Main duties:

- Service engineer is assigned to perform tests, maintenance, repair, inspections, fault-finding and troubleshooting of installed components of marine EGCS (exhaust gas cleaning systems).

Additional tasks:

- Service Engineer (when / if needed) may be assigned to support internal and external stakeholders by providing technical support and solutions and taking ownership of assigned support cases.

- Service Engineer (when / if needed) may be assigned after-hours on a rotating basis to assist customers with emergency cases (24/7 remote support).

Location:

- Manta Marine Service hub in Singapore as base, onboard of ships, at ports, anchorage and shipyards

- Other locations which may be needed occasionally.

Essential responsibilities and relevant key words:

- Perform preventive maintenance, repair, monitoring, inspections, tests, calibration, fault-finding, troubleshooting

- Perform basic software tasks in relation to attendances, such as uploading, downloading and fine-tuning the software

- Prepare required documents for completion of service trips and ensure that the documents are received by Office.

- Assist internal with evaluating and investigating incoming claims and developing scope of work prior to service or warranty repair attendances.

- Assist other Manta Marine engineers during installation, commissioning, and service missions.

- If assigned, hold training sessions for customer/crew members during service-related trips onboard the vessel to ensure that crew members maintain and operate the Manta systems/equipment properly.

- If assigned, perform Factory Acceptance Testing (FAT)

- Submit product improvement proposals to the concerned department and Service Manager in existing and future hardware or software to prevent the reoccurrence of a problem (failures, defects, anomalies, and malfunctions).

Maintain compliance with all company policies and procedures:

- Ensures that all activities, both supervisory and administrative tasks, at site agree with the governing laws, rules, standards, and existing policies of the company and at the field.

- Participate in all safety and security training that Manta provides.

- Develop and retain good customer relationship on field

- Convey feedback of customers from on-site and/or off-site activities to the Service Manager to address the situation for future, development and improvement.

- Perform other related duties as assigned by the manager.

Minimum Education and/or Work Experience Requirements:

Hard Skills:

- BSc degree or minimum 5 years relevant work experience in the shipping/marine/maritime industry

- Knowledge of proper safety procedures on board and recognition of hazards at sites (marine safety).

- Solid skills in marine electric, having experience and a good understanding of PLCs, network and communication between components.

- Sufficient computer proficiency in:

· MS Office 365 (Word, Excel, PowerPoint, Outlook, etc.).

· MS Dynamics (Case Management System).

- Driver’s license (vehicles)

Soft Skills:

- Excellent verbal and written communication skills in English, including the ability to effectively communicate with internal and external customers.

- Be able to work under pressure and meet deadlines, while maintaining a positive attitude and providing exemplary customer service. Be flexible whenever necessary.

- Ability to work in teams and independently, and carry out assignments to completion within parameters of given instructions, prescribed routines, and standard accepted practices

- being structured, handy, and can plan and organize the execution of service work.

- With short notice can travel abroad and leave your home for service trips.

Advantages:

- Knowledge and experience with SOx/NOx, function of components and whole system, including:

· PLC program changes/re-programming.

· VFD commissioning/re-programming.

· Setup of network communication systems. Configuration of switches, I/O, PLC, etc.

- First aid certificate

Main Duties:

● Assist Project Manager in the preparation of project Capex, budget estimation and cost allocation. Assist in monitoring the budget tracking and report to Project Manager.

● Preparation of procurement plans, schedule and tracking of project procurement progress.

● Assist in Preparation of technical specification, bill of materials, RFQ for purchase of equipment, components or services required for the project.

● Coordination with procurement regarding supply and vendor issues. May work with vendors on behalf of procurement.

● Assist in Preparation technical compilation and evaluation of vendors quotation.

● Preparation of documents required by the purchasing department to issue PO or matters related to purchasing and Facilitate the purchase order until PO issuance from the purchasing department.

● Prepare and monitor the procure items tracking and ensure getting periodic

updates/reports and on time delivery.

● Tracking of vendors / contractors claims, ensures that the claim quantity is accurate as per contract or PO.

● Tracking of Variation Orders (VO’s) and Coordinate with the procurement team regarding the change order.

● Lead the procurement meetings with vendors if needed.

● Prepares weekly or monthly procurement status reports by collecting, analyzing, and summarizing information and trends; recommending actions.

● Maintains product and company reputation by complying with state and company policy and regulations.

● Contributes to project team effort by accomplishing related results as needed.

● Able to work independently/ with minimum supervision.

● Willing to work late or during weekends when required.

Required Experience:

● Minimum of 2 yrs experience working in Semiconductor industries.

● Experience working at equipment and components procurement, coordination with vendors/suppliers OEM related to procurement or equivalent experience.

● With experience in giving inputs in purchasing technical specifications for equipment or components and good understanding of the tendering process and contract.

Required Skills:

● Proficiency in technical writings and good presentation skills.

● Proficient to read and understand engineering plan drawings and come up with procurement specifications Bill of material or Technical Specifications.

● Proficient with Google Workspace Platform (Google Sheet,Docs,Slides) application or equivalent.

● Familiar with Singapore and international codes /Regulations related piping, construction.

Qualifications:

● Minimum Graduate of Bachelor's degree in Mechanical, Civil, chemical or equivalent engineering education.

● Willing to work at various outdoor construction sites.

● Well versed in autocad drawings to draw P&ID and SLD. Able to understand the P&ID and draw as per process requirements.

PERFORMANCE GOALS

● Ontime project completion of given Scope of Works

● Deliver high quality output such as technical specifications or bill of materials.

● Contributes to project cost saving and efficiency.

● Contributes to safety to meet Zero (0) Major incidents and time lost.

Clarissa Loh Yu-Shen R1104558

Recruit Express Services Pte Ltd 13C6614

Job Description

1. Establish action plan for all sales promotions
2. Drive sales growth through maximization of resources and execution of market segment strategies
3. Secure active customer relation data management within the assigned area
4. Establish / Maintain campaign results report to track progress and impact of marketing initatives and take appropriate actions in case of deviation
5. Achieve sales target set by management in assigned area
6. Assist ASM in supporting channel partners technically
7. Provide market and competitor intelligence on monthly base
8. Monitor customer, competitor activity and gather general market information and feedback to headquarter.
9. Create and maintain strong customer relationship with top notch customer service.

Requirements

• Diploma/Degree in Mechanical / Electronics Engineering
• Minimum 5 years of sales experience in multi-national industrial environment, preferably with wire processing machines, and more than 3 years in sales management
• Good basic understanding in industrial machinery, automation and software
• Excellent communication, presentation, and negotiation skills
• Ability to work independently and as part of a team
• Willingness to travel overseas and visit clients (up to 30% of time)
• Singaporeansa and PR only

Diploma/Bachelor Degree in Civil, Mechanical, Electrical and Electronic Engineering,science

Minimum 10-15years

Knowledge in AutoCad, MS office & MS project

Knowledge in material procurement

Knowledge in quantity take off

Able to handle the contractual matter

Able to handle the sub-contractors and vendors

Knowledge in safety standards

Good communication skils and writting skills

Experience in process industry like pharmaceutical, oil and petrochemical

Coordination with BMS Supplier, Electrical and HVAC Sub Contractors

Managing safety requirement on site

1. Assist M&E/ Design Consultants in reviewing the design intend and identify system discrepancies or improve system performance if necessary.
2. Carry out value engineering to the system whenever necessary without compromising the system performance and compliance to the local authorities’ requirements / Local Code of Practices.
3. Perform Equipment selection in accordance to the engineering calculation done and approved by M&E Consultants.
4. Perform sizing and selection of the Electrical system material in accordance to the engineering calculation done and approved by M&E Consultants.
5. Liaise with the equipment suppliers and material suppliers to ensure selection of the equipment are relevant and compliance to the technical specification/requirements.
6. Prepare technical submission to M&E Consultants for approval and follow up on the comment (if any) related to the submission.
7. Work closely with the associate team members to see that overall Electrical system design development are meeting the design intend of M&E Consultants.
8. Take charge in the overall planning and execution of Electrical system Testing & Commissioning.

About the Role:

We are seeking a motivated and detail-oriented Junior Test Engineer to join our team. In this role, you will be responsible for ensuring the quality and reliability of our operations system through testing and continuous improvement. If you are passionate about quality assurance, have an eye for detail, and are eager to grow in the field of software testing, we would love to hear from you!

Objectives of this Role:

1. Ensure the highest quality of our operations system by developing and executing tests to detect and report any errors in the product.

2. Develop suitable testing plans and frameworks that align with our customers' needs.

3. Coordinate with various functions and teams to incorporate necessary product changes.

Responsibilities:

1. The role involves writing test cases, preparing and creating test data, executing and retesting test cases.

2. Able to leveraging on inhouse GenAI for test case creation and enrichment

3. Ensure test runs and results are completed within the given time frame.

4. Develop and execute test plans to validate software functionality against requirements and specifications.

5. Identify, report, and track software defects and issues.

6. Perform functional, performance, security, and regression testing of software products.

7. Report test results and defects to the development team and other stakeholders, and work on their resolution.

8. Provide suggestions and feedback to improve the quality of the software development process across teams.

9. Stay updated with the latest testing tools, techniques, and methodologies.

10. You will work closely with the Testing Centre of Excellence (COE) to enhance testing processes and standardize testing practices across operations

Required Skills and Qualifications:

1. Degree or diploma in computer science, engineering, or similar technical certifications.

2. At least 1-3 years of experience in testing, quality assurance, or similar roles in the banking industry is non nego

3. Excellent problem-solving skills, an analytical mindset, and strong communication skills.

Preferred Skills and Qualifications:

1. Proficiency in testing tools such as JIRA, Selenium, Appium, and other testing frameworks.

2. Certifications such as ISTQB (International Software Testing Qualifications Board) and CSTE (Certified Software Tester).

Internal ref: 9278

Regards,

Lini

Recruitment Consultant

R22108463

Responsibilities:
1. The role involves writing test cases, preparing and creating test data, executing and retesting test cases.
2. Able to leveraging on inhouse GenAI for test case creation and enrichment
3. Ensure test runs and results are completed within the given time frame.
4. Develop and execute test plans to validate software functionality against requirements and specifications.
5. Identify, report, and track software defects and issues.
6. Perform functional, performance, security, and regression testing of software products.
7. Report test results and defects to the development team and other stakeholders, and work on their resolution.
8. Provide suggestions and feedback to improve the quality of the software development process across teams.
9. Stay updated with the latest testing tools, techniques, and methodologies.
10. You will work closely with the Testing Centre of Excellence (COE) to enhance testing processes and standardize testing practices across operations

---------------------------

Please refer to U3’s Privacy Notice for Job Applicants/Seekers at https://u3infotech.com/privacy-notice-job-applicants/. When you apply, you voluntarily consent to the collection, use and disclosure of your personal data for recruitment/employment and related purposes.

Element has an opportunity for Lab Engineer for Singapore. In this role, you will be involved in project plan, coordination, operation for soil investigation works. Attend the project meeting if required. Day-to-day site operation to ensure works are constructed as per project & safety requirement. Identify the soil/rock & record the field log. Take the soil sample for lab test. Supervise site works. Liaise with clients on site works / projects. Plan and arrange the Logistics

This role is based in Sungei Kadut Loop, Singapore.

Job Duties:

• Schedule the testing programmes according to priority
• Execute the soil testing works to determine the physical and mechanical of the soil samples: Supervise the technicians to prepare the correct samples for soil testing (e.g., check the assignment and UD soil samples)
• Carry out extrusion of the soil samples
• Liaise with clients for samples that are unable to meet their requirements for their decision-making
• Carry out the soil tests according to BS standards or standards specified by clien and submit the approved soil testing reports to clients

Job Requirements:

• Degree in civil engineering or geology, certificate in Site Investigation for Supervisors (BCA) is an advantage with 2 years’ relevant experience in major infrastructure projects
• SEC(K) Higher skill will be an advantage
• Physically fit and able to withstand the challenging working conditions
• Strong and determined quality focus with indefatigable determination to get the job done under the most challenging conditions and meet tight deadlines with minimum supervision
• Self-motivated team player with excellent organisational and communication skills

HOW TO APPLY:

Interested applicants, please submit your updated resume to [email protected]

Please state your availability, current & expected salaries for processing purpose. All applications will be treated in the strictest confidence. We regret that only shortlisted candidates will be notified.

1.Attend vessel performs inspections,calibration, testing and troubleshooting on electrical & automation systems

2. Service/overhauling automation/electrical equipments in workshop

3.Good communication with shipcrew and superintendent

4.Good communication with shipyard

5.Prepare reports after finished the service job

A. Main Responsibilities

1 Responsible for all on-site technical and engineering matters.

2 Ensure works carried out meet company’s quality standards & contractual requirements.

3 Involved in project planning, monitoring project progress and schedule.

Including prepare work plan, schedule, preparation all the related work procedure/method statement, job safety analysis, technical clarification.

4 To co-ordinate with the client, consultant, sub-contractors on all project aspects and need be, to provide all technical and non-technical resolutions followed by documentation.

Include attending all progress meeting.

5 Assisting Project Manager in monthly progress claims and monthly progress reports.

6 Ensuring supervisors, foremen, workers and sub-con meets client & regulatory work requirements. 7 Ensuring Environmental, Safety and Health practices are carried out at all times.

8 Other ad-hoc duties assigned from time to time

1. Preparation of maintenance schedule according to clients master schedule.

2. Preparation of progress report and submission

3. Procurement of material/ parts/ components

4. Technical assessment of systems and introduction of retrofit / replacement recommendation to clients

5. On the job risk analysis and preparation of risk assessment procedure.

6. Preparation of method of statement / process for presentation to clients.

7. Perform checks and inspections of entire systems including control parameters attendance.

8. Troubleshooting of fault / breakdowns and rectification according to authorities / clients requirement.

9. Perform full set of testing complying to authorities / clients requirement.

10. Perform maintenance program and complying to authorities / clients requirementt.

11. Attendance of meeting and or site survey with clients.

12. Submission of quotations / costing to clients within stimulated time frame.

13. Maintenance of good public relationship with vendors / clients.

14. Logistic and manpower planning and arrangement.

1.Knowledge of Electrical & Mechanical

2.Few years of hands on experience on repair and servicing of machineries.

3. To assist for new machine installation, maintenance, troubleshoot and repair.

4.Able to work and communicate well with customers and colleagues.

5.Good working attitude

6. Travelling required and able to travel within short notice

Responsibilities:-

1. Inspect outgoing parts and incoming sub-contracted parts according to established procedure / specification of inspection and carry out Incoming Process Inspection.

2. Maintain quality record and file quality data.

3. Highlight quality problems discovered to the QA Manager and Factory Manager / Production Manager / Asst. Production Manager for action.

4. Ensure that all non-conforming products are not mixed with good products prior to disposition.

5. Authorise the rejection of parts if found unsatisfactory.

6. Authorise the release of conforming parts to be sent to the store for subsequent delivery to customers.

7. Perform factory routine test and check of switchboards completed in the workshop.

8. Testing and commissioning of switchboards on board vessels or on-site to the satisfaction of customers; and attend to warranty claims / quality complaints.

9. Conduct official tests on the switchboards which require witnessing by surveyors or consultants and also maybe with the presence of customers.

10. Assist the Manager in quality responsibilities and achieving quality objectives.

11. Maintain good housekeeping in the QA Department.

12. Observe and adhere to safety rules during the performance of every task.

13. Ensure the use of calibrated instrument for inspection.

14. Initiate action to prevent the occurrence of Product Non-Conformity.

15. Initiate, recommend or provide solutions to problem detected.

16. Verify the implementation of solutions.

17. Control further processing and delivery of Non-Conforming products until the deficiency has been corrected.

18. Carry out other responsibilities as and when assigned by the superiors.

19. Follow the procedures of Quality Management System for effective implementation and control.

Some responsibilities of a project engineer include:

• Planning, scheduling, predicting, and managing technical tasks
• Solving complex problems, such as transportation planning and grid interconnection
• Making decisions
• Providing leadership
• Using math skills
• Managing projects
• Communicating effectively

Project engineers are concerned with the engineering aspects of a project, while project managers are concerned with the business aspects.

Duties & Responsibilities:

• Study drawings for the projects and understanding requirements
• Determine operation requirements and preparing schedule
• Liaise with internal/external parties for the execution of works
• Ensure timely delivery of projects according to schedule
• Updating of project records for reporting purposes and submission of reports
• Attend site meetings and resolve technical/operational issues independently
• Undertake ad-hoc duties related to project execution
• Any other ad-hoc duties assigned

Requirements:

• Diploma/ Degree in Civil Engineering or any equivalent
• Min. 2 years of experience
• Able to work independently and as a team
• Good communication and interpersonal skills

12 months renewable contract through Encora

Design, implement, and manage storage systems for organizations. They ensure data is stored efficiently, securely, and reliably.

Key Responsibilities

1. Design and implementation: Plan and deploy storage systems, including SAN, NAS, and object storage.

2. Storage management: Monitor, maintain, and optimize storage systems for performance, capacity, and availability.

3. Data protection: Implement data backup, replication, and disaster recovery solutions.

4. Troubleshooting: Identify and resolve storage-related issues.

5. Capacity planning: Forecast storage needs and plan for upgrades and expansions.

Nice-to-Have Skills

1. Certifications: Storage-related certifications, such as EMC, NetApp, or VMware.

2. Cloud certifications: Cloud computing certifications, such as AWS, Azure, or Google Cloud.

3. Virtualization: Knowledge of virtualization technologies, such as VMware or Hyper-V.

4. Networking: Understanding of networking fundamentals, including TCP/IP, DNS, and DHCP.

Education and Experience

1. Bachelor's degree: In Computer Science, Information Technology, or a related field.

2. Experience: 2-5 years of experience in storage engineering, system administration, or a related field.

Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues. Perform preventative maintenance on tools and equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment. Maintain maintenance inventory and requisition parts and supplies as needed. Record information for unfinished calls prior to shift change.

Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearance are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Ensure adherence to quality expectations and standards. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Speak with others using clear and professional language. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance. Move up and down stairs, service ramps, and/or ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Perform other reasonable job duties as requested by Supervisors.

Marriott International is an equal opportunity employer. We believe in hiring a diverse workforce and sustaining an inclusive, people-first culture. We are committed to non-discrimination on any protected basis, such as disability and veteran status, or any other basis covered under applicable law.

Job Description & Requirements

• Able to interpret civil, structural drawings and details
• Lead, coordinate and mange civil & structure of the project
• To lead the C&S Team in planning and execution of day – to – day operations
• Ensure civil and structural requirements meet project submission and project schedule
• Be responsible for the planning and scheduling of time and resources for building construction projects
• Responsible for all on-site technical and engineering matters
• To ensure works carried out meet company’s quality standards & contractual requirements
• To monitor project progress and schedule and track the progress and time required when there is a delay/disruption to project
• To develop detailed workplans and cost estimations of approved items to forecast cost and workforce requirements to allow efficient scheduling of works
• Execute overall scheduling and specific planning work
• Design, implement progress and schedule control systems for the project according to set requirements
• Experienced in performing construction planning, and to co-ordinate with the client, sub-contractors, consultants and Authorities on all project aspects
• To Assist Project Manager in monthly progress claims and monthly progress reports
• To ensure that all requirements by Clients, Consultants and relevant Authorities are adhered and established

1) Minimum 3 years of experience from Construction / Building / Engineering industry

2) Recognised Degree by PEB

Job Description

• Industry/ Organization Type: IT/Telecommunications
• Position Title: Project Engineer
• Working Location: Macpherson
• Working Hours: 5 working days (Mon to Fri 8.30AM – 5.30PM)
• Salary Package: Basic Salary up to $3,500 + AWS + Bonus
• Duration: Permanent

Key Responsibilities

• Responsible for managing the overall direction, coordination, implementation, execution, control and completion of structured cabling projects
• Monitor the day-to-day activities in the field, managing the flow of information, and reporting and tracking issues arising from progress, quality and safety
• Assist in completing the handover plan, ensuring documentation is completed and expectations are met on time and with quality
• Identify issues proactively and work with the team to resolve effectively
• Maintain and develop strong relationship with customers with direct interaction with focus on improving customers’ perception of service, quality, on time delivery, responsiveness, and problem solving.
• Any other ad-hoc duties as assigned

APPLY NOW!!!

• Diploma/Degree in Engineering or any relevant discipline
• Has 1 year of experience with fiber optics or relevant products in the industry
• Prior experience with Structured Cabling/ELV is an added advantage

Kindly apply through ANY of the following methods:

• Submit your application by clicking the APPLY button;
• Email your resume to [email protected]. Please indicate #71056 on the email subject.

Anradus Application Policy: We value each application and ensure every resume is reviewed. Our process is efficient, typically concluding within 3 working days. If you do not receive communication from us within this timeframe, it's likely that your application has not been shortlisted by our client. In such cases, we recommend continuing your job search to maximize your opportunities.

Anradus Pte Ltd | EA License No. 20C0161 | Angel Lim | EA Reg No.: R1769781

• Prepare M&E works schedule based on the project master schedule
• Accountable for all M&E works, site inspections, monitoring of progress of work & variation order
• Responsible for ensuring that all M&E works of the sub-contractors are in compliance to the Company’s and authorities’ requirements
• Review M&E drawings and other materials submissions prepare by the M&E Coordinators to ensure that there are no discrepancies and/or conflicts with the architectural and structural elements
• To prepare reports for the Consultant Progress and Technical Meetings
• To coordinate with clients, consultants, sub-contractors and project teams to ensure smooth delivery of work including resolution of design and construction issues

• Candidate must possess at least Bachelor's Degree/Post Graduate Diploma
• At least 5 Year(s) of working experience in the related field is required for this position.
• Required Skill(s): ITIL, VMware, Windows server ,Windows 2012,2016 &2019
• Preferably Senior Executive specialized in IT/Computer - Network/System/Database Admin or equivalent.

Detailed Job Description :

• Administration and troubleshooting of Windows Servers (Windows 2012/2016 &2019)
• Able to Install of windows servers and has good troubleshooting skills for Wintel systems, knowledge in hardening and securing of Wintel systems.
• Advanced level of Administration of Windows server with active directory, DNS, DHCP and High Availability.
• Microsoft cluster configuration, administration and troubleshooting.
• Working experience with various storages, precisely for cluster configurations is good to have.
• Working knowledge in SAN environment and storage space management from systems side is good to have.
• File system and quota management.

Job Responsibilities:

• Oversee C&S design progress against schedule and budget on projects.
• Manage the interfacing with M&E contractors
• Coordinate with engineering consultant, review and comment its design drawings
• Monitor the design progress and statutory submission against project baseline program
• Implement corrective measures for identified distractions or issues.
• Review, negotiate and recommend for approval/disapproval on design change orders.
• Administer design subcontract including processing monthly invoices for payment.
• Coordinate and monitor status of design incentive/disincentive programs complying with provisions of design subcontract.
• Perform constructive reviews conforming design to prime contract requirements and proposal commitments.
• Coordinate and control design submittals for owner’s review and approval.
• Lead a design team for overall C&S and architectural design works, assist QS team for material takeoff and tendering, manage subcontractors and support site construction works
• Facilitate resolving design issues with owner.

Job Requirements:

• Degree qualifications in Civil and Structural Engineering
• Preferably 2 years of relevant expereince in the planning and design of major waste to energy projects or similar major projects
• Positive working attitude and ability to work in a fast-paced environment
• Well versed with C&S software

Main Responsibilities

· Responsible for the assembly, debugging of stations and installation duties as required

· Responsible for pre-alignment stations with guidance from Manufacturing Manager

· Run machine during debug with guidance from Manufacturing manager

· Follows direction from Project Manager on prioritization.

· Provide technical training to customer which includes mechanical hardware & pneumatics, product change-over procedure, critical setup/alignment and preventive maintenance.

· Support installation process at customer site

· Prepare manufacturing documentation as part of the project documentation for projects.

· Be responsible to meet the budget and deadline of pallets and critical stations

· Collaborate with other Project Engineers to streamline activities and share technical difficulties

· Other tasks assigned by line manager

Job duties and responsibilities:

• Design new products and continually improve existing products to meet industry standards and customer requirements.
• Develop technical manuals and Instruction Operating Manuals for products, ensuring accuracy and usability.
• Prepare, review, and verify design drawings, detailed specifications, and fabricated drawings for compliance with technical standards.
• Create Bills of Materials (BOMs) and ensure accurate documentation.
• Order materials and supplies; monitor the progress of fabrication and installation to ensure alignment with design specifications and schedules.
• Perform quality control checks to ensure the integrity of materials, components, and final products.
• Update and maintain design records, project databases, and documentation for traceability and reference.
• Track and coordinate the delivery of goods and materials to meet project timelines.
• Collaborate with cross-functional teams, including procurement, production, and project management, to address technical challenges.
• Provide technical support and guidance to the fabrication and installation teams during project execution.
• Identify opportunities for cost optimization, design innovation, and process improvement.

Job Requirements:

• Degree or Diploma in Mechanical, Precision, Tool, and Die Engineering, or a related field.
• At least 2 years of experience as a Design Engineer.
• Proficiency in drafting software such as AutoCAD, SolidWorks, 3D modeling software, or equivalent.
• Experience in Marine Hydraulic Applications, with knowledge of valves and actuators, as well as gear design (e.g., spur gear, planetary gear, bevel gear).
• Understanding of forging, casting, and precision CNC machining processes.

BIOTRONIK is a leading Medical Device company dedicated to revolutionizing patient care through innovative medical device software solutions. With a commitment to cutting-edge technology and a passion for improving healthcare outcomes, we are at the forefront of transforming the industry.

We are seeking a skilled and motivated Cloud Test Engineer to join our team. In this role, you will play a crucial part in ensuring the quality and reliability of our cloud-based software solutions for medical devices product.

If you are passionate about leveraging cloud technology to make a positive impact on medical device product, we want to hear from you.

Your Responsibilities

• Develop and execute test plans, test cases, and test scripts for Cloud-based software solutions, ensuring thorough testing coverage.
• Collaborate with cross-functional teams, including software developers, product managers, and quality assurance professionals, to identify and address software defects.
• Design, implement, and maintain automated testing frameworks for cloud-based applications to enhance testing efficiency and scalability.
• Conduct performance testing, load testing, and stress testing of Cloud-based software systems to ensure optimal performance under various conditions.
• Work closely with regulatory affairs and compliance teams to ensure testing proceccess align with industry standards and regulations.

Your Profile

• Bachelor’s Degree in Computer Science, Software Engineering, or a related field; advanced degree preferred.
• Proven experience as a Test Engineer is preferable.
• Experience with automated testing frameworks such as Selenium, Junit and Gherkin.
• Familiarity with cloud platforms such as AWS, Azure, or Google Cloud Platform.
• Strong analytical skills and attention to detail.
• Excellent communication skills and the ability to collaborate effectively in a team environment.
• Prior experience from the healthcare or medical device industry would be an added advantage.

What we offer

• being encouraged to think and act entrepreneurially
• working in global teams and projects
• developing yourself professionally