Responsibilities

• Responsible for providing technical support to the plating department laboratory and engineering and manufacturing activities
• Responsible in resolving all chemical related issues.

Requirements

• Min Diploma in Chemistry or Chemical Engineering
• Min 3 years of working experience in laboratory in chemical industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

• Identify requirements and features for semiconductor equipment and create concepts and architecture of new equipment.
• Design mechanical systems which involve the selection and use of motors, actuators, gear drives, pumps, and valves.
• Responsible for design verification and validation testing to ensure compliance with specifications, safety regulations and product requirements.
• Create a detailed Mechanical drawing and apply analysis tools like Fish Bone Diagram and FMEA.

Requirements:

• Degree in Mechanical Engineering or equivalent
• At least 5 years of experience in Semiconductor Equipment Design.
• Familiar with 3D CAD software.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701
Registration: R21100996

Responsibilities

• Perform troubleshooting and repair of equipment related failure to minimize downtime
• Schedule and perform periodic equipment preventive maintenance
• Work with Engineers to troubleshoot process related issues relating to equipment failure
• Perform housekeeping and conformance to safety and cleanroom protocols

Requirements

• Diploma / Higher Nitec / Nitec in Engineering
• Able to perform 12 hours rotating day and night shift

Working Hours

• 12 Hour rotational Shift (Shift allowances provided)
• 8.00 am to 8.00 pm / 8.00 pm to 8.00 am

If you are interested in the position, kindly send your CVs to sean.ho(@)randstad.com.sg

Please include your availability, expected salary and reason for leaving your current job.

We regret that only shortlisted candidates will be contacted.

Applicants must be fully vaccinated or have a valid exemption in accordance with MOM’s regulations to allow them to enter the workplace. Applicants may be required to share verifiable COVID-19 vaccination documents or proof of a valid exemption at the point of offer. Randstad Pte. Limited and/or the Client reserves the right to withdraw an offer if the applicant fails to provide verifiable COVID-19 vaccination and/or proof of exemption documents.

Rapsodo is a sports technology and analytics company with headquarters in Singapore, and offices in the USA, Turkey and Japan. Using Computer Vision and Machine Learning, Rapsodo develops sports analytics products that are data-driven and portable to empower athletes at all skill levels to analyse and improve their performance.

From Major League Baseball star pitchers to Golf tour players, athletes use Rapsodo technology to up their game across the world. Trusted by coaches and players from youths to professionals, Rapsodo provides real-time insights for all-time performance.

Powered by Athletes who get it, and Engineers who can do it.

Join Team Rapsodo in defying limits and unlocking limitless potential, one data point and one heart-felt success story at a time.

The Role:

Our Embedded Engineers form a world-class, skilled engineering team that develops applications and drivers for our embedded products.Join our dynamic and growing team as an Embedded Engineer, take the lead in crafting innovative solutions and gaining hands-on experience across diverse domains in embedded systems development.

Key Responsibilities:

As an Embedded Engineer, you will work closely with our software and hardware engineers to work on product evolution as well as support existing products.
This role requires a highly versatile skill set and you will have opportunities to contribute to all relevant domains.
Your responsibilities will include development and enhancing of new and existing products.

Skills & Requirements:

Bachelor’s degree in Computer Science or MSc/MEng in a related field preferred.
Minimum 3-5 years of relevant working experience.
Deep understanding of Embedded Linux.
Experience in middleware programming.
Hands-on experience in developing embedded systems utilizing multiple sensors.
Proficient in developing optimized and time-critical code in C/C++.
Experience with software architecture and/or API design, complemented by robust integration skills.
Excellent communication skills for conveying technical information to both technical and non-technical teams.

Who we are

Crédit Agricole Corporate and Investment Banking (Crédit Agricole CIB) is the corporate and investment banking arm of Crédit Agricole Group, world’s 10th largest bank by total assets.

Our Singapore center (“ISAP” or “Information Systems Asia Pacific”) is the second largest IT setup (after Paris Head Office) for Crédit Agricole CIB's worldwidebusiness. We work daily with international branches located in 30 markets by:

· Envisioning and preparing the Bank’s futures information systems

· Partnering and supporting core banking flagships and transverse areas in their large scale development projects

· Providing premium In-house Banking applications

This unique positioning empowers us to bring our core banking business a sustainable competitive advantage on the market.

We seek innovative and agile people sharing our mindset to support ambitious and forthcoming technological challenges.

Our organization

Within the IT & Operations division, the department Digital Excellence Center (DEC) in Singapore is strong of 150 staff. Our center of excellence have established a recognized expertise on process digitalization and data analytics while our expertise on artificial intelligence is growing.

Every day, we work jointly with domain IT teams or directly with business stakeholders on digitalization of their processes and leveraging on their data while, in the background, we design, build and frame the next generation of shared services.

We strive at organizing ourselves as agile units that leverage on sound expertise and reusable assets for addressing needs of our internal partners effectively.

We value teamwork, collaboration across the board and partnership with our business - we measure our successes through the successes of our clients.

Context

Credit Agricole CIB is engaged in a major digital transformation of its Business and Operations. We believe having a strong data governance, data quality and data lineage in our value chains with other major disruptive technological evolutions.

Over the past years, we groomed our skills, expertise and experience at building effective Data Analytics solutions. We want to sustain and improve them with data management practices.

Role & Profile

In a challenging and multicultural environment, we seek a motivated and skilled Senior Data Engineer to join our Data Analytics team. Data Analytics team is responsible of a portfolio of solutions for various business lines of the bank (Risk, Finance, Compliance, Trade Finance, etc). Data Analytics team deliver solutions primarily based on Microsoft Business Intelligence stack with a focus on performance and reliability. We are evolving and adopting new data technology as per the bank data strategy.

This position requires a candidate with,

§ at least a bachelor degree in computer studies

§ minimum 8 years of experience in Data Engineering role with financing industry, ideally in a banking environment

§ at least 5 years of development experience with using Microsoft Business Intelligencestack covering

o Tabular Analysis Service

o Data warehousing

o Performance tuning

o Data transformations and quality checks

o Power BI dashboarding and reporting

§ good exposure and usage experience in CI/CD tools / processes preferably Azure DevOps

§ ability to design and present technical solutions to architects and to team

§ proactive and problem solving attitude with ability to anticipate risks.

§ strong communication (written and verbal) and organizational skills

Key job responsibilities

You report to Data Analytics team head of DEC.

Role of Data Engineer encompasses:

- Develop and implement techniques and analytics applications to transform raw data into meaningful information using data-oriented programming languages and visualization software.

- Apply data mining, data modelling, natural language processing, and machine learning to extract and analyze information from large structured and unstructured datasets.

- Visualize, interpret, and report data findings and may create dynamic data reports as well.

- Maintain existing BI solutions / ETL pipelines and propose continuous improvements

- Communicate and collaborate with architects, stakeholders, business analysts, and project managers to gather requirements and define technical solution

- Ability to design appropriate solution in compliant to CACIB standards

- Develops detailed technical work plans, estimates, improvement plans and status reports

- Perform regular peer-reviews, maintain low technical debts, assess & up-skill junior staffs

- Ensure the respect of CACIB code of conduct and compliance rules within the team

- Contribute to initiatives managed at department level (continuous improvement, innovation…)

Preferred (additional skills preferred, but not mandatory)

- Exposure to data science technologies or other competitive data processing tools like Python, Spark, etc.

- experience on test driven development

- experience with Data Visualization tools

Responsibilities

• Responsible for providing support to new product development teams
• Responsible in advising customers in the areas of high-speed signal transmission and technology development, in accordance with department strategy and objectives in terms of quality and delivery time.
• Responsible for defining, planning and executing signal integrity deliverables, including modeling, simulation, and testing. Communicate SI deliverables via reports and presentations.

Requirements

• Min Degree in Electronics Engineering, Physics or its equivalent
• Min 3 years of working experience in designing and supporting high speed electrical components
• Proficient in software tools, finite elements simulation of electro-mechanical components as well as mathematical derivation and modeling of electro-mechanical parameters

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for leading root cause analysis & corrective action in nonconformance part investigation
• Responsible for establishing quality inspection plans, COC, procedures/ work instructionsHandle customer/supplier/ internal CARs
• Responsible for planning, coordinating & performing internal audits
• Responsible for performing gap analysis on standards revision and revise procedure/ work instructions
• Responsible for attending to customer/ supplier/ internal /certification audits & technical queries.

Requirements

• Min Diploma in Mechanical Engineering or equivalent
• Min 3 years of working experience in Oil & Gas/ Metal Machining Industry
• Experience in using measuring instruments such as caliper, bore gage, micrometer etc

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

We are looking for a Software Engineer to join our Technology team in developing Payment Applications and Products. The ideal candidate should have knowledge or experience with:

• Java / Spring Framework / Spring Boot / Spring Cloud, HTML / XHTML, CSS, JavaScript
• Microservices Architecture and Event-Drive Architecture concepts
• RDBMS such as MySQL and PostgreSQL
• AWS services such as EC2, S3, RDS, ECS, MSK
• Low-code platform such as Mendix
• Agile / Scrum methodology

Requirements:

• Degree in Computer Science/IT or equivalent with functional knowledge and coding experience
• Familiar with microservice and REST API design concept
• Ability to multitask with strict time constraints, budgets and business goals
• Strong communication skills
• Knowledge of AWS will be an added advantage
• Knowledge of Low-code will be an added advantage
• Knowledge in Fintech industry is an added advantage
• Ability to work independently
• Demonstrate drive and passion to learn new technology skills

Responsibilities:

• Provide desktop support at customer’s site. This includes installation, repair, servicing, liaising and maintenance of solutions in accordance with the manufacturer’s specifications, to ensure customer satisfaction and service operation are achieved
• Conduct installations based on customer’s requirements and company specifications, from site inspections through to final sign-off and acceptance
• Diagnose and perform repairs on equipment and solutions and ensure that relevant updates and patches are applied accordingly on-site or remote diagnostic procedures at customer’s sites
• Initiate escalation procedures and follow up on all open requests of allocated sites to ensure customer satisfaction
• First level troubleshooting of network connectivity in a LAN/WAN environment
• Responsible for tracking hardware and software inventory and report to asset management team on a regular basis
• Assist in user/hardware movement and office relocations
• Maintain defective equipment/parts in maintenance inventory, document customer repairs, maintain and restock assigned parts inventory to ensure proper spare parts levels
• Provide user data and application recovery
• Maintain IT records and track on areas of responsibilities

Requirements:

• Bachelor Degree or Diploma in Engineering, Computer Science/Information Technology or its equivalent
• At least 1 year of experience in a technical service role
• Technical skills in Microsoft Windows, desktop hardware, desktop software application and network environments

Responsibilities

• Responsible for development of new products and product improvements
• Responsible in performing the whole cycle of product design
• Responsible for designing and devleoping of quality product and ensuring manufacturability with other engineering functions involved in product development.
• Responsible in ensuring product designs are validated per customer requirements, respecting international industry standards

Requirements

• Min Degree in Mechanical Engineering, Manufacturing or other relevant discipline
• Min 3 years of working experience in Product Design Development
• Proficient with Pro-Engineer/ CREO/ANSYS/ Autocad

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

• Perform system performance test and evaluation and customer qualification focusing on vision inspection system.
• Evaluating and establishing vision system performance specifications.

Requirements:

• Diploma in engineering discipline
• At least 1 year of field servicing experience in semiconductor industry
• PC hardware, OS and networking knowledge

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R21100996

Responsibilities

• Responsible for improving manufacturing process and equipment capability to achieve higher production yield and quality
• Responsible in driving cost reduction programs through continual improvement activities
• Responsible for supervising plating technicians and operators in meeting manufacturing requirement

Requirements

• Min Degree in Chemical Engineering/ Mechanical Engineering or relevant
• Min 2 years of working experience in plating industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Job Description:

· Provide technical support to users and liaise with development teams for maintenance and updates required

· Optimize applications by integrating new technologies and performing upgrades

· Contribute to manage UAT, demonstrate prototypes and completed applications

· Generate ideas for software innovation based on market trends

· Document development processes, procedures and application version histories

· Keep up with advancements in application engineering and new technologies

· Create efficient and logical databases for clients

Requirements:

· Diploma or higher professional qualification in Computer Science

· At least 2 years of relevant experience

· Proven work experience as an Application Engineer or similar role

· Strong lead developer experience in one or more of the following: Microsoft C#.Net, Microsoft VB.NET, Microsoft SQL Server, Microsoft Azure, PHP, React, Mobile Apps and AWS Micro Services

· Extensive experience in deploying, optimizing, and maintaining software.

· Excellent analytical and problem-solving abilities

· Exceptional customer service, interpersonal, collaboration and communication skills

Responsibilities

• Responsible for performing corrective and preventive maintenance of CCTV Surveillance System
• Responsible in assisting in planning of the Preventive Maintenance Schedule

Requirements

• Min Nitec in Information Technology/ Electronics/ Electrical Engineering or relevant
• Min 1 years of working experience in computer networking, CCTV set up and Video Management System

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for supervising and checking subcontractors’ works according to design drawings, specifications, shop drawings, method statement and local codes and regulations.
• Responsible for design calculation, cost estimation, preparation of plans and details engineering design.
• Responsible for coordinating with supplier / sub-contractor of the tender specification and obtain the quotation from them.
• Responsible for overseeing and be overall responsible for works carried out by junior supervisors assigned under their care.
• Responsible for keeping daily work record, including additional work claims to the clients and from the ubcontractors.

Requirements

• Min Diploma in Mechanical and Electrical Engineering or equivalent.
• Min 3-4 years of M&E working experience with main contractors.
• Strong knowledge of M&E details, working drawings and local construction practices
• Conversant with local codes and regulations.

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible managing waste water plant & DI water plant with existing chemistries, instrumentation.
• Responsible for providing technical support to the plating department water treatment, laboratory and engineering and
• manufacturing activities
• Responsible for leading the water treatment section to resolve all issues related water.

Requirements

• Min Degree in Engineering or relevant
• Min 3 years of working experience in manage water treatment system

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

• Perform IT technical support and hardware troubleshooting and part replacement of IT equipment (servers, storage, desktops)
• Responsible for IT relocation and IT cabling management
• Handle Windows 10 deployment services and AD (servers), PC and notebook deployment services, cloning, on-site set up, etc.

Requirements:

• MCSE/CCNA Certified
• Diploma and above
• At least 2 years of relevant working experience
• Possess Class 3 license (company van will be provided when doing client visit)
• Standby 24x7 on rotational basis

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

• Create mixed-signal verification and coverage plans for complex IC designs based on design architecture and specifications.
• Design and develop verification testbenches based on industry-standard verification languages and methodologies.
• Implement new verification methodologies, tools, and techniques, ensuring scalability and portability.
• Write and deliver test cases to verify mixed-signal circuits for functionality, performance, and reliability.
• Review verification results and provide feedback to design teams.

Requirements:

• Degree in Electrical Engineering or equivalent
• At least 5 years of analog and mixed-signal circuit design and verification experience.
• Strong programming skills and can write efficient programs or scripts in Perl, Python, and/or C.
• Familiar with verification methodologies and tools: simulators, waveform viewers, execution automation, simulation time optimization, and coverage collection.

If you are keen to apply for the position, kindly email your detailed resume in MS Word to [email protected]

Please note that only shortlisted candidates will be notified.

For more job opportunities, please visit our website at www.recruit-expert.com

EA Licence: 19C9701

Registration: R1326740

Responsibilities

• Responsible for analysing, troubleshooting and resolving stamping issues to achieve productivity, quality and cost targets.
• Responsible in assisting in stamping tool design reviews for new product development
• Responsible for establishing process capability, optimum parameter setting, mill cost, Bill of Material (BOM) and work instruction for dies and processes.
• Responsibel in identifying and proposing cost reduction program and upgrading to achieve quality and competitive cost to meet present and future stamping requiremen
• Responsible for providing technical guidance and training to juniors technicians and toolmakers

Requirements

• Min Nitec in Production/ Manufacturing/ Mechanical Engineering/ Tool and Die Making
• Min 5 years of working experience in Stamping Industry

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Job Profile Summary:

In this role, you will mainly be responsible for working with continuous integration, continuous delivery of deployment pipelines amongst other daily activities. You will be part of a diversified, innovative, and highly skilled team. As part of this dynamic role, you will work closely with other platform / application teams to inculcate and influence the DevOps & Engineering way of working

Job Description:

· Assess and evaluate suitability of applications to be on-boarded on the DevOps pipeline

· On-board new applications and build delivery pipelines if needed

· Well versed with Continuous Integration & Continuous Delivery practices and able to apply them

· Well versed with version control practices like GIT

· Well versed with container architecture, container standards, container design, container building and able to assess and establish the need for containers

· Well versed with Infrastructure as a Code principles and technologies

· Familiar with SRE Practice Areas such as, self-service automation, SLAs and SLOs, incident management and post mortems, performance engineering, capacity and scalability as well as distributed design

Who we are looking for:

Competencies

· Expertise in Kubernetes Deployments and Manifests as well as Dockerfile Composition

· Expertise on creating Helm Charts for deployments

· Knowledge of Jenkins or other CI/CD Platforms

· Knowledge of Cloud Computing and familiar with Azure, AWS, etc...

· Expertise in Linux OS (RHCE/LPI Certification will be an advantage)

· Knowledge of networking devices such as Firewalls, Load Balancers, etc...

· Knowledge of GIT

· Coding Skills in some of the following languages (Python, Java, Go, NodeJS)

· Software Engineering Experience would be an advantage

· Architecture / Systems Design Knowledge

· Engineering Best Practices

· UI/UX Development Skills would be an advantage

Personal Traits

· Excellent problem analysis and solving skills, meticulous & methodical

· Strong attention to detail

· Works well across different functions

· Strong sense of drive and commitment to deliver on responsibilities

· Strong verbal and written communication skills

· Works well in a dynamic environment

Working Experience

· More than 5-year experience working in a DevOps / SRE role

What We Offer

· We work in an open office that encourages collaboration and innovation between teams and departments. We believe in a culture that flattens the hierarchy and focuses on accountability, empowerment, and trust in everyone within our organization

Education

Bachelor’s in computer science, Computer Engineering or equivalent. Candidates without a degree, but have extensive experience in DevOps / SRE will be considered as well

Language

Fluent in both spoken and written English

Overview

In alignment with our Microsoft values, we are committed to cultivating an inclusive work environment for all employees to positively impact our culture every day and we need you as Principal Controls Engineer. This is a Singapore based role.

Microsoft’s Cloud Operations & Innovation (CO+I) is the engine that powers our cloud services. As a CO+I Principal Engineer, you will perform a key role in delivering and managing the critical environment infrastructure and foundational technologies for Microsoft's online services including Bing, Office 365, Xbox, OneDrive, and the Microsoft Azure platform. As a group, CO+I is focused on personal and professional development for all employees and offers training and growth opportunities including Career Rotation Programs, Diversity & Inclusion training and events, and professional certifications.

Our infrastructure is comprised of a large global portfolio of more than 100 datacenters and 1 million servers. Our foundation is built upon and managed by a team of subject matter experts working to support services for more than 1 billion customers and 20 million businesses in over 90 countries worldwide.

With environmental sustainability and optimization at the forefront of our datacenter design and operations, we continue to grow and evolve as we meet the ever-changing business demands that hold Microsoft as a world-class cloud provider.

Do you want to empower billions across the world? Come and join us in CO+I and be at the forefront of the action!

Responsibilities

As a Principal Controls Engineer your key responsiblites are outlined below:

• Collaborate with Engineering and Operation teams to gain a comprehensive understanding of the critical environment (CE) designs and operational procedures for colocation data centers. Identify any gaps in these designs and processes and work closely with relevant stakeholders to address and eliminate these risks. This is to ensure the reliability and efficiency of critical data center operations.
• Lead the technical review and analysis of design documents for mechanical systems involving BAS critical environment instrumentation systems, associated controls, electrical systems and monitoring, and overall network topology at Operations turnover, ensuring that colocation data centers comply with Microsoft’s requirements.
• Require a comprehensive understanding of data center controls and operational experience.
• Review the scope of upgrading the controls infrastructure in colocation data centers to improve site utilization.
• Provide guidance to Operations teams through change management on controls systems, troubleshoot BAS and EPMS issues, drive root cause analysis and work with colocation data centers on the resolution. Knowledge of 5 Whys or alternative problem solving techniques would be a requirement and the use of which to investigateunderlying issues such as system design, staffing models, competency, procedures, site requirements, etc.
• Lead technical reviews with colocation data centers to complete system reliability studies.
• Active contribution and participation in the commissioning and validation of system performance, quality, and reliability.
• Perform forensic analysis on incidents which have occurred within the data center infrastructure. Knowledge of FMEA or other alternative process related failure analysis would be an advantage.
• Position as a subject matter expert with the ability to discuss in depth the instrumentation and controls aspects of data center functions, as well as the potential failure modes in critical environments.
• Analyze the performance data of equipment and system to identify potential issues through trend analysis.
• Provide support in resolving operational issues encountered in the production data centers, either remotely or on-site.
• Review compliance with existing corrective and preventative maintenance programs to enhance operational readiness.
• Proactive in driving implementation of lessons learnt from analysis across multiple design, construction, and operational organizations.
• Work with Design Engineering and Site Operations Engineers to establish visual standards, process improvement and error proofing systems to drive efficiency within the business.
• Able to travel to colocation data centers in APAC for onsite assessments when required.
• Able to travel domestically and internationally.

Qualifications

Required Qualifications:

• Bachelor’s degree in related engineering field.

• Professional engineer in the branch of Electrical Engineering with a certificate from their state’s or country’s licensure board

• In-depth knowledge of Electrical Power Monitoring Systems (EPMS), Branch Circuit Monitoring Systems (BCMS), Programmable Logic Controllers (PLC), Distributed Control Systems (DCS), SCADA Systems and Process Controls.

• In-depth knowledge of open BAS protocols and communications - BACnet, LON, MODBUS, Ethernet, Web-Services, html, and others.

• Candidate must possess strong written and verbal communication skills with attention to details.

• Proficiency in creating and delivering presentations using Microsoft Office Suite, including Microsoft Word, Microsoft Excel, and Microsoft PowerPoint.

• Proficiency in conducting intricate and data-driven business case analysis to provide robust justification for making technical decisions.

Experience Required:

• Experience working in mission critical environments that require precise conditions for their operations.

• Minimum 15 years’ experience in mechanical controls engineering, electrical controls engineering or equivalent combination of education and experience in technical discipline specific to HVAC, building automation and EPMS.

• Minimum of 10 years’ experience in consulting engineering, system integration, system manufacturing and/or operation with minimum of 7 years’ experience as lead engineer.

• Strong experience with the operation and maintenance of building cooling and related mechanical systems (HVAC, Chilled Water, DX Refrigerant, Evaporative, and related controls systems).

• Experience with power system analysis and engineering software packages.

• Presented and communicated with C-suite executives at least every quarter.

Background Check Requirements:

Ability to meet Microsoft, customer and/or government security screening requirements are required for this role. These requirements include, but are not limited to the following specialized security screenings:

· Microsoft Cloud Background Check: This position will be required to pass the Microsoft Cloud background check upon hire/transfer and every two years thereafter.

Astek is offering a role of Mid - Senior Level Data Engineer to be based in Singapore.

Responsibilities:

• Manage day-to-day operations for lifecycle data solutions such as collation of metadata, analysis of system operations data (e.g. data quality metrics, usage level of data distribution services).
• Perform data access control operations to ensure data ingested and distributed comply with enterprise data governance and data handling standards.
• Function as the Center of Excellence for the common data lifecycle services offered, defining standards and best practices, and designing process workflows to smoothen operationalization and to ensure compliance.
• Monitor, analyze, investigate, and resolve day-to-day operational incidents and provide advisory to users.
• Identify opportunities for continuous improvement in assigned area of work.
• Manage and maintain strong stakeholder relationship to ensure continuous support and knowledge for existing and future data lifecycle needs.
• Work closely with business (research analysts, quantitative strategist, end-users, etc), data engineers, data scientists to implement and support data solutions that support common functions in the data lifecycle, e.g. data onboarding and data distribution.
• Contribute, influence, and validate the design of lifecycle data solutions to ensure they meet both business and operational needs.

Requirements:

• At least 5 years of relevant experience in data management, data analytics, and data engineering user. Preferably within investment and banking industry.
• Good understanding of the principles, key controls and processes relating to data management, as well as data integration and data distribution.
• Good knowledge and experience in programming languages such as Python, Java, SQL etc.
• Familiar with data visualization tool (e.g. Tableau, PowerBI) and data virtualization technology such as Denodo is advantageous.

Responsibilities

• Responsible for conceptualize the assembly process either in semi-auto, fully automatic machines or multi-purpose fixtures for new products with both quality and cost considerations
• Responsible in planning, excuting and completing assembly process per the established timing and quality requirements.
• Responsible for design, coordinate fabrication, assembly, debug and test run the equipment.
• Responsible for establishing process parameters for all new assembly operations/machines and update all process specifications or issues before release to manufacturing.
• Responsible for production output, quality & yield during the transfer phase to production.

Requirements

• Min Degree in Mechanical Engineering, Manufacturing or other relevant discipline
• Min 3 years of working experience in process development
• Proficient with Mechanical Design, Solid Mechanics theory and its application to product design

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

Responsibilities

• Responsible for attending the customer complaints and develop resolution
• Responsible in planning and coordinating with the Production on non-conformance product screening as well as conducting containment measures and minimizes DMR issued by customers
• Responsible for providing engineering support to Internal Departments related to quality and technical issues

Requirements

• Min Degree in Mechanical Engineering or its equivalent
• Min 1 years of working experience in process or fixture designs

Please kindly email your resume in Ms Word to [email protected]

We regret to inform that only shortlisted candidates would be notified.

Registration Number: R1328870

EA License No. 22C1026

COMPANY DESCRIPTION

Grocery Logistics Singapore (GLS) a wholly owned subsidiary of FairPrice Group Supply Chain, is a well-established logistics player in the Fast Moving Consumers Goods (FMCG) segment, incorporated since January 1993. Other than being the key logistics provider for NTUC FairPrice and its subsidiaries, we had serviced the Dairy Farm Group, Royal Ahold Group (since exited from Singapore Markets) and many small supermarket chains since our establishment.

RESPONSIBILITIES

• Responsible for testing, operate and maintain automated machinery
• Involve in developing and implementing Logistics System, improvement upgrades, maximize efficiency, control maintenance costs and reduce downtime.
• Prepare project materials, cost analyses, estimate yearly retrofit budget and Spare parts management.
• Train the maintenance staffs for new work methodology, observe teams Safety requirements and provide necessary instructions.
• Maintain the reliability and the performance of the all automation and networks systems in the automation layer.
• Utilize equipment Error logs, Event reports, and analysis data from computerized maintenance systems to track equipment reliability.
• Daily checklists review, records equipment PM Work on internal and external service teams.
• Maintain liaisons with other departments to provide necessary support and assist regular MOM PE inspection.
• Able to communicate with oversea IT Online support, Hotline Software Engineers in UK, Australia, Italy and understand the steps to follow up during the troubleshooting with minimum guidance

• Diploma/Degree in Mechatronics, electrical engineering, mechanical engineering or similar field.
• Experience in automation control products such as Siemens IPC, PLC, HMI, SCADA, TIA portal, Various drives and Software hardware. Knowledge onAuto CAD, Microsoft PowerPoint and Operation System knowledge will be preferred.
• Experience with automation equipment such as Conveyors, Lifter, ASRS. Food Procession machines and robotics systems.
• Skills on the electrical testing equipment, dB readings, Inverters settings, Calibration.
• A highly motivated, self-starter with the ability to work under pressure and Cold Room environment in order to complete the daily Operation functions. ie, Ensuring 24-7 Up running, fast moving technologies, new concepts, complex systems and operation timescales will influence your day-to-day work.
• Strong time management skills, self-motivated and able to complete Logistics Maintenance projects, repairs or troubleshooting.
• Hand-on troubleshooting expertise and attention to details.
• Strong leadership and problem-solving skills.
• Proven work experience in Industrial Automation System.

• Work location: 7 Sunview Road