Responsibilities

• Plan, execute, monitor and control the various technical aspect of the project.
• Manage or participate in new setup or upgrade of system/network infrastructure projects.
• Responsible for supporting operational systems satisfying contractual Service Level Agreement
• Perform and manage routine preventive maintenance and operational activities
• Provide project documentation and reports
• Diagnose and rectify technical issue

Requirements

• Experience in Windows server OS, Unix/Linux OS & VM environment
• Good knowledge and hands-on experience with Microsoft SQL Server would be an advantage
• Good Working knowledge with VPN, firewall appliances and Cisco routers/switches
• Excellent written and verbal communication to convey technical ideas to both technical and non-technical audiences and contribute within a team environment
• Pro-active, dynamic and with good analytical/conceptual thinking
• Fresh graduates are welcome to apply

Only shortlisted candidates will be notified.

Please email a copy of your detailed resume to [email protected] for immediate processing.

(EA Reg No: 20C0312)

Job Description

• Lead and manage the electrical engineering design works.
• Prepare and review the design of the electrical works, e.g. equipment sizing, cable sizing and voltage drop calculation, power system study, electrical layout single line diagram, schematic drawings, etc.
• Handle equipment packages and procurement including technical specifications, technical clarification, technical bid analysis, etc.
• Develop cost estimates for electrical equipment and electrical works.
• Develop work schedule and coordination of the project works.
• Review the sub-consultants, sub-contractors and vendors' design and submission, ensuring all project specifications and design standard are met.
• Prepare all relevant checklists for installation, testing and commission works.
• Collaboration with multiple stakeholders including internal teams of different trades, clients, consultants, other packages, sub-contractors, and vendors.
• Attending to client's comments and ensuring client's approval and acceptance of all electrical works related design, installation, testing and commissioning works.
• Handle and resolve all site technical related matters.

Requirements

• Bachelor Degree in Electrical Engineering
• 5 to 8 years of relevant experience in construction industry. Working experience in water or wastewater industry will be an advantage.
• Experience in design, installation, testing and commissioning of electrical works, e.g. high voltage system, low voltage system, transformers, motor starters, cabling works, earthing and lightning protection system, etc.
• Experience in project execution, project coordination, supervision and coordination
  with clients, consultants, and all other sub-tier under the Contractor.
• Good technical knowledge in electrical system.
• Well verse in power system analysis software e.g. ETAP and BIM software e.g. Bentley, Revit and Navisworks.
• Team player with good interpersonal skills.
• Meticulous and analytical with excellent problem-solving skills.
• Able to work under tight deadlines.
• Highly motivated and able to work independently with minimal supervision.
• Will be required to work full time at project site.

Job Description:

• Ensure the smooth operation of MES software and its integration with ERP systems
• Identifying opportunities for process improvement and optimisation
• Monitoring, supporting, and ensuring maintenance and documentation of the MES model in terms of products, routes, operations, equipment, recipes, and lot movements
• Participating in MES-related projects, including project planning, resource allocation, and progress tracking, to ensure successful project delivery within scope, budget, and timeline constraints
• Assist in the planning, implementation and administration of M365 services such as MS Power Automate, PowerBI, SharePoint Online, Teams, Intune, OneDrive and other components
• Support in the conception and implementation up to the introduction of the projects in all phases for a sustainable operation, including Cloud projects
• Further development of our Digital Workplace vision
• Any ad hoc duties assigned by supervisor/manager

Job Requirements:

• Min Bachelor/Diploma in IT with extensive hands-on experience in the area Automation and MES implementation
• Minimum 3 years hands on with MES software platforms implementation and support

Interested candidates do attach your resume to [email protected]

Attn: Wendy Khoo Hui Wen (R1761665)

Recruit Express Pte Ltd (99C4599)

Job Description

• Industry/ Organization Type: IT / Software
• Position Title: Data Center Engineer
• Working Location: Boon Lay
• Working Hours: 5 days, Mon – Fri (Morning Shift 6 AM – 2 PM / Afternoon Shift 2 PM – 10 PM)
• Salary Package: Basic Salary up to $5,000 + AWS + Bonus
• Duration: Permanent Role

Key Responsibilities

• Perform periodic walk-through, validation of equipment status, amber lights check, etc.
• Review work order requests in the queue and respond to semi-routine work orders by adhering to commitment times.
• Escalate and expedite orders to appropriate teams upon standard operating procedures.
• Rack and stack semi-routine customer equipment tickets.
• Support datacenter standard operating cross-connect work order requests.
• Support standard operating testing and standard operating installations of customer assets.
• Support standard operating procedures of layer 1 cross-connect certification testing.
• Any other ad-hoc duties as assigned.

APPLY NOW!!!

• Diploma / Degree in IT/Computer Science, or related field.
• Minimum 1 year of IT experience or equivalent.
• Prior working experience in a Data Center, Network or Server environment would be an added advantage.
• Must be comfortable with shift rotation.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #66104 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

• Activity and resource planning for site.
• Organizing and motivating a project team at site.
• Controlling time management for site.
• Cost estimating and developing the budget for site project.
• Ensuring customer satisfaction.
• Analyzing and managing project risk.
• Planning and monitoring progress of the project.
• Managing reports and necessary documentation.
• Designing and applying appropriate project management standards.
• Managing the production of the required deliverables.
• Preparing and maintaining project, stage and exception plans as required.
• Managing project risks, including the development of contingency plans.
• Monitoring overall progress and use of resources, initiating corrective action where necessary.
• Applying change control and configuration management processes for the site project.
• Experinces in Singapore Process Plant Industry.

[Job ID: 402590]

Responsibilities :

• Attend onboard for maintenance/ inspection/ repair/ troubleshooting/ modification
• Manage field activities and schedule
• Resolve malfunctions
• Oversee repairs and technical improvements
• Install new systems and technology
• Ensure proper maintenance of onsite equipment
• Supervise and direct technicians/engineers onsite
• Making service report with details of job progress, Working/Traveling time, technical advice and recommendation if any
• Report and share job progress to the superior
• Provide technical support & training for customers, service agents and internal teams
• Arranging necessary parts & drawings and send to agent
• Maintain tools in good conditions for safety and high-quality service
• Making manuals / support documents in order to share experiences with other engineers
• Collaborate with team members to achieve better results
• Gather feedback from customers or prospects and share with internal teams
• Review Maintenance list & service report for sales support
• Cover all of Technician responsibilities
• Any ad-hoc duties by assigned

Requirements :

• At least 2 years of Marine Service Engineer experience
• Able to work on sudden occasions (weekends, holidays, etc)
• Able to travel frequently
• Able to adopt on changing work environment
• Eager to learn and acquire skills for new products, system, tasks.
• High sense of work ethic
• Able to handle customer technical support via email, call or messenger services
• Able to work with multidisciplinary team
• Able to handle situations in dealing with customers
• Proficient with the use business PC or laptop, well familiar with Microsoft Office applications (such as MS Word, Excel, Outlook, Powerpoint, Teams)

[Advantage]

• Experience in side thruster.
• Possess knowledge in Marine Engine" Electrical/ Mechanical/ Hydraulic/Pneumatic would be advantageous
• Possess Class 3 Driving License

-------------------------------------------------------------------------------------------------------

We regret that only shortlisted candidates will be notified. However, rest assured that all applications will be updated to our resume bank for future opportunities.

Please kindly refer to the Privacy Policy of Good Job Creations for your reference:

https://goodjobcreations.com.sg/en/privacy-policy/

-------------------------------------------------------------------------------------------------------

EA License no.: 07C5771
EA Personnel Reg. No.: R22107257
EA Personnel Name: Li Wai Chun

Job Description

• Industry/ Organization Type: Manufacturing/ Production (Precision Engineering)
• Position Title: Procurement Engineer
• Working Location: Kaki Bukit
• Working Hours: 5 days (Mon – Fri, 8am – 5.30pm)
• Salary Package: Up to $4,500 + AWS
• Duration: Permanent

Key Responsibilities

• Report to Operations Manager.
• Obtain quotations and purchase raw materials, components, and assign secondary processes to subcontractors.
• Update approved machining subcontractor quotations in the system.
• Issue and manage Work Orders and Purchase Orders.
• Source materials, components, and plating for cost reduction.
• Perform evaluations for company purchases and assist with assigned duties.
• Collaborate with the group sourcing team on procurement evaluations.
• Develop and manage the Supply Chain Management plan.

APPLY NOW!!!

• At least Diploma in Mechanical Engineering with 1 year of related working experience. Preferably from the Manufacturing industry.
• Proficient in Microsoft Office is a must.
• Experience with CRM tools (such as Salesforce) would be beneficial.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #71172 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Adelin Chong | EA Reg No.: R1875641

Job Description

• Industry / Organization Type: Manufacturing
• Position Title: QC Engineer / Quality Control Engineer
• Working Location: Serangoon
• Working Hours: 5 days (Monday to Friday, 8.30 AM - 6 PM)
• Salary Package: Basic Salary up to $5,500 + OT + Variable Bonus
• Duration: Permanent

Key Responsibilities

• Work with Process Engineer & Engineering team on QC requirement
• Document inspection criteria and quality plan
• Work with QA, Process and Product team on corrective action with quality issue
• Work with Process team on in-process audit and FQC audit

APPLY NOW!!!

• Minimum Diploma in Manufacturing /Quality Engineering
• At least 1 year of relevant working experience in Electronics Product Manufacturing environment
• Control of Supplier Quality Assurance (SQA)
• Quality control of in-coming, in-process and out-going products
• Knowledge of ISO 9001, 14001, 13485 & 45001, FDA requirement
• Able to understand IPC requirements in PCB Assembly, quality requirements of plastic molding, die casting, extrusion, metal stamping and machining parts
• Able to converse with overseas suppliers

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Please indicate #65192 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C016 | Angel Lim | EA Reg No: R1769781

1. Installing and configuring computer hardware, software, systems, networks, printers and scanners
2. Responding in a timely manner to service issues and requests in token based or maintenance support based
3. Providing technical support across the company (onsite or remote)
4. Troubleshooting Level-1 cases and escalate if needed
5. Liaising with vendors for maintenance service
6. Onsite deploy network / system projects
7. Other ad hoc duties assigned

Job requirements

1. Higher Diploma or higher in IT/Network/Communication related subject
2. Good working attitude
3. Related experience in IT/Network/Communication industry
4. As most of our clients are China and Hong Kong-based companies and the company's headquarters is in Hong Kong, candidates will need to frequently communicate and coordinate with the headquarters and Mandarin speaking clients to execute/report projects by using English and Mandarin proficiently.

Job Highlights

• Permanent Position / MNC/ Near Woodlands MRT/ Urgent Hiring!!
• Afternoon Shift (Monday to Friday: 3pm – 11pm, Sat: 1pm - & 7pm)
• Afternoon Shift allowance
• AWS bonus, Annual Leave,Medical Benefit, Dental Benefit

Our client is a global advanced precision engineering & manufacturing solutions provider.

Responsibilities

• Responsible for all automation related activities of the product.
• Responsible for the Maintenance and Repair of production automated machines.
• Optimise automation parameters and meeting specific cycle time for existing and new products.
• To provide timely support to ensure efficiency of production machines & equipments are met.
• To work with respective department on product quality issues.
• Initiate containment plan and implement effective long term plan on quality related issues
• Attend to all daily quality and process related issues.
• Execute process validation for new and existing products with tooling and quality personnel.
• Continuous Improvement to enhance quality and productivity through automated processes
• Perform internal quality system audit.
• Train and assess production staff on processes and product where applicable.
• Attend routine production and quality meetings
• Execute engineering change notice from customer.
• Analyze quality data collected periodically and provide recommendation to management for improvement

Requirements

• Degree/Diploma in Engineering-related discipline, preferably Mechatronics
• Knowledge in ISO9001, ISO13485, TS16949, familiar with FMEA
• Results-oriented, meticulous and a self-motivated team player

Interested candidates, please e-mail resume in Word document (indicating your current salary and expected salary) to:

Ryan Tan (EA Reg. no.: R23116422)

Recruitment Manager

Right Recruit Pte. Ltd.

10 Anson Road, #33-03, International Plaza, Singapore 079903

EA Licence No: 23C1743

[email protected] I www.rightrecruit.com.sg

Requirements

• Experience in a similar role, ideally in the Pharmaceutical and/or Biotechnology industry.
• Emerson DeltaV DCS system experience and DeltaV Batch experience required
• Experience in the Designing and commissioning of DeltaV DCS project for GMP manufacturing site.
• Technical proficiency on controls systems including familiarity with control panels, networking, panel/field wiring and PLC control systems.
• Through understanding of Batch s88 standards (CM, EM, Phases, Recipes, Units etc)
• Familiarity with GAMP lifecycle and quality management processes employed in the pharmaceutical sector
• Ability to work well in a team environment
• Supervise and conduct system testing Factory Acceptance Test (FAT)
• Excellent computer skills, proficient in the use of the following Microsoft tools: Excel, SharePoint, Word and PowerPoint.
• Excellent communication and customer orientation skills
• Good analytical & problem-solving skills
• Ensure project Automation Strategy is followed.

Job Description

• Collaborate with stakeholders (customers, partners, colleagues) on data-related technical issues and infrastructure needs.
• Work with data scientists to gather data requirements for modeling.
• Design, develop, document, manage, and maintain data models, ETL processes, data warehouses, data management, and pipeline solutions for large volumes of structured/unstructured data from various sources with different latencies (on-demand, batch, real-time, near-real-time).
• Define, monitor, and report SLAs for data pipelines and products.
• Ensure data security and governance standards are met.
• Execute data quality assurance practices.
• Support data management solutions pre-sales initiatives, proposal development, and provide post-sales support.

Technical Knowledge/Skills/Competencies

• Expertise in relational/non-relational/NoSQL databases and enterprise data warehouses/marts.
• Proficiency in big data technologies (e.g., Hadoop, Spark, Hive, HBase).
• Knowledge of data ingestion technologies (e.g., Flume, Kafka, NiFi).
• Experience in scripting, programming, and software development (e.g., Java, C/C++, Python, R, MATLAB, Scala, SQL) for Windows or Linux.
• Experience in master data management, data governance, and data lifecycle management.
• Skilled in designing, documenting, implementing, and supporting data management solutions.
• Familiarity with software engineering best practices (development, programming, testing, version control).
• Knowledge of data privacy and security assurance.
• Understanding of machine learning, computer vision, and large language models is a plus.

Soft Skills

• Excellent written and verbal communication skills.
• Highly organized, motivated, independent, and resourceful team player.
• Strong analytical thinking, interpersonal, and problem-solving skills.
• Ability to work productively in a matrix reporting and fast-paced environment.

Only shortlisted candidates will be notified.

Please email a copy of your detailed resume to [email protected] for immediate processing.

(EA Reg No: 20C0312)

• Plan, execute, and monitor technical aspects of projects.
• Manage or support system/network setup and upgrades.
• Ensure operational systems meet Service Level Agreements.
• Perform routine maintenance and operational tasks. Provide project documentation and reports.
• Diagnose and resolve technical issues.

Requirements:

• Experience with Windows Server OS, Unix/Linux OS, and VM environments.
• Knowledge of Microsoft SQL Server is a plus.
• Familiarity with VPN, firewall appliances, and Cisco routers/switches.
• Strong communication skills for technical and non-technical audiences.
• Proactive, dynamic, and analytical.
• Fresh graduates welcome

(EA Reg No: 20C0312)

Please email a copy of your detailed resume to [email protected] for immediate processing.

Only shortlisted candidates will be notified.

Job Description

• Industry/ Organization Type: Precision Engineering
• Position Title: Maintenance Engineer
• Working Location: Bukit Batok
• Working Hours: 5 days (Mon – Fri, 8.00am – 5.30pm)
• Salary Package: Basic salary up to $3,000 + Variable Bonus + OT
• Duration: Permanent Role

Key Responsibilities

• Create and execute regular maintenance plans for all machinery and equipment.
• Identify and fix issues with mechanical, electrical, and pneumatic systems in CNC machines and other equipment.
• Help with setting up and starting new equipment.
• Keep detailed records of all maintenance work, including logs, reports, and manuals.
• Follow all health and safety rules and foster a safe workplace.
• Spot areas for improvement and introduce changes to better equipment efficiency and reliability.
• Manage spare parts inventory and handle ordering as required.
• Cooperate closely with production, quality, and engineering teams to meet operational objectives.

APPLY NOW!!!

• Bachelor's degree or Diploma in Electrical or Mechanical Engineering or related field.
• 3-5 years in maintenance engineering in related field
• Good understanding of CNC machines (Fanuc control) and PLC programming.
• Experienced with AUTOCAD and Microsoft Office Suite.
• Willingness to work outside regular hours if necessary

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #67933 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Rachael Lee | EA Reg No.: R2093131

Job Description

• Industry/ Organization Type: Manufacturing
• Position Title: Validation Engineer
• Working Location: Tai Seng
• Working Hours: 5 days (Monday to Friday, 8.30 AM – 6 PM)
• Salary Package: Basic Salary up to $6,000 + AWS + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Assist Quality and Validation Manager Asia to complete the tasks on time with good quality.
• Responsible for the successful execution of the Validation functions for customer projects, as required – Quality, Cost, and Time.
• Responsible for driving and supporting the project team for projects where validation is required and ensuring execution complies with company's standards.
• Provide training on qualification activities.
• Responsible for maintaining qualification documentation standards and procedures.
• Create and maintain qualification/validation documentation from the design phase of projects for mechanical, software, and hardware parts.
• Lead the qualification/validation activities of projects (risk analysis, protocol drafting, and test execution during FAT/SAT) internally and at our partners' sites (approximately 20% of the time on travel throughout the year).
• Any other ad-hoc duties as assigned.

APPLY NOW!!!

• Diploma/Degree in Mechanical Engineering or equivalent
• Has 2 years of working experience in quality or validation of automated systems (mechanical, software, hardware) or equivalent
• Prior work experience in control systems design is advantageous
• Excellent understanding of assembly, test & debug procedures

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #69403 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Our clien is looking a experience analog chip designer engineer, this candidate must have at least 3 year work experience in similar role.

Your job responsiblities are:

-Use simulation tools to predict circuit behavior, identify potential issues.

- Design and develop high performance digital standard cell libraries tailored to meet critcal design specification, performance, power consumption.

- Work closely with layout design team to ensure accurate and efficient implementation of the physical layout of both analog and digital standard cells.

- Competent in PERL, TCL, Python and C++.

- Proficiency in schematic Capture & Simulation ( Cadence Virtuoso, Spectre)

Job Description

• Industry/ Organization Type: Building & Construction
• Position Title: Site Engineer
• Working Location: Pioneer
• Working Hours: 5.5 working days (Mon to Fri 8 AM – 5 PM, Sat half day)
• Salary Package: Basic Salary up to $6,500 + AWS + Variable Bonus + Transport Allowance
• Duration: Permanent

Key Responsibilities

• Handle daily construction activities, ensuring works progress according to the project schedule, design, and safety standards.
• Provide technical support and guidance to construction workers, subcontractors, and other engineers on-site.
• Ensure that construction methods and materials used meet project specifications and quality standards.
• Coordinate with project managers, contractors, and other team members to ensure smooth and successful execution of the project.
• Conduct regular inspections of construction activities to ensure the quality of work meets industry standards and the specific requirements of the project.
• Any other ad-hoc duties as assigned.

APPLY NOW!!!

• Minimum Diploma in Civil Engineering or related qualification
• Has experience with the Land Transport Authority (LTA), Strategic Planning Policy Group (SPPG), or Defence Science and Technology Agency (DSTA)
• Prior experience with road and airfield runway construction and resurfacing is required
• Proficient in MS Office
• A class 3 driving license is required

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #69580 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

Job Description

• Industry/Organization Type: Supply of Environmental Systems
• Position Title: Sales & Project Engineer
• Working Location: Boon Lay
• Working Hours: Monday – Friday, 8.45 AM – 6.15 PM
• Salary Package: Basic Salary up to $4,500 + HP Allowance + Performance Bonus
• Duration: Permanent

Key Responsibilities

• Achieve individual sales target by conducting the full sales cycle of lead generation, follow-up, service delivery and closure of transaction.
• Detail work includes managing and understanding clients’ requirements and assessing equipment needs, preparing and delivering sales proposals, technical presentations.
• Maintain relationships with suppliers and stakeholders.
• Provide continuous after-sales support such as aiding clients to identify problems with installed equipment (if any), recommending improved material, machinery or parts for replacement and maintenance.
• Direct and monitor daily activities to align the project progress and quality goals.
• Implement and adhere to the sales plan set by the manager with the aim of expanding the company’s customer base.
• Collaborate with team to compile information for tender submissions.
• Actively enhance personal knowledge of supplier’s products to introduce technology that adds value to the clients.
• Evaluate sales activities with the management weekly, including the status of prospective customers, plans to meet sales targets and status on deadlines.
• Collaborate with Sales Manager, producing reports regularly to communicate with supplier on sales activities and status of project.

APPLY NOW!!!

• Minimum Diploma in any engineering field.
• Candidates with at least 1 year of Sales experience will be advantageous.
• Candidates without experience are welcome to apply as training will be provided.
• With prior experience with tender systems such as Gebiz
• With Class 3 Driving License.

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to Job(at)anradus.com.sg. Kindly indicate #69796 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it’s likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

The DDI specialist we're seeking will lead the design, deployment, and management of regional DNS, DHCP, and IP Address Management (DDI) infrastructure for a leading global bank. The specialist will act as a point of escalation for the Network Operations team, providing expert support to resolve complex issues and ensure smooth operations.

Responsibilities:

• Manage the regional DDI (DNS, DHCP, IP Address Management) infrastructure.
• Plan and execute the deployment of DDI solutions, ensuring seamless integration with existing network infrastructure.
• Serve as a point of escalation for the Network Operations team, providing expert-level support and troubleshooting assistance.

Experience required:

• Experience with DDI solutions, strong preference for Bluecat or alternatively Infoblox.
• Strong knowledge of DNS, DHCP, and IP Address Management principles and protocols.
• Experience in configuring and troubleshooting IPAM products in a large scale environment.
• Strong understanding of NTP and PTP
• Exhibit robust comprehension of change management principles.

We regret to inform that only shortlisted candidates will be notified.

EA Reference: Moss Venetia, R1980847

Allegis Group Singapore Pte Ltd, Company Reg No. 200909448N, EA License No. 10C4544

What will you do?

• Takes ownership for validating the project’s statement of work and contract terms with the customer, including both technical and commercial elements, becomes lead contact for customer for balance of project order. (Project Initiation).
• Develops a project schedule and communicates with the customer to ensure expectations are being met. Direct engagement with internal manufacturing facilities and third party vendors. (Project Planning).
• Monitor the execution of the customer’s project order, verifying execution of the project through kick-off meetings, communication to all parties and exchange of technical requirements and project plan information, performance of factory acceptance, site acceptance, site energization preparation. (Project Execution)
• Lead the monitor and control of the performance of the customer’s project through its lifecycle. Key activities include task completion verification, project team monitoring, managing the exchange of project updates across the project team members, schedule reporting, issue resolution, and contract administration. (Monitor and Control Project Work)
• Lead the closeout of the customer’s project to include financial reconciliation, verification of job site equipment arrival, installation, start-up, and training support completion through review of internal system information, contact with the customer, and coordination with support services such as field services, after-shipment support, and training functions. (Project Close)
• Compares/differentiates/propose alternate products with additional customer value compared to competition.
• Solves problems with customer interaction that results in positive feedback and improved relationship.
• Utilizes a base knowledge of Schneider Electric products and their use would be an advantage and demonstrates an understanding of the fundamental knowledge, processes and terminology needed for effective project management.
• Manage, control and supervision of site activities, including preparation of method of statement, site risk assessment, liaise with customer’s safety personal and provide guidance and instruction to vendor for installation, testing and commissioning

What qualifications will make you successful?

• Diploma / Degree in Electrical Engineering or Equivalent.
• 3-5 years proven track record in managing electrical equipment and package projects
• Familiar with standards and regulatory requirements.
• Commercial and legal implications of contracts.
• Good understanding of budgeting and financial implications, including cash flows
• Proficient in English and computer literate.
• Good knowledge of contract law and trade documents, project management.
• Good knowledge of electrical distribution systems and standards.
• Proactive & able to work independently.

Do you dream of working in a company that is driven by a meaningful purpose? An inclusive company that empowers you to do your best and be innovative?

We are a looking for QA/QC Engineer (Contract) to make an impact! In this role, you will be accountable to build and drive the quality processes, execution and teams for its Data Centre projects in APAC. You will work closely with the project sponsors and project management team to define the project objectives, create a plan for executing those objectives. Dependant on the systems demand, the role will include working on multiple projects or directly on a single specific project in APAC.

At Schneider Electric, we believe access to energy and digital is a basic human right. We empower all to do more with less, ensuring Life Is On everywhere, for everyone, at every moment. We provide energy and automation digital solutions for efficiency and sustainability.

What will you do?

• Ensure Quality-related activities on the Project are compliance to Corporate, Project, and other applicable Regulatory requirements.
• Implement BIM360 QA/QC dashboards to show overall KPI metrics and status, and manage documentation tracking, distribution and submission through various collaboration tools.
• Generate Project high-level Plans/Guidelines to provide roadmap for key Quality related activities.
• Ensure knowledge transfer / lessons learnt of execution issues to local customer & SE teams. Ensure compliance to overall program.
• Ensure adequate and suitably qualified Quality team resources are available to support Project Quality requirements.
• Involve in Project Review in conjunction with Engineering/Construction phases of the Project and ensure appropriate closure of observations/issues raised from review, generation of final review closeout report.
• Ensure Project SOP’s/Plans/Guidelines are appropriately authorized for implementation and adequate training provided.
• Develop, implement and manage an effective Audit Schedule focusing on the key work processes, and design activities undertaken during the project lifespan.
• Review and approve Quality Records/Reports, Engineering Drawings, Change Notices/Design Modifications, Quality Plans, Inspection Test Plans, etc.
• Conduct and maintain training program for relevant project personnel for Project SOP’s/GDP/GEP applications.
• Continually identify and proactively manage project risks and issues, ensure execution of corrective action plans up to closure.
• Implement systematic documentation turnover system for all Project Quality related documentation.
• Manage day-to-day activities of the Project walk down teams.
• Plan, prepare, review and execute project system walk down packs to transfer punch items into Master Punch list database (BIM360), approval and issuance of Construction Completion Certificate.
• Provide support and advice on Quality-related issues and resolution of engineering-related disputes.
• Responsible for any other related QAQC matters as requested by management.
• Be seen as the trusted advisor for our customer.

What qualifications will make you successful?

In this role practical experience will carry a high weighting than formal qualifications: -

• Bachelor’s Degree in Engineering or any other related discipline from recognized university.
• Minimum of 5 years of relevant work experience in BMS, HVAC, or Industrial Controls / Automation industry.
• Has an excellent working knowledge of the technical and operational environment in which the project deliverables are created and in which they are used.
• Must be an excellent communicator at all levels both internal and external in the project environment, be proactive and exhibit strong leadership qualities and be able to adapt to a dynamic and geographically disbursed environment.
• Position is to be base at client’s site.
• Able to commit to the full duration of the contract

What's in it for me?

• Global Family Leave
• Comprehensive medical coverage for employee
• Worldwide Employee Stock Ownership
• ...... and more!

Let us learn about you! Apply today.

APPLICATION SECURITY ENGINEER RESPONSIBILITY :

• Conduct white box and black box security scan, harden systems and application platform • Develop scripts to automate systems hardening and security vulnerability assessment

• Maintain security test suite in QA build

• Optimize system performance and reliability to enhance user experience.

• Conduct code reviews to ensure code quality and securityWork with Software Quality Engineer on system integration testing

• Work with Software Quality Engineer to manage defect life cycle

• Work with Software Quality Engineer to improve testing processes and tools

• Take on secondary role as an Application Performance Engineer or Software Quality Engineer

• Collaborate with cross-functional teams to enhance security in the development pipeline

EXPERIENCE AND SKILLS NEEDED :

• Min 2 years of experience in application security vulnerability assessment, analysis and remediation

• Experience in agile development environment will be an added advantage

• Experience with continuous integration and continuous delivery, using Gitlab or other similar tools will be an added advantage

• Experience in public cloud providers such as GPC, GCC (i.e. AWS, Azure, Google Cloud) will be an added advantage

• Experience with OWASP ZAP, Burp Suite, SQL Map, Nessus, Nmap, Fortify WebInspect or equivalence will be an added advantage.

• Experience with Checkmarx or equivalence will be an added advantage

• Certified Secure Software Lifecycle Professional (CSSLP), Certified Ethical Hacker (CEH), Certified Information Systems Security Professional (CISSP) or equivalence will be an added advantage

• Experience using Dynamic Application Security Testing (DAST) Tools such as ZAP, Burp Suite, Micro focus WebInspect or equivalence will be an added advantage.

• Experience using Static Application Security Testing (SAST) Tools such as Micro focus Fortify, Checkmarx or equivalence will be an added advantage.

• Security testing-specific certifications such as Offensive Security Certified Professional (OSCP), GIAC Certified Penetration Tester (GPEN), GIAC Web Application Penetration Tester (GWAPT), CREST Registered Penetration Tester (CRT) or equivalence will be an added advantage.

• Risk management-specific certifications such as Certified Secure Software Lifecycle Professional (CSSLP), Certified Information Systems Security Professional (CISSP) or equivalence will be an added advantage

• Degree or Diploma in Computer Science, Computer or Electronics Engineering, Information Technology or related disciplines.

Responsibilities

• Responsible for the design and delivery of DeltaV application system on site.
• Participate in the development and implementation of Automation solutions in line with S88 standards for the plant.
• Development Commissioning & Qualification protocols from C&Q Plans
• Creates and maintains applications according to technical design and requirements.
• Develop and/or review System Development Life Cycle (SDLC) deliverables, compliant with the site’s standards. Determine the processes and data flow that supports the needs of the project.
• Design & Develop plan for modifications to be made to the system through working with team in development of systems architecture, specifications, controls strategies, sequence of operations through all stages.

Requirements

• Experience in a similar role, ideally in the Pharmaceutical and/or Biotechnology industry.
• Emerson DeltaV DCS experience and DeltaV Batch experience required
• Experience in the Designing, Commissioning & Qualifications of DeltaV DCS project for GMP manufacturing site.
• Technical proficiency on controls systems including familiarity with control panels, networking, panel/field wiring and PLC control systems.
• Through understanding of Batch s88 standards (CM, EM, Phases, Recipes, Units etc)
• Familiarity with GAMP lifecycle and quality management processes employed in the pharmaceutical sector
• Ability to work well in a team environment
• Supervise and conduct system testing Factory Acceptance Test (FAT)
• Excellent computer skills, proficient in the use of the following Microsoft tools: Excel, SharePoint, Word and PowerPoint.
• Excellent communication and customer orientation skills
• Good analytical & problem-solving skills
• Ensure project Automation Strategy is followed.

Responsibilities

• Troubleshoot and provide solutions for MES & ERP problems in recipe execution and recipe authoring.
• Liaise with QA to provide approved change control documentation for all MES system changes.
• Design, create, write and execute to a high-quality standard, test and validation protocols, risk assessments, and system documentation.
• Design, create, write and/or make all required changes to MES & ERP Recipes, worksheets, equipment and material spec's including phase transition logic to a high-quality standard.
• Design, create, write and/or make all required changes to ensure cleaning, equipment and product procedures are aligned to MES processes and vice versa.
• Design, create, write and provide training for all other site personnel on their related MES roles and arrange system access.
• Participate in MES knowledge exchanges, MES Governance meetings and manage issues, work-around and fixes identified.
• Work closely with IT regarding upgrades, patching, hardware support, security and system access and provide technical expertise in implementing upgrades and patching.
• Liaise with Global MES on required system improvements.
• Provide support to other MES system users as required to ensure business continuity.
• Participate in MES projects from initiation to ensure MES system or hardware requirements are taken into consideration.
• Ensure maintenance/replacement of MES hardware, printers, scales, scanners and bar-code labelers. Review for upgrades periodically.
• Keep other MES Team Members up to date on MES changes Documentation of all activities in line with cGMP requirements.
• Cross training within the team and training of new team members.
• Participation in continuous improvement programs to implement improvements in the quality, safety, environmental and production systems.
• Adheres to and supports all health and safety standards, procedures and policies.

Requirements

• Werum PAS-X/Aspen/Syncade, Siemens MES (Camstar / Opcenter / Simatic IT) product hands-on experience for full application configurations including interface with SAP and automation systems
• In-depth of knowledge of Pharmaceutical business process (Chemicals (W&D, Solid bulk Mfg., packaging and other unit operations), Bio Pharma processes)
• Creation of business process flow diagram
• Master Batch Record creation in Werum PAS-X
• Knowledge on Industry Standards S88 and ISA S95
• Experience working on projects in the pharmaceutical and/or biotechnology industries knowledge of GAMP lifecycle and quality management processes employed in the pharmaceutical sector Excellent communication skills and collaborative with team members and external groups

RESPONSIBILITY

• Assist Product Owner and Business Analyst to craft out user story acceptance criteria • Analyse and decompose complicated software systems, and design a holistic test strategy • Conduct research on emerging technologies and develop test automation framework • Develop test suites of test scenarios and test cases • Take a risk-based approach for test automation • Perform time boxed exploratory testing • Maintain regression test suite in QA nightly build • Actively refine smoke test suite in Development CI environment • Lead system integration testing with other system owners • Manage user acceptance testing • Manage defect life cycle, test artefacts and repository • Drive continuous improvement in agile testing practices and tools • Take on secondary role as an Application Performance Engineer or Application Security Engineer EXPERIENCE AND SKILLS NEEDED • Min 3 years experience in exploratory testing and regression test automation • Strong analytical skills • Meticulous attention to details • Good interpersonal skills such as tactfulness • Good presentation and listening skills • Experience in agile development environment will be an added advantage • Experience with Robot Framework, SikuliX, Selenium, playwright, Micro Focus Testing Tools (Mobile Center, UFT, QC and Sprinter) or EggPlant will be an added advantageb • Certified Software Testing Professional and/or Certified Software Quality Analyst will be an added advantage • Degree or Diploma in Computer Science, Computer or Electronics Engineering, Information Technology or related disciplines