Job Description:

· Overseeing the daily site activities and progress, planning, implementation and monitoring work schedules in accordance with the master and detailed work programmes.

· Coordinate with different departments concerning the site work activities.

· Work closely with sub-cons, highlight any work-related matters for team's discussion and solutions.

· Supervise works on-site for proper work execution and safety.

· Handle any engineering/technical issues.

· Prepare daily progress reporting and maintain records that are up to date.

Requirement:

· Minimum a Diploma / Degree in Civil Engineering or equivalent.

· Able to work independently with minimal supervision under tight schedule.

· Meticulous and good communication.

Job Description

To conduct laboratory tests (using e.g. electrodynamic shaker and temperature/humidity chambers) in accordance with the test procedure.

To direct the test operator on the operation of test equipment (e.g. electrodynamic shaker and temperature/humidity chambers) to meeting the test requirement [NOTE: There are several laboratories which the technician is required to make (approximately 10 trips) to these laboratories every quarter.

To liaise with equipment designers by coordinating the date/time to perform functional checks on Product Under Test.

To perform visual inspections of Product Under Test before and after tests in accordance with visual inspection checklist.

To inform customer on any test anomaly to discuss on follow-up action required.

To provide records of test and visual inspection results.

To perform mechanical drafting & design works.

Requirements

• Higher NITEC / Diploma in Mechanical Engineering

• ESS/PDU/GD&T experience will be advantageous but not essential

• Able to work independently with minimum supervision

Working Hours

The working hours are as follows:

Mondays to Thursdays: 8:30am to 6:00pm

Fridays: 8:30am to 5:30pm

Lunch: 1 hour

Location: Jurong East

Working hours - Mon – Fri, 8.30am – 5.30pm

Requirements

• Handling of equipment for military and security (eg Chemical Detector, Radiation detector, Biological Detection Systems for Military , Acoustic Hailing Equipment / System etc)
• IT software installation and configuration.
• Handling enquiries on products such as post-sales delivery of equipment
• Carry out maintenance,diagnostic analysis, trouble shooting and repair work for equipment.

Requirements

• Higher Nitec / Diploma in Electrical & Electronics Engineering with min 5 years relevant experience
• Experience in customer relations.
• Able to do Stand-by duty if required

To Apply or find out more information on this role, please email us or send in your updated resume to: [email protected]

Shelly Tan Bee Leng (Reg. No. R2199458)

STAR CAREER CONSULTING PTE LTD (EA License: 20C0353)

• Analyse problems, perform troubleshooting and track problems through resolution.
  Responsible for monitoring activities, such as network and bandwidth usage.
• When necessary, escalate problems to the appropriate stakeholders/principals.
• Ensure the generation and management of support tickets according to SLA requirements.
• Schedule and run periodic maintenance for network infrastructure at the data centre.
• Plan and manage change requests and/or maintenance activities for network operations, including firmware patches.
• Ensure zero service level breaches and achieve 100% compliance with policy and procedure.
• Perform Change Requests and Service Requests as assigned by the team lead according to the SLA.
• Manage Cisco routers and switches and perform firmware patching on network equipment.

Requirements:

• Degree/Diploma in Computer Science, Computer Engineering, or equivalent; however, consideration will be given to experience and certifications in lieu of a degree.
• Minimum of 3 years of experience working as a network engineer within the operational environment.
• Good grasp of technical skills (network).
• Must possess CCNA/CCNP certification.
• 5 day week at AMK area (Data Centre environment)

Maestro HR

damien lee tian hong

R1106726

16C8462

Responsiblities:

• Perform quality checks on structural, architectural and ensure that the design and construction works comply with all the relevant statutory acts, regulations and practices
• Conduct site inspections, supervise and check the works to ensure smooth progression and timely completion of quality works according to CONQUAS requirement
• Monitor the performance of the workers for all trades and ensure any defects are rectified
• Implement QA/QC procedures
• Ensure safety & compliance of work on site
• Monitor & coordinate project progress
• Control of materials, etc.

Requirements:

• Degree in Building / Civil Engineering or related discipline
• At least 3 years experience in relevant field
• Able to work in Jurong Island
• Good interpersonal and communication skills
• Mon to Sat (Ability to work beyond normal working hours)

Responsiblities:

• Perform quality checks on structural, architectural and ensure that the design and construction works comply with all the relevant statutory acts, regulations and practices
• Conduct site inspections, supervise and check the works to ensure smooth progression and timely completion of quality works according to CONQUAS requirement
• Monitor the performance of the workers for all trades and ensure any defects are rectified
• Implement QA/QC procedures
• Ensure safety & compliance of work on site
• Monitor & coordinate project progress
• Control of materials, etc.

Requirements:

• Degree in Building / Civil Engineering or related discipline
• At least 3 years experience in relevant field
• Able to work in Jurong Island
• Good interpersonal and communication skills
• Mon to Sat (Ability to work beyond normal working hours)

Salary: Up to $4600

Benefits: AWS + VB (3 months), Career Progression

Working Days: Mon - Fri, 8am - 4.45pm

Location: Jurong Island (Company transport provided at designated points)

Responsibilities:

• Design, synthesize, and characterize new polymers using various techniques (spectroscopy, chromatography, thermal analysis). Investigate structure-property relationships.
• Develop, optimize, and troubleshoot mass production processes to improve productivity and cost-effectiveness. Collaborate with other departments for seamless integration of new polymers into production lines.
• Perform tests to evaluate polymer properties (mechanical, thermal, electrical), determine suitability for applications, and modify formulations based on performance needs.
• Document research, present findings, collaborate with others to achieve project goals, and provide training on new products/processes.
• Ensure safe lab operations (5S), train new staff, plan and schedule lab work, manage equipment and inventory, and maintain chemical inventory.
• Perform other tasks as assigned by the manager.

Requirements:

• Degree in chemical engineering, Polymer synthesis chemistry, or equivalent.
• In-depth knowledge of polymerization mechanisms and kinetics.
• Expertise in polymer characterization (using spectroscopy, chromatography, and thermal analysis).
• Understanding of material safety data sheets (SDS) and relevant Singapore regulations.

Applicants who possess relevant experience for the above responsibilities are most welcome to apply. If you do not possess the above experience, your application will still be considered on individual merits and you may be contacted for other opportunities.

Please submit your updated resume in MS Words format by using the APPLY NOW BUTTON.

By submitting your personal data and/or resume, you give consent to collection, use and disclosure of your personal data and/or resume by the company (or its agent) for the purpose of the processing and administration by the company relating to this job application.

Hui Yew Cheong

Registration Number: R24124511

EA License No: 06C2859 (MCI Career Services Pte Ltd)

Project Coordination:

* Assist in planning, scheduling, and coordinating project activities to ensure timely completion.

* Communicate with stakeholders, including contractors, suppliers, and team members, to ensure alignment on project goals.

Technical Support:

*Provide technical assistance to the Project Engineer or Manager.

*Interpret engineering drawings, specifications, and technical documents.

*Conduct site visits to monitor project progress and ensure compliance with design and safety standards.

Documentation and Reporting:

*Maintain accurate project documentation, including progress reports, meeting minutes, and project logs.

*Prepare reports on project status, highlighting risks, issues, and solutions.

Quality Assurance:

*Ensure that all work is carried out according to approved plans and standards.

*Assist in inspections and testing to confirm compliance with quality and safety regulations.

Procurement and Logistics:

*Coordinate with procurement teams for materials, tools, and equipment required for the project.

*Track deliveries to ensure they align with project timelines.

Cost and Budget Monitoring:

*Support the monitoring of project budgets and expenses.

*Prepare cost estimates and assist in managing financial resources efficiently.

Health, Safety, and Environmental Compliance:

*Assist in implementing safety protocols and procedures on-site.

*Monitor compliance with environmental and safety regulations.

Problem Solving:

*Identify and resolve technical issues that arise during the project lifecycle.

*Escalate significant concerns to the Project Engineer or Manager.

Skills Required:

*Good communication and interpersonal skills for coordinating with teams and stakeholders.

*Analytical thinking and problem-solving abilities.

*Attention to detail to ensure precision in documentation and execution.

Job Responsibilities

• Analyse, design, develop, customize, implement, and maintain the assigned systems.
• Work closely with Team Leader to gather requirements from the customer, perform technical impact analysis and estimate effort for development.
• Prepare and/or update and review technical documents.
• Manage offshore development teams to ensure technical standards and quality are met.
• Perform code review to detect any potential coding problems.
• Perform unit test and system integration test, support user acceptance test.
• Prepare release procedure and support production implementation.
• Troubleshoot issues and problems to provide workarounds.
• Perform root cause analysis and come up with preventive measures.
• All other duties and tasks as assigned.

Job Requirements

• Bachelor’s degree in computer science or information technology with min. 5 years' experience in software development using Java technologies (J2EE, Spring Framework) and front-end technologies (JavaScript/Angular/AngularJS), preferably in a bank or financial institution.
• Experience in working with offshore team is an added advantage.
• Hands-on experience in deploying, and maintaining, cloud-native Java applications on Microsoft Azure is an added advantage.
• Hands-on experience in Newgen BPM system preferred.
• Good knowledge in SDLC methodologies (Waterfall and/or Agile).
• Good presentation, communication, and coordination skills.
• Proactive and self-motivated.
• Ability to contribute individually and collaborate well in a team.
• Strong sense of accountability and ownership.

Key Responsibilities

1. Middleware Management

• Install, configure, and manage Red Hat Middleware products such as JBoss EAP, Fuse, and AMQ.
• Troubleshoot middleware issues and optimize performance.
• Collaborate with application teams to ensure seamless middleware integration and deployment.

2. DevOps Practices

• Promote and implement DevOps best practices, including CI/CD pipelines and infrastructure as code.
• Collaborate with cross-functional teams to streamline workflows and improve overall efficiency.

3. Incident Management

• Respond to incidents and outages, providing timely resolutions and root cause analyses.
• Participate in on-call rotations and provide after-hours support as required.

Qualifications

• Experience:3–5 years of hands-on experience with OpenShift, Ansible, and Red Hat Middleware.
  Strong understanding of containerization, virtualization, and cloud technologies.
  
• Technical Skills:Proficiency in scripting languages such as Python and Bash.
  Expertise in configuration management tools.
  Strong background in Linux administration and networking.
  
• Soft Skills:Excellent problem-solving and troubleshooting abilities.
  Strong communication and interpersonal skills.
  
• Certifications:Red Hat certifications (e.g., RHCSA, RHCE) are required.
  

Key Responsibilities

1. Middleware Management

• Install, configure, and manage Red Hat Middleware products such as JBoss EAP, Fuse, and AMQ.
• Troubleshoot middleware issues and optimize performance.
• Collaborate with application teams to ensure seamless middleware integration and deployment.

2. DevOps Practices

• Promote and implement DevOps best practices, including CI/CD pipelines and infrastructure as code.
• Collaborate with cross-functional teams to streamline workflows and improve overall efficiency.

3. Incident Management

• Respond to incidents and outages, providing timely resolutions and root cause analyses.
• Participate in on-call rotations and provide after-hours support as required.

Qualifications

• Experience:3–5 years of hands-on experience with OpenShift, Ansible, and Red Hat Middleware.
  Strong understanding of containerization, virtualization, and cloud technologies.
  
• Technical Skills:Proficiency in scripting languages such as Python and Bash.
  Expertise in configuration management tools.
  Strong background in Linux administration and networking.
  
• Soft Skills:Excellent problem-solving and troubleshooting abilities.
  Strong communication and interpersonal skills.
  
• Certifications:Red Hat certifications (e.g., RHCSA, RHCE) are required.
  

Responsibilities:

• Assist Project Manager in monitoring and managing the day-to-day operations of project
• Liaise with consultants and /or sub-contractors on the project matters
• Attend meetings with owner/client/contractors/sub-cons on the project related matters
• Check drawings and raise technical queries to resolve the discrepancies in between drawings and as well as those arisen during the project execution
• Carry out in-progress inspection and joint inspection and to ensure that the works were executed to the required quality standard
• Update the project quality plan as and when appropriate
• Assist Project Manager on the tasks assigned

Requirements:

• Candidate must possess at least Bachelor's Degree/professional Degree in Engineering (Civil) or equivalent
• At least 5 year(s) of working experience in the related field is required for this position
• Preferably Seior Executive Specialized in Engineering- Civil/Construction/Structural or equivalent.

Responsibilities:

• Assist Project Manager in monitoring and managing the day-to-day operations of project
• Liaise with consultants and /or sub-contractors on the project matters
• Attend meetings with owner/client/contractors/sub-cons on the project related matters
• Check drawings and raise technical queries to resolve the discrepancies in between drawings and as well as those arisen during the project execution
• Carry out in-progress inspection and joint inspection and to ensure that the works were executed to the required quality standard
• Update the project quality plan as and when appropriate
• Assist Project Manager on the tasks assigned

Requirements:

• Candidate must possess at least Bachelor's Degree/professional Degree in Engineering (Civil) or equivalent
• At least 5 year(s) of working experience in the related field is required for this position
• Preferably Seior Executive Specialized in Engineering- Civil/Construction/Structural or equivalent.

Job Description:

· Overseeing the daily site activities and progress, planning, implementation and monitoring work schedules in accordance with the master and detailed work programmes.

· Coordinate with different departments concerning the site work activities.

· Work closely with sub-cons, highlight any work-related matters for team's discussion and solutions.

· Supervise works on-site for proper work execution and safety.

· Handle any engineering/technical issues.

· Prepare daily progress reporting and maintain records that are up to date.

Requirement:

· Minimum a Diploma / Degree in Civil Engineering or equivalent.

· Able to work independently with minimal supervision under tight schedule.

· Meticulous and good communication.

Responsiblities:

• Perform quality checks on structural, architectural and ensure that the design and construction works comply with all the relevant statutory acts, regulations and practices
• Conduct site inspections, supervise and check the works to ensure smooth progression and timely completion of quality works according to CONQUAS requirement
• Monitor the performance of the workers for all trades and ensure any defects are rectified
• Implement QA/QC procedures
• Ensure safety & compliance of work on site
• Monitor & coordinate project progress
• Control of materials, etc.

Requirements:

• Degree in Building / Civil Engineering or related discipline
• At least 3 years experience in relevant field
• Able to work in Jurong Island
• Good interpersonal and communication skills
• Mon to Sat (Ability to work beyond normal working hours)

Job Description

1) Supervise the work of sub-contractors and work closely with other site operations staff to meet the project schedule.
2) Ensure that works are executed in accordance to specifications.
3) Coordinate with all M&E subcontractors to resolve all technical problems in order to achieve the desired overall project objective.
4) Work together with other project team members to coordinate/resolve technical issues.
5) Identify discrepancies between M&E, Structural, ID, Architectural and Client provisions.

Requirement

1) Minimum 3 years of experience as M&E Engineer in construction related field
2) Diploma/Degree in Mechanical or Electrical Engineering or degree in relevant subject.

Job Purpose

1. Overall in charge for all Planned Preventive Maintenance as well as Corrective

Maintenance works related to Track, Track Foundation, Trackbed and 3rd Rail System in

SMRT

2. Ensure all Line Maintenance works (PM & CM) are complied with approved quality

procedure, work instruction ( ISO 9002 Standard)

3. To achieve and maintain Key Performance Indicator set by Permanent Way Management.

Responsibilities

1. Responsible for all staff’s welfare, attendance, disciplinary matters, safety and maintenance

work matters.

2. To submit weekly maintenance programme to LM.

3. To prepare monthly report on team man-hours

4. To upkeep and maintain the office.

5. To coordinate with Chief Controller on all fault reports and arrange for proper deployment

to execute the work.

6. To plan out all Correction & Preventive Maintenance works and ensure it is carried out

promptly and comply to approved quality procedure and WIs.

7. To check, compile Daily Work Record submit by staff.

8. To conduct and brief staff on Toolbox briefing

9. To carry out project implementation as and when assigned by supervisor.

10. To perform PIC & PM roles.

11. To attend to Emergency work when call by Supervisor.

12. To assist LM on Track Quality report by :

- Reviewing and verify patrol reports.

- Assist with fault card

- Monitor and priorities assessment of track defect and quality.

- Input work request into Pway CM list.

- Monitor & coordinate work done in Pway CM list.

Job Requirements

1. Higher NITEC / NITEC / NTC preferably in Mechanical Engineering.

2. Preferably 3 years relevant working experience in technical work. Fresh graduates are welcome to apply.

Skills

1. Ability to work under pressure.

2. Self-motivated, resourceful and organized.

3. Able to work independently.

4. Possess strong interpersonal & communication skills.

5. Ability to communicate effectively in English, and work safely in a team with reference to the respective

6. Risk Assessments.

7. Experienced and confident in managing contractors.

ENGIE Services Singapore is a leading provider of Integrated Facilities Management solutions (IFM), property management, operations and maintenance, specialized rail engineering works, sustainable solutions and FM Consultancy services. With strong presence in various counties across South East Asia, we operate across mission-critical industries - aviation, transportation, healthcare, education, government and commercial.

ENGIE understands the integrated role of facility management and the value of it can be expanded beyond the traditional approach. As a total FM, specialized engineering and sustainable real estate solutions service provider, ENGIE offers a comprehensive range of technical, digital and support services customisable to best suit your unique needs.

• Lead and manage a team of Technical Officers for all addition and alteration (A&A) and project works.
• Plan, organize, co-ordinate and implement A&A and project work timely and ensure compliance to all authority and client's requirement.
• Liaise with sub-contractor and vendor for quotation.
• Liaise with client's appointed officer on all issues related to the A&A and project work.
• Prepare drawings and involve in all feasible studies of all potential work with client and submit proposal.
• Provide technical guidance to all team members and client.
• Review and update all existing and new drawings as per changes.
• Assist and support the Facilities Manager in all areas.
• Any other ad-hoc duties as and when assigned by supervisor.

Requirements:

• Degree in Mechanical Engineering or any related discipline.
• Minimum 2 years of working experience in the related A&A field or facilities management industry.
• Good knowledge of ACMV.
• Good knowledge of Autocad.
• Independent with good communication skill.
• Has a good safety mindset and displays good WSH behaviour.

• Engineering Construction Company
• Competitive Benefits
• Candidates who have completed semiconductor projects will be preferred.

Our client is a Engineering and construction company that specializes designing and delivering mega and significant projects. They are looking for an experienced Senior Mechanical Engineer for their expanding business.

RESPONSIBILITIES

• Expertise in M&E systems, testing, commissioning, and familiarity with construction processes, project management, BIM, and Green Mark 2021 requirements.
• Manage engineering teams, coordinate with stakeholders, and oversee M&E aspects of construction projects.
• Strong analytical, problem-solving, and decision-making abilities for technical issue resolution and goal achievement.
• Knowledge of quality control, industry standards, and safety regulations to ensure compliance and maintain a safe work environment.
• Financial skills to assist in budgeting, reporting, and implementing cost-control measures

REQUIREMENTS

• Bachelor’s Degree in Mechanical or Electrical Engineering.
• Accumulated around 6 years of experience handling M&E Engineering ideally in semiconductor or construction projects

OTHER INFORMATION:

• Location: depending on Project
• Working hours: 5.5 Days
• Salary: To be Discussed based on experience (Salary will commensurate according to experience & qualifications).
• The Company strives to achieve employee satisfaction and provides conducive working environment, attractive incentives and remuneration to all staff.

How To Apply:

This position is an excellent opportunity for a dynamic individual. It comes with stimulating challenges that will mould your capabilities and reveal your potential.

Simply submit your application with your updated Resume in MS Word Format to David Sia Yi Sheng (EA Personnel Reg. No.: (R1875905), Achieve Career Consultant Pte Ltd EA Licence No. 05C3451) (BEP) by clicking the ‘Apply link’ /

or call your friendly Consultant, David, at 9271 7510 for a confidential discussion.

Please indicate the below information in your resume:

• Current & Expected Salary
• Reason(s) for leaving
• Notice Period / Availability to commence work

YOUR SUCCESS IS OUR ACHIEVEMENT!

Notice:

We would like to inform that only short-listed candidates will be notified. All applications will be treated with the strictest confidence.

By submitting any application or resume to us, you will be deemed to have read & agreed to the terms of our Privacy Policy, and consented to us collecting, using, retaining and disclosing your personal information to prospective employers for their consideration, and for our marketing EDMs which you may opt out by unsubscribing in the mailer. You may refer and access our website at https://www.achievegroup.asia/privacy-policy/ for more information.

Cessation of Collection of full NRIC Numbers:

In compliance with the Personal Data Protection Act and commitment to protect candidates’ personal data, Achieve Group will cease to collect, process or use full NRIC numbers during our screening and job application process.

Be independent in research of advanced speech and audio algorithms and the development or implementation of such algorithms for embedded systems.

• Experience or knowledge of acoustic tests measurements for data acquisition and be familiar with state-of-the-art testing equipment.
• Experience of conducting objective/subjective evaluation of various audio algorithms on speech enhancement, active noise control, binaural rendering.
• Extensive experience in signal processing, acoustic modelling, adaptive filtering, noise suppression, active noise cancellation, hearing through etc.
• Ability handling C, Python, and script codes for system modelling, simulation and system implementation.

Qualifications Requirement:

• PhD with relevant experience (fresh PhD graduates are welcome).
• Extensive knowledge in at least one of the areas including: signal processing applied to audio, active noise control, speech enhancement, adaptive filtering and microphone array signal processing.
• Solid mathematical background.
• Working knowledge of C/C++ and/or Matlab/Python scripting as well as DSP algorithm optimizations
• Highly Desired:
  • Expertise in AI applied to audio, with hands-on experience in at least one deep learning framework in Python
  • Hands on experience in DSP code optimization and deployment for embedded audio systems
  • Knowledge and expertise of earphone active noise cancellation/hear through algorithm design and tuning, measurements and etc.
  • Top-ranking and/or award receivers in world competition in speech/audio signal processing field

Interested candidate who wish to apply for this position, please click on APPLY NOW

EA License No.: 01C4394 | PERSOLKELLY Singapore Pte Ltd

EA Registration No.: R23117518 | Heah Sian Wei

By sending us your personal data and curriculum vitae (CV), you are deemed to consent to PERSOLKELLY Singapore Pte Ltd and its local and overseas subsidiaries and affiliates collecting, using and disclosing your personal data to prospective employers/companies based in any country for purposes of evaluating suitability for employment, conducting reference checks, administering employment related services, complying with Government’s COVID-19 health advisories and such other purposes stated in our privacy policy. Our full privacy policy is available at www.persolkelly.com.sg. If you wish to withdraw your consent, please drop us an email to let us know. Please feel free to contact us if you have any queries.

5 days work week

Transport pick up from Jurong East MRT and Outram Park MRT.

Job responsibilities include:

• Interpret applicable Legal, Singapore Standards, Code of Practice & other requirements and implement & provide directions for compliance.
• Develop, maintain and periodically test out emergency response, Organize & conduct CERT audit and other emergency response relevant drills.
• Liaise with local authorities for all EHS issues, Licence renewal and represent the RC/SICA and other relevant meetings.
• Manage all EHS incident and non-conformance investigations and track corrective and preventive actions to closure.
• Organize risk assessments, site inspections and industrial hygiene and environmental samplings as well as implement or direct risk reduction and control measures.
• Conduct and organize EHS audits, trainings, meetings and promotional programs to increase employee awareness and knowledge.
• Establishing EHS objectives & Targets and its management Programme for continual improvement.
• Contractor management on In-house & SDM (Shutdown Maintenance) activities.
• Should have strong awareness on Safety Case implementation as well as Mitigative Measures for Safety Critical Events (SCE) in Major Hazard Industries (MHI).
• Establish good communication with all level and function within the organization.
• Assist in the adhoc assignment or project assign by management.
• Spearhead continual improvement projects for HSE.
• Work with HSE department in organizing Annual Safety Campaign.

Requirements

• At least five years of primary experience handling safety responsibilities within HSE department.
• At least 3 years of working experience in the Manufacturing or Chemical plants. Preferably experienced in Jurong Island.
• Fair knowledge in chemical process and unit operations.
• The incumbent should be self-driven and possess qualities of collaborative working style.
• Possess at least a diploma.
• Must be a Registered WSH Officer with MOM and Fire Safety Manager (FSM) with SCDF.
• Good command of English (spoken and written).
• Well versed with Microsoft Office.
• Experience with ISO14001/ SS651(ISO45001) management systems.
• Knowledgeable in understanding and interpreting P&ID drawings.

► Semiconductor and Electronics industry.

► Work Location: Ang Mo Kio

► Working hours: 8.30am to 5.30pm, Monday to Fridays

► AWS + VB

Our Client is a well-established company in Singapore to serve the semiconductor and electronics industries both local and globally.

Responsibilities:

· Software Design, Development and Maintenance (Equipment PC-based Programming)

· System Implementation, Testing, Debugging and Documentation

· Analyze existing software and identify areas for modification and improvement

· Troubleshooting at customer’s site

Requirements:

· Degree in relevant discipline with 3 years of experience in software development in the automation industry

· Strong in equipment PC-based programming skills

· Experience in motion control and process control

· Experience in Vision System software development is an advantage

· Knowledge in SECS/GEM standards and implementation is preferred

· Strong troubleshooting and analytical skills

· Willingness to travel for business on short notice when necessary.

HOW TO APPLY:

Interested applicants, please click on “Apply Now” or email to submit your resume.

Kindly send your resume in MS Word format to:

[email protected]

We regret only shortlisted candidates will be notified.

By submitting any application or resume to us, you will be deemed to have agreed and consented to us collecting, using, retaining and disclosing your personal information to prospective employers for their consideration.

Stafflink Services Pte Ltd

EA Licence No.: 04C4294

EA Personnel: Chew Hong Huang

EA Personnel Reg. No.: R24124128

This role is to support global business processes across sales, factories and business unit organizations, with a focus on assembly pricing activities. We are looking for a resourceful teamplayer who is adept at utilizing and integrating data from multiple systems to put together pricing proposals. The candidate should be highly adaptable to changing business needs and possess strong analytical skills. This position is based at our Regional Singapore office.

Core Responsibilities

• Focus on OSAT pricing and costing activities for assembly packaging.
• Key responsibility for the initial 3 months will be on daily production price maintenance duties, and approving pricing issues in SAP
• Responsible on cost models preparation to provide cost estimates and manufacturing readiness inputs to business unit, engineering and factory.
• Respond timely to relevant pricing requests in RFQ systems through price benchmarking and profitability analysis.
• Oversee RFQ trend, win/loss effectiveness and RFQ cycle time efficiency
• Support critical meetings with internal cross functional teams on product costing
• Partner with Business Units, factories, and sales to assure integrated and profit maximizing approach.
• Adhoc analysis of various revenue related items

Job Specifications (Qualifications/Experience/Skills & Knowledge/Personal Qualities)

• BS degree in Engineering.
• Minimum 5 years of relevant experience in semiconductor industry.
• Knowledge in assembly packaging processes will be preferred.
• Familarity with SAP system.
• Advanced Excel skills and ability to manipulate large data set is a must.
• Strategic thinker with a proven ability to translate technical requirements/issues into the business context or vice versa.
• Excellent communication and presentation skills, both verbal and written
• Independent, able to multi-task, and collaborate with cross functional and cultural groups.

Interested applicants, please kindly email your update resume to [email protected]. We regret to inform that only shortlisted candidates will be notified.

An adventurer to explore and secure new business opportunities that drives business growth, foster strong customer relationships, and deliver solutions to solve customer pain points. The in-depth knowledge of engineering technology and the ability to understand customer needs are the key contributing factors to the business growth.

Responsibilities:

• Being proactive in identifying and developing new business opportunities via effective selection and categorisation of customers
• Practice effective account planning, preparation and reporting by ensuring concise and effective update of reports as required by management
• Demonstrate effective account management and development to establish a deep understanding of the customer’s business and their problems/concerns and priorities
• Achieve sales and GP budgets through product demonstration to customers
• Undertake effective up to date market trend, information analysis of situations and data and thus providing feedback to management team to drive continuous improvement
• Assessing and identifying opportunities to reduce commercial risk, and negotiating of appropriate contractual terms and conditions and obligations
• Collaborate with engineering team to keep tabs on post-sales feedback and support technical assistance to address customer concerns
• To drive revenue growth from existing customer and soliciting for good customer farming experience

Requirements:

• Diploma / Bachelor’s degree in any Engineering discipline
• 5 years of more with proven track sales records and technical understanding of how technical and product knowledge can be applied in practice with strong understanding of Pneumatic systems; motion and fluid control
• Hunter role and with a growth/entrepreneur mindset
• Equipped with strong problem-solving skills and a growth mindset to identify/address problem statement with appropriate solutions with the ability to convey information effectively
• Independent, self-starter, team player, eager learner, keen problem solver
• Own vehicle is required for frequent traveling
• Ability to work collaboratively in a team environment to promote team work and growth
• Possess strong sense of curiosity, able to grasp technical concept quickly with a willingness to continuously learn and grow

Please include the following information in your resume.

• Current & Expected Salary
• Reason(s) for leaving
• Notice Period / Availability to commence work

By submitting any application or resume to us, you will be deemed to have agreed and consented to us disclosing your personal information to prospective employers for their consideration.

We regret only short-listed candidates will be notified.

EA License | 18C9251 WGT Group

Registration No | R1988835 Terence Tan

What you will do

• Build the web frontend product features. Write product features or system development code
• Apply technical knowledge and problem solving skills to build innovative solutions for complex workflows
• Strive for constant improvement in terms of code quality, maintainability, performance
• Participate in, or lead design reviews with peers and stakeholders to decide amongst available technologies
• Review code developed by other developers and provide feedback to ensure best practices (e.g., style guidelines, checking code in, accuracy, testability, and efficiency)
• Ensure engineering best practices, including writing comprehensive test cases are followed
• Contribute to existing documentation or educational content and adapt content based on product/program updates and user feedback
• Triage product or system issues and debug/track/resolve them by analyzing the sources of issues and the impact on hardware, network, or service operations and quality. Support engineering operations, including being on-call for production support when necessary
• Collaborate effectively with the team, while being a good communicator (both verbal and written)
• Document and share important aspects of all engineering decisions being made

What you’ll need

• Strong engineering skills and foundations, including problem solving, coding and debugging
• Expertise in core Javascript with at least 7 years of experience developing with it
• Proficient in Typescript, HTML5, and CSS3 usage in building large-scale applications
• Experience in browser (Google Chrome, Mozilla Firefox) plugin development is a plus
• Passion for building rich and innovative user experience
• Strong communication skills. Proactive in driving various initiatives and processes for the team as well as communicating with various stakeholders
• Bachelor's degree in Computer Science or related fields would be nice to have