Job Description

1) Supervise the work of sub-contractors and work closely with other site operations staff to meet the project schedule.
2) Ensure that works are executed in accordance to specifications.
3) Coordinate with all M&E subcontractors to resolve all technical problems in order to achieve the desired overall project objective.
4) Work together with other project team members to coordinate/resolve technical issues.
5) Identify discrepancies between M&E, Structural, ID, Architectural and Client provisions.

Requirement

1) Minimum 3 years of experience as M&E Engineer in construction related field
2) Diploma/Degree in Mechanical or Electrical Engineering or degree in relevant subject.

Job Purpose

1. Overall in charge for all Planned Preventive Maintenance as well as Corrective

Maintenance works related to Track, Track Foundation, Trackbed and 3rd Rail System in

SMRT

2. Ensure all Line Maintenance works (PM & CM) are complied with approved quality

procedure, work instruction ( ISO 9002 Standard)

3. To achieve and maintain Key Performance Indicator set by Permanent Way Management.

Responsibilities

1. Responsible for all staff’s welfare, attendance, disciplinary matters, safety and maintenance

work matters.

2. To submit weekly maintenance programme to LM.

3. To prepare monthly report on team man-hours

4. To upkeep and maintain the office.

5. To coordinate with Chief Controller on all fault reports and arrange for proper deployment

to execute the work.

6. To plan out all Correction & Preventive Maintenance works and ensure it is carried out

promptly and comply to approved quality procedure and WIs.

7. To check, compile Daily Work Record submit by staff.

8. To conduct and brief staff on Toolbox briefing

9. To carry out project implementation as and when assigned by supervisor.

10. To perform PIC & PM roles.

11. To attend to Emergency work when call by Supervisor.

12. To assist LM on Track Quality report by :

- Reviewing and verify patrol reports.

- Assist with fault card

- Monitor and priorities assessment of track defect and quality.

- Input work request into Pway CM list.

- Monitor & coordinate work done in Pway CM list.

Job Requirements

1. Higher NITEC / NITEC / NTC preferably in Mechanical Engineering.

2. Preferably 3 years relevant working experience in technical work. Fresh graduates are welcome to apply.

Skills

1. Ability to work under pressure.

2. Self-motivated, resourceful and organized.

3. Able to work independently.

4. Possess strong interpersonal & communication skills.

5. Ability to communicate effectively in English, and work safely in a team with reference to the respective

6. Risk Assessments.

7. Experienced and confident in managing contractors.

JOB DESCRIPTION

Responsibilities:

• Ensure proper risk assessment is in place to provide a safe working environment for workforce by periodically reviewing risks and hazards associated to workplace, executing control measures and communicate effectively to workforce.
• Respond to technical queries from subordinates to account for timely project completion by consulting relevant parties such as mould loft and engineering department for practical solution.
• Monitor quality of welding and NDT completion on end products to prevent carry over work to next station by preforming on site checks and reviewing NDT records.
• Set daily targets for workforce to achieve to account for timely project completion by monitoring daily output and conducting daily reviews of the results.
• Study production drawings to spot possible mistakes or possible fabrication issues to ensure production schedule can be met without unexpected delays by detailed discussion and review of drawings with technical staffs.
• Prepare weekly report on progress and KPI to ensure project progress in on track by monitoring block status and compiling production progress data from site.
• Identify bottlenecks to ensure no unexpected delays to project progress by conducting meetings with subordinates, analyzing weekly reports and formulate optimal production flows for any issues identified.
• Review manpower allocation and effectiveness to ensure project progress is on track by analyzing daily and weekly KPI against progress, discussing with managers should additional manpower or reallocation of manpower is needed.
• Performs supervision on site to ensure fabrication work have been safely executed accordingly to drawings and quality requirements to account for timely project completion by checks on the floor, communicating and getting feedback from workforce.
• Identify the production capacity and plan station schedule to ensure accordance to sequence by comparing to hullshop master schedule and hullshop historical productivity data.
• Set the KPI and manpower allocation for each station to achieve required schedule by analyzing workforce and facilities capabilities and historical date and previous projects.
• Study project requirements, identify any gap that exists with current hullshop practices and propose recommendations to close the gaps to ensure no unexpected delays to project schedule by conducting reviews and meetings with QA and QC personnel.
• Ensure Standard Operation Procedures (SOP) in place so that work can be performed according to project requirements by communicating SOP's to workforce.
• Determine block fabrication sequence to ensure most effective way to fabricate blocks by analyzing drawing and 3D model and holding discussion with production and mould loft team.
• Ensure proper lifting plan is available for blocks to account for safe block lifting by advising engineering lifting team on block fabrication method in advance.
• Review subordinates competency to ensure effectiveness in performing work by analyzing productivity data, non conformance received and feedback from QA, QC and clients.
• Take active role in Incident Investigation to find root cause and proper preventive measures are implemented by conducting interviews with injured person(s) and witnesses, analyzing accident scenes and other investigative processes together with HSE Team.
• Propose training required by workforce to prevent shortfall in certain roles by compiling workforce skills and comparing with production requirements.
• Participate in Safety Innovation Programs by actively contributing to department Safety Innovation Team

JOB REQUIREMENTS

Requirements:

• Degree in Engineering
• At least 3 years of relevant working experience, preferably in marine/ offshore industry
• Knowledge of functional and operational requirements related to design of all types of ships and offshore vessels
• Knowledge and experience of his engineering field
• Knowledge of regulatory and class requirements
• Able to read and understand engineering drawings
• Possess good communication and interpersonal skills
• Possess supervisory skill to coach and motivate staff
• Able to work in a team
• Proficient in Microsoft Office and engineering design software (e.g. Tribon, GEMS)

Seatrium - Tuas Boulevard Yard

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium (SG) Pte. Ltd. and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Requirements:

1. Expert in Microsoft BizTalk version 2016 or above.

2. At least 7 to 12 years of development experience in which Minimum 6 years of experience with BizTalk Server, orchestrations, maps, pipelines, port configuration, adapters, performance, and scalability turning, etc.

3. Expertise in microservice frameworks such as SpringCloud, Play + Consul + Kong, and SSM + Dubbo + ZK.

4. Expertise in OpenAPI, Nginx, Dubbo, Nacos, Redis, MySQL, Oracle, MongoDB, RocketMq, ElasticJob, Ignite Cache, SharddingDB, OAuth2, and Alibaba Cloud services (OTS, ONS, DTS, SLS, RDS, OSS, KMS, MSE, K8S). Skilled in designing high-performance, distributed microservice systems.

5. Familiar with development tools such as IntelliJ IDEA, PyCharm, Git, MeterSphere, Postman, and collaboration tools like Coding, Google Drive, Yuque, DingTalk, Notion.

6. Familiar with Technologies: Java 17, Dubbo 3.0, Springboot, Spring Security, OAuth2, Zookeeper, Mybatis, Redis, ShardingJDBC, Ignite Cache, ElasticJob, Alibaba Cloud native components (OTS, ONS, DTS, SLS, RDS, OSS, KMS, MSE, K8S)

7. Experience in applying source control management with Github.

8. Proven delivery experience in Agile software development using industry standards like Test-Driven Development, static code analysis, and test automation with high code coverage, coding reviews, CI/CD, feature flags, etc.
Experience in Agile methodologies such as Agile Scrum, Kanban, or any DevOps frameworks.

9. Experience in enterprise software architecture design principles like Clean Architecture and Domain Driven Design.

10. Extensive experience in smart contract development and blockchain technologies pertinent to financial applications.

11. Experience in AWS services - S3, API Gateway, RDS, etc.

12. Ability to speak and write in Chinese as the incumbent requires to liaise with the China HQ counterparts/personnel for work or project related matters.

Responsibilities:

1. Strong understanding of Software Development Lifecycle and familiar with various automation tools for developing digital pipelines (CI/ CD pipelines)

2. Work with developers and the IT team to oversee the code releases

3. Design and develop continuous automating, and deployment

4. Extensive collaboration ranging from technical analyses to deployment and monitoring is handled, with the focus to enhance overall system reliability and scalability

5. Stay on top of industry trends and best practices whilst recognizing opportunities for automation, design development, and other solutions in a comprehensive manner to boost operational efficiency

6. Adaptive to take on a variety of work

7. Manage code quality and security policies

Responsibilities:

1. Implement on the Solana blockchain for UI-based integrations using the API and Enable a capture log for the Webhook integration in Ayehu Eyeshare

2. Closely work in Design and develop smart contracts tailored for lending and borrowing functionalities.

3. Collaborate with front-end developers to integrate blockchain features with the user interface and ensure a seamless experience to integrate with ITPA.

4. Experience / Knowledge in ITPA – Stackstorm, Ayehu Eyeshare, Arago HIRO

Requirements:

• Experience / Knowledge in blockchain development with Ayehu eyeshare

• Fresher with Solana blockchain knowledge, including programming languages (e.g., Rust), and ecosystem is preferred

• Degree in blockchain / Relevant

• Ability to speak and write in Chinese as the incumbent requires to liaise with the China HQ counterparts/personnel for work or project related matters

ENGIE Services Singapore is a leading provider of Integrated Facilities Management solutions (IFM), property management, operations and maintenance, specialized rail engineering works, sustainable solutions and FM Consultancy services. With strong presence in various counties across South East Asia, we operate across mission-critical industries - aviation, transportation, healthcare, education, government and commercial.

ENGIE understands the integrated role of facility management and the value of it can be expanded beyond the traditional approach. As a total FM, specialized engineering and sustainable real estate solutions service provider, ENGIE offers a comprehensive range of technical, digital and support services customisable to best suit your unique needs.

• Lead and manage a team of Technical Officers for all addition and alteration (A&A) and project works.
• Plan, organize, co-ordinate and implement A&A and project work timely and ensure compliance to all authority and client's requirement.
• Liaise with sub-contractor and vendor for quotation.
• Liaise with client's appointed officer on all issues related to the A&A and project work.
• Prepare drawings and involve in all feasible studies of all potential work with client and submit proposal.
• Provide technical guidance to all team members and client.
• Review and update all existing and new drawings as per changes.
• Assist and support the Facilities Manager in all areas.
• Any other ad-hoc duties as and when assigned by supervisor.

Requirements:

• Degree in Mechanical Engineering or any related discipline.
• Minimum 2 years of working experience in the related A&A field or facilities management industry.
• Good knowledge of ACMV.
• Good knowledge of Autocad.
• Independent with good communication skill.
• Has a good safety mindset and displays good WSH behaviour.

Responsibilities:

• Fully responsible for Netlist-to-GDS physical design implementation of low power chips

Requirements:

• Bachelor/Masters Degree in Electrical/Computer Engineering
• 3-6 yrs Experience in physical design with tape-outs
• Knowledge of complete Netlist-to-GDS flow, Synopsys/Cadence tools like ICC or Encounter
• Good in script programming with Perl, TCL/TK or other languages

Project Management

• To resolve all technical and non-technical issues.
• To ensure the tracking and monitoring of items per contractual requirement.
• Responsible for submission and monitoring of technical drawings, method statements and proposals.
• To ensure construction meeting client & regulatory requirements.
• To carry out short-term planning to meet site progress.
• To co-ordinate, program and monitor site work, materials, plant & equipment.
• Carry out project objectives to align with company goals.
• Reduce material wastages on site and maximise usage of machineries/equipment.
• To control the allocated direct workforce effectively i.e. no. of direct workers and overtime etc.
• Follow approved construction method that is cost effective, productive & without compromising on Quality.
• Meet targeted progress of works so as to achieve the intended cash flow.

Technical Understanding

• Understands the drawings and scope of works
• Understand the implications of different technical choices so as to meet the project objectives.
• Involving in providing value engineering solutions basing on his knowledge.
• To have knowledge in the preparation of engineering project proposals and method statements.

Job Requirements

• Candidate must possess at least Degree in Engineering (Civil) or equivalent (Recognized by PEB).
• Experience in leading a team or subcontractors would be advantageous.
• Strong communication skills.
• Highly committed and motivated individual.
• Versed in PUB(WRN) projects with more than 5 Year(s) of working experience in the related field is an advantage.
• Candidate with comparable qualification will be considered for Project Manager post.
• Fresh graduates are also welcome to apply.

Please apply here: https://talent.sage.hr/jobs/12fc69c2-7012-4edc-b214-bb9c2ded1da2

Applicants will need to include a Cover Letter and CV with publication list.

Applications will be reviewed on a rolling basis, with final submission 20 January 2025.

We are particularly looking for IC Design Research Engineers with the following backgrounds:

- Digital IC Design

- Analog IC Design

As an IC Design Research Engineer, you will design and innovate secure circuits and systems for next-generation low-power IoMT devices and sensors, focusing on hardware security, and smart computing and connectivity platforms.

Imperial College London and Nanyang Technological University (NTU) are seeking Research Engineers and Research Fellows to join the exciting new Imperial/NTU CYber Protection for HEalthcaRe (IN-CYPHER) research programme on the cybersecurity of connected medical devices and systems.

The successful candidates will join the research programme which represents a collaboration between the United Kingdom and Singapore and will be based at the newly established Imperial Global Singapore (IGS) housed within the unique CREATE campus.

Positions will be initially for 2 years fixed term (subject to 6-month probation) with potential for extension.

Informal enquiries are greatly welcome. You are encouraged to send an e-mail to Dr Viktor Schlegel, Deputy Programme Director [email protected], together with an indication of the specific position you would like to apply for.

Questions about the recruitment process, should go to Paige Noyce, Associate Director [email protected].

Positions are based in Singapore at Imperial Global Singapore at the National Research Foundations Campus for Research Excellence and Technological Enterprise (CREATE) located on the campus of the National University of Singapore.

Job Description & Requirements

• Coordinate with consultant CM, PE, RTO in daily activities, monthly claim, site progress updating, site inspection, testing, and discussion, etc
• Responsible for planning and monitoring of work progress
• Prepare master program and construction sequence for client review, prepare method statement and drawings discrepancies, review project specification and technical clarification
• Handling technical, feedback, suggestions, and engineering problems on site
• Target and ensure the timely and smooth progress of works within the budget time frame
• Coordinate internally with inter-department and externally with clients & consultants
• Update and submit a monthly project report, cash flow and prepare for the extension of time request if required
• Attend management meetings and raise issues that required solutions on-site Oversees construction at site to meet the project progress and quality goals
• Prepare monthly works done calculation claim with Clients and ensure that project schedule is being met & cost control
• Oversee all site projects operations, functions, and requirements, Coordination, supervision & monitoring the progress of the project works on site, manpower mobilization, materials planning & ordering
• Coordinate with the contractor, suppliers on all project implementation issues and attend site meetings when required, and to ensure for all submission is submitted in time
• Attend meetings, conduct site inspections on work progress to ensure quality control in accordance to meet authority requirements

Job Description & Requirements

• Coordinate with consultant CM, PE, RTO in daily activities, monthly claim, site progress updating, site inspection, testing, and discussion, etc
• Responsible for planning and monitoring of work progress
• Prepare master program and construction sequence for client review, prepare method statement and drawings discrepancies, review project specification and technical clarification
• Handling technical, feedback, suggestions, and engineering problems on site
• Target and ensure the timely and smooth progress of works within the budget time frame
• Coordinate internally with inter-department and externally with clients & consultants
• Update and submit a monthly project report, cash flow and prepare for the extension of time request if required
• Attend management meetings and raise issues that required solutions on-site Oversees construction at site to meet the project progress and quality goals
• Prepare monthly works done calculation claim with Clients and ensure that project schedule is being met & cost control
• Oversee all site projects operations, functions, and requirements, Coordination, supervision & monitoring the progress of the project works on site, manpower mobilization, materials planning & ordering
• Coordinate with the contractor, suppliers on all project implementation issues and attend site meetings when required, and to ensure for all submission is submitted in time
• Attend meetings, conduct site inspections on work progress to ensure quality control in accordance to meet authority requirements

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Assistant Electrical Engineer
• Working Location: Cleantech Loop (Jurong West)
• Working Hours: 5 days (Monday to Friday 9AM – 6PM)
• Salary Package: Basic Salary up to $3,000 + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Design and develop hardware for battery protection circuits, including choosing and controlling contactors and relays.
• Create and develop battery sensor circuits, focusing on circuit design, component selection, and testing/calibrating sensors for voltage, current, and temperature.
• Develop software for battery protection schemes in the Battery Management System (BMS), covering protections for over/under voltage, current, and temperature.
• Evaluate the battery's State-of-Charge (SoC) and develop the related firmware in the BMS.
• Research, compare, and select the appropriate microcontroller unit (MCU) to implement the BMS firmware.

APPLY NOW!!!

• Higher Nitec/Diploma in Electrical or Power Engineering, or equivalent.
• Experience in designing and testing BMS protection circuits.
• Firmware development skills for MCU in battery protection.
• Skills in designing and testing measurement circuits in BMS.
• Experience with sourcing and procuring electrical components.
• Skills in project planning and implementation.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #71570 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Job Description

• Industry/ Organization Type: Shipbuilding and Repairing Service Provider
• Position Title: Ship Repair Engineer (Marine)
• Working Location: West (Nearest MRT: Clementi)
• Working Hours: 5.5 days (Mon-Fri: 8 am-5 pm, Sat: 8 am-12 pm)
• Salary Package: Up to SGD 4500 + AWS + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Conduct repair operations and oversee them meticulously onboard vessels, in port areas, anchorages, or shipyard settings.
• Manage and oversee the scheduling and execution of projects to ensure prompt completion.
• Perform assessments and determine cost estimates for repair requests.
• Understand technical drawings.
• Generate detailed technical and service reports, compile worklists, and maintain comprehensive documentation.
• Foster strong, collaborative relationships with clients and colleagues across all organizational levels.

APPLY NOW!!!

• Min. ITE in Marine / Mechanical Engineering
• Min. 3 years experience in a similar capacity in marine industries
• Proficiency in Microsoft Office
• Comfortable working on weekends if required

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #66173 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Celine Tan | EA Reg No.: R1873694

Job Description

• Industry/ Organization Type: Engineering
• Position Title: Mechanical Assistant Engineer / Mechatronics Assistant Engineer
• Working Location: Woodlands
• Working Hours: 5 days’ work (Mon – Fri: 8am to 6pm)
• Salary Package: Up to $3000 + AWS
• Duration: Permanent Role

Key Responsibilities

• Perform electrical wiring including installation, servicing and troubleshooting of machine equipment
• Identify and document issues in assembly and testing phases
• Conduct on-site machine commissioning and client training
• Complete in-house automation machine assembly and wiring
• Analyze and solve machinery issues during testing and commissioning

APPLY NOW!!!

• ITE/Diploma in Engineering or related field
• Individuals without experience but with a keen interest in engineering are encouraged to apply

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #66189 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Key Responsibilities:

• Provide technical support in carrying out preventive and corrective maintenance work on CCTV cameras and backend systems (e.g. network, server storage, Windows OS, video content analytics)
• Attend to service requests from customers promptly and professionally
• Act as single point of contact for all customer enquiries
• Liaise with relevant parties and users on the repairs and adjustments of cameras
• Carry out on-site equipment installation, testing and commissioning as required
• Liaise with principals or suppliers for spare parts
• Work with principals, suppliers, system engineers to resolve technical issues
• Conduct product demonstration to customers
• Candidate will be scheduled for on-call support rotation
• Other duties as assigned
• Comply with the company’s Safe work procedures at all times

Competence (Knowledge, Skills and Abilities):

• Skills in trouble shooting technical problems related to the company’s products
• Skills in relating to and servicing the end-users with a win-win mind set

Requirements:

• Strong technical knowledge with and certification on in-house products
• Able to deal with routine tasks and may perform tasks with some level of complexity
• Take decisions for own tasks in defined degree of freedom
• Able to solve problems in most cases and within guidelines
• Works independently within guidelines, defined procedures and direction
• Advantageous to possess Class 3/2B license
• Strong commitment to meeting customer’s SLA

Education & Experience:

• Minimum Higher NITEC in Security Systems Integration or a Diploma in Electrical, Electronics and Computer Engineering
• 2 years’ experience in a similar environment

For personal data protection (PDP) related matters, pls refer to our PDP policy via corporate website at oconnors.co Personal Data Protection Policy.

Job Description

• Industry/ Organization Type: Manufacturing / Construction
• Position Title: Project Engineer
• Working Location: Senoko
• Working Hours: 5 days (Monday to Friday, 8.30 AM – 6 PM)
• Salary Package: Basic Salary up to $2,800 + Transport Reimbursement + Mobile Allowance + Performance Bonus
• Duration: Permanent Role

Key Responsibilities

• Report to the Project Director on the financial aspects, timelines, and resource allocation for project operations.
• Keep thorough records and verify the precision of all drawings and plans to meet project and client demands.
• Participate in meetings with clients and site visits.
• Build and nurture positive relationships with clients.
• Perform additional duties as directed by superiors.
• Any other ad-hoc duties as assigned.

APPLY NOW!!!

• Minimum Diploma in Electrical Engineering or equivalent
• Has 1-2 years of relevant working experience
• Proficiency in AutoCAD and/or Microsoft Project is an added advantage

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #67096 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Description

• Industry/ Organization Type: Engineering (O&G)
• Position Title: Assistant Engineer
• Working Location: Pioneer
• Working Hours: 5 days (Mon to Fri 8.30AM – 6.15PM)
• Salary Package: Basic Salary up to $2,500 + AWS + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Assist in the installation, maintenance, and repair of marine equipment and systems, including engines, pumps, and other mechanical components.
• Support senior engineers in conducting routine inspections and diagnostics to ensure optimal performance and adherence to safety standards
• Maintain accurate records of maintenance activities, inspections, and repair work
• Prepare reports and documentation as required for compliance and operational needs
• Any other ad-hoc duties as assigned

APPLY NOW!!!

• NITEC or Diploma in Mechanical Engineering, or a related field
• Knowledge of AutoCAD is an advantage
• Experience in prior O&G companies is a plus

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #71679 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Rachael Lee | EA Reg No.: R2093131

Job Description

• Industry/ Organization Type: Manufacturing/ Production
• Position Title: Mechanical Design Engineer
• Working Location: East (Closest MRT - Ubi)
• Working Hours: Monday to Friday, 9am – 6pm
• Salary Package: Up to $4500
• Duration: Permanent

Key Responsibilities

• Design and develop bespoke semi-automated and fully automated machines tailored to specific requirements.
• Oversee project coordination and manage timelines to ensure timely delivery.
• Participate in client meetings to discuss requirements for new projects and project proposals.
• Provide support during the manufacturing assembly process and assist with customer buy-off.
• Manage the entire project lifecycle, from initiation to completion

APPLY NOW!!!

• Must possess a Degree/Diploma in Mechanical/ Mechatronics Engineering
• Must be familiar with SolidWorks
• Minimum of two (2) years of relevant work experience.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #70609 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Markus Tan | EA Reg No.: R24124040

· Responsible for all conceptual design, mechanical design, cost control, fabrication parts and BOM generation of automated equipment.

· Support RFQ proposal, documentation for manual, ECN, work instruction, specification and test plan.

· Responsible for project co-ordinating and project timeline control

· Good knowledge of using solid works 3D cad software a must.

· Knowledge in motor, pneumatic component, sensors and LM parts selection.

· Minimum 2 year of working experience

· At least a Diploma or ITE in Mechanical/Mechantronic

Job Summary

We are looking for a talented AI Engineer to work with cutting-edge technologies in developing and deploying intelligent systems that drive innovation. You will design machine learning models, implement deep learning techniques, and solve complex problems across various domains, including automation and predictive analytics.

Mandatory Skill-set

• Bachelor’s degree in Computer Science, Information Technology, or a related field;
• Possesses 3 to 5 years of relevant experience;
• Have experience in leading the AI initiative projects;
• Drive the creation and execution of AI strategies and objectives TO aligned with company goals;
• Have strong knowledge in AI frameworks;
• Experience in the Financial Services/Payments industry;
• Have knowledge in DevOps practices and tools;
• Experience with infrastructure as code (IaC) tools;
• Excellent problem-solving skills and attention to detail;
• Strong communication and collaboration skills;
• Relevant certifications in AI technologies can be beneficial;
• Proficiency in Python, Java, and R;
• Strong knowledge of AI frameworks such as TensorFlow or PyTorch.

Desired Skill-set

• Strong experience in machine learning, deep learning, and NLP;
• Problem-solving mindset and a passion for innovation.
• Ability to lead and communicate ideas to the management and team members.

Responsibilities

• Design, deploy, and maintain machine learning models and algorithms from scratch;
• Implement AI solutions that integrate with existing business systems to enhance functionality and user interaction;
• Manage the data flow and infrastructure for effective AI deployment;
• Collaborate across teams to align AI initiatives with organizational goals;
• Monitor and optimize resources for performance, cost, and security;
• Manage the data flow and infrastructure required for effective AI deployment;
• Troubleshoot and resolve issues promptly;
• Develop and maintain documentation for ai solutions and processes;
• Developing, deploying and debugging IaC code for AI solutions;
• Ensure that AI solutions comply with company security policies and best practices in security;
• Stay updated with the latest AI technologies and best practices.

Should you be interested in this career opportunity, please send in your updated resume to [email protected] at the earliest.

When you apply, you voluntarily consent to the disclosure, collection and use of your personal data for employment/recruitment and related purposes in accordance with the SCIENTE Group Privacy Policy, a copy of which is published at SCIENTE's website (https://www.sciente.com/privacy-policy).

Confidentiality is assured, and only shortlisted candidates will be notified for interviews.

EA Licence No. 07C5639

Role & Responsibilities:

a) Report and assist Project Manager (PM) on project functions included but not limited to project management, site management, risk control management etc. to meet the project(s) goals.

b) Assist Project Manager in project planning, implementation and to coordinate all construction works on the project site are in accordance to the master and detailed work program.

c) Prepare, plan and submit project related documents, such as schedules, method statement, design plan, risk assessment, monthly report, etc.

d) To supervise the execution of the construction works and ensure that the works are carried out in accordance with contract specification/bills of quantities, construction drawings, company’s quality standards, Environmental, Safety & Health (ESH) practices and all other contract document.

e) To coordinate and liaise with Client’s representatives, relevant Authorities, Consultant, Subcontractors, Suppliers, etc. on all project aspects and need be, to provide all technical and non-technical resolutions followed by documentation.

f) Liaise with client or consultant for site inspections, submission of necessary technical reports and ensure necessary records are maintained at site. Assist Contract department (QS) in verifying progress payments and claims from Contractors.

g) Attend regular meetings with Client’s Representative, Consultants and/or Contractors and ensure the progress is on schedule

h) Establish proper and effective document control system, maintain & conduct reviews of detail design drawings, project documents and specifications.

i) Be responsible for any other duties that may be assigned from time to time as your superior/management deem fit.

Requirements

· Degree in Civil Engineering (Recognised by Singapore Professional Engineers Board (PEB)

· At least 5 years of working experience in the Construction Industry and Infrastructure

Job Description

• Best to have formal experience in pre-sales, post sales, delivery team
• Experience in overall design for network and security solutions.
• To prepare and deliver the business value solutions for customers, including proposal writing, presentation, conduct, proof-of-concept to showcase its technical feasibility when necessary.
• Propose technical solutions and oversee the selection of technologies and work with subject matter partners to develop the proposed solutions to meet customer’s requirements.
• Articulate alternatives in terms of cost, benefit and risk where multiple solutions exist.
• Actively participate in identifying opportunities, generate proposals, and support sales efforts.
• Increase organization effectiveness by identifying opportunities to leverage solutions to other engagements.
• Take ownership and responsibility for customers’ risks and issues.

Responsibilities:

• Same as Associate Consultant, but with more responsibility for troubleshooting and resolving technical issues across multiple teams.
• Take a lead role in managing security and access control measures for both test and production environments.
• Oversee and guide incident and change management workflows, ensuring SLA compliance.
• Develop preventive measures to minimize downtime and human error through process automation and monitoring improvements.
• Lead efforts to implement full-stack monitoring and identify areas for continuous improvement.
• Produce comprehensive reports on system performance, incident handling, and improvement efforts for stakeholders and senior management.
• Provide mentorship and guidance to junior team members and ensure they are aligned with the team’s objectives and best practices.

Experience and Skills Needed:

• Bachelor’s degree in Computer Science, Information Technology, or a related field.
• Proven experience in an Operations Engineer role, with at least 2 years of experience in the field.
• Experience with security and access control measures for test and production environments.
• Knowledge of cloud infrastructure management and services (AWS, Azure, Google Cloud).
• Hands-on experience with scripting tools (e.g., Terraform, Ansible) and familiarity with monitoring tools.
• Strong problem-solving abilities, able to approach issues creatively and resourcefully.
• Excellent communication skills and the ability to work in a collaborative environment.

The core responsibility of this role is to mainly perform monthly patching for RHEL and Windows servers within a dark site environment.

Core Responsibilities:

Monthly patching of RHEL and Windows servers within a dark site environment. (After office hours)

System health checks and issue resolution post-patching to ensure uptime and service continuity.

Review NVA (Network vulnerability assessment) scan reports and remediate issues as needed to maintain compliance and reduce system vulnerabilities.

Key Skills & Requirements:

Understanding of RHEL (Red Hat Enterprise Linux) and Windows Server environments.

Experience working in dark site environments (isolated, air-gapped networks).

Proficiency in system administration tasks, such as troubleshooting, log analysis, and system optimization.

Ability to read and interpret scan reports and implement remediation actions accordingly.

Ability to adhere to strict operational processes and security protocols.

2 - 3 years experience, keen attitude to learn and pick up skills

• Infrastructure setup, design, and performance should be planned, built, and optimized.
• Manage the backend information systems, such as the virtualization platform and virtual machines, network storage, backup, and fiber channel switches.
• Extensive knowledge of administering Linux. must be at the expert level
• Strong understanding of High Availability setup for Linux/Windows applications (etc. webs, database)
• Strong network fundamentals – IPv4/IPv6 – addressing, NAT, Routing
• Troubleshooting and maintenance of networks and systems
• Good to have disaster recovery planning and execution
• Private cloud administration experience is a must – VMWare / Hypervisor
• In-depth experience in DNS, DHCP, Proxies, Linux firewalls & network security is a must.
• Maintain and Administer Security Appliances of different projects
• Design and propose a plan that will improve the hosting service of the Data Center