Introduction:

The Energetix Sustainability Suite is an Enterprise IoT platform using AI to integrate sensor data streams and intelligent controls to perform Energy Monitoring, optimise Lighting, Plug Loads and ACMV, manage Air Quality, Occupancy and Data Centre Infrastructure. Our customers have reduced energy consumption by up to 40%.

We are looking for a candidate passionate about reducing carbon emissions in the built environment through intelligent energy management.

Job Description:

• Overall responsible for all aspects of the project implementation lifecycle. Plan, coordinate, and execute IoT deployments to help digitalize the built environment, including the site assessments, installation and configuration of devices and sensors to monitor and optimize energy consumption. Collaborate with multidisciplinary teams, including software engineers, data analysts, and facility managers, to design and implement effective monitoring and control solutions. Provide field technical support and maintenance for projects, working closely with Helpdesk to troubleshoot and fix site related issues. Document project progress, findings, and recommendations for continuous improvement.
• Analyze and interpret data collected from IoT devices to generate actionable insights for clients and stakeholders and to feed AI engines. Provide technical support and training to clients and end-users on the operation and maintenance of IoT systems. Instrumentation / IoT Devices will include electrical meters, BTU meters, IAQ Sensors, Controllers and various types of sensors and controllers as well as interfacing with Building Management Systems and PLCs.
• Work closely with Account Managers, Consultants and Contractors to engage customers, drive understanding of our solutions, influence tender specifications, qualify and perform demos and POCs and Pilot projects.

Job Requirements:

• Degree or higher in Building, Civil/Mechanical/Electrical/Computer Engineering, Computer Science, Electronics or equivalent.
• At least 5 years of Engineering/IT experience, preferably in Building Services or Industrial Automation with good knowledge of automation, PLCs, SCADA, Building Management Systems, M&E systems, RTU devices and networking equipment.
• Good interpersonal and communication skills, passionate about technology, capable of working independently, and highly organized with strong attention to detail.
• Willing to travel within Singapore and Johor Malaysia.

Job Descriptions:

• Assist the Planning Manager during project execution
• Assist Planning manager in gathering information and data entry
• To check and verify subcontractors programme, project deliverables, site progress with project baseline.
• Preparation of progress reports for submission to client
• Gather site construction / installation progress information and prepare progress monitoring documents.
• Liaising with construction / Installation teams to develop weekly working programme.
• Any other assigned ad-hoc duties

Requirements:

• Degree in Civil Engineering or related.
• Minimum 3 years of experience in construction Industry
• Expertise in Microsoft Office (Excel, PowerPoint), knowledge in Project Management software Primavera is at an advantage.
• Good team player and able to work independently with minimal supervision
• Willing to work in Tuas and commit overtime as and when required

Description:

• Understand read of 3D drawing of equipment, piping system and pipe support
• Familiar with equipment layout drawing, detailed piping drawing and isometric drawing.
• Co-ordinate with process, civil & structural, electrical & instrumentation team, to understand the elevation & structural requirements.
• Develop MSRA for mechanical, piping construction works.
• Manage and supervisor workforce for construction works.
• Prepare the material list depicting all the materials, sizes, specification, special requirements, testing requirements to meet the design. This document shall be used as an input for procurement team.
• Review the documents & drawings of vendor supplied equipment, valves, and skids to verify the piping requirements are meet.
• Perform site inspection at vendor manufacturing unit to qualify & check vendor can supply the bulk requirement on demand.
• Assist project & engineering team for modification requirement during construction. Prepare as-built drawings after completion of construction and documents, as necessary.

Requirements:

• Degree in Mechanical Engineering,
• Minimum 3 year’s relevant experience in piping construction and developing process piping system.
• Good knowledge of GA drawings, ISO drawings,
• Knowledge & experience to work in oil & gas plant, chemical plant,
• Able to provide quick and effective technical solutions, to suit requirements at all stage of the project

RESPONSIBILITIES:

• Strong knowledge of cryptographic concepts, Hardware Security Module's, and key management.
• Hands-on experience in implementing and operating Thales SafeNet HSMs.
• Hands-on experience in designing and implementing key management solutions for enterprises.
• Knowledge of networking and network security concepts.
• Experience working on PKI / key management solutions.
• Programming knowledge in C / C++ (preferred), Java, .NET.
• Experience integrating cryptographic libraries and HSMs with applications.
• Understanding of Information Security Architecture and ecosystem technologies and concepts required like firewalls, monitoring tools, encryption, web proxies, and identity & access management.

REQUIREMENTS:

• Bachelor's degree in Computer Science, Cybersecurity, or a related field.
• Experience with Thales HSM or similar cryptographic solutions.
• Strong understanding of cryptographic algorithms and protocols.
• Familiarity with compliance standards (e.g., PCI-DSS, GDPR).
• Excellent problem-solving skills and attention to detail.

RESPONSIBILITIES:

• Post-sales activities of Cybersecurity or Network Performance Monitoring products
• Involve in Large-scale (Local & Regional) Project Implementation
• Provide on-site implementation services including testing, deployment & documentation
• Provide technical support in ensuring customer satisfaction
• Analyse and clarify customer queries though troubleshooting and researching existing
  knowledgebase articles/known issues
• Be on routine standby to support 24x7 maintenance support calls
• Requires the ability to communicate issues clearly and concisely

REQUIREMENTS:

• Bachelor's degree or Diploma in Cyber Security, Computer Science, Computer Engineering or related field
• At least 1-2 years relevant experience in IT industry providing network support and
  administration.
• Equip with knowledge & experience in networking such as routing and switching technology.
• Possess CCNA or CCSA certification.
• Able to work independently as well as in a team environment.
• Willing to work hard and eager to learn about new technologies.
• Polite and able to communicate well to the clients.
• Analytical and possess good troubleshooting skills.
• Willing to work extended hours and on standby duty.
• Excellent interpersonal and communication skills.
• Independent and motivated.

Mandatory Skills

Reports To

Project Manager

Job Overview

• To work with Application and Infrastructure Teams to Setup & Configure Infrastructure, Application in OCP

Responsibilities and Duties

• To coordinate in setting up Infrastructure and support Application Infra needs
• To work with Application team to Setup, Migrate, Test Applications from VMs to OCP

Qualifications

• Well versed and Experienced in Redhat Openshift (OCP) Development & Architecture
• Knowledge in Linux OS & MariaDB
• Experience in JAVA Development, Shell Scripting, DevOps
• 5 Years minimum professional experience and 3 Years minimum relevant experience
• Willing to work in shifts and in weekends
• Team player to work with multiple teams and teammates
• Ability to work independently and handle multiple concurrent initiatives
• Dynamic individual with thirst to learn
• Strong team player with excellent inter-personal skills
• Ability to meet deadlines with no compromise on the quality of the work product.

Responsibilities

• Work as Senior Tankage Design Engineers to execute the Tankage Design Engineering of

the Project which includes design of Fixed Roof Tank / Floating Roof Tank as per API 650,

Low Pressure Tank as per API 620, Spherical Tank and Bullets as per ASME Section VIII &

Cryogenic Double Wall Tanks as per API 620 & API 625.

• Preparation, Review & Checking of Tankage Design Documents such as Design Calculation

for Tank, Finite Element Analysis, Tank Data Sheets, Tankage Material specification,

Tankage Fabrication Drawings & ensure Compliance to API 650, API 620, API 625, ASME

Sec VIII, AP 2000 and all Applicable Codes & Standards.

• Prepare all Tankage documents in accordance with project specification. Maintain Design

integrity and quality within the Project Engineering Team

• Preparing Engineering schedule and Engineering man hours estimation to meet project

requirements.

• Coordination with PMC and Construction Coordination.

• Participates in discipline and inter-discipline design check and screening meetings for

compatibility, completeness and correctness in works.

• FEED & Pre-Bid works which involves Feasibility study & MTO estimation works.

• Preparation of Technical Specification for Works and Technical Bid Evaluation

• Technical assistance to construction activities and attending to Site Queries.

• Preparation of Foundation Loading Data.

• Generate 2D construction drawings and data sheet.

• Preparation of purchase requisition for tank accessories such as roof seal, roof drain system,

aluminium dome roof & etc. Preparing technical bid evaluation for item purchased.

Checking vendor’s calculation & construction drawings.

• Checking of construction drawings. Preparation of bill of material for purchasing.

• Preparation of technical queries to client base on design deviation.

• To be proactive in creating a safe working environment for everyone and ensuring that HSE

in-house rules are observed at all times.

• To consider HSE aspects when planning and carrying out tasks to eliminate and reduce

HSE hazards, aspects and risks.

• Any additional Adhoc related work

Qualification

Preferably Bachelor of Engineering (Mechanical)

Experience

Preferably Min. 10 years’ experience in oil and gas.

Software Requirements

• Autocad

• Good proficiency in MS Excel , MS word

Code Knowledge

• API 650/ API 620

• ASME Section VIII D1 & D2

• ASME Section II Part A & D

• ASTM

• NFPA

Responsibilities:

Prepare Electrical and Instrumentation design documents including:

• Lighting design and calculation.
• Preparation of lighting layout 2D and 3D drawings, Lighting circuit diagram.
• Earthing and Lightning Protection design and drafting of layout, section, and elevation drawings.
• Cable ladder, conduit, trunking, cable routing design. Preparation of 2D and 3D design drawings.
• Cable sizing calculation, prepare Electrical cable schedule
• Prepare material take off (MTO) for material purchase.
• Fire Alarm, CCTV, Card Access, Public Addressing system design, preparation of system schematic and Layout drawings 2D and 3D.
• Preparation of Instrument Location layout drawing
• Preparation of Junction box termination drawings, Instrument Loop diagram
• Preparation of instrument Hook up, typical installation details
• Preparation of instrument cable schedule

Design coordination with internal design disciplines such as Structure, mechanical, piping team for design interface issue

Attend 3D model review and coordination with internal discipline engineers to resolves clashes.

Attend site survey and provide design sketches such as cable routing, support installation details, etc.

Support project tender team for material take-off from client tender documents.

Attend factory inspection for E&I related material such as Fire alarm, CCTV, MCC, PLC system

Support construction site to raise material purchase request, evaluation vendor quotation, preparation of Material approval submission.

Support site testing & commissioning work such as fire alarm system, CCTV System, DCS loop check, etc.

Requirements:

• Minimum Diploma in Electrical or Electronics Engineering.
• 3~5 Year of relevant design experiences
• Fresh graduates are welcome to apply
• Minimum hands-on experience for using design software such as AutoCAD MEP (Electrical), AutoCAD Plant 3D, Navisworks Manage, DIALux.

ST Engineering is a global technology, defence and engineering group with offices across Asia, Europe, the Middle East and the U.S., serving customers in more than 100 countries. The Group uses technology and innovation to solve real-world problems and improve lives through its diverse portfolio of businesses across the aerospace, smart city, defence and public security segments. Headquartered in Singapore, ST Engineering ranks among the largest companies listed on the Singapore Exchange.

Join our Cyber Team

We are an industry leader in cybersecurity with over two decades of experience, we deliver a holistic suite of trusted cybersecurity solutions to empower cyber resilience for government and ministries, critical infrastructure, and commercial enterprises. Backed by our indigenous capabilities and deep domain expertise, we offer robust cyber-secure products and services in cryptography, cybersecurity engineering, digital authentication, SCADA protection, audit and compliance. We specialise in the design and build of security operations centres for cybersecurity professionals and provide managed security services to strengthen the cybersecurity posture of our government and enterprise customers.

We are seeking an experienced and highly motivated Embedded Engineer to join our dynamic engineering team. The ideal candidate will be responsible for designing, developing, testing, and maintaining embedded systems for a variety of applications. You will work closely with hardware and software teams to integrate solutions that meet our customer’s needs while ensuring high quality, reliability, and performance.

Job Description

• Design and develop embedded systems and applications based on customer requirements and project specifications.
• Write efficient, optimized code for embedded systems in languages such as C/C++ or assembly.
• Develop, implement, and test embedded software on various platforms (e.g., ARM, or microcontrollers).
• Debug and troubleshoot embedded systems using tools like oscilloscopes, logic analyzers, and in-circuit debuggers.
• Conduct system performance analysis and implement software optimizations to meet power, speed, and resource constraints.
• Create unit tests and integrate automated testing into development processes.
• Document and maintain clear code, designs, and specifications for embedded systems.
• Collaborate with cross-functional teams, including hardware engineers, software developers, and QA engineers, to deliver high-quality embedded products.
• Participate in code reviews, maintain version control using Git, and follow industry best practices for embedded development.
• Stay up to date with emerging embedded technologies and continuously improve the design and development process.

Requirements

• Experience in firmware development on embedded systems using C/C++ and/or assembly
• Knowledge and/or experience in embedded system such as Arm-Linux
• Knowledge and/or experience in porting codes (especially assembly language) from Intel-Linux to Arm-Linux
• Knowledge in information security or networking standards is an added advantage.
• Knowledge in secure boot for NXP i.MX solution is an added advantage.
• Strong problem-solving skills and ability to work independently as well as teams.
• Excellent communication and collaboration skills.
• Work Location: Jurong East

Find out more: https://www.stengg.com/cybersecurity

ST Engineering believes in fostering a culture where team members are encouraged to overcome challenges, explore new ideas, and work together to succeed. We value individuals who are determined to push beyond the boundaries, and have a thirst for knowledge, continuous learning, and self-improvement.

• Servicing experience on Marine and Offshore deck equipment.
• Intensive knowledge on hydraulic system troubleshooting.
• Hydraulic system modification.
• Knowledge on Low pressure system service and troubleshooting.
• Min knowledge on electical control system and fault finding.
• Service / Troublshoot / Repairing knowledge on marine and offshore cranes and winches.
• Communication / Report writting skills.
• Overseas travel on short notice.
• Attending ship repair meeting / apply permit / Preparation of shipyard entery documents.
• As a team leader.
• Participate in vessel dockings repair work at shipyards.
• Adhoc duties as assigned

Job Description

• Interpret contract specifications, standards, and designs for construction
• Organise and lead meetings for design and construction; monitor and manages budgets; writes reports; and carries out additional administrative duties associated with the projects that are allocated
• Oversee mechanical scope planning, consulting coordination, and document control, including tracking sample submissions and drawing approval status
• Coordinate, organise, and prepare method statements, job hazards analysis and other prerequisites documents for mechanical equipment installation at site
• Oversee mechanical scope such as piping and equipment fabrication and installation, communicate with clients and subcontractors regarding issues, and guarantee the highest levels of workmanship
• Provide the mechanical designers with technical guidance on requirements
• Organise and/or participate in subcontractor and consultant meetings

Requirements

• Min diploma in Mechanical Engineering or a related field
• Min 3 years of construction experience
• Proficient in English writing and speaking.
• Microsoft application (words, excel, ppt etc)

Responsibilities

• Assist Project Manager in project management, survey, managing site works, construction activities, monitor work schedules, update progress, planning and implementation in accordance to master work plan and scope of work within project budget.

• Provide guidance and supervision to contractors/ in-¬house workers in relation to Electrical/ Structured cabling works in accordance to proposal for site build for cabling infrastructure, installation quality, and adherence to site work safety requirements and to resolve technical issues.

• Prepare project submissions, tenders, system designs, installation drawing & coordination of all technical activities on assigned projects

• Participate in project meetings and resolving project issues

Requirements

• Candidates should possess at least a Nitec/Diploma in Electrical/ Engineering or its equivalent.

• At least 1-¬3 years Project Management and hands on working experience in Electrical and/or Structured Cabling.

• Able to read/write and speak English is a must.

• Able to work independently and/or work together in a team when needed.

• Able to multi¬task

• Have a strong sense of leadership, customer oriented and problem solving skills

• Proficient in Microsoft Office

• Have knowledge in IT infrastructure will be an advantage

Responsibilities and Duties

To coordinate in setting up Infrastructure and support Application Infra needs

Ensure Operating system, Middleware, Database performance ,Security /Bug fix patches , EOS and security (ISCD) compliance in accordance to the bank standards

Provides hands on technical expertise (SME) , senior level technical guidance to application team as necessary

Assist and respond promptly to incident, investigate and provide temporary/permanent resolution to incidents escalated with respect to Middleware/ Operating system/ database performance, capacity, resiliency , stability, replication and other key aspects

Researching and recommending solution that best meet business needs and enterprise operational requirements

Provide technical support to application development teams

Evaluate release of Middleware, Operating system, Database components and its tools to ensure entire environment is complaint with no/minimal impact

Knowledge in Kubernetes, Docker, Jenkins, DevOps, Other Container platforms

Knowledge in Linux OS, Wintel OS, MariaDB or Any Other databases

Knowledge in Networking (F5 GTM/LTM or any other SLB)

5 Years minimum professional experience and 3 Years minimum relevant experience

Experience in banking or financial services institutions preferred

Will need to work in shifts and in weekends

Team player to work with multiple teams and teammates

Kindly take note of the following details for shift work

Transport is claimable - before 7am (for morning shift 6am to 3pm) , after 11pm (afternoon shift 2pm to 11pm)

Shift Timing

a. Morning shift 6am to 3pm

b. General shift 9am to 6pm.

c. Afternoon shift 2pm to 11pm

d. Night shift 10pm to 7am.

Need to support including night shift, weekends and public holidays

Responsibilities:

• Review specifications, clarifications, and drawings.
• Schedule works, requisition materials, control costs, and supervise projects.
• Coordinate with Structural, Architectural, and M&E teams to resolve issues.
• Ensure timely progress and compliance with safety and regulations.
• Conduct QA/QC and enforce safety on-site.
• Prepare progress and handover reports.
• Handle additional assigned tasks.

Requirements:

• Degree in Civil Engineering with PEB recognition.
• Working experience in A1/A2 building companies is preferred.

_______________________________________________________

HOW TO APPLY :

Interested candidates, please submit your resume by clicking on “Quick Apply” or contact [email protected] for more details.

Please provide following information in the resume for immediate processing

1) Reasons for leaving current and/or last employment

2) Last drawn and/or current salary

3) Expected salary

4) Date of availability and/or Notice Period

All applications will be treated in strictest confidence and only shortlisted candidates will be notified

Wee Wai Dan

EA License No : 03C5391

EA Reg No : R22109628

About The Role

Zero-Error Systems (ZES) is seeking a Product Engineer to join our team and help us revolutionize the industry. As a Product Engineer, you will join a team of specialised engineers to design, verify, test, and operationalise our System-on-Module (SoM) products by using high-performance Field Programmable Gate Arrays (FPGA) SoC devices.

Key Responsibilities

• Work closely with the product development team, and be involved in the FPGA product development lifecycle including system design, IP development, testing, application-use case, and production
• Contribute to the full design methodology (from front-end to back-end) based on FPGA, including the design of customized circuits/Intellectual Properties (IPs)/systems and the configuration/programming of macro-IPs (e.g, ARM cores, and communication interfaces) within FPGA cores
• Create and review the test programs to support and validate the FPGA product development
• Support the FPGA design upgrade
• Maintain and provide good documentation for the FPGA product development
• Any other duties assigned

Key Requirements

• Degree holder (Electrical/Electronics/Computer) with minimum 2 years of relevant working experience in FPGA hardware such as Xilinx or Altera
• Good knowledge of Verilog register-transfer-logic design and hardware functional verification concepts/test methodology is desirable.
• Hands-on experience in FPGA development tools such as AMD/Xilinx VivadoExperience in digital design and embedded software development using FPGA will have added advantage.
• Comfortable in Linux environment, and programming skills/experience in C/C++ are preferred.
• Good problem solving and failure analysis skills
• Good team player and results-oriented
• Excellent communication skills

Measures of Performance

• FPGA Platform - Setup/Installation/Maintenance of an FPGA platform to support the product development
• Hardware/Software Validation - Together with the team, qualify/quantity the performance/functional of the FPGA products, including Hardware/Software co-design
• Product Demonstration - Together with the team, demonstrate the application use-case for the FPGA products

For interested candidates, please forward your resume to ZES HR at [email protected]

Your Job

You will be responsible for the design and development of new high-speed custom automation electrical control systems, machine software, and user interfaces. Your creativity is key to producing easy-to-operate, safe, on-time equipment that will give Molex a competitive advantage in the marketplace.

Our Team

You will be working closely with Mass Production, Quality, Product Design, Automation Mechanical Design, and Machine Build Teams. This collaborative environment ensures that all aspects of automation and manufacturing are seamlessly integrated and optimized.

What You Will Do

• Provides controls feasibility and equipment cost estimates to automation development team.
• Works with mechanical engineering department to determine design complete dates. Prioritizes work to fulfill deadlines.
• Specifies Control Hardware and generates Bills of Material, Designs Control Panels and Enclosures, Creates Electrical & Pnuematic Schematics.
• Assists in executing the machine debug, qualification, and installation
• Provides technical support for the launch of equipment produced by the LR-Automation Team. Responsibilities will include traveling to mass production facilities for machine install & qualification, training of technicians and operators to ensure the proper and safe operation of equipment and supports any software changes in the field.
• Attends Design Reviews and PFMEA’s while working with mechanical engineers to improve current and future designs of automation.
• Tracks projects using internal methods for summarizing component cost, labor, and leadtime. Develops accurate, up-to-date BOM’s and Spare Parts Lists
• Understands, supports, and contributes to complete projects according to internal product development procedures, TQM and IS/QS-9000 requirements. Embraces Six Sigma, International Standards Organization (ISO) and Environmental, and/or Health and Safety (EH&S) Management Systems by following stated policies and procedures.
• Performs other related duties as assigned by management.
• International Travel: Up to 20% per year.

Who You Are (Basic Qualifications)

• Associate's degree in Electrical Engineering or Electrical Engineering Technology.
• 3+ years of Control Panel Design & PLC Programming experience.
• 2+ years of Project Management experience.
• Proficiency in Yaskawa NON-IEC PLC Programming Language.
• Experience in generating industrial electrical schematics, including safety guarding standards.
• Expertise in the design and documentation of machine controls.
• Strong computer skills and the ability to read and interpret electrical and pneumatic drawings.

What Will Put You Ahead

• Bachelor's degree in Electrical Engineering.
• HMI Programming experience (Redlion, Pro-Face).
• Experience with Vision Systems (Cognex or Keyence).
• Scheduling and budgeting experience.
• Design experience with electrical connectors or cable assemblies and/or automotive assemblies.
• Some PC language programming skills (.Net or C++).

At Koch companies, we are entrepreneurs. This means we openly challenge the status quo, find new ways to create value and get rewarded for our individual contributions. Any compensation range provided for a role is an estimate determined by available market data. The actual amount may be higher or lower than the range provided considering each candidate’s knowledge, skills, abilities, and geographic location. If you have questions, please speak to your recruiter about the flexibility and detail of our compensation philosophy.

Who We Are

As a Koch company, Molex is a leading supplier of connectors and interconnect components, driving innovation in electronics and supporting industries from automotive to health care and consumer to data communications. The thousands of innovators who work for Molex have made us a global electronics leader. Our experienced people, groundbreaking products and leading-edge technologies help us deliver a wider array of solutions to more markets than ever before.

At Koch, employees are empowered to do what they do best to make life better. Learn how our business philosophy helps employees unleash their potential while creating value for themselves and the company.

Additionally, everyone has individual work and personal needs. We seek to enable the best work environment that helps you and the business work together to produce superior results.

Your Job

As a Product Design Engineer specializing in IO connectors, your primary focus will be on supporting the development and manufacturing of new products. This will involve collaborating with manufacturing teams to review and provide feedback on the feasibility and plant capability of new concepts. You will also conduct analysis activities such as Proof of Concept (POC), Finite Element Analysis (FEA), and Tolerance Analysis to ensure product performance and integrity.

Our Team

You will be reporting to Manager, Product Design

What You Will Do

• Support of new Product Development and manufacturing for IO connectors.
• Review new concepts with manufacturing and provide feedback on feasibility and plant capability
• Support analysis activities such as POC, FEA and Tolerance Analysis
• Provide alternative solutions to resolve gaps in achieving target specifications
• Manage activities related to FOT, FSV and DVP&R testing
• Support existing product already in production or launching.
• Provide Engineering support of customer quality issues to ensure product reliability
• Provide Engineering support to plant for cost reductions and yield improvements
• Create Product Modifications and series expansions to increase market share
• Other duties as assigned by Management

Who You Are (Basic Qualifications)

• Bachelor’s degree in engineering
• 3 years mechanical product design experience with electronic products
• Experienced with product development process
• Understanding of Tolerance analysis, DFMEA, FEA
• Attention to details, be creative, good interpersonal skills to work effectively with internal cross functional teams and external customers
• Self-starter with confidence to initiate action independently

What Will Put You Ahead

• Bachelor’s degree in mechanical engineering and similar work experience
• From connector industries
• 5 years with specific high speed data connector design knowledge in the commercial or consumer space
• Knowledge of SMT design and signal integrity
• Strong mechanical aptitude and experience with clean sheet new product development component design
• Advanced tolerance stack understanding and risk mitigation skills
• Familiar with the component manufacturing environment, understanding of industry quality standards and requirements
• Basic knowledge on component design (injection, diecasting, sheet metal stamping)

At Koch companies, we are entrepreneurs. This means we openly challenge the status quo, find new ways to create value and get rewarded for our individual contributions. Any compensation range provided for a role is an estimate determined by available market data. The actual amount may be higher or lower than the range provided considering each candidate’s knowledge, skills, abilities, and geographic location. If you have questions, please speak to your recruiter about the flexibility and detail of our compensation philosophy.

Who We Are

As a Koch company, Molex is a leading supplier of connectors and interconnect components, driving innovation in electronics and supporting industries from automotive to health care and consumer to data communications. The thousands of innovators who work for Molex have made us a global electronics leader. Our experienced people, groundbreaking products and leading-edge technologies help us deliver a wider array of solutions to more markets than ever before.

At Koch, employees are empowered to do what they do best to make life better. Learn how our business philosophy helps employees unleash their potential while creating value for themselves and the company.

Additionally, everyone has individual work and personal needs. We seek to enable the best work environment that helps you and the business work together to produce superior results.

Mandatory Skills

Reports To

Project Manager

Job Overview

• To work with Application and Infrastructure Teams to Setup & Configure Infrastructure, Application in OCP

Responsibilities and Duties

• To coordinate in setting up Infrastructure and support Application Infra needs
• To work with Application team to Setup, Migrate, Test Applications from VMs to OCP

Qualifications

• Well versed and Experienced in Redhat Openshift (OCP) Development & Architecture
• Knowledge in Linux OS & MariaDB
• Experience in JAVA Development, Shell Scripting, DevOps
• 5 Years minimum professional experience and 3 Years minimum relevant experience
• Willing to work in shifts and in weekends
• Team player to work with multiple teams and teammates
• Ability to work independently and handle multiple concurrent initiatives
• Dynamic individual with thirst to learn
• Strong team player with excellent inter-personal skills
• Ability to meet deadlines with no compromise on the quality of the work product.

Job Description:

• Technical review on new project orders and order assignments to Technical Engineer & Drafter team.
• Ensure timely submission of engineering documents i.e. Control Schematic Drawing, General Assembly Drawing, Wiring Diagram, Nameplate Drawing, Test Procedure, Data Sheet etc.
• Review all project engineering documents before submitting them to client.
• Manage engineering change function and ensure engineering documents are updated accordingly.
• Provide advice and guidance to Technical Engineer & Drafter team for any technical queries and to support other ops team on various aspects of technical/engineering matters.
• To check and make recommendations based on common industrial engineering practice, where necessary.
• To provide and implement cost effective and best engineering solutions for project to stay competitive.
• To provide sound engineering practice and engineering calculation where applicable in a timely manner to meet project timeline.
• To review international standards and/or project specifications for product compliance. i.e. ISO 12490 / API 6DX / IOGP S-707 / SHELL DEP standards or other industrial standards related to Valve Automation and/or instrumentation.
• Providing field support for customers to resolve after-sales technical issues or technical clarifications.
• To attend internal/external kick off Meeting (KOM) when required.
• Travel with technicians to installation base and sites if the need arises.
• To assist manager to lead the department’s improvement programs and/or process efficiency initiatives.
• To assist manager in maintaining and updating the department's Standard Operating Procedures.
• To carry out Engineering personnel annual performance review to ensure competency and give counselling when required.
• Support new employee orientation by providing brief engineering department process flow training.
• Support Operations department in resolving aftermarket technical issues such as Product Design changes / Fault Finding / Supplier Discrepancies.
• Support development and upkeep of staff technical competency and training management.
• Performs additional related duties as requested or required.

Requirements:

• Bachelor’s Degree or Diploma in Mechanical/Instrumentation Engineering or equivalent.
• At least 6-8 years supervisory experience in Valve Automation and/or instrumentation background.
• Conversant with ISO 12490 / API 6DX / IOGP S-707 / SHELL DEP standards or other industrial standards related to Valve Automation and/or instrumentation.
• Possess a strong knowledge of pneumatic and hydraulic circuits.
• Must be able to read and interpret drawings, specifications, and technical documents.
• Knowledge of AutoCAD 2D/3D or drafting software & SAP will be an added advantage.
• Familiar and possess intermediate knowledge in Microsoft Office and Microsoft 365
• Very self-driven and able to drive the team.
• Possess strong interpersonal skills and can work as a team.
• Strong verbal and written communication skills

A Lead Automation/Systems Engineer at RoviSys will serve as a software or hardware lead on projects, as well as possess the ability to understand functional specifications and/or design specifications and translate that knowledge in the implementation of control systems. A lead engineer will be expected to develop skills required to successfully implement an entire project from both a control system software and hardware standpoint. A Lead Engineer will act as a mentor to Engineers and support training plans for Engineers.

Description of work:

• Consult with clients on digital transformation strategies within their facilities.
• Work in a team environment with engineers and designers from RoviSys, partners and clients to provide state of the art Control system to improve efficiency, product quality and profitability of process manufacturing.
• Design Electrical panels, Control Architecture and wiring drawings.
• Development of P&ID documentation for process clients.
• Define and implement programmable logic controller (PLC)/ladder design, distributed control system (DCS) configuration to meet client needs.
• Testing and on-site commissioning of control systems.
• Support of process control clients at sites in Singapore and aboard.
• Will lead team of engineers and technicians to provide control system solutions for clients.
• Will have opportunities to manage small-scale project of 1-3 people.

Control Systems Knowledge:

• Industry 4.0 applications.
• Electrical design and Process Control fundamentals.
• Familiarity with Controllers, such as single loop control, PLC, DCS or PC based control.
• IOT devices, communications protocols and connectivity.
• Exposure to Control Theory and some process understanding is helpful but not required.
• Platforms: Microsoft Windows XP/Vista/7, Rockwell Automation, Siemens, Emerson DeltaV, etc.
• Process understanding of batch or continuous process control, combustion control, etc.
• Awareness of process safety, validation and good documentation practices.
• Programming languages: PLC ladder Logic, Function Block, SFC VB, etc.
• Third-party HMI/SCADA Software, i.e. Intellution, WonderWare, OSIsoft, etc.
• Others: Network design/administration.

Qualifications:

• Self-motivated, excellent communication skills and enjoy working with people.
• B.S in Engineering, Physics and related fields.
• Min. 2 years as an Engineer with exposure to automation.

Job Summary:

• Seeking a Senior Marine Engineer with 8-15 years in marine engineering and automation.
• Expertise required in electrical control systems, automation design, and vessel performance optimization.
• Responsibilities include project management, technical troubleshooting, and cross-functional collaboration to meet timelines and project scope.

Key Responsibilities:

• Lead installation, testing, and commissioning of marine automation and electrical control systems.
• Design and optimize electrical schematics, PLC/HMI programming, and control panel design using AutoCAD.
• Oversee vessel performance monitoring and implement operational efficiency strategies.
• Conduct inspections, case studies, and system testing for data accuracy and system functionality.
• Ensure compliance with IMO, SOLAS, and STCW safety protocols.
• Liaise with clients and stakeholders for smooth project execution and issue resolution.
• Prepare and present progress reports documenting each project phase.
• Supervise technical teams, troubleshoot electrical systems, and ensure minimal downtime.
• Manage project documentation including schematics, termination drawings, and progress reports.
• Monitor compliance with industry standards, safety, and regulatory requirements.

Qualifications:

• Degree/Diploma in Marine Engineering or a related field.
• Certifications in AutoCAD, Industrial Automation, CompEx
• Proficiency in AutoCAD, Electrical CAD, PLC programming, and industrial communication protocols (e.g., Modbus, Ethernet).
• Strong project management skills and ability to manage multiple projects.
• Familiarity with MS Projects, CRM systems, and Gantt charts preferred.

Skills & Competencies:

• Marine Engineering & Automation: Expertise in shipboard automation, electrical systems design, and vessel performance optimization.
• Project Management: Proficient in planning, executing, and closing projects; skilled with project management tools.
• Technical Leadership: Capable of leading technical teams and stakeholders to meet timelines and budget.
• Data Acquisition & System Integration: Experienced in optimizing data acquisition and integrating control systems.
• Safety Compliance: Knowledge of maritime safety standards and regulatory compliance.
• Problem-Solving: Effective in troubleshooting and resolving complex technical issues

About Us:
Surbana Jurong Aviation is a premier aviation consultancy firm known for its expertise in aviation-built environment consulting services. With a dedicated team of professionals, we deliver high-quality aviation buildings, facilities, and infrastructure for clients worldwide. We seek a Junior Aviation Engineer/Planner to join our dynamic team.

Job Summary:
As a Junior Aviation Engineer/Planner, you will be vital in designing airport-related buildings, facilities, and infrastructure. The ideal candidate will have a background in civil engineering, proficiency with BIM, AutoCAD, and AviPLAN, and can create precise technical drawings for airside infrastructure and engineering works in airports.

Key Responsibilities:

• Develop and update drawings using AutoCAD.
• Design airfield geometry and markings using AviPLAN.
• Collaborate with planners, engineers, architects, and other professionals to ensure designs meet all project requirements.
• Prepare technical drawings, sketches, diagrams, and specifications.

Qualifications:

• Diploma or bachelor’s degree in civil engineering or related field, or equivalent experience in C&S CAD/BIM design and drawing production.
• Proficiency in AutoCAD; experience with Civil 3D, Revit and AviPLAN is a plus.
• Strong understanding of civil engineering principles, construction methods, and materials.
• Exceptional attention to detail and accuracy in design work.
• Ability to read and interpret technical drawings and specifications.
• Strong organizational skills, with the ability to handle multiple projects simultaneously.
• Excellent problem-solving, analytical, and communication skills.
• Team-oriented with a strong ability to work independently.
• Willingness to travel as required.

Job Responsibilities:

• Oversee C&S design progress against schedule and budget on projects.
• Manage the interfacing with M&E contractors
• Coordinate with engineering consultant, review and comment its design drawings
• Monitor the design progress and statutory submission against project baseline program
• Implement corrective measures for identified distractions or issues.
• Review, negotiate and recommend for approval/disapproval on design change orders.
• Administer design subcontract including processing monthly invoices for payment.
• Coordinate and monitor status of design incentive/disincentive programs complying with provisions of design subcontract.
• Perform constructive reviews conforming design to prime contract requirements and proposal commitments.
• Coordinate and control design submittals for owner’s review and approval.
• Lead a design team for overall C&S and architectural design works, assist QS team for material takeoff and tendering, manage subcontractors and support site construction works
• Facilitate resolving design issues with owner.

Job Requirements:

• Degree qualifications in Civil and Structural Engineering
• Preferably 2 years of relevant expereince in the planning and design of major waste to energy projects or similar major projects
• Positive working attitude and ability to work in a fast-paced environment
• Well versed with C&S software

Job duties and responsibilities:

• Design new products and continually improve existing products to meet industry standards and customer requirements.
• Develop technical manuals and Instruction Operating Manuals for products, ensuring accuracy and usability.
• Prepare, review, and verify design drawings, detailed specifications, and fabricated drawings for compliance with technical standards.
• Create Bills of Materials (BOMs) and ensure accurate documentation.
• Order materials and supplies; monitor the progress of fabrication and installation to ensure alignment with design specifications and schedules.
• Perform quality control checks to ensure the integrity of materials, components, and final products.
• Update and maintain design records, project databases, and documentation for traceability and reference.
• Track and coordinate the delivery of goods and materials to meet project timelines.
• Collaborate with cross-functional teams, including procurement, production, and project management, to address technical challenges.
• Provide technical support and guidance to the fabrication and installation teams during project execution.
• Identify opportunities for cost optimization, design innovation, and process improvement.

Job Requirements:

• Degree or Diploma in Mechanical, Precision, Tool, and Die Engineering, or a related field.
• At least 2 years of experience as a Design Engineer.
• Proficiency in drafting software such as AutoCAD, SolidWorks, 3D modeling software, or equivalent.
• Experience in Marine Hydraulic Applications, with knowledge of valves and actuators, as well as gear design (e.g., spur gear, planetary gear, bevel gear).
• Understanding of forging, casting, and precision CNC machining processes.

The position holder is responsible for checking the engineering datasheets of designers when required, assisting the production team, and E & I contractor(s) in technical clarifications and solutions to solve site problems, and assisting the commissioning team to solve E & I engineering problems

Key tasks:

• Carry out testing of all aspects of industrial generators, control panels, synchronizing panels, and fuel pump panels to ensure the product works to its specification.
• Setting up test bench and equipment includes load bank test on generators
• Able to read and understand electrical and mechanical drawings/layout
• Require to generate factory and site test report
• Troubleshoot and diagnose problems and minor repairs during testing and commissioning
• Aliasing with project engineers/managers to schedule and coordinate works to tight deadline
• Supervising and leading junior staff
• Ensure a safe work environment at all times
• Any other related activities or responsibilities as assigned by superior

Job Requirements:

• Min Nitec / Higher Nitec / Diploma in Electrical or Mechanical
• Min 1-year experience in a related field
• Knowledge of genset controllers/PLCs is an added advantage
• Good Knowledge and experience of generators will be considered engineer role
• Possess a valid Singapore class 3 driving license

Personal Competencies:

• Good interpersonal and communication skills
• Able to work as a team as well as individual under limited supervision

Job Highlights:

• Positive working environment
• 5 Days Work Week
• Attractive job package
• Flexible Work Arrangement (FWA)
• Age-Friendly Workplace Practices