.
• Support the site management team in project planning and coordination.
• Develop and manage work schedules to optimize construction operations.
• Prepare and organize documents for submissions to authorities, including CONQUAS, RI, and TOP.
• Analyze tender and construction documents, specifications, and contracts to fully understand project requirements.
• Identify and manage critical project factors, including scheduling and productivity metrics.
• Foster teamwork and actively contribute to a collaborative, cross-functional work environment.
• Communicate effectively, both verbally and in writing.
• Demonstrate independence, initiative, and strong motivation in completing assigned tasks.
• Provide guidance and mentorship to new or junior team members.
• Possess at least five years of relevant experience in a similar role.

Field Service Engineer

5 Days (Mon-Fri)
830am-5pm
$2,800-$3,800 + $120 Transport Allowance
Sembawang

Responsibilities:

• Attend to client side to solve their machineries issue

Requirements:

• Knowledge of Electrical & Mechanical
• Few years of hands-on experience on repair & servicing of machineries
• Able to travel within short notice
• ITE or diploma Cert

Chew Xing Shan Reg No: R22107044

The Supreme HR Advisory Pte Ltd EA No: 14C7279

WhatsApp: +65 83592812 [Shannon]

Engineer

Working Days: 5 Days A Week (Monday – Friday), 8.30am to 5.30pm, Saturday may need work half day if work required (can claim OT)
Office at City Hall, may need work at site
Salary: $5000 to $7500

Requirements
Minimum of 5 years of relevant site / building construction experience.

Roles & Responsibilities
To coordinate with consultants / subcontractors on the shop drawings / samples / method statements and keep all involved parties updated of the latest changes.
To attend to project / technical meeting and resolve site issues with owner / consultants for the site progress to proceed smoothly.
To verify the work done on site are in accordance with the approved drawings / specifications / authority’s requirement and ensured that the subcontractor carry out rectification for non-compliance.
To resolve site issues with consultants / subcontractor / supplier ASAP to minimise delay to the construction progress.
To ensure that the related documentations are updated and ready for ISO audit.
To cooperate with the safety department and carry out the assigned duties within the safety framework.
Assist site management team in project Planning & coordination.
Plan and schedule work sequences for construction operation.
Arrange and prepare documents for authorities’ submission for Conquers, RI, TOP etc.
To study tender / construction drawings, specifications, and contracts to understand project requirements.
Understanding of critical project criteria related to schedule & productivity.
Able to provide guidance to new staff / junior staff.

Chew Xing Shan Reg No: R22107044

The Supreme HR Advisory Pte Ltd EA No: 14C7279

WhatsApp: +65 83592812 [Shannon]

Field Service Engineer

Salary: $2,800 - $3,800 + $120 Transport Allowance

Working Days: Mon - Fri (8:30am - 5pm)

Working Location: Sembawang

Responsibilities:

• Attend to client side to solve their machineries issue

Requirements:

• Knowledge of Electrical & Mechanical
• Few years of hands-on experience on repair & servicing of machineries
• Able to travel within short notice
• ITE or diploma Cert

Email: [email protected]

Tan Yong Zhi (Jackson) | Reg: R24124461

The Supreme HR Advisory Pte. Ltd | EA No: 14C7279

Engineer

Working Days: 5 Days A Week (Monday – Friday), 8.30am to 5.30pm, Saturday may need work half day if work required (can claim OT)
Office at City Hall, may need work at site
Salary: $5000 to $7500

Requirements
Minimum of 5 years of relevant site / building construction experience.

Roles & Responsibilities
To coordinate with consultants / subcontractors on the shop drawings / samples / method statements and keep all involved parties updated of the latest changes.
To attend to project / technical meeting and resolve site issues with owner / consultants for the site progress to proceed smoothly.
To verify the work done on site are in accordance with the approved drawings / specifications / authority’s requirement and ensured that the subcontractor carry out rectification for non-compliance.
To resolve site issues with consultants / subcontractor / supplier ASAP to minimise delay to the construction progress.
To ensure that the related documentations are updated and ready for ISO audit.
To cooperate with the safety department and carry out the assigned duties within the safety framework.
Assist site management team in project Planning & coordination.
Plan and schedule work sequences for construction operation.
Arrange and prepare documents for authorities’ submission for Conquers, RI, TOP etc.
To study tender / construction drawings, specifications, and contracts to understand project requirements.
Understanding of critical project criteria related to schedule & productivity.
Able to provide guidance to new staff / junior staff.

WhatsApp: https://wa.me/6591044149 (Shermaine)

Siah Sze Ming Reg No: R24125414

The Supreme HR Advisory Pte Ltd EA No: 14C7279

Engineer

Salary: $5000 to $7500

Working Days: 5 Days A Week (Monday – Friday), 8.30am to 5.30pm, Saturday may need work half day if work required (can claim OT)

Office: City Hall, May need work at site

Roles & Responsibilities

• To coordinate with consultants / subcontractors on the shop drawings / samples / method statements and keep all involved parties updated of the latest changes.
• To attend to project / technical meeting and resolve site issues with owner / consultants for the site progress to proceed smoothly.
• To verify the work done on site are in accordance with the approved drawings / specifications / authority’s requirement and ensured that the subcontractor carry out rectification for non-compliance.
• To resolve site issues with consultants / subcontractor / supplier ASAP to minimise delay to the construction progress.
• To ensure that the related documentations are updated and ready for ISO audit.
• To cooperate with the safety department and carry out the assigned duties within the safety framework.
• Assist site management team in project Planning & coordination.
• Plan and schedule work sequences for construction operation.
• Arrange and prepare documents for authorities’ submission for Conquers, RI, TOP etc.
• To study tender / construction drawings, specifications, and contracts to understand project requirements.
• Understanding of critical project criteria related to schedule & productivity.
• Able to provide guidance to new staff / junior staff.

Requirements

• Minimum of 5 years of relevant site / building construction experience.

Email: [email protected]

Tan Yong Zhi (Jackson) | Reg: R24124461

The Supreme HR Advisory Pte. Ltd | EA No: 14C7279

• Basic Up to $3500 (depends on experience)
• Transport allowance & Commission, with AWS & Bonus, Increment
• Mon – Fri / 8.30am – 5.30pm
• Office at Woodlands
• Training provided for no experience

Job responsibilities:

• Develop new corporate accounts & service existing clients
• Prepare proposals, product demonstrations and training

Requirements:

• 1-3 years of B2B sales experience
• Min. Diploma in Engineering field
• With Class 3 driving license

For consideration, kindly submit your CV by clicking “APPLY Now” or email to [email protected]

**Only shortlisted candidate would be notified**

Teo Hui Yee | R22105757

Engineer

Working Days: 5 Days A Week (Monday – Friday), 8.30am to 5.30pm, Saturday may need work half day if work required (can claim OT)
Office at The Adelphi, Singapore (City Hall), may need work at site
Salary: $5000 to $7500

Requirements
Minimum of 5 years of relevant site / building construction experience.

Roles & Responsibilities

• To coordinate with consultants / subcontractors on the shop drawings / samples / method statements and keep all involved parties updated of the latest changes.
• To attend to project / technical meeting and resolve site issues with owner / consultants for the site progress to proceed smoothly.
• To verify the work done on site are in accordance with the approved drawings / specifications / authority’s requirement and ensured that the subcontractor carry out rectification for non-compliance.
• To resolve site issues with consultants / subcontractor / supplier ASAP to minimise delay to the construction progress.
• To ensure that the related documentations are updated and ready for ISO audit.
• To cooperate with the safety department and carry out the assigned duties within the safety framework.
• Assist site management team in project Planning & coordination.
• Plan and schedule work sequences for construction operation.
• Arrange and prepare documents for authorities’ submission for Conquers, RI, TOP etc.
• To study tender / construction drawings, specifications, and contracts to understand project requirements.
• Understanding of critical project criteria related to schedule & productivity.
• Able to provide guidance to new staff / junior staff.

The Supreme HR Advisory Pte Ltd || 14C7279

R22111009 Cheng Kai Ling