Job Responsibilities

• Assist Shift Manager to ensure safe shift operation of the assigned plant and manage non-operating activities and co-ordination with internal and external stakeholders on operating requirements to facilitate the smooth operation of the power plants and in compliance with regulatory and company standards and requirements
• Become a pro-active member of the Station Team
• Support the SCE; PSCE and Operations Manager to meet the contractual, technical and commercial set-up and operation of the Power Station
• Input to and liaison with the relevant Managers for long term Station planning
• Assist to implement modern O&M practices, tools and techniques for safe, reliable and efficient Power Station operation and to fully utilise all Power Plant’s contractual energy, fuel and utility supply agreements
• Act as Senior Authorized Person (SAP) in preparing, reviewing and issuing PTW (Permit To Work)
• Able to support the team during plant emergency situations and abnormal conditions
• To assist operation team to comply with PSO/SPPG/NGCC requirements and procedures
• To support SCE/PSCE to ensure plant load output according to Trader dispatch schedule
• Assist to establish and implement mandatory O&M policies and procedures to meet all Station, company and legislative requirements
• Able to manage, monitoring and control the plant process operation from control room DCS
• Fully utilizing the CMMS to ensure all operation activities and experiences are recorded to comply with station, legislative and company policy requirements
• Assist to implement a Quality Management System as applied to the Power Station
• To assist fully with and help implement and manage all Health, Safety and Environmental practices
• To take part in training both on and off site, to be trained and to train others as required
• The post holder will be expected to comply with all company and legislative health requirements relevant to their duties and responsibilities
• To undertake additional duties and responsibilities as deemed necessary by the Operations Manager, PSCE and SCE
• Such other duties and responsibilities as may be reasonably requested by your immediate supervisor / the head of department from time to time

Job Requirements

• A Degree in Mechanical / Electrical / Control & Instrumentation Engineering preferred. Candidates with Diploma or NITEC qualifications with substantial experience in a similar role will be considered
• Minimum 6 years of Lead Technical Officer/ Operations Engineer ground experience in Power Station Operations on a CCPP
• Solid understanding, knowledge and experience of Combined Cycle Power Station operations
• Good understanding of Power Station commercial operation strategies in a deregulated electricity market and familiar with CCPP and Cogen performance analysis and optimisation
• General understanding of Power Station engineering design and construction is essential. Prior involvement in the technical and maintenance aspects of Gas Turbines and in the erection, commissioning and initial start-up phases of a modern Power Station will be valuable
• Strong safety mindset with detailed knowledge and experience in modern Health, Safety and Environmental practices
• Strong team-player with the ability to lead a specialist shift team and manage numerous personnel during critical plant outage periods

Inside Sales Engineering.

· Review customer RFQ applications/specifications and prepare technical proposals/responses.

· To generate quotations for all divisional products in response to customer RFQ’s.

· Maintaining accurate records of all quotation and contractual information.

· Entering Projects onto RSMS following quotation review and action the sales team as required.

· Review customer purchase orders against sales quotations to ensure that the information is complete, correct, concise and organised.

· Communicate with customers for the jobs associated with projects and bring them up to date as needed.

· Liaise with the operations manager and/or RSS Manager for any factory fit and/or site work needed for jobs related to projects.

· Work with the sales team to gather customer information required in order to complete a contract.

· Liaison with departments such as Purchasing, Production Planning, Engineering, Accounts, and Shipping ensuring fulfillment of the customer requirements.

· Participating in internal and external meetings with customers, inspectors, and expeditors.

· Assist with processing of sales order and other purchase order from time to time due to overload and staff absences.

· Co-operate with their manager to identify and implement best practices throughout the Company.

· Training other employees as needed from time to time.

· As required working within a project sales team to provide a coordinated effort to ensure the Rotork outcome.

· Perform other duties as assigned.

Job Description

Basic Qualifications:

• Bachelors/Degree in Computer Science or other technology field.
• Must have at least 3 years of professional production support experience in HA environment.
• Must be familiar with agile and DevSecOps principles and practices.
• Scripting experience with Windows PowerShell and Unix scripting.

Preferred Qualifications:

• 3+ years of experience with Java applications, SQL/NoSQL, Handling Production operations.
• Experience working with any log analysis tools and observability applications like Grafana, Tableau, Splunk.
• Experience with Linux and Windows administration, networking, security, and troubleshooting.
• Excellent communication, collaboration, and problem-solving skills
• Knowledge on Docker/Kubernetes, NginX, CDN, Caching
• Installing and Uninstalling various Windows and Unix/Linux applications and software experience

Job Scope and Duties include:

a) Monitoring of incoming emails and request for quotation and other administrative duties.

b) Study the Tender Documents to determine the Irrigation Scope of Works & Subsequently submit / respond to Tender Clarifications, Tender Addendums, etc.

c) Undertake Material Take-Offs and Bill of Quantities for the purpose of preparing proposals and tender submissions.

d) Drafting out the irrigated area using ACAD software, determine the water source, read the irrigation specification and outline the specific scope of works of each project.

e) Work out a preliminary irrigation design during proposal stage.

f) Prepare draft quotations including draft pricing based on standard rates.

g) Work together with Administration Staff to ensure all emails and quotation are addressed and sent out.

h) Follow-up on Tender corrigendum, addendums, clarifications and amend quotations if necessary.

i) Follow-up with Main Contractor’s QS during Tender Stage.

j) Assist the Project Management Team in claim submission and follow-up of regular payments.

k) Attend safety course, serve as a safety co-ordinator, prepare and submit safety submission and address all other site safety related issues.

l) Other duties as assigned by the company.

About Sleek

Sleek is on a mission to revolutionize how entrepreneurs operate their business. We want to give small business owners peace of mind and the power of online solutions to allow them to focus on what they do best - growing their business. As we work for our thousands of customers, we gather millions of data points about their business, and in turn we transform those into useful, actionable insights and recommendations to accelerate their growth through smart algorithms. 

We are a team of 440 builders from 18 countries, with offices in Singapore, Philippines, India, Vietnam, Hong Kong, Australia and the UK committed to delivering a delightful experience to our clients!

By submitting a job application, you confirm that you have read and agree to our Data Privacy Statement for Candidates. ​

We're looking for a proactive Senior Fullstack Engineer with a keen business acumen, capable of aligning technical solutions with the company's product and service goals. We're seeking a dynamic individual who not only excels in software development but also possesses a deep understanding of business concepts and can contribute to strategic decision-making. If you're passionate about leveraging technology to drive business success and thrive in a fast-paced startup environment, we want to hear from you!

Position Duties 

• Collaborate with product managers to uncover the secret desires of the stakeholders and translate them into technical wizardry
• Forge and sustain high-grade, scalable, and steadfast software with utmost care and artistry
• Design, develop and implement new features and applications that will astound and delight users
• Work closely with other engineers and stakeholders to ensure that projects are completed with the grace of a swan and the strength of a bear
• Be a master craftsman at code reviews and ensuring code quality and maintainability
• Ensure that the applications are secure, scalable and maintainable, with the same vigilance and care as a watchful protector
• Nurture and cultivate junior engineers through technical guidance and mentorship as you would innocent seedlings
• Constantly elevate the development process by discovering and incorporating the most advanced and visionary methodologies

• Been a Fullstack engineer or similar roles with 8+ years of experience
• Proficiency with VueJS and NodeJS (Typescript)
• Proficiency with MongoDB and creation of indexes using ESR
• Coded microservices that are modular and reusable
• Understand Clean/Hexagonal architecture, SOLID principles, ACID, Idempotency
• Strong advocate for quality; unit test coverage, security bug fixes, proper documentation
• Strong interpersonal skills and ability to communicate with Agile teams
• Knowledge of cloud architecture (AWS, GCP) and when to use serverless/PaaS
• Experience building and deploying microservices to Kubernetes
• Ability to work independently and collaboratively in a team environment
• Always learning!

At Sleek, we work in a fast-paced start-up environment. We have a strong culture built around our five core values: Simplicity, Loyalty, Excellence, Entrepreneurship, Kindness.  As a deliberately multicultural team, our team comprises more than 18 nationalities and spoken languages.

We consider the company’s success to be a result of committed individual and team efforts, and are looking to onboard talented and creative people who want to make a difference. Corporate social responsibility is a passion, and as an equal opportunity employer we aim at making the world a better place.  We are the 1st international incorporation and accounting brand to achieve B Corp certification status, meeting the highest standards of social and environmental impact performance. With a strong commitment to also make Sleek a great place to work, we offer a flexible working environment where we empower every team member to be the best they can be - regardless of race, ethnicity, religion, gender, age or identity.

If you think you would be a good fit for our mission, we look forward to hearing from you!

The Infrastructure Reliability Engineering - Storage Services team provides 2nd level support to manage the day to day operations for Visa Inc’s storage environment. As a Storage Administrator, your primary responsibility will be to support, manage, and implement improvements to Visa’s global storage infrastructure based on ITIL change, incident and problem management process. This involves working with a 1st level and 2nd level global operations team with 24x7 follow-the-sun coverage. You will work closely with other infrastructure and application teams in supporting, managing and implementing improvements to Visa’s global infrastructure. The Infrastructure Reliability Engineering team is centered around hiring and developing diverse talents who are passionate about building and operating best-in-the-breed infrastructure through technology and innovation.

JOB SCOPE 

This is an individual contributor responsible for identifying and resolving issues of advanced complexity. This position is an intermediate professional level and requires sound execution and analytical abilities. This role works independently and receives minimal guidance.

 Responsibilities

• Troubleshoot and resolve complex 1st level storage related problems, coordinate resources where necessary and serve as escalation point to 1st level operational teams 
• Respond to and resolve storage issues within the timeframe of severity level agreements 
• Support all aspects of storage management process assuring requests, implementation, and problems are delivered as required with no impact to the global communications environment 
• Take initiative to proactively discover potential storage impacts 
• Develop solutions that utilize automation through scripting
• Participate in tasks related to change, incident and problem management
• Document, create and maintain operational run-books based from best practice and from knowledge/experience gained from day-to-day operations for continuous operational improvement.
• Deploy and document changes in accordance with problem and change management process
• Participate in managing projects introduced by engineering team assuring full implementation and documentation standards are adhered to. Complete the projects objectives within timelines 
• Communicate to both technical and non-technical audiences, resolution and root cause resulting from the outage or service interruption 
• Perform the most effective approach to restore, recover, or alter configurations, logical or physical, to maintain service integrity 
• Perform weekends shift duties on rotational basis.
• Participate in or lead problem resolution and root-cause analysis 

This is a hybrid position. Hybrid employees can alternate time between both remote and office. Employees in hybrid roles are expected to work from the office 2-3 set days a week (determined by leadership/site), with a general guidepost of being in the office 50% or more of the time based on business needs.

As an AI research intern, the candidate will work on developing AI methods, solutions towards robot-based automation for various internal projects. The candidate will assist in

• Development of various AI methods for wear & tear analysis for a given product
• Methods to utilize CAD / 3D data files for wear & tear impact projection over a period of time
• Development of various data pipelines to simulate the wear & tear propagation over a period of time

Roles & Responsibilities

Job Description

Overall Job Purpose

• The engineer is to act as Electrical Commissioning Lead (entire Electrical Systems Lead), manage all Electrical system commissioning from preparation phase to execution phase.
• During commissioning preparation phase, responsible to attend Supplier Kick Off meetings to roll out package related commissioning requirements, review of Supplier documents, review ITR assignment and provide inputs for commissioning schedule.
• Prepare and review system boundary, commissioning procedures and commissioning deliverables.
• Support Commissioning Manager and Commissioning Project Engineer in the preparation of required tools, utilities, first fills and others for the commissioning activities of Electrical systems.
• Electrical Commissioning Lead is responsible for successful and safe commissioning of their area / system following the commissioning strategy set by Commissioning Manager.
• At times may act as a responsible commissioning engineer (owner) for few major systems in the area
• Work closely with MC Coordinator, Commissioning Coordinator for timely completion of the ITRs, mechanical completion and commissioning completion.
• Supervise day-to-day electrical commissioning activities are complied with Company’s Standards and Procedures.
• Identify and integrate Safety, Quality requirements in the electrical commissioning activities to ensure safe operability and maintainability.
• Understands the Completions philosophy and Scope of Work by studying the applicable industry standards, Company standards, specifications and procedures.
• Manages electrical commissioning PTW, electrical commissioning engineers, assigned technicians, operations support, supplier support and CLASS witness to execute the approved commissioning procedure including performance standards verification successfully, sign off the test reports and support for the system dossiers completion until handover.
• Studies the complex Company’s standards, business, operations and practices as well as engineering work matters/systems/procedures/standards within the tight project schedule in order to develop commissioning deliverables.
• Applies effective communication in discussions with various disciplines and departments in order to clarify complex information which is required as input for commissioning deliverables.
• Is expected to work independently and lead electrical commissioning team in order to complete the work schedule and fulfill the project timelines.

Requirements

• Bachelor in Engineering (Electrical)
• 7 years and above of relevant working experience in FPSO commissioning.
• Analytical skills
• Taking ownership
• Communication skills (written & verbal)
• Teamwork
• Professionalism
• Awareness about business process

Responsibilities

• Project lead and manage the electrical scope of works within the project.
• Responsible for preparing project documents, developing budgets, meeting client requirements, implementing project procedures, and making sure the project is completed on time and within budget.
• Responsible for overseeing the design, installation, and supply of electrical systems.
• Draw up schedules, allocate time, resources, budget, working with the engineering team, construction team and client to ensure work is completed on time, to a high standard.
• Manage, expedite, and support consultants' and contractor document submittals, budgets and schedules.
• Serve as an interface between the Electrical Engineering Design team and construction team to facilitate execution of project.
• Liaise with customers/consultants/project managers concerning approval of plans and drawings, acceptance of work, progress of work, problem solving, etc.
• Attend site meetings and inspections, report regularly on progress and monitor project schedule.
• Responsible to handle projects independently
• Resolve any technical difficulties and other problems that may arise in site or project
• Testing and Commissioning of the completed installations with Customers/Consultants/Sub-Contractors Assisted with the development of new electrical engineering standards and maintained and improved existing standards and guidelines.
• Prepare electrical-related scope documents, exhibits, budgets, specifications, schedules, and Requests for Proposal (RFPs).
• Coordinated project construction with project and construction managers to resolve critical and time-sensitive construction-related electrical issues.

Requirements

• Bachelor’s degree in electrical engineering
• At least 5 years of experience as electrical project engineer
• Previous experience in electrical projects is crucial
• Knowledge of EPC/M work processes as well as familiarity with the various project phases and the scope/deliverables
• Strong organizational skills, technical knowledge of electrical systems in a process plant, leadership, strong computer skills, and time management.

Work Location; 61A Tuas Nexus Drive. Transport will be provided.

Job Descriptions:

• Lead and manage asisgned projects of existing or new customers
• Works independently as a contact point with customer, communicate effectively with customers and provide all neccessary services during the project phase
• Initiates, plans and monitors the project from launch through approval
• Lead and rally relevant resources from toolroom, production and QA to manage project activities Work closely with program leads to manage and report status of the tooling project by program
• Ensure proper handover of projects to production, including providing training to relevant parties if required
• Participate actively in Management initiatives to resolve critical issues, improve overall operational performance productivities etc
• Responsible for the coordination of activities and functions of specific tooling projects
• Work closely with internal tooling team members in preparing the specifications and schedules and tracking the status of mould fabrication and validation
• Conduct Team feasibility meeting, DFM (design for manufacturing) review meeting, mold flow analysis etc
• Manage project expenses like tooling, materials, other project expenses etc to meet budget
• Ensure material availability for testing
• Lead projects by rallying relevant resources from internal team for kick off meetings, design reviews, attending mould trials, mould trial reviews through closing of the project
• Arrange and manage the validation process and work with the team to prepare necessary documentation for submission of validation reports
• Review status of projects and budgets; manages schedules and prepares and shares status reports
• Perform proper documentation of project files

Requirements:

• Diploma in engineering or equivalent
• Minimum 2 years of relevant experience
• Strong project management and technical skills
• Knowledge of project management techniques and tools
• Familiar with the ISO 13485/ 9001/ 16949 standards and any special CSR and ensure documentation compliance
• Experience in healthcare/ medical products and or automotive products
• Demonstrated ability to work with external suppliers and guide them to meet delivery needs
• Experience in mould design, process engineering, tooling fabrication, project management, production, where the candidate has developed a well-rounded background and understanding of our business and the product litecycle will be a plus
• Proficiency in software (i.e., AutoCAD, UG, Pro-E, mould flow analysis,) would be highly desirable
• Proficiency in Microsoft office
• Proficiency in Unigraphics and other 3D and 2D CAD and software is a plus
• Presentable, well mannered and good communication skills

Responsibilities:

• Develop green marine solutions that reduces marine carbon footprint, in line with company business objectives.
• Hands on in setting up of test lab to enable development and testing.
• Perform PLC software and algorithm development for electrical propulsion solutions.
• Generate documentation of software architecture and logic flow, test procedures, quality control and any other necessary supporting documents.
• Participate and support commissioning of vessels with similar configurations.
• Troubleshoot and resolve any issues related to our delivered solutions that may arise during the vessel commissioning.
• Any other tasks as may be required by supervisor.

Requirements:

• Min engineering degree in relevant discipline
• Strong software development skills particularly in equipment controls
• Strong analytical and troubleshooting skills
• Hands on person
• Team player
• Good communicator and has no problem engaging with external parties
• Knowledge in power electronics, motor drives, marine propulsion systems is a plus
• Fresh graduates are welcomed

• Permanent position with various allowances
• 12 hours shift work
• MNC Chemical Manufacturing Company at Jurong Island with transport pickup 

Job Responsibilities

• Lead a group of Production Technicians in the safe and smooth running of the production.
• Assist the Process Engineer to conduct activities and projects to optimize operation during Shift to achieve operational and cost efficiency.
• Troubleshoot plant/equipment/quality issues and recommend countermeasures.
• Monitor and ensure plant equipment integrity and reliability.
• Assist the Process Engineer to support Shift operation by providing suitable operating conditions for stable plant operation and product quality control.

• Possess Degree in Chemical Engineering or its equivalent, experience in petroleum, chemical or polymer industries added advantage.
• Have knowledge of process control and troubleshooting, hands on knowledge of plant equipment and instrumentation.
• Essential prerequisites include good analytical and technical report writing skills, ability to be a team player with leadership, initiative, drive & commitment, able to take pressure and able to communicate well with others.

Kindly note that only shortlisted candidates will be notified.

Triton AI Pte Ltd

Registration Number: R23118389

EA: 21C0661

Roles & Responsibilities

• Receives guidance only on new assignment / objectives and special / complex features.
• Independent on regular nature of work, uses personal experience, and applies relevant company policies and procedures.
• Uses creativity, constructive thinking and Interprets / independent judgment to formulate results based on principles, personal experience. Develop unique solutions for complex issues.
• Anticipates potential problems, and proactively solves problems through creative thinking / using internal and external resources.
• This position is considered more seasoned, responsible and reliable in terms of knowledge, experience and decision making. Hence bigger responsibilities / accountability are expected. Participates in setting objectives for projects.
• Must not disclose the confidential technical / non-technical information to any unauthorized person / company / competitors. How are errors detected and what is possible impact of those errors.
• This position is considered more seasoned and chances for errors are minimal.
• Thru soundness of self judgment, discussions with section lead and department manager for key decisions, regular review process the work accuracy is maintained.
• Participate in Engineering Reviews and Engineering Validation Activities including but not limited to HAZID, HAZOP, Studies, Operability, Front Loading Commissioning in design, SCE’s and Performance standards in Commissioning Procedures.
• To independently review & develop various complex commissioning deliverables, analyze the documents and highlight the shortfalls through vigorous review process and address these shortfalls with the team.
• Develop Onshore and Offshore Commissioning Procedures for Instrumentation and Control Systems
• To support in developing project deliverables as per project & client requirement
• Prepare & Review of company development work methodology / procedures.
• Capable of managing demanding expectations of clients which may range from addressing gaps to unexpected work scope variations while ensuring conformance to the project, regulatory and contract requirements.
• Attend FAT and SAT depending on project requirements.
• Independently deals with regulatory authority, class, vendors and clients with regards to comments or queries on commissioning deliverables and develops technical/engineering solutions to the issues raised.
• Participates in meetings with the project team to review progress and addresses interface/implementation/execution issues where necessary based on the standard procedures, practices and lessons learnt from past projects to ensure that the project proceeds timely and smoothly
• Perform duties as per directives of reporting authority.
• Leads site execution team on performing pre-commissioning and commissioning activities planned for the Instrumentation & Control systems, managing the interfaces with Construction and Pre-Operations teams, ensuring adherence to yard and company PTW systems regarding all the Instrumentation & Control System Sow

Key Responsibilities:

• Analyse process/program specifications & translate specifications to program codes, conforming to program guidelines and programming best practices
• Make changes to configurable items, which include hardware, software, documentation, etc. It covers configuration management planning, configuration identification, configuration controls & audits
• Develop unit test package, execute tests & document test results to ensure the quality of the program
• Assist in the integration testing, system testing, User Acceptance Test (UAT) & implementation activities to fix the reported problems/bugs of the system to ensure the smooth execution of programs in the production environment
• Investigate all reported problems/errors & initiate amendments & testing so that the system can operate correctly & efficiently
• Prepare & maintain up-to-date system documentation.
• Analyse functional requirements to translate into application design using established design methodologies and guidelines

Requirements

• 5 years of working experience in developing and delivering application software
• Possess initiative and disposition with a strong commitment and orientation towards results and high quality standards
• Strong problem-solving skills and ability to think out of the box
• Team player with strong communication and interpersonal skills
• Diploma / Degree in Computer Science / Computer Engineering / Information Technology related field, or IT equivalent

Roles & Responsibilities

Job Description

Overall Job Purpose

• The engineer is to act as Electrical Commissioning Lead (entire Electrical Systems Lead), manage all Electrical system commissioning from preparation phase to execution phase.
• During commissioning preparation phase, responsible to attend Supplier Kick Off meetings to roll out package related commissioning requirements, review of Supplier documents, review ITR assignment and provide inputs for commissioning schedule.
• Prepare and review system boundary, commissioning procedures and commissioning deliverables.
• Support Commissioning Manager and Commissioning Project Engineer in the preparation of required tools, utilities, first fills and others for the commissioning activities of Electrical systems.
• Electrical Commissioning Lead is responsible for successful and safe commissioning of their area / system following the commissioning strategy set by Commissioning Manager.
• At times may act as a responsible commissioning engineer (owner) for few major systems in the area
• Work closely with MC Coordinator, Commissioning Coordinator for timely completion of the ITRs, mechanical completion and commissioning completion.
• Supervise day-to-day electrical commissioning activities are complied with Company’s Standards and Procedures.
• Identify and integrate Safety, Quality requirements in the electrical commissioning activities to ensure safe operability and maintainability.
• Understands the Completions philosophy and Scope of Work by studying the applicable industry standards, Company standards, specifications and procedures.
• Manages electrical commissioning PTW, electrical commissioning engineers, assigned technicians, operations support, supplier support and CLASS witness to execute the approved commissioning procedure including performance standards verification successfully, sign off the test reports and support for the system dossiers completion until handover.
• Studies the complex Company’s standards, business, operations and practices as well as engineering work matters/systems/procedures/standards within the tight project schedule in order to develop commissioning deliverables.
• Applies effective communication in discussions with various disciplines and departments in order to clarify complex information which is required as input for commissioning deliverables.
• Is expected to work independently and lead electrical commissioning team in order to complete the work schedule and fulfill the project timelines.

Requirements

• Bachelor in Engineering (Electrical)
• 7 years and above of relevant working experience in FPSO commissioning.
• Analytical skills
• Taking ownership
• Communication skills (written & verbal)
• Teamwork
• Professionalism
• Awareness about business process

Roles & Responsibilities

Duties:

• To support in developing project deliverables as per project & client requirement.
• Prepare responses to client queries.
• Prepare & Review of company development work methodology / procedures.
• Develop Supplier call out plan in consultation with commissioning leads and work closely with Supplier callout Coordinator to manage the supplier callout process during execution phase.
• Develop mobilization plan for discipline technicians following project execution plan.
• Develop required specification and Coordinate for set up of contract for commissioning support services i.e., Integrity Leak test / Oil flushing services, Technician Manpower supply, temporaries (Load Bank, Temp Generators, steam blow etc).
• Coordinating with Commissioning leads to preparing a list of temporary materials and testing equipment’s, tools, consumables and process procurement of such items.
• Coordinate with planner to create commissioning WBS codes/activities/duration within project schedule using system / sub-system definition.
• Input system interdependency (logic link) with in Project Schedule
• Input commissioning man hrs with in Project Schedule
• Integrate construction milestones, commissioning sequence, and project completion targets and provide master project schedule for use by site execution team.

Qualifications

• Bachelor's Degree in Engineering with 8 to 14 years' work experience (or) Master's Degree in Engineering with 6 to 12 years' work experience with minimum of 5 years' work experience in onshore/offshore Oil & Gas area or FPSO line(s). Also Diploma in Engineering with 11 to 17 years work experience (making the equivalent to degree) can also be considered
• Ability to define concepts of completion process.
• Experience in developing required technical specification and Coordinate for set up of contract for various support services required during commissioning i.e., Integrity Leak test / Oil flushing services, Technician Manpower supply, temporaries (Load Bank, Temp Generators, Steam blow etc).
• Has work experience in setting up an effective, objective oriented, and user-friendly commissioning execution plan / schedule for the successful Commissioning of any FPSO project
• Work experience within strict regulatory environments and aligning commissioning independence with engineering compliance and contractual requirements.
• Familiar in use of Software, Database systems related to System Completion, Project Management (MS Project / P6) and General computer literacy (MS office).

Responsibilities:

• Work closely with design engineers and architects to create and document detailed test plans for verifying the SoC design.
• Establish and manage the infrastructure and environment for automated verification of the SoC's architecture, functionality, and performance.
• Develop reusable testbenches, test cases using constrained-random and directed methods, and verification modules for both block and system levels.
• Create a regression strategy, methodology, and scripting tools, ensuring comprehensive function coverage and addressing verification gaps before design releases and tape-out.
• Collaborate with design engineers to troubleshoot and resolve simulation issues.
• Provide support to test engineers during post-silicon validation.
• Mentor and guide team members and junior engineers, aiming to enhance verification efficiency.​

Requirements:

• Master in Electrical Engineering or equivalent with 8 years of relevant working experience/ PhD in Electrical Engineering or equivalent with 3 years working experience.
• Extensive understanding of UVM/OVM, Semiformal Verification, assertion-based verification, and hardware-software co-verification methodology.
• Skilled in Verilog, SystemVerilog, Python, Perl, TCL, Shell scripting, C/C++, SystemC, and assembly coding for industry-standard ISAs.
• Familiar with MIPI, AMBA (APB/AHB/AXI) bus protocols, RISC-V/ARM, or DSP cores.
• Experience in verifying designs at RTL and post-P&R gate levels.

__________________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

KEY DUTIES AND RESPONSIBILITES:

• Lead a performing Engineering team covering of utilities, facilities, and warehouse for the manufacturing site.
• Achieve financial objectives through efficient utility operation, cost improvement actions and optimal cost options.
• Planning & execution of all new and retrofit projects related to utilities & facilities.
• Ensuring best available technologies are incorporated by design.
• Techno commercial evaluations of consultants, vendors, and contractors.
• Delivering the project within the budget and timeline approved.
• Responsible for relevant project costing and annual budget preparation related to engineering, facilities and EHS.
• Coordinating with statutory authorities for relevant approvals.
• Complying with operational and personnel standards, regulatory and statutory requirement to ensure efficient, reliable, and uninterrupted operation.
• Ensure smooth handing over of the project to end-users, coordinate and ensure deliverables as per plan.
• Ensure the site's facilities are kept to the highest standards for cGMP requirements, including Purified water system, HVAC system, EMS, BMS, Boilers, fire safety, security, pest control, cleaning services and waste removal.
• Responsible for utilities & Facilities equipment Operation, Maintenance, Calibration, spares management and drawings management.
• Responsible for development SOPs and quality standard for site with following of site QMS procedures.
• Ensure to meet required the regulatory requirements (e.g. HSA, FDA etc.) and keep site audit ready for all the time.
• Responsible for managing a team of vendors / contractors.
• To assist on any ah-hoc duties that been assigned / task by the immediate superior

REQUIREMENT

• To possess knowledge in either pharmaceutical utilities (Purified water, compressed air, technical gases, HVAC, etc) or process equipment (Compression, granulators, coaters, etc)
• Possess intermediate to advanced knowledge in a core engineering discipline, esp. in cleanroom environment.

EDUCATION & EXPERIENCE

• Degree or Diploma in Mechanical/ Electrical/ Electronics/ Chemical Engineering
• Minimum 5 years for Degree holders or 8 years for Diploma holders (Candidates with prior experience in a GMP environment will be preferred)

Position Overview:

We are seeking a skilled and experienced Electrical Design and Commissioning Engineer to join our dynamic team specializing in marine vessel electrical propulsion and energy management systems. The ideal candidate will have a strong background in electrical engineering, a deep understanding of marine systems, and a proven track record of designing and commissioning complex electrical systems for marine vessels. This role will involve working on cutting-edge technologies to enhance the performance, efficiency, and reliability of propulsion and control systems for various types of marine vessels.

Key Responsibilities:

1) Electrical Design:

• Collaborate with cross-functional teams to define electrical system requirements, specifications, and design criteria for marine vessel propulsion and control systems.
• Develop detailed electrical schematics, wiring diagrams, and layouts using industry-standard design tools.
• Select appropriate electrical components, equipment, and materials to ensure compliance with safety, regulatory, and performance standards.
• Design and implement control logic, automation, and monitoring systems for propulsion and manoeuvring.

2) Commissioning and Integration:

• Oversee the installation, integration, and testing of electrical systems on marine vessels during construction or retrofit projects.
• Conduct thorough testing, troubleshooting, and validation of electrical systems to ensure proper functionality and adherence to design specifications.
• Collaborate with shipyard personnel and subcontractors to ensure proper installation and alignment of propulsion and control components.
• Coordinate with project managers to establish commissioning schedules, manage resources, and ensure timely project completion.

3) System Optimization and Performance Enhancement:

• Analyse and evaluate the performance of propulsion and control systems, identifying opportunities for optimization, efficiency improvement, and performance enhancement.
• Work closely with the research and development team to implement innovative technologies and solutions to address emerging challenges in marine propulsion and control.

4) Documentation and Reporting:

• Create comprehensive technical documentation, including operation manuals, maintenance guides, and as-built drawings for electrical systems.
• Generate commissioning reports, test procedures, and status updates for internal teams, project stakeholders, and clients.

5) Regulatory Compliance and Safety:

• Ensure that all designed and commissioned electrical systems comply with relevant maritime regulations, industry standards, and safety guidelines.
• Collaborate with regulatory bodies and classification societies to obtain necessary approvals and certifications for electrical systems.

Job Requirements:

• Diploma or Bachelor's degree in Electrical Engineering or related field.
• Proven experience (5+ years) in electrical design and commissioning, preferably in marine propulsion and control systems.
• Proficiency in electrical design software (e.g., AutoCAD Electrical, EPLAN) and simulation tools.
• Strong knowledge of marine electrical systems, power distribution, propulsion methods, and control strategies.
• Familiarity with marine industry standards (e.g., ABS, DNV, IMO) and relevant regulations.
• Excellent problem-solving skills and ability to troubleshoot complex electrical issues.
• Effective communication skills for collaborating with multidisciplinary teams and presenting technical information to clients and stakeholders.
• Project management skills with the ability to manage priorities, timelines, and resources effectively.
• Willingness to travel to shipyards and vessels for commissioning activities.
• Willingness to travel overseas as required.
• Positive with a can-do attitude.

• Preparation of design report, calculation, drawings, specification, cost estimation and details/ schedules for projects.  
• Senior technical resource may serve as technical advisor for team. 
• Provides specialized technical input to studies and design for staff's specific area of expertise. 
• Develops study and design procedures to facilitate high quality cost effective work by others. 
• Participates in interdisciplinary review of project deliverables. 
• Develops construction cost estimates and estimates of technical efforts for projects. 
• Uses expertise in all steps of completing discipline component of PS&E package. 
• Performs quality control review of design calculations or drawings. 
• Prepares technical specification sections. 
• Provides input to the development of engineering budget and schedule to meet requirements. 

What you’ll do:

• Undertake design and study of civil infrastructure work of road work, Sewerage, permanent and temporary traffic, drainage and utilities
• Familiar with the latest authorities’ design codes, specifications and requirements as well as submission procedures
• Able to be the design lead communicating and liaise with client and authorities while managing the team members design deliverable of drawings and reports.
• Able to liaise and coordinates with other design discipline/departments as well as managing sub consultants in preparation of drawing and reports for submission
• Able to communicate with clients and approving agencies for purposes of obtaining design information, presenting design intent and options and expediting approvals
• Able to supervise the team and carry out independent review of submission document
• Senior technical resource may serve as technical advisor for team
•  Participates in interdisciplinary review of project deliverables.

What You’ll do:   

• • To lead, manage and prepare design reports, calculation, drawings, specification, cost estimation and details/ schedules for assigned projects.
  • Conduct electrical services site survey
  • Lead in the coordination with other disciplines in preparation of design deliveries
  • Produce and lead electrical design from concept to detail design
  • Assist Professional Engineer in liaison, preparation and follow up of Authority Submission.
  • Work closely with Clients / Architects/ Structural Engineers / Quantity Surveyors, etc.
  • Assist Project Director in up keeping the project ISO quality documentation and records.
  • Senior engineers must be able to lead projects and supervise a team of engineers / technicians.

JOB DESCRIPTION

· Discussion with system engineers on SoC architecture and feedback on optimization.

· Work on SoC integration; system block development, e.g., power management, clock/reset, system register, test control, PinMux, etc;

· Discussion with synthesis engineer and back-end engineer on design optimization.

· SoC DFT support;

· SoC verification plan and SoC verification support

JOB REQUIREMENTS

· Bachelor’s or Master’s Degree in Electronic Engineering with ASIC design experience.

· Knowledge of ASIC design flow

· Experience in RTL coding, RTL and gate-level debug

· Understanding of DFT, timing and power requirements

· Familiar with UNIX/ Linux environment and scripting

· Good communication and interpersonal skills

· Strong analytical and problem-solving skills

· Knowledge on mixed-signal design would be an advantage.

You will be part of an IT infrastructure Support Team managing mission critical high-tech biometrics devices at critical locations of significant national interest. You will be trained to manage, troubleshoot and maintain the operational availability of these devices and to remedy faults to prevent operational down-time.

As a IT Support Engineer, you will be responsible for the following :-

• Assist the project teams with setting up, installing, and configuring operating systems, applications, and peripheral devices for PCs/Workstations.
• Provide first level on-site IT support to end-users on a 24x7 rotational shift, including weekends and holidays.
• The successful applicants should be prepared to be deployed primarily at Woodlands Checkpoint. The successful applicant could be deployed to Tuas checkpoint in future on a rotational basis.
• Provide findings and timely status update to the Project Manager on major issues escalated by users.
• Perform daily health check and inventory check on system.
• Experience in installing, configuring, and troubleshooting PC/peripheral devices and providing application maintenance support is necessary.
• Hands-on experience in supporting end-users in a Windows (Windows clients) environment is required.

• Having prior exposure to IT operational environments is advantageous.
• A strong Team player with the ability to collaborate and willingness to support one another.
• Communicates well and has good interpersonal skills.
• independent and has ownership of his/her assigned tasks.
• Certification in Nitec, Higher Nitec or Diploma, ideally with a focus/specialization in IT.
• Have keen interest in IT Service Management
• Willing to work on rotations.

In the course of your tenure as IT Support Engineer, you will learn and acquire the following:

• Experience in installation, configuration, troubleshooting of biometrics devices as well as the maintenance of related software applications.
• Hands-on experience in supporting high-tech devices in Windows (Windows clients) environment/platform.
• Understanding of IT Service Management where SLAs (service-level agreements), KPIs (key-performance indicators) need to be managed and adhered to.
• Familiarity with the fundamental scope of work typically delivered in IT Support Services.
• Ability to work under time-sensitive situations.
• Career progression to Lead a team in providing IT Support Services.

Site Engineer Responsibilities:

• Organizing materials and ensuring sites are safe and clean.
• Preparing cost estimates and ensuring appropriate materials and tools are available.
• Providing technical advice and suggestions for improvement on particular projects.
• Diagnosing and troubleshooting equipment as required.
• Negotiating with suppliers and vendors to ensure the best contracts.
• Authorizing technical drawings and engineering plans.
• Drawing up work schedules and communicating any adjustments to crew members and clients.
• Gathering data, compiling reports and delivering presentations to relevant stakeholders.
• Delegating tasks and scheduling meetings and training sessions where required.
• Completing quality assurance and providing feedback to the team.

Site Engineer Requirements:

• Bachelor's degree in engineering, construction, or similar.
• A driver's license.
• Experience in a similar role.
• Additional certificates or licenses may be required.
• Sound knowledge of Engineering, construction, and design.
• Great leadership and organizational skills.
• Superb project management skills.
• Ability to apply logical and critical thinking skills to projects.
• Great written and verbal communication skills.
• A willingness to learn.