Job Scope:

To design and develop Application Software//Embedded firmware for user interface equipment, and device control equipment as follows:-

· Designs and implements systems using a variety of languages (e.g. C, C++, C#, Java, Python, etc.);

· Designs enhancements, updates, and programming changes for subsystems, including embedded code;

· Writes and executes complete testing plans, protocols, and documentation;

· Identifies and debugs, and creates solutions for issues with code and integration into application architecture;

· Collaborates and communicates with management, internal, and outsourced development partners regarding firmware design status, project progress, and issue resolution; and

· Analyzes designs to determine coding, programming, and integration activities required based on general objectives and knowledge of overall architecture of product or solution.

Requirements:

1. Degree in Computer Science or Embedded System.

2. Proficiency and experience in C, C++, C#, Java, UML, Docker.

3. Good knowledge in application software programing for Linux and Windows.

4. Knowledge and experience with network programming and database programming.

5. Familiar with C#.Net full stack development.

6. Knowledge about containerized microservice solution.

7. Knowledge about aws/azure cloud architecture.

Job scope

- Carrying out Various noise monitoring and noise consultancy at workplace and construction site.

- To perform noise impact assessments (NIA), noise management plans (NMP), and workplace noise assessments.

- Carry out noise prediction by using company proprietary spreadsheets and SoundPLAN Acoustic Modeling Software

- Various noise measurements for vessel at dock site

- Measurement and analysis of whole body and hand arm vibration.

- Preparation of proposal, test methods, test plans and test report for clients.

Job Requirements

- Able to work independently with minimal guidance and supervision.

- Effective communication skill with customer.

- Technical knowledge in the field, especially as it relates to acoustic engineering.

-Support and report directly to Senior Acoustic Consultant

The duties and responsibilities of a mechanical engineer include

• Identifying deficiencies in mechanical processes and developing improvements
• Designing and developing prototypes
• Analyzing and testing prototypes and each revision of a device
• Designing, manufacturing, and installing components that fulfill requirements
• Analyzing problems or deficiencies and developing solutions to resolve them

Job Description:

• Developing PLC & HMI/ SCADA program based on customer specification
• Integration of third-party equipment and components into software design. Example: data communication, barcode scanner, motion control, transducer, vision system and etc...
• Liaise with In-house, Design and Project Engineer for the software development and execution of the project
• Documentation of operation manual for the project.
• Maintain proper project documentation.
• Manage and execute assigned projects within schedule

Job Requirements:

• Min. Diploma in Mechatronic/Robotics/Electronics/Automation Control or equivalent
• Min. 1 years relevant experience in Automation Control engineer or programmer
• New Grad without experience but have strong interest to develop a career in this field may also apply
• Self-motivated, creative thinking, strong analytical skills
• Able to perform assigned tasks independently or through team activities
• Experience with 2D/3D vision system will be an added advantage
• Knowledge of C, C++, C#, .NET, MVVM, WPF, Python is an added advantage
• Ability to understand mechanical and electrical drawings.
• Experienced in developing motion control programs or/and robot programs
• Experienced in HMI UI design, servo systems, motion control
• Experienced in PLC programming (Omron, Siemen, Mitsubishi, and Programming language Ladder, Structure Text and Function Block)

Job Scope

• Prepare schematic design, site installation layout, calculations, technical reports and specifications etc for automation equipment panel.
• Liaise with external consultant teams, contractors and suppliers to resolve project electrical design issues.
• Generate BOM and RFQ document.
• Communicate with contractor for automation equipment panel fabrication.
• Prepare factory acceptance test document for automation equipment panel.
• Responsible for liaising with Project Manager on automation equipment panel acceptance before ship to site.
• Provide support on site installation.
• Updating of Circuit diagram, Control device and Equipment Installation layout.

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

*We regret to inform that only shortlisted candidates would be notified*

We wish you all the best in your career search.

You are welcome to visit our website at http://www.rkgroup.sg/

RK Recruitment Pte Ltd | EA License No.: 20C0280

RAYMOND NG JUN HAN | EA Personnel No.: R1657009

• Provide necessary general engineering and technical support to various departments.
• Assist in creation of technical drawings, plans and diagrams using CAD software.
• Prepare lifting plans, engineering studies, method statements according to requirements of the lifting operations.
• Coordinate and correspond with the clients for their lifting requirements.

Micron Packaging R&D group is looking for highly talented individual for Wire Bond Process to develop innovative solutions for the Multi Chip Memory IC Packages.

Job Responsibilities

• Provide leadership in wire bond technology, problem analysis and resolution
• Develop and Transfer wire bond process for IC Package process technology (Wire Bond) for multichip memory packages
• Process Development & Characterization, Qualification, and production pilot run
• Work with multi-functional team to characterize new Silicon technode and develop assembly packaging/recipe solution for products requirements
• Define, plan and implement technology roadmap to meet wire bond packaging roadmaps
• Qualify and transfer packaging technology to production site
• Collaborate with other functional groups both locally and globally to develop wire bond solutions to meet the packaging business needs
• Showcase and build organization reputation by publishing technical papers and submit invention disclosures.

Job Requirements

• PhD/Masters’s Degree in Materials, Chemical, Mechanical, Electrical & Electronic Engineering
• At least 5 years of experience in semiconductor wire bond engineering
• Good analytical and problem-solving skills, such as using Design Of Experiment and structured problem solving tools
• Self-motivated, able to work independently and self-initiative personality
• Possesses good communication skills, interpersonal skills and ability to work with global multi-functional teams

Keen on the role? Apply with us now!

Performs hardware, software, semiconductor design or telecomm engineering assignments. This job mapping should be used only if the position cannot be mapped specifically to other design/development engineering jobs.

Job Description:

DxD Hub is seeking an experienced UI/UX engineer for our product development for our Digital Diagnostics Team. In this role, you will play a crucial role in driving the user interface and experience of digital health products in collaboration with external partners (especially clinicians). The ideal candidate should possess a strong usability engineering skills and able to translate expectation to visualisation and handover to technical team.

Job Responsibilities:

• Design innovative app experiences based on the understanding of personas, their behaviors and needs as well as competitive market insights.
• Collaborate with partners to understand their goals and propose a user-centric approach to improve digital services.
• Communicate design ideas through tools such as sketches, user journeys, storyboards, mind maps, wireframes, and clickable prototypes.
• Drive user research activities such as, usability testing, user interviews, surveys, and translate research findings into meaningful recommendations.
• Guide all aspects of UX including design research, design strategy, user experience, usability testing, interaction/content design and prototyping.
• Work closely with Product Owners to ensure all design work meets user needs and business requirements.
• Create a design-minded environment and build design capabilities amongst project team members.

Job Requirements:

• Degree or Diploma in Human Computer Interactions, Design, Psychology, Computer Science or related fields
• 1-2 years’ experience in user-centered design with hands on experience building visual identities for web and mobile app UI.
• Experience in delivering wireframes, UX flows, mockups, interactive prototypes, design specifications, and final assets.
• Experience with design/wireframing software such as: Figma, Sketch, Adobe suite, or equivalent.
• Strong portfolio showcasing your best design work for web and mobile.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Responsibilities:

• To lead and drive the requirements gathering process.
• To lead and manage a small team of developers to deliver the modules to develop web-based application systems.
• Participate in the design and development of web applications based on Ecquaria’s product (J2EE-based).
• Lead and manage the user acceptance testing process.
• Implement, customize, test, document and maintain software applications.
• Ensure that the modules delivered are according to the specifications and are of high quality.

Requirements:

• A Degree/Diploma in Computer Science with at least 3 years' software development experience in Internet technology in Win NT, UNIX or LINUX platform
• Those with leadership experience may be considered for the Project Lead position.
• Technical skills include proven object-oriented programming experience with Java and C++ together with extensive RDBMS through JDBC
• Experience in J2EE, Web Services and XML will be advantageous
• Experience in Elixir reporting solutions will be advantageous
• Very strong in SQL
• Data analysis skill will be an added advantage, although this is not compulsory to have.
• Good interpersonal skills

Toppan Ecquaria is an equal opportunity employer and values diversity within our company. We welcome all interested candidates to apply for this position, however, we regret to inform that only shortlisted candidates will be contacted by us for an interview.

Find us at www.topppanecquaria.com or www.linkedin.com/company/toppan-ecquaria

For more career opportunities, please visit our career site at:- https://toppanecquaria.com/careers/job-openings?utm_source=Jobstreet&utm_medium=Page&utm_campaign=2020

(Please copy & paste the above link onto your browser)

As a University of Applied Learning, SIT works closely with industry in our research pursuits. Our research staff will have the opportunity to be equipped with applied research skill sets that are relevant to industry demands while working on research projects in SIT.

The primary responsibility of this role is to advance an industry-focused research project by developing and optimizing an LLM-based chatbot specifically designed for the hotel industry, delivering innovative solutions for guest interaction and data handling to meet industry standards and drive the organization’s technological edge.

Key Responsibilities:

1. LLM Chatbot Development and Optimization

• Design, develop, and maintain an advanced LLM-based chatbot utilizing a multi-agent approach, specifically tailored to the unique needs of the hotel industry.
• Implement solutions for effective data handling, conversation history tracking, and response adaptation to enhance the chatbot’s relevance, accuracy, and safety in real-time interactions.

2. Technical Support and Integration Assistance

• Provide hands-on technical support to collaborating partners, ensuring seamless integration of the chatbot into existing hotel systems.
• Respond to partner feedback by troubleshooting and implementing updates to continually improve chatbot functionality and user experience.

3. Collaboration on Innovative Research and Development

• Work closely with students on LLM-related projects, focusing on the design of novel chatbot solutions that prioritize data security and sensitive information handling within the hotel industry.
• Contribute to developing new methodologies that enhance chatbot capabilities while addressing industry challenges in privacy and data protection.

4. Project Coordination and Reporting

• Work under the guidance of the Principal Investigator (PI) to ensure project milestones are met, maintaining clear and regular communication on progress, challenges, and future needs.
• Document development processes, maintain records of project achievements, and prepare reports as needed to support project goals and stakeholder updates.

Job Requirements:

1. Education and Knowledge

• Bachelor’s or Master’s degree in Computer Science, Artificial Intelligence, Data Science, or a related field.
• Strong knowledge experience with Large Language Models (LLMs), preferably applied in a business or industry context.
• Familiarity with multi-agent systems, chatbot frameworks, and machine learning techniques.
• Demonstrated experience in collaborative research or development projects.

2. Technical Skills

• Proficiency in programming languages such as Python, and experience with LLM-related libraries and tools (e.g., Hugging Face, PyTorch, TensorFlow).
• Experience with chatbot development, deployment, and optimization, including integration with partner systems.
• Knowledge of conversational AI best practices, including techniques for maintaining conversation history, data handling, and adaptive response mechanisms.

3. Personal Qualities

• A passion for innovation and a strong desire to create and refine new technologies, particularly in AI-driven solutions for real-world applications.
• Ability to think creatively and proactively solve complex problems while maintaining a high attention to detail.

Key Competencies:

1. Innovative Thinking and Problem Solving

• Ability to approach complex challenges with creative solutions, particularly in applying LLM technology to new and specialized industry applications.

2. Collaboration and Communication

• Strong interpersonal and communication skills to effectively collaborate with technical and non-technical stakeholders, including partners, students, and team members.
• Capability to translate technical concepts for diverse audiences and incorporate feedback into ongoing development.

3. Technical Proficiency

• Skilled in deploying, fine-tuning, and troubleshooting chatbot systems, with a focus on ensuring functionality, accuracy, and user satisfaction.
• Ability to adapt and scale solutions to address evolving requirements and maintain best practices in data handling and security.

4. Adaptability and Continuous Learning

• Openness to learning new tools and technologies in the rapidly evolving field of LLMs and AI.
• Ability to stay updated on industry trends and integrate relevant advancements into project work.

5. Passion for Innovation

• Strong enthusiasm for creating new, impactful solutions and contributing to advancements in conversational AI for the hotel industry.

Major Challenges:

1. Balancing Innovation with Practicality

• Designing a cutting-edge LLM chatbot that meets high industry standards for innovation, while ensuring that it remains functional, efficient, and practical for real-world use in the hotel industry.

2. Data Privacy and Security

• Ensuring compliance with strict data privacy regulations and implementing robust security measures to protect sensitive customer information, especially given the hospitality sector’s unique data handling needs.

3. Technical Integration with Partner Systems

• Addressing compatibility and integration challenges when embedding the chatbot into diverse hotel management systems and workflows, requiring close coordination and technical support.

4. Adapting to Evolving Industry Needs

• Continuously refining the chatbot to align with changing requirements, including adapting to feedback from partners and staying responsive to emerging trends and user expectations in the hospitality industry.

5. Maintaining High-Quality User Interaction

• Balancing response accuracy and relevance while preserving a conversational, user-friendly experience, which is especially challenging in complex, multi-turn conversations.

6. Resource and Time Constraints

• Achieving project milestones within the one-year contract period, while managing the technical complexities and scope of multi-agent LLM development under limited resources.

Job Description:

DxD Hub is seeking an experienced UI/UX engineer for our product development for our Digital Diagnostics Team. In this role, you will play a crucial role in driving the user interface and experience of digital health products in collaboration with external partners (especially clinicians). The ideal candidate should possess a strong usability engineering skills and able to translate expectation to visualisation and handover to technical team.

Job Responsibilities:

• Design innovative app experiences based on the understanding of personas, their behaviors and needs as well as competitive market insights.
• Collaborate with partners to understand their goals and propose a user-centric approach to improve digital services.
• Communicate design ideas through tools such as sketches, user journeys, storyboards, mind maps, wireframes, and clickable prototypes.
• Drive user research activities such as, usability testing, user interviews, surveys, and translate research findings into meaningful recommendations.
• Guide all aspects of UX including design research, design strategy, user experience, usability testing, interaction/content design and prototyping.
• Work closely with Product Owners to ensure all design work meets user needs and business requirements.
• Create a design-minded environment and build design capabilities amongst project team members.

Job Requirements:

• Degree or Diploma in Human Computer Interactions, Design, Psychology, Computer Science or related fields
• 5 years’ experience in user-centered design with hands on experience building visual identities for web and mobile app UI.
• Experience in delivering wireframes, UX flows, mockups, interactive prototypes, design specifications, and final assets.
• Experience with design/wireframing software such as: Figma, Sketch, Adobe suite, or equivalent.
• Strong portfolio showcasing your best design work for web and mobile.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Responsibilities:

• Collaborate with the presales team to conduct site surveys and assessments. This involves evaluating the customer's location, infrastructure, and specific requirements to determine the ideal setup and deployment for the robot.
• Responsible for setting up, commissioning the robot on-site and ensuring the robot is ready for operation.
• Perform thorough testing, identify and troubleshoot errors/failures and implement appropriate solutions to resolve the issues promptly.
• Handle repairs and maintenance tasks for the robot. This involves conducting regular maintenance activities as per the SOP/guidelines and addressing any breakdowns or equipment failures.
• Travel to customer sites, both local and international (whenever necessary), to provide on-site support, conduct setup/commissioning, perform maintenance tasks, and resolve technical issues at short notice to provide support or address urgent issues. Additionally, you should be willing to adapt to the customer's work environment and schedule, which may include night shifts and public holidays when necessary.
• Responsible for documenting service and fault reports. This includes accurately recording the details of the service provided, issues encountered, and the actions taken to resolve them. These reports are typically submitted to superiors and key individuals within the organization for review and analysis.
• Maintain detailed records of all tasks related to customer service. This includes maintaining customer service logs, updating internal service records, and ensuring all documentation is completed in a timely manner.
• Train customers and end-users on the proper handling, maintenance, and safety procedures of robot operation. Create and update documentation, including user manuals and service guides, to facilitate knowledge transfer and enhance support processes.

Requirements:

• Minimum Diploma in Engineering or other related fields
• 2 years of experience in servicing electronic and mechanical equipment / machines.
• Experience with troubleshooting and debugging hardware, electronics, and software.
• Excellent problem-solving skills and the ability to work under pressure in fast-paced environments.
• Effective communication skills with the ability to explain complex technical concepts to both technical and non-technical stakeholders.
• Strong communication skills in English (both oral and written)
• Tools: Basic knowledge on handling mechanical, electrical and electronic tools.
• Able to perform simple network configuration.
• Able to work independently and as part of a harmonious and effective team.
• Able to communicate well and tactfully with customers/distributors.

About your role

• Serve as the technical expert and trusted advisor to manufacturing customers around automation solutions.
• By applying subject matter expertise, you build and maintain client relationships and solve their complex automation challenges.
• Collaborate with sales and technical team members to help identify, progress, and close commercial opportunities.
• Develop sales processes and build relationships with stakeholders to design and offer solution that solve customer pain points.
• Attractive commissions will be awarded.
  

Requirements

• Experience in robotic engineering and simulation work is preferred.
• Strong understanding of robotics and automation related products.
• High willingness to learn and take ownership.
• Ability to effectively communicate product value propositions, negotiate commercial contracts, and close deals.
• Comfortable with travelling internationally for work.
• Ability to take initiative and self-manage to achieve key objectives and company KPIs.

Job Description:

• Responsible for the execution of the Static Equipment Integrity Coordination scope of work, focusing in the Integrity Management Process of the equipment controlled by the MODEC's Own Service of Equipment Inspection,predictive maintenance, process performance and condition monitoring, quality assurance and quality control of subcontractors, and development and improvement of preventive and predictive maintenance plans, in order to ensure and maximize assets reliability, availability, maintainability, safety and integrity (RAMSI), as well as contributing to the Operations procedures and results achievement, established for the business.
• Support the MdB's corporate annual budget planning (expenses and investments), by providing information based on previous experiences, technical knowledge, and best practices of the market.
• Contribute to continuous improvement of IMS by following up and filling in projects status and updating and monitoring the implementation of IMS Documents under Static Equipment Integrity Coordination and maintaining the equipment master list updated.
• Participate in risk analysis workshops and safety reviews to contribute with Integrity engineering expertise and support the Operations team.
• Contribute to the attendance to the maintenance and equipment inspection policies, regarding to the Reliability Engineering, by applying the guidelines and lessons learned from the Technical management.
• Monitor process safety barriers' KPIs and provide technical recommendation, when necessary, to ensure the
• effectiveness of process safety barriers to maintain the facility's operation within ALARP level. Furthermore, it is extremely important to ensure the verification of the safety devices as safety valves, rupture discs, flare, etc., based on written procedures, in order to ensure safe condition for operation of equipment.
• Elaborate technical recommendations or actions plans to meet the Operations needs and feedbacks of the Technical management, Fleet maintenance support, subcontractors, and Operations areas.
• Contribute to effective planning and monitoring of shutdown and decommissioning (equipment and offshore unit) plans by defining the shutdown scope (equipment list, NDT exam, tests, measurements, replacements, repairs, or modifications to be carried out) related to controlled equipment, through legal compliance and integrity evaluation.
• Organize the activities related to NR 13 / SPIE together with the Equipment Inspectors from the Offshore Units, by including files and documentation, such as official books, calibration certificates, internal and external inspections, inspection reports, hydro-test and carrying out audit in the manufacturers.
• Ensure the proper register of all Pressure Vessels, PSV, Boilers and all others static equipment by developing datasheets and inspections reports and filling in the integrity management software (SGI) with reliable and updated data on this equipment.
• Contribute to fleet performance improvement by constantly cooperating with other Tiers and Modec entities, to absorb and apply all lessons learnt from other Unit Phases (Commissioning, Operation, Maintenance, Decommissioning) for the new vessels in construction, as well as provide new lessons learnt and improvement opportunities discovered during the Pre-Ops project.
• Sporadic follow ups in the shipyard during the Construction Phase and visits to vendors' factories might be required for these activities.

Qualifications & Experience:

• Bachelor's degree of Mechanical or Naval Engineering is required for SPIE.
• CREA is required. Certification as Welding Inspector (SNQC) IS-N2 is a competitive edge.
• Engineer JR: 2 years of overall experience is expected. Previous experience in Offshore/Onshore Oil & Gas area is a competitive edge. Previous experience in integrity management, implementation / maintenance of SPIE and ISO certificates, and failures analysis is a competitive edge. Previous experience as part of a SPIE technical group is a competitive edge.
• Engineer Full: minimum 4 years of overall experience is expected. Previous experience in Offshore/Onshore Oil & Gas area is a competitive edge. Previous experience in integrity management, implementation / maintenance of SPIE and ISO certificates, and failures analysis is a competitive edge. Previous experience as part of a SPIE technical group is a competitive edge.

Job Scope

• Prepare schematic design, site installation layout, calculations, technical reports and specifications etc for automation equipment panel.
• Liaise with external consultant teams, contractors and suppliers to resolve project electrical design issues.
• Generate BOM and RFQ document.
• Communicate with contractor for automation equipment panel fabrication.
• Prepare factory acceptance test document for automation equipment panel.
• Responsible for liaising with Project Manager on automation equipment panel acceptance before ship to site.
• Provide support on site installation.
• Updating of Circuit diagram, Control device and Equipment Installation layout.

Please submit your updated resume by using the APPLY NOW BUTTON

By submitting your personal data and/or resume to us in connection with your job application, you will be deemed to have agreed and consented to us in collecting, using, retaining, and disclosing your personal data and/or resume to prospective employers for the purpose of the evaluating, processing and administration by company relating to this job application.

*We regret to inform that only shortlisted candidates would be notified*

We wish you all the best in your career search.

You are welcome to visit our website at http://www.rkgroup.sg/

RK Recruitment Pte Ltd | EA License No.: 20C0280

RAYMOND NG JUN HAN | EA Personnel No.: R1657009

Datacenter Operations Engineer

The Leaseweb APAC team is growing quickly and looking for talented individuals to join us. Our Data center Operations Team is involved in the daily management of our current 6 data center facilities in the APAC region (Singapore, Japan, Hong Kong and Australia) and we are about to open 3 more data center location in Singapore, Japan and Australia later this year. You will be responsible for the configuration and installation of the servers during the provisioning process in our data center in Singapore, and other data centers in the region as needed. You will also be assisting customers with the installation of network equipment in more complex designs.

Key responsibilities:

• Installation, configuration, relocation, and removal of server equipment at the data center
• The assistance of customers within data centers (for customers with their own racks/servers)
• Upgrade/downgrade of server equipment (memory/hard disks/etc.)
• Replacement of hardware and handling of all relevant administrative matters.
• Testing servers and server equipment in accordance with standards
• Work with remote hands partners within the APAC region to support installation and/or adjustment of servers.

Requirements:

• At least one year of hands-on experience working in a data center with servers
• Knowledge of various operating systems, especially Linux
• Knowledge of Hardware (Servers, Switches, KVM, Hard Drives, Memory etc.)
• Basic network knowledge (adjusting DNS/IP/Netmask/gateway/etc.)
• Certificate or degree in Computer Science or similar discipline preferably with an emphasis in Technology
• Professional and effective communication in English

What we offer:

• Competitive salary
• The possibility to develop yourself and build your career
• Comprehensive Health Insurance
• A great working environment in a dynamic, international, fast-growing organization

Ready for the next step?

If you’d like to apply, please do so online. To learn more about us, follow us on LinkedIn or Instagram to get an inside look at the life at Leaseweb. For questions, please reach out to Danisha Ardilla - Talent Acquisition Specialist, at: [email protected]

Recruitment agency? Thank you for your interest, but we are sourcing all our candidates directly. We appreciate you trying anyway but please keep in mind that any unsolicited profiles you send us will be treated as direct applications.

Who we are

Crédit Agricole Corporate and Investment Banking (Crédit Agricole CIB) is the corporate and investment banking arm of Crédit Agricole Group, world’s 10th largest bank by total assets.

Our Singapore center (“ISAP” or “Information Systems Asia Pacific”) is the 2nd largest IT setup (after Paris Head Office) for Crédit Agricole CIB's worldwide business. We work daily with international branches located in 30 markets by:

• Envisioning and preparing the Bank’s futures information systems
• Partnering and supporting core banking flagships and transverse areas in their large scale development projects
• Providing premium In-house Banking applications

This unique positioning empowers us to bring our core banking business a sustainable competitive advantage on the market.

We seek innovative and agile people sharing our mindset to support ambitious and forthcoming technological challenges.

The Mission statement

Project name: Compliance Applications health check Monitoring

Context of the project: In Compliance, all the health checks of applications are managed manually. Connection to the GUI, Access to data and Check they are properly displayed on the application. For each intervention during the WE and for each delivery, we need support people to perform the manual checks on applications.

Goal of the project: Creation of a monitoring portal which centralized the status of the different applications. Status, Alerts and Warnings will be displayed for each application for Support team to be able to follow on real time the health of applications and address issues as soon as they appeared. This one will guarantee a better efficiency of Support team.

Internship mission statement: This internship will allow the intern to work on the monitoring tool to be able to retrieve the status of applications and centralized the follow-up on one IU. The tool development will have to follow the full CI-CD pipeline (unit tests, Sonar check, …) process. Technology will be DotNet, Angular, Python and scripting.

The benefit for Compliance domain will be a better reactivity of the team in term of issues management and a reduction of the impact on users’ day to day work.

The Role

• Get to experience what it is like to work in a team and how they collaborate on a project.
• Attend team meetings to get a better sense of the project and understand team dynamics
• Responsible of user stories development
• Explore different frameworks, by being a part of the development of a UI from a web application
• Contribute on both front and backend technologies

Responsibilities

• Full Stack developer responsible for development of both front and back end using modern techniques and frameworks
• Get experience in microservices architecture
• Experience in containerization with Docker and Kubernetes
• Automated test implementation with Cypress

Qualifications and Profile

Good for candidates to have

• Understanding of Object Oriented analysis and design using common design patterns.
• Experience in back-end development using: NET, .NET Core, C#
• Basic understanding of the Spring Framework, Microservices architecture and API.
• Excellent Aptitude, Curious to learn and inquisitive.
• Excellent communication and interpersonal skills.
• Autonomous, self motivated and excellent team player.
• Fluency in English - as acting in a multi-cultural environment.

Functional

• Basic understanding of general banking, finance and investment banking.

Other Professional Skills and Mind-set

• Strong organizational and communication skills
• Strong sense of ownership and drive with customer focus
• Strong ability to analyze and summarize
• Strong interpersonal skills
• Skilled in providing oversight and mentoring team members

Education & Work Experience:

• Pursuing or Completed Master’s/Bachelor’s program.
• Master’s/Bachelor’s degree in Computers Science/IT or equivalent domain.

Please apply via below link:

https://app.jobvite.com/j?cj=os2Nufwv&s=URL

Who we are

Crédit Agricole Corporate and Investment Banking (Crédit Agricole CIB) is the corporate and investment banking arm of Crédit Agricole Group, world’s 10th largest bank by total assets.

Our Singapore center (“ISAP” or “Information Systems Asia Pacific”) is the 2nd largest IT setup (after Paris Head Office) for Crédit Agricole CIB's worldwide business. We work daily with international branches located in 30 markets by:

• Envisioning and preparing the Bank’s futures information systems
• Partnering and supporting core banking flagships and transverse areas in their large scale development projects
• Providing premium In-house Banking applications

This unique positioning empowers us to bring our core banking business a sustainable competitive advantage on the market.

We seek innovative and agile people sharing our mindset to support ambitious and forthcoming technological challenges.

The Mission Statement

Project name: Migrate SSIS components to Java spring batch

Context of the project: In Know Your Customer process, users sometimes need to load data in mass without going through a standard workflow in the application. To do that, they have a set of existing loaders, used to parse input file, perform some controls and load data in the application if the data provided fulfills proper criteria.

Goal of the project: Migrate loaders currently implemented in Microsoft SSIS technology, to a brand new Java spring batch. Reinforce the reliability of those loaders. Reinforce the code maintainability, add unit testing coverage and add in Sonar perimeter.

Internship mission statement: This internship will allow the intern to work on a real-case migration project to remove an obsolete technology and use state of the art technology instead. Java spring batch will be hosted in Kubernates container and will follow the full CI-CD pipeline (unit tests, Sonar check, …).

The benefit for the organization will be multiple, with an increase maintainability, reliability and performance of all loaders used by users.

The Role

• Get to experience what it is like to work in a team and how they collaborate on a project.
• Attend team meetings to get a better sense of the project and understand tem dynamics
• Responsible of a user story development
• Explore different frameworks, by being a part of the development of a UI from a web application
• Contribute on both front and backend technologies

Responsibilities

• Full Stack developer responsible for development of both front and back end using modern techniques and frameworks
• Get experience in microservices architecture
• Experience in containerization with Docker and Kubernetes
• Automated test implementation with Cypress

Qualifications and Profile

Good for candidates to have

• Understanding of Object Oriented analysis and design using common design patterns.
• Java, SQL, and code quality skills.
• Basic understanding of the Spring Framework, Microservices architecture and API.
• Excellent Aptitude, Curious to learn and inquisitive.
• Excellent communication and interpersonal skills.
• Autonomous, self motivated and excellent team player.
• Fluency in English - as acting in a multi-cultural environment.

Functional

• Basic understanding of general banking, finance and investment banking.

Other Professional Skills and Mind-set

• Strong organizational and communication skills
• Strong sense of ownership and drive with customer focus
• Strong ability to analyze and summarize
• Strong interpersonal skills
• Skilled in providing oversight and mentoring team members

Education & Work Experience:

• Pursuing or Completed Master’s/Bachelor’s program.
• Master’s/Bachelor’s degree in Computers Science/IT or equivalent domain.

Job Responsibilities:

• Design and develop high-quality, scalable, and maintainable mobile applications.
• Collaborate with cross-functional teams to define, design, and ship new features.
• Ensure the performance, quality, and responsiveness of applications.
• Identify and correct bottlenecks and fix bugs.
• Help maintain code quality, organization, and automatization.
• Stay up-to-date with the latest trends and technologies in mobile development.

Requirements:

• At least a minimum of 5 years of relevant experience in IOS/Android App development.
• Bachelors degree in Computer Science, Information Technology, or a related field.
• Strong knowledge of Flutter, React, Dart and native programming language.
• Proven experience in building mobile applications for Android and iOS.
• Understanding of the full mobile development life cycle.
• Familiarity with RESTful APIs to connect mobile applications to back-end services.
• Strong understanding of design principles and user interface guidelines.
• Excellent problem-solving skills and ability to work in a team environment.
• Good communication and interpersonal skills.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Who we are

Crédit Agricole Corporate and Investment Banking (Crédit Agricole CIB) is the corporate and investment banking arm of Crédit Agricole Group, world’s 10th largest bank by total assets.

Our Singapore center (“ISAP” or “Information Systems Asia Pacific”) is the 2nd largest IT setup (after Paris Head Office) for Crédit Agricole CIB's worldwide business. We work daily with international branches located in 30 markets by:

• Envisioning and preparing the Bank’s futures information systems
• Partnering and supporting core banking flagships and transverse areas in their large scale development projects
• Providing premium In-house Banking applications

This unique positioning empowers us to bring our core banking business a sustainable competitive advantage on the market.

We seek innovative and agile people sharing our mindset to support ambitious and forthcoming technological challenges.

The Mission statement

Project name : CREdit Workflow (CREW)

Context of the project: A new application is developed in Counterparty and Credit Risk IT (RIT): CREW. This tool handles workflow and definition of credit granting concerning the counterparty risk. It includes a decision-making workflow and the process of the credit decision through authorizations.

Goal of the project :Leveraging on the testing automation framework created to develop complex scenarios for a workflow application and strengthen the non-regression testing.

Internship mission statement: This mission will allow the intern to work on the automation of business’ use cases of front office users to ensure the stability of the tool throughout the development cycle, in close collaboration with the solution developers and business analysts. The tool development will have to follow the full CI-CD pipeline (unit tests, Sonar check …) process. Playwright, which is an increasingly adopted automation solution in the industry, requires basic understanding of programming languages (e.g., Python, Java, or JavaScript) and object-oriented concepts.

The benefit for the domain will be a robust CI/CD with a strong quality gate alerting on regression and reducing the validation phases.

The Role

• Get to experience what it is like to work in a team and how they collaborate on a project.
• Attend team meetings to get a better sense of the project and understand team dynamics
• Responsible of user stories development
• Explore different frameworks, by being a part of the development of a UI from a web application
• Contribute on both front and backend technologies

Responsibilities

• Full Stack developer responsible for development of both front and back end using modern techniques and frameworks
• Get experience in microservices architecture
• Experience in containerization with Docker and Kubernetes
• Automated test implementation with Cypress

Qualifications and Profile

Good for candidates to have

• Understanding of Object Oriented analysis and design using common design patterns.
• Experience in back-end development using: NET, .NET Core, C#
• Basic understanding of the Spring Framework, Microservices architecture and API.
• Excellent Aptitude, Curious to learn and inquisitive.
• Excellent communication and interpersonal skills.
• Autonomous, self motivated and excellent team player.
• Fluency in English - as acting in a multi-cultural environment.

Functional

• Basic understanding of general banking, finance and investment banking.

Other Professional Skills and Mind-set

• Strong organizational and communication skills
• Strong sense of ownership and drive with customer focus
• Strong ability to analyze and summarize
• Strong interpersonal skills
• Skilled in providing oversight and mentoring team members

Education & Work Experience:

• Pursuing or Completed Master’s/Bachelor’s program.
• Master’s/Bachelor’s degree in Computers Science/IT or equivalent domain.

Please apply via link:

https://app.jobvite.com/j?cj=oq2Nufwt&s=URL

Job Responsibilities:

• Design and develop high-quality, scalable, and maintainable mobile applications.
• Collaborate with cross-functional teams to define, design, and ship new features.
• Ensure the performance, quality, and responsiveness of applications.
• Identify and correct bottlenecks and fix bugs.
• Help maintain code quality, organization, and automatization.
• Stay up-to-date with the latest trends and technologies in mobile development.

Requirements:

• 1-2 years of experience in IOS/Android App development.
• Bachelors degree in Computer Science, Information Technology, or a related field.
• Strong knowledge of Flutter, React, Dart and native programming language.
• Proven experience in building mobile applications for Android and iOS.
• Understanding of the full mobile development life cycle.
• Familiarity with RESTful APIs to connect mobile applications to back-end services.
• Strong understanding of design principles and user interface guidelines.
• Excellent problem-solving skills and ability to work in a team environment.
• Good communication and interpersonal skills.

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

Salary - ($4,000 - $6,000) + transport allowance

Mon - Fri, 8am - 5:15pm

Job Description:

● Develop new business opportunities & sales leads for revenue growth and customer retention.

● Achieve sales targets and analyst current market trends and industry information.

● Pitch, recommend and fulfil the requirement of customer in terms of products and services offered

● Work closely with the production, application and shipping team to ensure timely delivery and that all order requirements are met.

● Attend problem and generate solution.

Job Requirements:

● Minimum Diploma in Mechanical Engineering or equivalent.

● Strong drive and initiative with ability to work independently

● With relevant sales experience in Precision Engineering related Products.

● Proven sales and customer care track record.

● Strong technical knowledge in CNC machining and CMM basic inspection.

● Able to communicate in both English and Mandarin to liaise with Mandarin speaking to clients

● Good presentation and communication skill.

● Possess own car

● Singaporeans only

Daniel Wilson | Reg No.: R24125247

Recruit Now Singapore Pte Ltd | EA Licence No.: 21C0845

Who we are

Crédit Agricole Corporate and Investment Banking (Crédit Agricole CIB) is the corporate and investment banking arm of Crédit Agricole Group, world’s 10th largest bank by total assets.

Our Singapore center (“ISAP” or “Information Systems Asia Pacific”) is the 2nd largest IT setup (after Paris Head Office) for Crédit Agricole CIB's worldwide business. We work daily with international branches located in 30 markets by:

• Envisioning and preparing the Bank’s futures information systems
• Partnering and supporting core banking flagships and transverse areas in their large scale development projects
• Providing premium In-house Banking applications

This unique positioning empowers us to bring our core banking business a sustainable competitive advantage on the market.

We seek innovative and agile people sharing our mindset to support ambitious and forthcoming technological challenges.

The Role

• Get to experience what it is like to work in a team and how they collaborate on a project.
• Attend team meetings to get a better sense of the project and understand team dynamics
• Responsible of a user story development
• Explore different frameworks, by being a part of the development of a UI from a web application
• Contribute on both front and backend technologies

Responsibilities

• Full Stack developer responsible for development of both front and back end using modern techniques and frameworks
• Get experience in microservices architecture
• Experience in containerization with Docker and Kubernetes
• Automated test implementation with Cypress

Qualifications and Profile

Good for candidates to have

• Understanding of Object Oriented analysis and design using common design patterns.
• Java, SQL, and code quality skills.
• Basic understanding of the Spring Framework, Microservices architecture and API.
• Excellent Aptitude, Curious to learn and inquisitive.
• Excellent communication and interpersonal skills.
• Autonomous, self motivated and excellent team player.
• Fluency in English - as acting in a multi-cultural environment.

Functional

• Basic understanding of general banking, finance and investment banking.

Other Professional Skills and Mind-set

• Strong organizational and communication skills
• Strong sense of ownership and drive with customer focus
• Strong ability to analyze and summarize
• Strong interpersonal skills
• Skilled in providing oversight and mentoring team members

Education & Work Experience:

• Pursuing or Completed Master’s/Bachelor’s program.
• Master’s/Bachelor’s degree in Computers Science/IT or equivalent domain.

Pleaes apply via link:

https://app.jobvite.com/j?cj=otFNufw9&s=URL

Salary -

CNC Experience - ($4,000 - $4,500) + transport allowance

No Experience - ($3,800 - $4,000) + transport allowance

Mon - Fri, 8am - 5:15pm

Job Description:

● To repair & service CNC machines in the region

● To implement service programmes for customer service

● Machine Installation

● Documentation (Service report, Machine registration, filing and record)

Job Requirements:

● Minimum Diploma in Electrical / Mechanical / Mechatronics Engineering

● Possess valid Class 3 driving license

● Minimum 2 years experience in servicing CNC Turning or/and Milling Machines

● Singaporeans only

Daniel Wilson | Reg No.: R24125247

Recruit Now Singapore Pte Ltd | EA Licence No.: 21C0845

As a 3D Graphics Engineer Intern, you will be developing graphics components and applications for our products. In this role, you will work closely with UI-UX designers and the R&D team to collaboratively solve real-world problems.

What will you do

• Design, build and maintain efficient and reliable software modules for Screening Eagle software products.
• Develop tools for real-time interactive 3D graphics applications.
• Analyse & optimise 3D rendering pipelines.
• Assist other team members to implement next generation NDT solutions.
• Collaborate with team members to integrate the components to mobile and web platforms end products.

What do we expect

• Pursuing BA/MA/MS/PhD degree in Computer Science, Computer Graphics, or strong experience in 3D Games/CV/Robotics.
• Proficiency in C++11 and above, or comparable languages.
• Good understanding of software design patterns.
• Good knowledge of data structures and algorithms for OOP.
• Good understanding of memory management in non-garbage collected environments.
• Familiar with memory and CPU usage optimization.
• Familiar with 3D graphics pipelines and optimization techniques.
• Familiar with OpenGL / Vulkan / Metal.
• Solid linear algebra knowledge.
• Experience in developing for and integrating third party software on mobile and web tech stacks.
• Familiar with uitilizing machine learning algorithms for vision problems.
• Understanding of 2D/3D graphics pipeline and GPU programming.
• Experience with Windows, Linux platform, MacOS and iOS.