The Site Engineer will be managing different parts of construction projects, supervising crew members, preparing estimates for time and material costs, completing quality assurance, observing health and safety standards, and compiling reports for different stakeholders. The Site Engineer should be able to work alongside various professionals and create work schedules that meet deadlines. The Site Engineer should demonstrate strong analytical and logical thinking skills, display a superb work ethic and thrive under pressure.

Required experience in bored pile works, diaphragm wall and deep soil mixing.

• Organizing materials and ensuring sites are safe and clean.
• Preparing cost estimates and ensuring appropriate materials and tools are available.
• Providing technical advice and suggestions for improvement on particular projects.
• Diagnosing and troubleshooting equipment as required.
• Negotiating with suppliers and vendors to ensure the best contracts.
• Authorizing technical drawings and engineering plans.
• Drawing up work schedules and communicating any adjustments to crew members and clients.
• Gathering data, compiling reports, and delivering presentations to relevant stakeholders.
• Delegating tasks and scheduling meetings and training sessions where required.
• Completing quality assurance and providing feedback to the team.
• Act as the main technical adviser on a construction site for subcontractors, craftspeople and operatives.
• Set out, level and survey the site.
• Check plans, drawings and quantities for accuracy of calculations.
• Ensure that all materials used and work performed are in accordance with the specifications.
• Oversee the selection and requisition of materials.
• Agree a price for materials and make cost-effective solutions and proposals for the intended project.
• Manage, monitor and interpret the contract design documents supplied by the client or architect.
• Liaise with any consultants, subcontractors, supervisors, planners, quantity surveyors and the general workforce involved in the project.
• Liaise with the local authority (where appropriate to the project) to ensure compliance with local construction regulations and by-laws.
• Communicate with clients and their representatives (architects, engineers and surveyors), including attending regular meetings to keep them informed of progress.
• Carry out day-to-day management of the site, including supervising and monitoring the site labour force and the work of any subcontractors - this is site-specific and may not be the case on all projects.
• Day-to-day management of the site, including supervising and monitoring the site labour force and the work of any subcontractors.
• Plan the work and efficiently organise the plant and site facilities in order to meet agreed deadlines.
• Oversee quality control and health and safety matters on site.
• Prepare reports as required.
• Resolve any unexpected technical difficulties and other problems that may arise.

Objectives:

· Supporting refurbishment projects within the Domestic Business Management Division.

· Support and execute business expansion plan.

· Overseeing engineering processes, ensuring technical standards are met

· Collaborating with cross-functional teams to deliver projects in a timely and cost-effective manner.

· To support refurbishment projects and business operations in the Singapore region.

· Ensure project quality, and act as a bridge between Japanese headquarters and local teams, fostering seamless communication and collaboration.

Job Responsibility:

1. Project Support:

- Plan, execute, and monitor refurbishment projects within the Capital Area.

- Assist in the execution of key projects, ensuring alignment with Japanese business standards and practices.

- Monitor project progress and report updates to stakeholders, ensure schedules effectively.

2. Technical Expertise:

- Provide technical input on refurbishment designs, materials, and processes.

- Conduct feasibility studies and risk assessments for refurbishment projects.

- Ensure adherence to industry standards, regulations, and safety protocols.

3. Collaboration and Communication:

- Work closely with internal teams, including procurement, operations, safety and quality assurance.

- Prepare and present progress reports, technical documents, and proposals in English and Japanese.

- Strong in Business Japanese communication and written skills to communicate with executives in Japan regional offices.

4. Administrative Duties:

- Handle documentation, reporting, and correspondence related to assigned projects.

- Coordinate meetings, schedules, and travel arrangements as necessary.

- Ensure all activities adhere to local regulations and company policies.

Requirements:

- A bachelor’s degree in business administration, Engineering, or a related field is typically required.

- Minimum of 3 years of experience in a business or engineering-related role.

- Strong communication and interpersonal skills.

- Ability to manage multiple tasks and projects effectively.

- Proficiency in Microsoft Office Suite (Word, Excel, PowerPoint).

Job Responsibilities

· Able to plan, implement and monitor work schedules for all worksites

· Ability to source for suppliers / subcontractors for smooth operation on site

· Independent & able to resolve any technical difficulties & problems that may arise on site

· Assist the Project Manager in the daily coordination, planning, and execution of the project plan at the site.

· Liaison with the relevant parties involved in the project work.

· Prepare site program chart for management review regularly

· Other related duties assigned by the company from time to time

Requirements

· Diploma/Degree with 1-2 years of relevant experience in Building construction

· Experience in Civil Engineering related fields is added advantage

· Possess good communication skills for effective follow-up

· Attention to details

· Ability to interact with all levels in a professional & responsive manner display maturity and ability to handle stress

· Willingness to learn and progress

· Enthusiastic team player

Job Title: Contract Execution Engineer

Job Description:
We are looking for a dynamic and results-driven Contract Execution Engineer to oversee the execution of contracts, negotiate vendor agreements aligned with the scope of work, and lead a team to ensure the timely and successful completion of projects. This role demands a professional with strong leadership skills, excellent negotiation abilities, and a focus on delivering quality outcomes.

Key Responsibilities:

1. Contract Execution:Execute contracts in accordance with agreed terms, conditions, and the defined scope of work.
   Monitor adherence to contractual obligations, ensuring compliance with company policies and industry regulations.
   Collaborate with internal teams to align project deliverables with contract requirements.
   Proactively address and resolve any issues or disputes that arise during the execution phase.
   
2. Vendor Negotiation:Negotiate terms with vendors and suppliers to finalize contracts that align with the project scope, budget, and timeline.
   Evaluate vendor proposals for technical, financial, and operational suitability.
   Build and maintain strong relationships with vendors to support project goals and future collaborations.
   
3. Team Supervision and Leadership:Lead, mentor, and supervise a multidisciplinary team to achieve project objectives.
   Delegate tasks effectively and ensure team members have the necessary resources and support.
   Foster a positive work environment that encourages collaboration, innovation, and accountability.
   
4. Project Management:Ensure projects are completed on time, within budget, and to the desired quality standards.
   Develop and monitor project schedules, identifying potential delays and implementing corrective actions.
   Track project progress, prepare status reports, and present updates to management.
   
5. Leadership and Problem-Solving:Exhibit strong leadership skills, motivating and guiding the team through challenges.
   Make informed decisions to resolve issues while balancing project goals and stakeholder expectations.
   Drive continuous improvement initiatives within the team and project workflows.
   
6. Qualifications:

• minimum O level with advanced certificate in work place safety and health, safety coordinator, other construction and process related safety certificates.
• Proven experience in contract management, vendor negotiations, and team leadership.
• Excellent leadership, organizational, and decision-making skills.
• Proficiency in project management tools and contract management software.

Job Description:

- Perform Civil, Structural Analysis and Design to meet project specifications

- Coordination and Liaise with Clients, Authority and Other Consultants, Contractors on Projects

- Ensuring Good Project Documentation and Submission to Authority and Clients

- Attend Project Meeting and Perform Inspections on Designed Works

- To Lead and Mentor Junior Engineer in Performing Engineering Task

- Reporting to Principal Engineer / Management

Job Requirements:

- Candidate must possess at least a Master's Degree /Bachelor's Degree / Post-Graduate Diploma / Professional Degree in Engineering (Civil/ Structural) or equivalent, recognized by Professional Engineering Board of Singapore

- At least 4 Year (s) of working experience in the related field is required for this position

- Good Working Attitude, Self-Motivated, Positive Thinking, Independent, Discipline, Attention to Details and Ownership of Tasks

- Familiar with Local Design Standard and Code

- Knowledge of Design Software, e.g., STAAD Pro, Plaxis, AutoCAD will be added advantage

• Working Days: 5 Days A Week (Monday – Friday), 8.30am to 5.30pm, Saturday may need work half day if work required (can claim OT)
• Office at 1 Coleman St, The Adelphi (City Hall), may need work at site
• Salary: $5000 to $7500

Requirements:

• Minimum of 5 years of relevant site / building construction experience.
• Need have experience in Civil & Structural

Responsibilities:

• To coordinate with consultants / subcontractors on the shop drawings / samples / method statements and keep all involved parties updated of the latest changes.
• To attend to project / technical meeting and resolve site issues with owner / consultants for the site progress to proceed smoothly.
• To verify the work done on site are in accordance with the approved drawings / specifications / authority’s requirement and ensured that the subcontractor carry out rectification for non-compliance.
• To resolve site issues with consultants / subcontractor / supplier ASAP to minimise delay to the construction progress.
• To ensure that the related documentations are updated and ready for ISO audit.
• To cooperate with the safety department and carry out the assigned duties within the safety framework.
• Assist site management team in project Planning & coordination.
• Plan and schedule work sequences for construction operation.
• Arrange and prepare documents for authorities’ submission for Conquers, RI, TOP etc.
• To study tender / construction drawings, specifications, and contracts to understand project requirements.
• Understanding of critical project criteria related to schedule & productivity.
• Able to provide guidance to new staff / junior staff.

If you are interested to apply, kindly WhatsApp me your updated resume in DOC file and allow our Consultant to match you with our Clients.

Whatsapp: +65 8525 2419

Email: [email protected]

Tan Man Ee (Ashley) Reg No: R22108289

The Supreme Hr Advisory Pte Ltd EA No: 14C7279

Responsibilities:

1. Mandatory Reporting & Compliance (ECA, WEMP, GHG, etc.)

• Prepare and submit Energy Management System (EnMS) reports.
• Ensure compliance with Minimum Energy Efficiency Standards (MEES) for water-cooled chilled water systems.
• Update and submit the Energy Efficiency Improvement Plan (EEIP) and Energy Reports as per regulatory requirements.
• Conduct annual energy reviews and support ISO50001 certification processes.
• Monitor and report water usage including recycling and reuse systems.
• Analyze GHG emissions data monthly and prepare yearly submissions for third-party verification.
• Report on Corporate Environmental Performance Management (CEPM) and align with Net Zero and Renewable Energy targets.

2. Corporate Environmental & Sustainability Initiatives:

• Track and report environmental indicators such as power, water, and waste consumption.
• Develop gap analyses and enhancement plans to improve eco-efficiency and recycling rates.
• Support corporate audits and sustainability projects, and environmental goal tracking.

3. Facility Monitoring & Data Management:

• Integrate facility monitoring systems into the Maintenance Management System (IFMS Dashboard).
• Develop automated preventive maintenance schedules and inventory tracking.
• Oversee daily monitoring logs and production support using SharePoint for data analysis and reporting.

Requirements:

• Degree in Environmental Science, Sustainability, Engineering, or a related Engineering field.
• Proven experience in Energy Management, Environmental Sustainability, and Corporate Responsibility reporting.
• Strong technical skills in data analysis, with proficiency in tools such as BMS, SharePoint, and digital metering systems.
• Excellent communication and reporting skills with attention to detail.
• Experience in maintenance management systems and facility monitoring tools.
• Knowledge of regulatory frameworks such as NEA and PUB compliance standards.
• Familiarity with ISO50001, GHG Protocol, and other sustainability frameworks will be an advantage.

Location: Central area

Position Overview:
This role is ideal for individuals who are passionate about designing and implementing technology solutions while providing technical support for smooth operations. As an Infrastructure Engineer, you will contribute to infrastructure planning, project execution, and end-user support to ensure seamless technology integration and customer satisfaction.

Key Responsibilities:

• Assist senior engineers in planning and designing technology schematics and infrastructure solutions.
• Develop detailed bills of materials and provide proactive recommendations for technology enhancements.
• Take full accountability for assigned projects, overseeing the installation, field deployment, and implementation phases through to completion.
• Maintain up-to-date project schedules and cost sheets, ensuring timely reporting of progress to senior staff.
• Provide technical and desktop support for end-users, ensuring system reliability and resolving issues effectively.
• Collaborate with customers to understand requirements and communicate solutions, fostering positive relationships.

Preferred Skills and Qualifications:

• Strong knowledge of Windows operating systems, endpoint security, and basic networking configuration.
• Familiarity with helpdesk systems and processes.
• Excellent communication skills to manage end-user interactions and articulate technical solutions.
• Capable of planning delivery timelines and coordinating with stakeholders effectively.
• Detail-oriented, with the ability to manage multiple tasks and meet deadlines.

To Apply, kindly click on the "APPLY NOW" button

We regret that only shortlisted candidates will be notified.

Staffking Pte Ltd (20C0358) | Chong Kar Ming (John) (R21101412)

Job Highlights
Career progression opportunities.

Guidance by Experience Professional Engineers and company Directors to develop holistic competencies.

Involve in company operational and management processes.

Job Description

• Civil & Structural Engineering Design.
• Fire safety, Pollution Control and Singapore Statutory requirements design.
• Project execution & management.
• Company level operational processes and management.

Responsibilities

• Civil & structural and other engineering design.
• Manage Engineering team.
• Manage or support design teams.
• Project co-ordination or management.
• Involve in company level operational and management processes.
• Assist Company Directors in the performance of their duties.

Job Requirements

• Registered Singapore Professional Engineer or
• Civil Engineering Degree that is registerable as a Singapore Professional Engineer preferred.
• Candidates with BIM knowledge/experiences will be an advantage.

Additional Requirements

• Good knowledge of engineering design and project management.
• Effective communicator and motivated.
• Have broad vision and good sense of reality.

Our esteemed client, an established MNC, is searching for a QA Assistant Engineer/Engineer:

Job Responsibilities:

• Inspect outgoing and incoming parts according to established procedures and specifications, including incoming process inspections.
• Maintain accurate quality records and manage quality-related data.
• Identify and escalate quality issues to the appropriate personnel for resolution.
• Ensure segregation of non-conforming products to prevent mixing with conforming products.
• Authorize rejection of parts that do not meet quality standards.
• Approve the release of conforming parts for storage and subsequent delivery.
• Conduct routine factory tests and inspections on completed switchboards.
• Perform testing and commissioning of switchboards on-site or on vessels, ensuring customer satisfaction, and address warranty claims or quality concerns.
• Conduct official tests on switchboards with surveyors, consultants, or customers as required.
• Support the manager in fulfilling quality responsibilities and achieving objectives.
• Maintain cleanliness and organization in the QA Department.
• Adhere to safety protocols during all tasks.
• Use calibrated instruments for inspections to ensure accuracy.
• Initiate actions to prevent product non-conformities.
• Propose and implement solutions for identified issues.
• Verify the effectiveness of implemented solutions.
• Control further processing or delivery of non-conforming products until issues are resolved.
• Undertake additional responsibilities as assigned by supervisors.
• Comply with the Quality Management System procedures for effective implementation and control.

Job Requirements:

• Diploma or Degree in Electrical Engineering.
• Prefer 2 to 3 years of QA experience in marine or industrial field.
• Experience in testing of switchboards/panels will be an advantage.
• Willing to work onboard the vessel and travel occasionally.

Additional Information:

• Salary: Up to SGD 3,500 +AWS +VB (2 Months)
• Working Location: Tuas Crescent
• Working Days: 5-day work week
• Working Hours: 8:15 am to 5:45 pm

For interested parties, kindly click on "APPLY NOW" or send in your resume in MS Word format to

[email protected]

*We regret that only shortlisted candidates will be notified*

TSTAR Recruit Pte Ltd| EA Licence No:22C1039| Co.Reg.No.202207088Z| EA Registration No.: R1767370 (SIA KAI SING)

Job Description

1. Perform site planning, coordination & inspection relating to the construction project so as to ensure that project completion timeline, requirements and budget are met.

2. Support Quantity Surveyors in conducting site measurement and inspections.

3. Able to plan / coordinate site works and resolve drawing details and discrepancies.

4. Any other tasks assigned by the management.

Requirement

1. Candidate must possess at least a Bachelor's Degree, Post Graduate Diploma, Professional Degree, Engineering (Civil/Structural) or equivalent.

2. Minimum 5 years construction experience with experience in civil construction industry.

3. Be able to work independently with minimum guidance and able to work within tight deadlines.

4. Bilingual in English and Mandarin is preferable

Interested applicants, please remember to include the following details for us to conduct a more effective job-matching for you:

1. Work experiences and job responsibilities

2. Current and Expected salary

3. Reason for leaving

4. Date of availability

5. Education background

6. Recent photo

Responsibilities:

Customer Service (60%)

• Represent OMEGA in dealing with customers’ concerns.
• To provide quality support to customers’ technical enquiries.
• To communicate with customers on his needs and request for service.
• To perform repair, installation and commissioning of Marine Communication and Navigational equipment.
• To troubleshoot complex technical faults, report findings and communicate with Projects, Sales and customers for solutions and feedback.
• Interact with end-users to explain the failure mode in detail.
• Travel to customer sites as circumstances dictate; 60-70% of the time will travel around the globe to attend to break downs & repair onboard vessels; otherwise in Singapore supporting the same activities.

Internal Liaison (25%)

• Assist the project team in project executions; in providing technical expertise in field/site works.
• Be responsible for the tools and parts issued under his care.
• To observe and implement the company EHS policy; ensure compliance with all safety policies, practices and procedures at all times.
• Able to meet project deadlines and prioritizing tasks time to time as scheduled.
• Any other duties assigned by immediate Superior.

Reporting (15%)

• To report the jobs carried out in the standard service report form; report the productivity hours and tasks performed.
• To summarize service reports per project for team for submission to the Manager, Service.
• To report on team’s achievements on a monthly and quarterly basis.

Requirements:

• Degree in Electrical & Electronic Engineering or equivalent.
• Min 4 year of relevant working experience.
• Basic knowledge on Network System.
• Good Knowledge on one or two of the following: telecommunication, public announcement systems, navigation systems.
• Service oriented with analytical and problem-solving skills.
• Willing to travel and staying overseas for a period of up to 4 weeks.
• Able to work independently and meet schedules.

• 5+ years of professional experience in QA / Testing and agile methodology
• Skilled in both Manual and Automation testing
• Tooling experience in SQL Server/DB2/SQL, SOAP UI, XML, JIRA knowledge
• Experience in Selenium, APPIUM, KATALON, TOSCA, API, WINDMILL is required
• Good team player, fast learner and good analytical skills
• Strong knowledge of software QA methodologies, tools and processes
• Hands-on experience with automated testing tools
• Experience with performance and/or security testing is a plus

The Team

Cundall’s Civil & Structural Engineering team pride ourselves on our exemplary track record of designing and leading innovative and sustainable built environment projects.

The Role

This is a good opportunity for an experienced Structural RTO to represent Cundall onsite for one of Singapore projects. This will be a 9-months contract based role commencing in April 2025 with an opportunity for extension if required by project. Location is based in the west of Singapore. The main responsibilities are:

• To coordinate and to supervise the whole construction works of the Contractor on site and to agree on the detailed programme of work.
• To check and ensure that all necessary instructions have been given to the Contractor and authorization from the Head Office has been obtained.
• To check and ensure that all materials are ordered and delivered to the site by the Contractor in good time with all necessary permits obtained.
• To ensure that the requirements of the specifications with regards to materials and workmanship are complied with by the Contractor.
• To ensure that all setting out work are properly carried out by the Contractor and to keep all survey records in systematic and legible manner.
• To keep a daily site record on the progress of the work and prepare site inspection reports.
• To issue such further instructions and clarifications of details as are deemed necessary.
• To check all works (rebars, formworks, steelworks etc) and to ensure they comply with drawings, specifications and good engineering practice.
• To ensure that relevant tests on materials are satisfactorily carried out and recorded prior to adoption and that all routine tests are done and documented during normal construction works.
• To attend site meetings.
• To assist the QS in the valuation of works done for the purpose of valuation of the progress of works and for the purpose of progress payment if required.
• To act as a channel for all claims and disputes and to provide the facts which are relevant.
• To familiarize himself with and where necessary bring to the notice of the Contractor, the need for inspections, certification etc. by the Client Department, municipal council, local or state or other authorities having jurisdiction over the project.
• To foster efficient organisation and good relations on the job and suggest and report on any matter likely to assist in achieving these. The RTO shall also observe and report on the general co-ordination, standard and progress of the works.
• After the completion of structural works by the Contractor, RTO shall verify that all constructed works are in accordance with approved authority drawings prior to authority inspections, and ensure that the finished works are free from defects and are functioning to its intended specifications.

The Skills

-Able to commit to the project commencing in April 2025.

-With minimum 6 years of site experience in the supervision of construction works (including both steelworks and reinforced concrete works).

-Must be an IES/ACES accredited Registered Resident Technical Officer.

-Given the collaborative and client focussed nature of this role, excellent communication skills and experience of using your initiative to overcome challenges are essential.

Roles & Responsibilities:· Assist Project Manager in monitoring and managing the day-to-day operation of projects· Analyzing technical drawings, interpreting specifications, and determining the electrical requirements of a given project.· Reviewing all engineering design plans to ensure compliance with project goals.· Attend meetings with owner/client/contractors/subcontractors on project related matters.· Ensure compliance with local codes, regulations, and safety standards· Check and raise technical queries to resolve the discrepancies between drawings as well as those arisen during project execution.· Ensuring health and safety codes are obeyed at all times.· Ensuring all deadlines and budgetary requirements are met.Job Requirement:· Diploma or Bachelor’s degree in electrical engineering or a similar field.· Minimum 5 years working experience in the related field within the built environment· Proficiency with CAD software and MS Office.· Excellent time management and diagnostic skills.· Strong communication and interpersonal skills

(a) Responsibilities:

The candidate is responsible for the end-to-end testing activities of an integrated e-payment system. The primary responsibilities would include carrying out the activities in the testing lifecycle including the test

planning, and analyzing business and system requirements.

The candidate will also be responsible for:

• Preparing the test environment, designing, and developing the test cases.

• Preparing the test environment, and executing the test procedures.

• Automating the test solution based on the system design using scripting or programming languages as well as performance tuning.

• Create traceability to requirements, analyze gaps and address them.

• Logging and tracking defects to closure

• Conducting test reviews with internal and external stakeholders.

• Perform root cause analysis for production and user acceptance defects, and address test gaps to ensure test efficiency.

• Develop design documents and user manuals that would effectively describe and provide clear instructions on the test automation solution to the end users including testers and stakeholders.

(b) Qualifications & Requirements:

• Tertiary qualification in Information Technology or Engineering

• At least 3 years’ relevant experience in executing testing and

developing test automation solutions involving devices (UI-based

or embedded) and/or back-office systems with familiarity on the full

system development lifecycle from requirement, development, to

testing and deployment;

• Good written and verbal communication skills;

• Able to work well both independently as well as in a team;

• Certification in software testing preferred;

• Experience in micropayments Fare Collection systems using Smart Cards and in diverse test execution phases (System Integration Testing, User Acceptance Testing, Performance testing) would be an advantage;

1. MUST HOLD ANY DIPLOMA OR DEGREE IN ANY MANNER IN A RECOGNISED UNIVERSITY/BOARD

2. MUST HAVE A MINIMUM OF 5 YEARS OF EXPERIENCE IN THE CONSTRUCTION SECTOR

3. MUST BE FLUENT IN ENGLISH.

4. SHOULD COOPERATE FOR OVERTIME WORKING IF NECESSARY

5. SHOULD FOLLOW SUPERIOR'S INSTRUCTION TIME TO TIME

6. SHOULD BE FAMILIAR WITH SINGAPORE ROAD ROOTS

7. SHOULD HAVE CLASS 3/3C DRIVING LICENCE

8. SHOULD OBEY THE COMPANY RULES AND REGULATIONS

9. SHOULD BE READY FOR LOADING AND UNLOADING

10 SHOULD BE ABLE TO HANDLE THE SITE INDEPENDENTLY

· Min. Diploma in Civil Engineering / Quantity Surveying

· Min. 2 Year Working Experience as QS in metalworks firm

· Experience in Taking Off Quantities for Metal Works including Site Measurement

· Experience in Preparing Progress Claim and Solving Claim Disputes

· Experience in preparing shop drawings for metal works

· Attractive Salary Package

Interested Applicants Please Email/Fax/Mail CV with Detailed Experience and Expected Salary to:

SDA Engineering & Trading Pte Ltd

33 Ubi Avenue 3, #06-37

Vertex Tower A

Singapore 408868

Fax : 6222 0943

Email : [email protected]

MODEL & STANDARD:

• Ensure BIM Team follows LCBC BIM Guide & Standards
• Ensure BIM Team follows the Project (specific) BEP on naming, linkview, folder & file structure
• Advise BIM Team on the best methedology for modelling

COORDINATION:

• Establish the Master Drawing List and shop drawing schedule submission
• Schedule work for the BIM Team
• Ensure BIM Team has the latest updated information to prepare the LC shop drawings
• Review and highlight any non-compliance issues with regulatory authorities’ requirements
• To ensure all subcontractors' shop drawings information are incorporated into LCBC shop drawings before submission for approval
• Track and monitor LC shop drawings submission statues and ensure approval are obtain for work to proceed on site
• Coordinate subcontractors' details to ensure workability
• Prepare weekly Clash Detection Reports
• Ensure resolution and model is update correctly
• Attend Technical and BIM Coordination Meetings
• Prepare Minutes of Meeting for BIM Coordination Meetings

REQUIREMENTS

• Degree/ Diploma in Architecture/Civil Engineering
• Minimum 10 years' relevant working experience
• Proficient in Revit / AECOsim / Navisworks
• Good understanding of other trades

Hiring with skillset below

• Ability to front and discuss projects with customers
• Design and Deployment of Infrastructure/Network/Security Solutions
  • Experience in deploying Checkpoint, Fortinet, etc..
  • Experience in deploying networks such as Citrix, F5, etc..
  • Implement VPN solution for secure remote access
• Network Security Management:
  • Handle network security for both on-premise and cloud environments (AWS, Azure, Google Cloud).
• Design and Solution Implementation:
  • Collaborate with network, storage, and application teams to design and implement secure network architectures.
  • Create and present technical solutions to management and business units for approval and implementation.

Skills For Success

• Degree in computer science/ Information Technology, Network Industry certification (e.g CCNA, CCNP) and Professional Security certification is highly desirable.
• 2-5 years of working experience in Corporate Network & Security.
• Experience and knowledge in area of Network, Firewalls, Security Load balancers, VPNs and Authentication Systems.
• Knowledge of LAN, WAN and Data Centre network & Security industry standards relevant to data communications / networking and computing.
• Knowledge of endpoint hardware will be advantageous.
• Knowledge on Security best practices and experience in Network solutioning, Operations and UAT.
• Provide timely project status updates.
• Experience in working with vendors on technology and services.

Rewards That Go Beyond

Ongoing training and development programs

Internal mobility opportunities

Your Career Growth Starts Here. Apply Now!

- Propose alternative design to substitute tender design that is practical, liable, cost-saving and conforms to relevant building code of practice.

- Liaise with client, architect, consultant, and main contractor for any site issues to ensure timely project execution. To represent the Company at site meetings and other meetings as required.

- Responsible for site coordination workers and to make accurate, decisive, and prompt decisions relating to work matters. Feedback to management on site problems for corrective actions to be taken.

- To ensure details in subcontracts, purchase orders are accurate and meet with the project specifications in covering the full scope of work intended and required by the main contract.

- Efficient project management which includes project scheduling, lead, and co-ordinate the whole project team which include supervisors, foreman, workers and subcontractors.

- Source for more competitive costs in equipment and subcontractor costs to minimize project cost and capital utilization.

- Responsible for preparation, checking and submission of shop drawings before commencement of installation works and as-built drawings upon completion. The drawings shall provide for the openings through building structures for the passage of M & E services and shall ensure conformance to regulation and clients’ requirements.

- Submission of monthly progress claim to clients and monitoring of variation works, avoid wide differential in claim and payment amounts. To finalize project accounts and variation claims early for client’s verification and payment.

- To monitor the progress of work on site and recommend, if appropriate, the interim payment certification to supplier/subcontractors proposed by the designated Project Engineer.

- To access, recommend and recruit suitable subcontractors and work force to provide quality engineering services to our clients.

- To be readily involved in tender estimation, variation quotation and costing preparation and assist the project manager in the preparation of budgetary statement.

- Responsible for all correspondences with the clients, authorities, main-contractors, subcontractors, vendors, architects, consultants, etc.

- To be actively involved with quality management system of the company.

- Perform any other duties as assigned by higher management or superior.

Job Requirements:

- Degree or Diploma holder in Mechanical Engineering or equivalent.

- Have more than 3 years or dible experiences in ACMV system.

- Proficient in Microsoft Office, AutoCAD and BIM.

- Independent, diligent, highly motivated with excellent team spirit and cope in a fast-paced environment.

- Strong analytical and problem-solving skills, with the ability to identify and resolve complex issues.

We regret that only the shortlisted candidates will be notified

Responsibilities

• Assist/support Topsides Engineering Project Manager in managing engineering work including engineering deliverables, man-hour and schedule control, mainly in multi-disciplinary topsides design related activities and to ensure work performed on the project is in accordance with company quality, systems and safety requirements;
• Understand the contract and scope of work for topsides with sub-contractor;
• Prepares key project documentation as per project specification requirements;
• Manages project topsides related drawings and controls technical documentation across disciplines;
• Prepares schedule, pre-planning and resource forecasting for engineering and other technical activities relating to the project topsides design, ensuring all activities are kept within the project budget;
• Assist topsides EPM in organizing regular inter-discipline review meetings and interface checks.
• Participates in project meeting, reports on the project status and attends to basic technical queries and issues including reviewing the performance of vendors/ subcontractors in the project
• Liaises with customers, topsides design sub-contractor, vendors, consultants and cross-functional team to coordinate project plan and handles technical issues in order to meet the project schedule
• Assist topsides EPM to ensure Design Reviews conducted with appropriate attendees and manage the action register to monitor the close-out of identified action items.
• Support topsides EPM in identifying dependencies and obtaining alignment with project stakeholders to ensure safety and quality are not sacrificed in the effort to meet the project schedule.
• Collates project documentation and database from the project for submission and retention, as required and compiles the records from current and past projects as lessons learnt
• Review & comment the activities & deliverables list from each discipline, mainly the topsides design related activities & deliverables;
• Lead & co-ordinate between Hull’s Team, topside lead designers from every discipline, external design house (when applicable) & client (when applicable) to define the boundary for each module and boundary between topside & hull;
• Co-ordinate between discipline to utilize the shared license based-on work priority;
• Monitor & control the topsides design manhours based-on the available budget allocated by commercial team or as defined by discipline Lead Designer;
• Record & follow-up all the topsides design pending issues / problems highlighted by Lead Designers from every discipline, and report to Topsides Engineering Manager;
• Expedite the information required by each discipline prior to start & complete the topsides design works;
• Monitor 3D model clashing issues with other discipline;
• Prepare Weekly Report related to Overall topsides design Progress, Area of Concern, Pending Items, Clashes Register, Interface Register, Down Time Register, Available Resources against Planned Resources, Manhour Usage against Planned Manhour, etc & Action Plan & submit to Topsides Engineering Manager/Engineering Project Manager & GM;
• Lead topsides design review activities either internally with other discipline or externally with other parties (include client);
• Initiate, organize, participate, record & file the minutes of meeting with external parties (include client) for topsides design related activities;
• Prepare, update & monitor the topsides design Punch List & Hold List on weekly basis, especially related to external parties (include client);
• Support Project Planner in preparation of monthly or weekly report to client related to topsides design progress & status;
• Support Topsides Engineering Manager/Engineering Project Manager & commercial team for VO related to topsides design;
• Responsible for ensuring that all topsides design activities meet work scope & comply with Project Quality Plan.
• Liaises with Construction & Commissioning Team to ensure topsides design activities are in-line with Area or System Completion Priority.
• Understand and monitor all interfaces with Class Society (if topside is classed) / other regulatory bodies and Clients to ensure requirements are properly addressed and relevant documents are reviewed timely.
• Assist topsides EPM in preparing project close-out, including as-built documentation and engineering close-out reports.
• Tack and coordinate changes with Discipline Leads ensuring team members follow the management of change process (MOC); ensure recorded changes are followed through.
• Proactively identify and monitor areas likely to change to reduce the “surprise” element, added costs and delays to project.
• Coordinate the interfaces with subcontractors and third party consultants and ensure all changes are captured through MOC process

Requirements

• Minimum Bachelor Degree in Engineering;
• Minzmum 10 years working experience in offshore oil and gas project managing topsides design works;
• Able to liaise with internal and external parties;
• Able to comprehend the strategies, work methods, processes and systems in overall project execution and engineering execution of topsides design;
• Highly competent interpersonal and influencing skills to tactfully and diplomatically manage ambiguity, conflict and uncertainty in a culturally diverse environment.
• High awareness of safe working practices associated with design, construction, mechanical completion, pre-commissioning and commissioning of an oil and gas facilities.

Our Addresses and Working Hours:

Seatrium (SG) Pte. Ltd.

Tuas Boulevard Yard

80 Tuas South Boulevard, Singapore 637051

(Islandwide transport provided)

Mon - Thu: 8:00am - 5:15pm

Fri: 8:00am - 4:30pm

Interested candidates are invited to send us an updated resume with your current and expected salary and earliest availability.

We regret that only shortlisted candidates will be notified.

Please note that your personal data disclosed to Seatrium Limited and our group of companies, shall be used for the purposes of evaluation, and processing in accordance with our recruitment processes and policies. By providing your personal data, you have consented to the aforesaid purpose under the provisions of the Personal Data Protection Act 2012.

Responsibilities:

• Take charge of all aspects of electrical engineering in the design of electrical power distribution system, switchboard, MCC and control

· Develop & review electrical related drawings, e.g. Single Line Diagram, MCC Schematic, Equipment layout, Cable ladder/tray routing layout

· Knowledge in Onshore/ Offshore standards (IEC, NEMA, IEEE & API)

· Prepare Electrical Load Analysis & List

· Familiar with Short-Circuit and Voltage Drop calculation

· Prepare & review Electrical MTO for projects

· Review Electrical equipment’s datasheet

· Strong knowledge in Low voltage MCC/Switchgear, UPS, VSD/VFD & Transformers

· Prepare specification for LV Switchgear, MCC, Transformers & VSD/VFD’s

• Reviewing of customers' specifications and drawings
• Define specifications and scope of work to contractors
• Execution of projects.
• Startup, testing, commissioning and troubleshooting of plants.
• Develop engineering capabilities and work with sales team on project proposal and bidding

Requirements:

• Degree in Electrical Engineering or equivalent recognized by Professional Engineers Board (PEB) Singapore
• Able to read & understand line diagram and generate Bill of Materials from single line diagram
• Knowledge on control, schematics, motor controls and materials take-off
• Proficient in AutoCAD, Microsoft Office
• Knowledge in Mitsubishi / Siemens / Schneider / Omron PLC software would be an added advantage
• Able to take on numerous challenging tasks while simultaneously meeting high standards and deadlines / vision
• Able to communicate effectively in English at all levels, both verbally and in written reports

An attractive remuneration package, benefits and challenging working environment and excellent career growth in the company would be offered to the successful candidate. We regret only shortlisted candidate will be notified.

Job Description

The candidate will be responsible for designing and drafting the electrical and instrumentals systems of Ships and Offshore Platform independently. The candidate will interact with Clients, Classification and Statutory bodies and Vendors in the process of design. Candidate to be able to prepare the following drawings independently:

• Electrical Load
• Single Line Diagram
• Short-Circuit Calculation
• Lighting Arrangement
• Transformer Load Analysis
• Cable Estimation

Desired Profile

• Min 5 years’ experience of which at least 3 years should be in Marine Design.
• He/She should be conversant with Ship electrical system and classification rules and IEE.
• Skills in Excel, Electrical design software and CAD-tools is required.

Requirements

• Degree in Electrical Engineering
• Excellent Communication Skills
• Conversant in Design of Electrical and Hybrid Propulsion systems, including batteries, battery charging systems etc.

Job Highlights:

• Working with world's leading company in SMT / PCB / semiconductor industries.
• Attractive salary package: AWS, variable bonuses, comprehensive medical coverage.
• Career growth opportunities with trainings provided.

About the Company:
Our client is a global technology company and a market leader that develops and provides leading-edge solutions in surface mount technology, equipment and materials for the semiconductor assembly and packaging industries.

Role Overview:
Join our client's dynamic team as a Software Engineer or Senior Software Engineer, where you will develop and manage cutting-edge solutions for SPI, factory line systems, and associated modules. The role demands technical expertise, creativity, and a strong focus on quality to deliver scalable and maintainable software solutions. Senior candidates will additionally lead complex design tasks, mentor junior engineers, and drive innovation in a competitive landscape.

Key Responsibilities:

• Design, develop, and maintain software solutions for SPI and factory line systems, focusing on quality and scalability.
• Provide effective solutions for production units and address customer requirements with a balance between functionality and time-to-market.
• Solve complex engineering problems using innovative approaches and technical analysis.
• Conduct technical reviews and provide evidence of appropriate solutions to customers.
• Stay updated on industry trends through continual professional development.
• Guide junior team members (for Senior roles) and support their growth.
• Perform any additional ad-hoc duties as assigned.

Requirements:

• Bachelor/Master Degree in Engineering or a related discipline.
• A minimum of 3–5 years of relevant working experience, depending on the role.
• Strong experience in software design, analysis, and validation of engineering requirements.
• Proficient in C++, UML, and the appropriate usage of design patterns.
• Familiarity with Source Control Systems, Visual Studio, and Software Development Lifecycle.
• Knowledge and experience in hardware systems, real-time control systems, Unit Testing, Dependency Injection, and WPF are advantageous.
• Demonstrated ability to balance functional design with time-to-market considerations while maintaining scalability and maintainability.
• Senior candidates should have experience mentoring junior engineers and leading complex software design tasks.

How to Apply:

Interested candidates, please submit your updated resume by using Apply button

**We regret to inform that only shortlisted candidates will be informed.**

Sarah Sevilla

Registration Number: R22107553

EA License No: 18C9027