• Attend to all daily quality and process related issues.
• Execute process validation for new and existing products with tooling and quality personnel.
• Participate in the Continuous Process Improvement programme to improve productivity, reduce scrap.
• Perform internal quality system audit.
• Optimize automation parameters and meeting specific cycle time for existing and new products.
• To provide timely support to ensure efficiency of production machines & equipment's are met.
• To work with respective department on product quality issues.
• Initiate containment plan and implement effective long term plan on quality related issues.
• Execute engineering change notice from customer.
• Analyze quality data collected periodically and provide recommendation to management for improvement.
• Compliance to all regulatory and in house system requirements especially for medical and automotive customers.
• Train and assess production staff on processes and product where applicable.
• Attend routine production and quality meetings.
• Perform additional tasks given by the management.

Job Requirements:

• Diploma with 2-3 years of relevant experience.
• Knowledge in ISO9001, ISO13485, TS16949, familiar with FMEA.
• Require to perform shift work (Morning & Afternoon shift).

Interested applicants, please email your resume to [email protected]

E-Ployment Consultancy

EA License No: 09C0884

EAP Name/ Registered No: Ivan Mah/ R1108310

Job Description

Key Responsibilities

Performs all standard service activities through Tier I unassisted. Performs standard Tier II with assistance. Able to perform routine preventative maintenance within established timeframes. Completes quality repairs.

Responds to fab issues by communicating with other engineers and participating in escalation conference calls. May participate in projects to reduce costs and increase uptime.

Verifies operational quality of system equipment. Assists senior engineers as needed.

Applies diagnostic techniques and use of documentation and test equipment with assistance from senior engineers. Ability to diagnose and resolve technical problems. Uses training and experience to identify some process, software or hardware related system problems.

Strives to perform BKM’s. Uses knowledge management systems. Follows all IP guidelines.

Assumes responsibility for complete customer satisfaction within work area. Assists in planning, communicating, and coordinating support plans with customer management.

Complies with all safety procedures and consistently demonstrates safety as a value.

Complies with all safety procedures and consistently demonstrates safety as a value.

Functional Knowledge

• Has established skills to perform a range of day-to-day activities

Business Expertise

• Understands how the assigned duties relate to others in the team and how the team integrates with others in the discipline
• Assumes responsibility for full customer satisfaction assuring excellent relations within assigned area

Leadership

• Has no supervisory responsibilities; manages own workload

Problem Solving

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established options

Impact

• Impacts own team through the quality of the services or information provided; follows standardized procedures and practices and receives regular but moderate supervision and guidance

Interpersonal Skills

• Uses communication skills to exchange information

Key Responsibilities

Performs all standard service activities through Tier I unassisted. Performs standard Tier II with assistance. Able to perform routine preventative maintenance within established timeframes. Completes quality repairs.

Responds to fab issues by communicating with other engineers and participating in escalation conference calls. May participate in projects to reduce costs and increase uptime.

Verifies operational quality of system equipment. Assists senior engineers as needed.

Applies diagnostic techniques and use of documentation and test equipment with assistance from senior engineers. Ability to diagnose and resolve technical problems. Uses training and experience to identify some process, software or hardware related system problems.

Strives to perform BKM’s. Uses knowledge management systems. Follows all IP guidelines.

Assumes responsibility for complete customer satisfaction within work area. Assists in planning, communicating, and coordinating support plans with customer management.

Complies with all safety procedures and consistently demonstrates safety as a value.

Complies with all safety procedures and consistently demonstrates safety as a value.

Functional Knowledge

• Has established skills to perform a range of day-to-day activities

Business Expertise

• Understands how the assigned duties relate to others in the team and how the team integrates with others in the discipline
• Assumes responsibility for full customer satisfaction assuring excellent relations within assigned area

Leadership

• Has no supervisory responsibilities; manages own workload

Problem Solving

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established options

Impact

• Impacts own team through the quality of the services or information provided; follows standardized procedures and practices and receives regular but moderate supervision and guidance

Interpersonal Skills

• Uses communication skills to exchange information

Job Description & Requirements

Successful candidate will assist Project Manager on the following tasks:

• Site & project management and daily operations, routine/adhoc service work for industrial water treatment systems.
• Overall project planning, scheduling, monitoring and updating to meet project completion targets.
• Site co-ordination, monitoring and report work progress.
• Liaising, negotiating and managing sub-suppliers/sub-contractors in the region with respect to procurements and in-situ execution of sales contracts or projects.
• Assist Project Manager to coordinate and communicate with end-user customers, local and regional suppliers for the production of deliverables as per contractual specifications and schedules.
• Compiling and handing over operation and maintenance (O&M) manuals to our end-user customers
• Any other duties given by Project Manager to support on projects.

Skills and Experience:

• Degree/Diploma in Chemical, Environmental or Mechanical Engineering.
• Preferably with 3-5 years of related experience in project management, project engineering, operations for industrial water treatment systems.
• Ability to read and understand specification, fabrication, erection, and standard engineering drawings.
• A team player that is willing to work with different age groups and nationalities.

Job Description

Key Responsibilities:

• Performs all standard service activities through Tier I unassisted. Performs standard Tier II with assistance. Able to perform routine preventative maintenance within established timeframes. Completes quality repairs.
• Responds to fab issues by communicating with other engineers and participating in escalation conference calls. Verifies operational quality of system equipment unassisted . Assists senior engineers as needed.
• Follows all checklists and procedures and ensures correct Revs of procedures and schematics are available prior to performing work.
• Strives to perform BKM’s. Uses knowledge management systems. Follows all IP guidelines.
• Able to diagnose and resolve recurring technical problem. Demonstrates consistent ability to execute escalation plan. Able to resolve Day-Day issues. Exposure to systemic issue resolution. Able to support the preparation and delivery of technical issues to internal and external stakeholders. Knowledge in fundamental theories. Minimum aid needed to read circuit diagrams. Single primary product and platform. Executes projects to reduce costs and increase uptime.
• Applies diagnostic techniques and use of documentation and test equipment with assistance from senior engineers (Testing). Has the ability to diagnose and resolve technical problems (Corrective maintenance). Uses training and experience to identify some process, software or hardware related system problems (Predictive maintains).
• Assumes responsibility for complete customer satisfaction within work area. Assists in planning, communicating, and coordinating support plans with customer management. Complies with all safety procedures and consistently demonstrates safety as a value.

Other Requirements: This is a physically demanding position that often requires extensive walking, standing for extended periods of time, working in tight spaces, bending, squatting, twisting, kneeling, reaching, climbing stairs and ladders, lifting up to 35 lbs., the ability to distinguish between colors, the ability to work in an environment with noise that may be difficult for some individuals with sensitivity to noise, and the use of hand and power tools. Additionally, because this position generally involves working in a clean room, it requires the use of appropriate Personal Protective Equipment such as coveralls, hoods, booties, safety glasses, gloves, respirators, chemical aprons, and face shields.

Functional Knowledge:

• Has established skills to perform a range of day-to-day activities.

Business Expertise:

• Understands how the assigned duties relate to others in the team and how the team integrates with others in the discipline.
• Assumes responsibility for full customer satisfaction assuring excellent relations within assigned area.

Leadership:

• Has no supervisory responsibilities; manages own workload.

Problem Solving:

• Recognizes and solves typical problems that can occur in own work area without supervisory approval; evaluates and selects solutions from established options.

Impact:

• Impacts own team through the quality of the services or information provided; follows standardized procedures and practices and receives regular but moderate supervision and guidance.

Interpersonal Skills:

• Uses communication skills to exchange information.

Job Description

Key Responsibilities

• Design or modify electrical/electronic engineering assemblies, layouts/schematics and/or detailed drawings/specifications of difficult scope
• Problem identification and troubleshooting a variety of complex electrical problems with limited supervision
• Define, coordinate, perform and generate engineering test reports with limited supervision
• Technically lead and/or executes engineering projects, including development of key suppliers
• Implements concepts for variety of complex product issues and electrical solutions of difficult scope
• Generates electrical product specifications and reviews engineering documentation
• Demonstrates conceptual and practical expertise in own discipline and basic knowledge of related disciplines
• Interfaces with internal and external customers regarding complex electrical issues for specific projects
• Acts as a resource for colleagues with less experience; may lead small projects with manageable risks and resource requirements

Educational Qualifications

• PhD/ Master/ Bachelor’s degree in Electrical Engineering, Electronics and Communication, Mechanical Engineering or related engineering field

Functional Knowledge

• Demonstrates conceptual and practical expertise in own discipline and basic knowledge of related disciplines
• Hands-on experience in electrical schematic diagram, PCB/ Low voltage circuit design for power and control
• Problem-solving and troubleshooting skills

Interpersonal Skills

• Excellent verbal and written communication skills and the ability to interact professionally with a diverse group of internal and external stakeholders
• Self-starting individual, proactive and resourceful
• Good communication and interpersonal skills

Work Location

• Science Park II

Key Qualifications

• Proficiency in programming languages such as Java, Python, or JavaScript.
• Experience with cloud hosting platforms such as AWS, Azure, or Google Cloud Platform.
• Strong understanding of Kubernetes and containerisation technologies.
• Excellent problem-solving skills and attention to detail.
• Strong communication and interpersonal skills, with the ability to work effectively in a team environment.

Description
- Design, develop, and maintain full stack applications, with a focus on platform development and cloud hosting.

- Collaborate with multi-functional teams to define project requirements and deliver high-quality solutions.

- Implement best practices for software development, including code reviews, testing, and documentation.

- Optimise application performance and scalability through the use of Kubernetes and other cloud technologies.

- Develop and maintain deployment pipelines to automate the software release process.

- Stay up-to-date with the latest trends and technologies in software development and platform engineering.

Education & Experience

Bachelor's degree in Computer Science, Engineering, or related field.

Job Responsibilities:

• General encapsulation and optimization of the underlying framework; ensure the stability and efficiency of the underlying framework SDK, making it cross-platform and optimized for specific platforms.
• Transformation of algorithm application achievements; conversion of deep learning-related algorithm achievements, including detection, classification, segmentation, and other algorithms implemented based on the deep learning underlying SDK.
• Responsible for the creation and optimization of engineering algorithm strategies; design and implementation of engineering algorithm strategies for industry businesses based on the algorithm SDK; optimize engineering algorithm strategies for different application scenarios.

Minimum Qualifications:

• Bachelor's degree or above in computer science, electronics, or related fields.
• Proficiency in C/C++ development, solid programming skills, familiarity with common data structures and algorithms, object-oriented programming, and common architecture and design patterns.

Preferred Qualifications:

• Master's degree or equivalent experience in industry with in computer science, electronics, or related fields.
• Preference for those familiar with GPU programming, RTOS (NuttX, RT-Thread) and deep learning-related knowledge, image processing algorithms.
• Those with Android or iOS development experience are preferred.

Essential Skills:

• Excellent networking and interpersonal skills.
• Problem-solving, and analytical thinking.
• Highly organized, diligent with great attention to detail.
• Active listener, able to interpret and playback stakeholder requirements.
• Highly driven and able to work individually and as part of a team.

We regret to inform you that only shortlisted candidates will be contacted.

View more jobs : www.blueboxjobs.com

As a Field Engineer (C&S), you will be responsible for monitoring construction / maintenance activities. The incumbent should take steps to ensure that construction progresses as scheduled and that work specification are followed. Daily, the incumbent must inspect the construction site and coordinate delivery schedules with contractors.

You are also expected to perform the following:
• Maintenance of all Civil and Structural plant assets, including drainage systems and oil traps, insulation & cladding, coating, furnace refractory, etc. to ensure high plant availability and equipment integrity.
• Undertake all Civil and Structure maintenance activities related to Corrective and Preventive Actions and Management of Change (MOC) activities related to the Production Unit
• Assure that supervisors and inspectors adhere to the approved Inspection and Test Plans and project quality plans when conducting witness, inspection, and surveillance checks. Ensure Quality Control tests and checks are properly recorded and conform to project specifications, AFC drawings, and method statements.
• Ensure accuracy of approved construction drawings, documents and procedures for proper and correct construction execution.
• Provides good documentation to ensure all Civil and Structure drawings can be updated to reflect the latest changes.
• Ensure compliance to HSE standards and requirements to ensure that the Bukom Petrochemical Complex is a safe place to work in.
• Confirm day-to-day civil maintenance work and co-ordinate work details with contractors where appropriate.
• When required, to attend daily planning sessions with operations and confirm the schedule and procedures for safe and efficient execution of the job.
• Work with TA / SD (Plant Turn around / Shut down) leads & Planners to effectively integrate work scope into overall execution strategies in a TA / SD event.
• Execute the civil maintenance works using contractors.
• Assist Maintenance Manager in managing shutdowns and project works.
• Carry out any other related duties as required.
• Perform the role of an Authorized Permit Applicant and/or Authorized Engineer as per site Permit to Work (e-PTW) requirement.

Requirement:
• Degree/Diploma in Civil Engineering or equivalent.
• Min. 3 to 5 years civil engineering experience in construction or maintenance in oil and gas, chemical / petrochemical or related industries will be an advantage.
• Knowledge in local authority requirements e.g. the Building Construction Authority (BCA), Ministry of Manpower (MOM), etc.
• Knowledge or familiarity with Coating / Painting (NACE qualified), Insulation & Cladding and Refractory works will be an advantage.
• SAP (GSAP) knowledge in Maintenance Module will be an advantage.
• Experience in field work relating to interfacing and stakeholder’s engagement.
• Excellent communication, analytical, problem-solving, and troubleshooting skills.
• Brown field experience and demonstrated ability to coordinate and interact with the run-and-maintain organization
• Ability to use business software, including Excel, PowerPoint, Word, PDF writer with proficiency in pivot tables and data interpretation.

Job Description

We are seeking a talented and experienced DevOps Engineer to join our dynamic tech team. In this role, you will be instrumental in designing, implementing, and maintaining the infrastructure that supports our rapidly evolving platform. You will collaborate closely with our development, QA, and product teams to streamline deployment processes, enhance system performance, and ensure the scalability and reliability of our services.

Key Responsibilities:

• Design, implement, and manage scalable, secure, and reliable infrastructure on AWS EC2.
• Utilize Docker, Kubernetes, and EKS for containerization and orchestration of microservices.
• Develop and maintain CI/CD pipelines using GitLab and ArgoCD to automate the build, test, and deployment processes.
• Integrate QA tooling into CI/CD pipelines, including Cypress for E2E testing.

Configuration and Automation:

• Implement Infrastructure as Code (IaC) using Terraform for efficient resource provisioning.
• Manage configuration management using Ansible to automate system configurations and deployments.

Networking and Security:

• Configure and manage load balancers using Traefik to ensure optimal traffic distribution.
• Implement service mesh technologies like LinkerD to manage service-to-service communication securely.
• Ensure infrastructure security and compliance with industry best practices.

Monitoring and Logging:

• Set up and maintain monitoring and alerting systems using tools like CloudWatch, Prometheus, Grafana, and Splunk.
• Proactively identify and resolve system issues to maintain high availability and performance.

Collaboration and Support:

• Work closely with development and QA teams to understand application requirements and ensure seamless integration.
• Provide support for development and staging environments, facilitating efficient testing and deployment cycles.

Optimization and Cost Management:

• Analyze system performance metrics to optimize infrastructure for cost and efficiency.
• Implement strategies for resource optimization without compromising on performance.

Requirements

• Bachelor's degree in Computer Science, Information Technology, Engineering, or a related field.
• Minimum of 3 years of experience in a DevOps or similar role.
• Proven experience with AWS services, particularly EC2, RDS, and networking components.
• Strong expertise in containerization using Docker and orchestration with Kubernetes.
• Past experience as a software developer is highly advantageous.
• Proficiency in setting up CI/CD pipelines using GitLab and ArgoCD.
• Hands-on experience with Infrastructure as Code tools like Terraform.
• Familiarity with configuration management tools such as Ansible.
• Knowledge of load balancing with Traefik and service mesh implementations using LinkerD.
• Experience with logging and monitoring tools, specifically Splunk.
• Scripting skills in Bash, Python, or Go for automation tasks.
• Understanding of microservices architecture and RESTful APIs.
• Familiarity with our tech stack is a plus: TypeScript, Go, ReactJS, ExpressJS,
• Gin-gonic, GraphQL with JWT authentication.

Soft Skills:

• Strong problem-solving and analytical abilities.
• Excellent communication and interpersonal skills.
• Ability to work collaboratively in a fast-paced, agile environment.
• Detail-oriented with a focus on delivering high-quality work.

Preferred Qualifications:

• Certifications such as AWS Certified DevOps Engineer, Certified Kubernetes Administrator (CKA), or similar.
• Knowledge of Redis, MySQL, PostgreSQL, and Elasticsearch.
• Experience with QA tools integration, including Cypress and Pact.js.

Responsibilities:

1.Responsible for research and development of image generation technologies, including the development of foundational models for text-to-image generation, image editing techniques, image enhancement, and multimodal generation of text and images.

2.Keep up with the latest advancements in AIGC algorithms, be responsible for the research and development and engineering implementation of related technologies, and accelerate the adoption and optimization of cutting-edge AIGC technologies in business scenarios such as live broadcasting, short video, and instant messaging.

Requirements:

1.A Master's or Doctoral degree in computer vision, pattern recognition, machine learning, or related fields.

2.Some work experience in computer vision, deep learning, machine learning, computer graphics, etc, familiar with mainstream models and algorithms, and capable of following up and implementing new algorithms.

3.Strong engineering implementation ability, proficient in at least one deep learning framework (such as TensorFlow, PyTorch, etc.).

4.Good learning ability, teamwork, and communication skills.

5.Priority will be given to candidates with experience in GAN-related image generation and editing, video editing, style transfer, portrait editing, etc.

6.Priority will be given to candidates with experience in Stable Diffusion, ControlNet, DreamBooth, LoRA, etc.

7.Priority will be given to candidates who have published papers in internationally renowned AI conferences or have won awards in ACM competitions.

Job Description

Capabilities Development

*Lead the development and implementation of Group and partners OEMs’ (Original Equipment Manufacturers) new repair capabilities and report to the Industrialization Manager.

* Analyze technical data, gather market data, investment requirements to perform feasibility studies and Return on Investment.

* Perform self-assessments, engineering studies, build up justification file.

* Liaise with Quality for smooth airworthiness application for testing & repair capability integration.

*Liaise with the OEMs to clarify the requirements.

*Develop, source new equipment, consumables and chemicals and support investments linked to testing & repair policies.

* Drive the progress of the tasks, pilot projects’ milestones review with various stakeholders, report advancement, track investments and expenses, monitor contractors and suppliers, devise maintenance plans.

* Lead operations trainings and validation tests.

* Establish calibration requirements.

* Follow-up the testing & repair ramp-up with the workshops and support the Entry Into Service for new programs.

* Report to management. Flow down relevant and timely information.

Support & maintain new capabilities

* Coordinate with Product Support Engineer (PSE), and Operations personal to ensure optimal customer support.

* Assist the lead equipment maintenance when required.

* Implement systems or components modifications following notification of change related to CMM, Service Bulletins (SB) or Service Information Letters (SIL).

* Support workshop implementation of new requirements upon fleet upgrade and retrofit campaigns.

* Develop the Integrated Logistic Support at SEDSA levels.

* Help sourcing for material, suppliers, 3rd parties, alternatives.

* Review calibration requirements.

* Take a pro-active approach, initiate creative solutions to maintenance issues and assist the workshops in implementing best practices, Continuous Improvement, LEAN operations, cost

reductions and applying lessons-learned from previous or bench-marked experiences.

* Ensure that communication between all stakeholders, Head Quarter, OEMs, Workshops, Quality, Sales, Continuous Improvement, Supply Chain, Customers, Suppliers, is optimum.

* Ensure SEDSA contract terms & conditions are understood & satisfied. Pro-actively manage contractual issues with 3rd Parties and suppliers.

* Report to management. Flow down relevant and timely information.

Profile & Soft Skills

* Be rigorous and organized, able to handle multi-tasking and priorities.

* At ease to report and present progress through regular reviews with the management.

* Develop excellent relationships across multiple organizations & with all levels of workshops and other Company personnel.

* Safeguard interest of SAFRAN Electronics & Defense Services Asia (SEDSA) and partners OEMs.

Health, Safety & Environment

* Comply with all health, safety and environment (HSE) regulations as prescribed by law and company’s policies.

* Actively participate and contribute to HSE initiatives & Corporate HSE programs and in HSE risk communications & mitigations.

* Actively participate and contribute to 5S initiatives.

Continuous Improvement and Innovation

* Lead by example the Continuous Improvement and Innovation initiatives in the company.

* Implement innovations.

* Pilot Company Lean and Improvement projects. Review progress, deliverables and gains for key innovations.

* Be a driving force in the Participative Innovation, ONE SAFRAN and Green Belts Improvement

* Spearhead the QRQC, SQCDPI, 5S, Root Cause Analysis, ONE SAFRAN methodologies to be best in class.

* Perform any other duties as assigned.

Experience and Qualifications:

a) Degree in Mechanical/Electrical/Aeronautical Engineering

b) At least 3 years of Aviation Engineering experience, Technical Support Aircraft Maintenance and Repair Operations, in OEM or MRO environment

c) Proficient in product support and trouble shooting procedures

d) Hands-on experience on design and wiring of electronics test fixtures.

e) Experience in OEM technical support, or related MRO operations/engineering

f) Must be familiar with technical support environment, processes, and manuals used for aircraft maintenance. Working knowledge of the Aviation Airworthiness requirements like Part 145 is advantageous

g) Effective Project Management and interpersonal skills

h) Experience in calibration requirements and procedures

i) Proficient with Microsoft software applications

j) Working knowledge of the Aviation Airworthiness requirements like Part 145 is advantageous

k) Sound knowledge of quality systems such as ISO9000 and AS9110

l) Excellent attitude, good team player, motivated, driven, committed, reliable. Take ownership of the projects

m) Ability to multi task in a dynamic environment

n) Excellent communications skills. Well versed in written and spoken English

o) Able to think ahead, process data, make decisions and solve problems.

Job Description

• Accountable and ownership over customer’s/supplier’s implementation and maintenance of company's standard Quality ManagementSystems
• Handle and develop management in areas of qualification, audits, continual assessments, engineering change and qualitynonconformance issues
• Seek continuous improvement in process, policy, and procedures.
• Identify and set KPI metrics using reporting tools to fulfil standards and regulations
• Work with internal stakeholders in supplier development/customer requirements to ensure procedures and specification compliance bysuppliers
• Track, analyze and evaluate of supplier performance weekly/monthly trends
• Track and maintain customer/supplier quality indices· Coordinate and facilitate all CAPA activities (internal and external)
• Assist in planning and execution of all certification audits· Develop, update, and maintain QMS training materials for customers / suppliers
• Develop proper coordination internally to ensure timely submission, escalate and proactively resolve overdue quality related issues anddocumentation deadlines
• Other ad-hoc tasks as directed by the Department Manager
• Other duties as assigned

Qualifications

• Bachelor's degree (or equivalent experience) in Engineering with Quality Concepts or related field.
• Preferred: Bachelor’s in Electronics or Mechatronic with Quality Engineering as a minor.
• Bachelor's degree with at least 4 years, all aspects of Quality Engineering experience in the high technology industry
• Familiarity with Electrical and Electronic manufacturing, Motor manufacturing and assembly, and/or semiconductors
• Overseas / cross-cultural / cross-geographical experience
• Excellent written and oral communication skills with the ability to communicate ideas in both technical and user-friendly language internallyand externally

Other Information

Skillset(s) Requirement:·

• Experience in customer/supplier quality management processes
• Good Understanding of Quality Management Systems, ISO9001, 14001, 45001
• Professional ISO9001 auditor Certification
• Ability to work under pressure, establish priorities and deliver to fixed dates. Understand and manage the critical path
• Fluent with Microsoft office systems
• Strong in customer/supplier documentation control, records and CAPAs
• Excellent time management, organizational, and problem-solving skills
• Ability to anticipate issues and proactively propose and negotiate solutions.
• Excellent attention to details
• Maintain a mindset of continuous improvement, in terms of efficiency of internal and external processes, customer satisfaction andoptimization
• Able to join or lead conference calls occasionally outside normal business hours
• Good interpersonal skills with internal team.
• Willing to travel for work, if any (up to 5% travel)
• Looking for Singapore Citizen or PR ONLY if possible.

Attributes:

• Highest regard for Honesty and Integrity
• Open, and Supportive in work
• Willing to learn
• Zero politics

Job Description & Requirements

• Perform Corrective and Preventive Maintenance of wafer fab manufacturing equipment.
• Support the running of production in the module and ensure the readiness for production
• Maintain 6S practices in the Fab and maintenance support areas
• Participate and follow up on continuous improvement projects
• Provide clear and accurate pass down of line issues and documentation

Requirement

• Candidate must possess at least Diploma in Engineering (Electrical/Electronic), Engineering (Mechanical), Engineering (Mechatronic/Electromechanical) or equivalent.
• No work experience required.
• Preferably Entry Level specialized in Engineering - Mechanical/Automotive or equivalent.
• Work overtime during weekends and public holidays
• Working in cleanroom

• Provides technical and engineering leadership, and supports the development of new technologies within a local laboratory and potentially across the Element enterprise
• Provides counsel to coworkers and customers requiring critical analysis of data
• Is able to exchange technical information and knowledge with peers, senior colleagues and specialists across the element enterprise
• Actively seeks ways to disseminate critical testing knowledge, acumen and protocols throughout Element
• Is accountable for accurate and timely release of testing data to customers including sign-offs of quality control data as acceptable
• Is able to oversee and guide problem solving of complicated technical challenges
• Provides input and support on business development opportunities with new or existing customers
• Confident making both formal and informal presentations on conventional and/or routine testing to a wide range of stakeholders
• Assists in the professional development of novice technicians and engineers within the local laboratory
• Carries out crucial examination and implementation of testing concepts and data
• Utilizes an assortment of skill, methods, procedures and materials in advanced testing analysis
• Adept at drawing on internal knowledge as well as industry and/or academic resources in reaching testing conclusions

Review the Project technical documentation and requirements.
-Manage the engineering of the Project with close coordination with appointed Contractor(s) and Vendors.
-Coordinate preparation of technical specifications for procurement.
-Ensure an adequate standard of technical documentation in accordance with Air Liquide’s guidelines and standards
-Responsible for validating all specified requirements have been fulfilled.
-Responsible for ensuring documentation related to the Project is compiled and updated.
-Coordinate and assist with the resolution of solving technical problems arising during the project and for interfacing/supporting the various engineering disciplines and departments.
-Preparation of RFQ Package(s) for Project Tender.
-Oversee the bid evaluation and procurement phases.
-Responsible for providing cost and schedule estimates related to execution of the Project.
-Coordinate and support, arrangement with internal stakeholders (Design, FMEA, Design Review, Technical Documentation etc)
-Coordination with Client, Authorities, 3rd Parties, Contractors and Vendors for all aspects of the Project requirements, including approvals where required.
-Verify and act upon the remarks of the Client/Certifying Body.
-Responsible for providing technical support during pre-commissioning/commissioning and start-up.eng

Responsibilities:

- Perform on site customer support

- To conduct training internally and externally

- Provide expertise knowledge on technical support

- Communicate frequently with headquarters

Requirements:

• Competent in product knowledge
• Proficiency in Japanese language is compulsory
• Degree in Mechanical, Electronic or any other engineering disciplines
• 2 years relevant working experience in semiconductor industry
• Proficient in MS office
• Pro-active, people & team-oriented

Responsibilities:

· Draft and produce engineering drawings for modification of existing plant and future new project according to drafting office Code of Practice.

· Assist Supervisor to produce and update register of all plant and vendors drawings to cGMP requirements.

· Provide support to Engineering teams and other plant udders in drawings and CAD design requirements.

· Assure Process & Instrumentation Drawing (P&ID) accuracy by conducting routine checks to maintain accuracy of all As Build drawings.

· Provide support to Engineering teams and other plant users in drawings retrieval.

· Assure P&ID accuracy by designing checking and verification process to maintain accuracy of as built drawings.

· Attain all aspects of drawing support requirement through prompt response, quality standard and good services records.

· Support project team on project handover filing, update datasheet and relevant documentation.

· KPI’s include:

o Accuracy of drawing filing / registration

o Updated drawing readiness for audit at all time

o Drawing updating backlog

o Drafting Office housekeeping

Requirements:

· Diploma in Mechanical Engineering with 2 to 10 years’ experience in Refinery/Petrochemical/Chemical/ Power Plants/Pharmaceutical/LNG/Oil & Gas projects.

· Knowledge of Equipment layout Development, Piping layout design for all types of equipment such as Vessels, Exchangers, Tanks, Pumps, Compressors, Heaters, Columns, Reactors, Piping MTO & Package Items etc.

· Familiar and hands on experience with design and drafting tools like 3D PDS/PDMS, Smart Plant Review, MicroStation, AutoCAD, I sketch, MS Office Applications etc.

Duration : 12 months. Option to extend/convert subject to performance review.

Job Description

• Manage a team of technical supervisors on site to ensure that all site activities comply with the regulations and client's requirements.
• To report to C&S QP, works closely with the regulatory authorities and contractors to provide supervision on site, resolve all site issues and ensure timelycompletion of the projects.
• To be competent in carrying out supervision of structural works by identifying any non-conformity of contractor's works on site. The appointed person must havethe strong ability to interpret the drawings and contract documents on works to be carried.
• Appointed person possesses a complete understanding of local requirements, especially to comply with BCA's criteria for build-ability and safety assurancesystem.
• To carry out regular site checks on Builder and ensure compliance on health and work safety in accordance with MOM.
• To manage the site supervisors with respect to C&S engineering works, architectural and MandE engineering works.
• To attend site, progress, variation and coordination meetings Interpret drawings and contract documents on works to be carried.

Job Requirement

• Recognized Degree in Civil/Structural Engineering acceptable for registration with the PE Board, Singapore.
• Accredited with IES/ACES with a valid Resident Engineer Practicing.
• Minimum 8 years’ experience preferably in steel and precast building construction.
• Must be familiar with local Regulations/Codes for Civil and Structural related to building projects.
• Must have experience in condominium project.
• A good team player and experience in leading a team of Resident Technical Officers.
• Carry out regular site checks on Builder and ensure compliance on health and work safety in accordance with MOM.
• Supervision of C&S and Architecture works by identifying any non-conformity of contractor’s works on site.
• Strong ability to interpret the drawings and contract documents on works to be carried.
• Supervision and manage site supervisors with respect to C&S and Architecture Work.
• Ability to resolve site and technical issues, prepare and document detailed site progress reports.

1. Must be able to lead a group of Technicians and Take care of their safe working responsibilities.

2. Guide the subordinates to check and troubleshoot hydraulic systems onboard the vessels

3. Must have strong Knowledge of Hydraulic systems and able to read Hydraulic schematic drawings.

4. Hands-on experience with hydraulic motors, pumps, and their related systems.

5. Familiar with the steering gear systems, deck hydraulic Machinery, ballast and cargo remote control valve operating systems.

6. Able to handle the projects independently and must have knowledge about documentation, project costing, safety formalities etc.,

Role Summary:

• As an Embedded SRE, you will work closely with our development teams to build and maintain scalable, highly available, and fault-tolerant systems.
• You will be integral in shaping the culture of reliability, implementing monitoring and alerting systems, managing changes, automating toils, and enhancing the overall system's resilience through reliability planning and incident management.

Experience:

• Min. 2 years of Development experience in Java/Spring-boot or .Net (Object Oriented)
• Experience Application + Infrastructure Monitoring using monitoring tools like (New Relic/ AppDynamics/Grafana/Kibana/ Prometheus/Splunk etc.)
• Experience in Python, Shell Scripting preferred.

Key Responsibilities:

• Monitoring & Alerting: Implement and improve observability through sophisticated monitoring and alerting systems. Design and manage dashboards and alerts that proactively monitor health, performance, and compliance with agreed-upon SLIs and SLOs.
• Change Management: Champion progressive rollout strategies, detect and resolve problems efficiently, and safely manage rollback/forward processes to maintain system integrity during changes.
• Automation: Develop and implement automation strategies to reduce manual errors, minimize toil, and enhance team velocity.
• Reliability Planning: Engage in planning for both organic and inorganic growth, ensuring optimal utilization of computing resources and scalability of our infrastructure.
• Incident Management: Provide on-call support to address and mitigate incidents rapidly. Lead the practice of chaos engineering to ensure preparedness and effective response strategies.
• Release Engineering: Manage and optimize the continuous delivery process focusing on small, frequent, and safe releases.
• Reliability Consulting: Work alongside development teams to set and review SLIs, SLOs, and error budgets. Offer insights on architectural decisions, system observability, and application performance to enhance reliability.
• Cross-Functional Collaboration: Embrace the "You build it, you run it" philosophy, working across functional teams to ensure reliability and performance from development through production.
• Problem Management: Conduct blameless post-mortems to learn from failures, uncover insights, and socialize findings across the company to foster a culture of continuous improvement.

Qualifications:

• Bachelor's degree in Computer Science, Engineering, or related field.
• Proven experience as an SRE or in a similar operational engineering role.
• Strong understanding of cloud technologies, CI/CD processes, and infrastructure as code.
• Proficiency in scripting languages and automation tools.
• Excellent problem-solving, communication, and teamwork skills.
• Strong experience in programming, and cloud-native development, especially on Azure Kubernetes Services.
• Familiar with Azure components and services.
• Proactive approach to identifying problems, performance bottlenecks, and areas for improvement.

• Carry out the duties required as site supervisor under the Building Control Act and Regulations or other duties as required by other Authorities;
• Conduct site inspections and review, evaluate & assess method statements in relation to the project;
• Supervise and enforce site quality control;
• Experience in supervising geotechnical and deep excavation works.
• Responsible for the co-ordination of site works to ensure construction safety;
• BCA registered with recognized Degree in Civil / Structural Engineering;
• Recognized Degree / Diploma from recognized tertiary institution;
• Registered with IES;
• Minimum 4 years of relevant experience in the supervision of works similar in nature to the civil works;
• Prior LTA project experience is an advantage;
• Only Singaporean / SPR need apply.

• Monitor consultant's design progress as per submission/ detail design schedule agreed. Study consultants' design drawings and highlight the missing information, design clashes, and design inconveniences for construction.
• Manage the project's design coordination works. Liaise with Clients, Consultants, and Subcontractors to ensure the smooth progress of the coordination. Ensure the information between different disciplines is communicated and discussed among the team.
• Manage the project’s drawing coordination between disciplines and sub-contractors drawings
• Manage the project’s drawing schedule, to ensure the timely issuance of drawings for construction
• Work with BIM modeler/drafter on shop drawings preparation, to capture all detail dimensions and settings. Must be able to convey technical information to BIM modeler/ drafter via sketches. Must be able to study and understand technical drawings independently without the drafter's assistance. Must be able to identify the critical technical information/sections that need to be generated for construction usage and technical resolution
• Work with the construction team and sub-cons to prepare and submit for approval the construct i) material submission, ii) material specification submission, iii) method statement, and iv) specialist trade sub-con shop drawings
• Address and resolve technical issues raised by the construction and consultant's teams, through clear communication and good documentation.

Requirements:

• Degree in Civil Engineering or Architectural discipline
• At least 3 years of working experience in the related field is required for this position.
• Experience in residential projects will be advantageous

· Bachelor’s or Master’s degree in Computer Science, Engineering, or a related field.

• Proven experience as an AI Engineer or similar role with a track record of deploying AI solutions, including Generative AI models, in production.

• Strong programming skills in languages such as Python, Java, or C++.

• Proficiency with machine learning frameworks and libraries (e.g., TensorFlow, PyTorch, scikit-learn).

• Experience with data pre-processing, feature engineering, and model evaluation.

• Familiarity with cloud platforms and services (e.g., AWS, Azure, Google Cloud) and their AI/ML tools, especially AWS Bedrock.

• Strong problem-solving skills and the ability to work independently and collaboratively in a fast-paced environment.

• Excellent communication skills, both written and verbal, with the ability to explain complex technical concepts to non-technical stakeholders.

• Experience with Generative AI, NLP, and transformer-based models.

• Knowledge of the Langchain technology stack and AWS Bedrock for Generative AI solutions.

• Familiarity with IT Service Management (ITSM) tools and processes, with the ability to integrate AI-driven automation.

Job Description

• Project Management and sites supervision works.
• Attend project meetings; liaise and coordinate with clients, consultants, relevant authorities and sub-contractors on M&E issues.
• Manage M&E subcontractors’ submission of method statements, drawings, materials, samples, and work progress.
• Compliance with all necessary standards, code of practice and safety regulations.
• Handle any other ad-hoc duties and tasks assigned.

Key Responsibilities

• Follow up on projects from start to finish, including quotation, on-site work, invoicing, and service report.
• Lead technician teams through projects.
• Independently execute engine repairs and overhauls on board and on site.
• Dismantle, repair, replace, and reassemble mechanical parts.
• Troubleshoot and recommend repair solutions for machinery breakdowns.
• Conduct daily toolbox meetings with teams, ensuring safe work practices.
• Complete repairs, maintenance, and overhauls on time.
• Deliver high-quality services to satisfy customers.
• Prepare quotations for new inquiries and manage job costs within budget.
• Prepare service reports after project completion.
• Plan job methods and work schedules.
• Communicate with customers to ensure smooth project completion.
• Coordinate with local or overseas agents for job deployment and preparation.

APPLY NOW!!!

• Diploma or Degree in Mechanical Engineering or equivalent
• 2 years experience. Freshers also can Apply
• Able to work with tight schedules
• Willing to perform hands-on mechanical repairs, installations, and removals
• Willing to work on-site and in workshops with occasional irregular hours